524 lines
20 KiB
C++
524 lines
20 KiB
C++
#include "GyroADIS1650XHandler.h"
|
|
|
|
#include <fsfw/action/HasActionsIF.h>
|
|
#include <fsfw/datapool/PoolReadGuard.h>
|
|
|
|
#include "fsfw/FSFW.h"
|
|
|
|
#ifdef FSFW_OSAL_LINUX
|
|
#include <sys/ioctl.h>
|
|
#include <unistd.h>
|
|
|
|
#include "fsfw_hal/linux/UnixFileGuard.h"
|
|
#include "fsfw_hal/linux/spi/SpiComIF.h"
|
|
#include "fsfw_hal/linux/spi/SpiCookie.h"
|
|
#include "fsfw_hal/linux/utility.h"
|
|
#endif
|
|
|
|
GyroADIS1650XHandler::GyroADIS1650XHandler(object_id_t objectId, object_id_t deviceCommunication,
|
|
CookieIF *comCookie, ADIS1650X::Type type)
|
|
: DeviceHandlerBase(objectId, deviceCommunication, comCookie),
|
|
adisType(type),
|
|
primaryDataset(this),
|
|
configDataset(this),
|
|
breakCountdown() {
|
|
#ifdef FSFW_OSAL_LINUX
|
|
SpiCookie *cookie = dynamic_cast<SpiCookie *>(comCookie);
|
|
if (cookie != nullptr) {
|
|
cookie->setCallbackMode(&spiSendCallback, this);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void GyroADIS1650XHandler::doStartUp() {
|
|
// Initial 310 ms start up time after power-up
|
|
if (internalState == InternalState::STARTUP) {
|
|
if (not commandExecuted) {
|
|
warningSwitch = true;
|
|
breakCountdown.setTimeout(ADIS1650X::START_UP_TIME);
|
|
commandExecuted = true;
|
|
}
|
|
if (breakCountdown.hasTimedOut()) {
|
|
internalState = InternalState::CONFIG;
|
|
commandExecuted = false;
|
|
}
|
|
}
|
|
|
|
// Read all configuration registers first
|
|
if (internalState == InternalState::CONFIG) {
|
|
if (commandExecuted) {
|
|
commandExecuted = false;
|
|
internalState = InternalState::IDLE;
|
|
}
|
|
}
|
|
|
|
if (internalState == InternalState::IDLE) {
|
|
if (goToNormalMode) {
|
|
setMode(MODE_NORMAL);
|
|
} else {
|
|
setMode(MODE_ON);
|
|
}
|
|
}
|
|
}
|
|
|
|
void GyroADIS1650XHandler::doShutDown() {
|
|
commandExecuted = false;
|
|
internalState = InternalState::STARTUP;
|
|
setMode(_MODE_POWER_DOWN);
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::buildNormalDeviceCommand(DeviceCommandId_t *id) {
|
|
*id = ADIS1650X::READ_SENSOR_DATA;
|
|
return buildCommandFromCommand(*id, nullptr, 0);
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::buildTransitionDeviceCommand(DeviceCommandId_t *id) {
|
|
switch (internalState) {
|
|
case (InternalState::CONFIG): {
|
|
*id = ADIS1650X::READ_OUT_CONFIG;
|
|
buildCommandFromCommand(*id, nullptr, 0);
|
|
break;
|
|
}
|
|
case (InternalState::STARTUP): {
|
|
return NOTHING_TO_SEND;
|
|
break;
|
|
}
|
|
default: {
|
|
// Might be a configuration error
|
|
sif::debug << "GyroADIS16507Handler::buildTransitionDeviceCommand: "
|
|
"Unknown internal state!"
