add new commands to test new feature

eive_tmtc/tmtc/payload/plpcdu.py

@@ -44,21 +44,25 @@ class OpCode:
     NORMAL_TX = "nml_tx"
     NORMAL_MPA = "nml_mpa"
     NORMAL_HPA = "nml_hpa"
+    NORMAL_CUSTOM = "nml_custom"
 
     ENABLE_HK = "enable_hk"
     DISABLE_HK = "disable_hk"
     REQ_OS_HK = "hk_os"
 
+    DISABLE_ORDER_CHECKING = "disable_order_checking"
+    ENABLE_ORDER_CHECKING = "enable_order_checking"
+
     UPDATE_I_UPPER_LIMIT = "update_i_upper_limit"
     UPDATE_V_LOWER_LIMIT = "update_v_lower_limit"
     UPDATE_V_UPPER_LIMIT = "update_v_upper_limit"
 
-    INJECT_SSR_TO_DRO_FAILURE = ["10", "inject_ssr_dro_fault"]
+    INJECT_SSR_TO_DRO_FAILURE = "inject_ssr_dro_fault"
-    INJECT_DRO_TO_X8_FAILURE = ["11", "inject_dro_x8_fault"]
+    INJECT_DRO_TO_X8_FAILURE = "inject_dro_x8_fault"
-    INJECT_X8_TO_TX_FAILURE = ["12", "inject_x8_tx_fault"]
+    INJECT_X8_TO_TX_FAILURE = "inject_x8_tx_fault"
-    INJECT_TX_TO_MPA_FAILURE = ["13", "inject_tx_mpa_fault"]
+    INJECT_TX_TO_MPA_FAILURE = "inject_tx_mpa_fault"
-    INJECT_MPA_TO_HPA_FAILURE = ["14", "inject_mpa_hpa_fault"]
+    INJECT_MPA_TO_HPA_FAILURE = "inject_mpa_hpa_fault"
-    INJECT_ALL_ON_FAILURE = ["15", "inject_all_on_fault"]
+    INJECT_ALL_ON_FAILURE = "inject_all_on_fault"
 
 
 class Info:
@@ -71,6 +75,7 @@ class Info:
     NORMAL_TX = f"{NORMAL}, TX on"
     NORMAL_MPA = f"{NORMAL}, MPA on"
     NORMAL_HPA = f"{NORMAL}, HPA on"
+    NORMAL_CUSTOM = f"{NORMAL}, Custom Channel Settings"
     REQ_OS_HK = "Request One Shot HK"
     SWITCH_HPA_ON_PROC = "Switch HPA on procedure"
     ENABLE_HK = "Enable HK"
@@ -78,6 +83,8 @@ class Info:
     UPDATE_I_UPPER_LIMIT = "Update upper current parameter"
     UPDATE_V_LOWER_LIMIT = "Update lower voltage parameter"
     UPDATE_V_UPPER_LIMIT = "Update upper voltage parameter"
+    DISABLE_ORDER_CHECKING = "Disable order checks"
+    ENABLE_ORDER_CHECKING = "Enable order checks"
 
 
 class SetId(enum.IntEnum):
@@ -164,6 +171,8 @@ class ParamId(enum.IntEnum):
     INJECT_MPA_TO_HPA_FAILURE = 34
     INJECT_ALL_ON_FAILURE = 35
 
