eive-obsw/mission/controller/tcsDefs.h
Robin Mueller 13e965948c
All checks were successful
EIVE/eive-obsw/pipeline/pr-main This commit looks good
TCS observability
2023-07-11 13:52:41 +02:00

353 lines
14 KiB
C++

#ifndef MISSION_CONTROLLER_CONTROLLERDEFINITIONS_THERMALCONTROLLERDEFINITIONS_H_
#define MISSION_CONTROLLER_CONTROLLERDEFINITIONS_THERMALCONTROLLERDEFINITIONS_H_
#include <fsfw/datapoollocal/LocalPoolVariable.h>
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
#include "eive/eventSubsystemIds.h"
#include "mission/tcs/defs.h"
namespace tcsCtrl {
/**
* NOP Limit: Hard limit for device, usually from datasheet. Device damage is possible lif NOP limit
* is exceeded.
* OP Limit: Soft limit. Device should be switched off or TCS controller should take action if the
* limit is exceeded to avoid reaching NOP limit
*/
struct TempLimits {
TempLimits(float nopLowerLimit, float opLowerLimit, float cutOffLimit, float opUpperLimit,
float nopUpperLimit)
: opLowerLimit(opLowerLimit),
opUpperLimit(opUpperLimit),
cutOffLimit(cutOffLimit),
nopLowerLimit(nopLowerLimit),
nopUpperLimit(nopUpperLimit) {}
float opLowerLimit;
float opUpperLimit;
float cutOffLimit;
float nopLowerLimit;
float nopUpperLimit;
};
/**
* Abstraction for the state of a single thermal component
*/
struct ThermalState {
uint8_t noSensorAvailableCounter;
// Which sensor is used for this component?
uint8_t sensorIndex = 0;
// Is heating on for that thermal module?
bool heating = false;
// Which switch is being used for heating the component
heater::Switch heaterSwitch = heater::Switch::HEATER_NONE;
// Heater start time and end times as UNIX seconds. Please note that these times will be updated
// when a switch command is sent, with no guarantess that the heater actually went on.
uint32_t heaterStartTime = 0;
uint32_t heaterEndTime = 0;
};
/**
* Abstraction for the state of a single heater.
*/
struct HeaterState {
bool switchTransition = false;
heater::SwitchState target = heater::SwitchState::OFF;
uint8_t heaterSwitchControlCycles = 0;
bool trackHeaterMaxBurnTime = false;
Countdown heaterOnMaxBurnTime;
};
using HeaterSwitchStates = std::array<heater::SwitchState, heater::NUMBER_OF_SWITCHES>;
enum ThermalComponents : uint8_t {
NONE = 0,
ACS_BOARD = 1,
MGT = 2,
RW = 3,
STR = 4,
IF_BOARD = 5,
TCS_BOARD = 6,
OBC = 7,
LEGACY_OBCIF_BOARD = 8,
SBAND_TRANSCEIVER = 9,
PCDUP60_BOARD = 10,
PCDUACU = 11,
PCDUPDU = 12,
PLPCDU_BOARD = 13,
PLOCMISSION_BOARD = 14,
PLOCPROCESSING_BOARD = 15,
DAC = 16,
CAMERA = 17,
DRO = 18,
X8 = 19,
HPA = 20,
TX = 21,
MPA = 22,
SCEX_BOARD = 23,
NUM_THERMAL_COMPONENTS
};
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::TCS_CONTROLLER;
static constexpr Event NO_VALID_SENSOR_TEMPERATURE = MAKE_EVENT(0, severity::MEDIUM);
static constexpr Event NO_HEALTHY_HEATER_AVAILABLE = MAKE_EVENT(1, severity::MEDIUM);
static constexpr Event SYRLINKS_OVERHEATING = MAKE_EVENT(2, severity::HIGH);
static constexpr Event OBC_OVERHEATING = MAKE_EVENT(4, severity::HIGH);
static constexpr Event CAMERA_OVERHEATING = MAKE_EVENT(5, severity::HIGH);
static constexpr Event PCDU_SYSTEM_OVERHEATING = MAKE_EVENT(6, severity::HIGH);
static constexpr Event HEATER_NOT_OFF_FOR_OFF_MODE = MAKE_EVENT(7, severity::MEDIUM);
static constexpr Event MGT_OVERHEATING = MAKE_EVENT(8, severity::HIGH);
//! [EXPORT] : [COMMENT] P1: Module index. P2: Heater index
static constexpr Event TCS_SWITCHING_HEATER_ON = MAKE_EVENT(9, severity::INFO);
//! [EXPORT] : [COMMENT] P1: Module index. P2: Heater index
static constexpr Event TCS_SWITCHING_HEATER_OFF = MAKE_EVENT(10, severity::INFO);
//! [EXPORT] : [COMMENT] P1: Heater index. P2: Maximum burn time for heater.
