eive-obsw/linux/boardtest/UartTestClass.cpp
Irini Kosmidou e2f0c0f1be
All checks were successful
EIVE/eive-obsw/pipeline/head This commit looks good
fram rec
2022-04-26 13:22:56 +02:00

360 lines
13 KiB
C++
Raw Blame History

#include "UartTestClass.h"
#include <errno.h> // Error integer and strerror() function
#include <fcntl.h> // Contains file controls like O_RDWR
#include <fsfw/tasks/TaskFactory.h>
#include <fsfw_hal/linux/uart/UartCookie.h>
#include <linux/devices/ScexDleParser.h>
#include <linux/devices/ScexHelper.h>
#include <linux/devices/ScexUartReader.h>
#include <unistd.h> // write(), read(), close()
#include "OBSWConfig.h"
#include "fsfw/globalfunctions/CRC.h"
#include "fsfw/globalfunctions/DleEncoder.h"
#include "fsfw/globalfunctions/arrayprinter.h"
#include "fsfw/serviceinterface.h"
#define GPS_REPLY_WIRETAPPING 0
#ifndef RPI_TEST_GPS_HANDLER
#define RPI_TEST_GPS_HANDLER 0
#endif
UartTestClass::UartTestClass(object_id_t objectId, ScexUartReader* reader)
: TestTask(objectId), reader(reader) {
mode = TestModes::SCEX;
scexMode = ScexModes::READER_TASK;
currCmd = scex::ScexCmds::FRAM;
if (scexMode == ScexModes::SIMPLE) {
auto encodingBuf = new std::array<uint8_t, 4096>;
DleParser::BufPair encodingBufPair{encodingBuf->data(), encodingBuf->size()};
auto decodedBuf = new std::array<uint8_t, 4096>;
DleParser::BufPair decodingBufPair{decodedBuf->data(), decodedBuf->size()};
dleParser = new ScexDleParser(*(new SimpleRingBuffer(4096, true)), dleEncoder, encodingBufPair,
decodingBufPair, &foundDlePacketHandler, this);
}
}
ReturnValue_t UartTestClass::initialize() {
if (mode == TestModes::GPS) {
gpsInit();
} else if (mode == TestModes::SCEX) {
scexInit();
}
return HasReturnvaluesIF::RETURN_OK;
}
ReturnValue_t UartTestClass::performOneShotAction() { return HasReturnvaluesIF::RETURN_OK; }
ReturnValue_t UartTestClass::performPeriodicAction() {
if (mode == TestModes::GPS) {
gpsPeriodic();
} else if (mode == TestModes::SCEX) {
scexPeriodic();
}
return HasReturnvaluesIF::RETURN_OK;
}
void UartTestClass::gpsInit() {
#if RPI_TEST_GPS_HANDLER == 1
int result = lwgps_init(&gpsData);
if (result == 0) {
sif::warning << "lwgps_init error: " << result << std::endl;
}
/* Get file descriptor */
serialPort = open("/dev/serial0", O_RDWR);
if (serialPort < 0) {
sif::warning << "open call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
}
/* Setting up UART parameters */
tty.c_cflag &= ~PARENB; // Clear parity bit
tty.c_cflag &= ~CSTOPB; // Clear stop field, only one stop bit used in communication
tty.c_cflag &= ~CSIZE; // Clear all the size bits
tty.c_cflag |= CS8; // 8 bits per byte
tty.c_cflag &= ~CRTSCTS; // Disable RTS/CTS hardware flow control
tty.c_cflag |= CREAD | CLOCAL; // Turn on READ & ignore ctrl lines (CLOCAL = 1)
// Use canonical mode for GPS device
tty.c_lflag |= ICANON;
tty.c_lflag &= ~ECHO; // Disable echo
tty.c_lflag &= ~ECHOE; // Disable erasure
tty.c_lflag &= ~ECHONL; // Disable new-line echo
tty.c_lflag &= ~ISIG; // Disable interpretation of INTR, QUIT and SUSP
tty.c_iflag &= ~(IXON | IXOFF | IXANY); // Turn off s/w flow ctrl
tty.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR |
ICRNL); // Disable any special handling of received bytes
tty.c_oflag &= ~OPOST; // Prevent special interpretation of output bytes (e.g. newline chars)
tty.c_oflag &= ~ONLCR; // Prevent conversion of newline to carriage return/line feed
// Non-blocking mode
tty.c_cc[VTIME] = 0;
tty.c_cc[VMIN] = 0;
cfsetispeed(&tty, B9600);
cfsetospeed(&tty, B9600);
if (tcsetattr(serialPort, TCSANOW, &tty) != 0) {
sif::warning << "tcsetattr call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
;
}
// Flush received and unread data. Those are old NMEA strings which are not relevant anymore
tcflush(serialPort, TCIFLUSH);
#endif
}
void UartTestClass::gpsPeriodic() {
#if RPI_TEST_GPS_HANDLER == 1
int bytesRead = 0;
do {
bytesRead = read(serialPort, reinterpret_cast<void*>(recBuf.data()),
static_cast<unsigned int>(recBuf.size()));
if (bytesRead < 0) {
sif::warning << "UartTestClass::performPeriodicAction: read call failed with error [" << errno
<< ", " << strerror(errno) << "]" << std::endl;
break;
} else if (bytesRead >= static_cast<int>(recBuf.size())) {
