eive-obsw/mission/devices/devicedefinitions/payloadPcduDefinitions.h

232 lines
9.2 KiB
C++

#ifndef LINUX_DEVICES_DEVICEDEFINITIONS_PAYLOADPCDUDEFINITIONS_H_
#define LINUX_DEVICES_DEVICEDEFINITIONS_PAYLOADPCDUDEFINITIONS_H_
#include <fsfw/datapoollocal/StaticLocalDataSet.h>
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
#include <cstddef>
#include <filesystem>
#include <nlohmann/json.hpp>
#include "OBSWConfig.h"
#include "mission/devices/max1227.h"
#include "mission/memory/NVMParameterBase.h"
namespace plpcdu {
using namespace max1227;
enum PlPcduAdcChannels : uint8_t {
U_BAT_DIV_6 = 0,
// According to schematic, will be 2.2158V for Vneg = +0V and 0.2446V for Vneg = -6V
// Full Forumula: V_neg = V_post - (R1 + R2) / R1 * (V_pos - V_out) with R1 being 27.4k
// and R2 being 49.9k. FB = Feedback
U_NEG_V_FB = 1,
I_HPA = 2,
U_HPA_DIV_6 = 3,
I_MPA = 4,
U_MPA_DIV_6 = 5,
I_TX = 6,
U_TX_DIV_6 = 7,
I_X8 = 8,
U_X8_DIV_6 = 9,
I_DRO = 10,
U_DRO_DIV_6 = 11,
NUM_CHANNELS = 12
};
enum PlPcduParamIds : uint8_t {
NEG_V_LOWER_BOUND = 0,
NEG_V_UPPER_BOUND = 1,
DRO_U_LOWER_BOUND = 2,
DRO_U_UPPER_BOUND = 3,
DRO_I_UPPER_BOUND = 4,
X8_U_LOWER_BOUND = 5,
X8_U_UPPER_BOUND = 6,
X8_I_UPPER_BOUND = 7,
TX_U_LOWER_BOUND = 8,
TX_U_UPPER_BOUND = 9,
TX_I_UPPER_BOUND = 10,
MPA_U_LOWER_BOUND = 11,
MPA_U_UPPER_BOUND = 12,
MPA_I_UPPER_BOUND = 13,
HPA_U_LOWER_BOUND = 14,
HPA_U_UPPER_BOUND = 15,
HPA_I_UPPER_BOUND = 16,
SSR_TO_DRO_WAIT_TIME = 17,
DRO_TO_X8_WAIT_TIME = 18,
X8_TO_TX_WAIT_TIME = 19,
TX_TO_MPA_WAIT_TIME = 20,
MPA_TO_HPA_WAIT_TIME = 21,
INJECT_SSR_TO_DRO_FAILURE = 30,
INJECT_DRO_TO_X8_FAILURE = 31,
INJECT_X8_TO_TX_FAILURE = 32,
INJECT_TX_TO_MPA_FAILURE = 33,
INJECT_MPA_TO_HPA_FAILURE = 34,
INJECT_ALL_ON_FAILURE = 35
};
static std::map<PlPcduParamIds, std::string> PARAM_KEY_MAP = {
{NEG_V_LOWER_BOUND, "negVoltLowerBound"}, {NEG_V_UPPER_BOUND, "negVoltUpperBound"},
{DRO_U_LOWER_BOUND, "droVoltLowerBound"}, {DRO_U_UPPER_BOUND, "droVoltUpperBound"},
{DRO_I_UPPER_BOUND, "droCurrUpperBound"}, {X8_U_LOWER_BOUND, "x8VoltLowerBound"},
{X8_U_UPPER_BOUND, "x8VoltUpperBound"}, {X8_I_UPPER_BOUND, "x8CurrUpperBound"},
{TX_U_LOWER_BOUND, "txVoltLowerBound"}, {TX_U_UPPER_BOUND, "txVoltUpperBound"},
{TX_I_UPPER_BOUND, "txCurrUpperBound"}, {MPA_U_LOWER_BOUND, "mpaVoltLowerBound"},
{MPA_U_UPPER_BOUND, "mpaVoltUpperBound"}, {MPA_I_UPPER_BOUND, "mpaCurrUpperBound"},
{HPA_U_LOWER_BOUND, "hpaVoltLowerBound"}, {HPA_U_UPPER_BOUND, "hpaVoltUpperBound"},
{HPA_I_UPPER_BOUND, "hpaCurrUpperBound"}, {SSR_TO_DRO_WAIT_TIME, "ssrToDroWait"},
{DRO_TO_X8_WAIT_TIME, "droToX8Wait"}, {X8_TO_TX_WAIT_TIME, "x8ToTxWait"},
{TX_TO_MPA_WAIT_TIME, "txToMpaWait"}, {MPA_TO_HPA_WAIT_TIME, "mpaToHpaWait"},
};
enum PlPcduPoolIds : uint32_t { CHANNEL_VEC = 0, PROCESSED_VEC = 1, TEMP = 2 };
static constexpr size_t MAX_ADC_REPLY_SIZE = 64;
static constexpr DeviceCommandId_t READ_CMD = 0;
static constexpr DeviceCommandId_t SETUP_CMD = 1;
static constexpr DeviceCommandId_t READ_TEMP_EXT = 2;
static constexpr DeviceCommandId_t READ_WITH_TEMP_EXT = 3;
static constexpr Submode_t NORMAL_ADC_ONLY = 0;
static constexpr Submode_t NORMAL_ALL_ON = 1;