static constexpr Event TCS_HEATER_MAX_BURN_TIME_REACHED = MAKE_EVENT(11, severity::MEDIUM);
enum SetId : uint32_t {
SENSOR_TEMPERATURES = 0,
DEVICE_TEMPERATURES = 1,
SUS_TEMPERATURES = 2,
COMPONENT_TEMPERATURES = 3,
HEATER_SET = 4,
TCS_CTRL_INFO = 5
};
enum PoolIds : lp_id_t {
SENSOR_PLOC_HEATSPREADER,
SENSOR_PLOC_MISSIONBOARD,
SENSOR_4K_CAMERA,
SENSOR_DAC_HEATSPREADER,
SENSOR_STARTRACKER,
SENSOR_RW1,
SENSOR_DRO,
SENSOR_SCEX,
SENSOR_X8,
SENSOR_HPA,
SENSOR_TX_MODUL,
SENSOR_MPA,
SENSOR_ACU,
SENSOR_PLPCDU_HEATSPREADER,
SENSOR_TCS_BOARD,
SENSOR_MAGNETTORQUER,
SENSOR_TMP1075_TCS_0,
SENSOR_TMP1075_TCS_1,
SENSOR_TMP1075_PLPCDU_0,
SENSOR_TMP1075_PLPCDU_1,
SENSOR_TMP1075_IF_BOARD,
SUS_0_N_LOC_XFYFZM_PT_XF,
SUS_6_R_LOC_XFYBZM_PT_XF,
SUS_1_N_LOC_XBYFZM_PT_XB,
SUS_7_R_LOC_XBYBZM_PT_XB,
SUS_2_N_LOC_XFYBZB_PT_YB,
SUS_8_R_LOC_XBYBZB_PT_YB,
SUS_3_N_LOC_XFYBZF_PT_YF,
SUS_9_R_LOC_XBYBZB_PT_YF,
SUS_4_N_LOC_XMYFZF_PT_ZF,
SUS_10_N_LOC_XMYBZF_PT_ZF,
SUS_5_N_LOC_XFYMZB_PT_ZB,
SUS_11_R_LOC_XBYMZB_PT_ZB,
COMPONENT_RW,
TEMP_Q7S,
BATTERY_TEMP_1,
BATTERY_TEMP_2,
BATTERY_TEMP_3,
BATTERY_TEMP_4,
TEMP_RW1,
TEMP_RW2,
TEMP_RW3,
TEMP_RW4,
TEMP_STAR_TRACKER,
TEMP_SYRLINKS_POWER_AMPLIFIER,
TEMP_SYRLINKS_BASEBAND_BOARD,
TEMP_MGT,
TEMP_ACU,
TEMP_PDU1,
TEMP_PDU2,
TEMP_1_P60DOCK,
TEMP_2_P60DOCK,
TEMP_GYRO_0_SIDE_A,
TEMP_GYRO_1_SIDE_A,
TEMP_GYRO_2_SIDE_B,
TEMP_GYRO_3_SIDE_B,
TEMP_MGM_0_SIDE_A,
TEMP_MGM_2_SIDE_B,
TEMP_ADC_PAYLOAD_PCDU,
HEATER_SWITCH_LIST,
HEATER_CURRENT,
HEATER_ON_FOR_COMPONENT_VEC,
SENSOR_USED_FOR_TCS_CTRL,
HEATER_IDX_USED_FOR_TCS_CTRL,
HEATER_START_TIME,
HEATER_END_TIME
};
static const uint8_t ENTRIES_SENSOR_TEMPERATURE_SET = 25;
static const uint8_t ENTRIES_DEVICE_TEMPERATURE_SET = 25;
static const uint8_t ENTRIES_SUS_TEMPERATURE_SET = 12;
/**
* @brief This dataset can be used to store the collected temperatures of all temperature sensors
*/
class SensorTemperatures : public StaticLocalDataSet<ENTRIES_SENSOR_TEMPERATURE_SET> {
public:
explicit SensorTemperatures(HasLocalDataPoolIF* owner)
: StaticLocalDataSet(owner, SENSOR_TEMPERATURES) {}
explicit SensorTemperatures(object_id_t objectId)
: StaticLocalDataSet(sid_t(objectId, SENSOR_TEMPERATURES)) {}
lp_var_t<float> plocHeatspreader =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_PLOC_HEATSPREADER, this);
lp_var_t<float> plocMissionboard =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_PLOC_MISSIONBOARD, this);
lp_var_t<float> payload4kCamera = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_4K_CAMERA, this);
lp_var_t<float> dacHeatspreader =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_DAC_HEATSPREADER, this);
