eive-obsw/bsp_hosted/OBSWConfig.h.in
Robin Mueller aa2bfb7d0e
All checks were successful
EIVE/eive-obsw/pipeline/pr-main This commit looks good
Re-work MPSoC handler module
2024-04-30 15:14:22 +02:00

128 lines
5.5 KiB
C

/**
* @brief This file can be used to add preprocessor define for conditional
* code inclusion exclusion or various other project constants and
* properties in one place.
*/
#ifndef FSFWCONFIG_OBSWCONFIG_H_
#define FSFWCONFIG_OBSWCONFIG_H_
#include "commonConfig.h"
/*******************************************************************/
/** All of the following flags should be enabled for mission code */
/*******************************************************************/
#define OBSW_ENABLE_TIMERS 1
#define OBSW_ADD_STAR_TRACKER 0
#define OBSW_ADD_PLOC_SUPERVISOR 0
#define OBSW_ADD_PLOC_MPSOC 0
#define OBSW_ADD_SUN_SENSORS 0
#define OBSW_ADD_MGT 0
#define OBSW_ADD_ACS_BOARD 0
#define OBSW_ADD_ACS_HANDLERS 0
#define OBSW_ADD_GPS_0 0
#define OBSW_ADD_GPS_1 0
#define OBSW_ADD_RW 0
#define OBSW_DEBUG_TMP1075 0
#define OBSW_ADD_BPX_BATTERY_HANDLER 0
#define OBSW_ADD_RTD_DEVICES 0
#define OBSW_ADD_PL_PCDU 0
#define OBSW_ADD_TMP_DEVICES 0
#define OBSW_ADD_RAD_SENSORS 0
#define OBSW_ADD_SYRLINKS 0
#define OBSW_STAR_TRACKER_GROUND_CONFIG 1
// This is a really tricky switch.. It initializes the PCDU switches to their default states
// at powerup. I think it would be better
// to leave it off for now. It makes testing a lot more difficult and it might mess with
// something the operators might want to do by giving the software too much intelligence
// at the wrong place. The system component might command all the Switches accordingly anyway
#define OBSW_INITIALIZE_SWITCHES 0
#define OBSW_ENABLE_PERIODIC_HK 0
/*******************************************************************/
/** All of the following flags should be disabled for mission code */
/*******************************************************************/
// Can be used to switch device to NORMAL mode immediately
#define OBSW_SWITCH_TO_NORMAL_MODE_AFTER_STARTUP 1
#define OBSW_PRINT_MISSED_DEADLINES 1
#define OBSW_MPSOC_JTAG_BOOT 0
#define OBSW_SYRLINKS_SIMULATED 1
#define OBSW_ADD_TEST_CODE 0
#define OBSW_ADD_TEST_TASK 0
#define OBSW_ADD_TEST_PST 0
// If this is enabled, all other SPI code should be disabled
#define OBSW_ADD_SPI_TEST_CODE 0
// If this is enabled, all other I2C code should be disabled
#define OBSW_ADD_I2C_TEST_CODE 0
#define OBSW_ADD_UART_TEST_CODE 0
#define OBSW_TEST_ACS 0
#define OBSW_DEBUG_ACS 0
#define OBSW_TEST_SUS 0
#define OBSW_DEBUG_SUS 0
#define OBSW_TEST_RTD 0
#define OBSW_DEBUG_RTD 0
#define OBSW_TEST_RAD_SENSOR 0
#define OBSW_DEBUG_RAD_SENSOR 0
#define OBSW_TEST_PL_PCDU 0
#define OBSW_DEBUG_PL_PCDU 0
#define OBSW_TEST_BPX_BATT 0
#define OBSW_DEBUG_BPX_BATT 0
#define OBSW_TEST_IMTQ 0
#define OBSW_DEBUG_IMTQ 0
#define OBSW_TEST_RW 0
#define OBSW_DEBUG_RW 0
#define OBSW_TEST_LIBGPIOD 0
#define OBSW_TEST_PLOC_HANDLER 0
#define OBSW_TEST_CCSDS_BRIDGE 0
#define OBSW_TEST_CCSDS_PTME 0
#define OBSW_TEST_TE7020_HEATER 0
#define OBSW_TEST_GPIO_OPEN_BY_LABEL 0
#define OBSW_TEST_GPIO_OPEN_BY_LINE_NAME 0
#define OBSW_DEBUG_P60DOCK 0
#define OBSW_PRINT_CORE_HK 0
#define OBSW_DEBUG_PDU1 0
#define OBSW_DEBUG_PDU2 0
#define OBSW_DEBUG_GPS 0
#define OBSW_DEBUG_ACU 0
#define OBSW_DEBUG_SYRLINKS 0
#define OBSW_DEBUG_PDEC_HANDLER 0
#define OBSW_DEBUG_PLOC_SUPERVISOR 0
#define OBSW_DEBUG_PLOC_MPSOC 0
#define OBSW_DEBUG_STARTRACKER 0
#define OBSW_TCP_SERVER_WIRETAPPING 0
/*******************************************************************/
/** CMake Defines */
/*******************************************************************/
#define OBSW_ADD_TMTC_UDP_SERVER 0
#define OBSW_ADD_TMTC_TCP_SERVER 1
#cmakedefine EIVE_BUILD_GPSD_GPS_HANDLER
#cmakedefine LIBGPS_VERSION_MAJOR @LIBGPS_VERSION_MAJOR@
#cmakedefine LIBGPS_VERSION_MINOR @LIBGPS_VERSION_MINOR@
#ifdef RASPBERRY_PI
#include "rpiConfig.h"
#elif defined(XIPHOS_Q7S)
#include "q7sConfig.h"
#endif
#ifdef __cplusplus
#include "objects/systemObjectList.h"
#include "events/subsystemIdRanges.h"
#include "returnvalues/classIds.h"
#endif
#endif /* FSFWCONFIG_OBSWCONFIG_H_ */