chonky #670

Merged
muellerr merged 278 commits from v3.0.0-dev into main 2023-06-11 14:25:21 +02:00
11 changed files with 127 additions and 48 deletions
Showing only changes of commit af77d083fa - Show all commits

View File

@ -34,10 +34,12 @@ will consitute of a breaking change warranting a new major release:
on the same system.
- Add ACS board for EM by default now.
- Add support for MPSoC HK packet.
- Add support for MPSoC Flash Directory Content Report.
- Dynamically enable and disable HK packets for MPSoC on `ON` and `OFF` commands.
- Add support for MPSoC Flash Directory Content Report.
- Larger allowed path and file sizes for STR and PLOC MPSoC modules.
- More robust MPSoC flash read and write command data handling.
- Increase frequency of payload handlers from 0.8 seconds to 0.5 seconds.
## Added
@ -51,6 +53,13 @@ will consitute of a breaking change warranting a new major release:
16505 type.
- Host build is working again. Added reduced live TM helper which schedules the PUS and CFDP
funnel.
- PLOC Supervisor handler now has a power switcher assigned to make PLOC power switching work
without an additional PCDU power switch command.
- The PLOC Supervisor handler now waits for the replies to the `SET_TIME` command to verify working
communication.
- The PLOC MPSoC now waits 10 cycles before going to on. These wait cycles are necessary because
the MPSoC is not ready to process commands without this additional boot time.
- Fixed correction for `GPS Altitude` in case the sensor data is out of the expected bonds.
# [v2.0.5] 2023-05-11

View File

@ -644,6 +644,7 @@ void ObjectFactory::createPayloadComponents(LinuxLibgpioIF* gpioComIF, PowerSwit
auto* supvHandler = new PlocSupervisorHandler(objects::PLOC_SUPERVISOR_HANDLER, supervisorCookie,
Gpio(gpioIds::ENABLE_SUPV_UART, gpioComIF),
power::PDU1_CH6_PLOC_12V, *supvHelper);
supvHandler->setPowerSwitcher(&pwrSwitch);
supvHandler->connectModeTreeParent(satsystem::payload::SUBSYSTEM);
#endif /* OBSW_ADD_PLOC_SUPERVISOR == 1 */
static_cast<void>(consumer);

View File

@ -366,7 +366,7 @@ void scheduling::initTasks() {
#endif /* OBSW_ADD_PLOC_SUPERVISOR */
PeriodicTaskIF* plTask = factory->createPeriodicTask(
"PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.8, missedDeadlineFunc, &RR_SCHEDULING);
"PL_TASK", 25, PeriodicTaskIF::MINIMUM_STACK_SIZE, 0.5, missedDeadlineFunc, &RR_SCHEDULING);
plTask->addComponent(objects::CAM_SWITCHER);
scheduling::addMpsocSupvHandlers(plTask);
scheduling::scheduleScexDev(plTask);

View File

@ -52,12 +52,12 @@ void ObjectFactory::produce(void* args) {
// level components.
dummy::DummyCfg dummyCfg;
dummyCfg.addCoreCtrlCfg = false;
dummyCfg.addCamSwitcherDummy = false;
#if OBSW_ADD_SYRLINKS == 1
dummyCfg.addSyrlinksDummies = false;
#endif
#if OBSW_ADD_PLOC_SUPERVISOR == 1 || OBSW_ADD_PLOC_MPSOC == 1
dummyCfg.addPlocDummies = false;
dummyCfg.addCamSwitcherDummy = false;
#endif
#if OBSW_ADD_GOMSPACE_PCDU == 1
dummyCfg.addPowerDummies = false;

