Merge branch 'develop' into mueller/rtd-cmds

CHANGELOG.md

@@ -10,6 +10,18 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
+# [v1.12.0]
+
+- Add Rad Sensor HK parsing
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/81
+- Add procedures, parser functions and general application functionalities
+  for the thermal-vacuum test. This includes daemon functionality to poll
+  all Telemetry even when there is no operator present
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/76
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/74
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/79
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/73
+
 # [v1.11.0]
 
 - Add `setup.cfg` and `setup.py` file, allowing package installation

pus_tc/cmd_definitions.py

@@ -1,4 +1,5 @@
 from pus_tc.devs.gps import GpsOpCodes
+from pus_tc.devs.rad_sensor import add_rad_sens_cmds
 from tmtccmd.config import (
     add_op_code_entry,
     add_service_op_code_entry,
@@ -777,20 +778,6 @@ def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
     cmd_dict[CustomServiceList.IMTQ.value] = service_imtq_tuple
 
 
-def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
-    op_code_dict_srv_rad_sensor = {
-        "0": ("Radiation Sensor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("Radiation Sensor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Radiation Sensor: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Radiation Sensor: Start conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Radiation Sensor: Read conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Radiation Sensor: Enable debug output", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "6": ("Radiation Sensor: Disable debug putput", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_rad_sensor_tuple = ("Radiation Sensor", op_code_dict_srv_rad_sensor)
-    cmd_dict[CustomServiceList.RAD_SENSOR.value] = service_rad_sensor_tuple
-
-
 def add_ploc_mpsoc_cmds(cmd_dict: ServiceOpCodeDictT):
     op_code_dict_srv_ploc_mpsoc = {
         "0": ("Ploc MPSoC: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),

pus_tc/devs/rad_sensor.py

@@ -7,11 +7,37 @@
 """
 import struct
 
-from tmtccmd.config.definitions import QueueCommands
+from config.definitions import CustomServiceList
+from tmtccmd.config import add_op_code_entry, add_service_op_code_entry
+from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT, OpCodeDictKeys
 
 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
 from pus_tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_3_fsfw_hk import generate_one_hk_command, make_sid
+from tmtccmd.utility import ObjectId
+
+
+class SetIds:
+    HK = 3
+
+
+class OpCodes:
+    ON = ["0", "on"]
+    NORMAL = ["1", "normal"]
+    OFF = ["2", "off"]
+    REQ_HK_ONCE = ["3", "hk-os"]
+    DEBUG_ON = ["10", "dbg-on"]
+    DEBUG_OFF = ["11", "dbg-off"]
+
+
+class Info:
+    ON = "Switch Rad Sensor on"
+    NORMAL = "Switch Rad Sensor normal"
+    OFF = "Switch Rad sensor off"
+    REQ_OS_HK = "Request one-shot HK"
+    DEBUG_ON = "Switch debug output on"
+    DEBUG_OFF = "Switch debug output off"
 
 
 class CommandIds:
@@ -21,52 +47,64 @@ class CommandIds:
     DISABLE_DEBUG_OUTPUT = 5
 
 
-def pack_rad_sensor_test_into(object_id: bytearray, tc_queue: TcQueueT, op_code: str):
+def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
-    tc_queue.appendleft(
+
-        (
+    op_code_dict = dict()
-            QueueCommands.PRINT,
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.ON, keys=OpCodes.ON)
-            "Testing radiation sensor handler with object id: 0x" + object_id.hex(),
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.OFF, keys=OpCodes.OFF)
-        )
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.NORMAL, keys=OpCodes.NORMAL)
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.REQ_OS_HK, keys=OpCodes.REQ_HK_ONCE
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.DEBUG_ON, keys=OpCodes.DEBUG_ON
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.DEBUG_OFF, keys=OpCodes.DEBUG_OFF
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.RAD_SENSOR.value,
+        info="Radiation Sensor",
+        op_code_entry=op_code_dict,
     )
 
-    if op_code == "0":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode on"))
-        mode_data = pack_mode_data(object_id, Modes.ON, 0)
-        command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
-        tc_queue.appendleft(command.pack_command_tuple())
 
-    if op_code == "1":
+def pack_rad_sensor_test_into(object_id: ObjectId, tc_queue: TcQueueT, op_code: str):
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode normal"))
+    tc_queue.appendleft(
-        mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
+        (QueueCommands.PRINT, f"Commanding Radiation sensor handler {object_id}")
-        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
+    )
-        tc_queue.appendleft(command.pack_command_tuple())
 
