supervisor commands
This commit is contained in:
Jakob Meier
parent
ec8526314d
commit
9561dd2f14
@ -1,181 +1,177 @@
|
||||
2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2203;0x089b;STORE_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2205;0x089d;STORING_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2211;0x08a3;INIT_DONE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2212;0x08a4;DUMP_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2213;0x08a5;DELETION_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2214;0x08a6;DELETION_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
|
||||
2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
|
||||
2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
|
||||
2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
|
||||
4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
|
||||
4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw/src/fsfw/power/PowerSwitchIF.h
|
||||
5000;0x1388;HEATER_ON;INFO;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5001;0x1389;HEATER_OFF;INFO;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw/src/fsfw/thermal/Heater.h
|
||||
5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
|
||||
5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
|
||||
7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
|
||||
7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
|
||||
7400;0x1ce8;CHANGING_MODE;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7401;0x1ce9;MODE_INFO;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
|
||||
7506;0x1d52;HEALTH_INFO;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
|
||||
7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
|
||||
8900;0x22c4;CLOCK_SET;INFO;;fsfw/src/fsfw/pus/Service9TimeManagement.h
|
||||
8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw/src/fsfw/pus/Service9TimeManagement.h
|
||||
9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
|
||||
10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
|
||||
10800;0x2a30;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10801;0x2a31;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10802;0x2a32;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
|
||||
10900;0x2a94;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
|
||||
10901;0x2a95;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
|
||||
10902;0x2a96;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
|
||||
10903;0x2a97;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
|
||||
10904;0x2a98;MAIN_SWITCH_TIMEOUT;LOW;;mission/devices/HeaterHandler.h
|
||||
11000;0x2af8;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11001;0x2af9;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11002;0x2afa;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11003;0x2afb;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11004;0x2afc;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
|
||||
11101;0x2b5d;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
|
||||
11102;0x2b5e;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
|
||||
11103;0x2b5f;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
|
||||
11104;0x2b60;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
|
||||
11105;0x2b61;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
|
||||
11201;0x2bc1;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11202;0x2bc2;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11203;0x2bc3;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11204;0x2bc4;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11205;0x2bc5;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11206;0x2bc6;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11207;0x2bc7;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
|
||||
11208;0x2bc8;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
|
||||
11301;0x2c25;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/RwHandler.h
|
||||
11401;0x2c89;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
|
||||
11402;0x2c8a;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
|
||||
11501;0x2ced;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
|
||||
11502;0x2cee;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
|
||||
11503;0x2cef;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux/devices/ploc/PlocSupervisorHandler.h
|
||||
11504;0x2cf0;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
|
||||
11600;0x2d50;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
|
||||
11601;0x2d51;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
|
||||
11700;0x2db4;UPDATE_FILE_NOT_EXISTS;LOW;;linux/devices/ploc/PlocUpdater.h
|
||||
11701;0x2db5;ACTION_COMMANDING_FAILED;LOW;Failed to send command to supervisor handler P1: Return value of CommandActionHelper::commandAction P2: Action ID of command to send;linux/devices/ploc/PlocUpdater.h
|
||||
11702;0x2db6;UPDATE_AVAILABLE_FAILED;LOW;Supervisor handler replied action message indicating a command execution failure of the update available command;linux/devices/ploc/PlocUpdater.h
|
||||
11703;0x2db7;UPDATE_TRANSFER_FAILED;LOW;Supervisor handler failed to transfer an update space packet. P1: Parameter holds the number of update packets already sent (inclusive the failed packet);linux/devices/ploc/PlocUpdater.h
|
||||
11704;0x2db8;UPDATE_VERIFY_FAILED;LOW;Supervisor failed to execute the update verify command.;linux/devices/ploc/PlocUpdater.h
|
||||
11705;0x2db9;UPDATE_FINISHED;INFO;MPSoC update successful completed;linux/devices/ploc/PlocUpdater.h
|
||||
11800;0x2e18;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