+    DISABLE_ORDER_CHECK_CHANNELS = 40
+
 
 class DevSelect(enum.IntEnum):
     SSR_NEG_V = 0
@@ -186,6 +195,7 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.NORMAL_TX, info=Info.NORMAL_TX)
     oce.add(keys=OpCode.NORMAL_MPA, info=Info.NORMAL_MPA)
     oce.add(keys=OpCode.NORMAL_HPA, info=Info.NORMAL_HPA)
+    oce.add(keys=OpCode.NORMAL_CUSTOM, info=Info.NORMAL_CUSTOM)
     oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
     oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
     oce.add(keys=OpCode.UPDATE_V_LOWER_LIMIT, info=Info.UPDATE_V_LOWER_LIMIT)
@@ -212,6 +222,8 @@ def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
         info="Inject failure in MPA to HPA transition",
     )
     oce.add(keys=OpCode.INJECT_ALL_ON_FAILURE, info="Inject failure in all on mode")
+    oce.add(keys=OpCode.DISABLE_ORDER_CHECKING, info=Info.DISABLE_ORDER_CHECKING)
+    oce.add(keys=OpCode.ENABLE_ORDER_CHECKING, info=Info.ENABLE_ORDER_CHECKING)
     defs.add_service(CustomServiceList.PL_PCDU.value, "PL PCDU", oce)
 
 
@@ -282,6 +294,14 @@ def pack_pl_pcdu_commands(  # noqa C901: Complexity is okay here.
             mode=Mode.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON),
         )
+
+    if op_code == OpCode.NORMAL_CUSTOM:
+        pack_pl_pcdu_mode_cmd(
+            q=q,
+            info=Info.NORMAL_CUSTOM,
+            mode=Mode.NORMAL,
+            submode=prompt_custom_normal_submode(),
+        )
     if op_code == OpCode.REQ_OS_HK:
         q.add_log_cmd(f"PL PCDU: {Info.REQ_OS_HK}")
         q.add_pus_tc(
@@ -289,6 +309,26 @@ def pack_pl_pcdu_commands(  # noqa C901: Complexity is okay here.
                 sid=make_sid(object_id=PL_PCDU_ID, set_id=SetId.ADC)
             )
         )
+    if op_code == OpCode.DISABLE_ORDER_CHECKING:
+        q.add_log_cmd(Info.DISABLE_ORDER_CHECKING)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_boolean_parameter(
+                    PL_PCDU_ID, 0, ParamId.DISABLE_ORDER_CHECK_CHANNELS, False
+                )
+            )
+        )
+
+    if op_code == OpCode.ENABLE_ORDER_CHECKING:
+        q.add_log_cmd(Info.ENABLE_ORDER_CHECKING)
+        q.add_pus_tc(
+            create_load_param_cmd(
+                create_scalar_boolean_parameter(
+                    PL_PCDU_ID, 0, ParamId.DISABLE_ORDER_CHECK_CHANNELS, True
+                )
+            )
+        )
+
     if op_code == OpCode.UPDATE_I_UPPER_LIMIT:
         q.add_log_cmd(Info.UPDATE_I_UPPER_LIMIT)
         print("Select device to update lower current limit for: ")
@@ -635,3 +675,30 @@ def dev_select_to_upper_u_update_param_id(dev_select: DevSelect) -> ParamId:
     if param_id is None:
         raise ValueError("invalid parameter ID")
     return param_id
+
+
+def prompt_custom_normal_submode() -> int:
+    print("Prompting custom submode.")
+    submode = 0
+
+    def prompt_channel(submode: int, channel_str: str, mask: NormalSubmodesMask) -> int:
+        while True:
+            channel_on = input(f" {channel_str} ON? [y/n]: ")
+            if channel_on in ["y", "1", "yes"]:
+                submode |= 1 << mask
+            elif channel_on in ["n", "0", "no"]:
+                break
+            else:
+                _LOGGER.warning("invalid input, try again")
+                continue
+        return submode
+
+    submode = prompt_channel(
+        submode, "SSR", NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
+    )
+    submode = prompt_channel(submode, "DRO", NormalSubmodesMask.DRO_ON)
+    submode = prompt_channel(submode, "TX", NormalSubmodesMask.TX_ON)
+    submode = prompt_channel(submode, "X8", NormalSubmodesMask.X8_ON)
+    submode = prompt_channel(submode, "MPA", NormalSubmodesMask.MPA_ON)
+    submode = prompt_channel(submode, "HPA", NormalSubmodesMask.HPA_ON)
+    return submode