// 12 ADC values * 2 + trailing zero
static constexpr size_t ADC_REPLY_SIZE = 25;
// Conversion byte + 24 * zero
static constexpr size_t TEMP_REPLY_SIZE = 25;
static constexpr uint8_t SETUP_BYTE =
max1227::buildSetupByte(ClkSel::EXT_CONV_EXT_TIMED, RefSel::INT_REF_NO_WAKEUP, DiffSel::NONE_0);
static constexpr uint32_t ADC_SET_ID = READ_CMD;
static constexpr uint8_t CHANNELS_NUM = 12;
static constexpr uint8_t CHANNEL_N = CHANNELS_NUM - 1;
// Store temperature as well
static constexpr size_t DATASET_ENTRIES = CHANNELS_NUM + 1;
static constexpr uint8_t VOLTAGE_DIV = 6;
// 12-bit ADC: 2 to the power of 12 minus 1
static constexpr uint16_t MAX122X_BIT = 4095;
static constexpr float MAX122X_VREF = 2.5;
static constexpr float GAIN_INA169 = 100.0;
static constexpr float R_SHUNT_HPA = 0.008;
static constexpr float R_SHUNT_MPA = 0.015;
static constexpr float R_SHUNT_TX = 0.05;
static constexpr float R_SHUNT_X8 = 0.015;
static constexpr float R_SHUNT_DRO = 0.22;
static constexpr float V_POS = 3.3;
static constexpr float VOLTAGE_DIV_U_NEG = (49.9 + 27.4) / 27.4;
static constexpr float MAX122X_SCALE = MAX122X_VREF / MAX122X_BIT;
static constexpr float SCALE_VOLTAGE = MAX122X_SCALE * VOLTAGE_DIV;
static constexpr float SCALE_CURRENT_HPA = MAX122X_SCALE / (GAIN_INA169 * R_SHUNT_HPA);
static constexpr float SCALE_CURRENT_MPA = MAX122X_SCALE / (GAIN_INA169 * R_SHUNT_MPA);
static constexpr float SCALE_CURRENT_TX = MAX122X_SCALE / (GAIN_INA169 * R_SHUNT_TX);
static constexpr float SCALE_CURRENT_X8 = MAX122X_SCALE / (GAIN_INA169 * R_SHUNT_X8);
static constexpr float SCALE_CURRENT_DRO = MAX122X_SCALE / (GAIN_INA169 * R_SHUNT_DRO);
// TODO: Make these configurable parameters using a JSON file
// Upper bound of currents in milliamperes [mA]
static constexpr double DFT_NEG_V_LOWER_BOUND = -6.5;
static constexpr double DFT_NEG_V_UPPER_BOUND = -2.7;
static constexpr double DFT_DRO_U_LOWER_BOUND = 5.0;
static constexpr double DFT_DRO_U_UPPER_BOUND = 7.0;
// Max Current DRO + Max Current Neg V | 40 + 15
static constexpr double DFT_DRO_I_UPPER_BOUND = 55.0;
static constexpr double DFT_X8_U_LOWER_BOUND = 2.6;
static constexpr double DFT_X8_U_UPPER_BOUND = 4.0;
static constexpr double DFT_X8_I_UPPER_BOUND = 100.0;
static constexpr double DFT_TX_U_LOWER_BOUND = 2.6;
static constexpr double DFT_TX_U_UPPER_BOUND = 4.0;
static constexpr double DFT_TX_I_UPPER_BOUND = 250.0;
static constexpr double DFT_MPA_U_LOWER_BOUND = 2.6;
static constexpr double DFT_MPA_U_UPPER_BOUND = 4.0;
static constexpr double DFT_MPA_I_UPPER_BOUND = 650.0;
static constexpr double DFT_HPA_U_LOWER_BOUND = 9.4;
static constexpr double DFT_HPA_U_UPPER_BOUND = 11.0;
static constexpr double DFT_HPA_I_UPPER_BOUND = 3800.0;
// Wait time in floating point seconds
static constexpr double DFT_SSR_TO_DRO_WAIT_TIME = 5.0;
static constexpr double DFT_DRO_TO_X8_WAIT_TIME = 905.0;
static constexpr double DFT_X8_TO_TX_WAIT_TIME = 5.0;
static constexpr double DFT_TX_TO_MPA_WAIT_TIME = 5.0;
static constexpr double DFT_MPA_TO_HPA_WAIT_TIME = 5.0;
/**
* The current of the processed values is calculated and stored as a milliamperes [mA].