|
||||
11801;0x2e19;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
|
||||
11802;0x2e1a;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
|
||||
11901;0x2e7d;INVALID_TC_FRAME;HIGH;;linux/obc/PdecHandler.h
|
||||
11902;0x2e7e;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/obc/PdecHandler.h
|
||||
11903;0x2e7f;CARRIER_LOCK;INFO;Carrier lock detected;linux/obc/PdecHandler.h
|
||||
11904;0x2e80;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/obc/PdecHandler.h
|
||||
12000;0x2ee0;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
|
||||
12001;0x2ee1;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
|
||||
12002;0x2ee2;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
|
||||
12003;0x2ee3;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
|
||||
12004;0x2ee4;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
|
||||
12005;0x2ee5;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
|
||||
12006;0x2ee6;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
|
||||
12007;0x2ee7;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
|
||||
12008;0x2ee8;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
|
||||
12009;0x2ee9;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
|
||||
12010;0x2eea;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
|
||||
12011;0x2eeb;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
|
||||
12012;0x2eec;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
|
||||
12013;0x2eed;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
|
||||
12014;0x2eee;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
|
||||
12015;0x2eef;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux/devices/startracker/StrHelper.h
|
||||
12016;0x2ef0;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
|
||||
12100;0x2f44;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12101;0x2f45;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12102;0x2f46;SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12103;0x2f47;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12104;0x2f48;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12105;0x2f49;MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12106;0x2f4a;MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12107;0x2f4b;ACK_FAILURE_REPORT;LOW;Received acknowledgement failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12108;0x2f4c;EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12109;0x2f4d;ACK_INVALID_APID;LOW;Expected acknowledgement report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12110;0x2f4e;EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12111;0x2f4f;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
|
||||
12200;0x2fa8;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
|
||||
12201;0x2fa9;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12202;0x2faa;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12203;0x2fab;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12204;0x2fac;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12205;0x2fad;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12206;0x2fae;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12207;0x2faf;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12208;0x2fb0;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12209;0x2fb1;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12210;0x2fb2;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12211;0x2fb3;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
|
||||
12300;0x300c;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
|
||||
12301;0x300d;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
|
||||
12302;0x300e;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
|
||||
12303;0x300f;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
|
||||
12400;0x3070;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
|
||||
12401;0x3071;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
|
||||
12402;0x3072;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
|
||||
12403;0x3073;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
|
||||
12500;0x30d4;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
|
||||
13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
|
||||
13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
|
||||
13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
|
||||
13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
|
||||
2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2203;0x089b;STORE_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2205;0x089d;STORING_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2211;0x08a3;INIT_DONE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2212;0x08a4;DUMP_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2213;0x08a5;DELETION_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2214;0x08a6;DELETION_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
|
||||
2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
|
||||
2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
|
||||
2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
|
||||
4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw\src\fsfw\power\Fuse.h
|
||||
4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw\src\fsfw\power\Fuse.h
|
||||
4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
|
||||
4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
|
||||
4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw\src\fsfw\power\PowerSwitchIF.h
|
||||
5000;0x1388;HEATER_ON;INFO;;fsfw\src\fsfw\thermal\Heater.h
|
||||