|
|
<< std::endl;
|
|
return returnvalue::OK;
|
|
}
|
|
}
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::buildCommandFromCommand(DeviceCommandId_t deviceCommand,
|
|
const uint8_t *commandData,
|
|
size_t commandDataLen) {
|
|
switch (deviceCommand) {
|
|
case (ADIS1650X::READ_OUT_CONFIG): {
|
|
this->rawPacketLen = ADIS1650X::CONFIG_READOUT_SIZE;
|
|
uint8_t regList[6] = {};
|
|
regList[0] = ADIS1650X::DIAG_STAT_REG;
|
|
regList[1] = ADIS1650X::FILTER_CTRL_REG;
|
|
regList[2] = ADIS1650X::RANG_MDL_REG;
|
|
regList[3] = ADIS1650X::MSC_CTRL_REG;
|
|
regList[4] = ADIS1650X::DEC_RATE_REG;
|
|
regList[5] = ADIS1650X::PROD_ID_REG;
|
|
prepareReadCommand(regList, sizeof(regList));
|
|
this->rawPacket = commandBuffer.data();
|
|
break;
|
|
}
|
|
case (ADIS1650X::READ_SENSOR_DATA): {
|
|
if (breakCountdown.isBusy()) {
|
|
// A glob command is pending and sensor data can't be read currently
|
|
return NO_REPLY_EXPECTED;
|
|
}
|
|
std::memcpy(commandBuffer.data(), ADIS1650X::BURST_READ_ENABLE.data(),
|
|
ADIS1650X::BURST_READ_ENABLE.size());
|
|
std::memset(commandBuffer.data() + 2, 0, 10 * 2);
|
|
this->rawPacketLen = ADIS1650X::SENSOR_READOUT_SIZE;
|
|
this->rawPacket = commandBuffer.data();
|
|
break;
|
|
}
|
|
case (ADIS1650X::SELF_TEST_SENSORS): {
|
|
if (breakCountdown.isBusy()) {
|
|
// Another glob command is pending
|
|
return HasActionsIF::IS_BUSY;
|
|
}
|
|
prepareWriteCommand(ADIS1650X::GLOB_CMD, ADIS1650X::GlobCmds::SENSOR_SELF_TEST, 0x00);
|
|
breakCountdown.setTimeout(ADIS1650X::SELF_TEST_BREAK);
|
|
break;
|
|
}
|
|
case (ADIS1650X::SELF_TEST_MEMORY): {
|
|
if (breakCountdown.isBusy()) {
|
|
// Another glob command is pending
|
|
return HasActionsIF::IS_BUSY;
|
|
}
|
|
prepareWriteCommand(ADIS1650X::GLOB_CMD, ADIS1650X::GlobCmds::FLASH_MEMORY_TEST, 0x00);
|
|
breakCountdown.setTimeout(ADIS1650X::FLASH_MEMORY_TEST_BREAK);
|
|
break;
|
|
}
|
|
case (ADIS1650X::UPDATE_NV_CONFIGURATION): {
|
|
if (breakCountdown.isBusy()) {
|
|
// Another glob command is pending
|
|
return HasActionsIF::IS_BUSY;
|
|
}
|
|
prepareWriteCommand(ADIS1650X::GLOB_CMD, ADIS1650X::GlobCmds::FLASH_MEMORY_UPDATE, 0x00);
|
|
breakCountdown.setTimeout(ADIS1650X::FLASH_MEMORY_UPDATE_BREAK);
|
|
break;
|
|
}
|
|
case (ADIS1650X::RESET_SENSOR_CONFIGURATION): {
|
|
if (breakCountdown.isBusy()) {
|
|
// Another glob command is pending
|
|
return HasActionsIF::IS_BUSY;
|
|
}
|
|
prepareWriteCommand(ADIS1650X::GLOB_CMD, ADIS1650X::GlobCmds::FACTORY_CALIBRATION, 0x00);
