Merge remote-tracking branch 'origin/main' into bump-tmtccmd

CHANGELOG.md

@@ -10,6 +10,20 @@ list yields a list of all related PRs for each release.
 
 # [unreleased]
 
+# [v5.12.1] 2023-12-13
+
+## Added
+
+- A few new commands to test the TC scheduler.
+
+# [v5.12.0] 2023-12-06
+
+## Added
+
+- New ACS controller commands.
+
+# [v5.11.0] 2023-11-30
+
 ## Added
 
 - Added new commands to disable channel order checks partially for the payload PCDU normal modes.

eive_tmtc/config/events.csv

@@ -93,9 +93,10 @@ Event ID (dec); Event ID (hex); Name; Severity; Description; File Path
 11203;0x2bc3;MEKF_INVALID_INFO;INFO;MEKF was not able to compute a solution. P1: MEKF state on exit;mission/acs/defs.h
 11204;0x2bc4;MEKF_RECOVERY;INFO;MEKF is able to compute a solution again.;mission/acs/defs.h
 11205;0x2bc5;MEKF_AUTOMATIC_RESET;INFO;MEKF performed an automatic reset after detection of nonfinite values.;mission/acs/defs.h
-11206;0x2bc6;MEKF_INVALID_MODE_VIOLATION;HIGH;MEKF was not able to compute a solution during any pointing ACS mode for a prolonged time.;mission/acs/defs.h
+11206;0x2bc6;PTG_CTRL_NO_ATTITUDE_INFORMATION;HIGH;For a prolonged time, no attitude information was available for the Pointing Controller. Falling back to Safe Mode.;mission/acs/defs.h
 11207;0x2bc7;SAFE_MODE_CONTROLLER_FAILURE;HIGH;The ACS safe mode controller was not able to compute a solution and has failed. P1: Missing information about magnetic field, P2: Missing information about rotational rate;mission/acs/defs.h
 11208;0x2bc8;TLE_TOO_OLD;INFO;The TLE for the SGP4 Propagator has become too old.;mission/acs/defs.h
+11209;0x2bc9;TLE_FILE_READ_FAILED;LOW;The TLE could not be read from the filesystem.;mission/acs/defs.h
 11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/power/defs.h
 11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/power/defs.h
 11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;No description;mission/power/defs.h

eive_tmtc/config/returnvalues.csv

@@ -387,6 +387,7 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x4304;PUS11_InvalidRelativeTime;No description;4;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4305;PUS11_ContainedTcTooSmall;No description;5;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4306;PUS11_ContainedTcCrcMissmatch;No description;6;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
+0x4307;PUS11_MapIsFull;No description;7;PUS_SERVICE_11;fsfw/src/fsfw/pus/Service11TelecommandScheduling.h
 0x4400;FILS_GenericFileError;No description;0;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
 0x4401;FILS_GenericDirError;No description;1;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
 0x4402;FILS_FilesystemInactive;No description;2;FILE_SYSTEM;fsfw/src/fsfw/filesystem/HasFileSystemIF.h
@@ -593,6 +594,8 @@ Full ID (hex); Name; Description; Unique ID; Subsytem Name; File Path
 0x69c0;SPVRTVIF_BufTooSmall;No description;192;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
 0x69c1;SPVRTVIF_NoReplyTimeout;No description;193;SUPV_RETURN_VALUES_IF;linux/payload/plocSupvDefs.h
 0x6a00;ACSCTRL_FileDeletionFailed;File deletion failed and at least one file is still existent.;0;ACS_CTRL;mission/controller/AcsController.h
+0x6a01;ACSCTRL_WriteFileFailed;Writing the TLE to the file has failed.;1;ACS_CTRL;mission/controller/AcsController.h
+0x6a02;ACSCTRL_ReadFileFailed;Reading the TLE to the file has failed.;2;ACS_CTRL;mission/controller/AcsController.h
 0x6b02;ACSMEKF_MekfUninitialized;No description;2;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6b03;ACSMEKF_MekfNoGyrData;No description;3;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h
 0x6b04;ACSMEKF_MekfNoModelVectors;No description;4;ACS_MEKF;mission/controller/acs/MultiplicativeKalmanFilter.h

eive_tmtc/pus_tm/action_reply_handler.py

@@ -10,6 +10,7 @@ from eive_tmtc.config.object_ids import (
     CORE_CONTROLLER_ID,
     STAR_TRACKER_ID,
     P60_DOCK_HANDLER,
+    ACS_CONTROLLER,
 )
 from eive_tmtc.tmtc.acs.imtq import ImtqActionId
 from eive_tmtc.pus_tm.defs import PrintWrapper
@@ -17,6 +18,7 @@ from eive_tmtc.tmtc.core import handle_core_ctrl_action_replies
 from eive_tmtc.tmtc.payload.ploc_mpsoc import handle_mpsoc_data_reply
 from eive_tmtc.tmtc.payload.ploc_supervisor import SupvActionId
 from eive_tmtc.tmtc.acs.star_tracker import handle_star_tracker_action_replies
+from eive_tmtc.tmtc.acs.acs_ctrl import handle_acs_ctrl_action_replies
 from eive_tmtc.tmtc.power.tm import handle_get_param_data_reply
 from tmtccmd.pus.s8_fsfw_action import Service8FsfwTm
 from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
@@ -53,6 +55,8 @@ def handle_action_reply(
         return handle_core_ctrl_action_replies(action_id, pw, custom_data)
     elif object_id.as_bytes == STAR_TRACKER_ID:
         return handle_star_tracker_action_replies(action_id, pw, custom_data)
+    elif object_id.as_bytes == ACS_CONTROLLER:
+        return handle_acs_ctrl_action_replies(action_id, pw, custom_data)
     elif object_id.as_bytes in [
         ACU_HANDLER_ID,
         PDU_1_HANDLER_ID,

eive_tmtc/pus_tm/hk_handler.py

@@ -16,6 +16,7 @@ from eive_tmtc.tmtc.payload.rad_sensor import handle_rad_sensor_data
 from eive_tmtc.tmtc.acs.sus import handle_sus_hk
 from eive_tmtc.tmtc.payload.ploc_supervisor import handle_supv_hk_data
 from eive_tmtc.tmtc.acs.reaction_wheels import handle_rw_hk_data
+from eive_tmtc.tmtc.power.pwr_ctrl import handle_pwr_ctrl_hk_data
 from eive_tmtc.tmtc.com.syrlinks_handler import handle_syrlinks_hk_data
 from eive_tmtc.tmtc.tcs import handle_thermal_controller_hk_data
 from eive_tmtc.tmtc.tcs.tmp1075 import handle_tmp_1075_hk_data
@@ -229,6 +230,10 @@ def handle_regular_hk_print(  # noqa C901: Complexity okay here
         return handle_acs_ctrl_hk_data(
             pw=pw, set_id=set_id, hk_data=hk_data, packet_time=packet_dt
         )
+    elif objb == obj_ids.PWR_CONTROLLER:
+        return handle_pwr_ctrl_hk_data(
+            pw=pw, set_id=set_id, hk_data=hk_data, packet_time=packet_dt
+        )
     else:
         _LOGGER.info(
             f"Service 3 TM: Parsing for object {object_id} and set ID {set_id} "

