consistency change for enum names

eive_tmtc/pus_tc/cmd_definitions.py

@@ -121,11 +121,11 @@ def add_str_cmds(defs: TmtcDefinitionWrapper):
 
 @tmtc_definitions_provider
 def add_time_cmds(defs: TmtcDefinitionWrapper):
-    from eive_tmtc.pus_tc.system.time import OpCodes, Info
+    from eive_tmtc.pus_tc.system.time import OpCode, Info
 
     oce = OpCodeEntry()
     oce.add(
-        keys=OpCodes.SET_CURRENT_TIME,
+        keys=OpCode.SET_CURRENT_TIME,
         info=Info.SET_CURRENT_TIME,
     )
     defs.add_service(
@@ -141,11 +141,11 @@ def add_system_cmds(defs: TmtcDefinitionWrapper):
 
     oce = OpCodeEntry()
     oce.add(
-        keys=controllers.OpCodes.THERMAL_CONTROLLER,
+        keys=controllers.OpCode.THERMAL_CONTROLLER,
         info=controllers.Info.THERMAL_CONTROLLER,
     )
     oce.add(
-        keys=controllers.OpCodes.CORE_CONTROLLER,
+        keys=controllers.OpCode.CORE_CONTROLLER,
         info=controllers.Info.CORE_CONTROLLER,
     )
     defs.add_service(

eive_tmtc/pus_tc/devs/bpx_batt.py

@@ -15,19 +15,19 @@ from tmtccmd.tc.pus_200_fsfw_modes import pack_mode_data, Modes
 from tmtccmd.tc.pus_200_fsfw_modes import Subservices as ModeSubservices
 
 
-class BpxSetIds:
+class BpxSetId:
     GET_HK_SET = 0
     GET_CFG_SET = 5
 
 
-class BpxActionIds:
+class BpxActionId:
     REBOOT = 2
     RESET_COUNTERS = 3
     SET_CFG = 4
     GET_CFG = 5
 
 
-class BpxOpCodes:
+class BpxOpCode:
     HK = ["0", "hk"]
     OFF = ["off"]
     ON = ["on"]
@@ -40,15 +40,15 @@ class BpxOpCodes:
 @tmtc_definitions_provider
 def add_bpx_cmd_definitions(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=BpxOpCodes.ON, info="On command")
+    oce.add(keys=BpxOpCode.ON, info="On command")
-    oce.add(keys=BpxOpCodes.OFF, info="Off command")
+    oce.add(keys=BpxOpCode.OFF, info="Off command")
-    oce.add(keys=BpxOpCodes.HK, info="Request BPX HK")
+    oce.add(keys=BpxOpCode.HK, info="Request BPX HK")
-    oce.add(keys=BpxOpCodes.RST_BOOT_CNT, info="Reset Boot Count")
+    oce.add(keys=BpxOpCode.RST_BOOT_CNT, info="Reset Boot Count")
-    oce.add(keys=BpxOpCodes.REQUEST_CFG, info="Request Configuration Struct (Step 1)")
+    oce.add(keys=BpxOpCode.REQUEST_CFG, info="Request Configuration Struct (Step 1)")
     oce.add(
-        keys=BpxOpCodes.REQUEST_CFG_HK, info="Request Configuration Struct HK (Step 2)"
+        keys=BpxOpCode.REQUEST_CFG_HK, info="Request Configuration Struct HK (Step 2)"
     )
-    oce.add(keys=BpxOpCodes.REBOOT, info="Reboot Command")
+    oce.add(keys=BpxOpCode.REBOOT, info="Reboot Command")
     defs.add_service(
         name=CustomServiceList.BPX_BATTERY.value,
         info="BPX Battery Handler",
@@ -60,11 +60,11 @@ def add_bpx_cmd_definitions(defs: TmtcDefinitionWrapper):
 def pack_bpx_commands(p: ServiceProviderParams):
     op_code = p.op_code
     q = p.queue_helper
-    if op_code in BpxOpCodes.HK:
+    if op_code in BpxOpCode.HK:
         q.add_log_cmd("Requesting BPX battery HK set")
-        sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetIds.GET_HK_SET)
+        sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetId.GET_HK_SET)
         q.add_pus_tc(generate_one_hk_command(sid=sid))
-    if op_code in BpxOpCodes.OFF:
+    if op_code in BpxOpCode.OFF:
         q.add_log_cmd("Off mode")
         mode_cmd = pack_mode_data(BPX_HANDLER_ID, Modes.OFF, 0)
         q.add_pus_tc(
@@ -74,7 +74,7 @@ def pack_bpx_commands(p: ServiceProviderParams):
                 app_data=mode_cmd,
             )
         )
-    if op_code in BpxOpCodes.ON:
+    if op_code in BpxOpCode.ON:
         q.add_log_cmd("On mode")
         mode_cmd = pack_mode_data(BPX_HANDLER_ID, Modes.ON, 0)
         q.add_pus_tc(
@@ -84,28 +84,26 @@ def pack_bpx_commands(p: ServiceProviderParams):
                 app_data=mode_cmd,
             )
         )
-    if op_code in BpxOpCodes.RST_BOOT_CNT:
+    if op_code in BpxOpCode.RST_BOOT_CNT:
         q.add_log_cmd("Resetting reboot counters")
         q.add_pus_tc(
             make_fsfw_action_cmd(
-                object_id=BPX_HANDLER_ID, action_id=BpxActionIds.RESET_COUNTERS
+                object_id=BPX_HANDLER_ID, action_id=BpxActionId.RESET_COUNTERS
             )
         )
-    if op_code in BpxOpCodes.REQUEST_CFG:
+    if op_code in BpxOpCode.REQUEST_CFG:
         q.add_log_cmd("Requesting configuration struct")
         q.add_pus_tc(
             make_fsfw_action_cmd(
-                object_id=BPX_HANDLER_ID, action_id=BpxActionIds.GET_CFG
+                object_id=BPX_HANDLER_ID, action_id=BpxActionId.GET_CFG
             )
         )
-    if op_code in BpxOpCodes.REQUEST_CFG_HK:
+    if op_code in BpxOpCode.REQUEST_CFG_HK:
         q.add_log_cmd("Requesting configuration struct HK")
-        sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetIds.GET_CFG_SET)
+        sid = make_sid(object_id=BPX_HANDLER_ID, set_id=BpxSetId.GET_CFG_SET)
         q.add_pus_tc(generate_one_hk_command(sid=sid))
-    if op_code in BpxOpCodes.REBOOT:
+    if op_code in BpxOpCode.REBOOT:
         q.add_log_cmd("Rebooting BPX battery")
         q.add_pus_tc(
-            make_fsfw_action_cmd(
+            make_fsfw_action_cmd(object_id=BPX_HANDLER_ID, action_id=BpxActionId.REBOOT)
-                object_id=BPX_HANDLER_ID, action_id=BpxActionIds.REBOOT
-            )
         )

eive_tmtc/pus_tc/devs/gps.py

@@ -11,7 +11,7 @@ from tmtccmd.logging import get_console_logger
 LOGGER = get_console_logger()
 
 
-class OpCodes:
+class OpCode:
     REQ_OS_HK = ["0", "hk-os"]
     RESET_GNSS = ["5", "reset"]
 
@@ -21,15 +21,15 @@ class Info:
     RESET_GNSS = "Reset GNSS using reset pin"
 
 
-class SetIds:
+class SetId:
     HK = 0
 
 
 @tmtc_definitions_provider
 def add_gps_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodes.RESET_GNSS, info=Info.RESET_GNSS)
+    oce.add(keys=OpCode.RESET_GNSS, info=Info.RESET_GNSS)
-    oce.add(keys=OpCodes.REQ_OS_HK, info=Info.REQ_OS_HK)
+    oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
     defs.add_service(
         name=CustomServiceList.GPS_CTRL.value,
         info="GPS/GNSS Controller",
@@ -38,11 +38,11 @@ def add_gps_cmds(defs: TmtcDefinitionWrapper):
 
 
 def pack_gps_command(object_id: bytes, q: DefaultPusQueueHelper, op_code: str):
-    if op_code in OpCodes.RESET_GNSS:
+    if op_code in OpCode.RESET_GNSS:
         # TODO: This needs to be re-implemented
         LOGGER.warning("Reset pin handling needs to be re-implemented")
-    if op_code in OpCodes.REQ_OS_HK:
+    if op_code in OpCode.REQ_OS_HK:
         q.add_log_cmd(f"GMSS: {Info.REQ_OS_HK}")
         q.add_pus_tc(
-            generate_one_hk_command(sid=make_sid(object_id=object_id, set_id=SetIds.HK))
+            generate_one_hk_command(sid=make_sid(object_id=object_id, set_id=SetId.HK))
         )

eive_tmtc/pus_tc/devs/gyros.py

@@ -1,10 +1,10 @@
 import enum
 
 
-class AdisGyroSetIds(enum.IntEnum):
+class AdisGyroSetId(enum.IntEnum):
     CORE_HK = 0
     CFG_HK = 1
 
 
-class L3gGyroSetIds(enum.IntEnum):
+class L3gGyroSetId(enum.IntEnum):
     CORE_HK = 0

eive_tmtc/pus_tc/devs/heater.py

@@ -20,7 +20,7 @@ from tmtccmd.tc.pus_8_funccmd import make_fsfw_action_cmd
 from spacepackets.ecss.tc import PusTelecommand
 
 
-class SwitchNumbers:
+class SwitchNumber(enum.IntEnum):
     HEATER_0_OBC_BRD = 0
     HEATER_1_PLOC_PROC_BRD = 1
     HEATER_2_ACS_BRD = 2
@@ -32,7 +32,7 @@ class SwitchNumbers:
     NUMBER_OF_SWITCHES = 8
 
 
-class OpCodes:
+class OpCode:
     HEATER_CMD = ["0", "switch-cmd"]
     HEATER_EXT_CTRL = ["1", "set-ext-ctrl"]
     HEATER_FAULTY_CMD = ["2", "set-faulty"]
@@ -57,10 +57,10 @@ class ActionIds(enum.IntEnum):
 @tmtc_definitions_provider
 def add_heater_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodes.HEATER_CMD, info=Info.HEATER_CMD)
+    oce.add(keys=OpCode.HEATER_CMD, info=Info.HEATER_CMD)
-    oce.add(keys=OpCodes.HEATER_HEALTHY_CMD, info=Info.HEATER_HEALTHY_CMD)
+    oce.add(keys=OpCode.HEATER_HEALTHY_CMD, info=Info.HEATER_HEALTHY_CMD)
-    oce.add(keys=OpCodes.HEATER_EXT_CTRL, info=Info.HEATER_EXT_CTRL)
+    oce.add(keys=OpCode.HEATER_EXT_CTRL, info=Info.HEATER_EXT_CTRL)
-    oce.add(keys=OpCodes.HEATER_FAULTY_CMD, info=Info.HEATER_FAULTY_CMD)
+    oce.add(keys=OpCode.HEATER_FAULTY_CMD, info=Info.HEATER_FAULTY_CMD)
     defs.add_service(
         name=CustomServiceList.HEATER.value,
         info="Heater Device",
@@ -69,7 +69,7 @@ def add_heater_cmds(defs: TmtcDefinitionWrapper):
 
 
 def pack_heater_cmds(object_id: bytearray, op_code: str, q: DefaultPusQueueHelper):
-    if op_code in OpCodes.HEATER_CMD:
+    if op_code in OpCode.HEATER_CMD:
         q.add_log_cmd("Heater Switching")
         heater_number = prompt_heater()
         while True:
@@ -89,7 +89,7 @@ def pack_heater_cmds(object_id: bytearray, op_code: str, q: DefaultPusQueueHelpe
         debug_string = f"Switching heater {heater_number} {act_str}"
         q.add_log_cmd(debug_string)
         q.add_pus_tc(pack_switch_heater_command(object_id, heater_number, action))
-    if op_code in OpCodes.HEATER_EXT_CTRL:
+    if op_code in OpCode.HEATER_EXT_CTRL:
         heater_number = prompt_heater()
         obj_id = heater_idx_to_obj(heater_number)
         health_cmd(
@@ -99,7 +99,7 @@ def pack_heater_cmds(object_id: bytearray, op_code: str, q: DefaultPusQueueHelpe
             health_str="External Control",
             heater_idx=heater_number,
         )
-    if op_code in OpCodes.HEATER_FAULTY_CMD:
+    if op_code in OpCode.HEATER_FAULTY_CMD:
         heater_number = prompt_heater()
         obj_id = heater_idx_to_obj(heater_number)
         health_cmd(
@@ -109,7 +109,7 @@ def pack_heater_cmds(object_id: bytearray, op_code: str, q: DefaultPusQueueHelpe
             health_str="Faulty",
             heater_idx=heater_number,
         )
-    if op_code in OpCodes.HEATER_HEALTHY_CMD:
+    if op_code in OpCode.HEATER_HEALTHY_CMD:
         heater_number = prompt_heater()
         obj_id = heater_idx_to_obj(heater_number)
         health_cmd(
@@ -165,7 +165,7 @@ def prompt_heater() -> int:
             print("Heater number not a digit")
             continue
         heater_number = int(heater_number)
-        if heater_number >= SwitchNumbers.NUMBER_OF_SWITCHES or heater_number < 0:
+        if heater_number >= SwitchNumber.NUMBER_OF_SWITCHES or heater_number < 0:
             print("Invalid heater switch number")
             continue
         break

eive_tmtc/pus_tc/devs/mgms.py

@@ -1,9 +1,9 @@
 import enum
 
 
-class MgmLis3SetIds(enum.IntEnum):
+class MgmLis3SetId(enum.IntEnum):
     CORE_HK = 0
 
 
-class MgmRm3100SetIds(enum.IntEnum):
+class MgmRm3100SetId(enum.IntEnum):
     CORE_HK = 0

eive_tmtc/pus_tc/devs/pdec_handler.py

@@ -9,7 +9,7 @@ from spacepackets.ecss.tc import PusTelecommand
 from tmtccmd.tc import DefaultPusQueueHelper
 
 
-class CommandIds:
+class CommandId:
     # prints the clcw to the console. Useful for debugging
     PRINT_CLCW = bytearray([0x0, 0x0, 0x0, 0x0])
     # Print PDEC monitor register
@@ -22,9 +22,9 @@ def pack_pdec_handler_test(
     q.add_log_cmd(f"Testing PDEC handler with object id: {object_id.hex()}")
     if op_code == "0":
         q.add_log_cmd("PDEC Handler: Print CLCW")
-        command = object_id + CommandIds.PRINT_CLCW
+        command = object_id + CommandId.PRINT_CLCW
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "1":
         q.add_log_cmd("PDEC Handler: Print PDEC monitor register")
-        command = object_id + CommandIds.PRINT_PDEC_MON
+        command = object_id + CommandId.PRINT_PDEC_MON
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))

eive_tmtc/pus_tc/devs/plpcdu.py

@@ -31,7 +31,7 @@ from eive_tmtc.config.object_ids import PL_PCDU_ID
 LOGGER = get_console_logger()
 
 
-class OpCodes:
+class OpCode:
     SWITCH_HPA_ON_PROC = ["0", "proc_hpa"]
     SWITCH_ON = ["2", "on"]
     SWITCH_OFF = ["3", "off"]
@@ -70,7 +70,7 @@ class Info:
     DISABLE_HK = "Disable HK"
 
 
-class SetIds(enum.IntEnum):
+class SetId(enum.IntEnum):
     ADC = 0
 
 
@@ -124,63 +124,63 @@ class ParamIds(enum.IntEnum):
 @tmtc_definitions_provider
 def add_pl_pcdu_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodes.SWITCH_HPA_ON_PROC, info=Info.SWITCH_HPA_ON_PROC)
+    oce.add(keys=OpCode.SWITCH_HPA_ON_PROC, info=Info.SWITCH_HPA_ON_PROC)
-    oce.add(keys=OpCodes.SWITCH_ON, info=Info.SWITCH_ON)
+    oce.add(keys=OpCode.SWITCH_ON, info=Info.SWITCH_ON)
-    oce.add(keys=OpCodes.SWITCH_OFF, info=Info.SWITCH_OFF)
+    oce.add(keys=OpCode.SWITCH_OFF, info=Info.SWITCH_OFF)
-    oce.add(keys=OpCodes.NORMAL_SSR, info=Info.NORMAL_SSR)
+    oce.add(keys=OpCode.NORMAL_SSR, info=Info.NORMAL_SSR)
-    oce.add(keys=OpCodes.NORMAL_DRO, info=Info.NORMAL_DRO)
+    oce.add(keys=OpCode.NORMAL_DRO, info=Info.NORMAL_DRO)
-    oce.add(keys=OpCodes.NORMAL_X8, info=Info.NORMAL_X8)
+    oce.add(keys=OpCode.NORMAL_X8, info=Info.NORMAL_X8)
-    oce.add(keys=OpCodes.NORMAL_TX, info=Info.NORMAL_TX)
+    oce.add(keys=OpCode.NORMAL_TX, info=Info.NORMAL_TX)
-    oce.add(keys=OpCodes.NORMAL_MPA, info=Info.NORMAL_MPA)
+    oce.add(keys=OpCode.NORMAL_MPA, info=Info.NORMAL_MPA)
-    oce.add(keys=OpCodes.NORMAL_HPA, info=Info.NORMAL_HPA)
+    oce.add(keys=OpCode.NORMAL_HPA, info=Info.NORMAL_HPA)
-    oce.add(keys=OpCodes.REQ_OS_HK, info=Info.REQ_OS_HK)
+    oce.add(keys=OpCode.REQ_OS_HK, info=Info.REQ_OS_HK)
-    oce.add(keys=OpCodes.ENABLE_HK, info=Info.ENABLE_HK)
+    oce.add(keys=OpCode.ENABLE_HK, info=Info.ENABLE_HK)
     oce.add(
-        keys=OpCodes.INJECT_SSR_TO_DRO_FAILURE,
+        keys=OpCode.INJECT_SSR_TO_DRO_FAILURE,
         info="Inject failure SSR to DRO transition",
     )
     oce.add(
-        keys=OpCodes.INJECT_DRO_TO_X8_FAILURE,
+        keys=OpCode.INJECT_DRO_TO_X8_FAILURE,
         info="Inject failure in DRO to X8 transition",
     )
     oce.add(
-        keys=OpCodes.INJECT_X8_TO_TX_FAILURE,
+        keys=OpCode.INJECT_X8_TO_TX_FAILURE,
         info="Inject failure in X8 to TX transition",
     )
     oce.add(
-        keys=OpCodes.INJECT_TX_TO_MPA_FAILURE,
+        keys=OpCode.INJECT_TX_TO_MPA_FAILURE,
         info="Inject failure in TX to MPA transition",
     )
     oce.add(
-        keys=OpCodes.INJECT_MPA_TO_HPA_FAILURE,
+        keys=OpCode.INJECT_MPA_TO_HPA_FAILURE,
         info="Inject failure in MPA to HPA transition",
     )
-    oce.add(keys=OpCodes.INJECT_ALL_ON_FAILURE, info="Inject failure in all on mode")
+    oce.add(keys=OpCode.INJECT_ALL_ON_FAILURE, info="Inject failure in all on mode")
     defs.add_service(CustomServiceList.PL_PCDU.value, "PL PCDU", oce)
 