|
|
breakCountdown.setTimeout(ADIS1650X::FACTORY_CALIBRATION_BREAK);
|
|
break;
|
|
}
|
|
case (ADIS1650X::SW_RESET): {
|
|
if (breakCountdown.isBusy()) {
|
|
// Another glob command is pending
|
|
return HasActionsIF::IS_BUSY;
|
|
}
|
|
prepareWriteCommand(ADIS1650X::GLOB_CMD, ADIS1650X::GlobCmds::SOFTWARE_RESET, 0x00);
|
|
breakCountdown.setTimeout(ADIS1650X::SW_RESET_BREAK);
|
|
break;
|
|
}
|
|
case (ADIS1650X::PRINT_CURRENT_CONFIGURATION): {
|
|
#if OBSW_VERBOSE_LEVEL >= 1
|
|
PoolReadGuard pg(&configDataset);
|
|
sif::info << "ADIS16507 Sensor configuration: DIAG_STAT: 0x" << std::hex << std::setw(4)
|
|
<< std::setfill('0') << "0x" << configDataset.diagStatReg.value << std::endl;
|
|
sif::info << "MSC_CTRL: " << std::hex << std::setw(4) << "0x"
|
|
<< configDataset.mscCtrlReg.value << " | FILT_CTRL: 0x"
|
|
<< configDataset.filterSetting.value << " | DEC_RATE: 0x"
|
|
<< configDataset.decRateReg.value << std::setfill(' ') << std::endl;
|
|
#endif /* OBSW_VERBOSE_LEVEL >= 1 */
|
|
}
|
|
}
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
void GyroADIS1650XHandler::fillCommandAndReplyMap() {
|
|
insertInCommandAndReplyMap(ADIS1650X::READ_SENSOR_DATA, 1, &primaryDataset);
|
|
insertInCommandAndReplyMap(ADIS1650X::READ_OUT_CONFIG, 1, &configDataset);
|
|
insertInCommandAndReplyMap(ADIS1650X::SELF_TEST_SENSORS, 1);
|
|
insertInCommandAndReplyMap(ADIS1650X::SELF_TEST_MEMORY, 1);
|
|
insertInCommandAndReplyMap(ADIS1650X::UPDATE_NV_CONFIGURATION, 1);
|
|
insertInCommandAndReplyMap(ADIS1650X::RESET_SENSOR_CONFIGURATION, 1);
|
|
insertInCommandAndReplyMap(ADIS1650X::SW_RESET, 1);
|
|
insertInCommandAndReplyMap(ADIS1650X::PRINT_CURRENT_CONFIGURATION, 1);
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::scanForReply(const uint8_t *start, size_t remainingSize,
|
|
DeviceCommandId_t *foundId, size_t *foundLen) {
|
|
// For SPI, the ID will always be the one of the last sent command
|
|
*foundId = this->getPendingCommand();
|
|
*foundLen = this->rawPacketLen;
|
|
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::interpretDeviceReply(DeviceCommandId_t id,
|
|
const uint8_t *packet) {
|
|
using namespace ADIS1650X;
|
|
switch (id) {
|
|
case (ADIS1650X::READ_OUT_CONFIG): {
|
|
uint16_t readProdId = packet[12] << 8 | packet[13];
|
|
if (((adisType == ADIS1650X::Type::ADIS16507) and (readProdId != ADIS1650X::PROD_ID_16507)) or
|
|
((adisType == ADIS1650X::Type::ADIS16505) and (readProdId != ADIS1650X::PROD_ID_16505))) {
|
|