eive_tmtc/tmtc/acs/acs_ctrl.py

@@ -30,9 +30,9 @@ from tmtccmd.pus.s20_fsfw_param_defs import (
 from tmtccmd.pus.s200_fsfw_mode import Mode, pack_mode_command
 from tmtccmd.pus.tc.s3_fsfw_hk import (
     create_request_one_diag_command,
+    create_request_one_hk_command,
     disable_periodic_hk_command,
     enable_periodic_hk_command_with_interval,
-    generate_one_hk_command,
     make_sid,
 )
 from tmtccmd.tmtc.queue import DefaultPusQueueHelper
@@ -53,10 +53,17 @@ class SetId(enum.IntEnum):
     GYR_RAW_SET = 4
     GYR_PROC_SET = 5
     GPS_PROC_SET = 6
-    MEKF_DATA = 7
+    ATTITUDE_ESTIMATION_DATA = 7
     CTRL_VAL_DATA = 8
     ACTUATOR_CMD_DATA = 9
     FUSED_ROT_RATE_DATA = 10
+    FUSED_ROT_RATE_SOURCE_DATA = 11
+
+
+class DataSetRequest(enum.IntEnum):
+    ONESHOT = 0
+    ENABLE = 1
+    DISABLE = 2
 
 
 class ActionId(enum.IntEnum):
@@ -64,6 +71,7 @@ class ActionId(enum.IntEnum):
     RESET_MEKF = 1
     RESTORE_MEKF_NONFINITE_RECOVERY = 2
     UPDATE_TLE = 3
+    READ_TLE = 4
 
 
 CTRL_STRAT_DICT = {
@@ -84,67 +92,46 @@ CTRL_STRAT_DICT = {
     19: "SAFE_ECLIPSE_IDELING",
     20: "DETUMBLE_FULL",
     21: "DETUMBLE_DETERIORATED",
-    30: "PTG_MEKF",
+    100: "PTG_MEKF",
-    31: "PTG_RAW",
+    101: "PTG_STR",
+    102: "PTG_QUEST",
 }
 
-GPS_COURCE_DICT = {
+GPS_SOURCE_DICT = {
     0: "NONE",
     1: "GPS",
     2: "GPS_EXTRAPOLATED",
     3: "SGP4",
 }
 
+FUSED_ROT_RATE_SOURCE_DICT = {
+    0: "NONE",
+    1: "SUSMGM",
+    2: "QUEST",
+    3: "STR",
+}
+
 
 class OpCodes:
-    OFF = ["off"]
+    OFF = "off"
-    SAFE = ["safe"]
+    SAFE = "safe"
-    DTBL = ["safe_detumble"]
+    DTBL = "safe_detumble"
-    IDLE = ["ptg_idle"]
+    IDLE = "ptg_idle"
-    NADIR = ["ptg_nadir"]
+    NADIR = "ptg_nadir"
-    TARGET = ["ptg_target"]
+    TARGET = "ptg_target"
-    GS = ["ptg_target_gs"]
+    GS = "ptg_target_gs"
-    INERTIAL = ["ptg_inertial"]
+    INERTIAL = "ptg_inertial"
-    SAFE_PTG = ["confirm_deployment"]
+    SAFE_PTG = "confirm_deployment"
-    RESET_MEKF = ["reset_mekf"]
+    RESET_MEKF = "reset_mekf"
-    RESTORE_MEKF_NONFINITE_RECOVERY = ["restore_mekf_nonfinite_recovery"]
+    RESTORE_MEKF_NONFINITE_RECOVERY = "restore_mekf_nonfinite_recovery"
-    UPDATE_TLE = ["update_tle"]
+    UPDATE_TLE = "update_tle"
-    SET_PARAMETER_SCALAR = ["set_scalar_param"]
+    READ_TLE = "read_tle"
-    SET_PARAMETER_VECTOR = ["set_vector_param"]
+    SET_PARAMETER_SCALAR = "set_scalar_param"
-    SET_PARAMETER_MATRIX = ["set_matrix_param"]
+    SET_PARAMETER_VECTOR = "set_vector_param"
-    REQUEST_RAW_MGM_HK = ["mgm_raw_hk"]
+    SET_PARAMETER_MATRIX = "set_matrix_param"
-    ENABLE_RAW_MGM_HK = ["mgm_raw_enable_hk"]
+    ONE_SHOOT_HK = "one_shot_hk"
-    DISABLE_RAW_MGM_HK = ["mgm_raw_disable_hk"]
+    ENABLE_HK = "enable_hk"
-    REQUEST_PROC_MGM_HK = ["mgm_proc_hk"]
+    DISABLE_HK = "disable_hk"
-    ENABLE_PROC_MGM_HK = ["mgm_proc_enable_hk"]
-    DISABLE_PROC_MGM_HK = ["mgm_proc_disable_hk"]
-    REQUEST_RAW_SUS_HK = ["sus_raw_hk"]
-    ENABLE_RAW_SUS_HK = ["sus_raw_enable_hk"]
-    DISABLE_RAW_SUS_HK = ["sus_raw_disable_hk"]
-    REQUEST_PROC_SUS_HK = ["sus_proc_hk"]
-    ENABLE_PROC_SUS_HK = ["sus_proc_enable_hk"]
-    DISABLE_PROC_SUS_HK = ["sus_proc_disable_hk"]
-    REQUEST_RAW_GYR_HK = ["gyr_raw_hk"]
-    ENABLE_RAW_GYR_HK = ["gyr_raw_enable_hk"]
-    DISABLE_RAW_GYR_HK = ["gyr_raw_disable_hk"]
-    REQUEST_PROC_GYR_HK = ["gyr_proc_hk"]
-    ENABLE_PROC_GYR_HK = ["gyr_proc_enable_hk"]
-    DISABLE_PROC_GYR_HK = ["gyr_proc_disable_hk"]
-    REQUEST_PROC_GPS_HK = ["gps_proc_hk"]
-    ENABLE_PROC_GPS_HK = ["gps_proc_enable_hk"]
-    DISABLE_PROC_GPS_HK = ["gps_proc_disable_hk"]
-    REQUEST_MEKF_HK = ["mekf_hk"]
-    ENABLE_MEKF_HK = ["mekf_enable_hk"]
-    DISABLE_MEKF_HK = ["mekf_disable_hk"]
-    REQUEST_CTRL_VAL_HK = ["ctrl_val_hk"]
-    ENABLE_CTRL_VAL_HK = ["ctrl_val_enable_hk"]
-    DISABLE_CTRL_VAL_HK = ["ctrl_val_disable_hk"]
-    REQUEST_ACT_CMD_HK = ["act_cmd_hk"]
-    ENABLE_ACT_CMD_HK = ["act_cmd_enable_hk"]
-    DISABLE_ACT_CMD_HK = ["act_cmd_disable_hk"]
-    REQUEST_FUSED_ROT_RATE_HK = ["f_rot_rate_hk"]
-    ENABLE_FUSED_ROT_RATE_HK = ["f_rot_rate_enable_hk"]
-    DISABLE_FUSED_ROT_RATE_HK = ["f_rot_rate_disable_hk"]
 