sif::debug << "UartTestClass::performPeriodicAction: "
"recv buffer might not be large enough"
<< std::endl;
} else if (bytesRead > 0) {
// pass data to lwgps for processing
#if GPS_REPLY_WIRETAPPING == 1
sif::info << recBuf.data() << std::endl;
#endif
int result = lwgps_process(&gpsData, recBuf.data(), bytesRead);
if (result == 0) {
sif::warning << "UartTestClass::performPeriodicAction: lwgps_process error" << std::endl;
}
recvCnt++;
if (recvCnt == 6) {
recvCnt = 0;
sif::info << "GPS Data" << std::endl;
// Print messages
printf("Valid status: %d\n", gpsData.is_valid);
printf("Latitude: %f degrees\n", gpsData.latitude);
printf("Longitude: %f degrees\n", gpsData.longitude);
printf("Altitude: %f meters\n", gpsData.altitude);
}
}
} while (bytesRead > 0);
#endif
}
void UartTestClass::scexInit() {
if (reader == nullptr) {
sif::warning << "UartTestClass::scexInit: Reader invalid" << std::endl;
return;
}
if (scexMode == ScexModes::SIMPLE) {
scexSimpleInit();
} else {
#if defined(RASPBERRY_PI)
std::string devname = "/dev/serial0";
#else
std::string devname = "/dev/ul-scex";
#endif
uartCookie = new UartCookie(this->getObjectId(), devname, UartBaudRate::RATE_57600, 4096);
reader->setDebugMode(true);
ReturnValue_t result = reader->initializeInterface(uartCookie);
if (result != HasReturnvaluesIF::RETURN_OK) {
sif::warning << "UartTestClass::gpsPeriodic: Initializing SCEX reader "
"UART IF failed"
<< std::endl;
}
}
}
void UartTestClass::scexPeriodic() {
using namespace std;
using namespace scex;
if (reader == nullptr) {
return;
}
if (scexMode == ScexModes::SIMPLE) {
scexSimplePeriodic();
} else {
if (not cmdSent) {
size_t len = 0;
prepareScexCmd(currCmd, false, cmdBuf.data(), &len);
reader->sendMessage(uartCookie, cmdBuf.data(), len);
cmdSent = true;
cmdDone = false;
}
if (cmdSent and not cmdDone) {
uint8_t* decodedPacket = nullptr;
size_t len = 0;
ReturnValue_t result = reader->readReceivedMessage(uartCookie, &decodedPacket, &len);
if (len > 0) {
ScexHelper helper;
const uint8_t* helperPtr = decodedPacket;
result = helper.deSerialize(&helperPtr, &len);
if (result == ScexHelper::INVALID_CRC) {
sif::warning << "CRC invalid" << std::endl;
}
sif::info << helper << endl;
//ping
//if ping cmd
if(helper.getCmd() == PING) {
ofstream out("/tmp/scex-ping.bin", ofstream::binary );
if (out.bad()) {
sif::warning << "bad" <<std::endl;
}
out << helper;
}
//fram
//packetcounter eins h<>her, wenn mehr packet verloren ->
//countdown (max 2min), wenn nicht if (helper.getPacketCounter() == helper.getTotalPacketCounter()) { nach 2min reader->finish();
if(helper.getCmd() == FRAM) {
if(helper.getPacketCounter() == 0) {
ofstream out("/tmp/scex-fram.bin", ofstream::binary ); // neues file anlegen wie oben ping
} else {
ofstream out("/tmp/scex-fram.bin", ofstream::binary | ofstream::app );// an bestehendes file hinzuf<75>gen
out << helper;
}
}
if (helper.getPacketCounter() == helper.getTotalPacketCounter()) {
reader->finish();
sif::info << "Reader is finished" << endl;
cmdDone = true;
if (helper.getCmd() == scex::ScexCmds::PING) {
cmdSent = false;
}
}
}
}
}
}
void UartTestClass::scexSimpleInit() {
#if defined(RASPBERRY_PI)
std::string devname = "/dev/serial0";
#else
std::string devname = "/dev/ul-scex";
#endif
/* Get file descriptor */
serialPort = open(devname.c_str(), O_RDWR);
if (serialPort < 0) {
sif::warning << "open call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
return;
}
// Setting up UART parameters
tty.c_cflag &= ~PARENB; // Clear parity bit
tty.c_cflag &= ~CSTOPB; // Clear stop field, only one stop bit used in communication
tty.c_cflag &= ~CSIZE; // Clear all the size bits
tty.c_cflag |= CS8; // 8 bits per byte
tty.c_cflag &= ~CRTSCTS; // Disable RTS/CTS hardware flow control
tty.c_cflag |= CREAD | CLOCAL; // Turn on READ & ignore ctrl lines (CLOCAL = 1)
// Use non-canonical mode and clear echo flag
tty.c_lflag &= ~(ICANON | ECHO);
// Non-blocking mode, read until either line is 0.1 second idle or maximum of 255 bytes are
// received in one go
tty.c_cc[VTIME] = 0; // In units of 0.1 seconds
tty.c_cc[VMIN] = 0; // Read up to 255 bytes
// Q7S UART Lite has fixed baud rate. For other linux systems, set baud rate here.