#if OBSW_VERBOSE_LEVEL >= 1
|
|
if (warningSwitch) {
|
|
sif::warning << "GyroADIS1650XHandler::interpretDeviceReply: Invalid product ID "
|
|
<< readProdId << std::endl;
|
|
}
|
|
warningSwitch = false;
|
|
#endif
|
|
return returnvalue::FAILED;
|
|
}
|
|
PoolReadGuard rg(&configDataset);
|
|
configDataset.diagStatReg.value = packet[2] << 8 | packet[3];
|
|
configDataset.filterSetting.value = packet[4] << 8 | packet[5];
|
|
uint16_t rangMdlRaw = packet[6] << 8 | packet[7];
|
|
ADIS1650X::RangMdlBitfield bitfield =
|
|
static_cast<ADIS1650X::RangMdlBitfield>((rangMdlRaw >> 2) & 0b11);
|
|
switch (bitfield) {
|
|
case (ADIS1650X::RangMdlBitfield::RANGE_125_1BMLZ): {
|
|
sensitivity = SENSITIVITY_1BMLZ;
|
|
break;
|
|
}
|
|
case (ADIS1650X::RangMdlBitfield::RANGE_500_2BMLZ): {
|
|
sensitivity = SENSITIVITY_2BMLZ;
|
|
break;
|
|
}
|
|
case (ADIS1650X::RangMdlBitfield::RANGE_2000_3BMLZ): {
|
|
sensitivity = SENSITIVITY_3BMLZ;
|
|
break;
|
|
}
|
|
case (RangMdlBitfield::RESERVED): {
|
|
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
|
sif::error << "ADIS1650X: Unexpected value for RANG_MDL register" << std::endl;
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
configDataset.rangMdl.value = rangMdlRaw;
|
|
configDataset.mscCtrlReg.value = packet[8] << 8 | packet[9];
|
|
configDataset.decRateReg.value = packet[10] << 8 | packet[11];
|
|
configDataset.setValidity(true, true);
|
|
if (internalState == InternalState::CONFIG) {
|
|
commandExecuted = true;
|
|
}
|
|
break;
|
|
}
|
|
case (ADIS1650X::READ_SENSOR_DATA): {
|
|
return handleSensorData(packet);
|
|
}
|
|
}
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::handleSensorData(const uint8_t *packet) {
|
|
BurstModes burstMode = getBurstMode();
|
|
switch (burstMode) {
|
|
case (BurstModes::BURST_16_BURST_SEL_1):
|
|
case (BurstModes::BURST_32_BURST_SEL_1): {
|
|
sif::warning << "GyroADIS1650XHandler::interpretDeviceReply: Analysis with BURST_SEL1"
|
|
" not implemented!"
|
|
<< std::endl;
|
|
return returnvalue::OK;
|
|
}
|
|
case (BurstModes::BURST_16_BURST_SEL_0): {
|
|
uint16_t checksum = packet[20] << 8 | packet[21];
|
|
// Now verify the read checksum with the expected checksum according to datasheet p. 20
|
|
uint16_t calcChecksum = 0;
|
|
for (size_t idx = 2; idx < 20; idx++) {
|
|
calcChecksum += packet[idx];
|
|
}
|
|
if (checksum != calcChecksum) {
|
|
#if OBSW_VERBOSE_LEVEL >= 1
|
|
sif::warning << "GyroADIS1650XHandler::interpretDeviceReply: "
|
|
"Invalid checksum detected!"