 
 class Info:
@@ -160,42 +147,13 @@ class Info:
     RESET_MEKF = "Reset the MEKF"
     RESTORE_MEKF_NONFINITE_RECOVERY = "Restore MEKF non-finite recovery"
     UPDATE_TLE = "Update TLE"
+    READ_TLE = "Read the currently stored TLE"
     SET_PARAMETER_SCALAR = "Set Scalar Parameter"
     SET_PARAMETER_VECTOR = "Set Vector Parameter"
     SET_PARAMETER_MATRIX = "Set Matrix Parameter"
-    REQUEST_RAW_MGM_HK = "Request Raw MGM HK once"
+    ONE_SHOOT_HK = "One shoot HK Set"
-    ENABLE_RAW_MGM_HK = "Enable Raw MGM HK data generation"
+    ENABLE_HK = "Enable Periodic HK"
-    DISABLE_RAW_MGM_HK = "Disable Raw MGM HK data generation"
+    DISABLE_HK = "Disable Periodic HK"
-    REQUEST_PROC_MGM_HK = "Request Processed MGM HK"
-    ENABLE_PROC_MGM_HK = "Enable Processed MGM HK data generation"
-    DISABLE_PROC_MGM_HK = "Disable Processed MGM HK data generation"
-    REQUEST_RAW_SUS_HK = "Request Raw SUS HK"
-    ENABLE_RAW_SUS_HK = "Enable Raw SUS HK data generation"
-    DISABLE_RAW_SUS_HK = "Disable Raw SUS HK data generation"
-    REQUEST_PROC_SUS_HK = "Request Processed SUS HK"
-    ENABLE_PROC_SUS_HK = "Enable Processed SUS HK data generation"
-    DISABLE_PROC_SUS_HK = "Disable Processed MGM HK data generation"
-    REQUEST_RAW_GYR_HK = "Request Raw GYR HK"
-    ENABLE_RAW_GYR_HK = "Enable Raw GYR HK data generation"
-    DISABLE_RAW_GYR_HK = "Disable Raw GYR HK data generation"
-    REQUEST_PROC_GYR_HK = "Request Processed GYR HK"
-    ENABLE_PROC_GYR_HK = "Enable Processed GYR HK data generation"
-    DISABLE_PROC_GYR_HK = "Disable Processed GYR HK data generation"
-    REQUEST_PROC_GPS_HK = "Request Processed GPS HK"
-    ENABLE_PROC_GPS_HK = "Enable Processed GPS HK data generation"
-    DISABLE_PROC_GPS_HK = "Disable Processed GPS HK data generation"
-    REQUEST_MEKF_HK = "Request MEKF HK"
-    ENABLE_MEKF_HK = "Enable MEKF HK data generation"
-    DISABLE_MEKF_HK = "Disable MEKF HK data generation"
-    REQUEST_CTRL_VAL_HK = "Request Control Values HK"
-    ENABLE_CTRL_VAL_HK = "Enable Control Values HK data generation"
-    DISABLE_CTRL_VAL_HK = "Disable Control Values HK data generation"
-    REQUEST_ACT_CMD_HK = "Request Actuator Commands HK"
-    ENABLE_ACT_CMD_HK = "Enable Actuator Commands HK data generation"
-    DISABLE_ACT_CMD_HK = "Disable Actuator Commands HK data generation"
-    REQUEST_FUSED_ROT_RATE_HK = "Request Fused Rotational Rates HK"
-    ENABLE_FUSED_ROT_RATE_HK = "Enable Fused Rotational Rates HK data generation"
-    DISABLE_FUSED_ROT_RATE_HK = "Disable Fused Rotational Rates HK data generation"
 