 
 def pack_pl_pcdu_commands(q: DefaultPusQueueHelper, op_code: str):
-    if op_code in OpCodes.SWITCH_ON:
+    if op_code in OpCode.SWITCH_ON:
         pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_ON, mode=Modes.ON, submode=0)
-    if op_code in OpCodes.SWITCH_OFF:
+    if op_code in OpCode.SWITCH_OFF:
         pack_pl_pcdu_mode_cmd(q=q, info=Info.SWITCH_OFF, mode=Modes.OFF, submode=0)
-    if op_code in OpCodes.ENABLE_HK:
+    if op_code in OpCode.ENABLE_HK:
         interval = float(
             input("Please enter HK collection interval in floating point seconds: ")
         )
         cmds = enable_periodic_hk_command_with_interval(
-            diag=True, sid=make_sid(PL_PCDU_ID, SetIds.ADC), interval_seconds=interval
+            diag=True, sid=make_sid(PL_PCDU_ID, SetId.ADC), interval_seconds=interval
         )
         q.add_log_cmd(f"Enable PL PCDU HK with interval of {interval} seconds")
         for cmd in cmds:
             q.add_pus_tc(cmd)
-    if op_code in OpCodes.DISABLE_HK:
+    if op_code in OpCode.DISABLE_HK:
         cmd = disable_periodic_hk_command(
-            diag=True, sid=make_sid(PL_PCDU_ID, SetIds.ADC)
+            diag=True, sid=make_sid(PL_PCDU_ID, SetId.ADC)
         )
         q.add_log_cmd("Disabling PL PCDU HK")
         q.add_pus_tc(cmd)
-    if op_code in OpCodes.NORMAL_SSR:
+    if op_code in OpCode.NORMAL_SSR:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_SSR,
@@ -189,51 +189,51 @@ def pack_pl_pcdu_commands(q: DefaultPusQueueHelper, op_code: str):
                 NormalSubmodesMask.SOLID_STATE_RELAYS_ADC_ON
             ),
         )
-    if op_code in OpCodes.NORMAL_DRO:
+    if op_code in OpCode.NORMAL_DRO:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_DRO,
             mode=Modes.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.DRO_ON),
         )
-    if op_code in OpCodes.NORMAL_X8:
+    if op_code in OpCode.NORMAL_X8:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_X8,
             mode=Modes.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.X8_ON),
         )
-    if op_code in OpCodes.NORMAL_TX:
+    if op_code in OpCode.NORMAL_TX:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_TX,
             mode=Modes.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.TX_ON),
         )
-    if op_code in OpCodes.NORMAL_MPA:
+    if op_code in OpCode.NORMAL_MPA:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_MPA,
             mode=Modes.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.MPA_ON),
         )
-    if op_code in OpCodes.NORMAL_HPA:
+    if op_code in OpCode.NORMAL_HPA:
         pack_pl_pcdu_mode_cmd(
             q=q,
             info=Info.NORMAL_HPA,
             mode=Modes.NORMAL,
             submode=submode_mask_to_submode(NormalSubmodesMask.HPA_ON),
         )
-    if op_code in OpCodes.REQ_OS_HK:
+    if op_code in OpCode.REQ_OS_HK:
         q.add_log_cmd(f"PL PCDU: {Info.REQ_OS_HK}")
         q.add_pus_tc(
             generate_one_diag_command(
-                sid=make_sid(object_id=PL_PCDU_ID, set_id=SetIds.ADC)
+                sid=make_sid(object_id=PL_PCDU_ID, set_id=SetId.ADC)
             )
         )
-    if op_code in OpCodes.SWITCH_HPA_ON_PROC:
+    if op_code in OpCode.SWITCH_HPA_ON_PROC:
         hpa_on_procedure(q)
-    if op_code in OpCodes.INJECT_ALL_ON_FAILURE:
+    if op_code in OpCode.INJECT_ALL_ON_FAILURE:
         pack_failure_injection_cmd(
             q=q,
             param_id=ParamIds.INJECT_ALL_ON_FAILURE,

eive_tmtc/pus_tc/devs/rad_sensor.py

@@ -18,11 +18,11 @@ from tmtccmd.tc.pus_3_fsfw_hk import generate_one_hk_command, make_sid
 from tmtccmd.util import ObjectIdU32
 
 
-class SetIds:
+class SetId:
     HK = 3
 
 
-class OpCodes:
+class OpCode:
     ON = ["0", "on"]
     NORMAL = ["1", "normal"]
     OFF = ["2", "off"]
@@ -40,7 +40,7 @@ class Info:
     DEBUG_OFF = "Switch debug output off"
 
 
-class CommandIds:
+class CommandId:
     START_CONVERSIONS = 2
     READ_CONVERSIONS = 3
     ENABLE_DEBUG_OUTPUT = 4
@@ -50,12 +50,12 @@ class CommandIds:
 @tmtc_definitions_provider
 def add_rad_sens_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(info=Info.ON, keys=OpCodes.ON)
+    oce.add(info=Info.ON, keys=OpCode.ON)
-    oce.add(info=Info.OFF, keys=OpCodes.OFF)
+    oce.add(info=Info.OFF, keys=OpCode.OFF)
-    oce.add(info=Info.NORMAL, keys=OpCodes.NORMAL)
+    oce.add(info=Info.NORMAL, keys=OpCode.NORMAL)
-    oce.add(info=Info.REQ_OS_HK, keys=OpCodes.REQ_HK_ONCE)
+    oce.add(info=Info.REQ_OS_HK, keys=OpCode.REQ_HK_ONCE)
-    oce.add(info=Info.DEBUG_ON, keys=OpCodes.DEBUG_ON)
+    oce.add(info=Info.DEBUG_ON, keys=OpCode.DEBUG_ON)
-    oce.add(info=Info.DEBUG_OFF, keys=OpCodes.DEBUG_OFF)
+    oce.add(info=Info.DEBUG_OFF, keys=OpCode.DEBUG_OFF)
     defs.add_service(
         name=CustomServiceList.RAD_SENSOR.value,
         info="Radiation Sensor",
@@ -68,26 +68,24 @@ def pack_rad_sensor_test_into(
 ):
     q.add_log_cmd(f"Commanding Radiation sensor handler {object_id}")
 
-    if op_code in OpCodes.ON:
+    if op_code in OpCode.ON:
         rad_sensor_mode_cmd(object_id, Modes.ON, Info.ON, q)
-    if op_code in OpCodes.NORMAL:
+    if op_code in OpCode.NORMAL:
         rad_sensor_mode_cmd(object_id, Modes.NORMAL, Info.NORMAL, q)
-    if op_code in OpCodes.OFF:
+    if op_code in OpCode.OFF:
         rad_sensor_mode_cmd(object_id, Modes.OFF, Info.OFF, q)
-    if op_code in OpCodes.REQ_HK_ONCE:
+    if op_code in OpCode.REQ_HK_ONCE:
         q.add_log_cmd(f"Rad sensor: {Info.REQ_OS_HK}")
         q.add_pus_tc(
-            generate_one_hk_command(sid=make_sid(object_id.as_bytes, set_id=SetIds.HK))
+            generate_one_hk_command(sid=make_sid(object_id.as_bytes, set_id=SetId.HK))
         )
-    if op_code in OpCodes.DEBUG_ON:
+    if op_code in OpCode.DEBUG_ON:
         q.add_log_cmd(f"Rad sensor: {Info.DEBUG_ON}")
-        command = object_id.as_bytes + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
+        command = object_id.as_bytes + struct.pack("!I", CommandId.ENABLE_DEBUG_OUTPUT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
-    if op_code in OpCodes.DEBUG_OFF:
+    if op_code in OpCode.DEBUG_OFF:
         q.add_log_cmd(f"Rad sensor: {Info.DEBUG_OFF}")
-        command = object_id.as_bytes + struct.pack(
+        command = object_id.as_bytes + struct.pack("!I", CommandId.DISABLE_DEBUG_OUTPUT)
-            "!I", CommandIds.DISABLE_DEBUG_OUTPUT
-        )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
 

eive_tmtc/pus_tc/devs/rtd.py

@@ -1,7 +1,7 @@
 from typing import Optional
 
 from eive_tmtc.config.definitions import CustomServiceList
-from eive_tmtc.pus_tc.devs.pdec_handler import CommandIds
+from eive_tmtc.pus_tc.devs.pdec_handler import CommandId
 from spacepackets.ecss import PusTelecommand
 from tmtccmd.config import TmtcDefinitionWrapper, OpCodeEntry
 from tmtccmd.config.tmtc import tmtc_definitions_provider
@@ -32,7 +32,7 @@ RTD_IDS = [
 ]
 
 
-class OpCodes:
+class OpCode:
     ON = ["0", "on"]
     OFF = ["1", "off"]
     NORMAL = ["2", "normal"]
@@ -49,9 +49,9 @@ class Info:
 @tmtc_definitions_provider
 def specify_rtd_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodes.ON, info=Info.ON)
+    oce.add(keys=OpCode.ON, info=Info.ON)
-    oce.add(keys=OpCodes.NORMAL, info=Info.NORMAL)
+    oce.add(keys=OpCode.NORMAL, info=Info.NORMAL)
-    oce.add(keys=OpCodes.OFF, info=Info.OFF)
+    oce.add(keys=OpCode.OFF, info=Info.OFF)
     defs.add_service(
         name=CustomServiceList.RTD.value, info="RTD commands", op_code_entry=oce
     )
@@ -67,7 +67,7 @@ def pack_rtd_commands(
         tgt_rtd_idx = prompt_rtd_idx()
         object_id_dict = get_object_ids()
         object_id = object_id_dict.get(RTD_IDS[tgt_rtd_idx])
-    if op_code in OpCodes.ON:
+    if op_code in OpCode.ON:
         app_data = pack_mode_data(
             object_id=object_id.as_bytes, mode=Modes.ON, submode=0
         )
@@ -76,7 +76,7 @@ def pack_rtd_commands(
                 service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=app_data
             )
         )
-    if op_code in OpCodes.NORMAL:
+    if op_code in OpCode.NORMAL:
         app_data = pack_mode_data(
             object_id=object_id.as_bytes, mode=Modes.NORMAL, submode=0
         )
@@ -85,7 +85,7 @@ def pack_rtd_commands(
                 service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=app_data
             )
         )
-    if op_code in OpCodes.OFF:
+    if op_code in OpCode.OFF:
         app_data = pack_mode_data(
             object_id=object_id.as_bytes, mode=Modes.OFF, submode=0
         )
@@ -94,8 +94,8 @@ def pack_rtd_commands(
                 service=200, subservice=Subservices.TC_MODE_COMMAND, app_data=app_data
             )
         )
-    if op_code in OpCodes.CONFIG_CMD:
+    if op_code in OpCode.CONFIG_CMD:
-        command = object_id.as_bytes + CommandIds.PRINT_CLCW
+        command = object_id.as_bytes + CommandId.PRINT_CLCW
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
 

eive_tmtc/pus_tc/devs/scex.py

@@ -16,7 +16,7 @@ from eive_tmtc.config.object_ids import SCEX_HANDLER_ID
 USE_SCEX_CONF_FILE = True
 
 
-class OpCodes:
+class OpCode:
     PING = ["0", "ping"]
     ION_CMD = ["1", "ion"]
     TEMP_CMD = ["2", "temp"]
@@ -30,7 +30,7 @@ class OpCodes:
     SWITCH_OFF = ["8", "off"]
 
 
-class ActionIds(enum.IntEnum):
+class ActionId(enum.IntEnum):
     PING = 7
     ION_CMD = 4
     TEMP_CMD = 3
@@ -58,16 +58,16 @@ class Info:
 @tmtc_definitions_provider
 def add_scex_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodes.PING, info=Info.PING)
+    oce.add(keys=OpCode.PING, info=Info.PING)
-    oce.add(keys=OpCodes.ION_CMD, info=Info.ION_CMD)
+    oce.add(keys=OpCode.ION_CMD, info=Info.ION_CMD)
-    oce.add(keys=OpCodes.TEMP_CMD, info=Info.TEMP_CMD)
+    oce.add(keys=OpCode.TEMP_CMD, info=Info.TEMP_CMD)
-    oce.add(keys=OpCodes.EXP_STATUS_CMD, info=Info.EXP_STATUS_CMD)
+    oce.add(keys=OpCode.EXP_STATUS_CMD, info=Info.EXP_STATUS_CMD)
-    oce.add(keys=OpCodes.ONE_CELLS_CMD, info=Info.ONE_CELLS_CMD)
+    oce.add(keys=OpCode.ONE_CELLS_CMD, info=Info.ONE_CELLS_CMD)
 
-    oce.add(keys=OpCodes.ALL_CELLS_CMD, info=Info.ALL_CELLS_CMD)
+    oce.add(keys=OpCode.ALL_CELLS_CMD, info=Info.ALL_CELLS_CMD)
-    oce.add(keys=OpCodes.FRAM, info=Info.FRAM)
+    oce.add(keys=OpCode.FRAM, info=Info.FRAM)
-    oce.add(keys=OpCodes.SWITCH_ON, info=Info.SWITCH_ON)
+    oce.add(keys=OpCode.SWITCH_ON, info=Info.SWITCH_ON)
-    oce.add(keys=OpCodes.SWITCH_OFF, info=Info.SWITCH_OFF)
+    oce.add(keys=OpCode.SWITCH_OFF, info=Info.SWITCH_OFF)
 
     defs.add_service(
         name=CustomServiceList.SCEX.value, info="SCEX Device", op_code_entry=oce
@@ -78,7 +78,7 @@ def add_scex_cmds(defs: TmtcDefinitionWrapper):
 def pack_scex_cmds(p: ServiceProviderParams):
     op_code = p.op_code
     q = p.queue_helper
-    if op_code in OpCodes.SWITCH_ON:
+    if op_code in OpCode.SWITCH_ON:
         q.add_log_cmd(Info.SWITCH_ON)
         q.add_pus_tc(
             PusTelecommand(
@@ -87,7 +87,7 @@ def pack_scex_cmds(p: ServiceProviderParams):
                 app_data=pack_mode_data(SCEX_HANDLER_ID, Modes.ON, 0),
             )
         )
-    if op_code in OpCodes.SWITCH_OFF:
+    if op_code in OpCode.SWITCH_OFF:
         q.add_log_cmd(Info.SWITCH_OFF)
         q.add_pus_tc(
             PusTelecommand(
@@ -96,30 +96,28 @@ def pack_scex_cmds(p: ServiceProviderParams):
                 app_data=pack_mode_data(SCEX_HANDLER_ID, Modes.OFF, 0),
             )
         )
-    if op_code in OpCodes.PING:
+    if op_code in OpCode.PING:
         q.add_log_cmd(Info.PING)
         app_data = bytes([0])
-        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.PING, app_data))
+        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.PING, app_data))
-    if op_code in OpCodes.ION_CMD:
+    if op_code in OpCode.ION_CMD:
         q.add_log_cmd(Info.ION_CMD)
         app_data = bytes([0])
-        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.ION_CMD, app_data))
+        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.ION_CMD, app_data))
-    if op_code in OpCodes.TEMP_CMD:
+    if op_code in OpCode.TEMP_CMD:
         q.add_log_cmd(Info.TEMP_CMD)
         app_data = bytes([0])
-        q.add_pus_tc(
+        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.TEMP_CMD, app_data))
-            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.TEMP_CMD, app_data)
-        )
 
-    if op_code in OpCodes.EXP_STATUS_CMD:
+    if op_code in OpCode.EXP_STATUS_CMD:
         q.add_log_cmd(Info.EXP_STATUS_CMD)
         app_data = bytes([0])
         q.add_pus_tc(
-            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.EXP_STATUS_CMD, app_data)
+            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.EXP_STATUS_CMD, app_data)
         )
 
     # one cell
-    if op_code in OpCodes.ONE_CELLS_CMD:
+    if op_code in OpCode.ONE_CELLS_CMD:
         q.add_log_cmd(Info.ONE_CELLS_CMD)
         app_data = bytearray([0])
 
@@ -164,10 +162,10 @@ def pack_scex_cmds(p: ServiceProviderParams):
         app_data.append(dac_weight3[cn])
 
         q.add_pus_tc(
-            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.ONE_CELLS_CMD, app_data)
+            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.ONE_CELLS_CMD, app_data)
         )
 
-    if op_code in OpCodes.ALL_CELLS_CMD:
+    if op_code in OpCode.ALL_CELLS_CMD:
         q.add_log_cmd(Info.ALL_CELLS_CMD)
         app_data = bytearray([0])
 
@@ -196,13 +194,13 @@ def pack_scex_cmds(p: ServiceProviderParams):
         app_data.append(dac_weight3[cn])
 
         q.add_pus_tc(
-            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.ALL_CELLS_CMD, app_data)
+            make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.ALL_CELLS_CMD, app_data)
         )
 
-    if op_code in OpCodes.FRAM:
+    if op_code in OpCode.FRAM:
         q.add_log_cmd(Info.FRAM)
         app_data = bytes([0])
-        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionIds.FRAM, app_data))
+        q.add_pus_tc(make_fsfw_action_cmd(SCEX_HANDLER_ID, ActionId.FRAM, app_data))
 
 
 def append_16_bit_val(packet: bytearray, val: int):

eive_tmtc/pus_tc/devs/star_tracker.py

@@ -5,6 +5,7 @@
 @author J. Meier
 @date   14.08.2021
 """
+import enum
 import struct
 
 from spacepackets.ecss.tc import PusTelecommand
@@ -19,7 +20,7 @@ from eive_tmtc.utility.input_helper import InputHelper
 LOGGER = get_console_logger()
 
