eive-obsw/mission/devices/SolarArrayDeploymentHandler.h
Robin Mueller b1d2f73b01
Some checks failed
EIVE/eive-obsw/pipeline/pr-develop There was a failure building this commit
move Switches enum
2023-03-16 18:47:51 +01:00

258 lines
9.8 KiB
C++

#ifndef MISSION_DEVICES_SOLARARRAYDEPLOYMENT_H_
#define MISSION_DEVICES_SOLARARRAYDEPLOYMENT_H_
#include <fsfw/globalfunctions/PeriodicOperationDivider.h>
#include <unordered_map>
#include "devices/powerSwitcherList.h"
#include "eive/definitions.h"
#include "events/subsystemIdRanges.h"
#include "fsfw/action/HasActionsIF.h"
#include "fsfw/devicehandlers/CookieIF.h"
#include "fsfw/devicehandlers/DeviceHandlerIF.h"
#include "fsfw/objectmanager/SystemObject.h"
#include "fsfw/power/PowerSwitchIF.h"
#include "fsfw/returnvalues/returnvalue.h"
#include "fsfw/serialize/SerialLinkedListAdapter.h"
#include "fsfw/tasks/ExecutableObjectIF.h"
#include "fsfw/timemanager/Countdown.h"
#include "fsfw_hal/common/gpio/GpioIF.h"
#include "mission/memory/SdCardMountedIF.h"
#include "mission/trace.h"
#include "returnvalues/classIds.h"
enum DeploymentChannels : uint8_t { SA_1 = 1, SA_2 = 2 };
class ManualDeploymentCommand : public SerialLinkedListAdapter<SerializeIF> {
public:
ManualDeploymentCommand() { setLinks(); }
void setLinks() {
setStart(&burnTimeSecs);
burnTimeSecs.setNext(&switchIntervalMs);
switchIntervalMs.setNext(&initChannel);
initChannel.setNext(&dryRun);
}
uint32_t getBurnTimeSecs() const { return burnTimeSecs.entry; }
uint32_t getSwitchIntervalMs() const { return switchIntervalMs.entry; };
uint8_t getInitChannel() const { return initChannel.entry; };
bool isDryRun() const { return dryRun.entry; }
private:
SerializeElement<uint32_t> burnTimeSecs;
SerializeElement<uint32_t> switchIntervalMs;
SerializeElement<uint8_t> initChannel;
SerializeElement<uint8_t> dryRun;
};
/**
* @brief This class is used to control the solar array deployment.
*
* @author J. Meier
*/
class SolarArrayDeploymentHandler : public ExecutableObjectIF,
public SystemObject,
public HasActionsIF {
public:
//! Manual deployment of the solar arrays. Burn time, channel switch interval, initial
//! burn channel and dry run flag are supplied as parameters. There are following cases to
//! consider.
//!
//! - Channel switch interval greater or equal to burn time: Only burn one channel. The init
//! burn channel parameter can be used to select which channel is burned.
//! - Channel switch interval half of burn time: Burn each channel for half of the burn time.
//!
//! The dry run flag can be used to avoid actually toggling IO pins and only test the
//! application logic.
static constexpr DeviceCommandId_t DEPLOY_SOLAR_ARRAYS_MANUALLY = 0x05;
static constexpr DeviceCommandId_t SWITCH_OFF_DEPLOYMENT = 0x06;
static constexpr uint32_t FIRST_BURN_START_TIME = config::SA_DEPL_INIT_BUFFER_SECS;
static constexpr uint32_t FIRST_BURN_END_TIME =
FIRST_BURN_START_TIME + config::SA_DEPL_BURN_TIME_SECS;
static constexpr uint32_t WAIT_START_TIME = FIRST_BURN_END_TIME;
static constexpr uint32_t WAIT_END_TIME = WAIT_START_TIME + config::SA_DEPL_WAIT_TIME_SECS;
static constexpr uint32_t SECOND_BURN_START_TIME = WAIT_END_TIME;
static constexpr uint32_t SECOND_BURN_END_TIME =
SECOND_BURN_START_TIME + config::SA_DEPL_WAIT_TIME_SECS;
static constexpr char SD_0_DEPL_FILE[] = "/mnt/sd0/conf/deployment";
static constexpr char SD_1_DEPL_FILE[] = "/mnt/sd1/conf/deployment";
static constexpr char SD_0_DEPLY_INFO[] = "/mnt/sd0/conf/deployment_info.txt";
static constexpr char SD_1_DEPLY_INFO[] = "/mnt/sd1/conf/deployment_info.txt";
static constexpr char PHASE_INIT_STR[] = "init";
static constexpr char PHASE_FIRST_BURN_STR[] = "first_burn";
static constexpr char PHASE_WAIT_STR[] = "wait";
static constexpr char PHASE_SECOND_BURN_STR[] = "second_burn";
static constexpr char PHASE_DONE[] = "done";
/**
* @brief constructor
*
* @param setObjectId The object id of the SolarArrayDeploymentHandler.