 
 PERFORM_MGM_CALIBRATION = False
@@ -243,42 +201,13 @@ def acs_cmd_defs(defs: TmtcDefinitionWrapper):
         info=Info.RESTORE_MEKF_NONFINITE_RECOVERY,
     )
     oce.add(keys=OpCodes.UPDATE_TLE, info=Info.UPDATE_TLE)
+    oce.add(keys=OpCodes.READ_TLE, info=Info.READ_TLE)
     oce.add(keys=OpCodes.SET_PARAMETER_SCALAR, info=Info.SET_PARAMETER_SCALAR)
     oce.add(keys=OpCodes.SET_PARAMETER_VECTOR, info=Info.SET_PARAMETER_VECTOR)
     oce.add(keys=OpCodes.SET_PARAMETER_MATRIX, info=Info.SET_PARAMETER_MATRIX)
-    oce.add(keys=OpCodes.REQUEST_RAW_MGM_HK, info=Info.REQUEST_RAW_MGM_HK)
+    oce.add(keys=OpCodes.ONE_SHOOT_HK, info=Info.ONE_SHOOT_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_MGM_HK, info=Info.ENABLE_RAW_MGM_HK)
+    oce.add(keys=OpCodes.ENABLE_HK, info=Info.ENABLE_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_MGM_HK, info=Info.DISABLE_RAW_MGM_HK)
+    oce.add(keys=OpCodes.DISABLE_HK, info=Info.DISABLE_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_MGM_HK, info=Info.REQUEST_PROC_MGM_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_MGM_HK, info=Info.ENABLE_PROC_MGM_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_MGM_HK, info=Info.DISABLE_PROC_MGM_HK)
-    oce.add(keys=OpCodes.REQUEST_RAW_SUS_HK, info=Info.REQUEST_RAW_SUS_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_SUS_HK, info=Info.ENABLE_RAW_SUS_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_SUS_HK, info=Info.DISABLE_RAW_SUS_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_SUS_HK, info=Info.REQUEST_PROC_SUS_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_SUS_HK, info=Info.ENABLE_PROC_SUS_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_SUS_HK, info=Info.DISABLE_PROC_SUS_HK)
-    oce.add(keys=OpCodes.REQUEST_RAW_GYR_HK, info=Info.REQUEST_RAW_GYR_HK)
-    oce.add(keys=OpCodes.ENABLE_RAW_GYR_HK, info=Info.ENABLE_RAW_GYR_HK)
-    oce.add(keys=OpCodes.DISABLE_RAW_GYR_HK, info=Info.DISABLE_RAW_GYR_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_GYR_HK, info=Info.REQUEST_PROC_GYR_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_GYR_HK, info=Info.ENABLE_PROC_GYR_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_GYR_HK, info=Info.DISABLE_PROC_GYR_HK)
-    oce.add(keys=OpCodes.REQUEST_PROC_GPS_HK, info=Info.REQUEST_PROC_GPS_HK)
-    oce.add(keys=OpCodes.ENABLE_PROC_GPS_HK, info=Info.ENABLE_PROC_GPS_HK)
-    oce.add(keys=OpCodes.DISABLE_PROC_GPS_HK, info=Info.DISABLE_PROC_GPS_HK)
-    oce.add(keys=OpCodes.REQUEST_MEKF_HK, info=Info.REQUEST_MEKF_HK)
-    oce.add(keys=OpCodes.ENABLE_MEKF_HK, info=Info.ENABLE_MEKF_HK)
-    oce.add(keys=OpCodes.DISABLE_MEKF_HK, info=Info.DISABLE_MEKF_HK)
-    oce.add(keys=OpCodes.REQUEST_CTRL_VAL_HK, info=Info.REQUEST_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.ENABLE_CTRL_VAL_HK, info=Info.ENABLE_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.DISABLE_CTRL_VAL_HK, info=Info.DISABLE_CTRL_VAL_HK)
-    oce.add(keys=OpCodes.REQUEST_ACT_CMD_HK, info=Info.REQUEST_ACT_CMD_HK)
-    oce.add(keys=OpCodes.ENABLE_ACT_CMD_HK, info=Info.ENABLE_ACT_CMD_HK)
-    oce.add(keys=OpCodes.DISABLE_ACT_CMD_HK, info=Info.DISABLE_ACT_CMD_HK)
-    oce.add(keys=OpCodes.REQUEST_FUSED_ROT_RATE_HK, info=Info.REQUEST_FUSED_ROT_RATE_HK)
-    oce.add(keys=OpCodes.ENABLE_FUSED_ROT_RATE_HK, info=Info.ENABLE_FUSED_ROT_RATE_HK)
-    oce.add(keys=OpCodes.DISABLE_FUSED_ROT_RATE_HK, info=Info.DISABLE_FUSED_ROT_RATE_HK)
     defs.add_service(
         name=CustomServiceList.ACS_CTRL.value, info="ACS Controller", op_code_entry=oce
     )
@@ -353,230 +282,79 @@ def pack_acs_ctrl_command(q: DefaultPusQueueHelper, cmd_str: str):  # noqa C901
     elif cmd_str in OpCodes.SET_PARAMETER_MATRIX:
         q.add_log_cmd(f"{Info.SET_PARAMETER_MATRIX}")
         set_acs_ctrl_param_matrix(q)
-    elif cmd_str in OpCodes.REQUEST_RAW_MGM_HK:
+    elif cmd_str == OpCodes.READ_TLE:
-        q.add_log_cmd(Info.REQUEST_RAW_MGM_HK)
+        q.add_log_cmd(f"{Info.READ_TLE}")
-        q.add_pus_tc(
+        q.add_pus_tc(create_action_cmd(ACS_CONTROLLER, ActionId.READ_TLE))
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET))
+    elif cmd_str == OpCodes.SET_PARAMETER_SCALAR:
-        )
+        q.add_log_cmd(f"{Info.SET_PARAMETER_SCALAR}")
-    elif cmd_str in OpCodes.ENABLE_RAW_MGM_HK:
+        set_acs_ctrl_param_scalar(q)
-        interval = float(input("Please specify interval in floating point seconds: "))
+    elif cmd_str == OpCodes.SET_PARAMETER_VECTOR:
-        q.add_log_cmd(Info.ENABLE_RAW_MGM_HK)
+        q.add_log_cmd(f"{Info.SET_PARAMETER_VECTOR}")
-        cmd_tuple = enable_periodic_hk_command_with_interval(
+        set_acs_ctrl_param_vector(q)
-            False, make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET), interval
+    elif cmd_str == OpCodes.SET_PARAMETER_MATRIX:
-        )
+        q.add_log_cmd(f"{Info.SET_PARAMETER_MATRIX}")
-        q.add_pus_tc(cmd_tuple[0])
+        set_acs_ctrl_param_matrix(q)
-        q.add_pus_tc(cmd_tuple[1])
+    elif cmd_str == OpCodes.ONE_SHOOT_HK:
-    elif cmd_str in OpCodes.DISABLE_RAW_MGM_HK:
+        q.add_log_cmd(Info.ONE_SHOOT_HK)
-        q.add_log_cmd(Info.DISABLE_RAW_MGM_HK)
+        request_dataset(q, DataSetRequest.ONESHOT)
-        q.add_pus_tc(
+    elif cmd_str == OpCodes.ENABLE_HK:
-            disable_periodic_hk_command(
+        q.add_log_cmd(Info.ENABLE_HK)
-                False, make_sid(ACS_CONTROLLER, SetId.MGM_RAW_SET)
+        request_dataset(q, DataSetRequest.ENABLE)
-            )
+    elif cmd_str == OpCodes.DISABLE_HK:
-        )
+        q.add_log_cmd(Info.DISABLE_HK)
-    elif cmd_str in OpCodes.REQUEST_PROC_MGM_HK:
+        request_dataset(q, DataSetRequest.DISABLE)
-        q.add_log_cmd(Info.REQUEST_PROC_MGM_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET))
-        )
-    elif cmd_str in OpCodes.ENABLE_PROC_MGM_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_MGM_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_PROC_MGM_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_MGM_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.MGM_PROC_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_RAW_SUS_HK:
-        q.add_log_cmd(Info.REQUEST_RAW_SUS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET))
-        )
-    elif cmd_str in OpCodes.ENABLE_RAW_SUS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_RAW_SUS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_RAW_SUS_HK:
-        q.add_log_cmd(Info.DISABLE_RAW_SUS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.SUS_RAW_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_PROC_SUS_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_SUS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET))
-        )
-    elif cmd_str in OpCodes.ENABLE_PROC_SUS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_SUS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_PROC_SUS_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_SUS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.SUS_PROC_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_RAW_GYR_HK:
-        q.add_log_cmd(Info.REQUEST_RAW_GYR_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET))
-        )
-    elif cmd_str in OpCodes.ENABLE_RAW_GYR_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_RAW_GYR_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_RAW_GYR_HK:
-        q.add_log_cmd(Info.DISABLE_RAW_GYR_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                True, make_sid(ACS_CONTROLLER, SetId.GYR_RAW_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_PROC_GYR_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_GYR_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(
-                make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET)
-            )
-        )
-    elif cmd_str in OpCodes.ENABLE_PROC_GYR_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_GYR_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_PROC_GYR_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_GYR_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                True, make_sid(ACS_CONTROLLER, SetId.GYR_PROC_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_PROC_GPS_HK:
-        q.add_log_cmd(Info.REQUEST_PROC_GPS_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET))
-        )
-    elif cmd_str in OpCodes.ENABLE_PROC_GPS_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_PROC_GPS_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_PROC_GPS_HK:
-        q.add_log_cmd(Info.DISABLE_PROC_GPS_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.GPS_PROC_SET)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_MEKF_HK:
-        q.add_log_cmd(Info.REQUEST_MEKF_HK)
-        q.add_pus_tc(
-            create_request_one_diag_command(make_sid(ACS_CONTROLLER, SetId.MEKF_DATA))
-        )
-    elif cmd_str in OpCodes.ENABLE_MEKF_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_MEKF_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            True, make_sid(ACS_CONTROLLER, SetId.MEKF_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_MEKF_HK:
-        q.add_log_cmd(Info.DISABLE_MEKF_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(True, make_sid(ACS_CONTROLLER, SetId.MEKF_DATA))
-        )
-    elif cmd_str in OpCodes.REQUEST_CTRL_VAL_HK:
-        q.add_log_cmd(Info.REQUEST_CTRL_VAL_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA))
-        )
-    elif cmd_str in OpCodes.ENABLE_CTRL_VAL_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_CTRL_VAL_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_CTRL_VAL_HK:
-        q.add_log_cmd(Info.DISABLE_CTRL_VAL_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.CTRL_VAL_DATA)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_ACT_CMD_HK:
-        q.add_log_cmd(Info.REQUEST_ACT_CMD_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA))
-        )
-    elif cmd_str in OpCodes.ENABLE_ACT_CMD_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_ACT_CMD_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_ACT_CMD_HK:
-        q.add_log_cmd(Info.DISABLE_ACT_CMD_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.ACTUATOR_CMD_DATA)
-            )
-        )
-    elif cmd_str in OpCodes.REQUEST_FUSED_ROT_RATE_HK:
-        q.add_log_cmd(Info.REQUEST_FUSED_ROT_RATE_HK)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA))
-        )
-    elif cmd_str in OpCodes.ENABLE_FUSED_ROT_RATE_HK:
-        interval = float(input("Please specify interval in floating point seconds: "))
-        q.add_log_cmd(Info.ENABLE_FUSED_ROT_RATE_HK)
-        cmd_tuple = enable_periodic_hk_command_with_interval(
-            False, make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA), interval
-        )
-        q.add_pus_tc(cmd_tuple[0])
-        q.add_pus_tc(cmd_tuple[1])
-    elif cmd_str in OpCodes.DISABLE_FUSED_ROT_RATE_HK:
-        q.add_log_cmd(Info.DISABLE_FUSED_ROT_RATE_HK)
-        q.add_pus_tc(
-            disable_periodic_hk_command(
-                False, make_sid(ACS_CONTROLLER, SetId.FUSED_ROT_RATE_DATA)
-            )
-        )
     else:
         logging.getLogger(__name__).info(f"Unknown op code {cmd_str}")
 