lp_var_t<float> startracker = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_STARTRACKER, this);
lp_var_t<float> rw1 = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_RW1, this);
lp_var_t<float> scex = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_SCEX, this);
lp_var_t<float> eBandTx = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TX_MODUL, this);
// E-Band module
lp_var_t<float> dro = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_DRO, this);
lp_var_t<float> mpa = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_MPA, this);
lp_var_t<float> x8 = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_X8, this);
lp_var_t<float> hpa = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_HPA, this);
lp_var_t<float> acu = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_ACU, this);
lp_var_t<float> plpcduHeatspreader =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_PLPCDU_HEATSPREADER, this);
lp_var_t<float> tcsBoard = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TCS_BOARD, this);
lp_var_t<float> mgt = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_MAGNETTORQUER, this);
lp_var_t<float> tmp1075Tcs0 = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TMP1075_TCS_0, this);
lp_var_t<float> tmp1075Tcs1 = lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TMP1075_TCS_1, this);
lp_var_t<float> tmp1075PlPcdu0 =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TMP1075_PLPCDU_0, this);
lp_var_t<float> tmp1075PlPcdu1 =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TMP1075_PLPCDU_1, this);
lp_var_t<float> tmp1075IfBrd =
lp_var_t<float>(sid.objectId, PoolIds::SENSOR_TMP1075_IF_BOARD, this);
};
/**
* @brief This dataset can be used to store the collected temperatures of all device temperature
* sensors
*/
class DeviceTemperatures : public StaticLocalDataSet<ENTRIES_DEVICE_TEMPERATURE_SET> {
public:
explicit DeviceTemperatures(HasLocalDataPoolIF* owner)
: StaticLocalDataSet(owner, DEVICE_TEMPERATURES) {}
explicit DeviceTemperatures(object_id_t objectId)
: StaticLocalDataSet(sid_t(objectId, DEVICE_TEMPERATURES)) {}
lp_var_t<float> q7s = lp_var_t<float>(sid.objectId, PoolIds::TEMP_Q7S, this);
lp_var_t<int16_t> batteryTemp1 = lp_var_t<int16_t>(sid.objectId, PoolIds::BATTERY_TEMP_1, this);
lp_var_t<int16_t> batteryTemp2 = lp_var_t<int16_t>(sid.objectId, PoolIds::BATTERY_TEMP_2, this);
lp_var_t<int16_t> batteryTemp3 = lp_var_t<int16_t>(sid.objectId, PoolIds::BATTERY_TEMP_3, this);
lp_var_t<int16_t> batteryTemp4 = lp_var_t<int16_t>(sid.objectId, PoolIds::BATTERY_TEMP_4, this);
lp_var_t<int32_t> rw1 = lp_var_t<int32_t>(sid.objectId, PoolIds::TEMP_RW1, this);
lp_var_t<int32_t> rw2 = lp_var_t<int32_t>(sid.objectId, PoolIds::TEMP_RW2, this);
