eive-obsw/linux/ipcore/PdecConfig.h
Jakob Meier 5db1f71854
Some checks failed
EIVE/eive-obsw/pipeline/head There was a failure building this commit
EIVE/eive-obsw/pipeline/pr-develop There was a failure building this commit
run clang formatting script
2023-02-23 15:27:24 +01:00

132 lines
4.1 KiB
C++

#ifndef LINUX_OBC_PDECCONFIG_H_
#define LINUX_OBC_PDECCONFIG_H_
#include <string>
#include "bsp_q7s/fs/SdCardManager.h"
#include "bsp_q7s/memory/LocalParameterHandler.h"
#include "fsfw/returnvalues/returnvalue.h"
#include "pdec.h"
/**
* @brief This class generates the configuration words for the configuration memory of the PDEC
* IP Cores.
*
* @details Fields are initialized according to specification in PDEC datasheet section 6.11.3.1
* PROM usage.
*
* @author J. Meier
*/
class PdecConfig {
public:
/**
* @brief Constructor
*/
PdecConfig();
virtual ~PdecConfig();
/**
* @brief Sets the memory base address pointer
*/
void setMemoryBaseAddress(uint32_t* memoryBaseAddress_);
/**
* @brief Will write the config to the PDEC configuration memory. New config
* becomes active after resetting PDEC.
*/
ReturnValue_t write();
/**
* @brief Returns the value to write to the interrupt mask register. This
* value defines which interrupts should be enabled/disabled.
*/
uint32_t getImrReg();
ReturnValue_t setPositiveWindow(uint8_t pw);
ReturnValue_t setNegativeWindow(uint8_t nw);
ReturnValue_t getPositiveWindow(uint8_t& positiveWindow);
ReturnValue_t getNegativeWindow(uint8_t& negativeWindow);
private:
// TC transfer frame configuration parameters
static const uint8_t VERSION_ID = 0;
// BD Frames
static const uint8_t BYPASS_FLAG = 1;
static const uint8_t CONTROL_COMMAND_FLAG = 0;
static const uint8_t VIRTUAL_CHANNEL = 0;
static const uint8_t RESERVED_FIELD_A = 0;
static const uint16_t SPACECRAFT_ID = 0x3DC;
static const uint16_t DUMMY_BITS = 0;
static const uint8_t HIGH_AU_MAP_ID = 0xF;
static const uint8_t ENABLE_DERANDOMIZER = 1;
static const uint8_t CONFIG_WORDS_NUM = 2;
// 0x200 / 4 = 0x80
static const uint32_t FRAME_HEADER_OFFSET = 0x80;
static const uint32_t MAP_ADDR_LUT_OFFSET = 0xA0;
static const uint32_t MAP_CLK_FREQ_OFFSET = 0x90;
// MAP clock frequency. Must be a value between 1 and 13 otherwise the TC segment will be
// discarded
static const uint8_t MAP_CLK_FREQ = 2;
static const uint8_t MAX_MAP_ADDR = 63;
// Writing this to the map address in the look up table will invalidate a MAP ID.
static const uint8_t NO_DESTINATION = 0;
static const uint8_t VALID_POSITION = 6;
static const uint8_t PARITY_POSITION = 7;
/**
* TCs with map addresses (also know as Map IDs) assigned to this channel will be stored in
* the PDEC memory.
*/
static const uint8_t PM_BUFFER = 7;
uint32_t* memoryBaseAddress = nullptr;
// Pointer to object providing access to persistent configuration parameters
LocalParameterHandler localParameterHandler;
uint32_t configWords[CONFIG_WORDS_NUM];
bool enableTcNewIrq = true;
bool enableTcAbortIrq = true;
bool enableNewFarIrq = true;
ReturnValue_t initializePersistentParameters();
/**
* @brief If the json file containing the persistent config parameters does
* not exist it will be created here.
*/
ReturnValue_t createPersistentConfig();
ReturnValue_t writeFrameHeaderFirstOctet();
ReturnValue_t writeFrameHeaderSecondOctet();
void writeMapConfig();
/**
* @brief This function calculates the entry for the configuration of the MAP ID routing.
*
* @param mapAddr The MAP ID to configure
* @param moduleId The destination module where all TCs with the map id mapAddr will be routed
* to.
*
* @details The PDEC has different modules where the TCs can be routed to. A lookup table is
* used which links the MAP ID field to the destination module. The entry for this
* lookup table is created by this function and must be stored in the configuration
* memory region of the PDEC. The entry has a specific format
*/
uint8_t calcMapAddrEntry(uint8_t moduleId);
/**
* @brief This functions calculates the odd parity of the bits in number.
*
* @param number The number from which to calculate the odd parity.
*/
uint8_t getOddParity(uint8_t number);
};
#endif /* LINUX_OBC_PDECCONFIG_H_ */