removed empty line

config/definitions.py

@@ -32,7 +32,6 @@ class CustomServiceList(enum.Enum):
     REACTION_WHEEL_3 = "reaction_wheel_3"
     REACTION_WHEEL_4 = "reaction_wheel_4"
     RAD_SENSOR = "rad_sensor"
-    PLOC_UPDATER = "ploc_updater"
     GPS_0 = "gps0"
     GPS_1 = "gps1"
     PLOC_MEMORY_DUMPER = "ploc_memory_dumper"

config/events.csv

@@ -1,187 +1,199 @@
-2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2203;0x089b;STORE_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2205;0x089d;STORING_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2211;0x08a3;INIT_DONE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2212;0x08a4;DUMP_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2213;0x08a5;DELETION_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2214;0x08a6;DELETION_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
-2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
-2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw/src/fsfw/power/Fuse.h
-4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw/src/fsfw/power/Fuse.h
-4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
-4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
-4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw/src/fsfw/power/PowerSwitchIF.h
-5000;0x1388;HEATER_ON;INFO;;fsfw/src/fsfw/thermal/Heater.h
-5001;0x1389;HEATER_OFF;INFO;;fsfw/src/fsfw/thermal/Heater.h
-5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7400;0x1ce8;CHANGING_MODE;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
-7401;0x1ce9;MODE_INFO;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
-7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
-7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
-7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw/src/fsfw/modes/HasModesIF.h
-7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7506;0x1d52;HEALTH_INFO;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
-7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
-7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
-7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
-7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-8900;0x22c4;CLOCK_SET;INFO;;fsfw/src/fsfw/pus/Service9TimeManagement.h
-8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw/src/fsfw/pus/Service9TimeManagement.h
-9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
-10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
-11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
-11402;0x2c8a;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
-11403;0x2c8b;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
-11404;0x2c8c;MAIN_SWITCH_TIMEOUT;LOW;;mission/devices/HeaterHandler.h
-11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
-11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
-11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQ_CNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/RwHandler.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report;linux/devices/ploc/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
-12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
-12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
-12200;0x2fa8;UPDATE_FILE_NOT_EXISTS;LOW;;linux/devices/ploc/PlocUpdater.h
-12201;0x2fa9;ACTION_COMMANDING_FAILED;LOW;Failed to send command to supervisor handler P1: Return value of CommandActionHelper::commandAction P2: Action ID of command to send;linux/devices/ploc/PlocUpdater.h
-12202;0x2faa;UPDATE_AVAILABLE_FAILED;LOW;Supervisor handler replied action message indicating a command execution failure of the update available command;linux/devices/ploc/PlocUpdater.h
-12203;0x2fab;UPDATE_TRANSFER_FAILED;LOW;Supervisor handler failed to transfer an update space packet. P1: Parameter holds the number of update packets already sent (inclusive the failed packet);linux/devices/ploc/PlocUpdater.h
-12204;0x2fac;UPDATE_VERIFY_FAILED;LOW;Supervisor failed to execute the update verify command.;linux/devices/ploc/PlocUpdater.h
-12205;0x2fad;UPDATE_FINISHED;INFO;MPSoC update successful completed;linux/devices/ploc/PlocUpdater.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
-12401;0x3071;INVALID_TC_FRAME;HIGH;;linux/obc/PdecHandler.h
-12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/obc/PdecHandler.h
-12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/obc/PdecHandler.h
-12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/obc/PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
-12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
-12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
-12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
-12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux/devices/startracker/StrHelper.h
-12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
-12602;0x313a;SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12605;0x313d;MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12606;0x313e;MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12607;0x313f;ACK_FAILURE_REPORT;LOW;Received acknowledgement failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12608;0x3140;EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12609;0x3141;ACK_INVALID_APID;LOW;Expected acknowledgement report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12610;0x3142;EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
-13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
-13600;0x3520;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
-13601;0x3521;REBOOT_SW;MEDIUM; Software reboot occured. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-13602;0x3522;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
-13603;0x3523;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
+2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2203;0x089b;STORE_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2205;0x089d;STORING_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2211;0x08a3;INIT_DONE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2212;0x08a4;DUMP_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2213;0x08a5;DELETION_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2214;0x08a6;DELETION_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
+2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
+2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw\src\fsfw\power\Fuse.h
+4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw\src\fsfw\power\Fuse.h
+4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
+4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
+4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw\src\fsfw\power\PowerSwitchIF.h
+5000;0x1388;HEATER_ON;INFO;;fsfw\src\fsfw\thermal\Heater.h
+5001;0x1389;HEATER_OFF;INFO;;fsfw\src\fsfw\thermal\Heater.h
+5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7400;0x1ce8;CHANGING_MODE;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
+7401;0x1ce9;MODE_INFO;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
+7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