#if !defined(XIPHOS_Q7S)
if (cfsetispeed(&tty, B57600) != 0) {
sif::warning << "UartTestClass::scexInit: Setting baud rate failed" << std::endl;
}
#endif
if (tcsetattr(serialPort, TCSANOW, &tty) != 0) {
sif::warning << "tcsetattr call failed with error [" << errno << ", " << strerror(errno)
<< std::endl;
}
// Flush received and unread data
tcflush(serialPort, TCIOFLUSH);
}
void UartTestClass::scexSimplePeriodic() {
using namespace scex;
ReturnValue_t result = RETURN_OK;
if (not cmdSent) {
// Flush received and unread data
tcflush(serialPort, TCIFLUSH);
uint8_t tmpCmdBuf[32] = {};
size_t len = 0;
sif::info << "UartTestClass::scexSimplePeriodic: Sending command to SCEX" << std::endl;
prepareScexCmd(currCmd, false, tmpCmdBuf, &len);
result = dleEncoder.encode(tmpCmdBuf, len, cmdBuf.data(), cmdBuf.size(), &encodedLen, true);
if (result != HasReturnvaluesIF::RETURN_OK) {
sif::warning << "UartTestClass::scexInit: Encoding failed" << std::endl;
return;
}
if (result != 0) {
return;
};
size_t bytesWritten = write(serialPort, cmdBuf.data(), encodedLen);
if (bytesWritten != encodedLen) {
sif::warning << "Sending command to solar experiment failed" << std::endl;
}
cmdSent = true;
cmdDone = false;
}
if (not cmdDone) {
// Read back reply immediately
int bytesRead = 0;
do {
bytesRead = read(serialPort, reinterpret_cast<void*>(recBuf.data()),
static_cast<unsigned int>(recBuf.size()));
if (bytesRead == 0) {
sif::warning << "Reading SCEX: Timeout or no bytes read" << std::endl;
} else if (bytesRead < 0) {
sif::warning << "UartTestClass::performPeriodicAction: read call failed with error ["
<< errno << ", " << strerror(errno) << "]" << std::endl;
break;
} else if (bytesRead >= static_cast<int>(recBuf.size())) {
sif::debug << "UartTestClass::performPeriodicAction: recv buffer might not be large enough"
<< std::endl;
} else if (bytesRead > 0) {
dleParser->passData(recBuf.data(), bytesRead);
if (currCmd == ScexCmds::PING) {
cmdDone = true;
cmdSent = false;
}
}
} while (bytesRead > 0);
}
}
int UartTestClass::prepareScexCmd(scex::ScexCmds cmd, bool tempCheck, uint8_t* cmdBuf,
size_t* len) {
using namespace scex;
// Send command
cmdBuf[0] = scex::createCmdByte(cmd, false);
// These two fields are the packet counter and the total packet count. Those are 1 and 1 for each
// telecommand so far
cmdBuf[1] = 1;
cmdBuf[2] = 1;
uint16_t userDataLen = 0;
cmdBuf[3] = (userDataLen >> 8) & 0xff;
cmdBuf[4] = userDataLen & 0xff;
uint16_t crc = CRC::crc16ccitt(cmdBuf, 5);
cmdBuf[5] = (crc >> 8) & 0xff;
cmdBuf[6] = crc & 0xff;
*len = 7;
return 0;
}
void UartTestClass::foundDlePacketHandler(const DleParser::Context& ctx) {
UartTestClass* obj = reinterpret_cast<UartTestClass*>(ctx.userArgs);
if (ctx.getType() == DleParser::ContextType::PACKET_FOUND) {
obj->handleFoundDlePacket(ctx.decodedPacket.first, ctx.decodedPacket.second);
} else {
DleParser::defaultErrorHandler(ctx.error.first, ctx.error.second);
}
}
void UartTestClass::handleFoundDlePacket(uint8_t* packet, size_t len) {
sif::info << "Detected DLE encoded packet with decoded size " << len << std::endl;
}