116 lines
4.4 KiB
C++
116 lines
4.4 KiB
C++
#ifndef MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERLIS3DEFINITIONS_H_
|
|
#define MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERLIS3DEFINITIONS_H_
|
|
|
|
#include <cstdint>
|
|
|
|
namespace MGMLIS3MDL {
|
|
|
|
enum set {
|
|
ON, OFF
|
|
};
|
|
enum opMode {
|
|
LOW, MEDIUM, HIGH, ULTRA
|
|
};
|
|
|
|
static const DeviceCommandId_t SETUP_MGM = 0x00;
|
|
static const DeviceCommandId_t READALL_MGM = 0x01;
|
|
static const DeviceCommandId_t IDENTIFY_DEVICE = 0x02;
|
|
static const DeviceCommandId_t TEMP_SENSOR_ENABLE = 0x03;
|
|
static const DeviceCommandId_t ACCURACY_OP_MODE_SET = 0x04;
|
|
|
|
//Number of all control registers
|
|
static const uint8_t NR_OF_CTRL_REGISTERS = 5;
|
|
//Number of registers in the MGM
|
|
static const uint8_t NR_OF_REGISTERS = 19;
|
|
//Total number of adresses for all registers
|
|
static const uint8_t TOTAL_NR_OF_ADRESSES = 52;
|
|
static const uint8_t SETUP_REPLY = 6;
|
|
|
|
/*------------------------------------------------------------------------*/
|
|
/* Register adresses */
|
|
/*------------------------------------------------------------------------*/
|
|
// Register adress returns identifier of device with default 0b00111101
|
|
static const uint8_t IDENTIFY_DEVICE_REG_ADDR = 0b00001111;
|
|
static const uint8_t DEVICE_ID = 0b00111101; // Identifier for Device
|
|
|
|
//Register adress to access register 1
|
|
static const uint8_t CTRL_REG1 = 0b00100000;
|
|
//Register adress to access register 2
|
|
static const uint8_t CTRL_REG2 = 0b00100001;
|
|
//Register adress to access register 3
|
|
static const uint8_t CTRL_REG3 = 0b00100010;
|
|
//Register adress to access register 4
|
|
static const uint8_t CTRL_REG4 = 0b00100011;
|
|
//Register adress to access register 5
|
|
static const uint8_t CTRL_REG5 = 0b00100100;
|
|
|
|
//Register adress to access status register
|
|
static const uint8_t STATUS_REG = 0b00100111;
|
|
|
|
//Register adress to access low byte of x-axis
|
|
static const uint8_t X_LOWBYTE = 0b00101000;
|
|
//Register adress to access high byte of x-axis
|
|
static const uint8_t X_HIGHBYTE = 0b00101001;
|
|
//Register adress to access low byte of y-axis
|
|
static const uint8_t Y_LOWBYTE = 0b00101010;
|
|
//Register adress to access high byte of y-axis
|
|
static const uint8_t Y_HIGHBYTE = 0b00101011;
|
|
//Register adress to access low byte of z-axis
|
|
static const uint8_t Z_LOWBYTE = 0b00101100;
|
|
//Register adress to access high byte of z-axis
|
|
static const uint8_t Z_HIGHBYTE = 0b00101101;
|
|
|
|
//Register adress to access low byte of temperature sensor
|
|
static const uint8_t TEMP_LOWBYTE = 0b00101110;
|
|
//Register adress to access high byte of temperature sensor
|
|
static const uint8_t TEMP_HIGHBYTE = 0b00101111;
|
|
|
|
/*------------------------------------------------------------------------*/
|
|
/* Initialize Setup Register set bits
|
|
/*------------------------------------------------------------------------*/
|
|
/* General transfer bits */
|
|
// Read=1 / Write=0 Bit
|
|
static const uint8_t RW_BIT = 7;
|
|
// Continous Read/Write Bit, increment adress
|
|
static const uint8_t MS_BIT = 6;
|
|
|
|
/* CTRL_REG1 bits */
|
|
static const uint8_t ST = 0; // Self test enable bit, enabled = 1
|
|
// Enable rates higher than 80 Hz enabled = 1
|
|
static const uint8_t FAST_ODR = 1;
|
|
static const uint8_t DO0 = 2; // Output data rate bit 2
|
|
static const uint8_t DO1 = 3; // Output data rate bit 3
|
|
static const uint8_t DO2 = 4; // Output data rate bit 4
|
|
static const uint8_t OM0 = 5; // XY operating mode bit 5
|
|
static const uint8_t OM1 = 6; // XY operating mode bit 6
|
|
static const uint8_t TEMP_EN = 7; // Temperature sensor enable enabled = 1
|
|
|
|
/* CTRL_REG2 bits */
|
|
//reset configuration registers and user registers
|
|
static const uint8_t SOFT_RST = 2;
|
|
static const uint8_t REBOOT = 3; //reboot memory content
|
|
static const uint8_t FSO = 5; //full-scale selection bit 5
|
|
static const uint8_t FS1 = 6; //full-scale selection bit 6
|
|
|
|
/* CTRL_REG3 bits */
|
|
static const uint8_t MD0 = 0; //Operating mode bit 0
|
|
static const uint8_t MD1 = 1; //Operating mode bit 1
|
|
//SPI serial interface mode selection enabled = 3-wire-mode
|
|
static const uint8_t SIM = 2;
|
|
static const uint8_t LP = 5; //low-power mode
|
|
|
|
/* CTRL_REG4 bits */
|
|
//big/little endian data selection enabled = MSb at lower adress
|
|
static const uint8_t BLE = 1;
|
|
static const uint8_t OMZ0 = 2; //Z operating mode bit 2
|
|
static const uint8_t OMZ1 = 3; //Z operating mode bit 3
|
|
|
|
/* CTRL_REG5 bits */
|
|
static const uint8_t BDU = 6; //Block data update
|
|
static const uint8_t FAST_READ = 7; //Fast read enabled = 1
|
|
}
|
|
|
|
|
|
|
|
#endif /* MISSION_DEVICES_DEVICEDEFINITIONS_MGMHANDLERLIS3DEFINITIONS_H_ */
|