Ulrich Mohr
c0e896b371
Some checks failed
EIVE/eive-obsw/pipeline/head There was a failure building this commit
85 lines
2.5 KiB
C++
85 lines
2.5 KiB
C++
#ifndef MISSION_DEVICES_MAX1227_H_
|
|
#define MISSION_DEVICES_MAX1227_H_
|
|
|
|
#include <cstddef>
|
|
#include <cstdint>
|
|
|
|
namespace max1227 {
|
|
|
|
enum ScanModes : uint8_t {
|
|
CHANNELS_0_TO_N = 0b00,
|
|
CHANNEL_N_TO_HIGHEST = 0b01,
|
|
N_REPEATEDLY = 0b10,
|
|
N_ONCE = 0b11
|
|
};
|
|
|
|
enum ClkSel : uint8_t {
|
|
INT_CONV_INT_TIMED_CNVST_AS_CNVST = 0b00,
|
|
INT_CONV_EXT_TIMED_CNVST = 0b01,
|
|
// Default mode upon power-up
|
|
INT_CONV_INT_TIMED_CNVST_AS_AIN = 0b10,
|
|
// Use external SPI clock for conversion and timing
|
|
EXT_CONV_EXT_TIMED = 0b11
|
|
};
|
|
|
|
enum RefSel : uint8_t {
|
|
INT_REF_WITH_WAKEUP = 0b00,
|
|
// No wakeup delay needed
|
|
EXT_REF_SINGLE_ENDED = 0b01,
|
|
INT_REF_NO_WAKEUP = 0b10,
|
|
// No wakeup delay needed
|
|
EXT_REF_DIFFERENTIAL = 0b11
|
|
};
|
|
|
|
enum DiffSel : uint8_t {
|
|
NONE_0 = 0b00,
|
|
NONE_1 = 0b01,
|
|
// One unipolar config byte follows the setup byte
|
|
UNIPOLAR_CFG = 0b10,
|
|
// One bipolar config byte follows the setup byte
|
|
BIPOLAR_CFG = 0b11
|
|
};
|
|
|
|
constexpr uint8_t buildResetByte(bool fifoOnly) { return (1 << 4) | (fifoOnly << 3); }
|
|
|
|
constexpr uint8_t buildConvByte(ScanModes scanMode, uint8_t channel, bool readTemp) {
|
|
return (1 << 7) | (channel << 3) | (scanMode << 1) | readTemp;
|
|
}
|
|
|
|
constexpr uint8_t buildSetupByte(ClkSel clkSel, RefSel refSel, DiffSel diffSel) {
|
|
return (1 << 6) | (clkSel << 4) | (refSel << 2) | diffSel;
|
|
}
|
|
|
|
/**
|
|
* If there is a wakeup delay, there needs to be a 65 us delay between sending
|
|
* the first byte (conversion byte) and the the rest of the SPI buffer.
|
|
* The raw ADC value will be located in the first and second reply byte.
|
|
* @param spiBuf
|
|
* @param n
|
|
* @param sz
|
|
*/
|
|
void prepareExternallyClockedSingleChannelRead(uint8_t* spiBuf, uint8_t channel, uint32_t& sz);
|
|
|
|
/**
|
|
* If there is a wakeup delay, there needs to be a 65 us delay between sending
|
|
* the first byte (first conversion byte) the the rest of the SPI buffer.
|
|
* @param spiBuf
|
|
* @param n Channel number. Example: If the ADC has 6 channels, n will be 5
|
|
* @param sz Will be incremented by amount which should be sent
|
|
*/
|
|
void prepareExternallyClockedRead0ToN(uint8_t* spiBuf, uint8_t n, size_t& sz);
|
|
|
|
/**
|
|
* Prepare an externally clocked temperature read. 25 bytes have to be sent
|
|
* and the raw temperature value will appear on the last 2 bytes of the reply.
|
|
* @param spiBuf
|
|
* @param sz Will be incremented by amount which should be sent
|
|
*/
|
|
void prepareExternallyClockedTemperatureRead(uint8_t* spiBuf, size_t& sz);
|
|
|
|
float getTemperature(uint16_t raw);
|
|
|
|
} // namespace max1227
|
|
|
|
#endif /* MISSION_DEVICES_MAX1227_H_ */
|