5001;0x1389;HEATER_OFF;INFO;;fsfw\src\fsfw\thermal\Heater.h
|
||||
5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw\src\fsfw\thermal\Heater.h
|
||||
5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw\src\fsfw\thermal\Heater.h
|
||||
5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw\src\fsfw\thermal\Heater.h
|
||||
5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
|
||||
5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
|
||||
5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
|
||||
5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
|
||||
5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
|
||||
5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
|
||||
5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
|
||||
5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
|
||||
7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
|
||||
7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
|
||||
7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
|
||||
7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
|
||||
7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
|
||||
7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
|
||||
7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
|
||||
7400;0x1ce8;CHANGING_MODE;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7401;0x1ce9;MODE_INFO;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
|
||||
7506;0x1d52;HEALTH_INFO;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
|
||||
7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
|
||||
7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
|
||||
7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
|
||||
7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
|
||||
7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
|
||||
8900;0x22c4;CLOCK_SET;INFO;;fsfw\src\fsfw\pus\Service9TimeManagement.h
|
||||
8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw\src\fsfw\pus\Service9TimeManagement.h
|
||||
9700;0x25e4;TEST;INFO;;fsfw\src\fsfw\pus\Service17Test.h
|
||||
10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw\hal\src\fsfw_hal\devicehandlers\MgmLIS3MDLHandler.h
|
||||
10800;0x2a30;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
|
||||
10801;0x2a31;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
|
||||
10802;0x2a32;SWITCHING_Q7S_DENIED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
|
||||
10900;0x2a94;GPIO_PULL_HIGH_FAILED;LOW;;mission\devices\HeaterHandler.h
|
||||
10901;0x2a95;GPIO_PULL_LOW_FAILED;LOW;;mission\devices\HeaterHandler.h
|
||||
10902;0x2a96;SWITCH_ALREADY_ON;LOW;;mission\devices\HeaterHandler.h
|
||||
10903;0x2a97;SWITCH_ALREADY_OFF;LOW;;mission\devices\HeaterHandler.h
|
||||
10904;0x2a98;MAIN_SWITCH_TIMEOUT;LOW;;mission\devices\HeaterHandler.h
|
||||
11000;0x2af8;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
|
||||
11001;0x2af9;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
|
||||
11002;0x2afa;DEPLOYMENT_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
|
||||
11003;0x2afb;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
|
||||
11004;0x2afc;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
|
||||
11101;0x2b5d;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11102;0x2b5e;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11103;0x2b5f;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11104;0x2b60;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11105;0x2b61;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11106;0x2b62;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux\devices\ploc\PlocMPSoCHandler.h
|
||||
11201;0x2bc1;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11202;0x2bc2;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11203;0x2bc3;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11204;0x2bc4;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11205;0x2bc5;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11206;0x2bc6;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11207;0x2bc7;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
|
||||
11208;0x2bc8;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission\devices\IMTQHandler.h
|
||||
11301;0x2c25;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission\devices\RwHandler.h
|
||||
11401;0x2c89;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux\devices\startracker\StarTrackerHandler.h
|
||||
11402;0x2c8a;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux\devices\startracker\StarTrackerHandler.h
|
||||
11501;0x2ced;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux\devices\ploc\PlocSupervisorHandler.h
|
||||
11502;0x2cee;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux\devices\ploc\PlocSupervisorHandler.h
|
||||
11503;0x2cef;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux\devices\ploc\PlocSupervisorHandler.h
|
||||
11504;0x2cf0;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux\devices\ploc\PlocSupervisorHandler.h
|
||||
11505;0x2cf1;SUPV_HELPER_EXECUTING;LOW;Supervisor helper currently executing a command;linux\devices\ploc\PlocSupervisorHandler.h
|
||||
11600;0x2d50;SANITIZATION_FAILED;LOW;;bsp_q7s\memory\SdCardManager.h
|
||||
11601;0x2d51;MOUNTED_SD_CARD;INFO;;bsp_q7s\memory\SdCardManager.h
|
||||
11800;0x2e18;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux\devices\ploc\PlocMemoryDumper.h
|
||||
11801;0x2e19;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux\devices\ploc\PlocMemoryDumper.h
|
||||
11802;0x2e1a;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux\devices\ploc\PlocMemoryDumper.h
|
||||