View File

@ -1,3 +1,4 @@
#include <fsfw/globalfunctions/arrayprinter.h>
#include <linux/payload/PlocMpsocHandler.h>
#include <linux/payload/plocSupvDefs.h>
@ -104,6 +105,7 @@ void PlocMPSoCHandler::performOperationHook() {
ReturnValue_t PlocMPSoCHandler::executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
const uint8_t* data, size_t size) {
ReturnValue_t result = returnvalue::OK;
commandIsPending = true;
switch (actionId) {
case mpsoc::SET_UART_TX_TRISTATE: {
uartIsolatorSwitch.pullLow();
@ -165,33 +167,48 @@ ReturnValue_t PlocMPSoCHandler::executeAction(ActionId_t actionId, MessageQueueI
}
void PlocMPSoCHandler::doStartUp() {
if (startupState == StartupState::IDLE) {
startupState = StartupState::HW_INIT;
}
if (startupState == StartupState::HW_INIT) {
#ifdef XIPHOS_Q7S
#if not OBSW_MPSOC_JTAG_BOOT == 1
switch (powerState) {
case PowerState::OFF:
commandActionHelper.commandAction(supervisorHandler, supv::START_MPSOC);
powerState = PowerState::BOOTING;
break;
return;
case PowerState::ON:
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
uartIsolatorSwitch.pullHigh();
startupState = StartupState::WAIT_CYCLES;
break;
default:
break;
return;
}
#else
powerState = PowerState::ON;
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
uartIsolatorSwitch.pullHigh();
startupState = StartupState::WAIT_CYCLES;
#endif /* not MSPOC_JTAG_BOOT == 1 */
#else
startupState = StartupState::WAIT_CYCLES;
powerState = PowerState::ON;
hkReport.setReportingEnabled(true);
setMode(_MODE_TO_ON);
#endif /* XIPHOS_Q7S */
}
// Need to wait, MPSoC still not booted properly, requesting HK without these wait cycles does
// not work, no replies..
if (startupState == StartupState::WAIT_CYCLES) {
waitCycles++;
if (waitCycles >= 8) {
startupState = StartupState::DONE;
waitCycles = 0;
}
}
if (startupState == StartupState::DONE) {
setMode(_MODE_TO_ON);
hkReport.setReportingEnabled(true);
startupState = StartupState::IDLE;
}
}
void PlocMPSoCHandler::doShutDown() {
#ifdef XIPHOS_Q7S
@ -218,12 +235,17 @@ void PlocMPSoCHandler::doShutDown() {
powerState = PowerState::OFF;
#endif
#endif
startupState = StartupState::IDLE;
}
Review

How do we ever get to PowerState::OFF, if we return here? Is that not needed for this configuration?

How do we ever get to PowerState::OFF, if we return here? Is that not needed for this configuration?
Review

This is done by the supervisor, so when the action reply arrive, the power state will go to OFF. Some sort of timeout is missing though..