 
-class StarTrackerActionIds:
+class StarTrackerActionId(enum.IntEnum):
     PING = 0
     BOOT = 1
     REQ_VERSION = 2
@@ -183,57 +184,57 @@ def pack_star_tracker_commands(
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
     if op_code == "5":
         q.add_log_cmd("Star tracker: Ping")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.PING)
+        data = obyt + struct.pack("!I", StarTrackerActionId.PING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "6":
         q.add_log_cmd("Star tracker:  Switch to bootloader program")
         data = obyt + struct.pack(
-            "!I", StarTrackerActionIds.SWITCH_TO_BOOTLOADER_PROGRAM
+            "!I", StarTrackerActionId.SWITCH_TO_BOOTLOADER_PROGRAM
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "7":
         q.add_log_cmd("Star tracker: Temperature request")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_TEMPERATURE)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TEMPERATURE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "8":
         q.add_log_cmd("Star tracker: Request version")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_VERSION)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_VERSION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "9":
         q.add_log_cmd("Star tracker: Request interface")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_INTERFACE)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_INTERFACE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "10":
         q.add_log_cmd("Star tracker: Request power")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_POWER)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_POWER)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "11":
         q.add_log_cmd("Star tracker: Set subscription parameters")
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.SUBSCRIPTION)
+            + struct.pack("!I", StarTrackerActionId.SUBSCRIPTION)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "12":
         q.add_log_cmd("Star tracker: Boot")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.BOOT)
+        data = obyt + struct.pack("!I", StarTrackerActionId.BOOT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "13":
         q.add_log_cmd("Star tracker: Request time")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_TIME)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TIME)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "14":
         q.add_log_cmd("Star tracker: Request solution")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_SOLUTION)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SOLUTION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "15":
         q.add_log_cmd("Star tracker: Upload image")
         image = get_upload_image()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.UPLOAD_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.UPLOAD_IMAGE)
             + bytearray(image, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -244,7 +245,7 @@ def pack_star_tracker_commands(
             path = FileDefs.download_path
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_IMAGE)
             + bytearray(path, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -253,7 +254,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.LIMITS)
+            + struct.pack("!I", StarTrackerActionId.LIMITS)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -262,7 +263,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.TRACKING)
+            + struct.pack("!I", StarTrackerActionId.TRACKING)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -271,7 +272,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.MOUNTING)
+            + struct.pack("!I", StarTrackerActionId.MOUNTING)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -280,7 +281,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CAMERA)
+            + struct.pack("!I", StarTrackerActionId.CAMERA)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -289,7 +290,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CENTROIDING)
+            + struct.pack("!I", StarTrackerActionId.CENTROIDING)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -298,7 +299,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.LISA)
+            + struct.pack("!I", StarTrackerActionId.LISA)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -307,7 +308,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.MATCHING)
+            + struct.pack("!I", StarTrackerActionId.MATCHING)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -316,7 +317,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.VALIDATION)
+            + struct.pack("!I", StarTrackerActionId.VALIDATION)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -325,7 +326,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.ALGO)
+            + struct.pack("!I", StarTrackerActionId.ALGO)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -334,37 +335,37 @@ def pack_star_tracker_commands(
         actionid = int(input("Specify parameter ID (take image - 4): "))
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.TAKE_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.TAKE_IMAGE)
             + struct.pack("!B", actionid)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "28":
         q.add_log_cmd("Star tracker: Stop str helper")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.STOP_STR_HELPER)
+        data = obyt + struct.pack("!I", StarTrackerActionId.STOP_STR_HELPER)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "30":
         q.add_log_cmd("Star tracker: Set name of download image")
         filename = input("Specify download image name: ")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CHANGE_DOWNLOAD_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.CHANGE_DOWNLOAD_IMAGE)
             + bytearray(filename, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "31":
         q.add_log_cmd("Star tracker: Request histogram")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_HISTOGRAM)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_HISTOGRAM)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "32":
         q.add_log_cmd("Star tracker: Request contrast")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_CONTRAST)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_CONTRAST)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "33":
         q.add_log_cmd("Star tracker: Set json filename")
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.SET_JSON_FILE_NAME)
+            + struct.pack("!I", StarTrackerActionId.SET_JSON_FILE_NAME)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -377,7 +378,7 @@ def pack_star_tracker_commands(
         filename = input("Specify filename: ")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.SET_FLASH_READ_FILENAME)
+            + struct.pack("!I", StarTrackerActionId.SET_FLASH_READ_FILENAME)
             + bytearray(filename, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -390,7 +391,7 @@ def pack_star_tracker_commands(
         unix_time = 1640783543
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.SET_TIME)
+            + struct.pack("!I", StarTrackerActionId.SET_TIME)
             + struct.pack("!Q", unix_time)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -399,7 +400,7 @@ def pack_star_tracker_commands(
         id = 0
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_CENTROID)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_CENTROID)
             + struct.pack("!B", id)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -408,7 +409,7 @@ def pack_star_tracker_commands(
         id = 0
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_MATCHED_STAR)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_MATCHED_STAR)
             + struct.pack("!B", id)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -417,7 +418,7 @@ def pack_star_tracker_commands(
         id = 0
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_DBIMAGE)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_DBIMAGE)
             + struct.pack("!B", id)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -427,7 +428,7 @@ def pack_star_tracker_commands(
         type = 1  # 0 - normal, 1 - fast
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_BLOBPIXEL)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_BLOBPIXEL)
             + struct.pack("!B", id)
             + struct.pack("!B", type)
         )
@@ -438,7 +439,7 @@ def pack_star_tracker_commands(
         length = int(input("Size to download: "))
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DOWNLOAD_FPGA_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.DOWNLOAD_FPGA_IMAGE)
             + struct.pack("!I", position)
             + struct.pack("!I", length)
             + bytearray(FileDefs.downloadFpgaImagePath, "utf-8")
@@ -448,7 +449,7 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Change donwload FPGA image file name")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CHANGE_FPGA_DOWNLOAD_FILE)
+            + struct.pack("!I", StarTrackerActionId.CHANGE_FPGA_DOWNLOAD_FILE)
             + bytearray(FileDefs.downloadFpgaImageName, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -456,7 +457,7 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: Upload FPGA image")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.UPLOAD_FPGA_IMAGE)
+            + struct.pack("!I", StarTrackerActionId.UPLOAD_FPGA_IMAGE)
             + bytearray(FileDefs.uploadFpgaImageName, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -465,28 +466,28 @@ def pack_star_tracker_commands(
         id = 3
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.FPGA_ACTION)
+            + struct.pack("!I", StarTrackerActionId.FPGA_ACTION)
             + struct.pack("!B", id)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "48":
         q.add_log_cmd("Star tracker: Unlock")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.UNLOCK)
+        data = obyt + struct.pack("!I", StarTrackerActionId.UNLOCK)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "49":
         q.add_log_cmd("Star tracker: Request camera parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_CAMERA_PARAMS)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_CAMERA_PARAMS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "50":
         q.add_log_cmd("Star tracker: Request limits")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_LIMITS)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LIMITS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "51":
         q.add_log_cmd("Star tracker: Set image processor parameters")
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.IMAGE_PROCESSOR)
+            + struct.pack("!I", StarTrackerActionId.IMAGE_PROCESSOR)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -494,7 +495,7 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: EGSE load ground config camera parameters")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CAMERA)
+            + struct.pack("!I", StarTrackerActionId.CAMERA)
             + bytearray(FileDefs.egse_ground_config, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -502,64 +503,64 @@ def pack_star_tracker_commands(
         q.add_log_cmd("Star tracker: EGSE load flight config camera parameters")
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.CAMERA)
+            + struct.pack("!I", StarTrackerActionId.CAMERA)
             + bytearray(FileDefs.egse_flight_config, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "54":
         q.add_log_cmd("Star tracker: Request log level parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_LOG_LEVEL)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LOG_LEVEL)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "55":
         q.add_log_cmd("Star tracker: Request mounting parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_MOUNTING)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_MOUNTING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "56":
         q.add_log_cmd("Star tracker: Request image processor parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_IMAGE_PROCESSOR)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_IMAGE_PROCESSOR)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "57":
         q.add_log_cmd("Star tracker: Request centroiding parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_CENTROIDING)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_CENTROIDING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "58":
         q.add_log_cmd("Star tracker: Request lisa parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_LISA)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LISA)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "59":
         q.add_log_cmd("Star tracker: Request matching parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_MATCHING)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_MATCHING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "60":
         q.add_log_cmd("Star tracker: Request tracking parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_TRACKING)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_TRACKING)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "61":
         q.add_log_cmd("Star tracker: Request validation parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_VALIDATION)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_VALIDATION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "62":
         q.add_log_cmd("Star tracker: Request algo parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_ALGO)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_ALGO)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "63":
         q.add_log_cmd("Star tracker: Request subscription parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_SUBSCRIPTION)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_SUBSCRIPTION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "64":
         q.add_log_cmd("Star tracker: Request log subscription parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_LOG_SUBSCRIPTION)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_LOG_SUBSCRIPTION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "65":
         q.add_log_cmd("Star tracker: Request debug camera parameters")
-        data = obyt + struct.pack("!I", StarTrackerActionIds.REQ_DEBUG_CAMERA)
+        data = obyt + struct.pack("!I", StarTrackerActionId.REQ_DEBUG_CAMERA)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "66":
         q.add_log_cmd("Star tracker: Set log level parameters")
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.LOGLEVEL)
+            + struct.pack("!I", StarTrackerActionId.LOGLEVEL)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -569,7 +570,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.LOG_SUBSCRIPTION)
+            + struct.pack("!I", StarTrackerActionId.LOG_SUBSCRIPTION)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -578,7 +579,7 @@ def pack_star_tracker_commands(
         json_file = get_config_file()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.DEBUG_CAMERA)
+            + struct.pack("!I", StarTrackerActionId.DEBUG_CAMERA)
             + bytearray(json_file, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
@@ -587,20 +588,20 @@ def pack_star_tracker_commands(
         firmware = get_firmware()
         data = (
             obyt
-            + struct.pack("!I", StarTrackerActionIds.FIRMWARE_UPDATE)
+            + struct.pack("!I", StarTrackerActionId.FIRMWARE_UPDATE)
             + bytearray(firmware, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "70":
         q.add_log_cmd("Star tracker: Disable timestamp generation")
         command = obyt + struct.pack(
-            "!I", StarTrackerActionIds.DISBALE_TIMESTAMP_GENERATION
+            "!I", StarTrackerActionId.DISBALE_TIMESTAMP_GENERATION
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "71":
         q.add_log_cmd("Star tracker: Enable timestamp generation")
         command = obyt + struct.pack(
-            "!I", StarTrackerActionIds.ENABLE_TIMESTAMP_GENERATION
+            "!I", StarTrackerActionId.ENABLE_TIMESTAMP_GENERATION
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
@@ -613,7 +614,7 @@ def pack_read_command(object_id: bytes) -> bytearray:
         path = FileDefs.download_path
     data = (
         object_id
-        + struct.pack("!I", StarTrackerActionIds.FLASH_READ)
+        + struct.pack("!I", StarTrackerActionId.FLASH_READ)
         + struct.pack("!B", start_region)
         + struct.pack("!I", size)
         + bytearray(path, "utf-8")
@@ -627,7 +628,7 @@ def pack_checksum_command(object_id: bytes) -> bytearray:
     size = PartitionSize.STAR_TRACKER_FIRMWARE
     data = (
         object_id
-        + struct.pack("!I", StarTrackerActionIds.CHECKSUM)
+        + struct.pack("!I", StarTrackerActionId.CHECKSUM)
         + struct.pack("!B", start_region)
         + struct.pack("!I", address)
         + struct.pack("!I", size)

eive_tmtc/pus_tc/devs/sus.py

@@ -1,2 +1,2 @@
-class SetIds:
+class SetId:
     HK = 3

eive_tmtc/pus_tc/devs/syrlinks_hk_handler.py

@@ -5,6 +5,8 @@
 @author J. Meier
 @date   13.12.2020
 """
+import enum
+
 from eive_tmtc.config.definitions import CustomServiceList
 from tmtccmd.config.tmtc import (
     tmtc_definitions_provider,
@@ -20,12 +22,12 @@ import struct
 from tmtccmd.util import ObjectIdU32
 
 
-class SetIds:
+class SetId:
     RX_REGISTERS_DATASET = 1
     TX_REGISTERS_DATASET = 2
 
 
-class OpCodes:
+class OpCode:
     OFF = "off"
     ON = "on"
     NORMAL = "nml"
@@ -46,7 +48,7 @@ class Info:
     SET_CW = "Set TX carrier wave"
 
 
-class CommandIds:
+class CommandId(enum.IntEnum):
     READ_RX_STATUS_REGISTERS = 2
     SET_TX_MODE_STANDBY = 3
     SET_TX_MODE_MODULATION = 4
@@ -67,16 +69,16 @@ class CommandIds:
 @tmtc_definitions_provider
 def add_syrlinks_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, "Syrlinks Handler: Set mode off")
+    oce.add(OpCode.OFF, "Syrlinks Handler: Set mode off")
-    oce.add(OpCodes.ON, "Syrlinks Handler: Set mode on")
+    oce.add(OpCode.ON, "Syrlinks Handler: Set mode on")
-    oce.add(OpCodes.NORMAL, "Syrlinks Handler: Set mode normal")
+    oce.add(OpCode.NORMAL, "Syrlinks Handler: Set mode normal")
-    oce.add(OpCodes.STANDBY, "Syrlinks Handler: Set TX standby")
+    oce.add(OpCode.STANDBY, "Syrlinks Handler: Set TX standby")
-    oce.add(OpCodes.MODULATION, "Syrlinks Handler: Set TX modulation")
+    oce.add(OpCode.MODULATION, "Syrlinks Handler: Set TX modulation")
-    oce.add(OpCodes.HK_RX_REGS, Info.HK_RX_REGS)
+    oce.add(OpCode.HK_RX_REGS, Info.HK_RX_REGS)
-    oce.add(OpCodes.HK_TX_REGS, Info.HK_TX_REGS)
+    oce.add(OpCode.HK_TX_REGS, Info.HK_TX_REGS)
-    oce.add(OpCodes.SET_CW, Info.SET_CW)
+    oce.add(OpCode.SET_CW, Info.SET_CW)
-    oce.add(OpCodes.TX_STATUS, Info.TX_STATUS)
+    oce.add(OpCode.TX_STATUS, Info.TX_STATUS)
-    oce.add(OpCodes.RX_STATUS, Info.RX_STATUS)
+    oce.add(OpCode.RX_STATUS, Info.RX_STATUS)
     oce.add("7", "Syrlinks Handler: Read TX waveform")
     oce.add("8", "Syrlinks Handler: Read TX AGC value high byte")
     oce.add("9", "Syrlinks Handler: Read TX AGC value low byte")
@@ -96,83 +98,83 @@ def pack_syrlinks_command(
     obyt = object_id.as_bytes
     prefix = "Syrlinks"
     q.add_log_cmd(f"Testing Syrlinks with object id: {object_id.as_hex_string}")
-    if op_code == OpCodes.OFF:
+    if op_code == OpCode.OFF:
         q.add_log_cmd(f"{prefix}: Set mode off")
         data = pack_mode_data(obyt, Modes.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.ON:
+    if op_code == OpCode.ON:
         q.add_log_cmd(f"{prefix}: Set mode on")
         data = pack_mode_data(obyt, Modes.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.NORMAL:
+    if op_code == OpCode.NORMAL:
         q.add_log_cmd(f"{prefix}: Mode Normal")
         data = pack_mode_data(obyt, Modes.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code == OpCodes.STANDBY:
+    if op_code == OpCode.STANDBY:
         q.add_log_cmd(f"{prefix}: Set TX mode standby")
-        data = obyt + struct.pack("!I", CommandIds.SET_TX_MODE_STANDBY)
+        data = obyt + struct.pack("!I", CommandId.SET_TX_MODE_STANDBY)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code == OpCodes.MODULATION:
+    if op_code == OpCode.MODULATION:
         q.add_log_cmd(f"{prefix}: Set TX mode modulation")
-        data = obyt + struct.pack("!I", CommandIds.SET_TX_MODE_MODULATION)
+        data = obyt + struct.pack("!I", CommandId.SET_TX_MODE_MODULATION)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.SET_CW:
+    if op_code in OpCode.SET_CW:
         q.add_log_cmd(f"{prefix}: {Info.SET_CW}")
-        data = obyt + struct.pack("!I", CommandIds.SET_TX_MODE_CW)
+        data = obyt + struct.pack("!I", CommandId.SET_TX_MODE_CW)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.HK_RX_REGS:
+    if op_code in OpCode.HK_RX_REGS:
         q.add_log_cmd(f"{prefix}: {Info.HK_RX_REGS}")
-        sid = make_sid(obyt, SetIds.RX_REGISTERS_DATASET)
+        sid = make_sid(obyt, SetId.RX_REGISTERS_DATASET)
         q.add_pus_tc(generate_one_hk_command(sid))
-    if op_code in OpCodes.HK_TX_REGS:
+    if op_code in OpCode.HK_TX_REGS:
         q.add_log_cmd(f"{prefix}: {Info.HK_TX_REGS}")
-        sid = make_sid(obyt, SetIds.TX_REGISTERS_DATASET)
+        sid = make_sid(obyt, SetId.TX_REGISTERS_DATASET)
         q.add_pus_tc(generate_one_hk_command(sid))
-    if op_code in OpCodes.TX_STATUS:
+    if op_code in OpCode.TX_STATUS:
         q.add_log_cmd(f"{prefix}: {Info.TX_STATUS}")
-        command = obyt + struct.pack("!I", CommandIds.READ_TX_STATUS)
+        command = obyt + struct.pack("!I", CommandId.READ_TX_STATUS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "9":
         q.add_log_cmd("Syrlinks: Read TX waveform")
-        command = obyt + struct.pack("!I", CommandIds.READ_TX_WAVEFORM)
+        command = obyt + struct.pack("!I", CommandId.READ_TX_WAVEFORM)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "10":
         q.add_log_cmd("Syrlinks: Read TX AGC value high byte")
-        command = obyt + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_HIGH_BYTE)
+        command = obyt + struct.pack("!I", CommandId.READ_TX_AGC_VALUE_HIGH_BYTE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "11":
         q.add_log_cmd("Syrlinks: Read TX AGC value low byte")
-        command = obyt + struct.pack("!I", CommandIds.READ_TX_AGC_VALUE_LOW_BYTE)
+        command = obyt + struct.pack("!I", CommandId.READ_TX_AGC_VALUE_LOW_BYTE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "12":
         q.add_log_cmd("Syrlinks: Write LCL config")
-        command = obyt + struct.pack("!I", CommandIds.WRITE_LCL_CONFIG)
+        command = obyt + struct.pack("!I", CommandId.WRITE_LCL_CONFIG)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "13":
         q.add_log_cmd("Syrlinks: Read RX status registers")
-        command = obyt + struct.pack("!I", CommandIds.READ_RX_STATUS_REGISTERS)
+        command = obyt + struct.pack("!I", CommandId.READ_RX_STATUS_REGISTERS)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "14":
         q.add_log_cmd("Syrlinks: Read LCL config register")
-        command = obyt + struct.pack("!I", CommandIds.READ_LCL_CONFIG_REGISTER)
+        command = obyt + struct.pack("!I", CommandId.READ_LCL_CONFIG_REGISTER)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "15":
         q.add_log_cmd("Syrlinks: Set waveform OQPSK")
-        command = obyt + struct.pack("!I", CommandIds.SET_WAVEFORM_OQPSK)
+        command = obyt + struct.pack("!I", CommandId.SET_WAVEFORM_OQPSK)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "16":
         q.add_log_cmd("Syrlinks: Set waveform BPSK")
-        command = obyt + struct.pack("!I", CommandIds.SET_WAVEFORM_BPSK)
+        command = obyt + struct.pack("!I", CommandId.SET_WAVEFORM_BPSK)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "17":
         q.add_log_cmd("Syrlinks: Set second config")
-        command = obyt + struct.pack("!I", CommandIds.SET_SECOND_CONFIG)
+        command = obyt + struct.pack("!I", CommandId.SET_SECOND_CONFIG)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "18":
         q.add_log_cmd("Syrlinks: Enable debug printout")
-        command = obyt + struct.pack("!I", CommandIds.ENABLE_DEBUG)
+        command = obyt + struct.pack("!I", CommandId.ENABLE_DEBUG)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "19":
         q.add_log_cmd("Syrlinks: Disable debug printout")
-        command = obyt + struct.pack("!I", CommandIds.DISABLE_DEBUG)
+        command = obyt + struct.pack("!I", CommandId.DISABLE_DEBUG)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))

eive_tmtc/pus_tc/devs/tmp1075.py

@@ -28,7 +28,7 @@ class Tmp1075TestProcedure:
     set_mode_on = False  # If mode is MODE_ON, temperature will only be read on command
 
 
-class Tmp1075ActionIds:
+class Tmp1075ActionId:
     get_temp = bytearray([0x0, 0x0, 0x0, 0x01])
     start_adc_conversion = bytearray([0x0, 0x0, 0x0, 0x02])
 
@@ -42,11 +42,11 @@ def pack_tmp1075_test_into(
     obyt = object_id.as_bytes
     if Tmp1075TestProcedure.all or Tmp1075TestProcedure.start_adc_conversion:
         q.add_log_cmd("TMP1075: Starting new temperature conversion")
-        command = obyt + Tmp1075ActionIds.start_adc_conversion
+        command = obyt + Tmp1075ActionId.start_adc_conversion
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if Tmp1075TestProcedure.all or Tmp1075TestProcedure.get_temp:
         q.add_log_cmd("TMP1075: Read temperature")
-        command = obyt + Tmp1075ActionIds.get_temp
+        command = obyt + Tmp1075ActionId.get_temp
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
     if Tmp1075TestProcedure.set_mode_normal:

eive_tmtc/pus_tc/system/controllers.py

@@ -8,7 +8,7 @@ from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
 import eive_tmtc.config.object_ids as obj_ids
 
 
-class OpCodes:
+class OpCode:
     THERMAL_CONTROLLER = [obj_ids.THERMAL_CONTROLLER_ID.hex(), "ctrl-th"]
     CORE_CONTROLLER = [obj_ids.CORE_CONTROLLER_ID.hex(), "ctrl-core"]
 
@@ -89,7 +89,7 @@ def get_object_from_op_code(op_code: str):
     except:
         pass
 