+7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
+7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw\src\fsfw\modes\HasModesIF.h
+7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7506;0x1d52;HEALTH_INFO;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
+7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
+7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
+7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
+7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+8900;0x22c4;CLOCK_SET;INFO;;fsfw\src\fsfw\pus\Service9TimeManagement.h
+8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw\src\fsfw\pus\Service9TimeManagement.h
+9700;0x25e4;TEST;INFO;;fsfw\src\fsfw\pus\Service17Test.h
+10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw\hal\src\fsfw_hal\devicehandlers\MgmLIS3MDLHandler.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a swithc state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission\devices\HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission\devices\HeaterHandler.h
+11402;0x2c8a;SWITCH_ALREADY_ON;LOW;;mission\devices\HeaterHandler.h
+11403;0x2c8b;SWITCH_ALREADY_OFF;LOW;;mission\devices\HeaterHandler.h
+11404;0x2c8c;MAIN_SWITCH_TIMEOUT;LOW;;mission\devices\HeaterHandler.h
+11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
+11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
+11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux\devices\ploc\PlocMPSoCHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux\devices\ploc\PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux\devices\ploc\PlocMPSoCHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission\devices\IMTQHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission\devices\RwHandler.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux\devices\startracker\StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux\devices\startracker\StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux\devices\ploc\PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux\devices\ploc\PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux\devices\ploc\PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux\devices\ploc\PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_MPSOC_SHUWDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux\devices\ploc\PlocSupervisorHandler.h
+12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s\memory\SdCardManager.h
+12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s\memory\SdCardManager.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux\devices\ploc\PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux\devices\ploc\PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux\devices\ploc\PlocMemoryDumper.h
+12401;0x3071;INVALID_TC_FRAME;HIGH;;linux\obc\PdecHandler.h
+12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux\obc\PdecHandler.h
+12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux\obc\PdecHandler.h
+12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux\obc\PdecHandler.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux\devices\startracker\StrHelper.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux\devices\startracker\StrHelper.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux\devices\startracker\StrHelper.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux\devices\startracker\StrHelper.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux\devices\startracker\StrHelper.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux\devices\startracker\StrHelper.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux\devices\startracker\StrHelper.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux\devices\startracker\StrHelper.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux\devices\startracker\StrHelper.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
+12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux\devices\startracker\StrHelper.h
+12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux\devices\startracker\StrHelper.h
+12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux\devices\startracker\StrHelper.h
+12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux\devices\startracker\StrHelper.h
+12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux\devices\startracker\StrHelper.h
+12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux\devices\startracker\StrHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux\devices\ploc\PlocMPSoCHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux\devices\ploc\PlocMPSoCHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocMPSoCHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHelper.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission\devices\PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\AcsBoardAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\SusAssembly.h
+13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission\system\TcsBoardAssembly.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission\devices\devicedefinitions\GPSDefinitions.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission\devices\P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission\devices\P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission\devices\P60DockHandler.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux\devices\ploc\PlocSupvHelper.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux\devices\ploc\PlocSupvHelper.h
+13602;0x3522;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux\devices\ploc\PlocSupvHelper.h
+13603;0x3523;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux\devices\ploc\PlocSupvHelper.h
+13604;0x3524;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux\devices\ploc\PlocSupvHelper.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux\devices\ploc\PlocSupvHelper.h
+13606;0x3526;SUPV_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocSupvHelper.h
+13607;0x3527;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13608;0x3528;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13609;0x3529;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocSupvHelper.h
+13610;0x352a;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13611;0x352b;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13612;0x352c;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux\devices\ploc\PlocSupvHelper.h
+13613;0x352d;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13614;0x352e;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13615;0x352f;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux\devices\ploc\PlocSupvHelper.h
+13616;0x3530;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux\devices\ploc\PlocSupvHelper.h
+13700;0x3584;ALLOC_FAILURE;MEDIUM;;bsp_q7s\core\CoreController.h
+13701;0x3585;REBOOT_SW;MEDIUM; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s\core\CoreController.h
+13702;0x3586;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s\core\CoreController.h
+13703;0x3587;REBOOT_HW;MEDIUM;;bsp_q7s\core\CoreController.h