 
+def request_dataset(q: DefaultPusQueueHelper, req_type: DataSetRequest):
+    for val in SetId:
+        print("{:<2}: {:<20}".format(val, val.name))
+    set_id = int(input("Specify the dataset \n" ""))
+    if set_id in [
+        SetId.GYR_RAW_SET,
+        SetId.GPS_PROC_SET,
+        SetId.ATTITUDE_ESTIMATION_DATA,
+    ]:
+        is_diag = True
+    else:
+        is_diag = False
+    match req_type:
+        case DataSetRequest.ONESHOT:
+            if is_diag:
+                q.add_pus_tc(
+                    create_request_one_diag_command(make_sid(ACS_CONTROLLER, set_id))
+                )
+            else:
+                q.add_pus_tc(
+                    create_request_one_hk_command(make_sid(ACS_CONTROLLER, set_id))
+                )
+        case DataSetRequest.ENABLE:
+            interval = float(
+                input("Please specify interval in floating point seconds: ")
+            )
+
+            if is_diag:
+                cmd_tuple = enable_periodic_hk_command_with_interval(
+                    True, make_sid(ACS_CONTROLLER, set_id), interval
+                )
+            else:
+                cmd_tuple = enable_periodic_hk_command_with_interval(
+                    False, make_sid(ACS_CONTROLLER, set_id), interval
+                )
+            q.add_pus_tc(cmd_tuple[0])
+            q.add_pus_tc(cmd_tuple[1])
+        case DataSetRequest.DISABLE:
+            if is_diag:
+                q.add_pus_tc(
+                    disable_periodic_hk_command(True, make_sid(ACS_CONTROLLER, set_id))
+                )
+            else:
+                q.add_pus_tc(
+                    disable_periodic_hk_command(False, make_sid(ACS_CONTROLLER, set_id))
+                )
+
+
 def set_acs_ctrl_param_scalar(q: DefaultPusQueueHelper):
     pt = int(
         input(
@@ -782,14 +560,16 @@ def handle_acs_ctrl_hk_data(
             handle_gyr_data_processed(pw, hk_data)
         case SetId.GPS_PROC_SET:
             handle_gps_data_processed(pw, hk_data)
-        case SetId.MEKF_DATA:
+        case SetId.ATTITUDE_ESTIMATION_DATA:
-            handle_mekf_data(pw, hk_data)
+            handle_attitude_estimation_data(pw, hk_data)
         case SetId.CTRL_VAL_DATA:
             handle_ctrl_val_data(pw, hk_data)
         case SetId.ACTUATOR_CMD_DATA:
             handle_act_cmd_data(pw, hk_data)
         case SetId.FUSED_ROT_RATE_DATA:
             handle_fused_rot_rate_data(pw, hk_data)
+        case SetId.FUSED_ROT_RATE_SOURCE_DATA:
+            handle_fused_rot_rate_source_data(pw, hk_data)
 
 
 def handle_acs_ctrl_sus_raw_data(pw: PrintWrapper, hk_data: bytes):
@@ -811,7 +591,7 @@ def handle_acs_ctrl_sus_raw_data(pw: PrintWrapper, hk_data: bytes):
         sus_list_formatted = vec_fmt.format(*sus_list)
         current_idx += length
         pw.dlog(f"SUS {idx} RAW: {sus_list_formatted}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=12)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=12))
 
 
 def handle_acs_ctrl_sus_processed_data(pw: PrintWrapper, hk_data: bytes):
@@ -847,7 +627,7 @@ def handle_acs_ctrl_sus_processed_data(pw: PrintWrapper, hk_data: bytes):
     sun_ijk_model = vec_fmt.format(*sun_ijk_model)
     current_idx += inc_len
     pw.dlog(f"{'SUS ijk Model'.ljust(25)}: {sun_ijk_model}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=15)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=15))
 