-    if op_code in OpCodes.THERMAL_CONTROLLER:
+    if op_code in OpCode.THERMAL_CONTROLLER:
         return obj_ids.THERMAL_CONTROLLER_ID
-    if op_code in OpCodes.CORE_CONTROLLER:
+    if op_code in OpCode.CORE_CONTROLLER:
         return obj_ids.CORE_CONTROLLER_ID

eive_tmtc/pus_tc/system/proc.py

@@ -19,22 +19,22 @@ from tmtccmd.tc.pus_11_tc_sched import (
 from tmtccmd.tc.pus_3_fsfw_hk import *
 
 import eive_tmtc.config.object_ids as oids
-from eive_tmtc.pus_tc.system.tcs import OpCodes as TcsOpCodes
+from eive_tmtc.pus_tc.system.tcs import OpCode as TcsOpCodes
-from eive_tmtc.pus_tc.devs.bpx_batt import BpxSetIds
+from eive_tmtc.pus_tc.devs.bpx_batt import BpxSetId
 from eive_tmtc.tmtc.core import SetIds as CoreSetIds
 from eive_tmtc.tmtc.power.common_power import SetId as GsSetIds
-from eive_tmtc.pus_tc.devs.rad_sensor import SetIds as RadSetIds
+from eive_tmtc.pus_tc.devs.rad_sensor import SetId as RadSetIds
-from eive_tmtc.pus_tc.devs.mgms import MgmLis3SetIds as MgmLis3SetIds_0_2
+from eive_tmtc.pus_tc.devs.mgms import MgmLis3SetId as MgmLis3SetIds_0_2
-from eive_tmtc.pus_tc.devs.mgms import MgmRm3100SetIds as MgmRm3100SetIds_1_3
+from eive_tmtc.pus_tc.devs.mgms import MgmRm3100SetId as MgmRm3100SetIds_1_3
-from eive_tmtc.pus_tc.devs.gyros import AdisGyroSetIds as AdisGyroSetIds_0_2
+from eive_tmtc.pus_tc.devs.gyros import AdisGyroSetId as AdisGyroSetIds_0_2
-from eive_tmtc.pus_tc.devs.gyros import L3gGyroSetIds as L3gGyroSetIds_1_3
+from eive_tmtc.pus_tc.devs.gyros import L3gGyroSetId as L3gGyroSetIds_1_3
-from eive_tmtc.pus_tc.devs.syrlinks_hk_handler import SetIds as SyrlinksSetIds
+from eive_tmtc.pus_tc.devs.syrlinks_hk_handler import SetId as SyrlinksSetIds
-from eive_tmtc.pus_tc.devs.gps import SetIds as GpsSetIds
+from eive_tmtc.pus_tc.devs.gps import SetId as GpsSetIds
-from eive_tmtc.tmtc.acs.imtq import ImtqSetIds
+from eive_tmtc.tmtc.acs.imtq import ImtqSetId
-from eive_tmtc.pus_tc.devs.sus import SetIds
+from eive_tmtc.pus_tc.devs.sus import SetId
 from eive_tmtc.pus_tc.devs.star_tracker import SetIds as StrSetIds
 from eive_tmtc.tmtc.acs.reaction_wheels import (
-    RwSetIds,
+    RwSetId,
     rw_speed_up_cmd_consec,
     rw_speed_down_cmd_consec,
 )
@@ -49,7 +49,7 @@ from eive_tmtc.pus_tc.devs.star_tracker import pack_star_tracker_commands
 from eive_tmtc.tmtc.acs.reaction_wheels import pack_rw_ass_cmds, pack_set_speed_command
 
 
-class OpCodes:
+class OpCode:
     """FT: Functional Test"""
 
     TV_SETUP_TCS_FT_ON = ["s", "tcs-ft-on"]
@@ -93,34 +93,34 @@ KAI = KeyAndInfo
 
 PROC_INFO_DICT = {
     KAI.TV_SETUP_TCS_FT_ON[0]: [
-        OpCodes.TV_SETUP_TCS_FT_ON,
+        OpCode.TV_SETUP_TCS_FT_ON,
         KAI.TV_SETUP_TCS_FT_ON[1],
         120.0,
         10.0,
     ],
     KAI.TV_TEARDOWN_TCS_FT_OFF[0]: [
-        OpCodes.TV_TEARDOWN_TCS_FT_OFF,
+        OpCode.TV_TEARDOWN_TCS_FT_OFF,
         KAI.TV_TEARDOWN_TCS_FT_OFF[1],
         120.0,
         10.0,
     ],
-    KAI.BAT_FT[0]: [OpCodes.BAT_FT, KAI.BAT_FT[1], 120.0, 10.0],
+    KAI.BAT_FT[0]: [OpCode.BAT_FT, KAI.BAT_FT[1], 120.0, 10.0],
-    KAI.CORE_FT[0]: [OpCodes.CORE_FT, KAI.CORE_FT[1], 120.0, 10.0],
+    KAI.CORE_FT[0]: [OpCode.CORE_FT, KAI.CORE_FT[1], 120.0, 10.0],
-    KAI.PCDU_FT[0]: [OpCodes.PCDU_FT, KAI.PCDU_FT[1], 120.0, 10.0],
+    KAI.PCDU_FT[0]: [OpCode.PCDU_FT, KAI.PCDU_FT[1], 120.0, 10.0],
-    KAI.RAD_SEN_FT[0]: [OpCodes.RAD_SEN_FT, KAI.RAD_SEN_FT[1], 120.0, 10.0],
+    KAI.RAD_SEN_FT[0]: [OpCode.RAD_SEN_FT, KAI.RAD_SEN_FT[1], 120.0, 10.0],
-    KAI.ACS_FT[0]: [OpCodes.ACS_FT, KAI.ACS_FT[1], 120.0, 10.0],
+    KAI.ACS_FT[0]: [OpCode.ACS_FT, KAI.ACS_FT[1], 120.0, 10.0],
-    KAI.MGT_FT[0]: [OpCodes.MGT_FT, KAI.MGT_FT[1], 120.0, 10.0],
+    KAI.MGT_FT[0]: [OpCode.MGT_FT, KAI.MGT_FT[1], 120.0, 10.0],
     # collection_time for KAI.MGT_FT_DP maybe be reduced as a full 120
     # seconds is not needed after MGTs are tested
-    KAI.MGT_FT_DP[0]: [OpCodes.MGT_FT_DP, KAI.MGT_FT_DP[1], 10.0, 10.0],
+    KAI.MGT_FT_DP[0]: [OpCode.MGT_FT_DP, KAI.MGT_FT_DP[1], 10.0, 10.0],
-    KAI.SUS_FT[0]: [OpCodes.SUS_FT, KAI.SUS_FT[1], 120.0, 10.0],
+    KAI.SUS_FT[0]: [OpCode.SUS_FT, KAI.SUS_FT[1], 120.0, 10.0],
-    KAI.STR_FT[0]: [OpCodes.STR_FT, KAI.STR_FT[1], 120.0, 10.0],
+    KAI.STR_FT[0]: [OpCode.STR_FT, KAI.STR_FT[1], 120.0, 10.0],
     # collection_time for KAI.RW_FT_ONE_RW maybe be reduced as a full 120
     # seconds is not needed after RWs are tested
-    KAI.RW_FT_ONE_RW[0]: [OpCodes.RW_FT_ONE_RW, KAI.RW_FT_ONE_RW[1], 10.0, 1.0],
+    KAI.RW_FT_ONE_RW[0]: [OpCode.RW_FT_ONE_RW, KAI.RW_FT_ONE_RW[1], 10.0, 1.0],
     # collection_time for KAI.RW_FT_ONE_RW maybe be reduced as a full 120
     # seconds is not needed after RWs are tested
-    KAI.RW_FT_TWO_RWS[0]: [OpCodes.RW_FT_TWO_RWS, KAI.RW_FT_TWO_RWS[1], 10.0, 1.0],
+    KAI.RW_FT_TWO_RWS[0]: [OpCode.RW_FT_TWO_RWS, KAI.RW_FT_TWO_RWS[1], 10.0, 1.0],
 }
 
 
@@ -223,12 +223,12 @@ def pack_generic_hk_listening_cmds(
 def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
     sid_list = []
     obj_id_dict = get_object_ids()
-    if op_code in OpCodes.RESET_SCHED:
+    if op_code in OpCode.RESET_SCHED:
         q.add_log_cmd("Resetting/Clearing TC schedule")
         q.add_pus_tc(generate_reset_tc_sched_cmd())
-    if op_code in OpCodes.BAT_FT:
+    if op_code in OpCode.BAT_FT:
         key = KAI.BAT_FT[0]
-        sid_list.append(make_sid(oids.BPX_HANDLER_ID, BpxSetIds.GET_HK_SET))
+        sid_list.append(make_sid(oids.BPX_HANDLER_ID, BpxSetId.GET_HK_SET))
         diag_list = [False]
         pack_generic_hk_listening_cmds(
             q=q,
@@ -238,7 +238,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             cfg=GenericHkListeningCfg.default(),
         )
 
-    if op_code in OpCodes.CORE_FT:
+    if op_code in OpCode.CORE_FT:
         key = KAI.CORE_FT[0]
         sid_list.append(make_sid(oids.CORE_CONTROLLER_ID, CoreSetIds.HK))
         diag_list = [False]
@@ -250,7 +250,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             cfg=GenericHkListeningCfg.default(),
         )
 
-    if op_code in OpCodes.PCDU_FT:
+    if op_code in OpCode.PCDU_FT:
         key = KAI.PCDU_FT[0]
         pcdu_pairs = [
             (oids.P60_DOCK_HANDLER, GsSetIds.CORE),
@@ -286,7 +286,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             cfg=GenericHkListeningCfg.default(),
         )
 
-    if op_code in OpCodes.RAD_SEN_FT:
+    if op_code in OpCode.RAD_SEN_FT:
         key = KAI.RAD_SEN_FT[0]
         sid_list.append(make_sid(oids.RAD_SENSOR_ID, RadSetIds.HK))
         diag_list = [False]
@@ -298,18 +298,18 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             cfg=GenericHkListeningCfg.default(),
         )
 
-    if op_code in OpCodes.TV_SETUP_TCS_FT_ON:
+    if op_code in OpCode.TV_SETUP_TCS_FT_ON:
         # Enable scheduling
         q.add_pus_tc(generate_enable_tc_sched_cmd())
         # check whether tcs_assembly also has to be commanded to NORMAL Mode
         pack_tcs_sys_commands(q=q, op_code=TcsOpCodes.TCS_BOARD_ASS_NORMAL[0])
         pack_cmd_ctrl_to_nml(q=q, object_id=obj_id_dict.get(oids.THERMAL_CONTROLLER_ID))
 
-    if op_code in OpCodes.TV_TEARDOWN_TCS_FT_OFF:
+    if op_code in OpCode.TV_TEARDOWN_TCS_FT_OFF:
         # TCS board should always be on anyway, do not command it off here
         pack_cmd_ctrl_to_off(q=q, object_id=obj_id_dict.get(oids.THERMAL_CONTROLLER_ID))
 
-    if op_code in OpCodes.ACS_FT:
+    if op_code in OpCode.ACS_FT:
         key = KAI.ACS_FT[0]
         a_side_pairs = [
             (oids.MGM_0_LIS3_HANDLER_ID, MgmLis3SetIds_0_2.CORE_HK),
@@ -392,12 +392,12 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         pack_acs_command(q=q, op_code="acs-off")
 
-    if op_code in OpCodes.MGT_FT:
+    if op_code in OpCode.MGT_FT:
         key = KAI.MGT_FT[0]
         imtq_pairs = [
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.ENG_HK_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.ENG_HK_SET),
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.CAL_MTM_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.CAL_MTM_SET),
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.RAW_MTM_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.RAW_MTM_SET),
         ]
         diag_list = [
             True,
@@ -425,7 +425,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         pack_imtq_test_into(oids.IMTQ_HANDLER_ID, q=q, op_code="0")
 
-    if op_code in OpCodes.MGT_FT_DP:
+    if op_code in OpCode.MGT_FT_DP:
         key = KAI.MGT_FT_DP[0]
         a_side_pairs = [
             (oids.MGM_0_LIS3_HANDLER_ID, MgmLis3SetIds_0_2.CORE_HK),
@@ -442,9 +442,9 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             (oids.GPS_CONTROLLER, GpsSetIds.HK),
         ]
         imtq_pairs = [
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.ENG_HK_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.ENG_HK_SET),
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.CAL_MTM_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.CAL_MTM_SET),
-            (oids.IMTQ_HANDLER_ID, ImtqSetIds.RAW_MTM_SET),
+            (oids.IMTQ_HANDLER_ID, ImtqSetId.RAW_MTM_SET),
         ]
         d_side_and_imtq_pairs = a_side_pairs + b_side_pairs + imtq_pairs
         diag_list = [
@@ -487,7 +487,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
         pack_imtq_test_into(oids.IMTQ_HANDLER_ID, q=q, op_code="0")
         pack_acs_command(q=q, op_code="acs-off")
 
-    if op_code in OpCodes.SUS_FT:
+    if op_code in OpCode.SUS_FT:
         key = KAI.SUS_FT[0]
 
         pack_sus_cmds(q=q, op_code="sus-nom")
@@ -519,7 +519,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         # SUSs
         for nom_sus in sus_n_ids:
-            sid_list.append(make_sid(nom_sus, SetIds.HK))
+            sid_list.append(make_sid(nom_sus, SetId.HK))
         pack_generic_hk_listening_cmds(
             q=q,
             proc_key=key,
@@ -543,7 +543,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         # SUSs
         for red_sus in sus_r_ids:
-            sid_list.append(make_sid(red_sus, SetIds.HK))
+            sid_list.append(make_sid(red_sus, SetId.HK))
         pack_generic_hk_listening_cmds(
             q=q,
             proc_key=key,
@@ -558,9 +558,9 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         # SUSs
         for nom_sus in sus_n_ids:
-            sid_list.append(make_sid(nom_sus, SetIds.HK))
+            sid_list.append(make_sid(nom_sus, SetId.HK))
         for red_sus in sus_r_ids:
-            sid_list.append(make_sid(red_sus, SetIds.HK))
+            sid_list.append(make_sid(red_sus, SetId.HK))
         diag_list = [
             True,
             True,
@@ -585,7 +585,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         pack_acs_command(q=q, op_code="sus-off")
 
-    if op_code in OpCodes.SYRLINKS_FT:
+    if op_code in OpCode.SYRLINKS_FT:
         key = KAI.SYRLINKS_FT[0]
         sid_list = [
             make_sid(oids.SYRLINKS_HANDLER_ID, SyrlinksSetIds.RX_REGISTERS_DATASET),
@@ -599,7 +599,7 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
             diag_list=[False],
             cfg=GenericHkListeningCfg.default(),
         )
-    if op_code in OpCodes.STR_FT:
+    if op_code in OpCode.STR_FT:
         key = KAI.STR_FT[0]
 
         pack_star_tracker_commands(object_id=oids.STAR_TRACKER_ID, q=q, op_code="2")
@@ -617,21 +617,21 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
 
         pack_star_tracker_commands(object_id=oids.STAR_TRACKER_ID, q=q, op_code="3")
 
-    if op_code in OpCodes.RW_FT_ONE_RW:
+    if op_code in OpCode.RW_FT_ONE_RW:
         key = KAI.RW_FT_ONE_RW[0]
         rw_pairs = [
-            (oids.RW1_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW1_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW1_ID, RwSetIds.LAST_RESET),
+            (oids.RW1_ID, RwSetId.LAST_RESET),
-            (oids.RW1_ID, RwSetIds.TM_SET),
+            (oids.RW1_ID, RwSetId.TM_SET),
-            (oids.RW2_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW2_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW2_ID, RwSetIds.LAST_RESET),
+            (oids.RW2_ID, RwSetId.LAST_RESET),
-            (oids.RW2_ID, RwSetIds.TM_SET),
+            (oids.RW2_ID, RwSetId.TM_SET),
-            (oids.RW3_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW3_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW3_ID, RwSetIds.LAST_RESET),
+            (oids.RW3_ID, RwSetId.LAST_RESET),
-            (oids.RW3_ID, RwSetIds.TM_SET),
+            (oids.RW3_ID, RwSetId.TM_SET),
-            (oids.RW4_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW4_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW4_ID, RwSetIds.LAST_RESET),
+            (oids.RW4_ID, RwSetId.LAST_RESET),
-            (oids.RW4_ID, RwSetIds.TM_SET),
+            (oids.RW4_ID, RwSetId.TM_SET),
         ]
         diag_list = [
             True,
@@ -666,25 +666,25 @@ def pack_proc_commands(q: DefaultPusQueueHelper, op_code: str):
         pack_rw_ass_cmds(object_id=oids.RW_ASSEMBLY, q=q, op_code="off")
 
     # ass command with 2 rws to speed
-    if op_code in OpCodes.RW_FT_TWO_RWS:
+    if op_code in OpCode.RW_FT_TWO_RWS:
         key = KAI.RW_FT_TWO_RWS[0]
         rw_pairs = [
-            (oids.RW1_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW1_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW1_ID, RwSetIds.TEMPERATURE_SET_ID),
+            (oids.RW1_ID, RwSetId.TEMPERATURE_SET_ID),
-            (oids.RW1_ID, RwSetIds.LAST_RESET),
+            (oids.RW1_ID, RwSetId.LAST_RESET),
-            (oids.RW1_ID, RwSetIds.TM_SET),
+            (oids.RW1_ID, RwSetId.TM_SET),
-            (oids.RW2_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW2_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW2_ID, RwSetIds.TEMPERATURE_SET_ID),
+            (oids.RW2_ID, RwSetId.TEMPERATURE_SET_ID),
-            (oids.RW2_ID, RwSetIds.LAST_RESET),
+            (oids.RW2_ID, RwSetId.LAST_RESET),
-            (oids.RW2_ID, RwSetIds.TM_SET),
+            (oids.RW2_ID, RwSetId.TM_SET),
-            (oids.RW3_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW3_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW3_ID, RwSetIds.TEMPERATURE_SET_ID),
+            (oids.RW3_ID, RwSetId.TEMPERATURE_SET_ID),
-            (oids.RW3_ID, RwSetIds.LAST_RESET),
+            (oids.RW3_ID, RwSetId.LAST_RESET),
-            (oids.RW3_ID, RwSetIds.TM_SET),
+            (oids.RW3_ID, RwSetId.TM_SET),
-            (oids.RW4_ID, RwSetIds.STATUS_SET_ID),
+            (oids.RW4_ID, RwSetId.STATUS_SET_ID),
-            (oids.RW4_ID, RwSetIds.TEMPERATURE_SET_ID),
+            (oids.RW4_ID, RwSetId.TEMPERATURE_SET_ID),
-            (oids.RW4_ID, RwSetIds.LAST_RESET),
+            (oids.RW4_ID, RwSetId.LAST_RESET),
-            (oids.RW4_ID, RwSetIds.TM_SET),
+            (oids.RW4_ID, RwSetId.TM_SET),
         ]
         diag_list = [
             False,

eive_tmtc/pus_tc/system/tcs.py

@@ -14,7 +14,7 @@ from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
 from eive_tmtc.config.object_ids import TCS_BOARD_ASS_ID, TCS_CONTROLLER
 
 
-class OpCodes:
+class OpCode:
     TCS_BOARD_ASS_NORMAL = ["0", "normal"]
     TCS_BOARD_ASS_OFF = ["1", "off"]
     REQUEST_SENSOR_TEMP_SET = ["2", "temps"]
@@ -26,7 +26,7 @@ class Info:
     TCS_BOARD_ASS_OFF = "Switching TCS board assembly off"
 
 
-class SetIds(enum.IntEnum):
+class SetId(enum.IntEnum):
     PRIMARY_SENSORS = 0
     DEVICE_SENSORS = 1
     SUS_TEMP_SENSORS = 2
@@ -36,14 +36,14 @@ class SetIds(enum.IntEnum):
 def add_tcs_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
     oce.add(
-        keys=OpCodes.TCS_BOARD_ASS_NORMAL,
+        keys=OpCode.TCS_BOARD_ASS_NORMAL,
         info=Info.TCS_BOARD_ASS_NORMAL,
     )
     oce.add(
-        keys=OpCodes.TCS_BOARD_ASS_OFF,
+        keys=OpCode.TCS_BOARD_ASS_OFF,
         info=Info.TCS_BOARD_ASS_OFF,
     )
-    oce.add(keys=OpCodes.REQUEST_SENSOR_TEMP_SET, info=Info.REQUEST_SENSOR_TEMP_SET)
+    oce.add(keys=OpCode.REQUEST_SENSOR_TEMP_SET, info=Info.REQUEST_SENSOR_TEMP_SET)
     defs.add_service(
         name=CustomServiceList.TCS.value,
         info="TCS Board Assembly",
@@ -52,15 +52,15 @@ def add_tcs_cmds(defs: TmtcDefinitionWrapper):
 
 
 def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
-    if op_code in OpCodes.REQUEST_SENSOR_TEMP_SET:
+    if op_code in OpCode.REQUEST_SENSOR_TEMP_SET:
-        sensor_set_sid = make_sid(TCS_CONTROLLER, SetIds.PRIMARY_SENSORS)
+        sensor_set_sid = make_sid(TCS_CONTROLLER, SetId.PRIMARY_SENSORS)
         q.add_log_cmd(Info.REQUEST_SENSOR_TEMP_SET)
         q.add_pus_tc(generate_one_hk_command(sensor_set_sid))
     pack_tcs_ass_cmds(q, op_code)
 
 
 def pack_tcs_ass_cmds(q: DefaultPusQueueHelper, op_code: str):
-    if op_code in OpCodes.TCS_BOARD_ASS_NORMAL:
+    if op_code in OpCode.TCS_BOARD_ASS_NORMAL:
         pack_mode_cmd_with_info(
             object_id=TCS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
@@ -68,7 +68,7 @@ def pack_tcs_ass_cmds(q: DefaultPusQueueHelper, op_code: str):
             q=q,
             info=Info.TCS_BOARD_ASS_NORMAL,
         )
-    if op_code in OpCodes.TCS_BOARD_ASS_OFF:
+    if op_code in OpCode.TCS_BOARD_ASS_OFF:
         pack_mode_cmd_with_info(
             object_id=TCS_BOARD_ASS_ID,
             mode=Modes.OFF,

eive_tmtc/pus_tc/system/time.py

@@ -11,7 +11,7 @@ from tmtccmd.tc.decorator import ServiceProviderParams
 LOGGER = get_console_logger()
 