This is done by the supervisor, so when the action reply arrive, the power state will go to OFF. Some sort of timeout is missing though..
ReturnValue_t PlocMPSoCHandler::buildNormalDeviceCommand(DeviceCommandId_t* id) {
if (not commandIsPending) {
*id = mpsoc::TC_GET_HK_REPORT;
commandIsPending = true;
return buildCommandFromCommand(*id, nullptr, 0);
}
return NOTHING_TO_SEND;
}
ReturnValue_t PlocMPSoCHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
return NOTHING_TO_SEND;
@ -345,9 +367,9 @@ void PlocMPSoCHandler::fillCommandAndReplyMap() {
this->insertInReplyMap(mpsoc::ACK_REPORT, 3, nullptr, mpsoc::SIZE_ACK_REPORT);
this->insertInReplyMap(mpsoc::EXE_REPORT, 3, nullptr, mpsoc::SIZE_EXE_REPORT);
this->insertInReplyMap(mpsoc::TM_MEMORY_READ_REPORT, 2, nullptr, mpsoc::SIZE_TM_MEM_READ_REPORT);
this->insertInReplyMap(mpsoc::TM_GET_HK_REPORT, 2, nullptr, mpsoc::SIZE_TM_HK_REPORT);
this->insertInReplyMap(mpsoc::TM_GET_HK_REPORT, 5, nullptr, mpsoc::SIZE_TM_HK_REPORT);
this->insertInReplyMap(mpsoc::TM_CAM_CMD_RPT, 2, nullptr, mpsoc::SP_MAX_SIZE);
this->insertInReplyMap(mpsoc::TM_FLASH_DIRECTORY_CONTENT, 2, nullptr, 0);
this->insertInReplyMap(mpsoc::TM_FLASH_DIRECTORY_CONTENT, 2, nullptr, mpsoc::SP_MAX_SIZE);
}
ReturnValue_t PlocMPSoCHandler::scanForReply(const uint8_t* start, size_t remainingSize,
@ -403,13 +425,14 @@ ReturnValue_t PlocMPSoCHandler::scanForReply(const uint8_t* start, size_t remain
*foundId = mpsoc::EXE_REPORT;
break;
default: {
sif::debug << "PlocMPSoCHandler::scanForReply: Reply has invalid apid" << std::endl;
sif::debug << "PlocMPSoCHandler::scanForReply: Reply has invalid APID 0x" << std::hex
<< std::setfill('0') << std::setw(2) << apid << std::dec << std::endl;
*foundLen = remainingSize;
return MPSoCReturnValuesIF::INVALID_APID;
}
}
uint16_t recvSeqCnt = (*(start + 2) << 8 | *(start + 3)) & PACKET_SEQUENCE_COUNT_MASK;
uint16_t recvSeqCnt = ((*(start + 2) << 8) | *(start + 3)) & PACKET_SEQUENCE_COUNT_MASK;
if (recvSeqCnt != sequenceCount) {
triggerEvent(MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH, sequenceCount, recvSeqCnt);
sequenceCount = recvSeqCnt;
@ -469,13 +492,14 @@ void PlocMPSoCHandler::setNormalDatapoolEntriesInvalid() {
hkReport.setValidity(false, true);
}
uint32_t PlocMPSoCHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 5000; }
uint32_t PlocMPSoCHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 10000; }
ReturnValue_t PlocMPSoCHandler::initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
LocalDataPoolManager& poolManager) {
localDataPoolMap.emplace(mpsoc::poolid::STATUS, &peStatus);
localDataPoolMap.emplace(mpsoc::poolid::MODE, &peMode);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_PWR_ON, &peDownlinkPwrOn);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_REPLY_ACTIIVE, &peDownlinkReplyActive);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_JESD_SYNC_STATUS, &peDownlinkJesdSyncStatus);
localDataPoolMap.emplace(mpsoc::poolid::DOWNLINK_DAC_STATUS, &peDownlinkDacStatus);
localDataPoolMap.emplace(mpsoc::poolid::CAM_STATUS, &peCameraStatus);
@ -493,6 +517,7 @@ ReturnValue_t PlocMPSoCHandler::initializeLocalDataPool(localpool::DataPool& loc
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_MB3V3, &peSysmonMb3V3);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_MB1V8, &peSysmonMb1V8);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC12V, &peSysmonVcc12V);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC5V, &peSysmonVcc5V);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC3V3, &peSysmonVcc3V3);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC3V3VA, &peSysmonVcc3V3VA);
localDataPoolMap.emplace(mpsoc::poolid::SYSMON_VCC2V5DDR, &peSysmonVcc2V5DDR);
@ -611,13 +636,12 @@ ReturnValue_t PlocMPSoCHandler::prepareTcDownlinkPwrOff() {
}
ReturnValue_t PlocMPSoCHandler::prepareTcGetHkReport() {
ReturnValue_t result = returnvalue::OK;
mpsoc::TcGetHkReport tcDownlinkPwrOff(spParams, sequenceCount);
result = tcDownlinkPwrOff.buildPacket();
mpsoc::TcGetHkReport tcGetHkReport(spParams, sequenceCount);
ReturnValue_t result = tcGetHkReport.buildPacket();
if (result != returnvalue::OK) {
return result;
}
finishTcPrep(tcDownlinkPwrOff.getFullPacketLen());
finishTcPrep(tcGetHkReport.getFullPacketLen());
return returnvalue::OK;
}
@ -793,8 +817,23 @@ ReturnValue_t PlocMPSoCHandler::handleExecutionReport(const uint8_t* data) {
uint16_t apid = (*(data) << 8 | *(data + 1)) & APID_MASK;
auto cmdDoneHandler = [&](bool success) {
if (normalCmdPending) {
normalCmdPending = false;
}
commandIsPending = false;
auto commandIter = deviceCommandMap.find(getPendingCommand());
if (commandIter != deviceCommandMap.end()) {
commandIter->second.isExecuting = false;
if (commandIter->second.sendReplyTo != MessageQueueIF::NO_QUEUE) {
actionHelper.finish(success, commandIter->second.sendReplyTo, getPendingCommand(), result);
}
}
disableAllReplies();
};
switch (apid) {
case (mpsoc::apid::EXE_SUCCESS): {
cmdDoneHandler(true);
break;
}
case (mpsoc::apid::EXE_FAILURE): {
@ -810,8 +849,8 @@ ReturnValue_t PlocMPSoCHandler::handleExecutionReport(const uint8_t* data) {
}
printStatus(data);
sendFailureReport(mpsoc::EXE_REPORT, MPSoCReturnValuesIF::RECEIVED_EXE_FAILURE);
disableExeReportReply();
result = IGNORE_REPLY_DATA;
cmdDoneHandler(false);
break;
}
default: {
@ -1159,6 +1198,14 @@ void PlocMPSoCHandler::setNextReplyId() {
case mpsoc::TC_MEM_READ:
nextReplyId = mpsoc::TM_MEMORY_READ_REPORT;
break;
case mpsoc::TC_FLASH_GET_DIRECTORY_CONTENT: {
nextReplyId = mpsoc::TM_FLASH_DIRECTORY_CONTENT;
break;
}
case mpsoc::TC_GET_HK_REPORT: {
nextReplyId = mpsoc::TM_GET_HK_REPORT;
break;
}
default:
/* If no telemetry is expected the next reply is always the execution report */
nextReplyId = mpsoc::EXE_REPORT;
@ -1387,12 +1434,12 @@ void PlocMPSoCHandler::disableExeReportReply() {
}
void PlocMPSoCHandler::printStatus(const uint8_t* data) {
uint16_t status = *(data + STATUS_OFFSET) << 8 | *(data + STATUS_OFFSET + 1);
uint16_t status = (*(data + STATUS_OFFSET) << 8) | *(data + STATUS_OFFSET + 1);
sif::info << "Verification report status: " << getStatusString(status) << std::endl;
}
uint16_t PlocMPSoCHandler::getStatus(const uint8_t* data) {
return *(data + STATUS_OFFSET) << 8 | *(data + STATUS_OFFSET + 1);
return (*(data + STATUS_OFFSET) << 8) | *(data + STATUS_OFFSET + 1);
}
void PlocMPSoCHandler::handleActionCommandFailure(ActionId_t actionId) {

