eive-obsw/mission/devices/HeaterHandler.h
Jakob Meier 89757c447c
All checks were successful
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
run auto-formatter
2022-06-17 08:31:36 +02:00

177 lines
6.1 KiB
C++

#ifndef MISSION_DEVICES_HEATERHANDLER_H_
#define MISSION_DEVICES_HEATERHANDLER_H_
#include <fsfw/action/HasActionsIF.h>
#include <fsfw/devicehandlers/CookieIF.h>
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
#include <fsfw/devicehandlers/HealthDevice.h>
#include <fsfw/health/HasHealthIF.h>
#include <fsfw/health/HealthHelper.h>
#include <fsfw/objectmanager/SystemObject.h>
#include <fsfw/power/PowerSwitchIF.h>
#include <fsfw/returnvalues/HasReturnvaluesIF.h>
#include <fsfw/tasks/ExecutableObjectIF.h>
#include <fsfw/timemanager/Countdown.h>
#include <fsfw_hal/common/gpio/GpioIF.h>
#include <array>
#include <vector>
#include "devices/heaterSwitcherList.h"
class PowerSwitchIF;
class HealthTableIF;
using HeaterPair = std::pair<HealthDevice*, gpioId_t>;
struct HeaterHelper {
public:
HeaterHelper(std::array<HeaterPair, heater::NUMBER_OF_SWITCHES> heaters) : heaters(heaters) {}
std::array<HeaterPair, heater::NUMBER_OF_SWITCHES> heaters = {};
};
/**
* @brief This class intends the control of heaters.
*
* @author J. Meier
*/
class HeaterHandler : public ExecutableObjectIF,
public PowerSwitchIF,
public SystemObject,
public HasActionsIF {
public:
static const uint8_t INTERFACE_ID = CLASS_ID::HEATER_HANDLER;
static const ReturnValue_t COMMAND_NOT_SUPPORTED = MAKE_RETURN_CODE(0xA1);
static const ReturnValue_t INIT_FAILED = MAKE_RETURN_CODE(0xA2);
static const ReturnValue_t INVALID_SWITCH_NR = MAKE_RETURN_CODE(0xA3);
static const ReturnValue_t MAIN_SWITCH_SET_TIMEOUT = MAKE_RETURN_CODE(0xA4);
static const ReturnValue_t COMMAND_ALREADY_WAITING = MAKE_RETURN_CODE(0xA5);
enum CmdSourceParam : uint8_t { INTERNAL = 0, EXTERNAL = 1 };
/** Device command IDs */
static const DeviceCommandId_t SWITCH_HEATER = 0x0;
HeaterHandler(object_id_t setObjectId, GpioIF* gpioInterface_, HeaterHelper helper,
PowerSwitchIF* mainLineSwitcherObjectId, power::Switch_t mainLineSwitch);
virtual ~HeaterHandler();
ReturnValue_t performOperation(uint8_t operationCode = 0) override;
ReturnValue_t sendSwitchCommand(uint8_t switchNr, ReturnValue_t onOff) override;
ReturnValue_t sendFuseOnCommand(uint8_t fuseNr) override;
/**
* @brief This function will be called from the Heater object to check
* the current switch state.
*/
ReturnValue_t getSwitchState(uint8_t switchNr) const override;
ReturnValue_t getFuseState(uint8_t fuseNr) const override;
uint32_t getSwitchDelayMs(void) const override;
MessageQueueId_t getCommandQueue() const override;
ReturnValue_t executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
const uint8_t* data, size_t size) override;
ReturnValue_t initialize() override;
private:
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::HEATER_HANDLER;
static constexpr Event GPIO_PULL_HIGH_FAILED = MAKE_EVENT(0, severity::LOW);
static constexpr Event GPIO_PULL_LOW_FAILED = MAKE_EVENT(1, severity::LOW);
static constexpr Event HEATER_WENT_ON = event::makeEvent(SUBSYSTEM_ID, 2, severity::INFO);
static constexpr Event HEATER_WENT_OFF = event::makeEvent(SUBSYSTEM_ID, 3, severity::INFO);
static constexpr Event SWITCH_ALREADY_ON = MAKE_EVENT(4, severity::LOW);
static constexpr Event SWITCH_ALREADY_OFF = MAKE_EVENT(5, severity::LOW);
static constexpr Event MAIN_SWITCH_TIMEOUT = MAKE_EVENT(6, severity::MEDIUM);
//! A faulty heater was one. The SW will autonomously attempt to shut it down. P1: Heater Index
static constexpr Event FAULTY_HEATER_WAS_ON = event::makeEvent(SUBSYSTEM_ID, 7, severity::LOW);
static const MessageQueueId_t NO_COMMANDER = 0;
enum SwitchState : bool { ON = true, OFF = false };
enum SwitchAction : uint8_t { SET_SWITCH_OFF, SET_SWITCH_ON, NONE };
/**
* @brief Struct holding information about a heater command to execute.
*
* @param action The action to perform.
* @param replyQueue The queue of the commander to which status replies
* will be sent.
* @param active True if command is waiting for execution, otherwise false.
* @param waitSwitchOn True if the command is waiting for the main switch being set on.
* @param mainSwitchCountdown Sets timeout to wait for main switch being set on.
*/
struct HeaterWrapper {
HeaterWrapper(HeaterPair pair, SwitchState initState)
: healthDevice(pair.first), gpioId(pair.second), switchState(initState) {}
HealthDevice* healthDevice = nullptr;
gpioId_t gpioId = gpio::NO_GPIO;
SwitchAction action = SwitchAction::NONE;
MessageQueueId_t replyQueue = MessageQueueIF::NO_QUEUE;
bool cmdActive = false;
SwitchState switchState = SwitchState::OFF;
bool waitMainSwitchOn = false;
Countdown mainSwitchCountdown;
};
using HeaterMap = std::vector<HeaterWrapper>;
HeaterMap heaterVec = {};
MutexIF* heaterMutex = nullptr;
HeaterHelper helper;
/** Size of command queue */
size_t cmdQueueSize = 20;
GpioIF* gpioInterface = nullptr;
/** Queue to receive messages from other objects. */
MessageQueueIF* commandQueue = nullptr;
/**
* Power switcher object which controls the 8V main line of the heater
* logic on the TCS board.
*/
PowerSwitchIF* mainLineSwitcher = nullptr;
/** Switch number of the heater power supply switch */
power::Switch_t mainLineSwitch;
ActionHelper actionHelper;
StorageManagerIF* ipcStore = nullptr;
void readCommandQueue();
/**
* @brief Returns the state of a switch (ON - true, or OFF - false).
* @param switchNr The number of the switch to check.
*/
SwitchState checkSwitchState(heater::Switchers switchNr) const;
/**
* @brief This function runs commands waiting for execution.
*/
void handleSwitchHandling();
ReturnValue_t initializeHeaterMap();
/**
* @brief Sets all switches to OFF.
*/
void setInitialSwitchStates();
void handleSwitchOnCommand(heater::Switchers heaterIdx);
void handleSwitchOffCommand(heater::Switchers heaterIdx);
/**
* @brief Checks if all switches are off.
* @return True if all switches are off, otherwise false.
*/
bool allSwitchesOff();
};
#endif /* MISSION_DEVICES_HEATERHANDLER_H_ */