config/object_ids.py

@@ -61,7 +61,6 @@ PDEC_HANDLER_ID = bytes([0x50, 0x00, 0x07, 0x00])
 STAR_TRACKER_ID = bytes([0x44, 0x13, 0x00, 0x1])
 RAD_SENSOR_ID = bytes([0x44, 0x32, 0x00, 0xA5])
 PLOC_SUPV_ID = bytes([0x44, 0x33, 0x00, 0x16])
-PLOC_UPDATER_ID = bytes([0x44, 0x33, 0x00, 0x00])
 PLOC_MEMORY_DUMPER_ID = bytes([0x44, 0x33, 0x00, 0x01])
 STR_IMG_HELPER_ID = bytes([0x44, 0x33, 0x00, 0x02])
 PLOC_MPSOC_ID = bytes([0x44, 0x33, 0x00, 0x15])

config/objects.csv

@@ -4,18 +4,18 @@
 0x43400001;THERMAL_CONTROLLER
 0x44120006;MGM_0_LIS3_HANDLER
 0x44120010;GYRO_0_ADIS_HANDLER
-0x44120032;SUS_0
-0x44120033;SUS_1
-0x44120034;SUS_2
-0x44120035;SUS_3
-0x44120036;SUS_4
-0x44120037;SUS_5
-0x44120038;SUS_6
-0x44120039;SUS_7
-0x44120040;SUS_8
-0x44120041;SUS_9
-0x44120042;SUS_10
-0x44120043;SUS_11
+0x44120032;SUS_0_N_LOC_XFYFZM_PT_XF
+0x44120033;SUS_1_N_LOC_XBYFZM_PT_XB
+0x44120034;SUS_2_N_LOC_XFYBZB_PT_YB
+0x44120035;SUS_3_N_LOC_XFYBZF_PT_YF
+0x44120036;SUS_4_N_LOC_XMYFZF_PT_ZF
+0x44120037;SUS_5_N_LOC_XFYMZB_PT_ZB
+0x44120038;SUS_6_R_LOC_XFYBZM_PT_XF
+0x44120039;SUS_7_R_LOC_XBYBZM_PT_XB
+0x44120040;SUS_8_R_LOC_XBYBZB_PT_YB
+0x44120041;SUS_9_R_LOC_XBYBZB_PT_YF
+0x44120042;SUS_10_N_LOC_XMYBZF_PT_ZF
+0x44120043;SUS_11_R_LOC_XBYMZB_PT_ZB
 0x44120047;RW1
 0x44120107;MGM_1_RM3100_HANDLER
 0x44120111;GYRO_1_L3G_HANDLER
@@ -37,7 +37,6 @@
 0x44260000;BPX_BATT_HANDLER
 0x44300000;PLPCDU_HANDLER
 0x443200A5;RAD_SENSOR
-0x44330000;PLOC_UPDATER
 0x44330001;PLOC_MEMORY_DUMPER
 0x44330002;STR_HELPER
 0x44330003;PLOC_MPSOC_HELPER
@@ -48,22 +47,22 @@
 0x444100A4;HEATER_HANDLER
 0x44420004;TMP1075_HANDLER_1
 0x44420005;TMP1075_HANDLER_2
-0x44420016;RTD_IC_3
-0x44420017;RTD_IC_4
-0x44420018;RTD_IC_5
-0x44420019;RTD_IC_6
-0x44420020;RTD_IC_7
-0x44420021;RTD_IC_8
-0x44420022;RTD_IC_9
-0x44420023;RTD_IC_10
-0x44420024;RTD_IC_11
-0x44420025;RTD_IC_12
-0x44420026;RTD_IC_13
-0x44420027;RTD_IC_14
-0x44420028;RTD_IC_15
-0x44420029;RTD_IC_16
-0x44420030;RTD_IC_17
-0x44420031;RTD_IC_18
+0x44420016;RTD_0_IC3_PLOC_HEATSPREADER
+0x44420017;RTD_1_IC4_PLOC_MISSIONBOARD
+0x44420018;RTD_2_IC5_4K_CAMERA
+0x44420019;RTD_3_IC6_DAC_HEATSPREADER
+0x44420020;RTD_4_IC7_STARTRACKER
+0x44420021;RTD_5_IC8_RW1_MX_MY
+0x44420022;RTD_6_IC9_DRO
+0x44420023;RTD_7_IC10_SCEX
+0x44420024;RTD_8_IC11_X8
+0x44420025;RTD_9_IC12_HPA
+0x44420026;RTD_10_IC13_PL_TX
+0x44420027;RTD_11_IC14_MPA
+0x44420028;RTD_12_IC15_ACU
+0x44420029;RTD_13_IC16_PLPCDU_HEATSPREADER
+0x44420030;RTD_14_IC17_TCS_BOARD
+0x44420031;RTD_15_IC18_IMTQ
 0x445300A3;SYRLINKS_HK_HANDLER
 0x49000000;ARDUINO_COM_IF
 0x49010005;GPIO_IF

