eive-obsw/common/config/commonObjects.h

80 lines
2.1 KiB
C++

#ifndef COMMON_CONFIG_COMMONOBJECTS_H_
#define COMMON_CONFIG_COMMONOBJECTS_H_
#include <cstdint>
namespace objects {
enum commonObjects: uint32_t {
/* First Byte 0x50-0x52 reserved for PUS Services **/
CCSDS_PACKET_DISTRIBUTOR = 0x50000100,
PUS_PACKET_DISTRIBUTOR = 0x50000200,
UDP_BRIDGE = 0x50000300,
UDP_POLLING_TASK = 0x50000400,
/* 0x43 ('C') for Controllers */
THERMAL_CONTROLLER = 0x43400001,
ACS_CONTROLLER = 0x43100002,
CORE_CONTROLLER = 0x43000003,
/* 0x44 ('D') for device handlers */
P60DOCK_HANDLER = 0x44250000,
PDU1_HANDLER = 0x44250001,
PDU2_HANDLER = 0x44250002,
ACU_HANDLER = 0x44250003,
TMP1075_HANDLER_1 = 0x44420004,
TMP1075_HANDLER_2 = 0x44420005,
MGM_0_LIS3_HANDLER = 0x44120006,
MGM_1_RM3100_HANDLER = 0x44120007,
MGM_2_LIS3_HANDLER = 0x44120008,
MGM_3_RM3100_HANDLER = 0x44120009,
GYRO_0_ADIS_HANDLER = 0x44120010,
GYRO_1_L3G_HANDLER = 0x44120011,
GYRO_2_ADIS_HANDLER = 0x44120012,
GYRO_3_L3G_HANDLER = 0x44120013,
IMTQ_HANDLER = 0x44140014,
PLOC_HANDLER = 0x44330015,
/**
* Not yet specified which pt1000 will measure which device/location in the satellite.
* Therefore object ids are named according to the IC naming of the RTDs in the schematic.
*/
RTD_IC3 = 0x44420016,
RTD_IC4 = 0x44420017,
RTD_IC5 = 0x44420018,
RTD_IC6 = 0x44420019,
RTD_IC7 = 0x44420020,
RTD_IC8 = 0x44420021,
RTD_IC9 = 0x44420022,
RTD_IC10 = 0x44420023,
RTD_IC11 = 0x44420024,
RTD_IC12 = 0x44420025,
RTD_IC13 = 0x44420026,
RTD_IC14 = 0x44420027,
RTD_IC15 = 0x44420028,
RTD_IC16 = 0x44420029,
RTD_IC17 = 0x44420030,
RTD_IC18 = 0x44420031,
SUS_1 = 0x44120032,
SUS_2 = 0x44120033,
SUS_3 = 0x44120034,
SUS_4 = 0x44120035,
SUS_5 = 0x44120036,
SUS_6 = 0x44120037,
SUS_7 = 0x44120038,
SUS_8 = 0x44120039,
SUS_9 = 0x44120040,
SUS_10 = 0x44120041,
SUS_11 = 0x44120042,
SUS_12 = 0x44120043,
SUS_13 = 0x44120044,
GPS0_HANDLER = 0x44130045,
GPS1_HANDLER = 0x44130146
};
}
#endif /* COMMON_CONFIG_COMMONOBJECTS_H_ */