Tweaks Syrlinks HK #565

Merged
muellerr merged 9 commits from tweak_syrlinks_hk into develop 2023-04-04 20:37:54 +02:00
6 changed files with 128 additions and 134 deletions

View File

@ -16,8 +16,16 @@ will consitute of a breaking change warranting a new major release:
# [unreleased]
## Fixed
- Generic HK handling: Bug where HKs were generated a lot more often than required. This is the case
if a device handler `PERFORM_OPERATION` step is performed more than once per PST cycle.
- Syrlinks now goes to `_MODE_TO_ON` when finishing the `doStartUp` transition.
## Changed
- Doubled GS PST interval instead of scheduling everything twice.
- Syrlinks now only has one `PERFORM_OPERATION` step, but still has two communication steps.
- PCDU components only allow setting `NEEDS_RECOVERY`, `HEALTHY` and `EXTERNAL_CONTROL` health
states now. TMP sensor components only allow `HEALTHY` , `EXTERNAL_CONTROL`, `FAULTY` and
`PERMANENT_FAULTY`.

View File

@ -62,9 +62,9 @@
#include "mission/system/acs/acsModeTree.h"
#include "mission/system/com/SyrlinksFdir.h"
#include "mission/system/com/comModeTree.h"
#include "mission/system/power/GomspacePowerFdir.h"
#include "mission/system/fdir/RtdFdir.h"
#include "mission/system/objects/TcsBoardAssembly.h"
#include "mission/system/power/GomspacePowerFdir.h"
#include "mission/system/tree/payloadModeTree.h"
#include "mission/system/tree/tcsModeTree.h"
#include "mission/tmtc/tmFilters.h"

View File

@ -538,7 +538,7 @@ void scheduling::createPstTasks(TaskFactory& factory, TaskDeadlineMissedFunction
FixedTimeslotTaskIF* gomSpacePstTask =
factory.createFixedTimeslotTask("GS_PST_TASK", 65, PeriodicTaskIF::MINIMUM_STACK_SIZE * 4,
0.5, missedDeadlineFunc, &RR_SCHEDULING);
0.25, missedDeadlineFunc, &RR_SCHEDULING);
result = pst::pstGompaceCan(gomSpacePstTask);
if (result != returnvalue::OK) {
if (result != FixedTimeslotTaskIF::SLOT_LIST_EMPTY) {