11901;0x2e7d;INVALID_TC_FRAME;HIGH;;linux\obc\PdecHandler.h
|
||||
11902;0x2e7e;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux\obc\PdecHandler.h
|
||||
11903;0x2e7f;CARRIER_LOCK;INFO;Carrier lock detected;linux\obc\PdecHandler.h
|
||||
11904;0x2e80;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux\obc\PdecHandler.h
|
||||
12000;0x2ee0;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux\devices\startracker\StrHelper.h
|
||||
12001;0x2ee1;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux\devices\startracker\StrHelper.h
|
||||
12002;0x2ee2;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux\devices\startracker\StrHelper.h
|
||||
12003;0x2ee3;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux\devices\startracker\StrHelper.h
|
||||
12004;0x2ee4;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux\devices\startracker\StrHelper.h
|
||||
12005;0x2ee5;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux\devices\startracker\StrHelper.h
|
||||
12006;0x2ee6;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux\devices\startracker\StrHelper.h
|
||||
12007;0x2ee7;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux\devices\startracker\StrHelper.h
|
||||
12008;0x2ee8;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux\devices\startracker\StrHelper.h
|
||||
12009;0x2ee9;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
|
||||
12010;0x2eea;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
|
||||
12011;0x2eeb;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux\devices\startracker\StrHelper.h
|
||||
12012;0x2eec;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux\devices\startracker\StrHelper.h
|
||||
12013;0x2eed;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux\devices\startracker\StrHelper.h
|
||||
12014;0x2eee;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux\devices\startracker\StrHelper.h
|
||||
12015;0x2eef;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux\devices\startracker\StrHelper.h
|
||||
12016;0x2ef0;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux\devices\startracker\StrHelper.h
|
||||
12100;0x2f44;SUPV_UPDATE_FAILED;LOW;update failed;linux\devices\ploc\PlocSupvHelper.h
|
||||
12101;0x2f45;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux\devices\ploc\PlocSupvHelper.h
|
||||
12102;0x2f46;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux\devices\ploc\PlocSupvHelper.h
|
||||
12103;0x2f47;SUPV_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocSupvHelper.h
|
||||
12104;0x2f48;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12105;0x2f49;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12106;0x2f4a;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12107;0x2f4b;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12108;0x2f4c;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12109;0x2f4d;SUPV_EXE_FAILURE_REPORT;LOW;Supervisor received execution failure report P1: Internal state of supervisor;linux\devices\ploc\PlocSupvHelper.h
|
||||
12110;0x2f4e;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12111;0x2f4f;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
|
||||
12200;0x2fa8;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission\devices\PayloadPcduHandler.h
|
||||
12201;0x2fa9;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12202;0x2faa;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12203;0x2fab;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12204;0x2fac;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12205;0x2fad;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12206;0x2fae;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12207;0x2faf;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12208;0x2fb0;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12209;0x2fb1;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12210;0x2fb2;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12211;0x2fb3;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
|
||||
12300;0x300c;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\AcsBoardAssembly.h
|
||||
12301;0x300d;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\AcsBoardAssembly.h
|
||||
12302;0x300e;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\AcsBoardAssembly.h
|
||||
12303;0x300f;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\AcsBoardAssembly.h
|
||||
12400;0x3070;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\SusAssembly.h
|
||||
12401;0x3071;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\SusAssembly.h
|
||||
12402;0x3072;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\SusAssembly.h
|
||||
12403;0x3073;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\SusAssembly.h
|
||||
12500;0x30d4;CHILDREN_LOST_MODE;MEDIUM;;mission\system\TcsBoardAssembly.h
|
||||
13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s\core\CoreController.h
|
||||
13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s\core\CoreController.h
|
||||
13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s\core\CoreController.h
|
||||
13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s\core\CoreController.h
|
||||
|
||||
|
File diff suppressed because it is too large
Load Diff
@ -566,6 +566,13 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
|
||||
{OpCodeDictKeys.TIMEOUT: 2.0},
|
||||
),
|
||||
