eive-obsw/linux/ipcore/PapbVcInterface.h

138 lines
4.5 KiB
C++

#ifndef LINUX_OBC_PAPBVCINTERFACE_H_
#define LINUX_OBC_PAPBVCINTERFACE_H_
#include <fsfw_hal/common/gpio/gpioDefinitions.h>
#include <fsfw_hal/linux/gpio/LinuxLibgpioIF.h>
#include <linux/ipcore/VirtualChannelIF.h>
#include <atomic>
#include "OBSWConfig.h"
#include "fsfw/returnvalues/returnvalue.h"
/**
* @brief This class handles the transmission of data to a virtual channel of the PTME IP Core
* via the PAPB interface.
*
* @author J. Meier
*/
class PapbVcInterface : public VirtualChannelIF {
public:
/**
* @brief Constructor
*
* @param papbBusyId The ID of the GPIO which is connected to the PAPBBusy_N signal of the
* VcInterface IP Core. A low logic level indicates the VcInterface is not
* ready to receive more data.
* @param papbEmptyId The ID of the GPIO which is connected to the PAPBEmpty signal of the
* VcInterface IP Core. The signal is high when there are no packets in the
* external buffer memory (BRAM).
* @param uioFile UIO file providing access to the PAPB bus
* @param mapNum Map number of UIO map associated with this virtual channel
*/
PapbVcInterface(LinuxLibgpioIF* gpioComIF, gpioId_t papbBusyId, gpioId_t papbEmptyId,
std::string uioFile, int mapNum);
virtual ~PapbVcInterface();
bool isBusy() const override;
/**
*
* @param data
* @param size
* @return returnvalue::OK on successfull write, PAPB_BUSY if PAPB is busy.
*/
ReturnValue_t write(const uint8_t* data, size_t size) override;
void cancelTransfer() override;
ReturnValue_t initialize() override;
private:
static const uint8_t INTERFACE_ID = CLASS_ID::CCSDS_IP_CORE_BRIDGE;
static const ReturnValue_t PAPB_BUSY = MAKE_RETURN_CODE(0xA0);
/**
* Configuration bits:
* bit[1:0]: Size of data (1,2,3 or 4 bytes). 1 Byte <=> b00
* bit[2]: Set this bit to 1 to abort a transferred packet
* bit[3]: Signals to VcInterface the start of a new telemetry packet
*/
static constexpr uint32_t CONFIG_START = 0b00001000;
/**
* Abort a transferred packet.
*/
static constexpr uint32_t CONFIG_ABORT = 0b00000100;
/**
* Writing this word to the VcInterface base address signals to the virtual channel interface
* that a complete tm packet has been transferred.
*/
static constexpr uint32_t CONFIG_END = 0x0;
/**
* Writing to this offset within the memory space of a virtual channel will insert data for
* encoding to the external buffer memory of the PTME IP Core.
* The address offset is 0x400 (= 4 * 256)
*/
static const int DATA_REG_OFFSET = 256;
static constexpr long int FIRST_NON_NULL_DELAY_NS = 10;
static constexpr long int MAX_DELAY_PAPB_POLLING_NS = 40;
LinuxLibgpioIF* gpioComIF = nullptr;
/** Pulled to low when virtual channel not ready to receive data */
gpioId_t papbBusyId = gpio::NO_GPIO;
/** High when external buffer memory of virtual channel is empty */
gpioId_t papbEmptyId = gpio::NO_GPIO;
std::string uioFile;
int mapNum = 0;
mutable struct timespec nextDelay = {.tv_sec = 0, .tv_nsec = 0};
const struct timespec BETWEEN_POLL_DELAY = {.tv_sec = 0, .tv_nsec = 5};
mutable struct timespec remDelay;
volatile uint32_t* vcBaseReg = nullptr;
uint32_t vcOffset = 0;
/**
* @brief This function sends the config byte to the virtual channel of the PTME IP Core
* to initiate a packet transfer.
*/
void startPacketTransfer();
void abortPacketTransfer();
/**
* @brief This function sends the config byte to the virtual channel interface of the PTME
* IP Core to signal the end of a packet transfer.
*/
void completePacketTransfer();
/**
* @brief This function reads the papb busy signal indicating whether the virtual channel
* interface is ready to receive more data or not. PAPB is ready when
* PAPB_Busy_N == '1'.
*
* @return returnvalue::OK when ready to receive data else PAPB_BUSY.
*/
inline ReturnValue_t pollPapbBusySignal(uint32_t maxPollRetries) const;
/**
* @brief This function can be used for debugging to check whether there are packets in
* the packet buffer of the virtual channel or not.
*/
void isVcInterfaceBufferEmpty();
/**
* @brief This function sends a complete telemetry transfer frame data field (1105 bytes)
* to the papb interface of the PTME IP Core. Can be used to test the implementation.
*/
ReturnValue_t sendTestFrame();
};
#endif /* LINUX_OBC_PAPBVCINTERFACE_H_ */