View File

@ -21,15 +21,15 @@ SyrlinksHandler::~SyrlinksHandler() = default;
void SyrlinksHandler::doStartUp() {
if (internalState == InternalState::OFF) {
transitionCommandPending = false;
internalState = InternalState::ENABLE_TEMPERATURE_PROTECTION;
commandExecuted = false;
}
if (internalState == InternalState::ENABLE_TEMPERATURE_PROTECTION) {
if (commandExecuted) {
// Go to normal mode immediately and disable transmitter on startup.
setMode(_MODE_TO_NORMAL);
setMode(_MODE_TO_ON);
internalState = InternalState::IDLE;
transState = TransitionState::IDLE;
commandExecuted = false;
}
}
@ -37,15 +37,16 @@ void SyrlinksHandler::doStartUp() {
void SyrlinksHandler::doShutDown() {
// In any case, always disable TX first.
if (internalState != InternalState::SET_TX_STANDBY) {
internalState = InternalState::SET_TX_STANDBY;
transitionCommandPending = false;
if (internalState != InternalState::TX_TRANSITION) {
internalState = InternalState::TX_TRANSITION;
transState = TransitionState::SET_TX_STANDBY;
commandExecuted = false;
}
if (internalState == InternalState::SET_TX_STANDBY) {
if (internalState == InternalState::TX_TRANSITION) {
if (commandExecuted) {
temperatureSet.setValidity(false, true);
internalState = InternalState::OFF;
transState = TransitionState::IDLE;
commandExecuted = false;
setMode(_MODE_POWER_DOWN);
}
@ -99,31 +100,44 @@ ReturnValue_t SyrlinksHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
}
ReturnValue_t SyrlinksHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
if (transState == TransitionState::CMD_PENDING or transState == TransitionState::DONE) {
return NOTHING_TO_SEND;
}
switch (internalState) {
case InternalState::ENABLE_TEMPERATURE_PROTECTION: {
*id = syrlinks::WRITE_LCL_CONFIG;
transState = TransitionState::CMD_PENDING;
return buildCommandFromCommand(*id, nullptr, 0);
}
case InternalState::SET_TX_MODULATION: {
case InternalState::TX_TRANSITION: {
switch (transState) {
case TransitionState::SET_TX_MODULATION: {
*id = syrlinks::SET_TX_MODE_MODULATION;
return buildCommandFromCommand(*id, nullptr, 0);
}
case InternalState::SELECT_MODULATION_BPSK: {
case TransitionState::SELECT_MODULATION_BPSK: {
*id = syrlinks::SET_WAVEFORM_BPSK;
return buildCommandFromCommand(*id, nullptr, 0);
}
case InternalState::SELECT_MODULATION_0QPSK: {
case TransitionState::SELECT_MODULATION_0QPSK: {
*id = syrlinks::SET_WAVEFORM_0QPSK;
return buildCommandFromCommand(*id, nullptr, 0);
}
case InternalState::SET_TX_CW: {
case TransitionState::SET_TX_CW: {
*id = syrlinks::SET_TX_MODE_CW;
return buildCommandFromCommand(*id, nullptr, 0);
}
case InternalState::SET_TX_STANDBY: {
case TransitionState::SET_TX_STANDBY: {
*id = syrlinks::SET_TX_MODE_STANDBY;
return buildCommandFromCommand(*id, nullptr, 0);
}
default: {
return NOTHING_TO_SEND;
}
}
transState = TransitionState::CMD_PENDING;
break;
}
default: {
break;
}
@ -622,8 +636,6 @@ void SyrlinksHandler::parseAgcHighByte(const uint8_t* packet) {
agcValueHighByte = convertHexStringToUint8(reinterpret_cast<const char*>(packet + offset));
}
void SyrlinksHandler::setNormalDatapoolEntriesInvalid() {}
uint32_t SyrlinksHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 2500; }
ReturnValue_t SyrlinksHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
@ -652,11 +664,11 @@ ReturnValue_t SyrlinksHandler::initializeLocalDataPool(localpool::DataPool& loca
poolManager.subscribeForDiagPeriodicPacket(
subdp::DiagnosticsHkPeriodicParams(rxDataset.getSid(), enableHkSets, 60.0));
poolManager.subscribeForRegularPeriodicPacket(
subdp::RegularHkPeriodicParams(temperatureSet.getSid(), enableHkSets, 20.0));
subdp::RegularHkPeriodicParams(temperatureSet.getSid(), enableHkSets, 60.0));
return returnvalue::OK;
}
void SyrlinksHandler::setModeNormal() { setMode(MODE_NORMAL); }
void SyrlinksHandler::setModeNormal() { setMode(_MODE_TO_NORMAL); }
float SyrlinksHandler::calcTempVal(uint16_t raw) { return 0.126984 * raw - 67.87; }
@ -675,12 +687,31 @@ ReturnValue_t SyrlinksHandler::handleAckReply(const uint8_t* packet) {
break;
}
case (syrlinks::SET_WAVEFORM_BPSK):
case (syrlinks::SET_WAVEFORM_0QPSK):
case (syrlinks::SET_TX_MODE_STANDBY):
case (syrlinks::SET_TX_MODE_MODULATION):
case (syrlinks::SET_WAVEFORM_0QPSK): {
if (result == returnvalue::OK and isTransitionalMode()) {
transState = TransitionState::SET_TX_MODULATION;
commandExecuted = true;
}
break;
}
case (syrlinks::SET_TX_MODE_STANDBY): {
if (result == returnvalue::OK and isTransitionalMode()) {
transState = TransitionState::DONE;
commandExecuted = true;
}
break;
}
case (syrlinks::SET_TX_MODE_MODULATION): {