View File

@ -108,6 +108,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
mpsoc::HkReport hkReport;
bool normalCmdPending = false;
MessageQueueIF* eventQueue = nullptr;
MessageQueueIF* commandActionHelperQueue = nullptr;
@ -117,7 +118,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
SpacePacketCreator creator;
ploc::SpTcParams spParams = ploc::SpTcParams(creator);
PoolEntry<uint8_t> peStatus = PoolEntry<uint8_t>();
PoolEntry<uint32_t> peStatus = PoolEntry<uint32_t>();
PoolEntry<uint8_t> peMode = PoolEntry<uint8_t>();
PoolEntry<uint8_t> peDownlinkPwrOn = PoolEntry<uint8_t>();
PoolEntry<uint8_t> peDownlinkReplyActive = PoolEntry<uint8_t>();
@ -168,6 +169,7 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
// Used to block incoming commands when MPSoC helper class is currently executing a command
bool plocMPSoCHelperExecuting = false;
bool commandIsPending = false;
struct TmMemReadReport {
static const uint8_t FIX_SIZE = 14;
@ -183,7 +185,9 @@ class PlocMPSoCHandler : public DeviceHandlerBase, public CommandsActionsIF {
size_t foundPacketLen = 0;
TelemetryBuffer tmBuffer;
uint32_t waitCycles = 0;
enum class StartupState { IDLE, HW_INIT, WAIT_CYCLES, DONE } startupState = StartupState::IDLE;
enum class PowerState { OFF, BOOTING, SHUTDOWN, ON };
PowerState powerState = PowerState::OFF;

View File

@ -151,7 +151,7 @@ void PlocSupervisorHandler::doStartUp() {
}
}
}
if (startupState == StartupState::SET_TIME_EXECUTING) {
if (startupState == StartupState::TIME_WAS_SET) {
startupState = StartupState::ON;
}
if (startupState == StartupState::ON) {
@ -176,7 +176,7 @@ ReturnValue_t PlocSupervisorHandler::buildNormalDeviceCommand(DeviceCommandId_t*
ReturnValue_t PlocSupervisorHandler::buildTransitionDeviceCommand(DeviceCommandId_t* id) {
if (startupState == StartupState::SET_TIME) {
*id = supv::SET_TIME_REF;
startupState = StartupState::SET_TIME_EXECUTING;
startupState = StartupState::WAIT_FOR_TIME_REPLY;
return buildCommandFromCommand(*id, nullptr, 0);
}
return NOTHING_TO_SEND;
@ -1909,6 +1909,10 @@ ReturnValue_t PlocSupervisorHandler::handleExecutionSuccessReport(ExecutionRepor
case supv::SET_TIME_REF: {
// We could only allow proper bootup when the time was set successfully, but
// this makes debugging difficult.
if (startupState == StartupState::WAIT_FOR_TIME_REPLY) {
startupState = StartupState::TIME_WAS_SET;
}
break;
}
default:

View File

@ -99,7 +99,14 @@ class PlocSupervisorHandler : public DeviceHandlerBase {
static const uint32_t MRAM_DUMP_TIMEOUT = 60000;
// 4 s
static const uint32_t BOOT_TIMEOUT = 4000;
enum class StartupState : uint8_t { OFF, BOOTING, SET_TIME, SET_TIME_EXECUTING, ON };
enum class StartupState : uint8_t {
OFF,
BOOTING,
SET_TIME,
WAIT_FOR_TIME_REPLY,
TIME_WAS_SET,
ON
};
static constexpr bool SET_TIME_DURING_BOOT = true;

View File

@ -85,7 +85,6 @@ static const DeviceCommandId_t TC_FLASH_GET_DIRECTORY_CONTENT = 28;
static const DeviceCommandId_t TM_FLASH_DIRECTORY_CONTENT = 29;
static constexpr DeviceCommandId_t TC_FLASH_READ_FULL_FILE = 30;
// Will reset the sequence count of the OBSW
static const DeviceCommandId_t OBSW_RESET_SEQ_COUNT = 50;
@ -128,7 +127,10 @@ static const uint16_t ACK_FAILURE = 0x401;
static const uint16_t EXE_SUCCESS = 0x402;
static const uint16_t EXE_FAILURE = 0x403;
static const uint16_t TM_MEMORY_READ_REPORT = 0x404;
<<<<<<< HEAD
static const uint16_t TM_FLASH_READ_REPORT = 0x405;
=======
>>>>>>> origin/v2.1.0-dev
static constexpr uint16_t TM_FLASH_DIRECTORY_CONTENT = 0x406;
static const uint16_t TM_CAM_CMD_RPT = 0x407;
static constexpr uint16_t TM_HK_GET_REPORT = 0x408;
@ -660,9 +662,6 @@ class TcDownlinkPwrOn : public TcBase {
}
};
/**
* @brief Class to build replay stop space packet.
*/
class TcGetHkReport : public TcBase {
public:
TcGetHkReport(ploc::SpTcParams params, uint16_t sequenceCount)
@ -676,12 +675,21 @@ class TcGetDirContent : public TcBase {
ReturnValue_t initPacket(const uint8_t* commandData, size_t commandDataLen) {
ReturnValue_t result = returnvalue::OK;
<<<<<<< HEAD
spParams.setFullPayloadLen(commandDataLen + sizeof(NULL_TERMINATOR) + CRC_SIZE);
=======
// Yeah it needs to be 256.. even if the path is shorter.
spParams.setFullPayloadLen(256 + CRC_SIZE);
>>>>>>> origin/v2.1.0-dev
if (result != returnvalue::OK) {
return result;
}
std::memcpy(payloadStart, commandData, commandDataLen);
<<<<<<< HEAD
*(payloadStart + commandDataLen) = NULL_TERMINATOR;
=======
payloadStart[255] = '\0';
>>>>>>> origin/v2.1.0-dev
return result;
}
};
@ -987,8 +995,7 @@ class HkReport : public StaticLocalDataSet<36> {
lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_UNCORRECTABLE_ERRS, this);
lp_var_t<uint16_t> semCorrectableErrs =
lp_var_t<uint16_t>(sid.objectId, mpsoc::poolid::SEM_CORRECTABLE_ERRS, this);
lp_var_t<uint8_t> semStatus =
lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::SEM_CORRECTABLE_ERRS, this);
lp_var_t<uint8_t> semStatus = lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::SEM_STATUS, this);
lp_var_t<uint8_t> rebootMpsocRequired =
lp_var_t<uint8_t>(sid.objectId, mpsoc::poolid::REBOOT_MPSOC_REQUIRED, this);
};

View File

@ -573,7 +573,7 @@ void SensorProcessing::processGps(const double gpsLatitude, const double gpsLong
// Altitude FDIR
if (gpsAltitude > gpsParameters->maximumFdirAltitude ||
gpsAltitude < gpsParameters->maximumFdirAltitude) {
gpsAltitude < gpsParameters->minimumFdirAltitude) {
altitude = gpsParameters->fdirAltitude;
} else {
altitude = gpsAltitude;

2
tmtc

@ -1 +1 @@
Subproject commit 13fd9a7d84645535496e9ff2855118e5d0b59916
Subproject commit dd3e4c649b687ea6b9444389439f3f2d5a558ad2