 
-class OpCodes:
+class OpCode:
     SET_CURRENT_TIME = ["0", "set-curr-time"]
 
 

eive_tmtc/pus_tm/action_reply_handler.py

@@ -1,10 +1,10 @@
 import struct
 from eive_tmtc.config.object_ids import *
-from eive_tmtc.tmtc.acs.imtq import ImtqActionIds
+from eive_tmtc.tmtc.acs.imtq import ImtqActionId
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from eive_tmtc.tmtc.payload.ploc_mpsoc import PlocReplyIds
-from eive_tmtc.tmtc.payload.ploc_supervisor import SupvActionIds
+from eive_tmtc.tmtc.payload.ploc_supervisor import SupvActionId
-from eive_tmtc.pus_tc.devs.star_tracker import StarTrackerActionIds
+from eive_tmtc.pus_tc.devs.star_tracker import StarTrackerActionId
 from eive_tmtc.tmtc.power.tm import handle_get_param_data_reply
 from tmtccmd.logging import get_console_logger
 from tmtccmd.tm import Service8FsfwTm
@@ -52,7 +52,7 @@ def handle_action_reply(
 def handle_imtq_replies(
     action_id: int, printer: FsfwTmTcPrinter, custom_data: bytearray
 ):
-    if action_id == struct.unpack("!I", ImtqActionIds.get_commanded_dipole)[0]:
+    if action_id == struct.unpack("!I", ImtqActionId.get_commanded_dipole)[0]:
         header_list = [
             "Commanded X-Dipole",
             "Commanded Y-Dipole",
@@ -99,14 +99,14 @@ def handle_ploc_replies(
 def handle_supervisor_replies(
     action_id: int, printer: FsfwTmTcPrinter, custom_data: bytearray
 ):
-    if action_id == SupvActionIds.DUMP_MRAM:
+    if action_id == SupvActionId.DUMP_MRAM:
         header_list = ["MRAM Dump"]
         content_list = [custom_data[: len(custom_data)]]
         print(header_list)
         print(content_list)
         printer.file_logger.info(header_list)
         printer.file_logger.info(content_list)
-    elif action_id == SupvActionIds.READ_GPIO:
+    elif action_id == SupvActionId.READ_GPIO:
         header_list = ["GPIO state"]
         content_list = [struct.unpack("!H", custom_data[:2])[0]]
         print(header_list)
@@ -118,7 +118,7 @@ def handle_supervisor_replies(
 def handle_startracker_replies(
     action_id: int, printer: FsfwTmTcPrinter, custom_data: bytearray
 ):
-    if action_id == StarTrackerActionIds.CHECKSUM:
+    if action_id == StarTrackerActionId.CHECKSUM:
         if len(custom_data) != 5:
             LOGGER.warning(
                 "Star tracker reply has invalid length {0}".format(len(custom_data))

eive_tmtc/pus_tm/devs/bpx_bat.py

@@ -1,6 +1,6 @@
 import struct
 
-from eive_tmtc.pus_tc.devs.bpx_batt import BpxSetIds
+from eive_tmtc.pus_tc.devs.bpx_batt import BpxSetId
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
@@ -21,7 +21,7 @@ HEADER_LIST = [
 
 def handle_bpx_hk_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
     pw = PrintWrapper(printer)
-    if set_id == BpxSetIds.GET_HK_SET:
+    if set_id == BpxSetId.GET_HK_SET:
         fmt_str = "!HHHHhhhhIB"
         inc_len = struct.calcsize(fmt_str)
         (
@@ -52,7 +52,7 @@ def handle_bpx_hk_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
         pw.dlog(str(HEADER_LIST))
         pw.dlog(str(content_list))
         printer.print_validity_buffer(validity_buffer=validity_buffer, num_vars=10)
-    elif set_id == BpxSetIds.GET_CFG_SET:
+    elif set_id == BpxSetId.GET_CFG_SET:
         battheat_mode = hk_data[0]
         battheat_low = struct.unpack("!b", hk_data[1:2])[0]
         battheat_high = struct.unpack("!b", hk_data[2:3])[0]

eive_tmtc/pus_tm/devs/gyros.py

@@ -4,7 +4,7 @@ from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
-from eive_tmtc.pus_tc.devs.gyros import L3gGyroSetIds, AdisGyroSetIds
+from eive_tmtc.pus_tc.devs.gyros import L3gGyroSetId, AdisGyroSetId
 import eive_tmtc.config.object_ids as obj_ids
 
 
@@ -30,7 +30,7 @@ def handle_gyros_hk_data(
 def handle_adis_gyro_hk(
     object_id: ObjectIdU32, printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes
 ):
-    if set_id == AdisGyroSetIds.CORE_HK:
+    if set_id == AdisGyroSetId.CORE_HK:
         pw = PrintWrapper(printer)
         fmt_str = "!ddddddf"
         inc_len = struct.calcsize(fmt_str)
@@ -44,7 +44,7 @@ def handle_adis_gyro_hk(
         )
         pw.dlog(f"Acceleration (m/s^2): X {accelX} | Y {accelY} | Z {accelZ}")
         pw.dlog(f"Temperature {temp} C")
-    if set_id == AdisGyroSetIds.CFG_HK:
+    if set_id == AdisGyroSetId.CFG_HK:
         pw = PrintWrapper(printer)
         fmt_str = "!HBHH"
         inc_len = struct.calcsize(fmt_str)
@@ -60,7 +60,7 @@ def handle_adis_gyro_hk(
 def handle_l3g_gyro_hk(
     object_id: ObjectIdU32, printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes
 ):
-    if set_id == L3gGyroSetIds.CORE_HK:
+    if set_id == L3gGyroSetId.CORE_HK:
         pw = PrintWrapper(printer)
         fmt_str = "!ffff"
         inc_len = struct.calcsize(fmt_str)

eive_tmtc/pus_tm/devs/mgms.py

@@ -1,7 +1,7 @@
 import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
-from eive_tmtc.pus_tc.devs.mgms import MgmRm3100SetIds, MgmLis3SetIds
+from eive_tmtc.pus_tc.devs.mgms import MgmRm3100SetId, MgmLis3SetId
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 import eive_tmtc.config.object_ids as obj_ids
@@ -26,7 +26,7 @@ def handle_mgm_hk_data(
 def handle_mgm_lis3_hk_data(
     object_id: ObjectIdU32, printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes
 ):
-    if set_id == MgmLis3SetIds.CORE_HK:
+    if set_id == MgmLis3SetId.CORE_HK:
         pw = PrintWrapper(printer)
         fmt_str = "!ffff"
         inc_len = struct.calcsize(fmt_str)
@@ -43,7 +43,7 @@ def handle_mgm_lis3_hk_data(
 def handle_mgm_rm3100_hk_data(
     object_id: ObjectIdU32, printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes
 ):
-    if set_id == MgmRm3100SetIds.CORE_HK:
+    if set_id == MgmRm3100SetId.CORE_HK:
         pw = PrintWrapper(printer)
         fmt_str = f"!fff"
         inc_len = struct.calcsize(fmt_str)

eive_tmtc/pus_tm/devs/plpcdu.py

@@ -2,7 +2,7 @@ import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
-from eive_tmtc.pus_tc.devs.plpcdu import SetIds
+from eive_tmtc.pus_tc.devs.plpcdu import SetId
 
 
 ADC_CHANNELS_NAMED = [
@@ -22,7 +22,7 @@ ADC_CHANNELS_NAMED = [
 
 
 def handle_plpcdu_hk(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
-    if set_id == SetIds.ADC:
+    if set_id == SetId.ADC:
         pw = PrintWrapper(printer)
         current_idx = 0
         pw.dlog("Received PL PCDU ADC HK data")

eive_tmtc/pus_tm/devs/rad_sensor.py

@@ -2,11 +2,11 @@ import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
-from eive_tmtc.pus_tc.devs.rad_sensor import SetIds
+from eive_tmtc.pus_tc.devs.rad_sensor import SetId
 
 
 def handle_rad_sensor_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
-    if set_id == SetIds.HK:
+    if set_id == SetId.HK:
         pw = PrintWrapper(printer)
         current_idx = 0
         pw.dlog("Received Radiation Sensor HK data")

eive_tmtc/pus_tm/devs/sus.py

@@ -1,7 +1,7 @@
 import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
-from eive_tmtc.pus_tc.devs.sus import SetIds
+from eive_tmtc.pus_tc.devs.sus import SetId
 from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
@@ -11,7 +11,7 @@ def handle_sus_hk(
 ):
     pw = PrintWrapper(printer)
     pw.dlog(f"Received SUS HK data from {object_id}")
-    if set_id == SetIds.HK:
+    if set_id == SetId.HK:
         current_idx = 0
         temperature = struct.unpack("!f", hk_data[current_idx : current_idx + 4])[0]
         current_idx += 4

eive_tmtc/pus_tm/devs/syrlinks.py

@@ -1,14 +1,14 @@
 import struct
 
 from eive_tmtc.pus_tm.defs import PrintWrapper
-from eive_tmtc.pus_tc.devs.syrlinks_hk_handler import SetIds
+from eive_tmtc.pus_tc.devs.syrlinks_hk_handler import SetId
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
 def handle_syrlinks_hk_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
-    if set_id == SetIds.RX_REGISTERS_DATASET:
+    if set_id == SetId.RX_REGISTERS_DATASET:
         return handle_syrlinks_rx_registers_dataset(printer, hk_data)
-    elif set_id == SetIds.TX_REGISTERS_DATASET:
+    elif set_id == SetId.TX_REGISTERS_DATASET:
         return handle_syrlinks_tx_registers_dataset(printer, hk_data)
     else:
         pw = PrintWrapper(printer)

eive_tmtc/pus_tm/event_handler.py

@@ -4,7 +4,7 @@ from eive_tmtc.config.events import get_event_dict
 from eive_tmtc.config.object_ids import get_object_ids
 from eive_tmtc.pus_tm.defs import PrintWrapper
 from eive_tmtc.pus_tm.verification_handler import generic_retval_printout
-from eive_tmtc.tmtc.acs.acs_subsystem import AcsModes
+from eive_tmtc.tmtc.acs.acs_subsystem import AcsMode
 from tmtccmd.tc.pus_200_fsfw_modes import Modes
 
 from tmtccmd.tm import Service5Tm
@@ -57,13 +57,13 @@ def handle_event_packet(raw_tm: bytes, printer: FsfwTmTcPrinter):
         if obj_name == "ACS_SUBSYSTEM":
             if tm.param_1 == Modes.OFF:
                 mode_name = "Off"
-            elif tm.param_1 == AcsModes.IDLE:
+            elif tm.param_1 == AcsMode.IDLE:
                 mode_name = "Idle"
-            elif tm.param_1 == AcsModes.DETUMBLE:
+            elif tm.param_1 == AcsMode.DETUMBLE:
                 mode_name = "Detumble"
-            elif tm.param_1 == AcsModes.SAFE:
+            elif tm.param_1 == AcsMode.SAFE:
                 mode_name = "Safe"
-            elif tm.param_1 == AcsModes.TARGET_PT:
+            elif tm.param_1 == AcsMode.TARGET_PT:
                 mode_name = "Target Pointing"
         else:
             if tm.param_1 == Modes.OFF:

eive_tmtc/pus_tm/hk_handling.py

@@ -25,7 +25,7 @@ from eive_tmtc.tmtc.power.tm import (
 )
 from eive_tmtc.pus_tm.devs.syrlinks import handle_syrlinks_hk_data
 from eive_tmtc.tmtc.acs.imtq import (
-    ImtqSetIds,
+    ImtqSetId,
     handle_self_test_data,
     handle_eng_set,
     handle_calibrated_mtm_measurement,
@@ -95,15 +95,15 @@ def handle_regular_hk_print(
     elif objb == obj_ids.SYRLINKS_HANDLER_ID:
         handle_syrlinks_hk_data(printer=printer, hk_data=hk_data, set_id=set_id)
     elif objb == obj_ids.IMTQ_HANDLER_ID:
-        if (set_id >= ImtqSetIds.POSITIVE_X_TEST) and (
+        if (set_id >= ImtqSetId.POSITIVE_X_TEST) and (
-            set_id <= ImtqSetIds.NEGATIVE_Z_TEST
+            set_id <= ImtqSetId.NEGATIVE_Z_TEST
         ):
             return handle_self_test_data(printer, hk_data)
-        elif set_id == ImtqSetIds.ENG_HK_SET:
+        elif set_id == ImtqSetId.ENG_HK_SET:
             return handle_eng_set(printer, hk_data)
-        elif set_id == ImtqSetIds.CAL_MTM_SET:
+        elif set_id == ImtqSetId.CAL_MTM_SET:
             return handle_calibrated_mtm_measurement(printer, hk_data)
-        elif set_id == ImtqSetIds.RAW_MTM_SET:
+        elif set_id == ImtqSetId.RAW_MTM_SET:
             return handle_raw_mtm_measurement(printer, hk_data)
         else:
             LOGGER.info("Service 3 TM: IMTQ handler reply with unknown set id")

eive_tmtc/pus_tm/system/tcs.py

@@ -7,7 +7,7 @@ from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
-class SetIds(enum.IntEnum):
+class SetId(enum.IntEnum):
     SENSOR_TEMPERATURE_SET = 0
     DEVICE_TEMPERATURE_SET = 1
     SUS_TEMPERATURE_SET = 2
@@ -23,7 +23,7 @@ def handle_thermal_controller_hk_data(
     if TCP_TEMP_DEV_SERVER:
         TCP_TEMP_DEV_SERVER = TmTcpServer("localhost", 7306)
     """
-    if set_id == SetIds.SENSOR_TEMPERATURE_SET:
+    if set_id == SetId.SENSOR_TEMPERATURE_SET:
         pw = PrintWrapper(printer)
         pw.dlog("Received sensor temperature data")
 
@@ -58,7 +58,7 @@ def handle_thermal_controller_hk_data(
         # tcp_server_sensor_temperatures.report_parsed_hk_data(
         #    object_id, set_id, parsed_data
         # )
-    elif set_id == SetIds.DEVICE_TEMPERATURE_SET:
+    elif set_id == SetId.DEVICE_TEMPERATURE_SET:
         pw = PrintWrapper(printer)
         pw.dlog("Received device temperature data")
         fmt_str = "!fhhhhiiiifffhffffffffffffff"
@@ -99,7 +99,7 @@ def handle_thermal_controller_hk_data(
         # tcp_server_device_temperatures.report_parsed_hk_data(
         #    object_id, set_id, parsed_data
         # )
-    elif set_id == SetIds.SUS_TEMPERATURE_SET:
+    elif set_id == SetId.SUS_TEMPERATURE_SET:
         pass
         # pw = PrintWrapper(printer)
         # pw.dlog("Received SUS temperature data")

eive_tmtc/tmtc/acs/acs_board.py

@@ -24,7 +24,7 @@ class AcsOpCodes:
     ACS_ASS_DUAL_ON = ["6", "do"]
 
 
-class DualSideSubmodes(enum.IntEnum):
+class DualSideSubmode(enum.IntEnum):
     A_SIDE = 0
     B_SIDE = 1
     DUAL_SIDE = 2
@@ -35,7 +35,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.A_SIDE,
+            submode=DualSideSubmode.A_SIDE,
             q=q,
             info="Switching to ACS board assembly A side",
         )
@@ -43,7 +43,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.B_SIDE,
+            submode=DualSideSubmode.B_SIDE,
             q=q,
             info="Switching to ACS board assembly B side",
         )
@@ -51,7 +51,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.DUAL_SIDE,
+            submode=DualSideSubmode.DUAL_SIDE,
             q=q,
             info="Switching to ACS board assembly dual mode",
         )
@@ -59,7 +59,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.ON,
-            submode=DualSideSubmodes.A_SIDE,
+            submode=DualSideSubmode.A_SIDE,
             q=q,
             info="Switching ACS board assembly A side on",
         )
@@ -67,7 +67,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.ON,
-            submode=DualSideSubmodes.B_SIDE,
+            submode=DualSideSubmode.B_SIDE,
             q=q,
             info="Switching ACS board assembly B side on",
         )
@@ -75,7 +75,7 @@ def pack_acs_command(q: DefaultPusQueueHelper, op_code: str):
         pack_mode_cmd_with_info(
             object_id=ACS_BOARD_ASS_ID,
             mode=Modes.ON,
-            submode=DualSideSubmodes.B_SIDE,
+            submode=DualSideSubmode.B_SIDE,
             q=q,
             info="Switching ACS board assembly dual side on",
         )

eive_tmtc/tmtc/acs/acs_subsystem.py

@@ -15,7 +15,7 @@ from tmtccmd.tc import service_provider
 from tmtccmd.tc.decorator import ServiceProviderParams
 
 
-class OpCodes(str, enum.Enum):
+class OpCode(str, enum.Enum):
     OFF = "off"
     SAFE = "safe"
     DETUMBLE = "detumble"
@@ -24,7 +24,7 @@ class OpCodes(str, enum.Enum):
     REPORT_ALL_MODES = "all_modes"
 
 
-class AcsModes(enum.IntEnum):
+class AcsMode(enum.IntEnum):
     OFF = 0
     SAFE = 1 << 24
     DETUMBLE = 2 << 24
@@ -42,10 +42,10 @@ class Info(str, enum.Enum):
 
 
 HANDLER_LIST: Dict[str, Tuple[int, str]] = {
-    OpCodes.OFF: (AcsModes.OFF, Info.OFF),
+    OpCode.OFF: (AcsMode.OFF, Info.OFF),
-    OpCodes.IDLE: (AcsModes.IDLE, Info.IDLE),
+    OpCode.IDLE: (AcsMode.IDLE, Info.IDLE),
-    OpCodes.SAFE: (AcsModes.SAFE, Info.SAFE),
+    OpCode.SAFE: (AcsMode.SAFE, Info.SAFE),
-    OpCodes.DETUMBLE: (AcsModes.DETUMBLE, Info.DETUMBLE),
+    OpCode.DETUMBLE: (AcsMode.DETUMBLE, Info.DETUMBLE),
 }
 
 
@@ -54,7 +54,7 @@ def build_acs_subsystem_cmd(p: ServiceProviderParams):
     op_code = p.op_code
     q = p.queue_helper
     info_prefix = "ACS Subsystem"
-    if op_code in OpCodes.REPORT_ALL_MODES:
+    if op_code in OpCode.REPORT_ALL_MODES:
         q.add_log_cmd(f"{info_prefix}: {Info.REPORT_ALL_MODES}")
         q.add_pus_tc(
             PusTelecommand(
@@ -78,8 +78,8 @@ def build_acs_subsystem_cmd(p: ServiceProviderParams):
 @tmtc_definitions_provider
 def add_acs_subsystem_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, Info.OFF)
+    oce.add(OpCode.OFF, Info.OFF)
-    oce.add(OpCodes.SAFE, Info.SAFE)
+    oce.add(OpCode.SAFE, Info.SAFE)
-    oce.add(OpCodes.IDLE, Info.IDLE)
+    oce.add(OpCode.IDLE, Info.IDLE)
-    oce.add(OpCodes.REPORT_ALL_MODES, Info.REPORT_ALL_MODES)
+    oce.add(OpCode.REPORT_ALL_MODES, Info.REPORT_ALL_MODES)
     defs.add_service(CustomServiceList.ACS_SS, "ACS Subsystem", oce)

eive_tmtc/tmtc/acs/imtq.py

@@ -27,14 +27,14 @@ from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
-class OpCodes:
+class OpCode:
     ON = ["on"]
     NORMAL = ["normal"]
     OFF = ["off"]
     SET_DIPOLE = ["set_dipole"]
 