if (result == returnvalue::OK and isTransitionalMode()) {
transState = TransitionState::DONE;
commandExecuted = true;
}
break;
}
case (syrlinks::SET_TX_MODE_CW): {
if (result == returnvalue::OK and isTransitionalMode()) {
commandExecuted = true;
transState = TransitionState::DONE;
}
break;
}
@ -704,7 +735,7 @@ ReturnValue_t SyrlinksHandler::handleAckReply(const uint8_t* packet) {
ReturnValue_t SyrlinksHandler::isModeCombinationValid(Mode_t mode, Submode_t submode) {
if (mode == HasModesIF::MODE_ON or mode == DeviceHandlerIF::MODE_NORMAL) {
if (submode >= com::Submode::NUM_SUBMODES) {
if (submode >= com::Submode::NUM_SUBMODES or submode < com::Submode::RX_ONLY) {
return HasModesIF::INVALID_SUBMODE;
}
return returnvalue::OK;
@ -731,72 +762,54 @@ void SyrlinksHandler::setDebugMode(bool enable) { this->debugMode = enable; }
void SyrlinksHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
Mode_t tgtMode = getBaseMode(getMode());
auto commandDone = [&]() {
setMode(tgtMode);
transitionCommandPending = false;
auto doneHandler = [&]() {
internalState = InternalState::IDLE;
transState = TransitionState::IDLE;
DeviceHandlerBase::doTransition(modeFrom, subModeFrom);
};
auto txOnHandler = [&](InternalState selMod) {
if (internalState == InternalState::IDLE) {
transitionCommandPending = false;
commandExecuted = false;
internalState = selMod;
if (transState == TransitionState::DONE) {
return doneHandler();
}
// Select modulation first (BPSK or 0QPSK).
if (internalState == selMod) {
if (commandExecuted) {
transitionCommandPending = false;
internalState = InternalState::SET_TX_MODULATION;
commandExecuted = false;
}
}
// Now go into modulation mode.
if (internalState == InternalState::SET_TX_MODULATION) {
if (commandExecuted) {
commandDone();
return true;
}
}
return false;
};
auto txStandbyHandler = [&]() {
if (internalState == InternalState::IDLE) {
transitionCommandPending = false;
internalState = InternalState::SET_TX_STANDBY;
commandExecuted = false;
txDataset.setReportingEnabled(false);
poolManager.changeCollectionInterval(temperatureSet.getSid(), 60.0);
transState = TransitionState::SET_TX_STANDBY;
internalState = InternalState::TX_TRANSITION;
};
auto txOnHandler = [&](TransitionState tgtTransitionState) {
txDataset.setReportingEnabled(true);
poolManager.changeCollectionInterval(txDataset.getSid(), 10.0);
poolManager.changeCollectionInterval(temperatureSet.getSid(), 5.0);
transState = tgtTransitionState;
internalState = InternalState::TX_TRANSITION;
};
if (tgtMode == HasModesIF::MODE_ON or tgtMode == DeviceHandlerIF::MODE_NORMAL) {
// If submode has not changed, no special transition handling necessary.
if (getSubmode() == subModeFrom) {
return doneHandler();
}
if (internalState == InternalState::SET_TX_STANDBY) {
if (commandExecuted) {
commandDone();
// Transition is on-going, wait for it to finish.
if (transState != TransitionState::IDLE) {
return;
}
}
};
if (tgtMode == HasModesIF::MODE_ON or tgtMode == DeviceHandlerIF::MODE_NORMAL) {
// Transition start logic.
switch (getSubmode()) {
case (com::Submode::RX_AND_TX_DEFAULT_DATARATE): {
auto currentDatarate = com::getCurrentDatarate();
if (currentDatarate == com::Datarate::LOW_RATE_MODULATION_BPSK) {
if (txOnHandler(InternalState::SELECT_MODULATION_BPSK)) {
return;
}
txOnHandler(TransitionState::SELECT_MODULATION_BPSK);
} else if (currentDatarate == com::Datarate::HIGH_RATE_MODULATION_0QPSK) {
if (txOnHandler(InternalState::SELECT_MODULATION_0QPSK)) {
return;
}
txOnHandler(TransitionState::SELECT_MODULATION_0QPSK);
}
break;
}
case (com::Submode::RX_AND_TX_LOW_DATARATE): {
if (txOnHandler(InternalState::SELECT_MODULATION_BPSK)) {
return;
}
txOnHandler(TransitionState::SELECT_MODULATION_BPSK);
break;
}
case (com::Submode::RX_AND_TX_HIGH_DATARATE): {
if (txOnHandler(InternalState::SELECT_MODULATION_0QPSK)) {
return;
}
txOnHandler(TransitionState::SELECT_MODULATION_0QPSK);
break;
}
case (com::Submode::RX_ONLY): {
@ -804,21 +817,17 @@ void SyrlinksHandler::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
return;
}
case (com::Submode::RX_AND_TX_CW): {
if (internalState == InternalState::IDLE) {
internalState = InternalState::SET_TX_STANDBY;
commandExecuted = false;
}
if (commandExecuted) {
commandDone();
return;
}
txOnHandler(TransitionState::SET_TX_CW);
break;
}
default: {
commandDone();
sif::error << "SyrlinksHandler: Unexpected submode " << getSubmode() << std::endl;
DeviceHandlerBase::doTransition(modeFrom, subModeFrom);
}
}
} else if (tgtMode == HasModesIF::MODE_OFF) {
txStandbyHandler();
} else {
return doneHandler();
}
}

