eive-obsw/mission/devices/MGMHandlerLIS3MDL.cpp
Robin Mueller 43fe7e0aa0
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
using enum for sensitivity now
2021-09-14 13:55:56 +02:00

499 lines
16 KiB
C++

#include "MGMHandlerLIS3MDL.h"
#include "fsfw/datapool/PoolReadGuard.h"
#if OBSW_VERBOSE_LEVEL >= 1
#include "fsfw/globalfunctions/PeriodicOperationDivider.h"
#endif
MGMHandlerLIS3MDL::MGMHandlerLIS3MDL(object_id_t objectId,
object_id_t deviceCommunication, CookieIF* comCookie):
DeviceHandlerBase(objectId, deviceCommunication, comCookie),
dataset(this) {
#if OBSW_VERBOSE_LEVEL >= 1
debugDivider = new PeriodicOperationDivider(5);
#endif
/* Set to default values right away. */
registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
registers[1] = MGMLIS3MDL::CTRL_REG2_DEFAULT;
registers[2] = MGMLIS3MDL::CTRL_REG3_DEFAULT;
registers[3] = MGMLIS3MDL::CTRL_REG4_DEFAULT;
registers[4] = MGMLIS3MDL::CTRL_REG5_DEFAULT;
}
MGMHandlerLIS3MDL::~MGMHandlerLIS3MDL() {
}
void MGMHandlerLIS3MDL::doStartUp() {
switch (internalState) {
case(InternalState::STATE_NONE): {
internalState = InternalState::STATE_FIRST_CONTACT;
break;
}
case(InternalState::STATE_FIRST_CONTACT): {
/* Will be set by checking device ID (WHO AM I register) */
if(commandExecuted) {
commandExecuted = false;
internalState = InternalState::STATE_SETUP;
}
break;
}
case(InternalState::STATE_SETUP): {
internalState = InternalState::STATE_CHECK_REGISTERS;
break;
}
case(InternalState::STATE_CHECK_REGISTERS): {
/* Set up cached registers which will be used to configure the MGM. */
if(commandExecuted) {
commandExecuted = false;
#if OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP == 1
setMode(MODE_NORMAL);
#else
setMode(_MODE_TO_ON);
#endif
}
break;
}
default:
break;
}
}
void MGMHandlerLIS3MDL::doShutDown() {
setMode(_MODE_POWER_DOWN);
}
ReturnValue_t MGMHandlerLIS3MDL::buildTransitionDeviceCommand(
DeviceCommandId_t *id) {
switch (internalState) {
case(InternalState::STATE_NONE):
case(InternalState::STATE_NORMAL): {
return HasReturnvaluesIF::RETURN_OK;
}
case(InternalState::STATE_FIRST_CONTACT): {
*id = MGMLIS3MDL::IDENTIFY_DEVICE;
break;
}
case(InternalState::STATE_SETUP): {
*id = MGMLIS3MDL::SETUP_MGM;
break;
}
case(InternalState::STATE_CHECK_REGISTERS): {
*id = MGMLIS3MDL::READ_CONFIG_AND_DATA;
break;
}
default: {
/* might be a configuration error. */
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "GyroHandler::buildTransitionDeviceCommand: Unknown internal state!" <<
std::endl;
#else
sif::printWarning("GyroHandler::buildTransitionDeviceCommand: Unknown internal state!\n");
#endif /* FSFW_CPP_OSTREAM_ENABLED == 1 */
return HasReturnvaluesIF::RETURN_OK;
}
}
return buildCommandFromCommand(*id, NULL, 0);
}
uint8_t MGMHandlerLIS3MDL::readCommand(uint8_t command, bool continuousCom) {
command |= (1 << MGMLIS3MDL::RW_BIT);
if (continuousCom == true) {
command |= (1 << MGMLIS3MDL::MS_BIT);
}
return command;
}
uint8_t MGMHandlerLIS3MDL::writeCommand(uint8_t command, bool continuousCom) {
command &= ~(1 << MGMLIS3MDL::RW_BIT);
if (continuousCom == true) {
command |= (1 << MGMLIS3MDL::MS_BIT);
}
return command;
}
void MGMHandlerLIS3MDL::setupMgm() {
registers[0] = MGMLIS3MDL::CTRL_REG1_DEFAULT;
registers[1] = MGMLIS3MDL::CTRL_REG2_DEFAULT;
registers[2] = MGMLIS3MDL::CTRL_REG3_DEFAULT;
registers[3] = MGMLIS3MDL::CTRL_REG4_DEFAULT;
registers[4] = MGMLIS3MDL::CTRL_REG5_DEFAULT;
prepareCtrlRegisterWrite();
}
ReturnValue_t MGMHandlerLIS3MDL::buildNormalDeviceCommand(
DeviceCommandId_t *id) {
// Data/config register will be read in an alternating manner.