 
-class ImtqSetIds:
+class ImtqSetId:
     ENG_HK_SET = 1
     CAL_MTM_SET = 2
     RAW_MTM_SET = 3
@@ -46,7 +46,7 @@ class ImtqSetIds:
     NEGATIVE_Z_TEST = 9
 
 
-class ImtqActionIds:
+class ImtqActionId:
     start_actuation_dipole = bytearray([0x0, 0x0, 0x0, 0x02])
     get_commanded_dipole = bytearray([0x0, 0x0, 0x0, 0x03])
     perform_positive_x_test = bytearray([0x0, 0x0, 0x0, 0x07])
@@ -63,16 +63,16 @@ class ImtqActionIds:
 @tmtc_definitions_provider
 def add_imtq_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, "Mode Off")
+    oce.add(OpCode.OFF, "Mode Off")
-    oce.add(OpCodes.ON, "Mode On")
+    oce.add(OpCode.ON, "Mode On")
-    oce.add(OpCodes.NORMAL, "Mode Normal")
+    oce.add(OpCode.NORMAL, "Mode Normal")
     oce.add("3", "IMTQ perform pos X self test")
     oce.add("4", "IMTQ perform neg X self test")
     oce.add("5", "IMTQ perform pos Y self test")
     oce.add("6", "IMTQ perform neg Y self test")
     oce.add("7", "IMTQ perform pos Z self test")
     oce.add("8", "IMTQ perform neg Z self test")
-    oce.add(OpCodes.SET_DIPOLE, "IMTQ command dipole")
+    oce.add(OpCode.SET_DIPOLE, "IMTQ command dipole")
     oce.add("10", "IMTQ get commanded dipole")
     oce.add("11", "IMTQ get engineering hk set")
     oce.add("12", "IMTQ get calibrated MTM measurement one shot")
@@ -85,92 +85,92 @@ def pack_imtq_test_into(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_cod
         f"Testing ISIS IMTQ handler with object id: {object_id.as_hex_string}"
     )
 
-    if op_code in OpCodes.OFF:
+    if op_code in OpCode.OFF:
         q.add_log_cmd("IMTQ: Set mode off")
         command = pack_mode_data(object_id.as_bytes, Modes.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.ON:
+    if op_code in OpCode.ON:
         q.add_log_cmd("IMTQ: Set mode on")
         command = pack_mode_data(object_id.as_bytes, Modes.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.NORMAL:
+    if op_code in OpCode.NORMAL:
         q.add_log_cmd("IMTQ: Mode Normal")
         command = pack_mode_data(object_id.as_bytes, Modes.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
     if op_code == "3":
         q.add_log_cmd("IMTQ: Perform positive x self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_positive_x_test
+        command = object_id.as_bytes + ImtqActionId.perform_positive_x_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Initiate reading of positive x self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Request dataset with positive x self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.POSITIVE_X_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.POSITIVE_X_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
     if op_code == "4":
         q.add_log_cmd("IMTQ: Perform negative x self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_negative_x_test
+        command = object_id.as_bytes + ImtqActionId.perform_negative_x_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_log_cmd("IMTQ: Initiate reading of negative x self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_log_cmd("IMTQ: Request dataset with negative x self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.NEGATIVE_X_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.NEGATIVE_X_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
     if op_code == "5":
         q.add_log_cmd("IMTQ: Perform positive y self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_positive_y_test
+        command = object_id.as_bytes + ImtqActionId.perform_positive_y_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_log_cmd("IMTQ: Initiate reading of positive y self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Request dataset with positive y self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.POSITIVE_Y_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.POSITIVE_Y_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
     if op_code == "6":
         q.add_log_cmd("IMTQ: Perform negative y self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_negative_y_test
+        command = object_id.as_bytes + ImtqActionId.perform_negative_y_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Initiate reading of negative y self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Request dataset with negative y self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.NEGATIVE_Y_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.NEGATIVE_Y_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
     if op_code == "7":
         q.add_log_cmd("IMTQ: Perform positive z self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_positive_z_test
+        command = object_id.as_bytes + ImtqActionId.perform_positive_z_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Initiate reading of positive z self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
         q.add_log_cmd("IMTQ: Request dataset with positive z self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.POSITIVE_Y_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.POSITIVE_Y_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
     if op_code == "8":
         q.add_log_cmd("IMTQ: Perform negative z self test")
-        command = object_id.as_bytes + ImtqActionIds.perform_negative_z_test
+        command = object_id.as_bytes + ImtqActionId.perform_negative_z_test
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_log_cmd("IMTQ: Initiate reading of negative z self test results")
-        command = object_id.as_bytes + ImtqActionIds.read_self_test_results
+        command = object_id.as_bytes + ImtqActionId.read_self_test_results
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_log_cmd("IMTQ: Request dataset with negative z self test results")
-        sid = make_sid(object_id.as_bytes, ImtqSetIds.NEGATIVE_Z_TEST)
+        sid = make_sid(object_id.as_bytes, ImtqSetId.NEGATIVE_Z_TEST)
         q.add_pus_tc(generate_one_hk_command(sid))
 
-    if op_code in OpCodes.SET_DIPOLE:
+    if op_code in OpCode.SET_DIPOLE:
         x_dipole = int(input("Specify X dipole [range [0, 2000] * 10^-4 * Am^2]: "))
         y_dipole = int(input("Specify Y dipole [range [0, 2000] * 10^-4 * Am^2]: "))
         z_dipole = int(input("Specify Z dipole [range [0, 2000] * 10^-4 * Am^2]: "))
@@ -192,14 +192,14 @@ def pack_imtq_test_into(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_cod
 
     if op_code == "10":
         q.add_log_cmd("IMTQ: Get commanded dipole")
-        command = object_id.as_bytes + ImtqActionIds.get_commanded_dipole
+        command = object_id.as_bytes + ImtqActionId.get_commanded_dipole
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
 
     if op_code == "11":
         q.add_log_cmd("IMTQ: Get engineering hk set")
         q.add_pus_tc(
             generate_one_diag_command(
-                sid=make_sid(object_id=object_id.as_bytes, set_id=ImtqSetIds.ENG_HK_SET)
+                sid=make_sid(object_id=object_id.as_bytes, set_id=ImtqSetId.ENG_HK_SET)
             )
         )
 
@@ -207,9 +207,7 @@ def pack_imtq_test_into(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_cod
         q.add_log_cmd("IMTQ: Get calibrated MTM hk set")
         q.add_pus_tc(
             generate_one_diag_command(
-                sid=make_sid(
+                sid=make_sid(object_id=object_id.as_bytes, set_id=ImtqSetId.CAL_MTM_SET)
-                    object_id=object_id.as_bytes, set_id=ImtqSetIds.CAL_MTM_SET
-                )
             )
         )
 
@@ -217,9 +215,7 @@ def pack_imtq_test_into(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_cod
         q.add_log_cmd("IMTQ: Get raw MTM hk set")
         q.add_pus_tc(
             generate_one_diag_command(
-                sid=make_sid(
+                sid=make_sid(object_id=object_id.as_bytes, set_id=ImtqSetId.RAW_MTM_SET)
-                    object_id=object_id.as_bytes, set_id=ImtqSetIds.RAW_MTM_SET
-                )
             )
         )
 
@@ -236,7 +232,7 @@ def pack_dipole_command(
                      When set to 0, the dipole will be generated until a new dipole actuation
                      command is sent.
     """
-    action_id = ImtqActionIds.start_actuation_dipole
+    action_id = ImtqActionId.start_actuation_dipole
     command = object_id + action_id
     x_dipole = int(round(x_dipole))
     y_dipole = int(round(y_dipole))

eive_tmtc/tmtc/acs/reaction_wheels.py

@@ -26,7 +26,7 @@ from tmtccmd.util import ObjectIdU32
 from tmtccmd.util.tmtc_printer import FsfwTmTcPrinter
 
 
-class OpCodesDevs:
+class OpCodesDev:
     SPEED = ["0", "speed"]
     ON = ["1", "on"]
     NML = ["2", "nml"]
@@ -37,7 +37,7 @@ class OpCodesDevs:
     DISABLE_STATUS_HK = ["7", "disable_status_hk"]
 
 
-class InfoDevs:
+class InfoDev:
     SPEED = "Set speed"
     ON = "Set On"
     NML = "Set Normal"
@@ -64,14 +64,14 @@ class InfoAss:
     ALL_SPEED_OFF = "Speed down to 0"
 
 
-class RwSetIds:
+class RwSetId:
     STATUS_SET_ID = 4
     TEMPERATURE_SET_ID = 8
     LAST_RESET = 2
     TM_SET = 9
 
 
-class RwCommandIds:
+class RwCommandId:
     RESET_MCU = bytearray([0x0, 0x0, 0x0, 0x01])
     # Reads status information from reaction wheel into dataset with id 4
     GET_RW_STATUS = bytearray([0x0, 0x0, 0x0, 0x04])
@@ -94,14 +94,14 @@ class RampTime:
 @tmtc_definitions_provider
 def add_rw_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(info=InfoDevs.SPEED, keys=OpCodesDevs.SPEED)
+    oce.add(info=InfoDev.SPEED, keys=OpCodesDev.SPEED)
-    oce.add(info=InfoDevs.ON, keys=OpCodesDevs.ON)
+    oce.add(info=InfoDev.ON, keys=OpCodesDev.ON)
-    oce.add(info=InfoDevs.OFF, keys=OpCodesDevs.OFF)
+    oce.add(info=InfoDev.OFF, keys=OpCodesDev.OFF)
-    oce.add(info=InfoDevs.NML, keys=OpCodesDevs.NML)
+    oce.add(info=InfoDev.NML, keys=OpCodesDev.NML)
-    oce.add(info=InfoDevs.GET_STATUS, keys=OpCodesDevs.GET_STATUS)
+    oce.add(info=InfoDev.GET_STATUS, keys=OpCodesDev.GET_STATUS)
-    oce.add(info=InfoDevs.GET_TM, keys=OpCodesDevs.GET_TM)
+    oce.add(info=InfoDev.GET_TM, keys=OpCodesDev.GET_TM)
-    oce.add(info=InfoDevs.ENABLE_STATUS_HK, keys=OpCodesDevs.ENABLE_STATUS_HK)
+    oce.add(info=InfoDev.ENABLE_STATUS_HK, keys=OpCodesDev.ENABLE_STATUS_HK)
-    oce.add(info=InfoDevs.DISABLE_STATUS_HK, keys=OpCodesDevs.DISABLE_STATUS_HK)
+    oce.add(info=InfoDev.DISABLE_STATUS_HK, keys=OpCodesDev.DISABLE_STATUS_HK)
     defs.add_service(
         name=CustomServiceList.REACTION_WHEEL_1.value,
         info="Reaction Wheel 1",
@@ -138,56 +138,56 @@ def add_rw_cmds(defs: TmtcDefinitionWrapper):
 def pack_single_rw_test_into(
     object_id: bytes, rw_idx: int, q: DefaultPusQueueHelper, op_code: str
 ):
-    if op_code in OpCodesDevs.SPEED:
+    if op_code in OpCodesDev.SPEED:
         speed, ramp_time = prompt_speed_ramp_time()
         q.add_log_cmd(
-            f"RW {rw_idx}: {InfoDevs.SPEED} with target "
+            f"RW {rw_idx}: {InfoDev.SPEED} with target "
             f"speed {speed / 10.0} RPM and {ramp_time} ms ramp time"
         )
         q.add_pus_tc(pack_set_speed_command(object_id, speed, ramp_time))
 
-    if op_code in OpCodesDevs.ON:
+    if op_code in OpCodesDev.ON:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.ON}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.ON}")
         mode_data = pack_mode_data(object_id, Modes.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDevs.NML:
+    if op_code in OpCodesDev.NML:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.NML}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.NML}")
         mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDevs.OFF:
+    if op_code in OpCodesDev.OFF:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.OFF}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.OFF}")
         mode_data = pack_mode_data(object_id, Modes.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=mode_data))
 
-    if op_code in OpCodesDevs.GET_TM:
+    if op_code in OpCodesDev.GET_TM:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.GET_TM}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_TM}")
         q.add_pus_tc(
             generate_one_hk_command(
-                sid=make_sid(object_id=object_id, set_id=RwSetIds.TM_SET)
+                sid=make_sid(object_id=object_id, set_id=RwSetId.TM_SET)
             )
         )
-    if op_code in OpCodesDevs.GET_STATUS:
+    if op_code in OpCodesDev.GET_STATUS:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.GET_STATUS}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.GET_STATUS}")
         q.add_pus_tc(
             generate_one_diag_command(
-                sid=make_sid(object_id=object_id, set_id=RwSetIds.STATUS_SET_ID)
+                sid=make_sid(object_id=object_id, set_id=RwSetId.STATUS_SET_ID)
             )
         )
-    if op_code in OpCodesDevs.ENABLE_STATUS_HK:
+    if op_code in OpCodesDev.ENABLE_STATUS_HK:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.ENABLE_STATUS_HK}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.ENABLE_STATUS_HK}")
         interval = float(input("Please enter HK interval in floating point seconds: "))
         cmds = enable_periodic_hk_command_with_interval(
-            True, make_sid(object_id, RwSetIds.STATUS_SET_ID), interval
+            True, make_sid(object_id, RwSetId.STATUS_SET_ID), interval
         )
         for cmd in cmds:
             q.add_pus_tc(cmd)
-    if op_code in OpCodesDevs.DISABLE_STATUS_HK:
+    if op_code in OpCodesDev.DISABLE_STATUS_HK:
-        q.add_log_cmd(f"RW {rw_idx}: {InfoDevs.DISABLE_STATUS_HK}")
+        q.add_log_cmd(f"RW {rw_idx}: {InfoDev.DISABLE_STATUS_HK}")
         q.add_pus_tc(
             disable_periodic_hk_command(
-                True, make_sid(object_id, RwSetIds.STATUS_SET_ID)
+                True, make_sid(object_id, RwSetId.STATUS_SET_ID)
             )
         )
 
@@ -264,7 +264,7 @@ def pack_set_speed_command(
         ramp_time_ms > 0 and (ramp_time_ms > 20000 or ramp_time_ms < 10)
     ):
         raise ValueError("Invalid Ramp Speed time. Allowed range is [10-20000] ms")
-    command_id = RwCommandIds.SET_SPEED
+    command_id = RwCommandId.SET_SPEED
     command = bytearray()
     command += object_id + command_id
     command = command + struct.pack("!i", speed)
@@ -279,7 +279,7 @@ def handle_rw_hk_data(
 
     pw = PrintWrapper(printer)
     current_idx = 0
-    if set_id == RwSetIds.STATUS_SET_ID:
+    if set_id == RwSetId.STATUS_SET_ID:
         pw.dlog(
             f"Received Status HK (ID {set_id}) from Reaction Wheel {object_id.name}"
         )
@@ -303,7 +303,7 @@ def handle_rw_hk_data(
             f"1: High Current Mode (0.6 A)"
         )
         printer.print_validity_buffer(hk_data[current_idx:], 5)
-    if set_id == RwSetIds.LAST_RESET:
+    if set_id == RwSetId.LAST_RESET:
         pw.dlog(
             f"Received Last Reset HK (ID {set_id}) from Reaction Wheel {object_id.name}"
         )
@@ -317,7 +317,7 @@ def handle_rw_hk_data(
             f"Last Non-Cleared (Cached) Reset Status {last_not_cleared_reset_status} | "
             f"Current Reset Status {current_reset_status}"
         )
-    if set_id == RwSetIds.TM_SET:
+    if set_id == RwSetId.TM_SET:
         pw.dlog(f"Received TM HK (ID {set_id}) from Reaction Wheel {object_id.name}")
         fmt_str = "!BiffBBiiIIIIIIIIIIIIIIII"
         inc_len = struct.calcsize(fmt_str)

eive_tmtc/tmtc/acs/sus_board.py

@@ -1,6 +1,6 @@
 from eive_tmtc.config.definitions import CustomServiceList
 from eive_tmtc.config.object_ids import SUS_BOARD_ASS_ID
-from eive_tmtc.tmtc.acs.acs_board import DualSideSubmodes
+from eive_tmtc.tmtc.acs.acs_board import DualSideSubmode
 from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
 from tmtccmd.config.tmtc import (
     tmtc_definitions_provider,
@@ -12,7 +12,7 @@ from tmtccmd.tc.decorator import ServiceProviderParams
 from tmtccmd.tc.pus_200_fsfw_modes import Modes
 
 
-class SusOpCodes:
+class SusOpCode:
     SUS_ASS_NOM_SIDE = ["0", "nom"]
     SUS_ASS_RED_SIDE = ["1", "red"]
     SUS_ASS_DUAL_MODE = ["2", "dual"]
@@ -20,23 +20,23 @@ class SusOpCodes:
 
 
 def pack_sus_cmds(q: DefaultPusQueueHelper, op_code: str):
-    if op_code in SusOpCodes.SUS_ASS_NOM_SIDE:
+    if op_code in SusOpCode.SUS_ASS_NOM_SIDE:
         pack_mode_cmd_with_info(
             object_id=SUS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.A_SIDE,
+            submode=DualSideSubmode.A_SIDE,
             q=q,
             info="Switching to SUS board to nominal side",
         )
-    if op_code in SusOpCodes.SUS_ASS_RED_SIDE:
+    if op_code in SusOpCode.SUS_ASS_RED_SIDE:
         pack_mode_cmd_with_info(
             object_id=SUS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.B_SIDE,
+            submode=DualSideSubmode.B_SIDE,
             q=q,
             info="Switching to SUS board to redundant side",
         )
-    if op_code in SusOpCodes.SUS_ASS_OFF:
+    if op_code in SusOpCode.SUS_ASS_OFF:
         pack_mode_cmd_with_info(
             object_id=SUS_BOARD_ASS_ID,
             mode=Modes.OFF,
@@ -44,11 +44,11 @@ def pack_sus_cmds(q: DefaultPusQueueHelper, op_code: str):
             q=q,
             info="Switching SUS board off",
         )
-    if op_code in SusOpCodes.SUS_ASS_DUAL_MODE:
+    if op_code in SusOpCode.SUS_ASS_DUAL_MODE:
         pack_mode_cmd_with_info(
             object_id=SUS_BOARD_ASS_ID,
             mode=Modes.NORMAL,
-            submode=DualSideSubmodes.DUAL_SIDE,
+            submode=DualSideSubmode.DUAL_SIDE,
             q=q,
             info="Switching to SUS board to dual side",
         )
@@ -65,19 +65,19 @@ def pack_sus_cmds_prvoider(p: ServiceProviderParams):
 def add_sus_board_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
     oce.add(
-        keys=SusOpCodes.SUS_ASS_NOM_SIDE,
+        keys=SusOpCode.SUS_ASS_NOM_SIDE,
         info="Switch SUS board to nominal side",
     )
     oce.add(
-        keys=SusOpCodes.SUS_ASS_RED_SIDE,
+        keys=SusOpCode.SUS_ASS_RED_SIDE,
         info="Switch SUS board to redundant side",
     )
     oce.add(
-        keys=SusOpCodes.SUS_ASS_OFF,
+        keys=SusOpCode.SUS_ASS_OFF,
         info="Switch off SUS board",
     )
     oce.add(
-        keys=SusOpCodes.SUS_ASS_DUAL_MODE,
+        keys=SusOpCode.SUS_ASS_DUAL_MODE,
         info="Switch SUS board to dual mode",
     )
     defs.add_service(

eive_tmtc/tmtc/payload/pl_subsystem.py

@@ -12,12 +12,12 @@ from tmtccmd.tc.decorator import ServiceProviderParams
 from tmtccmd.tc.pus_200_fsfw_modes import Subservices as ModeSubservices
 