* @param gpioDriverId The id of the gpio com if.
* @param gpioCookie GpioCookie holding information about the gpios used to switch the
* transistors.
* @param mainLineSwitcherObjectId The object id of the object responsible for switching
* the 8V power source. This is normally the PCDU.
* @param mainLineSwitch The id of the main line switch. This is defined in
* powerSwitcherList.h.
* @param deplSA1 gpioId of the GPIO controlling the deployment 1 transistor.
* @param deplSA2 gpioId of the GPIO controlling the deployment 2 transistor.
* @param burnTimeMs Time duration the power will be applied to the burn wires.
*/
SolarArrayDeploymentHandler(object_id_t setObjectId, GpioIF& gpio,
PowerSwitchIF& mainLineSwitcher, power::Switches mainLineSwitch,
gpioId_t deplSA1, gpioId_t deplSA2, SdCardMountedIF& sdcMountedIF);
virtual ~SolarArrayDeploymentHandler();
virtual ReturnValue_t performOperation(uint8_t operationCode = 0) override;
virtual MessageQueueId_t getCommandQueue() const override;
virtual ReturnValue_t executeAction(ActionId_t actionId, MessageQueueId_t commandedBy,
const uint8_t* data, size_t size) override;
virtual ReturnValue_t initialize() override;
private:
enum AutonomousDeplState { INIT, FIRST_BURN, WAIT, SECOND_BURN, DONE };
enum StateMachine {
IDLE,
MAIN_POWER_ON,
MAIN_POWER_OFF,
WAIT_MAIN_POWER_ON,
WAIT_MAIN_POWER_OFF,
SWITCH_DEPL_GPIOS,
BURNING
};
struct FsmInfo {
// Not required anymore
// DeploymentChannels channel;
bool dryRun;
bool alternationDummy = false;
uint8_t initChannel = 0;
uint32_t burnCountdownMs = config::SA_DEPL_MAX_BURN_TIME;
};
static const uint8_t INTERFACE_ID = CLASS_ID::SA_DEPL_HANDLER;
static const ReturnValue_t COMMAND_NOT_SUPPORTED = MAKE_RETURN_CODE(0xA0);
static const ReturnValue_t DEPLOYMENT_ALREADY_EXECUTING = MAKE_RETURN_CODE(0xA1);
static const ReturnValue_t MAIN_SWITCH_TIMEOUT_FAILURE = MAKE_RETURN_CODE(0xA2);
static const ReturnValue_t SWITCHING_DEPL_SA1_FAILED = MAKE_RETURN_CODE(0xA3);
static const ReturnValue_t SWITCHING_DEPL_SA2_FAILED = MAKE_RETURN_CODE(0xA4);
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::SA_DEPL_HANDLER;
//! [EXPORT] : [COMMENT] P1: Burn duration in milliseconds, P2: Dry run flag
static constexpr Event BURN_PHASE_START = event::makeEvent(SUBSYSTEM_ID, 0, severity::INFO);
//! [EXPORT] : [COMMENT] P1: Burn duration in milliseconds, P2: Dry run flag
static constexpr Event BURN_PHASE_DONE = event::makeEvent(SUBSYSTEM_ID, 1, severity::INFO);
static constexpr Event MAIN_SWITCH_ON_TIMEOUT = event::makeEvent(SUBSYSTEM_ID, 2, severity::LOW);
static constexpr Event MAIN_SWITCH_OFF_TIMEOUT = event::makeEvent(SUBSYSTEM_ID, 3, severity::LOW);
static constexpr Event DEPL_SA1_GPIO_SWTICH_ON_FAILED =
event::makeEvent(SUBSYSTEM_ID, 4, severity::HIGH);
static constexpr Event DEPL_SA2_GPIO_SWTICH_ON_FAILED =