"41": ("PLOC Supervisor: CAN loopback test", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"42": ("PLOC Supervisor: Perform update", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"43": ("PLOC Supervisor: Terminate supervisor process", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"44": ("PLOC Supervisor: Start MPSoC quiet", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"45": ("PLOC Supervisor: Set shutdown timeout", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"46": ("PLOC Supervisor: Factory flash", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"47": ("PLOC Supervisor: Enable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
"48": ("PLOC Supervisor: Disable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
|
||||
}
|
||||
service_ploc_supv_tuple = ("PLOC Supervisor", op_code_dict_srv_ploc_supv)
|
||||
|
||||
|
||||
@ -13,6 +13,7 @@ from tmtccmd.config.definitions import QueueCommands
|
||||
from tmtccmd.tc.packer import TcQueueT
|
||||
from tmtccmd.utility.logger import get_console_logger
|
||||
from tmtccmd.tc.service_200_mode import pack_mode_data, Modes
|
||||
from utility.input_helper import InputHelper
|
||||
|
||||
LOGGER = get_console_logger()
|
||||
|
||||
@ -26,6 +27,13 @@ latchup_id_dict = {
|
||||
"6": "SAFECOTS",
|
||||
}
|
||||
|
||||
MANUAL_INPUT = "1"
|
||||
|
||||
update_file_dict = {
|
||||
MANUAL_INPUT: ["manual input", ""],
|
||||
"2": ["/mnt/sd0/ploc/supervisor/update.bin", "/mnt/sd0/ploc/supervisor/update.bin"],
|
||||
}
|
||||
|
||||
|
||||
class SupvActionIds:
|
||||
HK_REPORT = 1
|
||||
@ -69,6 +77,13 @@ class SupvActionIds:
|
||||
UPDATE_IMAGE_DATA = 39
|
||||
FACTORY_RESET_CLEAR_MIRROR = 40
|
||||
FACTORY_RESET_CLEAR_CIRCULAR = 41
|
||||
START_MPSOC_QUIET = 45
|
||||
SET_SHUTDOWN_TIMEOUT = 46
|
||||
FACTORY_FLASH = 47
|
||||
PERFORM_UPDATE = 48
|
||||
TERMINATE_SUPV_HELPER = 49
|
||||
ENABLE_AUTO_TM = 50
|
||||
DISABLE_AUTO_TM = 51
|
||||
|
||||
|
||||
class SupvHkIds:
|
||||
@ -361,6 +376,51 @@ def pack_ploc_supv_commands(
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=56, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "42":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Perform update"))
|
||||
command = pack_update_command(object_id)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=57, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "43":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Terminate supervisor process"))
|
||||
command = object_id + struct.pack(
|
||||
"!I", SupvActionIds.TERMINATE_SUPV_HELPER
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=58, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "44":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Start MPSoC quiet"))
|
||||
command = object_id + struct.pack(
|
||||
"!I", SupvActionIds.START_MPSOC_QUIET
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=59, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "45":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Set shutdown timeout"))
|
||||
command = pack_set_shutdown_timeout_command(object_id)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=60, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "46":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Factory flash"))
|
||||
command = object_id + struct.pack(
|
||||
"!I", SupvActionIds.FACTORY_FLASH
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=61, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "47":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable auto TM"))
|
||||
command = object_id + struct.pack(
|
||||
"!I", SupvActionIds.ENABLE_AUTO_TM
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=62, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
elif op_code == "48":
|
||||
tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Disable auto TM"))
|
||||
command = object_id + struct.pack(
|
||||
"!I", SupvActionIds.DISABLE_AUTO_TM
|
||||
)
|
||||
command = PusTelecommand(service=8, subservice=128, ssc=63, app_data=command)
|
||||
tc_queue.appendleft(command.pack_command_tuple())
|
||||
|
||||
return tc_queue
|
||||
|
||||
@ -605,6 +665,30 @@ def pack_set_debug_verbosity_cmd(object_id: bytearray) -> bytearray:
|
||||
return command
|
||||
|
||||
|
||||
def pack_update_command(object_id: bytearray) -> bytearray:
|
||||
command = bytearray()
|
||||
memory_id = int(input("Specify memory ID: "))
|
||||
start_address = int(input("Specify start address: 0x"), 16)
|
||||
update_file = get_update_file()
|
||||
command += object_id
|
||||
command += struct.pack('!I', SupvActionIds.PERFORM_UPDATE)
|
||||
command += bytearray(update_file, 'utf-8')
|
||||
# Adding null terminator
|
||||
command += bytes(0)
|
||||
command += struct.pack('!B', memory_id)
|
||||
command += struct.pack('!I', start_address)
|
||||
return command
|
||||
|
||||
|
||||
def pack_set_shutdown_timeout_command(object_id: bytearray) -> bytearray:
|
||||
command = bytearray()
|
||||
command += object_id
|
||||
command += struct.pack('!I', SupvActionIds.SET_SHUTDOWN_TIMEOUT)
|
||||
timeout = int(input("Specify shutdown timeout (ms): "))
|
||||
command += struct.pack('!I', timeout)
|
||||
return command
|
||||
|
||||
|
||||
def get_debug_verbosity() -> int:
|
||||
tries = 0
|
||||
while tries < 3:
|
||||
@ -650,3 +734,14 @@ def pack_read_gpio_cmd(object_id: bytearray) -> bytearray:
|
||||
command = command + struct.pack("!B", port)
|
||||
command = command + struct.pack("!B", pin)
|
||||
return command
|
||||
|
||||
|
||||
def get_update_file() -> str:
|
||||
LOGGER.info("Specify update file ")
|
||||
input_helper = InputHelper(update_file_dict)
|
||||
key = input_helper.get_key()
|
||||
if key == MANUAL_INPUT:
|
||||
file = input("Ploc MPSoC: Specify absolute name of update file: ")
|
||||
else:
|
||||
file = update_file_dict[key][1]
|
||||
return file
|
||||
|
||||
Loading…
Reference in New Issue
Block a user