 
-class OpCodes(str, enum.Enum):
+class OpCode(str, enum.Enum):
     OFF = "off"
     REPORT_ALL_MODES = "report_modes"
 
 
-class PayloadModes(enum.IntEnum):
+class PayloadMode(enum.IntEnum):
     OFF = 0
 
 
@@ -27,7 +27,7 @@ class Info(str, enum.Enum):
 
 
 HANDLER_LIST: Dict[str, Tuple[int, str]] = {
-    OpCodes.OFF: (PayloadModes.OFF, Info.OFF),
+    OpCode.OFF: (PayloadMode.OFF, Info.OFF),
 }
 
 
@@ -36,7 +36,7 @@ def build_acs_subsystem_cmd(p: ServiceProviderParams):
     op_code = p.op_code
     q = p.queue_helper
     info_prefix = "ACS Subsystem"
-    if op_code in OpCodes.REPORT_ALL_MODES:
+    if op_code in OpCode.REPORT_ALL_MODES:
         q.add_log_cmd(f"{info_prefix}: {Info.REPORT_ALL_MODES}")
         q.add_pus_tc(
             PusTelecommand(
@@ -60,6 +60,6 @@ def build_acs_subsystem_cmd(p: ServiceProviderParams):
 @tmtc_definitions_provider
 def add_payload_subsystem_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, Info.OFF)
+    oce.add(OpCode.OFF, Info.OFF)
-    oce.add(OpCodes.REPORT_ALL_MODES, Info.REPORT_ALL_MODES)
+    oce.add(OpCode.REPORT_ALL_MODES, Info.REPORT_ALL_MODES)
     defs.add_service(CustomServiceList.PL_SS, "Payload Subsystem", oce)

eive_tmtc/tmtc/payload/ploc_memory_dumper.py

@@ -16,7 +16,7 @@ from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.util import ObjectIdU32
 
 
-class ActionIds:
+class ActionId:
     DUMP_MRAM = 1
 
 
@@ -43,7 +43,7 @@ def pack_ploc_memory_dumper_cmd(
 def pack_mram_dump_cmd(object_id: bytes) -> bytearray:
     start = int(input("Start address: 0x"), 16)
     end = int(input("End address: 0x"), 16)
-    command = object_id + struct.pack("!I", ActionIds.DUMP_MRAM)
+    command = object_id + struct.pack("!I", ActionId.DUMP_MRAM)
     command = command + struct.pack("!I", start)
     command = command + struct.pack("!I", end)
     return bytearray(command)

eive_tmtc/tmtc/payload/ploc_mpsoc.py

@@ -50,7 +50,7 @@ SEQ_FILE_DICT = {
 CARRIAGE_RETURN = 0xD
 
 
-class CommandIds(enum.IntEnum):
+class CommandId(enum.IntEnum):
     TC_MEM_WRITE = 1
     TC_MEM_READ = 2
     FLASH_WRITE = 9
@@ -68,7 +68,7 @@ class CommandIds(enum.IntEnum):
     RELEASE_UART_TX = 21
 
 
-class OpCodes:
+class OpCode:
     ON = ["on"]
     OFF = ["off"]
     NORMAL = ["normal"]
@@ -104,22 +104,22 @@ class PlocReplyIds(enum.IntEnum):
 @tmtc_definitions_provider
 def add_ploc_mpsoc_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(OpCodes.OFF, Info.OFF)
+    oce.add(OpCode.OFF, Info.OFF)
-    oce.add(OpCodes.ON, Info.ON)
+    oce.add(OpCode.ON, Info.ON)
-    oce.add(OpCodes.NORMAL, Info.NORMAL)
+    oce.add(OpCode.NORMAL, Info.NORMAL)
     oce.add("3", "Ploc MPSoC: Memory write")
     oce.add("4", "Ploc MPSoC: Memory read")
     oce.add("5", "Ploc MPSoC: Flash write")
     oce.add("6", "Ploc MPSoC: Flash delete")
-    oce.add(OpCodes.REPLAY_START, Info.REPLAY_START)
+    oce.add(OpCode.REPLAY_START, Info.REPLAY_START)
     oce.add("8", "Ploc MPSoC: Replay stop")
-    oce.add(OpCodes.DOWNLINK_PWR_ON, Info.DOWNLINK_PWR_ON)
+    oce.add(OpCode.DOWNLINK_PWR_ON, Info.DOWNLINK_PWR_ON)
     oce.add("10", "Ploc MPSoC: Downlink pwr off")
-    oce.add(OpCodes.REPLAY_WRITE_SEQ, Info.REPLAY_WRITE_SEQ)
+    oce.add(OpCode.REPLAY_WRITE_SEQ, Info.REPLAY_WRITE_SEQ)
     oce.add("12", "Ploc MPSoC: OBSW reset sequence count")
-    oce.add(OpCodes.VERIFY_BOOT, "Ploc MPSoC: Read DEADBEEF address")
+    oce.add(OpCode.VERIFY_BOOT, "Ploc MPSoC: Read DEADBEEF address")
-    oce.add(OpCodes.MODE_REPLAY, Info.MODE_REPLAY)
+    oce.add(OpCode.MODE_REPLAY, Info.MODE_REPLAY)
-    oce.add(OpCodes.MODE_IDLE, Info.MODE_IDLE)
+    oce.add(OpCode.MODE_IDLE, Info.MODE_IDLE)
     oce.add("16", "Ploc MPSoC: Tc cam command send")
     oce.add("17", "Ploc MPSoC: Set UART TX tristate")
     oce.add("18", "Ploc MPSoC: Relesase UART TX")
@@ -136,15 +136,15 @@ def pack_ploc_mpsoc_commands(p: ServiceProviderParams):
         f"Generate command for PLOC MPSoC with object id: {object_id.as_hex_string}"
     )
     obyt = object_id.as_bytes
-    if op_code in OpCodes.OFF:
+    if op_code in OpCode.OFF:
         q.add_log_cmd(f"{prefix}: {Info.OFF}")
         command = pack_mode_data(obyt, Modes.OFF, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
-    if op_code in OpCodes.ON:
+    if op_code in OpCode.ON:
         q.add_log_cmd(f"{prefix}: {Info.ON}")
         data = pack_mode_data(obyt, Modes.ON, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
-    if op_code in OpCodes.NORMAL:
+    if op_code in OpCode.NORMAL:
         q.add_log_cmd(f"{prefix}: {Info.NORMAL}")
         data = pack_mode_data(object_id.as_bytes, Modes.NORMAL, 0)
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=data))
@@ -172,64 +172,64 @@ def pack_ploc_mpsoc_commands(p: ServiceProviderParams):
         q.add_log_cmd("PLOC MPSoC: Flash delete")
         data = prepare_flash_delete_cmd(object_id.as_bytes)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.REPLAY_START:
+    if op_code in OpCode.REPLAY_START:
         q.add_log_cmd(f"{prefix}: {Info.REPLAY_START}")
         data = prepare_replay_start_cmd(object_id.as_bytes)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "8":
         q.add_log_cmd("PLOC MPSoC: Replay stop")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.TC_REPLAY_STOP)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.TC_REPLAY_STOP)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.DOWNLINK_PWR_ON:
+    if op_code in OpCode.DOWNLINK_PWR_ON:
-        q.add_log_cmd(f"{prefix}: {OpCodes.DOWNLINK_PWR_ON}")
+        q.add_log_cmd(f"{prefix}: {OpCode.DOWNLINK_PWR_ON}")
         data = prepare_downlink_pwr_on_cmd(object_id.as_bytes)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "10":
         q.add_log_cmd("PLOC MPSoC: Downlink pwr off")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.TC_DOWNLINK_PWR_OFF)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.TC_DOWNLINK_PWR_OFF)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.REPLAY_WRITE_SEQ:
+    if op_code in OpCode.REPLAY_WRITE_SEQ:
         q.add_log_cmd(f"{prefix}: {Info.REPLAY_WRITE_SEQ}")
         data = prepare_replay_write_sequence_cmd(object_id.as_bytes)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "12":
         q.add_log_cmd("PLOC MPSoC: Reset OBSW sequence count")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.OBSW_RESET_SEQ_COUNT)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.OBSW_RESET_SEQ_COUNT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.VERIFY_BOOT:
+    if op_code in OpCode.VERIFY_BOOT:
         num_words = 1
         q.add_log_cmd(f"{prefix} {Info.VERIFY_BOOT}")
         data = (
             object_id.as_bytes
-            + struct.pack("!I", CommandIds.TC_MEM_READ)
+            + struct.pack("!I", CommandId.TC_MEM_READ)
             + struct.pack("!I", MemAddresses.DEADBEEF)
             + struct.pack("!H", num_words)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.MODE_REPLAY:
+    if op_code in OpCode.MODE_REPLAY:
         q.add_log_cmd("PLOC MPSoC: Tc mode replay")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.TC_MODE_REPLAY)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.TC_MODE_REPLAY)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
-    if op_code in OpCodes.MODE_IDLE:
+    if op_code in OpCode.MODE_IDLE:
         q.add_log_cmd("PLOC MPSoC: Tc mode idle")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.TC_MODE_IDLE)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.TC_MODE_IDLE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "16":
         q.add_log_cmd("PLOC MPSoC: Tc cam command send")
         cam_cmd = input("Specify cam command string: ")
         data = (
             object_id.as_bytes
-            + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND)
+            + struct.pack("!I", CommandId.TC_CAM_CMD_SEND)
             + bytearray(cam_cmd, "utf-8")
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "17":
         q.add_log_cmd("PLOC MPSoC: Set UART TX tristate")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.SET_UART_TX_TRISTATE)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.SET_UART_TX_TRISTATE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
     if op_code == "18":
         q.add_log_cmd("PLOC MPSoC: Release UART TX")
-        data = object_id.as_bytes + struct.pack("!I", CommandIds.RELEASE_UART_TX)
+        data = object_id.as_bytes + struct.pack("!I", CommandId.RELEASE_UART_TX)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=data))
 
 
@@ -246,7 +246,7 @@ def generate_write_mem_command(
     """
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_MEM_WRITE)
+        + struct.pack("!I", CommandId.TC_MEM_WRITE)
         + struct.pack("!I", memory_address)
         + struct.pack("!H", mem_len)
         + struct.pack("!I", memory_data)
@@ -259,7 +259,7 @@ def prepare_mem_read_command(object_id: bytes) -> bytearray:
     num_words = int(input("PLOC MPSoC specify number of words (32-bit) to read: "))
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_MEM_READ)
+        + struct.pack("!I", CommandId.TC_MEM_READ)
         + struct.pack("!I", memory_address)
         + struct.pack("!H", num_words)
     )
@@ -271,7 +271,7 @@ def prepare_flash_write_cmd(object_id: bytes) -> bytearray:
     mpsocFile = get_mpsoc_file()
     command = (
         object_id
-        + struct.pack("!I", CommandIds.FLASH_WRITE)
+        + struct.pack("!I", CommandId.FLASH_WRITE)
         + bytearray(obcFile, "utf-8")
         + bytearray(mpsocFile, "utf-8")
     )
@@ -282,7 +282,7 @@ def prepare_flash_delete_cmd(object_id: bytes) -> bytearray:
     file = get_mpsoc_file()
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_FLASH_DELETE)
+        + struct.pack("!I", CommandId.TC_FLASH_DELETE)
         + bytearray(file, "utf-8")
     )
     return bytearray(command)
@@ -292,7 +292,7 @@ def prepare_replay_start_cmd(object_id: bytes) -> bytearray:
     replay = int(input("Specify replay mode (0 - once, 1 - repeated): "))
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_REPLAY_START)
+        + struct.pack("!I", CommandId.TC_REPLAY_START)
         + struct.pack("!B", replay)
     )
     return bytearray(command)
@@ -303,7 +303,7 @@ def prepare_downlink_pwr_on_cmd(object_id: bytes) -> bytearray:
     lane_rate = int(input("Specify lane rate (0 - 9): "))
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_DOWNLINK_PWR_ON)
+        + struct.pack("!I", CommandId.TC_DOWNLINK_PWR_ON)
         + struct.pack("!B", mode)
         + struct.pack("!B", lane_rate)
     )
@@ -315,7 +315,7 @@ def prepare_replay_write_sequence_cmd(object_id: bytes) -> bytearray:
     file = get_sequence_file()
     command = (
         object_id
-        + struct.pack("!I", CommandIds.TC_REPLAY_WRITE_SEQUENCE)
+        + struct.pack("!I", CommandId.TC_REPLAY_WRITE_SEQUENCE)
         + struct.pack("!B", use_decoding)
         + bytearray(file, "utf-8")
         # + bytes([0])

eive_tmtc/tmtc/payload/ploc_supervisor.py

@@ -83,7 +83,7 @@ FACTORY_RESET_OPS = {
 }
 
 
-class SupvActionIds:
+class SupvActionId:
     HK_REPORT = 1
     START_MPSOC = 3
     SHUTWOWN_MPSOC = 4
@@ -244,7 +244,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         q.add_pus_tc(PusTelecommand(service=200, subservice=1, app_data=command))
     if op_code in OpCodes.HK_TO_OBC:
         q.add_log_cmd(f"{prefix}: {Info.HK_TO_OBC}")
-        command = obyt + struct.pack("!I", SupvActionIds.HK_REPORT)
+        command = obyt + struct.pack("!I", SupvActionId.HK_REPORT)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.REQUEST_HK:
         q.add_log_cmd(f"{prefix}: {Info.REQUEST_HK}")
@@ -253,11 +253,11 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         q.add_pus_tc(cmd)
     elif op_code in OpCodes.START_MPSOC:
         q.add_log_cmd("PLOC Supervisor: Start MPSoC")
-        command = obyt + struct.pack("!I", SupvActionIds.START_MPSOC)
+        command = obyt + struct.pack("!I", SupvActionId.START_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.SHUTDOWN_MPSOC:
         q.add_log_cmd("PLOC Supervisor: Shutdown MPSoC")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.SHUTWOWN_MPSOC)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.SHUTWOWN_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.SEL_NVM:
         q.add_log_cmd("PLOC Supervisor: Select MPSoC boot image")
@@ -281,7 +281,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         q.add_pus_tc(
             make_fsfw_action_cmd(
                 object_id=PLOC_SUPV_ID,
-                action_id=SupvActionIds.FACTORY_RESET,
+                action_id=SupvActionId.FACTORY_RESET,
                 user_data=bytes([key]),
             )
         )
@@ -290,35 +290,35 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         restart_tries = int(input("Specify maximum restart tries: "))
         command = (
             object_id.as_bytes
-            + struct.pack("!I", SupvActionIds.SET_MAX_RESTART_TRIES)
+            + struct.pack("!I", SupvActionId.SET_MAX_RESTART_TRIES)
             + struct.pack("!B", restart_tries)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "9":
         q.add_log_cmd("PLOC Supervisor: Reset MPSoC")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.RESET_MPSOC)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.RESET_MPSOC)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.SET_TIME_REF:
         q.add_log_cmd("PLOC Supervisor: Set time reference")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.SET_TIME_REF)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.SET_TIME_REF)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "11":
         q.add_log_cmd("PLOC Supervisor: Set boot timeout")
         boot_timeout = int(input("Specify boot timeout [ms]: "))
         command = (
             object_id.as_bytes
-            + struct.pack("!I", SupvActionIds.SET_BOOT_TIMEOUT)
+            + struct.pack("!I", SupvActionId.SET_BOOT_TIMEOUT)
             + struct.pack("!I", boot_timeout)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "12":
         q.add_log_cmd("PLOC Supervisor: Disable HK")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.DISABLE_HK)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.DISABLE_HK)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.REQ_BOOT_STATUS_REPORT:
         q.add_log_cmd(f"{prefix}:  {Info.REQ_BOOT_STATUS_REPORT}")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.GET_BOOT_STATUS_REPORT
+            "!I", SupvActionId.GET_BOOT_STATUS_REPORT
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
         q.add_wait_seconds(2.0)
@@ -352,13 +352,13 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
     if op_code == "26":
         q.add_log_cmd("PLOC Supervisor: Request latchup status report")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.GET_LATCHUP_STATUS_REPORT
+            "!I", SupvActionId.GET_LATCHUP_STATUS_REPORT
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "27":
         q.add_log_cmd("PLOC Supervisor: Copy ADC data to MRAM")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.COPY_ADC_DATA_TO_MRAM
+            "!I", SupvActionId.COPY_ADC_DATA_TO_MRAM
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "30":
@@ -380,7 +380,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
     if op_code == "37":
         q.add_log_cmd("PLOC Supervisor: Restart supervisor")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.RESTART_SUPERVISOR
+            "!I", SupvActionId.RESTART_SUPERVISOR
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.START_UPDATE:
@@ -394,14 +394,12 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
     if op_code == "43":
         q.add_log_cmd("PLOC Supervisor: Terminate supervisor process")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.TERMINATE_SUPV_HELPER
+            "!I", SupvActionId.TERMINATE_SUPV_HELPER
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "44":
         q.add_log_cmd("PLOC Supervisor: Start MPSoC quiet")
-        command = object_id.as_bytes + struct.pack(
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.START_MPSOC_QUIET)
-            "!I", SupvActionIds.START_MPSOC_QUIET
-        )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "45":
         q.add_log_cmd("PLOC Supervisor: Set shutdown timeout")
@@ -409,15 +407,15 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.FACTORY_FLASH:
         q.add_log_cmd(f"{prefix}: {Info.FACTORY_FLASH}")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.FACTORY_FLASH)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.FACTORY_FLASH)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "47":
         q.add_log_cmd("PLOC Supervisor: Enable auto TM")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.ENABLE_AUTO_TM)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.ENABLE_AUTO_TM)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "48":
         q.add_log_cmd("PLOC Supervisor: Disable auto TM")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.DISABLE_AUTO_TM)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.DISABLE_AUTO_TM)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "51":
         q.add_log_cmd("PLOC Supervisor: Logging request event buffers")
@@ -426,7 +424,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
     if op_code == "52":
         q.add_log_cmd("PLOC Supervisor: Logging clear counters")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.LOGGING_CLEAR_COUNTERS
+            "!I", SupvActionId.LOGGING_CLEAR_COUNTERS
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "53":
@@ -436,18 +434,18 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
     if op_code == "54":
         q.add_log_cmd("PLOC Supervisor: Logging request counters")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.LOGGING_REQUEST_COUNTERS
+            "!I", SupvActionId.LOGGING_REQUEST_COUNTERS
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "55":
         q.add_log_cmd("PLOC Supervisor: Request ADC report")
         command = object_id.as_bytes + struct.pack(
-            "!I", SupvActionIds.REQUEST_ADC_REPORT
+            "!I", SupvActionId.REQUEST_ADC_REPORT
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "56":
         q.add_log_cmd("PLOC Supervisor: Reset PL")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.RESET_PL)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.RESET_PL)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "57":
         q.add_log_cmd("PLOC Supervisor: Enable NVMs")
@@ -455,14 +453,14 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
         nvm3 = int(input("Enable (1) or disable(0) NVM 3: "))
         command = (
             object_id.as_bytes
-            + struct.pack("!I", SupvActionIds.ENABLE_NVMS)
+            + struct.pack("!I", SupvActionId.ENABLE_NVMS)
             + struct.pack("B", nvm01)
             + struct.pack("B", nvm3)
         )
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code == "58":
         q.add_log_cmd("PLOC Supervisor: Continue update")
-        command = object_id.as_bytes + struct.pack("!I", SupvActionIds.CONTINUE_UPDATE)
+        command = object_id.as_bytes + struct.pack("!I", SupvActionId.CONTINUE_UPDATE)
         q.add_pus_tc(PusTelecommand(service=8, subservice=128, app_data=command))
     if op_code in OpCodes.MEM_CHECK:
         custom_data = bytearray()
@@ -478,7 +476,7 @@ def pack_ploc_supv_commands(p: ServiceProviderParams):
             f"address {start_address}"
         )
         command = make_fsfw_action_cmd(
-            object_id.as_bytes, SupvActionIds.MEM_CHECK, custom_data
+            object_id.as_bytes, SupvActionId.MEM_CHECK, custom_data
         )
         q.add_pus_tc(command)
 
