PAPB VC Simplification #661

Merged
meierj merged 4 commits from papb-vc-if-simplification into v4.0.0-dev 2023-05-31 16:32:50 +02:00
3 changed files with 13 additions and 81 deletions

View File

@ -29,6 +29,7 @@ TODO: New firmware package version.
## Changed ## Changed
- Removed PTME busy/ready signals. Those were not used anyway because register reads are used now. - Removed PTME busy/ready signals. Those were not used anyway because register reads are used now.
- APB bus access busy checking is not done anymore as this is performed by the bus itself now.
# [v3.0.0] to be released # [v3.0.0] to be released

View File

@ -28,56 +28,16 @@ ReturnValue_t PapbVcInterface::write(const uint8_t* data, size_t size) {
if (size < 4) { if (size < 4) {
return returnvalue::FAILED; return returnvalue::FAILED;
} }
if (pollInterfaceReadiness(0, true) == returnvalue::OK) { if (pollReadyForPacket()) {
startPacketTransfer(ByteWidthCfg::ONE); startPacketTransfer(ByteWidthCfg::ONE);
} else { } else {
return DirectTmSinkIF::IS_BUSY; return DirectTmSinkIF::IS_BUSY;
} }
// TODO: This should work but does not.. :(
// size_t idx = 0;
// while (idx < size) {
//
// nanosleep(&BETWEEN_POLL_DELAY, &remDelay);
// if ((size - idx) < 4) {
// *vcBaseReg = CONFIG_DATA_INPUT | (size - idx - 1);
// usleep(1);
// }
// if (pollPapbBusySignal(2) == returnvalue::OK) {
// // vcBaseReg + DATA_REG_OFFSET + 3 = static_cast<uint8_t>(data + idx);
// // vcBaseReg + DATA_REG_OFFSET + 2 = static_cast<uint8_t>(data + idx + 1);
// // vcBaseReg + DATA_REG_OFFSET + 1 = static_cast<uint8_t>(data + idx + 2);
// // vcBaseReg + DATA_REG_OFFSET = static_cast<uint8_t>(data + idx + 3);
//
// // std::memcpy((vcBaseReg + DATA_REG_OFFSET), data + idx , nextWriteSize);
// *(vcBaseReg + DATA_REG_OFFSET) = *reinterpret_cast<const uint32_t*>(data + idx);
// //uint8_t* byteReg = reinterpret_cast<uint8_t*>(vcBaseReg + DATA_REG_OFFSET);
//
// //byteReg[0] = data[idx];
// //byteReg[1] = data[idx];
// } else {
// abortPacketTransfer();
// return returnvalue::FAILED;
// }
// // TODO: Change this after the bugfix. Right now, the PAPB ignores the content of the byte
// // width configuration.5
// // It's okay to increment by a larger amount for the last segment here, loop will be over
// // in any case.
// idx += 4;
// }
for (size_t idx = 0; idx < size; idx++) { for (size_t idx = 0; idx < size; idx++) {
if (pollInterfaceReadiness(2, false) == returnvalue::OK) { // if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
*(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]); *(vcBaseReg + DATA_REG_OFFSET) = static_cast<uint32_t>(data[idx]);
} else {
abortPacketTransfer();
return returnvalue::FAILED;
}
}
if (pollInterfaceReadiness(2, false) == returnvalue::OK) {
completePacketTransfer();
} else {
abortPacketTransfer();
return returnvalue::FAILED;
} }
completePacketTransfer();
return returnvalue::OK; return returnvalue::OK;
} }
@ -87,40 +47,12 @@ void PapbVcInterface::startPacketTransfer(ByteWidthCfg initWidth) {
void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; } void PapbVcInterface::completePacketTransfer() { *vcBaseReg = CONFIG_END; }
ReturnValue_t PapbVcInterface::pollInterfaceReadiness(uint32_t maxPollRetries, bool PapbVcInterface::pollReadyForPacket() const {
bool checkReadyForPacketState) const { // Check if PAPB interface is ready to receive data. Use the configuration register for this.
uint32_t busyIdx = 0; // Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
nextDelay.tv_nsec = FIRST_DELAY_PAPB_POLLING_NS; uint32_t reg = *vcBaseReg;
// bool busy = (reg >> 5) & 0b1;
while (true) { return (reg >> 6) & 0b1;
// Check if PAPB interface is ready to receive data. Use the configuration register for this.
// Bit 5, see PTME ptme_001_01-0-7-r2 Table 31.
uint32_t reg = *vcBaseReg;
bool busy = (reg >> 5) & 0b1;
bool readyForPacket = (reg >> 6) & 0b1;
if (checkReadyForPacketState) {
if (not busy and readyForPacket) {
return returnvalue::OK;
} else if (not busy and not readyForPacket) {
return PAPB_BUSY;
}
} else if (not busy) {
return returnvalue::OK;
}
busyIdx++;
if (busyIdx >= maxPollRetries) {
return PAPB_BUSY;
}
// Ignore signal handling here for now.
nanosleep(&nextDelay, &remDelay);
// Adaptive delay.
if (nextDelay.tv_nsec * 2 <= MAX_DELAY_PAPB_POLLING_NS) {
nextDelay.tv_nsec *= 2;
}
}
return returnvalue::OK;
} }
bool PapbVcInterface::isVcInterfaceBufferEmpty() { bool PapbVcInterface::isVcInterfaceBufferEmpty() {
@ -141,7 +73,7 @@ bool PapbVcInterface::isVcInterfaceBufferEmpty() {
return false; return false;
} }
bool PapbVcInterface::isBusy() const { return pollInterfaceReadiness(0, true) == PAPB_BUSY; } bool PapbVcInterface::isBusy() const { return not pollReadyForPacket(); }
void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); } void PapbVcInterface::cancelTransfer() { abortPacketTransfer(); }

View File

@ -116,8 +116,7 @@ class PapbVcInterface : public VirtualChannelIF {
* *
* @return returnvalue::OK when ready to receive data else PAPB_BUSY. * @return returnvalue::OK when ready to receive data else PAPB_BUSY.
*/ */
inline ReturnValue_t pollInterfaceReadiness(uint32_t maxPollRetries, inline bool pollReadyForPacket() const;
bool checkReadyForPacketState) const;
/** /**
* @brief This function can be used for debugging to check whether there are packets in * @brief This function can be used for debugging to check whether there are packets in