if(communicationStep == CommunicationStep::DATA) {
*id = MGMLIS3MDL::READ_CONFIG_AND_DATA;
communicationStep = CommunicationStep::TEMPERATURE;
return buildCommandFromCommand(*id, NULL, 0);
}
else {
*id = MGMLIS3MDL::READ_TEMPERATURE;
communicationStep = CommunicationStep::DATA;
return buildCommandFromCommand(*id, NULL, 0);
}
}
ReturnValue_t MGMHandlerLIS3MDL::buildCommandFromCommand(
DeviceCommandId_t deviceCommand, const uint8_t *commandData,
size_t commandDataLen) {
switch(deviceCommand) {
case(MGMLIS3MDL::READ_CONFIG_AND_DATA): {
std::memset(commandBuffer, 0, sizeof(commandBuffer));
commandBuffer[0] = readCommand(MGMLIS3MDL::CTRL_REG1, true);
rawPacket = commandBuffer;
rawPacketLen = MGMLIS3MDL::NR_OF_DATA_AND_CFG_REGISTERS + 1;
return RETURN_OK;
}
case(MGMLIS3MDL::READ_TEMPERATURE): {
std::memset(commandBuffer, 0, 3);
commandBuffer[0] = readCommand(MGMLIS3MDL::TEMP_LOWBYTE, true);
rawPacket = commandBuffer;
rawPacketLen = 3;
return RETURN_OK;
}
case(MGMLIS3MDL::IDENTIFY_DEVICE): {
return identifyDevice();
}
case(MGMLIS3MDL::TEMP_SENSOR_ENABLE): {
return enableTemperatureSensor(commandData, commandDataLen);
}
case(MGMLIS3MDL::SETUP_MGM): {
setupMgm();
return HasReturnvaluesIF::RETURN_OK;
}
case(MGMLIS3MDL::ACCURACY_OP_MODE_SET): {
return setOperatingMode(commandData, commandDataLen);
}
default:
return DeviceHandlerIF::COMMAND_NOT_IMPLEMENTED;
}
return HasReturnvaluesIF::RETURN_FAILED;
}
ReturnValue_t MGMHandlerLIS3MDL::identifyDevice() {
uint32_t size = 2;
commandBuffer[0] = readCommand(MGMLIS3MDL::IDENTIFY_DEVICE_REG_ADDR);
commandBuffer[1] = 0x00;
rawPacket = commandBuffer;
rawPacketLen = size;
return RETURN_OK;
}
ReturnValue_t MGMHandlerLIS3MDL::scanForReply(const uint8_t *start,
size_t len, DeviceCommandId_t *foundId, size_t *foundLen) {
*foundLen = len;
if (len == MGMLIS3MDL::NR_OF_DATA_AND_CFG_REGISTERS + 1) {
*foundLen = len;
*foundId = MGMLIS3MDL::READ_CONFIG_AND_DATA;
// Check validity by checking config registers
if (start[1] != registers[0] or start[2] != registers[1] or
start[3] != registers[2] or start[4] != registers[3] or
start[5] != registers[4]) {
#if OBSW_VERBOSE_LEVEL >= 1
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "MGMHandlerLIS3MDL::scanForReply: Invalid registers!" << std::endl;
#else
sif::printWarning("MGMHandlerLIS3MDL::scanForReply: Invalid registers!\n");
#endif
#endif
return DeviceHandlerIF::INVALID_DATA;
}
if(mode == _MODE_START_UP) {
commandExecuted = true;
}
}
else if(len == MGMLIS3MDL::TEMPERATURE_REPLY_LEN) {
*foundLen = len;
*foundId = MGMLIS3MDL::READ_TEMPERATURE;
}
else if (len == MGMLIS3MDL::SETUP_REPLY_LEN) {
*foundLen = len;
*foundId = MGMLIS3MDL::SETUP_MGM;
}
else if (len == SINGLE_COMMAND_ANSWER_LEN) {
*foundLen = len;
*foundId = getPendingCommand();
