eive-obsw/linux/fsfwconfig/objects/systemObjectList.h

78 lines
2.0 KiB
C++

#ifndef HOSTED_CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#define HOSTED_CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#include "commonObjects.h"
#include <fsfw/objectmanager/frameworkObjects.h>
#include <cstdint>
// The objects will be instantiated in the ID order
namespace objects {
enum sourceObjects: uint32_t {
/* 0x53 reserved for FSFW */
FW_ADDRESS_START = PUS_SERVICE_1_VERIFICATION,
FW_ADDRESS_END = TIME_STAMPER,
CCSDS_IP_CORE_BRIDGE = 0x50000500,
PUS_SERVICE_6 = 0x51000500,
TM_FUNNEL = 0x52000002,
/* 0x49 ('I') for Communication Interfaces **/
ARDUINO_COM_IF = 0x49000001,
CSP_COM_IF = 0x49000002,
I2C_COM_IF = 0x49000003,
UART_COM_IF = 0x49000004,
SPI_COM_IF = 0x49000005,
/* 0x47 ('G') for Gpio Interfaces */
GPIO_IF = 0x47000001,
/* Custom device handler */
PCDU_HANDLER = 0x44001000,
SOLAR_ARRAY_DEPL_HANDLER = 0x44001001,
SYRLINKS_HK_HANDLER = 0x44001002,
/* 0x54 ('T') for thermal objects */
HEATER_HANDLER = 0x54000003,
/**
* Not yet specified which pt1000 will measure which device/location in the satellite.
* Therefore object ids are named according to the IC naming of the RTDs in the schematic.
*/
RTD_IC3 = 0x54000004,
RTD_IC4 = 0x54000005,
RTD_IC5 = 0x54000006,
RTD_IC6 = 0x54000007,
RTD_IC7 = 0x54000008,
RTD_IC8 = 0x54000009,
RTD_IC9 = 0x5400000A,
RTD_IC10 = 0x5400000B,
RTD_IC11 = 0x5400000C,
RTD_IC12 = 0x5400000D,
RTD_IC13 = 0x5400000E,
RTD_IC14 = 0x5400000F,
RTD_IC15 = 0x5400001F,
RTD_IC16 = 0x5400002F,
RTD_IC17 = 0x5400003F,
RTD_IC18 = 0x5400004F,
RAD_SENSOR = 0x54000050,
RW1 = 0x54000051,
RW2 = 0x54000052,
RW3 = 0x54000053,
RW4 = 0x54000054,
/* 0x54 ('T') for test handlers */
TEST_TASK = 0x54694269,
LIBGPIOD_TEST = 0x54123456,
SPI_TEST = 0x54000010,
UART_TEST = 0x54000020,
DUMMY_INTERFACE = 0x5400CAFE,
DUMMY_HANDLER = 0x5400AFFE,
P60DOCK_TEST_TASK = 0x00005060
};
}
#endif /* BSP_CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_ */