eive-obsw/mission/controller/ThermalController.h
Robin Mueller 7f74cca11f
All checks were successful
EIVE/eive-obsw/pipeline/pr-develop This commit looks good
add more mode support for heaters
2023-02-17 11:50:14 +01:00

214 lines
8.2 KiB
C++

#ifndef MISSION_CONTROLLER_THERMALCONTROLLER_H_
#define MISSION_CONTROLLER_THERMALCONTROLLER_H_
#include <fsfw/controller/ExtendedControllerBase.h>
#include <fsfw/devicehandlers/DeviceHandlerThermalSet.h>
#include <fsfw/timemanager/Countdown.h>
#include <mission/controller/controllerdefinitions/ThermalControllerDefinitions.h>
#include <mission/devices/devicedefinitions/Max31865Definitions.h>
#include <mission/devices/devicedefinitions/SusDefinitions.h>
#include <mission/devices/devicedefinitions/Tmp1075Definitions.h>
#include <list>
#include "mission/devices/HeaterHandler.h"
#include "mission/devices/devicedefinitions/GomspaceDefinitions.h"
#include "mission/trace.h"
/**
* NOP Limit: Hard limit for device, usually from datasheet. Device damage is possible lif NOP limit
* is exceeded.
* OP Limit: Soft limit. Device should be switched off or TCS controller should take action if the
* limit is exceeded to avoid reaching NOP limit
*/
struct TempLimits {
TempLimits(float nopLowerLimit, float opLowerLimit, float cutOffLimit, float opUpperLimit,
float nopUpperLimit)
: opLowerLimit(opLowerLimit),
opUpperLimit(opUpperLimit),
cutOffLimit(cutOffLimit),
nopLowerLimit(nopLowerLimit),
nopUpperLimit(nopUpperLimit) {}
float opLowerLimit;
float opUpperLimit;
float cutOffLimit;
float nopLowerLimit;
float nopUpperLimit;
};
class ThermalController : public ExtendedControllerBase {
public:
static const uint16_t INVALID_TEMPERATURE = 999;
static const uint8_t NUMBER_OF_SENSORS = 16;
ThermalController(object_id_t objectId, HeaterHandler& heater);
ReturnValue_t initialize() override;
protected:
void performThermalModuleCtrl();
ReturnValue_t handleCommandMessage(CommandMessage* message) override;
void performControlOperation() override;
ReturnValue_t initializeLocalDataPool(localpool::DataPool& localDataPoolMap,
LocalDataPoolManager& poolManager) override;
LocalPoolDataSetBase* getDataSetHandle(sid_t sid) override;
// Mode abstract functions
ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode,
uint32_t* msToReachTheMode) override;
private:
static const uint8_t SUBSYSTEM_ID = SUBSYSTEM_ID::TCS_CONTROLLER;
static constexpr Event NO_VALID_SENSOR_TEMPERATURE = MAKE_EVENT(0, severity::MEDIUM);
static constexpr Event NO_HEALTHY_HEATER_AVAILABLE = MAKE_EVENT(1, severity::MEDIUM);
static constexpr Event SYRLINKS_OVERHEATING = MAKE_EVENT(2, severity::HIGH);
static constexpr Event PLOC_OVERHEATING = MAKE_EVENT(3, severity::HIGH);
static constexpr Event OBC_OVERHEATING = MAKE_EVENT(4, severity::HIGH);
static constexpr Event HPA_OVERHEATING = MAKE_EVENT(5, severity::HIGH);
static constexpr Event PLPCDU_OVERHEATING = MAKE_EVENT(6, severity::HIGH);
static const uint32_t DELAY = 500;
static const uint32_t TEMP_OFFSET = 5;
enum class InternalState { STARTUP, INITIAL_DELAY, READY };
InternalState internalState = InternalState::STARTUP;
HeaterHandler& heaterHandler;
thermalControllerDefinitions::SensorTemperatures sensorTemperatures;
thermalControllerDefinitions::SusTemperatures susTemperatures;
thermalControllerDefinitions::DeviceTemperatures deviceTemperatures;
thermalControllerDefinitions::HeaterInfo heaterInfo;
lp_vec_t<int16_t, 9> currentVecPdu2 =
lp_vec_t<int16_t, 9>(gp_id_t(objects::PDU2_HANDLER, PDU::pool::PDU_CURRENTS));
DeviceHandlerThermalSet imtqThermalSet;
// Temperature Sensors
MAX31865::PrimarySet max31865Set0;
MAX31865::PrimarySet max31865Set1;
MAX31865::PrimarySet max31865Set2;
MAX31865::PrimarySet max31865Set3;
MAX31865::PrimarySet max31865Set4;
MAX31865::PrimarySet max31865Set5;
MAX31865::PrimarySet max31865Set6;
MAX31865::PrimarySet max31865Set7;
MAX31865::PrimarySet max31865Set8;
MAX31865::PrimarySet max31865Set9;
MAX31865::PrimarySet max31865Set10;
MAX31865::PrimarySet max31865Set11;
MAX31865::PrimarySet max31865Set12;
MAX31865::PrimarySet max31865Set13;
