eive-obsw/linux/boardtest/UartTestClass.cpp
Robin Mueller 7005314d4b
All checks were successful
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
EIVE/eive-obsw/pipeline/head This commit looks good
apply clang-format
2022-02-09 12:07:29 +01:00

222 lines
8.0 KiB
C++

#include "UartTestClass.h"
#include <fsfw/tasks/TaskFactory.h>
#if defined(RASPBERRY_PI)
#include "rpiConfig.h"
#elif defined(XIPHOS_Q7S)
#include "q7sConfig.h"
#endif
#include <errno.h> // Error integer and strerror() function
#include <fcntl.h> // Contains file controls like O_RDWR
#include <unistd.h> // write(), read(), close()
#include "fsfw/globalfunctions/CRC.h"
#include "fsfw/globalfunctions/DleEncoder.h"
#include "fsfw/globalfunctions/arrayprinter.h"
#include "fsfw/serviceinterface.h"
#include "mission/devices/devicedefinitions/SCEXDefinitions.h"
#define GPS_REPLY_WIRETAPPING 0
UartTestClass::UartTestClass(object_id_t objectId) : TestTask(objectId) { mode = TestModes::SCEX; }
ReturnValue_t UartTestClass::initialize() {
if (mode == TestModes::GPS) {
gpsInit();
} else if (mode == TestModes::SCEX) {
scexInit();
}
return HasReturnvaluesIF::RETURN_OK;
}
ReturnValue_t UartTestClass::performOneShotAction() { return HasReturnvaluesIF::RETURN_OK; }
ReturnValue_t UartTestClass::performPeriodicAction() {
if (mode == TestModes::GPS) {
gpsPeriodic();
} else if (mode == TestModes::SCEX) {
scexPeriodic();
}
return HasReturnvaluesIF::RETURN_OK;
}
void UartTestClass::gpsInit() {
#if RPI_TEST_GPS_DEVICE == 1
int result = lwgps_init(&gpsData);
if (result == 0) {
sif::warning << "lwgps_init error: " << result << std::endl;
}
/* Get file descriptor */
serialPort = open("/dev/serial0", O_RDWR);
if (serialPort < 0) {
sif::warning << "open call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
}
/* Setting up UART parameters */
tty.c_cflag &= ~PARENB; // Clear parity bit
tty.c_cflag &= ~CSTOPB; // Clear stop field, only one stop bit used in communication
tty.c_cflag &= ~CSIZE; // Clear all the size bits
tty.c_cflag |= CS8; // 8 bits per byte
tty.c_cflag &= ~CRTSCTS; // Disable RTS/CTS hardware flow control
tty.c_cflag |= CREAD | CLOCAL; // Turn on READ & ignore ctrl lines (CLOCAL = 1)
// Use canonical mode for GPS device
tty.c_lflag |= ICANON;
tty.c_lflag &= ~ECHO; // Disable echo
tty.c_lflag &= ~ECHOE; // Disable erasure
tty.c_lflag &= ~ECHONL; // Disable new-line echo
tty.c_lflag &= ~ISIG; // Disable interpretation of INTR, QUIT and SUSP
tty.c_iflag &= ~(IXON | IXOFF | IXANY); // Turn off s/w flow ctrl
tty.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR |
ICRNL); // Disable any special handling of received bytes
tty.c_oflag &= ~OPOST; // Prevent special interpretation of output bytes (e.g. newline chars)
tty.c_oflag &= ~ONLCR; // Prevent conversion of newline to carriage return/line feed
// Non-blocking mode
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 0;
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
if (tcsetattr(serialPort, TCSANOW, &tty) != 0) {
sif::warning << "tcsetattr call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
;
}
// Flush received and unread data. Those are old NMEA strings which are not relevant anymore
tcflush(serialPort, TCIFLUSH);
#endif
}
void UartTestClass::gpsPeriodic() {
#if RPI_TEST_GPS_DEVICE == 1
int bytesRead = 0;
do {
bytesRead = read(serialPort, reinterpret_cast<void*>(recBuf.data()),
static_cast<unsigned int>(recBuf.size()));
if (bytesRead < 0) {
sif::warning << "UartTestClass::performPeriodicAction: read call failed with error [" << errno
<< ", " << strerror(errno) << "]" << std::endl;
break;
} else if (bytesRead >= static_cast<int>(recBuf.size())) {
sif::debug << "UartTestClass::performPeriodicAction: "
"recv buffer might not be large enough"
<< std::endl;
} else if (bytesRead > 0) {