pus_tc/cmd_definitions.py

@@ -541,6 +541,8 @@ def add_ploc_mpsoc_cmds(cmd_dict: ServiceOpCodeDictT):
         "14": ("Ploc MPSoC: Mode replay", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "15": ("Ploc MPSoC: Mode idle", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "16": ("Ploc MPSoC: Tc cam command send", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "17": ("Ploc MPSoC: Set UART TX tristate" , {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "18": ("Ploc MPSoC: Relesase UART TX", {OpCodeDictKeys.TIMEOUT: 2.0}),
     }
     service_ploc_mpsoc_tuple = ("Ploc MPSoC", op_code_dict_srv_ploc_mpsoc)
     cmd_dict[CustomServiceList.PLOC_MPSOC.value] = service_ploc_mpsoc_tuple
@@ -622,6 +624,7 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
         "54": ("PLOC Supervisor: Logging request counters", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "55": ("PLOC Supervisor: Request ADC Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
         "56": ("PLOC Supervisor: Reset PL", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "57": ("PLOC Supervisor: Enable NVMs", {OpCodeDictKeys.TIMEOUT: 2.0}),
     }
     service_ploc_supv_tuple = ("PLOC Supervisor", op_code_dict_srv_ploc_supv)
 
@@ -659,9 +662,7 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
             {OpCodeDictKeys.TIMEOUT: 2.0},
         ),
     }
-    service_ploc_updater_tuple = ("Ploc Updater", op_code_dict_srv_ploc_updater)
     cmd_dict[CustomServiceList.PLOC_SUPV.value] = service_ploc_supv_tuple
-    cmd_dict[CustomServiceList.PLOC_UPDATER.value] = service_ploc_updater_tuple
     cmd_dict[
         CustomServiceList.PLOC_MEMORY_DUMPER.value
     ] = service_ploc_memory_dumper_tuple

pus_tc/devs/ploc_mpsoc.py

@@ -53,6 +53,8 @@ class CommandIds(enum.IntEnum):
     TC_MODE_REPLAY = 16
     TC_CAM_CMD_SEND = 17
     TC_MODE_IDLE = 18
+    SET_UART_TX_TRISTATE = 20
+    RELEASE_UART_TX = 21
 
 
 class MemAddresses(enum.IntEnum):
@@ -64,7 +66,6 @@ class PlocReplyIds(enum.IntEnum):
     TM_CAM_CMD_RPT = 19
 
 
-
 def pack_ploc_mpsoc_commands(
     object_id: bytearray, tc_queue: TcQueueT, op_code: str
 ) -> TcQueueT:
@@ -177,6 +178,16 @@ def pack_ploc_mpsoc_commands(
         command = object_id + struct.pack("!I", CommandIds.TC_CAM_CMD_SEND) + bytearray(cam_cmd, 'utf-8')
         command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
+    elif op_code == "17":
+        tc_queue.appendleft((QueueCommands.PRINT, "PLOC MPSoC: Set UART TX tristate"))
+        command = object_id + struct.pack("!I", CommandIds.SET_UART_TX_TRISTATE)
+        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())
+    elif op_code == "18":
+        tc_queue.appendleft((QueueCommands.PRINT, "PLOC MPSoC: Release UART TX"))
+        command = object_id + struct.pack("!I", CommandIds.RELEASE_UART_TX)
+        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())
 
     return tc_queue
 

pus_tc/devs/ploc_supervisor.py

@@ -87,6 +87,7 @@ class SupvActionIds:
     LOGGING_SET_TOPIC = 56
     REQUEST_ADC_REPORT = 57
     RESET_PL = 58
+    ENABLE_NVMS = 59
 
