Merge pull request 'TCS CTRL Info Set' (#215) from tcs-ctrl-info-set into main
Some checks failed
EIVE/-/pipeline/head There was a failure building this commit

Reviewed-on: #215
Reviewed-by: Marius Eggert <eggertm@irs.uni-stuttgart.de>
This commit is contained in:
Marius Eggert 2023-07-11 09:31:49 +02:00
commit ac84ac2c3e
10 changed files with 222 additions and 91 deletions

View File

@ -65,7 +65,8 @@ class CustomServiceList(str, enum.Enum):
PL_SS = "pl_subsystem"
ACS_BRD_ASS = "acs_brd_ass"
SUS_BRD_ASS = "sus_brd_ass"
TCS = "tcs"
TCS_SS = "tcs_subsystem"
TCS_CTRL = "tcs_ctrl"
TCS_ASS = "tcs_ass"
TIME = "time"
PROCEDURE = "proc"

View File

@ -6,6 +6,7 @@ from typing import cast
from eive_tmtc.tmtc.acs.gyros import handle_gyr_cmd
from eive_tmtc.tmtc.acs.mgms import handle_mgm_cmd
from eive_tmtc.tmtc.power.power import pack_power_commands
from eive_tmtc.tmtc.tcs.ctrl import pack_tcs_ctrl_commands
from eive_tmtc.tmtc.tcs.rtd import pack_rtd_commands
from eive_tmtc.tmtc.payload.scex import pack_scex_cmds
from eive_tmtc.tmtc.tcs.subsystem import pack_tcs_sys_commands
@ -99,8 +100,10 @@ def handle_default_procedure( # noqa C901: Complexity okay here.
if service == CustomServiceList.ACU.value:
object_id = cast(ObjectIdU32, obj_id_man.get(ACU_HANDLER_ID))
return pack_acu_commands(object_id=object_id, q=queue_helper, op_code=op_code)
if service == CustomServiceList.TCS.value:
if service == CustomServiceList.TCS_SS.value:
return pack_tcs_sys_commands(q=queue_helper, op_code=op_code)
if service == CustomServiceList.TCS_CTRL.value:
return pack_tcs_ctrl_commands(q=queue_helper, op_code=op_code)
if service == CustomServiceList.TMP1075.value:
menu_dict = {
"0": ("TMP1075 TCS Board 0", TMP1075_HANDLER_TCS_BRD_0_ID),

View File

@ -48,10 +48,7 @@ FORWARD_SENSOR_TEMPS = False
def handle_hk_packet(
raw_tm: bytes,
obj_id_dict: ObjectIdDictT,
printer: FsfwTmTcPrinter,
hk_level: int
raw_tm: bytes, obj_id_dict: ObjectIdDictT, printer: FsfwTmTcPrinter, hk_level: int
):
tm_packet = Service3FsfwTm.unpack(raw_telemetry=raw_tm, custom_hk_handling=False)
named_obj_id = obj_id_dict.get(tm_packet.object_id.as_bytes)

View File

@ -29,7 +29,7 @@ def pus_factory_hook( # noqa C901 : Complexity okay here
verif_wrapper: VerificationWrapper,
printer: FsfwTmTcPrinter,
raw_logger: RawTmtcTimedLogWrapper,
hk_level: int
hk_level: int,
):
if len(packet) < 8:
_LOGGER.warning("Detected packet shorter than 8 bytes!")
@ -49,7 +49,9 @@ def pus_factory_hook( # noqa C901 : Complexity okay here
if service == 1:
handle_service_1_fsfw_packet(wrapper=verif_wrapper, raw_tm=packet)
elif service == 3:
handle_hk_packet(printer=printer, raw_tm=packet, obj_id_dict=obj_id_dict, hk_level=hk_level)
handle_hk_packet(
printer=printer, raw_tm=packet, obj_id_dict=obj_id_dict, hk_level=hk_level
)
elif service == 5:
handle_event_packet(raw_tm=packet, pw=pw)
elif service == 8:

View File

@ -0,0 +1,92 @@
from eive_tmtc.config.definitions import CustomServiceList
from eive_tmtc.config.object_ids import TCS_CONTROLLER
from eive_tmtc.tmtc.tcs import CtrlSetId
from eive_tmtc.tmtc.tcs.brd_assy import pack_tcs_ass_cmds
from tmtccmd.config.tmtc import (
tmtc_definitions_provider,
TmtcDefinitionWrapper,
OpCodeEntry,
)
from tmtccmd.tc import DefaultPusQueueHelper
from tmtccmd.tc.pus_3_fsfw_hk import (
make_sid,
generate_one_hk_command,
create_request_one_diag_command,
create_enable_periodic_hk_command_with_interval,
create_request_one_hk_command,
)
class OpCode:
REQUEST_PRIMARY_TEMP_SET = "temp"
ENABLE_TEMP_SET = "enable_temp_set"
REQUEST_DEVICE_TEMP_SET = "temp_devs"
REQUEST_DEVICE_SUS_SET = "temp_sus"
REQUEST_HEATER_INFO = "heater_info"
REQUEST_TCS_CTRL_INFO = "tcs_ctrl_info"
class Info:
ENABLE_TEMP_SET = "Enable Primary Temperature Set"
REQUEST_PRIMARY_TEMP_SET = "Request HK set of primary sensor temperatures"
REQUEST_DEVICE_TEMP_SET = "Request HK set of device sensor temperatures"
REQUEST_DEVICE_SUS_SET = "Request HK set of the SUS temperatures"
REQUEST_HEATER_INFO = "Request heater information"
REQUEST_TCS_CTRL_INFO = "Request TCS controller information"
def pack_tcs_ctrl_commands(q: DefaultPusQueueHelper, op_code: str):
if op_code == OpCode.REQUEST_PRIMARY_TEMP_SET:
sensor_set_sid = make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS)
q.add_log_cmd(Info.REQUEST_PRIMARY_TEMP_SET)
q.add_pus_tc(generate_one_hk_command(sensor_set_sid))
if op_code == OpCode.REQUEST_DEVICE_TEMP_SET:
q.add_log_cmd(Info.REQUEST_DEVICE_TEMP_SET)
q.add_pus_tc(
generate_one_hk_command(make_sid(TCS_CONTROLLER, CtrlSetId.DEVICE_SENSORS))
)
if op_code == OpCode.REQUEST_DEVICE_SUS_SET:
q.add_log_cmd(Info.REQUEST_DEVICE_SUS_SET)
q.add_pus_tc(
generate_one_hk_command(
make_sid(TCS_CONTROLLER, CtrlSetId.SUS_TEMP_SENSORS)
)
)
if op_code == OpCode.REQUEST_HEATER_INFO:
q.add_log_cmd(Info.REQUEST_HEATER_INFO)
q.add_pus_tc(
create_request_one_diag_command(
make_sid(TCS_CONTROLLER, CtrlSetId.HEATER_INFO)
)
)
if op_code == OpCode.REQUEST_TCS_CTRL_INFO:
q.add_log_cmd(Info.REQUEST_TCS_CTRL_INFO)
q.add_pus_tc(
create_request_one_hk_command(
make_sid(TCS_CONTROLLER, CtrlSetId.TCS_CTRL_INFO)
)
)
if op_code == OpCode.ENABLE_TEMP_SET:
interval_seconds = float(input("Please specify interval in seconds: "))
cmds = create_enable_periodic_hk_command_with_interval(
False, make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS), interval_seconds
)
for cmd in cmds:
q.add_pus_tc(cmd)
pack_tcs_ass_cmds(q, op_code)
@tmtc_definitions_provider
def add_tcs_ctrl_cmds(defs: TmtcDefinitionWrapper):
oce = OpCodeEntry()
oce.add(keys=OpCode.ENABLE_TEMP_SET, info=Info.ENABLE_TEMP_SET)
oce.add(keys=OpCode.REQUEST_PRIMARY_TEMP_SET, info=Info.REQUEST_PRIMARY_TEMP_SET)
oce.add(keys=OpCode.REQUEST_DEVICE_TEMP_SET, info=Info.REQUEST_DEVICE_TEMP_SET)
oce.add(keys=OpCode.REQUEST_DEVICE_SUS_SET, info=Info.REQUEST_DEVICE_SUS_SET)
oce.add(keys=OpCode.REQUEST_HEATER_INFO, info=Info.REQUEST_HEATER_INFO)
oce.add(keys=OpCode.REQUEST_TCS_CTRL_INFO, info=Info.REQUEST_TCS_CTRL_INFO)
defs.add_service(
name=CustomServiceList.TCS_CTRL,
info="TCS controller",
op_code_entry=oce,
)