 
 def handle_raw_mgm_data(pw: PrintWrapper, hk_data: bytes):
@@ -903,7 +683,7 @@ def handle_raw_mgm_data(pw: PrintWrapper, hk_data: bytes):
         pw.dlog(f"{entry[0].ljust(28)}: {entry[1]}")
     current_idx += 1
     assert current_idx == 61
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6))
 
 
 def handle_mgm_data_processed(pw: PrintWrapper, hk_data: bytes):
@@ -957,7 +737,7 @@ def handle_mgm_data_processed(pw: PrintWrapper, hk_data: bytes):
     current_idx += inc_len
     if PERFORM_MGM_CALIBRATION:
         perform_mgm_calibration(pw, mgm_3)
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=8)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=8))
 
 
 def handle_gyr_data_raw(pw: PrintWrapper, hk_data: bytes):
@@ -991,7 +771,7 @@ def handle_gyr_data_raw(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"{'GYR 1 L3'.ljust(15)}: {float_str_fmt.format(*gyr_1_l3)}")
     pw.dlog(f"{'GYR 2 ADIS'.ljust(15)}: {float_str_fmt.format(*gyr_2_adis)}")
     pw.dlog(f"{'GYR 3 L3'.ljust(15)}: {float_str_fmt.format(*gyr_3_l3)}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 4)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], 4))
 
 
 GYR_NAMES = ["GYR 0 ADIS", "GYR 1 L3", "GYR 2 ADIS", "GYR 3 L3"]
@@ -1017,7 +797,7 @@ def handle_gyr_data_processed(pw: PrintWrapper, hk_data: bytes):
     ]
     pw.dlog(f"GYR Vec Total: {gyr_vec_tot}")
     current_idx += inc_len
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
 
 
 def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
@@ -1071,8 +851,8 @@ def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
         fmt_source, hk_data[current_idx : current_idx + inc_len_source]
     )[0]
     current_idx += inc_len_source
-    if GPS_COURCE_DICT.get(source) is not None:
+    if GPS_SOURCE_DICT.get(source) is not None:
-        pw.dlog(f"GPS Source: {GPS_COURCE_DICT[source]}")
+        pw.dlog(f"GPS Source: {GPS_SOURCE_DICT[source]}")
     else:
         pw.dlog(f"'GPS Source (key unknown)': {source}")
     pw.dlog(f"GPS Latitude: {lat} [deg]")
@@ -1080,10 +860,10 @@ def handle_gps_data_processed(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"GPS Altitude: {alt} [m]")
     pw.dlog(f"GPS Position: {pos} [m]")
     pw.dlog(f"GPS Velocity: {velo} [m/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=6))
 
 
-def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
+def handle_attitude_estimation_data(pw: PrintWrapper, hk_data: bytes):
     mekf_status = {
         0: "UNINITIALIZED",
         1: "NO_GYR_DATA",
@@ -1094,7 +874,7 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         10: "INITIALIZED",
         11: "RUNNING",
     }
-    pw.dlog("Received MEKF Set")
+    pw.dlog("Received Attitude Estimation Set")
     fmt_quat = "!dddd"
     fmt_str_4 = "[{:8.3f}, {:8.3f}, {:8.3f}, {:8.3f}]"
     fmt_str_3 = "[{:8.3f}, {:8.3f}, {:8.3f}]"
@@ -1103,11 +883,16 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
     inc_len_quat = struct.calcsize(fmt_quat)
     inc_len_vec = struct.calcsize(fmt_vec)
     inc_len_sts = struct.calcsize(fmt_sts)
-    if len(hk_data) < inc_len_quat + inc_len_vec + inc_len_sts:
+    old_size = inc_len_quat + inc_len_vec + inc_len_sts + 1
-        pw.dlog("Received HK set too small")
+    new_size = 2 * inc_len_quat + inc_len_vec + inc_len_sts + 1
+    size = len(hk_data)
+    if size not in [old_size, new_size]:
+        pw.dlog(f"Received Attitude Estimation HK Set of unexpected size: {size}")
         return
     current_idx = 0
-    quat = struct.unpack(fmt_quat, hk_data[current_idx : current_idx + inc_len_quat])
+    mekf_quat = struct.unpack(
+        fmt_quat, hk_data[current_idx : current_idx + inc_len_quat]
+    )
     current_idx += inc_len_quat
     rates = [
         rate * 180 / math.pi
@@ -1122,9 +907,17 @@ def handle_mekf_data(pw: PrintWrapper, hk_data: bytes):
         pw.dlog(f"{'MEKF Status'.ljust(25)}: {mekf_status[status]}")
     else:
         pw.dlog(f"{'MEKF Raw Status (key unknown)'.ljust(25)}: {status}")
-    pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*quat)}")
+    pw.dlog(f"{'MEKF Quaternion'.ljust(25)}: {fmt_str_4.format(*mekf_quat)}")
     pw.dlog(f"{'MEKF Rotational Rate'.ljust(25)}: {fmt_str_3.format(*rates)}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    if size == new_size:
+        quest_quat = struct.unpack(
+            fmt_quat, hk_data[current_idx : current_idx + inc_len_quat]
+        )
+        current_idx += inc_len_quat
+        pw.dlog(f"{'QUEST Quaternion'.ljust(25)}: {fmt_str_4.format(*quest_quat)}")
+        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=4))
+        return
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
 
 
 def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
@@ -1174,14 +967,14 @@ def handle_ctrl_val_data(pw: PrintWrapper, hk_data: bytes):
     ]
     current_idx += inc_len_vec
     if CTRL_STRAT_DICT.get(strat) is not None:
-        pw.dlog(f"{'Safe Ctrl Strategy'.ljust(25)}: {CTRL_STRAT_DICT[strat]}")
+        pw.dlog(f"{'Ctrl Strategy'.ljust(25)}: {CTRL_STRAT_DICT[strat]}")
     else:
-        pw.dlog(f"{'Safe Ctrl Strategy (key unknown)'.ljust(25)}: {strat}")
+        pw.dlog(f"{'Ctrl Strategy (key unknown)'.ljust(25)}: {strat}")
     pw.dlog(f"Control Values Target Quaternion: {tgt_quat}")
     pw.dlog(f"Control Values Error Quaternion: {err_quat}")
     pw.dlog(f"Control Values Error Angle: {err_ang} [deg]")
     pw.dlog(f"Control Values Target Rotational Rate: {tgt_rot} [deg/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
 
 
 def handle_act_cmd_data(pw: PrintWrapper, hk_data: bytes):
@@ -1220,15 +1013,20 @@ def handle_act_cmd_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"Actuator Commands RW Target Torque: {rw_tgt_torque}")
     pw.dlog(f"Actuator Commands RW Target Speed: {rw_tgt_speed}")
     pw.dlog(f"Actuator Commands MTQ Target Dipole: {mtq_tgt_dipole}")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
 
