eive-obsw/linux/fsfwconfig/objects/systemObjectList.h
Jakob Meier 89757c447c
All checks were successful
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
run auto-formatter
2022-06-17 08:31:36 +02:00

69 lines
1.6 KiB
C++

#ifndef LINUX_FSFWCONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#define LINUX_FSFWCONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#include <fsfw/objectmanager/frameworkObjects.h>
#include <cstdint>
#include "commonObjects.h"
// The objects will be instantiated in the ID order
// For naming scheme see flight manual
/*
https://egit.irs.uni-stuttgart.de/redmine/projects/eive-flight-manual/wiki/EIVE_Project_IDs
Second byte first four bits is the subsystem:
OBDH 0x0
ACS 0x1
EPS 0x2
PL 0x3
TCS 0x4
COM 0x5
Second byte last four bits is the bus:
None 0x0
GPIO 0x1
SPI 0x2
UART 0x3
I2C 0x4
CAN 0x5
Third byte is an assembly counter if there are multiple redundant devices.
Fourth byte is a unique counter.
*/
namespace objects {
enum sourceObjects : uint32_t {
/* 0x53 reserved for FSFW */
FW_ADDRESS_START = PUS_SERVICE_1_VERIFICATION,
FW_ADDRESS_END = TIME_STAMPER,
PUS_SERVICE_6 = 0x51000500,
CCSDS_IP_CORE_BRIDGE = 0x73500000,
TM_FUNNEL = 0x73000100,
/* 0x49 ('I') for Communication Interfaces **/
ARDUINO_COM_IF = 0x49000000,
CSP_COM_IF = 0x49050001,
I2C_COM_IF = 0x49040002,
UART_COM_IF = 0x49030003,
SPI_MAIN_COM_IF = 0x49020004,
GPIO_IF = 0x49010005,
SPI_RW_COM_IF = 0x49020005,
SPI_RTD_COM_IF = 0x49020006,
/* 0x54 ('T') for test handlers */
TEST_TASK = 0x54694269,
LIBGPIOD_TEST = 0x54123456,
SPI_TEST = 0x54000010,
UART_TEST = 0x54000020,
I2C_TEST = 0x54000030,
DUMMY_INTERFACE = 0x5400CAFE,
DUMMY_HANDLER = 0x5400AFFE,
P60DOCK_TEST_TASK = 0x00005060,
DUMMY_COM_IF = 0x54000040
};
}
#endif /* LINUX_FSFWCONFIG_OBJECTS_SYSTEMOBJECTLIST_H_ */