View File

@ -12,3 +12,16 @@ class CtrlSetId(enum.IntEnum):
class TcsSubmode(enum.IntEnum):
DEFAULT = 0
NO_HEATER_CTRL = 1
class Heater(enum.IntEnum):
HEATER_0_PLOC_PROC_BRD = 0
HEATER_1_PCDU_BRD = 1
HEATER_2_ACS_BRD = 2
HEATER_3_OBC_BRD = 3
HEATER_4_CAMERA = 4
HEATER_5_STR = 5
HEATER_6_DRO = 6
HEATER_7_SYRLINKS = 7
NUMBER_OF_SWITCHES = 8
NONE = 0xFF

View File

@ -7,6 +7,7 @@ import enum
from eive_tmtc.config.definitions import CustomServiceList
from eive_tmtc.config.object_ids import get_object_ids
from eive_tmtc.tmtc.tcs.defs import Heater
from tmtccmd.config import TmtcDefinitionWrapper, OpCodeEntry
from tmtccmd.config.tmtc import tmtc_definitions_provider
from tmtccmd.tc import DefaultPusQueueHelper
@ -20,18 +21,6 @@ from tmtccmd.pus.s8_fsfw_funccmd import create_action_cmd
from spacepackets.ecss.tc import PusTelecommand
class Heater(enum.IntEnum):
HEATER_0_PLOC_PROC_BRD = 0
HEATER_1_PCDU_BRD = 1
HEATER_2_ACS_BRD = 2
HEATER_3_OBC_BRD = 3
HEATER_4_CAMERA = 4
HEATER_5_STR = 5
HEATER_6_DRO = 6
HEATER_7_SYRLINKS = 7
NUMBER_OF_SWITCHES = 8
HEATER_LOCATION = [
"PLOC Processing Board",
"PCDU PDU",