* The voltages are stored as Volt values.
*/
class PlPcduAdcSet : public StaticLocalDataSet<DATASET_ENTRIES> {
public:
PlPcduAdcSet(HasLocalDataPoolIF* owner) : StaticLocalDataSet(owner, ADC_SET_ID) {}
PlPcduAdcSet(object_id_t objectId) : StaticLocalDataSet(sid_t(objectId, ADC_SET_ID)) {}
lp_vec_t<uint16_t, 12> channels = lp_vec_t<uint16_t, 12>(sid.objectId, CHANNEL_VEC, this);
lp_vec_t<float, 12> processed = lp_vec_t<float, 12>(sid.objectId, PROCESSED_VEC, this);
lp_var_t<float> tempC = lp_var_t<float>(sid.objectId, TEMP, this);
};
class PlPcduParameter : public NVMParameterBase {
public:
PlPcduParameter() : NVMParameterBase(""), mountPrefix("") {
using namespace plpcdu;
// Initialize with default values
resetValues();
}
ReturnValue_t initialize(std::string mountPrefix) {
setFullName(mountPrefix + "/conf/plpcdu.json");
ReturnValue_t result = readJsonFile();
if (result != HasReturnvaluesIF::RETURN_OK) {
// File does not exist or reading JSON failed for various reason. Rewrite the JSON file
#if OBSW_VERBOSE_LEVEL >= 1
sif::info << "Creating PL PCDU JSON file at " << getFullName() << std::endl;
#endif
resetValues();
writeJsonFile();
}
return HasReturnvaluesIF::RETURN_OK;
}
void resetValues() {
insertValue(PARAM_KEY_MAP[SSR_TO_DRO_WAIT_TIME], DFT_SSR_TO_DRO_WAIT_TIME);
insertValue(PARAM_KEY_MAP[DRO_TO_X8_WAIT_TIME], DFT_DRO_TO_X8_WAIT_TIME);
insertValue(PARAM_KEY_MAP[X8_TO_TX_WAIT_TIME], DFT_X8_TO_TX_WAIT_TIME);
insertValue(PARAM_KEY_MAP[TX_TO_MPA_WAIT_TIME], DFT_TX_TO_MPA_WAIT_TIME);
insertValue(PARAM_KEY_MAP[MPA_TO_HPA_WAIT_TIME], DFT_MPA_TO_HPA_WAIT_TIME);
insertValue(PARAM_KEY_MAP[NEG_V_LOWER_BOUND], DFT_NEG_V_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[NEG_V_UPPER_BOUND], DFT_NEG_V_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[DRO_U_LOWER_BOUND], DFT_DRO_U_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[DRO_U_UPPER_BOUND], DFT_DRO_U_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[DRO_I_UPPER_BOUND], DFT_DRO_I_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[X8_U_LOWER_BOUND], DFT_X8_U_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[X8_U_UPPER_BOUND], DFT_X8_U_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[X8_I_UPPER_BOUND], DFT_X8_I_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[TX_U_LOWER_BOUND], DFT_TX_U_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[TX_U_UPPER_BOUND], DFT_TX_U_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[TX_I_UPPER_BOUND], DFT_TX_I_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[MPA_U_LOWER_BOUND], DFT_MPA_U_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[MPA_U_UPPER_BOUND], DFT_MPA_U_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[MPA_I_UPPER_BOUND], DFT_MPA_I_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[HPA_U_LOWER_BOUND], DFT_HPA_U_LOWER_BOUND);
insertValue(PARAM_KEY_MAP[HPA_U_UPPER_BOUND], DFT_HPA_U_UPPER_BOUND);
insertValue(PARAM_KEY_MAP[HPA_I_UPPER_BOUND], DFT_HPA_I_UPPER_BOUND);
}
private:
std::string mountPrefix;
};
} // namespace plpcdu
#endif /* LINUX_DEVICES_DEVICEDEFINITIONS_PAYLOADPCDUDEFINITIONS_H_ */