lp_var_t<int32_t> rw3 = lp_var_t<int32_t>(sid.objectId, PoolIds::TEMP_RW3, this);
lp_var_t<int32_t> rw4 = lp_var_t<int32_t>(sid.objectId, PoolIds::TEMP_RW4, this);
lp_var_t<float> startracker = lp_var_t<float>(sid.objectId, PoolIds::TEMP_STAR_TRACKER, this);
lp_var_t<float> syrlinksPowerAmplifier =
lp_var_t<float>(sid.objectId, PoolIds::TEMP_SYRLINKS_POWER_AMPLIFIER, this);
lp_var_t<float> syrlinksBasebandBoard =
lp_var_t<float>(sid.objectId, PoolIds::TEMP_SYRLINKS_BASEBAND_BOARD, this);
lp_var_t<int16_t> mgt = lp_var_t<int16_t>(sid.objectId, PoolIds::TEMP_MGT, this);
lp_vec_t<float, 3> acu = lp_vec_t<float, 3>(sid.objectId, PoolIds::TEMP_ACU, this);
lp_var_t<float> pdu1 = lp_var_t<float>(sid.objectId, PoolIds::TEMP_PDU1, this);
lp_var_t<float> pdu2 = lp_var_t<float>(sid.objectId, PoolIds::TEMP_PDU2, this);
lp_var_t<float> temp1P60dock = lp_var_t<float>(sid.objectId, PoolIds::TEMP_1_P60DOCK, this);
lp_var_t<float> temp2P60dock = lp_var_t<float>(sid.objectId, PoolIds::TEMP_2_P60DOCK, this);
lp_var_t<float> gyro0SideA = lp_var_t<float>(sid.objectId, PoolIds::TEMP_GYRO_0_SIDE_A, this);
lp_var_t<float> gyro1SideA = lp_var_t<float>(sid.objectId, PoolIds::TEMP_GYRO_1_SIDE_A, this);
lp_var_t<float> gyro2SideB = lp_var_t<float>(sid.objectId, PoolIds::TEMP_GYRO_2_SIDE_B, this);
lp_var_t<float> gyro3SideB = lp_var_t<float>(sid.objectId, PoolIds::TEMP_GYRO_3_SIDE_B, this);
lp_var_t<float> mgm0SideA = lp_var_t<float>(sid.objectId, PoolIds::TEMP_MGM_0_SIDE_A, this);
lp_var_t<float> mgm2SideB = lp_var_t<float>(sid.objectId, PoolIds::TEMP_MGM_2_SIDE_B, this);
lp_var_t<float> adcPayloadPcdu =
lp_var_t<float>(sid.objectId, PoolIds::TEMP_ADC_PAYLOAD_PCDU, this);
};
/**
* @brief This dataset can be used to store the collected temperatures of all SUS temperature
* sensors
*/
class SusTemperatures : public StaticLocalDataSet<ENTRIES_SUS_TEMPERATURE_SET> {
public:
explicit SusTemperatures(HasLocalDataPoolIF* owner)
: StaticLocalDataSet(owner, SUS_TEMPERATURES) {}
explicit SusTemperatures(object_id_t objectId)
: StaticLocalDataSet(sid_t(objectId, SUS_TEMPERATURES)) {}
lp_var_t<float> sus_0_n_loc_xfyfzm_pt_xf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_0_N_LOC_XFYFZM_PT_XF, this);
lp_var_t<float> sus_6_r_loc_xfybzm_pt_xf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_6_R_LOC_XFYBZM_PT_XF, this);
lp_var_t<float> sus_1_n_loc_xbyfzm_pt_xb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_1_N_LOC_XBYFZM_PT_XB, this);
lp_var_t<float> sus_7_r_loc_xbybzm_pt_xb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_7_R_LOC_XBYBZM_PT_XB, this);
lp_var_t<float> sus_2_n_loc_xfybzb_pt_yb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_2_N_LOC_XFYBZB_PT_YB, this);