-    if op_code == "2":
+    if op_code in OpCodes.ON:
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode off"))
+        rad_sensor_mode_cmd(object_id, Modes.ON, Info.ON, tc_queue)
-        mode_data = pack_mode_data(object_id, Modes.OFF, 0)
+    if op_code in OpCodes.NORMAL:
-        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
+        rad_sensor_mode_cmd(object_id, Modes.NORMAL, Info.NORMAL, tc_queue)
+    if op_code in OpCodes.OFF:
+        rad_sensor_mode_cmd(object_id, Modes.OFF, Info.OFF, tc_queue)
+    if op_code in OpCodes.REQ_HK_ONCE:
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.REQ_OS_HK}"))
+        cmd = generate_one_hk_command(
+            sid=make_sid(object_id.as_bytes, set_id=SetIds.HK), ssc=0
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodes.DEBUG_ON:
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_ON}"))
+        command = object_id.as_bytes + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
+        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
-
+    if op_code in OpCodes.DEBUG_OFF:
-    if op_code == "3":
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_OFF}"))
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Start  conversions"))
+        command = object_id.as_bytes + struct.pack(
-        command = object_id + struct.pack("!I", CommandIds.START_CONVERSIONS)
+            "!I", CommandIds.DISABLE_DEBUG_OUTPUT
-        command = PusTelecommand(service=8, subservice=128, ssc=43, app_data=command)
+        )
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "4":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Read  conversions"))
-        command = object_id + struct.pack("!I", CommandIds.READ_CONVERSIONS)
-        command = PusTelecommand(service=8, subservice=128, ssc=44, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "5":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Enable debug output"))
-        command = object_id + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
         command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
 
-    if op_code == "6":
+
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Disable debug output"))
+def rad_sensor_mode_cmd(
-        command = object_id + struct.pack("!I", CommandIds.DISABLE_DEBUG_OUTPUT)
+    object_id: ObjectId, mode: Modes, info: str, tc_queue: TcQueueT
-        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
+):
-        tc_queue.appendleft(command.pack_command_tuple())
+    tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {info}"))
+    mode_data = pack_mode_data(object_id.as_bytes, mode, 0)
+    command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
+    tc_queue.appendleft(command.pack_command_tuple())

pus_tc/prompt_parameters.py

@@ -1,5 +1,11 @@
 from PyQt5.QtWidgets import (
-    QDialog, QDialogButtonBox, QVBoxLayout, QLabel, QGroupBox, QGridLayout, QLineEdit
+    QDialog,
+    QDialogButtonBox,
+    QVBoxLayout,
+    QLabel,
+    QGroupBox,
+    QGridLayout,
+    QLineEdit,
 )
 
 from PyQt5 import QtCore
@@ -22,6 +28,7 @@ class Parameter:
         self.widget.setPlaceholderText(self.defaultValue)
         self.widget.setText("")
 
+
 class ParameterDialog(QDialog):
     def __init__(self):
         super().__init__()
@@ -59,7 +66,6 @@ class ParameterDialog(QDialog):
 
         self.parameters[name] = parameter
 
-
     def _reset(self):
         for value in self.parameters.values():
             value.reset()
@@ -80,14 +86,13 @@ class ParameterDialog(QDialog):
         super().reject()
 
 
-
-
-
 """Prompt the user to specify additional Parameters
 
     :param parameterList:   array of dictionaries with name and defaultValue attributes
     :return:                dict with all names as key and user supplied input as value string
     """
+
+
 def prompt_parameters(parameterList):
     gui = get_global(CoreGlobalIds.GUI)
     mode = get_global(CoreGlobalIds.MODE)
@@ -98,6 +103,7 @@ def prompt_parameters(parameterList):
     else:
         return _cli_prompt(parameterList)
 
+
 def _gui_prompt(parameterList):
     dialog = ParameterDialog()
     for parameter in parameterList:
@@ -105,10 +111,13 @@ def _gui_prompt(parameterList):
     dialog.exec_()
     return dialog.getParameters()
 
