eive-obsw/common/config/devices/powerSwitcherList.h

61 lines
1.9 KiB
C++

#ifndef FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#define FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#include "OBSWConfig.h"
#include <cstdint>
namespace pcduSwitches {
/* Switches are uint8_t datatype and go from 0 to 255 */
enum SwitcherList: uint8_t {
Q7S,
PAYLOAD_PCDU_CH1,
RW,
TCS_BOARD_8V_HEATER_IN,
SUS_REDUNDANT,
DEPLOYMENT_MECHANISM,
PAYLOAD_PCDU_CH6,
ACS_BOARD_SIDE_B,
PAYLOAD_CAMERA,
TCS_BOARD_3V3,
SYRLINKS,
STAR_TRACKER,
MGT,
SUS_NOMINAL,
SOLAR_CELL_EXP,
PLOC,
ACS_BOARD_SIDE_A,
NUMBER_OF_SWITCHES
};
static const uint8_t ON = 1;
static const uint8_t OFF = 0;
/* Output states after reboot of the PDUs */
static const uint8_t INIT_STATE_Q7S = ON;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH1 = OFF;
static const uint8_t INIT_STATE_RW = OFF;
#if BOARD_TE0720 == 1
/* Because the TE0720 is not connected to the PCDU, this switch is always on */
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = ON;
#else
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = OFF;
#endif
static const uint8_t INIT_STATE_SUS_REDUNDANT = OFF;
static const uint8_t INIT_STATE_DEPLOYMENT_MECHANISM = OFF;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH6 = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_B = OFF;
static const uint8_t INIT_STATE_PAYLOAD_CAMERA = OFF;
static const uint8_t INIT_STATE_TCS_BOARD_3V3 = OFF;
static const uint8_t INIT_STATE_SYRLINKS = OFF;
static const uint8_t INIT_STATE_STAR_TRACKER = OFF;
static const uint8_t INIT_STATE_MGT = OFF;
static const uint8_t INIT_STATE_SUS_NOMINAL = OFF;
static const uint8_t INIT_STATE_SOLAR_CELL_EXP = OFF;
static const uint8_t INIT_STATE_PLOC = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_A = OFF;
}
#endif /* FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_ */