 
 def handle_fused_rot_rate_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog("Received Fused Rotation Rates Data Set")
     fmt_vec3_double = "!ddd"
     inc_len_vec3_double = struct.calcsize(fmt_vec3_double)
-    if len(hk_data) < 3 * inc_len_vec3_double:
+    fmt_source = "!B"
-        pw.dlog("Received HK set too small")
+    inc_len_source = struct.calcsize(fmt_source)
+    old_size = 3 * inc_len_vec3_double + 1
+    new_size = 3 * inc_len_vec3_double + inc_len_source + 1
+    size = len(hk_data)
+    if size not in [old_size, new_size]:
+        pw.dlog(f"Received Fused Rot Rate HK set of unexpected size: {len(hk_data)}")
         return
     current_idx = 0
     rot_rate_orthogonal = [
@@ -1255,7 +1053,91 @@ def handle_fused_rot_rate_data(pw: PrintWrapper, hk_data: bytes):
     pw.dlog(f"Fused Rotational Rate Orthogonal: {rot_rate_orthogonal} [deg/s]")
     pw.dlog(f"Fused Rotational Rate Parallel: {rot_rate_parallel} [deg/s]")
     pw.dlog(f"Fused Rotational Rate Total: {rot_rate_total} [deg/s]")
-    FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3)
+    if size == new_size:
+        rot_rate_source = struct.unpack(
+            fmt_source, hk_data[current_idx : current_idx + inc_len_source]
+        )[0]
+        current_idx += inc_len_source
+        if FUSED_ROT_RATE_SOURCE_DICT.get(rot_rate_source) is not None:
+            pw.dlog(
+                f"Fused Rotational Rate Source: {FUSED_ROT_RATE_SOURCE_DICT[rot_rate_source]}"
+            )
+        else:
+            pw.dlog(f"Ctrl Strategy (key unknown): {rot_rate_source}")
+        pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=4))
+        return
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=3))
+
+
+def handle_fused_rot_rate_source_data(pw: PrintWrapper, hk_data: bytes):
+    pw.dlog("Received Fused Rotation Rates Sources Data Set")
+    fmt_vec3_double = "!ddd"
+    inc_len_vec3_double = struct.calcsize(fmt_vec3_double)
+    if len(hk_data) < 5 * inc_len_vec3_double:
+        pw.dlog("Received HK set too small")
+        return
+    current_idx = 0
+    rot_rate_orthogonal_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_parallel_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_susmgm = [
+        f"{val*180/math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_quest = [
+        f"{val * 180 / math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    rot_rate_total_str = [
+        f"{val * 180 / math.pi:8.3f}"
+        for val in struct.unpack(
+            fmt_vec3_double, hk_data[current_idx : current_idx + inc_len_vec3_double]
+        )
+    ]
+    current_idx += inc_len_vec3_double
+    pw.dlog(
+        f"Fused Rotational Rate Orthogonal SUSMGM: {rot_rate_orthogonal_susmgm} [deg/s]"
+    )
+    pw.dlog(
+        f"Fused Rotational Rate Parallel SUSMGM: {rot_rate_parallel_susmgm} [deg/s]"
+    )
+    pw.dlog(f"Fused Rotational Rate Total SUSMGM: {rot_rate_total_susmgm} [deg/s]")
+    pw.dlog(f"Fused Rotational Rate Total QUEST: {rot_rate_total_quest} [deg/s]")
+    pw.dlog(f"Fused Rotational Rate Total STR: {rot_rate_total_str} [deg/s]")
+    pw.dlog(FsfwTmTcPrinter.get_validity_buffer(hk_data[current_idx:], num_vars=5))
+
+
+def handle_acs_ctrl_action_replies(
+    action_id: int, pw: PrintWrapper, custom_data: bytes
+):
+    if action_id == ActionId.READ_TLE:
+        handle_read_tle(pw, custom_data)
+
+
+def handle_read_tle(pw: PrintWrapper, custom_data: bytes):
+    pw.dlog("Received TLE")
+    data_length = 69 * 2
+    if len(custom_data) != data_length:
+        raise ValueError(f"Received data of unexpected length {len(custom_data)}")
+    tle = custom_data.decode()
+    pw.dlog(f"{tle[0:69]}\n{tle[69:69*2]}")
 
 
 def perform_mgm_calibration(  # noqa C901: Complexity okay

eive_tmtc/tmtc/core.py

@@ -5,9 +5,6 @@ import struct
 from pathlib import Path
 from typing import Tuple
 
-from eive_tmtc.pus_tm.defs import PrintWrapper
-
-from eive_tmtc.config.definitions import CustomServiceList
 from spacepackets.ecss import PusTelecommand
 from tmtccmd.config import CmdTreeNode, TmtcDefinitionWrapper
 
@@ -19,8 +16,22 @@ from tmtccmd.pus.s20_fsfw_param import (
     create_load_param_cmd,
 )
 from tmtccmd.config.tmtc import OpCodeEntry, tmtc_definitions_provider
-from eive_tmtc.config.object_ids import CORE_CONTROLLER_ID
 from tmtccmd.fsfw.tmtc_printer import FsfwTmTcPrinter
+from tmtccmd.pus.s8_fsfw_action import create_action_cmd
+from tmtccmd.pus.s11_tc_sched import (
+    create_enable_tc_sched_cmd,
+    create_disable_tc_sched_cmd,
+)
+from tmtccmd.pus.s20_fsfw_param import (
+    create_load_param_cmd,
+    create_scalar_u8_parameter,
+)
+from tmtccmd.pus.tc.s3_fsfw_hk import generate_one_hk_command, make_sid
+from tmtccmd.tmtc import DefaultPusQueueHelper
+
+from eive_tmtc.config.definitions import CustomServiceList
+from eive_tmtc.config.object_ids import CORE_CONTROLLER_ID
+from eive_tmtc.pus_tm.defs import PrintWrapper
 
 _LOGGER = logging.getLogger(__name__)
 