MAX31865::PrimarySet max31865Set14;
MAX31865::PrimarySet max31865Set15;
TMP1075::Tmp1075Dataset tmp1075SetTcs0;
TMP1075::Tmp1075Dataset tmp1075SetTcs1;
TMP1075::Tmp1075Dataset tmp1075SetPlPcdu0;
// damaged
// TMP1075::Tmp1075Dataset tmp1075SetPlPcdu1;
TMP1075::Tmp1075Dataset tmp1075SetIfBoard;
// SUS
SUS::SusDataset susSet0;
SUS::SusDataset susSet1;
SUS::SusDataset susSet2;
SUS::SusDataset susSet3;
SUS::SusDataset susSet4;
SUS::SusDataset susSet5;
SUS::SusDataset susSet6;
SUS::SusDataset susSet7;
SUS::SusDataset susSet8;
SUS::SusDataset susSet9;
SUS::SusDataset susSet10;
SUS::SusDataset susSet11;
// TempLimits
TempLimits acsBoardLimits = TempLimits(-40.0, -40.0, 80.0, 85.0, 85.0);
TempLimits mgtLimits = TempLimits(-40.0, -40.0, 65.0, 70.0, 70.0);
TempLimits rwLimits = TempLimits(-40.0, -40.0, 80.0, 85.0, 85.0);
TempLimits strLimits = TempLimits(-30.0, -20.0, 65.0, 70.0, 80.0);
TempLimits ifBoardLimits = TempLimits(-65.0, -40.0, 80.0, 85.0, 150.0);
TempLimits tcsBoardLimits = TempLimits(-60.0, -40.0, 80.0, 85.0, 130.0);
TempLimits obcLimits = TempLimits(-40.0, -40.0, 80.0, 85.0, 85.0);
TempLimits obcIfBoardLimits = TempLimits(-65.0, -40.0, 80.0, 85.0, 125.0);
TempLimits sBandTransceiverLimits = TempLimits(-40.0, -25.0, 35.0, 40.0, 65.0);
TempLimits pcduP60BoardLimits = TempLimits(-35.0, -35.0, 80.0, 85.0, 85.0);
TempLimits pcduAcuLimits = TempLimits(-35.0, -35.0, 80.0, 85.0, 85.0);
TempLimits pcduPduLimits = TempLimits(-35.0, -35.0, 80.0, 85.0, 85.0);
TempLimits plPcduBoardLimits = TempLimits(-55.0, -40.0, 80.0, 85.0, 125.0);
TempLimits plocMissionBoardLimits = TempLimits(-30.0, -10.0, 40.0, 45.0, 60);
TempLimits plocProcessingBoardLimits = TempLimits(-30.0, -10.0, 40.0, 45.0, 60.0);
TempLimits dacLimits = TempLimits(-65.0, -40.0, 113.0, 118.0, 150.0);
TempLimits cameraLimits = TempLimits(-40.0, -30.0, 60.0, 65.0, 85.0);
TempLimits droLimits = TempLimits(-40.0, -30.0, 75.0, 80.0, 90.0);
TempLimits x8Limits = TempLimits(-40.0, -30.0, -75.0, 80.0, 90.0);
TempLimits hpaLimits = TempLimits(-40.0, -30.0, -75.0, 80.0, 90.0);
TempLimits txLimits = TempLimits(-40.0, -30.0, -75.0, 80.0, 90.0);
TempLimits mpaLimits = TempLimits(-40.0, -30.0, -75.0, 80.0, 90.0);
TempLimits scexBoardLimits = TempLimits(-60.0, -40.0, 80.0, 85.0, 150.0);
double sensorTemp = INVALID_TEMPERATURE;
bool redSwitchNrInUse = false;
bool componentAboveCutOffLimit = false;
// Initial delay to make sure all pool variables have been initialized their owners
Countdown initialCountdown = Countdown(DELAY);
#if OBSW_THREAD_TRACING == 1
uint32_t opCounter = 0;
#endif
std::array<std::pair<bool, double>, 5> sensors;
uint8_t numSensors = 0;
PoolEntry<float> tmp1075Tcs0 = PoolEntry<float>({10.0});
PoolEntry<float> tmp1075Tcs1 = PoolEntry<float>({10.0});
PoolEntry<float> tmp1075PlPcdu0 = PoolEntry<float>({10.0});
PoolEntry<float> tmp1075PlPcdu1 = PoolEntry<float>({10.0});
PoolEntry<float> tmp1075IfBrd = PoolEntry<float>({10.0});
PoolEntry<uint8_t> heaterSwitchStates = PoolEntry<uint8_t>(heater::NUMBER_OF_SWITCHES);
PoolEntry<int16_t> heaterCurrent = PoolEntry<int16_t>();
static constexpr dur_millis_t MUTEX_TIMEOUT = 50;
void resetSensorsArray();
void copySensors();
void copySus();
void copyDevices();
void ctrlComponentTemperature(heater::Switchers switchNr, heater::Switchers redSwitchNr,
TempLimits& tempLimit);
void ctrlHeater(heater::Switchers switchNr, heater::Switchers redSwitchNr, TempLimits& tempLimit);
bool chooseHeater(heater::Switchers& switchNr, heater::Switchers redSwitchNr);
bool selectAndReadSensorTemp();
void ctrlAcsBoard();
void ctrlMgt();
void ctrlRw();
void ctrlStr();
void ctrlIfBoard();
void ctrlTcsBoard();
void ctrlObc();
void ctrlObcIfBoard();
void ctrlSBandTransceiver();
void ctrlPcduP60Board();
void ctrlPcduAcu();
void ctrlPcduPdu();
void ctrlPlPcduBoard();
void ctrlPlocMissionBoard();
void ctrlPlocProcessingBoard();
void ctrlDac();
void ctrlCameraBody();
void ctrlDro();
void ctrlX8();
void ctrlHpa();
void ctrlTx();
void ctrlMpa();
void ctrlScexBoard();
};
#endif /* MISSION_CONTROLLER_THERMALCONTROLLER_H_ */