if(*foundId == MGMLIS3MDL::IDENTIFY_DEVICE) {
if(start[1] != MGMLIS3MDL::DEVICE_ID) {
#if OBSW_VERBOSE_LEVEL >= 1
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "MGMHandlerLIS3MDL::scanForReply: Invalid registers!" << std::endl;
#else
sif::printWarning("MGMHandlerLIS3MDL::scanForReply: Invalid registers!\n");
#endif
#endif
return DeviceHandlerIF::INVALID_DATA;
}
if(mode == _MODE_START_UP) {
commandExecuted = true;
}
}
}
else {
return DeviceHandlerIF::INVALID_DATA;
}
/* Data with SPI Interface always has this answer */
if (start[0] == 0b11111111) {
return RETURN_OK;
}
else {
return DeviceHandlerIF::INVALID_DATA;
}
}
ReturnValue_t MGMHandlerLIS3MDL::interpretDeviceReply(DeviceCommandId_t id,
const uint8_t *packet) {
switch (id) {
case MGMLIS3MDL::IDENTIFY_DEVICE: {
break;
}
case MGMLIS3MDL::SETUP_MGM: {
break;
}
case MGMLIS3MDL::READ_CONFIG_AND_DATA: {
// TODO: Store configuration in new local datasets.
float sensitivityFactor = getSensitivityFactor(getSensitivity(registers[2]));
int16_t mgmMeasurementRawX = packet[MGMLIS3MDL::X_HIGHBYTE_IDX] << 8
| packet[MGMLIS3MDL::X_LOWBYTE_IDX] ;
int16_t mgmMeasurementRawY = packet[MGMLIS3MDL::Y_HIGHBYTE_IDX] << 8
| packet[MGMLIS3MDL::Y_LOWBYTE_IDX] ;
int16_t mgmMeasurementRawZ = packet[MGMLIS3MDL::Z_HIGHBYTE_IDX] << 8
| packet[MGMLIS3MDL::Z_LOWBYTE_IDX] ;
/* Target value in microtesla */
float mgmX = static_cast<float>(mgmMeasurementRawX) * sensitivityFactor
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
float mgmY = static_cast<float>(mgmMeasurementRawY) * sensitivityFactor
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
float mgmZ = static_cast<float>(mgmMeasurementRawZ) * sensitivityFactor
* MGMLIS3MDL::GAUSS_TO_MICROTESLA_FACTOR;
#if OBSW_VERBOSE_LEVEL >= 1
if(debugDivider->checkAndIncrement()) {
/* Set terminal to utf-8 if there is an issue with micro printout. */
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::info << "MGMHandlerLIS3: Magnetic field strength in"
" microtesla:" << std::endl;
sif::info << "X: " << mgmX << " \xC2\xB5T" << std::endl;
sif::info << "Y: " << mgmY << " \xC2\xB5T" << std::endl;
sif::info << "Z: " << mgmZ << " \xC2\xB5T" << std::endl;
#else
sif::printInfo("MGMHandlerLIS3: Magnetic field strength in microtesla:\n");
sif::printInfo("X: %f " "\xC2\xB5" "T\n", mgmX);
sif::printInfo("Y: %f " "\xC2\xB5" "T\n", mgmY);
sif::printInfo("Z: %f " "\xC2\xB5" "T\n", mgmZ);
#endif /* FSFW_CPP_OSTREAM_ENABLED == 0 */
}
#endif /* OBSW_VERBOSE_LEVEL >= 1 */
PoolReadGuard readHelper(&dataset);
if(readHelper.getReadResult() == HasReturnvaluesIF::RETURN_OK) {
dataset.fieldStrengthX = mgmX;
dataset.fieldStrengthY = mgmY;
dataset.fieldStrengthZ = mgmZ;
dataset.setValidity(true, true);
}
break;
}
case MGMLIS3MDL::READ_TEMPERATURE: {