|
|
<< std::endl;
|
|
#endif
|
|
return returnvalue::FAILED;
|
|
}
|
|
|
|
ReturnValue_t result = configDataset.diagStatReg.read();
|
|
if (result == returnvalue::OK) {
|
|
configDataset.diagStatReg.value = packet[2] << 8 | packet[3];
|
|
configDataset.diagStatReg.setValid(true);
|
|
}
|
|
configDataset.diagStatReg.commit();
|
|
|
|
{
|
|
PoolReadGuard pg(&primaryDataset);
|
|
int16_t angVelocXRaw = packet[4] << 8 | packet[5];
|
|
primaryDataset.angVelocX.value = static_cast<float>(angVelocXRaw) * sensitivity;
|
|
int16_t angVelocYRaw = packet[6] << 8 | packet[7];
|
|
primaryDataset.angVelocY.value = static_cast<float>(angVelocYRaw) * sensitivity;
|
|
int16_t angVelocZRaw = packet[8] << 8 | packet[9];
|
|
primaryDataset.angVelocZ.value = static_cast<float>(angVelocZRaw) * sensitivity;
|
|
|
|
float accelScaling = 0;
|
|
if (adisType == ADIS1650X::Type::ADIS16507) {
|
|
accelScaling = ADIS1650X::ACCELEROMETER_RANGE_16507;
|
|
} else if (adisType == ADIS1650X::Type::ADIS16505) {
|
|
accelScaling = ADIS1650X::ACCELEROMETER_RANGE_16505;
|
|
} else {
|
|
sif::warning << "GyroADIS1650XHandler::handleSensorData: "
|
|
"Unknown ADIS type"
|
|
<< std::endl;
|
|
}
|
|
int16_t accelXRaw = packet[10] << 8 | packet[11];
|
|
primaryDataset.accelX.value = static_cast<float>(accelXRaw) / INT16_MAX * accelScaling;
|
|
int16_t accelYRaw = packet[12] << 8 | packet[13];
|
|
primaryDataset.accelY.value = static_cast<float>(accelYRaw) / INT16_MAX * accelScaling;
|
|
int16_t accelZRaw = packet[14] << 8 | packet[15];
|
|
primaryDataset.accelZ.value = static_cast<float>(accelZRaw) / INT16_MAX * accelScaling;
|
|
|
|
int16_t temperatureRaw = packet[16] << 8 | packet[17];
|
|
primaryDataset.temperature.value = static_cast<float>(temperatureRaw) * 0.1;
|
|
// Ignore data counter for now
|
|
primaryDataset.setValidity(true, true);
|
|
}
|
|
|
|
if (periodicPrintout) {
|
|
if (debugDivider.checkAndIncrement()) {
|
|
sif::info << "GyroADIS1650XHandler: Angular velocities in deg / s" << std::endl;
|
|
sif::info << "X: " << primaryDataset.angVelocX.value << std::endl;
|
|
sif::info << "Y: " << primaryDataset.angVelocY.value << std::endl;
|
|
sif::info << "Z: " << primaryDataset.angVelocZ.value << std::endl;
|
|
sif::info << "GyroADIS1650XHandler: Accelerations in m / s^2: " << std::endl;
|
|
sif::info << "X: " << primaryDataset.accelX.value << std::endl;
|
|
sif::info << "Y: " << primaryDataset.accelY.value << std::endl;
|
|
sif::info << "Z: " << primaryDataset.accelZ.value << std::endl;
|
|
}
|
|
}
|
|
|
|
break;
|
|
}
|
|
case (BurstModes::BURST_32_BURST_SEL_0): {
|
|
break;
|
|
}
|
|
}
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
uint32_t GyroADIS1650XHandler::getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo) { return 6000; }
|
|
|
|
void GyroADIS1650XHandler::prepareWriteCommand(uint8_t startReg, uint8_t valueOne,
|
|
uint8_t valueTwo) {
|
|
uint8_t secondReg = startReg + 1;