+
 def _cli_prompt(parameterList):
     result = {}
     for parameter in parameterList:
-        userInput = input("Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"]))
+        userInput = input(
+            "Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"])
+        )
         if userInput == "":
             userInput = parameter["defaultValue"]
         result[parameter["name"]] = userInput

pus_tc/system/controllers.py

@@ -18,8 +18,12 @@ class Info:
 
 
 def pack_controller_commands(tc_queue: TcQueueT, op_code: str):
-    parameters = prompt_parameters([{"name": "Mode", "defaultValue": "2"}, {
+    parameters = prompt_parameters(
-                                   "name": "Submode", "defaultValue": "0"}])
+        [
+            {"name": "Mode", "defaultValue": "2"},
+            {"name": "Submode", "defaultValue": "0"},
+        ]
+    )
     mode = int(parameters["Mode"])
     if mode < 0 or mode > 2:
         print("Invalid Mode, defaulting to OFF")

pus_tc/tc_packer_hook.py

@@ -70,6 +70,7 @@ from config.object_ids import (
     SYRLINKS_HANDLER_ID,
     SOLAR_ARRAY_DEPLOYMENT_ID,
     RW_ASSEMBLY,
+    get_object_ids,
 )
 
 
@@ -99,6 +100,7 @@ def pre_tc_send_cb(
 def pack_service_queue_user(
     service: Union[str, int], op_code: str, service_queue: TcQueueT
 ):
+    obj_id_man = get_object_ids()
     if service == CoreServiceList.SERVICE_5.value:
         return pack_generic_service5_test_into(tc_queue=service_queue)
     if service == CoreServiceList.SERVICE_17.value:
@@ -173,7 +175,7 @@ def pack_service_queue_user(
             object_id=RW4_ID, rw_idx=4, tc_queue=service_queue, op_code=op_code
         )
     if service == CustomServiceList.RAD_SENSOR.value:
-        object_id = RAD_SENSOR_ID
+        object_id = obj_id_man.get(RAD_SENSOR_ID)
         return pack_rad_sensor_test_into(
             object_id=object_id, tc_queue=service_queue, op_code=op_code
         )

pus_tm/devs/rad_sensor.py

@@ -0,0 +1,24 @@
+import struct
+
+from pus_tm.defs import PrintWrapper
+from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
+from pus_tc.devs.rad_sensor import SetIds
+
+
+def handle_rad_sensor_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
+    if set_id == SetIds.HK:
+        pw = PrintWrapper(printer)
+        current_idx = 0
+        pw.dlog("Received Radiation Sensor HK data")
+        fmt_str = "!fHHHHHH"
+        inc_len = struct.calcsize(fmt_str)
+        (temp, ain0, ain1, ain4, ain5, ain6, ain7) = struct.unpack(
+            fmt_str, hk_data[current_idx : current_idx + inc_len]
+        )
+        ain_dict = {0: ain0, 1: ain1, 4: ain4, 5: ain5, 6: ain6, 7: ain7}
+        pw.dlog(f"Temperature: {temp} C")
+        pw.dlog(f"AIN Channel | Raw Value (hex) | Raw Value (dec)")
+        for idx, val in ain_dict.items():
+            pw.dlog(f"{idx} | {val:#06x} | {str(val).ljust(5)}")
+        current_idx += inc_len
+        printer.print_validity_buffer(validity_buffer=hk_data[current_idx:], num_vars=7)

pus_tm/hk_handling.py

@@ -1,6 +1,7 @@
 """HK Handling for EIVE OBSW"""
 import struct
 
+from pus_tm.devs.rad_sensor import handle_rad_sensor_data
 from pus_tm.system.tcs import handle_thermal_controller_hk_data, TM_TCP_SERVER
 from tmtccmd.config.definitions import HkReplyUnpacked
 from tmtccmd.tm.pus_3_fsfw_hk import (
@@ -92,6 +93,8 @@ def handle_regular_hk_print(
         return handle_pdu_data(
             printer=printer, pdu_idx=2, set_id=set_id, hk_data=hk_data
         )
+    if objb == obj_ids.RAD_SENSOR_ID:
+        return handle_rad_sensor_data(printer=printer, hk_data=hk_data, set_id=set_id)
     if objb in [obj_ids.RW1_ID, obj_ids.RW2_ID, obj_ids.RW3_ID, obj_ids.RW4_ID]:
         return handle_rw_hk_data(
             printer=printer, object_id=object_id, set_id=set_id, hk_data=hk_data

tmtcgui.py

@@ -2,10 +2,11 @@
 """TMTC commander for EIVE"""
 from tmtcc import tmtcc_post_args, tmtcc_pre_args
 from tmtccmd.config.args import (
-        create_default_args_parser,
+    create_default_args_parser,
-        add_gui_tmtccmd_args,
+    add_gui_tmtccmd_args,
-        parse_gui_input_arguments,
+    parse_gui_input_arguments,
-    )
+)
+
 
 def main():
     hook_obj = tmtcc_pre_args()