Robin Mueller
17a336ba0a
Some checks failed
EIVE/eive-obsw/pipeline/head There was a failure building this commit
129 lines
5.1 KiB
C++
129 lines
5.1 KiB
C++
#ifndef MISSION_CONTROLLER_THERMALCONTROLLER_H_
|
|
#define MISSION_CONTROLLER_THERMALCONTROLLER_H_
|
|
|
|
#include <fsfw/controller/ExtendedControllerBase.h>
|
|
#include <fsfw/timemanager/Countdown.h>
|
|
#include <mission/controller/controllerdefinitions/ThermalControllerDefinitions.h>
|
|
#include <mission/devices/devicedefinitions/Max31865Definitions.h>
|
|
#include <mission/devices/devicedefinitions/SusDefinitions.h>
|
|
#include <mission/devices/devicedefinitions/Tmp1075Definitions.h>
|
|
|
|
/**
|
|
* NOP Limit: Hard limit for device, usually from datasheet. Device damage is possible lif NOP limit
|
|
* is exceeded.
|
|
* OP Limit: Soft limit. Device should be switched off or TCS controller should take action if the limit
|
|
* is exceeded to avoid reaching NOP limit
|
|
*/
|
|
struct TempLimits {
|
|
TempLimits(float nopLowerLimit, float opLowerLimit, float opUpperLimit, float nopUpperLimit) : opLowerLimit(opLowerLimit), opUpperLimit(opUpperLimit), nopLowerLimit(nopLowerLimit), nopUpperLimit(nopUpperLimit) {}
|
|
float opLowerLimit;
|
|
float opUpperLimit;
|
|
float nopLowerLimit;
|
|
float nopUpperLimit;
|
|
//TODO define limits
|
|
|
|
};
|
|
|
|
class ThermalController : public ExtendedControllerBase {
|
|
public:
|
|
static const uint16_t INVALID_TEMPERATURE = 999;
|
|
|
|
ThermalController(object_id_t objectId, HeaterHandler& heater);
|
|
|
|
ReturnValue_t initialize() override;
|
|
|
|
protected:
|
|
virtual ReturnValue_t handleCommandMessage(CommandMessage* message) override;
|
|
virtual void performControlOperation() override;
|
|
virtual ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
|
|
LocalDataPoolManager& poolManager) override;
|
|
virtual LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
|
|
|
|
// Mode abstract functions
|
|
virtual ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode,
|
|
uint32_t* msToReachTheMode) override;
|
|
|
|
private:
|
|
static const uint32_t DELAY = 500;
|
|
|
|
enum class InternalState { STARTUP, INITIAL_DELAY, READY };
|
|
|
|
InternalState internalState = InternalState::STARTUP;
|
|
|
|
thermalControllerDefinitions::SensorTemperatures sensorTemperatures;
|
|
thermalControllerDefinitions::SusTemperatures susTemperatures;
|
|
thermalControllerDefinitions::DeviceTemperatures deviceTemperatures;
|
|
|
|
// Temperature Sensors
|
|
MAX31865::Max31865Set max31865Set0;
|
|
MAX31865::Max31865Set max31865Set1;
|
|
MAX31865::Max31865Set max31865Set2;
|
|
MAX31865::Max31865Set max31865Set3;
|
|
MAX31865::Max31865Set max31865Set4;
|
|
MAX31865::Max31865Set max31865Set5;
|
|
MAX31865::Max31865Set max31865Set6;
|
|
MAX31865::Max31865Set max31865Set7;
|
|
MAX31865::Max31865Set max31865Set8;
|
|
MAX31865::Max31865Set max31865Set9;
|
|
MAX31865::Max31865Set max31865Set10;
|
|
MAX31865::Max31865Set max31865Set11;
|
|
MAX31865::Max31865Set max31865Set12;
|
|
MAX31865::Max31865Set max31865Set13;
|
|
MAX31865::Max31865Set max31865Set14;
|
|
MAX31865::Max31865Set max31865Set15;
|
|
TMP1075::Tmp1075Dataset tmp1075SetTcs0;
|
|
TMP1075::Tmp1075Dataset tmp1075SetTcs1;
|
|
TMP1075::Tmp1075Dataset tmp1075SetPlPcdu0;
|
|
TMP1075::Tmp1075Dataset tmp1075SetPlPcdu1;
|
|
TMP1075::Tmp1075Dataset tmp1075SetIfBoard;
|
|
|
|
// SUS
|
|
SUS::SusDataset susSet0;
|
|
SUS::SusDataset susSet1;
|
|
SUS::SusDataset susSet2;
|
|
SUS::SusDataset susSet3;
|
|
SUS::SusDataset susSet4;
|
|
SUS::SusDataset susSet5;
|
|
SUS::SusDataset susSet6;
|
|
SUS::SusDataset susSet7;
|
|
SUS::SusDataset susSet8;
|
|
SUS::SusDataset susSet9;
|
|
SUS::SusDataset susSet10;
|
|
SUS::SusDataset susSet11;
|
|
|
|
//TempLimits
|
|
//TempLimits plocHeatspreaderLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
//TempLimits plocMissionBoardLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
TempLimits cameraLimits = TempLimits(-40.0, -30.0, 65.0, 85.0);
|
|
TempLimits dacHeatspreaderLimits = TempLimits(-65.0, -40.0, 118.0, 150.0);
|
|
TempLimits strLimits = TempLimits(-30.0, -20.0, 70.0, 80.0);
|
|
TempLimits rw1Limits = TempLimits(-40.0, -40.0, 85.0, 85.0);
|
|
//TempLimits droLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
TempLimits scexLimits = TempLimits(-60.0, -40.0, 85.0, 150.0);
|
|
//TempLimits x8Limits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
//TempLimits hpaLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
//TempLimits txModuleLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
//TempLimits mpaLimits = TempLimits(-20.0, 70.0, -30.0, 80.0);
|
|
TempLimits acuLimits = TempLimits(-55.0, -35.0, 85.0, 150.0); //TODO nopLimits
|
|
TempLimits plpcduHeatspreaderLimits = TempLimits(-65.0, -40.0, 85.0, 125.0); //TODO check
|
|
TempLimits tcsBoardLimits = TempLimits(-60.0, -40.0, 85.0, 130.0);
|
|
TempLimits magnettorquerLimits = TempLimits(-40.0, -30.0, 70.0, 80.0); //TODO nopLimits
|
|
|
|
|
|
// Initial delay to make sure all pool variables have been initialized their owners
|
|
Countdown initialCountdown = Countdown(DELAY);
|
|
|
|
PoolEntry<float> tmp1075Tcs0 = PoolEntry<float>(10.0);
|
|
PoolEntry<float> tmp1075Tcs1 = PoolEntry<float>(10.0);
|
|
PoolEntry<float> tmp1075PlPcdu0 = PoolEntry<float>(10.0);
|
|
PoolEntry<float> tmp1075PlPcdu1 = PoolEntry<float>(10.0);
|
|
PoolEntry<float> tmp1075IfBrd = PoolEntry<float>(10.0);
|
|
|
|
static constexpr dur_millis_t MUTEX_TIMEOUT = 50;
|
|
void copySensors();
|
|
void copySus();
|
|
void copyDevices();
|
|
};
|
|
|
|
#endif /* MISSION_CONTROLLER_THERMALCONTROLLER_H_ */
|