|
|
startReg |= ADIS1650X::WRITE_MASK;
|
|
secondReg |= ADIS1650X::WRITE_MASK;
|
|
commandBuffer[0] = startReg;
|
|
commandBuffer[1] = valueOne;
|
|
commandBuffer[2] = secondReg;
|
|
commandBuffer[3] = valueTwo;
|
|
this->rawPacketLen = 4;
|
|
this->rawPacket = commandBuffer.data();
|
|
}
|
|
|
|
void GyroADIS1650XHandler::prepareReadCommand(uint8_t *regList, size_t len) {
|
|
for (size_t idx = 0; idx < len; idx++) {
|
|
commandBuffer[idx * 2] = regList[idx];
|
|
commandBuffer[idx * 2 + 1] = 0x00;
|
|
}
|
|
commandBuffer[len * 2] = 0x00;
|
|
commandBuffer[len * 2 + 1] = 0x00;
|
|
}
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::initializeLocalDataPool(localpool::DataPool &localDataPoolMap,
|
|
LocalDataPoolManager &poolManager) {
|
|
localDataPoolMap.emplace(ADIS1650X::ANG_VELOC_X, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::ANG_VELOC_Y, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::ANG_VELOC_Z, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::ACCELERATION_X, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::ACCELERATION_Y, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::ACCELERATION_Z, new PoolEntry<double>({0.0}));
|
|
localDataPoolMap.emplace(ADIS1650X::TEMPERATURE, new PoolEntry<float>({0.0}));
|
|
|
|
localDataPoolMap.emplace(ADIS1650X::DIAG_STAT_REGISTER, new PoolEntry<uint16_t>());
|
|
localDataPoolMap.emplace(ADIS1650X::FILTER_SETTINGS, new PoolEntry<uint8_t>());
|
|
localDataPoolMap.emplace(ADIS1650X::MSC_CTRL_REGISTER, new PoolEntry<uint16_t>());
|
|
localDataPoolMap.emplace(ADIS1650X::DEC_RATE_REGISTER, new PoolEntry<uint16_t>());
|
|
poolManager.subscribeForRegularPeriodicPacket(
|
|
subdp::RegularHkPeriodicParams(primaryDataset.getSid(), false, 5.0));
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
GyroADIS1650XHandler::BurstModes GyroADIS1650XHandler::getBurstMode() {
|
|
configDataset.mscCtrlReg.read();
|
|
uint16_t currentCtrlReg = configDataset.mscCtrlReg.value;
|
|
configDataset.mscCtrlReg.commit();
|
|
if ((currentCtrlReg & ADIS1650X::BURST_32_BIT) == ADIS1650X::BURST_32_BIT) {
|
|
if ((currentCtrlReg & ADIS1650X::BURST_SEL_BIT) == ADIS1650X::BURST_SEL_BIT) {
|
|
return BurstModes::BURST_32_BURST_SEL_1;
|
|
} else {
|
|
return BurstModes::BURST_32_BURST_SEL_0;
|
|
}
|
|
} else {
|
|
if ((currentCtrlReg & ADIS1650X::BURST_SEL_BIT) == ADIS1650X::BURST_SEL_BIT) {
|
|
return BurstModes::BURST_16_BURST_SEL_1;
|
|
} else {
|
|
return BurstModes::BURST_16_BURST_SEL_0;
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef FSFW_OSAL_LINUX
|
|
|
|
ReturnValue_t GyroADIS1650XHandler::spiSendCallback(SpiComIF *comIf, SpiCookie *cookie,
|
|
const uint8_t *sendData, size_t sendLen,
|
|
void *args) {
|
|
GyroADIS1650XHandler *handler = reinterpret_cast<GyroADIS1650XHandler *>(args);
|
|
if (handler == nullptr) {
|
|
sif::error << "GyroADIS16507Handler::spiSendCallback: Passed handler pointer is invalid!"