// pass data to lwgps for processing
#if GPS_REPLY_WIRETAPPING == 1
sif::info << recBuf.data() << std::endl;
#endif
int result = lwgps_process(&gpsData, recBuf.data(), bytesRead);
if (result == 0) {
sif::warning << "UartTestClass::performPeriodicAction: lwgps_process error" << std::endl;
}
recvCnt++;
if (recvCnt == 6) {
recvCnt = 0;
sif::info << "GPS Data" << std::endl;
// Print messages
printf("Valid status: %d\n", gpsData.is_valid);
printf("Latitude: %f degrees\n", gpsData.latitude);
printf("Longitude: %f degrees\n", gpsData.longitude);
printf("Altitude: %f meters\n", gpsData.altitude);
}
}
} while (bytesRead > 0);
#endif
}
void UartTestClass::scexInit() {
#if defined(RASPBERRY_PI)
std::string devname = "/dev/ttyUSB1";
#else
std::string devname = "/dev/ul-scex";
#endif
/* Get file descriptor */
serialPort = open(devname.c_str(), O_RDWR);
if (serialPort < 0) {
sif::warning << "open call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
return;
}
// Setting up UART parameters
tty.c_cflag &= ~PARENB; // Clear parity bit
tty.c_cflag &= ~CSTOPB; // Clear stop field, only one stop bit used in communication
tty.c_cflag &= ~CSIZE; // Clear all the size bits
tty.c_cflag |= CS8; // 8 bits per byte
tty.c_cflag &= ~CRTSCTS; // Disable RTS/CTS hardware flow control
tty.c_cflag |= CREAD | CLOCAL; // Turn on READ & ignore ctrl lines (CLOCAL = 1)
// Use non-canonical mode and clear echo flag
tty.c_lflag &= ~(ICANON | ECHO);
// Non-blocking mode, read until either line is 0.1 second idle or maximum of 255 bytes are
// received in one go
tty.c_cc[VTIME] = 1; // In units of 0.1 seconds
tty.c_cc[VMIN] = 255; // Read up to 255 bytes
if (tcsetattr(serialPort, TCSANOW, &tty) != 0) {
sif::warning << "tcsetattr call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
}
// Flush received and unread data
tcflush(serialPort, TCIFLUSH);
}
void UartTestClass::scexPeriodic() {
auto dleEncoder = DleEncoder();
std::array<uint8_t, 128> tmpCmdBuf = {};
// Send ping command
tmpCmdBuf[0] = scex::CMD_PING;
// These two fields are the packet counter and the total packet count. Those are 1 and 1 for each
// telecommand so far
tmpCmdBuf[1] = 1;
tmpCmdBuf[2] = 1;
uint16_t userDataLen = 0;
tmpCmdBuf[3] = (userDataLen >> 8) & 0xff;
tmpCmdBuf[4] = userDataLen & 0xff;
uint16_t crc = CRC::crc16ccitt(tmpCmdBuf.data(), 5);
tmpCmdBuf[5] = (crc >> 8) & 0xff;
tmpCmdBuf[6] = crc & 0xff;
size_t encodedLen = 0;
ReturnValue_t result =
dleEncoder.encode(tmpCmdBuf.data(), 7, cmdBuf.data(), cmdBuf.size(), &encodedLen, true);
if (result != HasReturnvaluesIF::RETURN_OK) {
sif::warning << "UartTestClass::scexInit: Encoding failed" << std::endl;
return;
}
arrayprinter::print(cmdBuf.data(), 9);
size_t bytesWritten = write(serialPort, cmdBuf.data(), encodedLen);
if (bytesWritten != encodedLen) {
sif::warning << "Sending ping command to solar experiment failed" << std::endl;
}
TaskFactory::delayTask(20);
bytesWritten = write(serialPort, cmdBuf.data(), encodedLen);
if (bytesWritten != encodedLen) {
sif::warning << "Sending ping command to solar experiment failed" << std::endl;
}
// Read back reply immediately
int bytesRead = 0;
do {
bytesRead = read(serialPort, reinterpret_cast<void*>(recBuf.data()),
static_cast<unsigned int>(recBuf.size()));
if (bytesRead < 0) {
sif::warning << "UartTestClass::performPeriodicAction: read call failed with error [" << errno
<< ", " << strerror(errno) << "]" << std::endl;
break;
} else if (bytesRead >= static_cast<int>(recBuf.size())) {
sif::debug << "UartTestClass::performPeriodicAction: "
"recv buffer might not be large enough"
<< std::endl;
} else if (bytesRead > 0) {
sif::info << "Received " << bytesRead << " from the Solar Cell Experiment:" << std::endl;
arrayprinter::print(recBuf.data(), bytesRead);
}
} while (bytesRead > 0);
}