View File

@ -46,7 +46,6 @@ class SyrlinksHandler : public DeviceHandlerBase {
size_t* foundLen) override;
ReturnValue_t interpretDeviceReply(DeviceCommandId_t id, const uint8_t* packet) override;
ReturnValue_t getSwitches(const uint8_t** switches, uint8_t* numberOfSwitches) override;
void setNormalDatapoolEntriesInvalid() override;
uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) override;
ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
LocalDataPoolManager& poolManager) override;
@ -112,22 +111,26 @@ class SyrlinksHandler : public DeviceHandlerBase {
float tempPowerAmplifier = 0;
float tempBasebandBoard = 0;
bool commandExecuted = false;
bool transitionCommandPending = false;
uint8_t commandBuffer[syrlinks::MAX_COMMAND_SIZE];
enum class InternalState {
OFF,
ENABLE_TEMPERATURE_PROTECTION,
TX_TRANSITION,
IDLE
} internalState = InternalState::OFF;
enum class TransitionState {
IDLE,
SELECT_MODULATION_BPSK,
SELECT_MODULATION_0QPSK,
SET_TX_MODULATION,
SET_TX_CW,
SET_TX_STANDBY,
IDLE
};
InternalState internalState = InternalState::OFF;
CMD_PENDING,
DONE
} transState = TransitionState::IDLE;
/**
* This object is used to store the id of the next command to execute. This controls the

View File

@ -26,8 +26,7 @@ ReturnValue_t pst::pstSyrlinks(FixedTimeslotTaskIF *thisSequence) {
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.25, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.25, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.4,
DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.4, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.4, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::SYRLINKS_HANDLER, length * 0.75, DeviceHandlerIF::SEND_READ);
@ -114,40 +113,15 @@ ReturnValue_t pst::pstGompaceCan(FixedTimeslotTaskIF *thisSequence) {
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.25, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.25, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.25, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.25, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.5, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.5, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.5, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.5, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.25, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.25, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.25, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.25, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.5, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.5, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.5, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.5, DeviceHandlerIF::PERFORM_OPERATION);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.5, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.5, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.5, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.5, DeviceHandlerIF::SEND_WRITE);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.5, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.5, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.5, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.5, DeviceHandlerIF::GET_WRITE);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.75, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.75, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.75, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.75, DeviceHandlerIF::SEND_READ);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.75, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.75, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.75, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.75, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::P60DOCK_HANDLER, length * 0.5, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU1_HANDLER, length * 0.5, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::PDU2_HANDLER, length * 0.5, DeviceHandlerIF::GET_READ);
thisSequence->addSlot(objects::ACU_HANDLER, length * 0.5, DeviceHandlerIF::GET_READ);
if (thisSequence->checkSequence() != returnvalue::OK) {
sif::error << "GomSpace PST initialization failed" << std::endl;
return returnvalue::FAILED;