event::makeEvent(SUBSYSTEM_ID, 5, severity::HIGH);
static constexpr Event DEPL_SA1_GPIO_SWTICH_OFF_FAILED =
event::makeEvent(SUBSYSTEM_ID, 6, severity::HIGH);
static constexpr Event DEPL_SA2_GPIO_SWTICH_OFF_FAILED =
event::makeEvent(SUBSYSTEM_ID, 7, severity::HIGH);
static constexpr Event AUTONOMOUS_DEPLOYMENT_COMPLETED =
event::makeEvent(SUBSYSTEM_ID, 8, severity::INFO);
FsmInfo fsmInfo;
StateMachine stateMachine = IDLE;
bool actionActive = false;
bool firstAutonomousCycle = true;
ActionId_t activeCmd = HasActionsIF::INVALID_ACTION_ID;
std::optional<uint64_t> initUptime;
#if OBSW_THREAD_TRACING == 1
uint32_t opCounter = 0;
#endif
PeriodicOperationDivider opDivider = PeriodicOperationDivider(5);
uint8_t retryCounter = 3;
bool startFsmOn(uint32_t burnCountdownSecs, uint32_t channelAlternationIntervalMs,
uint8_t initChannel, bool dryRun);
void startFsmOff();
void finishFsm(ReturnValue_t resultForActionHelper);
ReturnValue_t performAutonomousDepl(sd::SdCard sdCard, bool dryRun);
bool dryRunStringInFile(const char* filename);
bool autonomousDeplForFile(sd::SdCard sdCard, const char* filename, bool dryRun);
/**
* This countdown is used to check if the PCDU sets the 8V line on in the intended time.
*/
Countdown mainSwitchCountdown;
/**
* This countdown is used to wait for the burn wire being successful cut.
*/
Countdown burnCountdown;
// Only initial value, new approach is to burn each channel half of the total burn time.
Countdown channelAlternationCd =
Countdown(config::LEGACY_SA_DEPL_CHANNEL_ALTERNATION_INTERVAL_SECS * 1000);
/**
* The message queue id of the component commanding an action will be stored in this variable.
* This is necessary to send later the action finish replies.
*/
MessageQueueId_t rememberCommanderId = 0;
/** Size of command queue */
size_t cmdQueueSize = 20;
GpioIF& gpioInterface;
gpioId_t deplSA1;
gpioId_t deplSA2;
/**
* After initialization this pointer will hold the reference to the main line switcher object.
*/
PowerSwitchIF& mainLineSwitcher;
/** Switch number of the 8V power switch */
uint8_t mainLineSwitch;
SdCardMountedIF& sdcMan;
ActionHelper actionHelper;
/** Queue to receive messages from other objects. */
MessageQueueIF* commandQueue = nullptr;
void readCommandQueue();
/**
* @brief This function performs actions dependent on the current state.
*/
void handleStateMachine();
/**
* @brief This function polls the 8V switch state and changes the state machine when the
* switch has been enabled.
*/
bool checkMainPowerOn();
bool checkMainPowerOff();
bool checkMainPower(bool onOff);
void allOff();
ReturnValue_t deploymentTransistorsOff();
ReturnValue_t saGpioAlternation();
ReturnValue_t sa1On();
ReturnValue_t sa1Off();
ReturnValue_t sa2On();
ReturnValue_t sa2Off();
};
#endif /* MISSION_DEVICES_SOLARARRAYDEPLOYMENT_H_ */