View File

@ -1,6 +1,5 @@
from .defs import CtrlSetId
from eive_tmtc.config.definitions import CustomServiceList
from eive_tmtc.config.object_ids import TCS_CONTROLLER, TCS_SUBSYSTEM_ID
from eive_tmtc.config.object_ids import TCS_SUBSYSTEM_ID
from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
from eive_tmtc.tmtc.tcs.brd_assy import pack_tcs_ass_cmds
from tmtccmd.config.tmtc import (
@ -10,74 +9,28 @@ from tmtccmd.config.tmtc import (
)
from tmtccmd.tc import DefaultPusQueueHelper
from tmtccmd.tc.pus_200_fsfw_mode import Mode, create_announce_mode_recursive_command
from tmtccmd.tc.pus_3_fsfw_hk import (
make_sid,
generate_one_hk_command,
create_enable_periodic_hk_command_with_interval,
create_request_one_diag_command,
)
class OpCodeSys:
OFF = ["off"]
NML = ["nml"]
REQUEST_PRIMARY_TEMP_SET = ["temp"]
ENABLE_TEMP_SET = "enable_temp_set"
REQUEST_DEVICE_TEMP_SET = ["temp_devs"]
REQUEST_DEVICE_SUS_SET = ["temp_sus"]
REQUEST_HEATER_INFO = "heater_info"
class OpCode:
OFF = "off"
NML = "nml"
ANNOUNCE_MODES = "announce_modes"
class InfoSys:
OFF = "Switch TCS subsystem OFF"
NML = "Switch TCS subsystem NORMAL (nominal)"
ENABLE_TEMP_SET = "Enable Primary Temperature Set"
REQUEST_PRIMARY_TEMP_SET = "Request HK set of primary sensor temperatures"
REQUEST_DEVICE_TEMP_SET = "Request HK set of device sensor temperatures"
REQUEST_DEVICE_SUS_SET = "Request HK set of the SUS temperatures"
REQUEST_HEATER_INFO = "Request heater information"
ANNOUNCE_MODES = "Announce Modes recursively"
def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
if op_code in OpCodeSys.REQUEST_PRIMARY_TEMP_SET:
sensor_set_sid = make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS)
q.add_log_cmd(InfoSys.REQUEST_PRIMARY_TEMP_SET)
q.add_pus_tc(generate_one_hk_command(sensor_set_sid))
if op_code in OpCodeSys.REQUEST_DEVICE_TEMP_SET:
q.add_log_cmd(InfoSys.REQUEST_DEVICE_TEMP_SET)
q.add_pus_tc(
generate_one_hk_command(make_sid(TCS_CONTROLLER, CtrlSetId.DEVICE_SENSORS))
)
if op_code in OpCodeSys.REQUEST_DEVICE_SUS_SET:
q.add_log_cmd(InfoSys.REQUEST_DEVICE_SUS_SET)
q.add_pus_tc(
generate_one_hk_command(
make_sid(TCS_CONTROLLER, CtrlSetId.SUS_TEMP_SENSORS)
)
)
if op_code == OpCodeSys.REQUEST_HEATER_INFO:
q.add_log_cmd(InfoSys.REQUEST_HEATER_INFO)
q.add_pus_tc(
create_request_one_diag_command(
make_sid(TCS_CONTROLLER, CtrlSetId.HEATER_INFO)
)
)
if op_code in OpCodeSys.OFF:
if op_code == OpCode.OFF:
q.add_log_cmd(InfoSys.OFF)
pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.OFF, 0, q, InfoSys.OFF)
if op_code in OpCodeSys.NML:
if op_code == OpCode.NML:
q.add_log_cmd(InfoSys.NML)
pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.NORMAL, 0, q, InfoSys.OFF)
if op_code == OpCodeSys.ENABLE_TEMP_SET:
interval_seconds = float(input("Please specify interval in seconds: "))
cmds = create_enable_periodic_hk_command_with_interval(
False, make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS), interval_seconds
)
for cmd in cmds:
q.add_pus_tc(cmd)
if op_code == OpCodeSys.ANNOUNCE_MODES:
if op_code == OpCode.ANNOUNCE_MODES:
q.add_log_cmd(InfoSys.ANNOUNCE_MODES)
q.add_pus_tc(create_announce_mode_recursive_command(TCS_SUBSYSTEM_ID))
pack_tcs_ass_cmds(q, op_code)
@ -86,20 +39,11 @@ def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
@tmtc_definitions_provider
def add_tcs_subsystem_cmds(defs: TmtcDefinitionWrapper):
oce = OpCodeEntry()
oce.add(keys=OpCodeSys.OFF, info=InfoSys.OFF)
oce.add(keys=OpCodeSys.NML, info=InfoSys.NML)
oce.add(
keys=OpCodeSys.REQUEST_PRIMARY_TEMP_SET, info=InfoSys.REQUEST_PRIMARY_TEMP_SET
)
oce.add(
keys=OpCodeSys.REQUEST_DEVICE_TEMP_SET, info=InfoSys.REQUEST_DEVICE_TEMP_SET
)
oce.add(keys=OpCodeSys.REQUEST_DEVICE_SUS_SET, info=InfoSys.REQUEST_DEVICE_SUS_SET)
oce.add(keys=OpCodeSys.REQUEST_HEATER_INFO, info=InfoSys.REQUEST_HEATER_INFO)
oce.add(keys=OpCodeSys.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
oce.add(keys=OpCodeSys.ENABLE_TEMP_SET, info=InfoSys.ENABLE_TEMP_SET)
oce.add(keys=OpCode.OFF, info=InfoSys.OFF)
oce.add(keys=OpCode.NML, info=InfoSys.NML)
oce.add(keys=OpCode.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
defs.add_service(
name=CustomServiceList.TCS,
info="TCS",
name=CustomServiceList.TCS_SS,
info="TCS subsystem",
op_code_entry=oce,
)