lp_var_t<float> sus_8_r_loc_xbybzb_pt_yb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_8_R_LOC_XBYBZB_PT_YB, this);
lp_var_t<float> sus_3_n_loc_xfybzf_pt_yf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_3_N_LOC_XFYBZF_PT_YF, this);
lp_var_t<float> sus_9_r_loc_xbybzb_pt_yf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_9_R_LOC_XBYBZB_PT_YF, this);
lp_var_t<float> sus_4_n_loc_xmyfzf_pt_zf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_4_N_LOC_XMYFZF_PT_ZF, this);
lp_var_t<float> sus_10_n_loc_xmybzf_pt_zf =
lp_var_t<float>(sid.objectId, PoolIds::SUS_10_N_LOC_XMYBZF_PT_ZF, this);
lp_var_t<float> sus_5_n_loc_xfymzb_pt_zb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_5_N_LOC_XFYMZB_PT_ZB, this);
lp_var_t<float> sus_11_r_loc_xbymzb_pt_zb =
lp_var_t<float>(sid.objectId, PoolIds::SUS_11_R_LOC_XBYMZB_PT_ZB, this);
};
class HeaterInfo : public StaticLocalDataSet<3> {
public:
HeaterInfo(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, HEATER_SET) {}
HeaterInfo(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, HEATER_SET)) {}
lp_vec_t<uint8_t, heater::NUMBER_OF_SWITCHES> heaterSwitchState =
lp_vec_t<uint8_t, heater::NUMBER_OF_SWITCHES>(sid.objectId, PoolIds::HEATER_SWITCH_LIST,
this);
lp_var_t<int16_t> heaterCurrent = lp_var_t<int16_t>(sid.objectId, PoolIds::HEATER_CURRENT, this);
};
class TcsCtrlInfo : public StaticLocalDataSet<6> {
public:
explicit TcsCtrlInfo(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, TCS_CTRL_INFO) {}
explicit TcsCtrlInfo(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, TCS_CTRL_INFO)) {}
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS> heatingOnVec =
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS>(
sid.objectId, PoolIds::HEATER_ON_FOR_COMPONENT_VEC, this);
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS> sensorIdxUsedForTcsCtrl =
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS>(sid.objectId,
PoolIds::SENSOR_USED_FOR_TCS_CTRL, this);
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS> heaterSwitchIdx =
lp_vec_t<uint8_t, tcsCtrl::NUM_THERMAL_COMPONENTS>(
sid.objectId, PoolIds::HEATER_IDX_USED_FOR_TCS_CTRL, this);
lp_vec_t<uint32_t, tcsCtrl::NUM_THERMAL_COMPONENTS> heaterStartTimes =
lp_vec_t<uint32_t, tcsCtrl::NUM_THERMAL_COMPONENTS>(sid.objectId, PoolIds::HEATER_START_TIME,
this);
lp_vec_t<uint32_t, tcsCtrl::NUM_THERMAL_COMPONENTS> heaterEndTimes =
lp_vec_t<uint32_t, tcsCtrl::NUM_THERMAL_COMPONENTS>(sid.objectId, PoolIds::HEATER_END_TIME,
this);
};
} // namespace tcsCtrl
#endif /* MISSION_CONTROLLER_CONTROLLERDEFINITIONS_THERMALCONTROLLERDEFINITIONS_H_ */