eive-obsw/linux/fsfwconfig/OBSWConfig.h.in
Robin Mueller 988a5e6b31
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good
battery handler not created
2022-02-02 17:36:40 +01:00

148 lines
5.7 KiB
C

/**
* @brief This file can be used to add preprocessor define for conditional
* code inclusion exclusion or various other project constants and
* properties in one place.
*/
#ifndef FSFWCONFIG_OBSWCONFIG_H_
#define FSFWCONFIG_OBSWCONFIG_H_
#cmakedefine RASPBERRY_PI
#cmakedefine XIPHOS_Q7S
#cmakedefine BEAGLEBONEBLACK
#ifdef RASPBERRY_PI
#include "rpiConfig.h"
#elif defined(XIPHOS_Q7S)
#include "q7sConfig.h"
#endif
#include "commonConfig.h"
#include "OBSWVersion.h"
/* These defines should be disabled for mission code but are useful for
debugging. */
#define OBSW_VERBOSE_LEVEL 1
//! Board defines
#define BOARD_TE0720 0
/*******************************************************************/
/** All of the following flags should be enabled for mission code */
/*******************************************************************/
//! Timers can mess up the code when debugging
//! All of this should be enabled for mission code!
#if defined XIPHOS_Q7S
#define OBSW_USE_CCSDS_IP_CORE 1
// Set to 1 if all telemetry should be sent to the PTME IP Core
#define OBSW_TM_TO_PTME 1
// Set to 1 if telecommands are received via the PDEC IP Core
#define OBSW_TC_FROM_PDEC 1
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_MGT 1
#define OBSW_ADD_BPX_BATTERY_HANDLER 1
#define OBSW_ADD_STAR_TRACKER 0
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_ACS_BOARD 1
#define OBSW_ADD_ACS_HANDLERS 0
#define OBSW_ADD_RW 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_SYRLINKS 0
#define OBSW_ENABLE_SYRLINKS_TRANSMIT_TIMEOUT 0
#define OBSW_SYRLINKS_SIMULATED 1
#endif
/*******************************************************************/
/** All of the following flags should be disabled for mission code */
/*******************************************************************/
//! /* Can be used to switch device to NORMAL mode immediately */
#define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP 1
#define OBSW_PRINT_MISSED_DEADLINES 1
// If this is enabled, all other SPI code should be disabled
#define OBSW_ADD_TEST_CODE 0
#define OBSW_ADD_SPI_TEST_CODE 0
#define OBSW_ADD_TEST_PST 0
#define OBSW_ADD_TEST_TASK 0
#define OBSW_TEST_LIBGPIOD 0
#define OBSW_TEST_RADIATION_SENSOR_HANDLER 0
#define OBSW_TEST_SUS_HANDLER 0
#define OBSW_TEST_PLOC_HANDLER 0
#define OBSW_TEST_CCSDS_BRIDGE 0
#define OBSW_TEST_CCSDS_PTME 0
#define OBSW_TEST_TE7020_HEATER 0
#define OBSW_TEST_GPIO_OPEN_BY_LABEL 0
#define OBSW_TEST_GPIO_OPEN_BY_LINE_NAME 0
#define OBSW_DEBUG_P60DOCK 0
#define OBSW_DEBUG_BPX_BATT 0
#define OBSW_DEBUG_PDU1 0
#define OBSW_DEBUG_PDU2 0
#define OBSW_DEBUG_GPS 0
#define OBSW_DEBUG_ACU 0
#define OBSW_DEBUG_SYRLINKS 0
#define OBSW_DEBUG_IMTQ 0
#define OBSW_DEBUG_RAD_SENSOR 0
#define OBSW_DEBUG_SUS 0
#define OBSW_DEBUG_RTD 0
#define OBSW_DEBUG_RW 0
#define OBSW_DEBUG_STARTRACKER 0
#define OBSW_DEBUG_PLOC_MPSOC 0
#define OBSW_DEBUG_PLOC_SUPERVISOR 0
#define OBSW_DEBUG_PDEC_HANDLER 0
#ifdef RASPBERRY_PI
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_STAR_TRACKER 0
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_ACS_BOARD 0
#define OBSW_ADD_GPS_0 0
#define OBSW_ADD_GPS_1 0
#define OBSW_ADD_RW 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_SYRLINKS 0
#endif
/*******************************************************************/
/** Hardcoded */
/*******************************************************************/
// Leave at one as the BSP is linux. Used by the ADIS1650X device handler
#define OBSW_ADIS1650X_LINUX_COM_IF 1
#include "OBSWVersion.h"
#ifdef __cplusplus
#include "objects/systemObjectList.h"
#include "events/subsystemIdRanges.h"
#include "returnvalues/classIds.h"
namespace config {
#endif
/* Add mission configuration flags here */
static constexpr uint32_t OBSW_FILESYSTEM_HANDLER_QUEUE_SIZE = 50;
static constexpr uint32_t PLOC_UPDATER_QUEUE_SIZE = 50;
static constexpr uint32_t STR_IMG_HELPER_QUEUE_SIZE = 50;
static constexpr uint8_t LIVE_TM = 0;
#ifdef __cplusplus
}
#endif
#endif /* FSFWCONFIG_OBSWCONFIG_H_ */