@@ -66,6 +77,7 @@ class ActionId(enum.IntEnum):
     MV_HELPER = 53
     RM_HELPER = 54
     MKDIR_HELPER = 55
+    ENABLE_SCHEDULER = 56
 
 
 class ParamId(enum.IntEnum):
@@ -115,6 +127,8 @@ class OpCode:
     RWD_SET_MAX_REBOOT_CNT = "rwd_max_cnt"
     AUTO_SWITCH_ENABLE = "auto_switch_enable"
     AUTO_SWITCH_DISABLE = "auto_switch_disable"
+    ENABLE_SCHEDULER = "enable_scheduler"
+    DISABLE_SCHEDULER = "disable_scheduler"
 
 
 class Info:
@@ -155,7 +169,8 @@ class Info:
     RWD_SET_MAX_REBOOT_CNT = "rwd_max_cnt"
     AUTO_SWITCH_ENABLE = "Enable Auto-Switch Feature with a specific target image"
     AUTO_SWITCH_DISABLE = "Disable Auto-Switch Feature"
-    GET_HK = "get_hk"
+    ENABLE_SCHEDULER = "Enable scheduler"
+    DISABLE_SCHEDULER = "Disable scheduler"
 
 
 class Chip(enum.IntEnum):
@@ -267,6 +282,8 @@ def add_core_controller_definitions(defs: TmtcDefinitionWrapper):
     oce.add(keys=OpCode.CP_HELPER, info=Info.CP_HELPER)
     oce.add(keys=OpCode.RM_HELPER, info=Info.RM_HELPER)
     oce.add(keys=OpCode.MKDIR_HELPER, info=Info.MKDIR_HELPER)
+    oce.add(keys=OpCode.ENABLE_SCHEDULER, info=Info.ENABLE_SCHEDULER)
+    oce.add(keys=OpCode.DISABLE_SCHEDULER, info=Info.DISABLE_SCHEDULER)
     defs.add_service(CustomServiceList.CORE.value, "Core Controller", oce)
 
 
@@ -540,6 +557,12 @@ def pack_core_commands(  # noqa C901
         q.add_pus_tc(
             create_action_cmd(CORE_CONTROLLER_ID, ActionId.MKDIR_HELPER, user_data)
         )
+    elif cmd_str == OpCode.ENABLE_SCHEDULER:
+        q.add_log_cmd(Info.ENABLE_SCHEDULER)
+        q.add_pus_tc(create_enable_tc_sched_cmd())
+    elif cmd_str == OpCode.DISABLE_SCHEDULER:
+        q.add_log_cmd(Info.DISABLE_SCHEDULER)
+        q.add_pus_tc(create_disable_tc_sched_cmd())
     else:
         _LOGGER.warning(
             f"Unknown operation code {cmd_str} for core controller commands"

eive_tmtc/tmtc/obj_prompt.py

@@ -4,6 +4,7 @@ from eive_tmtc.config.object_ids import (
     GPS_0_HEALTH_DEV,
     GYRO_0_ADIS_HANDLER_ID,
     GYRO_1_L3G_HANDLER_ID,
+    GYRO_2_ADIS_HANDLER_ID,
     ACS_BOARD_ASS_ID,
     RW_ASSEMBLY,
     SUS_BOARD_ASS_ID,
@@ -38,14 +39,15 @@ ACS_OBJ_DICT = {
     5: ("iMTQ MGT", IMTQ_HANDLER_ID),
     6: ("GYR 0 ADIS", GYRO_0_ADIS_HANDLER_ID),
     7: ("GYR 1 L3G", GYRO_1_L3G_HANDLER_ID),
-    8: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
+    8: ("GYR 2 ADIS", GYRO_2_ADIS_HANDLER_ID),
-    9: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
+    9: ("MGM 0 LIS3", MGM_0_LIS3_HANDLER_ID),
-    10: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
+    10: ("MGM 1 RM3100", MGM_1_RM3100_HANDLER_ID),
-    11: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
+    11: ("GPS 0 Health Device", GPS_0_HEALTH_DEV),
-    12: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
+    12: ("SUS 0", SUS_0_N_LOC_XFYFZM_PT_XF),
-    13: ("RW 1", RW1_ID),
+    13: ("SUS 6", SUS_6_R_LOC_XFYBZM_PT_XF),
-    14: ("RW 2", RW2_ID),
+    14: ("RW 1", RW1_ID),
-    15: ("STR", STAR_TRACKER_ID),
+    15: ("RW 2", RW2_ID),
+    16: ("STR", STAR_TRACKER_ID),
 }
 
 TCS_OBJ_DICT = {

eive_tmtc/tmtc/test.py

@@ -1,5 +1,10 @@
+import datetime
+import math
+import struct
+
 from spacepackets.ecss import PusService, PusTelecommand
 from tmtccmd.config import CmdTreeNode
+from tmtccmd.pus.s11_tc_sched import create_time_tagged_cmd
 from tmtccmd.pus.s17_test import create_service_17_ping_command
 from tmtccmd.tmtc import DefaultPusQueueHelper
 
@@ -8,12 +13,14 @@ class OpCode:
     PING = "ping"
     TRIGGER_EVENT = "trig_event"
     PING_WITH_DATA = "ping_with_data"
+    SCHEDULE_PING = "sched_ping"
 
 
 class Info:
     PING = "Simple Ping and Connection Test"
     TRIGGER_EVENT = "Trigger an event"
     PING_WITH_DATA = "Ping with data. Size of sent data is sent back"
+    SCHEDULE_PING = "Schedule a ping"
 
 
 def create_test_node() -> CmdTreeNode:
@@ -21,6 +28,7 @@ def create_test_node() -> CmdTreeNode:
     node.add_child(CmdTreeNode(OpCode.PING, Info.PING))
     node.add_child(CmdTreeNode(OpCode.TRIGGER_EVENT, Info.TRIGGER_EVENT))
     node.add_child(CmdTreeNode(OpCode.PING_WITH_DATA, Info.PING_WITH_DATA))
+    node.add_child(CmdTreeNode(OpCode.SCHEDULE_PING, Info.SCHEDULE_PING))
     return node
 
 
@@ -31,6 +39,21 @@ def build_test_commands(q: DefaultPusQueueHelper, cmd_path: str):
     if cmd_path == OpCode.TRIGGER_EVENT:
         q.add_log_cmd("Sending PUS TC Event Trigger [17, 128]")
         q.add_pus_tc(PusTelecommand(service=PusService.S17_TEST, subservice=128))
+    if cmd_path == OpCode.SCHEDULE_PING:
+        q.add_log_cmd("Sending scheduled PUS ping")
+        # Generate a UNIX timestamp 30 seconds in the future using the datetime API with a UTC timezone
+        now = datetime.datetime.now(tz=datetime.timezone.utc)
+        second_offset_to_now = input("Please specify offset to now in seconds: ")
+        now += datetime.timedelta(seconds=int(second_offset_to_now))
+        unix_stamp = struct.pack("!I", math.floor(now.timestamp()))
+        print(f"Sending ping scheuled at {now}")
+        ping = PusTelecommand(service=PusService.S17_TEST, subservice=128)
+        q.add_pus_tc(
+            create_time_tagged_cmd(
+                release_time=unix_stamp,
+                tc_to_insert=ping,
+            )
+        )
     if cmd_path == OpCode.PING_WITH_DATA:
         q.add_log_cmd("Sending Ping With Data, Size Reported Back [17, 129]")
         while True:

pyproject.toml

@@ -6,7 +6,7 @@ build-backend = "setuptools.build_meta"
 name = "eive-tmtc"
 description = "TMTC Commander EIVE"
 readme = "README.md"
-version = "5.10.1"
+version = "5.12.1"
 requires-python = ">=3.10"
 license = {text = "Apache-2.0"}
 authors = [