@@ -493,7 +491,7 @@ def pack_sel_boot_image_cmd(
     @param bp1  Partition pin 1
     @param bp2  Partition pin 2
     """
-    command = object_id + struct.pack("!I", SupvActionIds.SEL_MPSOC_BOOT_IMAGE)
+    command = object_id + struct.pack("!I", SupvActionId.SEL_MPSOC_BOOT_IMAGE)
     command = command + struct.pack("!B", mem)
     command = command + struct.pack("!B", bp0)
     command = command + struct.pack("!B", bp1)
@@ -511,7 +509,7 @@ def pack_update_available_cmd(object_id: bytes) -> bytearray:
     image_size = 222
     image_crc = 0x0
     number_of_packets = 150
-    command = object_id + struct.pack("!I", SupvActionIds.UPDATE_AVAILABLE)
+    command = object_id + struct.pack("!I", SupvActionId.UPDATE_AVAILABLE)
     command = command + struct.pack("!B", image_select)
     command = command + struct.pack("!B", image_partition)
     command = command + struct.pack("!I", image_size)
@@ -529,9 +527,9 @@ def pack_lachtup_alert_cmd(object_id: bytes, state: bool) -> bytearray:
     latchup_id = get_latchup_id()
     command = bytearray()
     if state:
-        command = object_id + struct.pack("!I", SupvActionIds.ENABLE_LATCHUP_ALERT)
+        command = object_id + struct.pack("!I", SupvActionId.ENABLE_LATCHUP_ALERT)
     else:
-        command = object_id + struct.pack("!I", SupvActionIds.DISABLE_LATCHUP_ALERT)
+        command = object_id + struct.pack("!I", SupvActionId.DISABLE_LATCHUP_ALERT)
     command = command + struct.pack("!B", latchup_id)
     return bytearray(command)
 
@@ -560,7 +558,7 @@ def pack_set_alert_limit_cmd(object_id: bytes) -> bytearray:
     latchup_id = get_latchup_id()
     dutycycle = int(input("Specify dutycycle: "))
     command = bytearray()
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ALERT_LIMIT)
+    command = object_id + struct.pack("!I", SupvActionId.SET_ALERT_LIMIT)
     command = command + struct.pack("!B", latchup_id)
     command = command + struct.pack("!I", dutycycle)
     return bytearray(command)
@@ -572,7 +570,7 @@ def pack_set_adc_enabled_channels_cmd(object_id: bytes) -> bytearray:
     @param object_id    The object id of the PLOC supervisor handler.
     """
     ch = int(input("Specify ch: 0x"), 16)
-    cmd = object_id + struct.pack("!I", SupvActionIds.SET_ADC_ENABLED_CHANNELS)
+    cmd = object_id + struct.pack("!I", SupvActionId.SET_ADC_ENABLED_CHANNELS)
     cmd = cmd + struct.pack("!H", ch)
     return bytearray(cmd)
 
@@ -580,7 +578,7 @@ def pack_set_adc_enabled_channels_cmd(object_id: bytes) -> bytearray:
 def pack_set_adc_window_and_stride_cmd(object_id: bytes) -> bytearray:
     window_size = int(input("Specify window size: "))
     striding_step_size = int(input("Specify striding step size: "))
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_WINDOW_AND_STRIDE)
+    command = object_id + struct.pack("!I", SupvActionId.SET_ADC_WINDOW_AND_STRIDE)
     command = command + struct.pack("!H", window_size)
     command = command + struct.pack("!H", striding_step_size)
     return bytearray(command)
@@ -588,21 +586,21 @@ def pack_set_adc_window_and_stride_cmd(object_id: bytes) -> bytearray:
 
 def pack_set_adc_threshold_cmd(object_id: bytes) -> bytearray:
     threshold = int(input("Specify threshold: "))
-    command = object_id + struct.pack("!I", SupvActionIds.SET_ADC_THRESHOLD)
+    command = object_id + struct.pack("!I", SupvActionId.SET_ADC_THRESHOLD)
     command = command + struct.pack("!I", threshold)
     return bytearray(command)
 
 
 def pack_select_nvm_cmd(object_id: bytes) -> bytearray:
     mem = int(input("Specify NVM (0 - NVM0, 1 - MVM1): "))
-    command = object_id + struct.pack("!I", SupvActionIds.SELECT_NVM)
+    command = object_id + struct.pack("!I", SupvActionId.SELECT_NVM)
     command = command + struct.pack("!B", mem)
     return bytearray(command)
 
 
 def pack_auto_em_tests_cmd(object_id: bytes) -> bytearray:
     test = int(input("Specify test (1 - complete, 2 - short): "))
-    command = object_id + struct.pack("!I", SupvActionIds.RUN_AUTO_EM_TESTS)
+    command = object_id + struct.pack("!I", SupvActionId.RUN_AUTO_EM_TESTS)
     command = command + struct.pack("!B", test)
     return bytearray(command)
 
@@ -610,7 +608,7 @@ def pack_auto_em_tests_cmd(object_id: bytes) -> bytearray:
 def pack_mram_wipe_cmd(object_id: bytes) -> bytearray:
     start = int(input("Start address: 0x"), 16)
     stop = int(input("Stop address: 0x"), 16)
-    command = object_id + struct.pack("!I", SupvActionIds.WIPE_MRAM)
+    command = object_id + struct.pack("!I", SupvActionId.WIPE_MRAM)
     command = command + struct.pack("!I", start)
     command = command + struct.pack("!I", stop)
     return bytearray(command)
@@ -642,7 +640,7 @@ def pack_update_command(object_id: bytes, new_update: bool) -> bytearray:
         else:
             raise ValueError("Invalid input, use y or n")
     command += object_id
-    command += struct.pack("!I", SupvActionIds.PERFORM_UPDATE)
+    command += struct.pack("!I", SupvActionId.PERFORM_UPDATE)
     command += bytearray(update_file, "utf-8")
     # Adding null terminator
     command += struct.pack("!B", 0)
@@ -657,7 +655,7 @@ def pack_update_command(object_id: bytes, new_update: bool) -> bytearray:
 def pack_set_shutdown_timeout_command(object_id: bytes) -> bytearray:
     command = bytearray()
     command += object_id
-    command += struct.pack("!I", SupvActionIds.SET_SHUTDOWN_TIMEOUT)
+    command += struct.pack("!I", SupvActionId.SET_SHUTDOWN_TIMEOUT)
     timeout = int(input("Specify shutdown timeout (ms): "))
     command += struct.pack("!I", timeout)
     return command
@@ -666,7 +664,7 @@ def pack_set_shutdown_timeout_command(object_id: bytes) -> bytearray:
 def pack_logging_buffer_request(object_id: bytes) -> bytearray:
     command = bytearray()
     command += object_id
-    command += struct.pack("!I", SupvActionIds.LOGGING_REQUEST_EVENT_BUFFERS)
+    command += struct.pack("!I", SupvActionId.LOGGING_REQUEST_EVENT_BUFFERS)
     path = get_event_buffer_path()
     command += bytearray(path, "utf-8")
     return command
@@ -676,7 +674,7 @@ def pack_set_gpio_cmd(object_id: bytes) -> bytearray:
     port = int(input("Specify port: 0x"), 16)
     pin = int(input("Specify pin: 0x"), 16)
     val = int(input("Specify val: 0x"), 16)
-    command = object_id + struct.pack("!I", SupvActionIds.SET_GPIO)
+    command = object_id + struct.pack("!I", SupvActionId.SET_GPIO)
     command = command + struct.pack("!B", port)
     command = command + struct.pack("!B", pin)
     command = command + struct.pack("!B", val)
@@ -686,14 +684,14 @@ def pack_set_gpio_cmd(object_id: bytes) -> bytearray:
 def pack_read_gpio_cmd(object_id: bytes) -> bytearray:
     port = int(input("Specify port: 0x"), 16)
     pin = int(input("Specify pin: 0x"), 16)
-    command = object_id + struct.pack("!I", SupvActionIds.READ_GPIO)
+    command = object_id + struct.pack("!I", SupvActionId.READ_GPIO)
     command = command + struct.pack("!B", port)
     command = command + struct.pack("!B", pin)
     return bytearray(command)
 
 
 def pack_logging_set_topic(object_id: bytes) -> bytearray:
-    command = object_id + struct.pack("!I", SupvActionIds.LOGGING_SET_TOPIC)
+    command = object_id + struct.pack("!I", SupvActionId.LOGGING_SET_TOPIC)
     tpc = int(input("Specify logging topic: "))
     command += struct.pack("!B", tpc)
     return bytearray(command)

eive_tmtc/tmtc/power/acu.py

@@ -42,7 +42,7 @@ class ACUHkTable:
     wdt_gnd_left = gs.TableEntry(bytearray([0x00, 0x74]), gs.TableEntry.uint32_size)
 
 
-class OpCodes:
+class OpCode:
     TEST = ["0", "test"]
 
 
@@ -55,7 +55,7 @@ def add_acu_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
     add_gomspace_cmd_defs(oce)
 
-    oce.add(keys=OpCodes.TEST, info=Info.TEST)
+    oce.add(keys=OpCode.TEST, info=Info.TEST)
     defs.add_service(
         name=CustomServiceList.ACU.value,
         info="ACU Device",

eive_tmtc/tmtc/power/common_power.py

@@ -27,7 +27,7 @@ from tmtccmd.tc.pus_8_funccmd import make_fsfw_action_cmd
 from tmtccmd.util import ObjectIdU32, ObjectIdBase
 
 
-class GomspaceOpCodes:
+class GomspaceOpCode:
     GET_PARAM = ["get_param"]
     SET_INTEGER_PARAM = ["set_int_param"]
     SAVE_TABLE = ["save_table"]
@@ -157,20 +157,20 @@ def pack_common_gomspace_cmds(
                 object_id=objb, action_id=GomspaceDeviceActionIds.PRINT_LATCHUPS
             )
         )
-    if op_code in GomspaceOpCodes.SET_INTEGER_PARAM:
+    if op_code in GomspaceOpCode.SET_INTEGER_PARAM:
         q.add_log_cmd(f"{prefix}: {GsInfo.SET_PARAMETER}")
         print("Please specify the parameter type from index")
         for idx, v in enumerate(ParamTypes):
             print(f"{idx}: {v.name}")
         ptype = int(input("Index: "))
         prompt_and_pack_set_integer_param_command(q, object_id, ParamTypes(ptype))
-    if op_code in GomspaceOpCodes.GET_PARAM:
+    if op_code in GomspaceOpCode.GET_PARAM:
         q.add_log_cmd(f"{prefix}: {GsInfo.GET_PARAMETER}")
         prompt_and_pack_get_param_command(q, object_id)
-    if op_code in GomspaceOpCodes.REQUEST_CONFIG_TABLE:
+    if op_code in GomspaceOpCode.REQUEST_CONFIG_TABLE:
         q.add_log_cmd(f"{prefix}: {GsInfo.REQUEST_CONFIG_TABLE}")
         q.add_pus_tc(pack_request_config_command(object_id.as_bytes))
-    if op_code in GomspaceOpCodes.SAVE_TABLE:
+    if op_code in GomspaceOpCode.SAVE_TABLE:
         q.add_log_cmd(f"{prefix}: {GsInfo.SAVE_TABLE}")
         source_table = int(
             input(
@@ -193,7 +193,7 @@ def pack_common_gomspace_cmds(
                 user_data=bytes([source_table]),
             )
         )
-    if op_code in GomspaceOpCodes.SAVE_TABLE_DEFAULT:
+    if op_code in GomspaceOpCode.SAVE_TABLE_DEFAULT:
         source_table = int(
             input(
                 "Source table [0: Board Config, 1: Module Config, 2: Calibration Parameter]: "
@@ -208,7 +208,7 @@ def pack_common_gomspace_cmds(
                 user_data=bytes([source_table]),
             )
         )
-    if op_code in GomspaceOpCodes.LOAD_TABLE:
+    if op_code in GomspaceOpCode.LOAD_TABLE:
         target_table = int(
             input(
                 "Target table ID [0: Board Config, 1: Module Config, 2: Calibration Parameter, "
@@ -236,7 +236,7 @@ def pack_common_gomspace_cmds(
                 user_data=bytes([source_table, target_table]),
             )
         )
-    if op_code in GomspaceOpCodes.RESET_GND_WATCHDOG:
+    if op_code in GomspaceOpCode.RESET_GND_WATCHDOG:
         q.add_log_cmd(f"{prefix}: {GsInfo.RESET_GND_WATCHDOG}")
         q.add_pus_tc(pack_gnd_wdt_reset_command(object_id))
 
@@ -316,14 +316,14 @@ def add_gomspace_cmd_defs(oce: OpCodeEntry):
         info=PowerInfo.REQUEST_AUX_HK_ONCE,
     )
     oce.add(keys=PowerOpCodes.PRINT_LATCHUPS, info=PowerInfo.PRINT_LATCHUPS)
-    oce.add(keys=GomspaceOpCodes.GET_PARAM, info=GsInfo.GET_PARAMETER)
+    oce.add(keys=GomspaceOpCode.GET_PARAM, info=GsInfo.GET_PARAMETER)
-    oce.add(keys=GomspaceOpCodes.REBOOT, info=GsInfo.REBOOT)
+    oce.add(keys=GomspaceOpCode.REBOOT, info=GsInfo.REBOOT)
-    oce.add(keys=GomspaceOpCodes.SET_INTEGER_PARAM, info=GsInfo.SET_PARAMETER)
+    oce.add(keys=GomspaceOpCode.SET_INTEGER_PARAM, info=GsInfo.SET_PARAMETER)
-    oce.add(keys=GomspaceOpCodes.REQUEST_CONFIG_TABLE, info=GsInfo.REQUEST_CONFIG_TABLE)
+    oce.add(keys=GomspaceOpCode.REQUEST_CONFIG_TABLE, info=GsInfo.REQUEST_CONFIG_TABLE)
-    oce.add(keys=GomspaceOpCodes.SAVE_TABLE, info=GsInfo.SAVE_TABLE)
+    oce.add(keys=GomspaceOpCode.SAVE_TABLE, info=GsInfo.SAVE_TABLE)
-    oce.add(keys=GomspaceOpCodes.SAVE_TABLE_DEFAULT, info=GsInfo.SAVE_TABLE_DEFAULT)
+    oce.add(keys=GomspaceOpCode.SAVE_TABLE_DEFAULT, info=GsInfo.SAVE_TABLE_DEFAULT)
-    oce.add(keys=GomspaceOpCodes.LOAD_TABLE, info=GsInfo.LOAD_TABLE)
+    oce.add(keys=GomspaceOpCode.LOAD_TABLE, info=GsInfo.LOAD_TABLE)
-    oce.add(keys=GomspaceOpCodes.RESET_GND_WATCHDOG, info=GsInfo.RESET_GND_WATCHDOG)
+    oce.add(keys=GomspaceOpCode.RESET_GND_WATCHDOG, info=GsInfo.RESET_GND_WATCHDOG)
 
 
 OBC_ENDIANNESS = "<"

eive_tmtc/tmtc/power/p60dock.py

@@ -27,7 +27,7 @@ from eive_tmtc.config.object_ids import P60_DOCK_HANDLER
 from tmtccmd.util import ObjectIdU32
 
 
-class P60OpCodes:
+class P60OpCode:
     STACK_3V3_ON = ["stack_3v3_on", "1"]
     STACK_3V3_OFF = ["stack_3v3_off", "2"]
     STACK_5V_ON = ["stack_5v_on", "3"]
@@ -103,7 +103,7 @@ def pack_p60dock_cmds(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code:
     pack_common_power_cmds("P60 Dock", object_id, q, op_code)
     pack_common_gomspace_cmds("P60 Dock", object_id, q, op_code)
     p60_dock_req_hk_cmds(q, op_code)
-    if op_code in P60OpCodes.STACK_3V3_ON:
+    if op_code in P60OpCode.STACK_3V3_ON:
         q.add_log_cmd(P60Info.STACK_3V3_ON)
         q.add_pus_tc(
             pack_set_u8_param_command(
@@ -112,7 +112,7 @@ def pack_p60dock_cmds(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code:
                 Channel.on,
             )
         )
-    if op_code in P60OpCodes.STACK_3V3_OFF:
+    if op_code in P60OpCode.STACK_3V3_OFF:
         q.add_log_cmd(P60Info.STACK_3V3_OFF)
         q.add_pus_tc(
             pack_set_u8_param_command(
@@ -121,7 +121,7 @@ def pack_p60dock_cmds(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code:
                 Channel.off,
             )
         )
-    if op_code in P60OpCodes.STACK_5V_ON:
+    if op_code in P60OpCode.STACK_5V_ON:
         q.add_log_cmd(P60Info.STACK_5V_ON)
         q.add_pus_tc(
             pack_set_u8_param_command(
@@ -130,7 +130,7 @@ def pack_p60dock_cmds(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_code:
                 Channel.on,
             )
         )
-    if op_code in P60OpCodes.STACK_5V_OFF:
+    if op_code in P60OpCode.STACK_5V_OFF:
         q.add_log_cmd(P60Info.STACK_5V_OFF)
         q.add_pus_tc(
             pack_set_u8_param_command(

eive_tmtc/tmtc/power/pdu1.py

@@ -15,7 +15,7 @@ from eive_tmtc.tmtc.power.common_power import (
     create_generic_on_cmd,
     create_generic_off_cmd,
     pack_common_power_cmds,
-    GomspaceOpCodes,
+    GomspaceOpCode,
     GsInfo,
     PowerInfo,
     add_common_power_defs,
@@ -166,7 +166,7 @@ def add_pdu1_cmds(defs: TmtcDefinitionWrapper):
         keys=PowerOpCodes.PRINT_SWITCH_V_I,
         info="PDU1: Print Switches, Voltages, Currents",
     )
-    oce.add(keys=GomspaceOpCodes.GET_PARAM, info=GsInfo.GET_PARAMETER)
+    oce.add(keys=GomspaceOpCode.GET_PARAM, info=GsInfo.GET_PARAMETER)
 
     defs.add_service(
         name=CustomServiceList.PDU1.value,

eive_tmtc/tmtc/power/power.py

@@ -27,7 +27,7 @@ from eive_tmtc.tmtc.power.pdu2 import (
 from tmtccmd import get_console_logger
 from tmtccmd.config import TmtcDefinitionWrapper, OpCodeEntry
 
-from eive_tmtc.tmtc.power.p60dock import P60OpCodes, P60Info, p60_dock_req_hk_cmds
+from eive_tmtc.tmtc.power.p60dock import P60OpCode, P60Info, p60_dock_req_hk_cmds
 from eive_tmtc.tmtc.power.acu import add_acu_cmds, acu_req_hk_cmds
 from tmtccmd.config.tmtc import tmtc_definitions_provider
 from tmtccmd.tc import DefaultPusQueueHelper
@@ -75,12 +75,12 @@ def pack_power_commands(q: DefaultPusQueueHelper, op_code: str):
 @tmtc_definitions_provider
 def add_p60_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=P60OpCodes.STACK_3V3_ON, info=P60Info.STACK_3V3_ON)
+    oce.add(keys=P60OpCode.STACK_3V3_ON, info=P60Info.STACK_3V3_ON)
-    oce.add(keys=P60OpCodes.STACK_3V3_OFF, info=P60Info.STACK_3V3_OFF)
+    oce.add(keys=P60OpCode.STACK_3V3_OFF, info=P60Info.STACK_3V3_OFF)
-    oce.add(keys=P60OpCodes.STACK_5V_ON, info=P60Info.STACK_5V_ON)
+    oce.add(keys=P60OpCode.STACK_5V_ON, info=P60Info.STACK_5V_ON)
-    oce.add(keys=P60OpCodes.STACK_5V_OFF, info=P60Info.STACK_5V_OFF)
+    oce.add(keys=P60OpCode.STACK_5V_OFF, info=P60Info.STACK_5V_OFF)
     add_gomspace_cmd_defs(oce)
-    oce.add(keys=P60OpCodes.TEST, info="P60 Tests")
+    oce.add(keys=P60OpCode.TEST, info="P60 Tests")
     defs.add_service(
         name=CustomServiceList.P60DOCK.value, info="P60 Device", op_code_entry=oce
     )