|
|
<< std::endl;
|
|
return returnvalue::FAILED;
|
|
}
|
|
DeviceCommandId_t currentCommand = handler->getPendingCommand();
|
|
switch (currentCommand) {
|
|
case (ADIS1650X::READ_SENSOR_DATA): {
|
|
return comIf->performRegularSendOperation(cookie, sendData, sendLen);
|
|
}
|
|
case (ADIS1650X::READ_OUT_CONFIG):
|
|
default: {
|
|
ReturnValue_t result = returnvalue::OK;
|
|
int retval = 0;
|
|
// Prepare transfer
|
|
int fileDescriptor = 0;
|
|
std::string device = comIf->getSpiDev();
|
|
UnixFileGuard fileHelper(device, fileDescriptor, O_RDWR, "SpiComIF::sendMessage");
|
|
if (fileHelper.getOpenResult() != returnvalue::OK) {
|
|
return SpiComIF::OPENING_FILE_FAILED;
|
|
}
|
|
spi::SpiModes spiMode = spi::SpiModes::MODE_0;
|
|
uint32_t spiSpeed = 0;
|
|
cookie->getSpiParameters(spiMode, spiSpeed, nullptr);
|
|
comIf->setSpiSpeedAndMode(fileDescriptor, spiMode, spiSpeed);
|
|
cookie->assignWriteBuffer(sendData);
|
|
cookie->setTransferSize(2);
|
|
|
|
gpioId_t gpioId = cookie->getChipSelectPin();
|
|
GpioIF &gpioIF = comIf->getGpioInterface();
|
|
MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
|
|
uint32_t timeoutMs = 0;
|
|
MutexIF *mutex = comIf->getCsMutex();
|
|
cookie->getMutexParams(timeoutType, timeoutMs);
|
|
if (mutex == nullptr) {
|
|
#if OBSW_VERBOSE_LEVEL >= 1
|
|
sif::warning << "GyroADIS16507Handler::spiSendCallback: "
|
|
"Mutex or GPIO interface invalid"
|
|
<< std::endl;
|
|
return returnvalue::FAILED;
|
|
#endif
|
|
}
|
|
|
|
if (gpioId != gpio::NO_GPIO) {
|
|
result = mutex->lockMutex(timeoutType, timeoutMs);
|
|
if (result != returnvalue::OK) {
|
|
#if FSFW_CPP_OSTREAM_ENABLED == 1
|
|
sif::error << "SpiComIF::sendMessage: Failed to lock mutex" << std::endl;
|
|
#endif
|
|
return result;
|
|
}
|
|
}
|
|
|
|
size_t idx = 0;
|
|
spi_ioc_transfer *transferStruct = cookie->getTransferStructHandle();
|
|
uint64_t origTx = transferStruct->tx_buf;
|
|
uint64_t origRx = transferStruct->rx_buf;
|
|
while (idx < sendLen) {
|
|
// Pull SPI CS low. For now, no support for active high given
|
|
if (gpioId != gpio::NO_GPIO) {
|
|
gpioIF.pullLow(gpioId);
|
|
}
|
|
|
|
// Execute transfer
|
|
// Initiate a full duplex SPI transfer.
|
|
retval = ioctl(fileDescriptor, SPI_IOC_MESSAGE(1), cookie->getTransferStructHandle());
|
|
if (retval < 0) {
|
|
utility::handleIoctlError("SpiComIF::sendMessage: ioctl error.");
|
|
result = SpiComIF::FULL_DUPLEX_TRANSFER_FAILED;
|
|
}
|
|
#if FSFW_HAL_SPI_WIRETAPPING == 1
|
|
comIf->performSpiWiretapping(cookie);
|
|
#endif /* FSFW_LINUX_SPI_WIRETAPPING == 1 */
|
|
|
|
if (gpioId != gpio::NO_GPIO) {
|
|
gpioIF.pullHigh(gpioId);
|
|
}
|
|
|
|
idx += 2;
|
|
if (idx < sendLen) {
|
|
usleep(ADIS1650X::STALL_TIME_MICROSECONDS);
|
|
}
|
|
|
|
transferStruct->tx_buf += 2;
|
|
transferStruct->rx_buf += 2;
|
|
}
|
|
transferStruct->tx_buf = origTx;
|
|
transferStruct->rx_buf = origRx;
|
|
if (gpioId != gpio::NO_GPIO) {
|
|
mutex->unlockMutex();
|
|
}
|
|
}
|
|
}
|
|
return returnvalue::OK;
|
|
}
|
|
|
|
void GyroADIS1650XHandler::setToGoToNormalModeImmediately() { goToNormalMode = true; }
|
|
|
|
void GyroADIS1650XHandler::enablePeriodicPrintouts(bool enable, uint8_t divider) {
|
|
periodicPrintout = enable;
|
|
debugDivider.setDivider(divider);
|
|
}
|
|
|
|
#endif /* OBSW_ADIS1650X_LINUX_COM_IF == 1 */
|