int16_t tempValueRaw = packet[2] << 8 | packet[1];
float tempValue = 25.0 + ((static_cast<float>(tempValueRaw)) / 8.0);
#if OBSW_VERBOSE_LEVEL >= 1
if(debugDivider->check()) {
/* Set terminal to utf-8 if there is an issue with micro printout. */
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::info << "MGMHandlerLIS3: Temperature: " << tempValue << " \xC2\xB0" << "C" <<
std::endl;
#else
sif::printInfo("MGMHandlerLIS3: Temperature: %f" "\xC2\xB0" "C\n");
#endif
}
#endif
ReturnValue_t result = dataset.read();
if(result == HasReturnvaluesIF::RETURN_OK) {
dataset.temperature = tempValue;
dataset.commit();
}
break;
}
default: {
return DeviceHandlerIF::UNKNOWN_DEVICE_REPLY;
}
}
return RETURN_OK;
}
MGMLIS3MDL::Sensitivies MGMHandlerLIS3MDL::getSensitivity(uint8_t ctrlRegister2) {
bool fs0Set = ctrlRegister2 & (1 << MGMLIS3MDL::FSO); // Checks if FS0 bit is set
bool fs1Set = ctrlRegister2 & (1 << MGMLIS3MDL::FS1); // Checks if FS1 bit is set
if (fs0Set && fs1Set)
return MGMLIS3MDL::Sensitivies::GAUSS_16;
else if (!fs0Set && fs1Set)
return MGMLIS3MDL::Sensitivies::GAUSS_12;
else if (fs0Set && !fs1Set)
return MGMLIS3MDL::Sensitivies::GAUSS_8;
else
return MGMLIS3MDL::Sensitivies::GAUSS_4;
}
float MGMHandlerLIS3MDL::getSensitivityFactor(MGMLIS3MDL::Sensitivies sens) {
switch(sens) {
case(MGMLIS3MDL::GAUSS_4): {
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_4_SENS;
}
case(MGMLIS3MDL::GAUSS_8): {
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_8_SENS;
}
case(MGMLIS3MDL::GAUSS_12): {
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_12_SENS;
}
case(MGMLIS3MDL::GAUSS_16): {
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_16_SENS;
}
default: {
// Should never happen
return MGMLIS3MDL::FIELD_LSB_PER_GAUSS_4_SENS;
}
}
}
ReturnValue_t MGMHandlerLIS3MDL::enableTemperatureSensor(
const uint8_t *commandData, size_t commandDataLen) {
triggerEvent(CHANGE_OF_SETUP_PARAMETER);
uint32_t size = 2;
commandBuffer[0] = writeCommand(MGMLIS3MDL::CTRL_REG1);
if (commandDataLen > 1) {
return INVALID_NUMBER_OR_LENGTH_OF_PARAMETERS;
}
switch (*commandData) {
case (MGMLIS3MDL::ON): {
commandBuffer[1] = registers[0] | (1 << 7);
break;
}
case (MGMLIS3MDL::OFF): {
commandBuffer[1] = registers[0] & ~(1 << 7);
break;
}
default:
return INVALID_COMMAND_PARAMETER;
}
registers[0] = commandBuffer[1];
rawPacket = commandBuffer;
rawPacketLen = size;
return RETURN_OK;
}
ReturnValue_t MGMHandlerLIS3MDL::setOperatingMode(const uint8_t *commandData,
size_t commandDataLen) {
triggerEvent(CHANGE_OF_SETUP_PARAMETER);
if (commandDataLen != 1) {
return INVALID_NUMBER_OR_LENGTH_OF_PARAMETERS;
}
switch (commandData[0]) {
case MGMLIS3MDL::LOW:
registers[0] = (registers[0] & (~(1 << MGMLIS3MDL::OM1))) & (~(1 << MGMLIS3MDL::OM0));