View File

@ -1,7 +1,11 @@
import dataclasses
import datetime
import enum
import logging
import struct
from eive_tmtc.pus_tm.defs import PrintWrapper
from eive_tmtc.tmtc.tcs.defs import Heater
from tmtccmd.fsfw import validity_buffer_list
from tmtccmd.util import ObjectIdU32
from .defs import CtrlSetId
@ -11,6 +15,45 @@ from .heater import HEATER_LOCATION
_LOGGER = logging.getLogger(__name__)
class ThermalComponent(enum.IntEnum):
NONE = 0
ACS_BOARD = 1
MGT = 2
RW = 3
STR = 4
IF_BOARD = 5
TCS_BOARD = 6
OBC = 7
LEGACY_OBCIF_BOARD = 8
SBAND_TRANSCEIVER = 9
PCDUP60_BOARD = 10
PCDUACU = 11
PCDUPDU = 12
PLPCDU_BOARD = 13
PLOCMISSION_BOARD = 14
PLOCPROCESSING_BOARD = 15
DAC = 16
CAMERA = 17
DRO = 18
X8 = 19
HPA = 20
TX = 21
MPA = 22
SCEX_BOARD = 23
NUM_ENTRIES = 24
@dataclasses.dataclass
class TcsCtrlComponentInfo:
component: ThermalComponent
# Heater on or off?
state: bool
used_sensor_idx: int
used_heater: Heater
start_time: datetime.datetime
end_time: datetime.datetime
def handle_thermal_controller_hk_data(
object_id: ObjectIdU32, pw: PrintWrapper, set_id: int, hk_data: bytes
):
@ -119,5 +162,50 @@ def handle_thermal_controller_hk_data(
)
current_draw = struct.unpack("!H", hk_data[8:10])[0]
print(f"Heater Power Channel Current Draw: {current_draw} mA")
elif set_id == CtrlSetId.TCS_CTRL_INFO:
pw.dlog("Received TCS CTRL information set")
current_idx = 0
heater_states = hk_data[0 : ThermalComponent.NUM_ENTRIES]
current_idx += ThermalComponent.NUM_ENTRIES
used_sensor_idx = hk_data[
current_idx : current_idx + ThermalComponent.NUM_ENTRIES
]
current_idx += ThermalComponent.NUM_ENTRIES
used_heater_idx = hk_data[
current_idx : current_idx + ThermalComponent.NUM_ENTRIES
]
current_idx += ThermalComponent.NUM_ENTRIES
start_and_end_time_fmt_str = "!IIIIIIIIIIIIIIIIIIIIIIII"
data_len = struct.calcsize(start_and_end_time_fmt_str)
start_times = struct.unpack(
start_and_end_time_fmt_str, hk_data[current_idx : current_idx + data_len]
)
current_idx += data_len
end_times = struct.unpack(
start_and_end_time_fmt_str, hk_data[current_idx : current_idx + data_len]
)
current_idx += data_len
component_list = []
for i in range(ThermalComponent.NUM_ENTRIES):
info = TcsCtrlComponentInfo(
component=ThermalComponent(i),
state=bool(heater_states[i]),
used_sensor_idx=used_sensor_idx[i],
used_heater=Heater(used_heater_idx[i]),
start_time=datetime.datetime.fromtimestamp(
start_times[i], datetime.timezone.utc
),
end_time=datetime.datetime.fromtimestamp(
end_times[i], datetime.timezone.utc
),
)
component_str = f"{info.component!r}".ljust(46)
state_str = "ON" if info.state else "OFF"
pw.dlog(
f"{component_str}: {state_str.ljust(4)} | Sensor Index "
f"{info.used_sensor_idx} | {info.used_heater!r} | Start "
f"{info.start_time} | End {info.end_time}"
)
component_list.append(info)
else:
_LOGGER.warning(f"Unimplemented set ID {set_id}")

View File

@ -166,7 +166,7 @@ class PusHandler(SpecificApidHandlerBase):
wrapper: VerificationWrapper,
printer: FsfwTmTcPrinter,
raw_logger: RawTmtcTimedLogWrapper,
hk_level: int
hk_level: int,
):
super().__init__(PUS_APID, None)
self.printer = printer
@ -177,7 +177,9 @@ class PusHandler(SpecificApidHandlerBase):
def handle_tm(self, packet: bytes, _user_args: any):
# with open("tc.bin", "wb") as of:
# of.write(packet)
pus_factory_hook(packet, self.verif_wrapper, self.printer, self.raw_logger, self.hk_level)
pus_factory_hook(
packet, self.verif_wrapper, self.printer, self.raw_logger, self.hk_level
)
class UnknownApidHandler(GenericApidHandlerBase):
@ -408,7 +410,7 @@ def setup_tmtc_handlers(
printer: FsfwTmTcPrinter,
raw_logger: RawTmtcTimedLogWrapper,
gui: bool,
hk_level: int
hk_level: int,
) -> (CcsdsTmHandler, TcHandler):
cfdp_in_ccsds_wrapper = setup_cfdp_handler()
verification_wrapper = VerificationWrapper(