eive-obsw/common/config/devices/powerSwitcherList.h
Robin Mueller ff0da65662
Some checks failed
EIVE/eive-obsw/pipeline/head There was a failure building this commit
started SUS assembly
fixes for PCDU code and switcher list handling
2022-03-03 15:37:36 +01:00

65 lines
1.9 KiB
C++

#ifndef FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#define FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_
#include "OBSWConfig.h"
#include <cstdint>
namespace pcduSwitches {
/* Switches are uint8_t datatype and go from 0 to 255 */
enum Switches: uint8_t {
PDU1_CH0_TCS_BOARD_3V3,
PDU1_CH1_SYRLINKS_12V,
PDU1_CH2_STAR_TRACKER_5V,
PDU1_CH3_MGT_5V,
PDU1_CH4_SUS_NOMINAL_3V3,
PDU1_CH5_SOLAR_CELL_EXP_5V,
PDU1_CH6_PLOC_12V,
PDU1_CH7_ACS_A_SIDE_3V3,
PDU1_CH8_UNOCCUPIED,
PDU2_CH0_Q7S,
PDU2_CH1_PL_PCDU_BATT_0_14V8,
PDU2_CH2_RW_5V,
PDU2_CH3_TCS_BOARD_HEATER_IN_8V,
PDU2_CH4_SUS_REDUNDANT_3V3,
PDU2_CH5_DEPLOYMENT_MECHANISM_8V,
PDU2_CH6_PL_PCDU_BATT_1_14V8,
PDU2_CH7_ACS_BOARD_SIDE_B_3V3,
PDU2_CH8_PAYLOAD_CAMERA,
NUMBER_OF_SWITCHES
};
static const uint8_t ON = 1;
static const uint8_t OFF = 0;
/* Output states after reboot of the PDUs */
#if BOARD_TE0720 == 1
/* Because the TE0720 is not connected to the PCDU, this switch is always on */
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = ON;
#else
static const uint8_t INIT_STATE_TCS_BOARD_8V_HEATER_IN = OFF;
#endif
static const uint8_t INIT_STATE_SYRLINKS = OFF;
static const uint8_t INIT_STATE_STAR_TRACKER = OFF;
static const uint8_t INIT_STATE_MGT = OFF;
static const uint8_t INIT_STATE_SUS_NOMINAL = OFF;
static const uint8_t INIT_STATE_SOLAR_CELL_EXP = OFF;
static const uint8_t INIT_STATE_PLOC = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_A = OFF;
static const uint8_t INIT_STATE_Q7S = ON;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH1 = OFF;
static const uint8_t INIT_STATE_RW = OFF;
static const uint8_t INIT_STATE_SUS_REDUNDANT = OFF;
static const uint8_t INIT_STATE_DEPLOYMENT_MECHANISM = OFF;
static const uint8_t INIT_STATE_PAYLOAD_PCDU_CH6 = OFF;
static const uint8_t INIT_STATE_ACS_BOARD_SIDE_B = OFF;
static const uint8_t INIT_STATE_PAYLOAD_CAMERA = OFF;
static const uint8_t INIT_STATE_TCS_BOARD_3V3 = OFF;
}
#endif /* FSFWCONFIG_DEVICES_POWERSWITCHERLIST_H_ */