registers[3] = (registers[3] & (~(1 << MGMLIS3MDL::OMZ1))) & (~(1 << MGMLIS3MDL::OMZ0));
break;
case MGMLIS3MDL::MEDIUM:
registers[0] = (registers[0] & (~(1 << MGMLIS3MDL::OM1))) | (1 << MGMLIS3MDL::OM0);
registers[3] = (registers[3] & (~(1 << MGMLIS3MDL::OMZ1))) | (1 << MGMLIS3MDL::OMZ0);
break;
case MGMLIS3MDL::HIGH:
registers[0] = (registers[0] | (1 << MGMLIS3MDL::OM1)) & (~(1 << MGMLIS3MDL::OM0));
registers[3] = (registers[3] | (1 << MGMLIS3MDL::OMZ1)) & (~(1 << MGMLIS3MDL::OMZ0));
break;
case MGMLIS3MDL::ULTRA:
registers[0] = (registers[0] | (1 << MGMLIS3MDL::OM1)) | (1 << MGMLIS3MDL::OM0);
registers[3] = (registers[3] | (1 << MGMLIS3MDL::OMZ1)) | (1 << MGMLIS3MDL::OMZ0);
break;
default:
break;
}
return prepareCtrlRegisterWrite();
}
void MGMHandlerLIS3MDL::fillCommandAndReplyMap() {
/*
* Regarding ArduinoBoard:
* Actually SPI answers directly, but as commanding ArduinoBoard the
* communication could be delayed
* SPI always has to be triggered, so there could be no periodic answer of
* the device, the device has to asked with a command, so periodic is zero.
*
* We dont read single registers, we just expect special
* reply from he Readall_MGM
*/
insertInCommandAndReplyMap(MGMLIS3MDL::READ_CONFIG_AND_DATA, 1, &dataset);
insertInCommandAndReplyMap(MGMLIS3MDL::READ_TEMPERATURE, 1);
insertInCommandAndReplyMap(MGMLIS3MDL::SETUP_MGM, 1);
insertInCommandAndReplyMap(MGMLIS3MDL::IDENTIFY_DEVICE, 1);
insertInCommandAndReplyMap(MGMLIS3MDL::TEMP_SENSOR_ENABLE, 1);
insertInCommandAndReplyMap(MGMLIS3MDL::ACCURACY_OP_MODE_SET, 1);
}
ReturnValue_t MGMHandlerLIS3MDL::prepareCtrlRegisterWrite() {
commandBuffer[0] = writeCommand(MGMLIS3MDL::CTRL_REG1, true);
for (size_t i = 0; i < MGMLIS3MDL::NR_OF_CTRL_REGISTERS; i++) {
commandBuffer[i + 1] = registers[i];
}
rawPacket = commandBuffer;
rawPacketLen = MGMLIS3MDL::NR_OF_CTRL_REGISTERS + 1;
/* We dont have to check if this is working because we just did it */
return RETURN_OK;
}
void MGMHandlerLIS3MDL::doTransition(Mode_t modeFrom, Submode_t subModeFrom) {
}
uint32_t MGMHandlerLIS3MDL::getTransitionDelayMs(Mode_t from, Mode_t to) {
return 20000;
}
void MGMHandlerLIS3MDL::modeChanged(void) {
internalState = InternalState::STATE_NONE;
}
ReturnValue_t MGMHandlerLIS3MDL::initializeLocalDataPool(
localpool::DataPool &localDataPoolMap, LocalDataPoolManager &poolManager) {
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_X,
new PoolEntry<float>({0.0}));
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_Y,
new PoolEntry<float>({0.0}));
localDataPoolMap.emplace(MGMLIS3MDL::FIELD_STRENGTH_Z,
new PoolEntry<float>({0.0}));
localDataPoolMap.emplace(MGMLIS3MDL::TEMPERATURE_CELCIUS,
new PoolEntry<float>({0.0}));
return HasReturnvaluesIF::RETURN_OK;
}