 
 class SupvHkIds:
@@ -266,7 +267,7 @@ def pack_ploc_supv_commands(
         tc_queue.appendleft(
             (QueueCommands.PRINT, "PLOC Supervisor: Restart supervisor")
         )
-        command = command = object_id + struct.pack(
+        command =  object_id + struct.pack(
             "!I", SupvActionIds.RESTART_SUPERVISOR
         )
         command = PusTelecommand(service=8, subservice=128, ssc=52, app_data=command)
@@ -275,7 +276,7 @@ def pack_ploc_supv_commands(
         tc_queue.appendleft(
             (QueueCommands.PRINT, "PLOC Supervisor: Factory reset clear all")
         )
-        command = command = object_id + struct.pack(
+        command = object_id + struct.pack(
             "!I", SupvActionIds.FACTORY_RESET_CLEAR_ALL
         )
         command = PusTelecommand(service=8, subservice=128, ssc=53, app_data=command)
@@ -296,7 +297,7 @@ def pack_ploc_supv_commands(
                 "PLOC Supervisor: Factory reset clear circular entries",
             )
         )
-        command = command = object_id + struct.pack(
+        command = object_id + struct.pack(
             "!I", SupvActionIds.FACTORY_RESET_CLEAR_CIRCULAR
         )
         command = PusTelecommand(service=8, subservice=128, ssc=55, app_data=command)
@@ -378,6 +379,14 @@ def pack_ploc_supv_commands(
         command = object_id + struct.pack('!I', SupvActionIds.RESET_PL)
         command = PusTelecommand(service=8, subservice=128, ssc=71, app_data=command)
         tc_queue.appendleft(command.pack_command_tuple())
+    elif op_code == "57":
+        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Enable NVMs"))
+        nvm01 = int(input("Enable (1) or disable(0) NVM 0 and 1: "))
+        nvm3 = int(input("Enable (1) or disable(0) NVM 3: "))
+        command = object_id + struct.pack('!I', SupvActionIds.ENABLE_NVMS) + struct.pack('B', nvm01) + \
+                  struct.pack('B', nvm3)
+        command = PusTelecommand(service=8, subservice=128, ssc=72, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())
 
     return tc_queue
 
@@ -599,7 +608,7 @@ def pack_logging_buffer_request(object_id: bytearray) -> bytearray:
 
 
 def pack_set_gpio_cmd(object_id: bytearray) -> bytearray:
-    port = int(input("Specify port : 0x"), 16)
+    port = int(input("Specify port: 0x"), 16)
     pin = int(input("Specify pin: 0x"), 16)
     val = int(input("Specify val: 0x"), 16)
     command = object_id + struct.pack("!I", SupvActionIds.SET_GPIO)

pus_tc/devs/ploc_upater.py

@@ -1,148 +0,0 @@
-# -*- coding: utf-8 -*-
-"""
-@file   ploc_udpater.py
-@brief  Commands to initiate update transfer to ploc supervisor. This only updates the software of the MPSoC, it is not
-        possible to update the software of the supervisor.
-        The supervisor is programmed by Thales.
-@author J. Meier
-@date   10.07.2021
-"""
-import struct
-
-from tmtccmd.config.definitions import QueueCommands
-
-from tmtccmd.tc.packer import TcQueueT
-from spacepackets.ecss.tc import PusTelecommand
-
-
-latchup_id_dict = {
-    "0": "0.85V",
-    "1": "1.8V",
-    "2": "MISC",
-    "3": "3.3V",
-    "4": "NVM_4XO",
-    "5": "MISSION",
-    "6": "SAFECOTS",
-}
-
-
-class UpdaterActionIds:
-    UPDATE_A_UBOOT = 0
-    UPDATE_A_BITSTREAM = 1
-    UPDATE_A_LINUX = 2
-    UPDATE_A_APP_SW = 3
-    UPDATE_B_UBOOT = 4
-    UPDATE_B_BITSTREAM = 5
-    UPDATE_B_LINUX = 6
-    UPDATE_B_LINUX = 7
-
-
-class ImagePathDefs:
-    imageAuboot = "/mnt/sd0/ploc/updateAuboot.bin"
-    imageAbitsream = "/mnt/sd0/ploc/updateAbitstream.bin"
-    imageAlinux = "/mnt/sd0/ploc/updateAlinux.bin"
-    imageAappsw = "/mnt/sd0/ploc/updateAappsw.bin"
-    imageBuboot = "/mnt/sd0/ploc/updateBuboot.bin"
-    imageBbitsream = "/mnt/sd0/ploc/updateBbitstream.bin"
-    imageBlinux = "/mnt/sd0/ploc/updateBlinux.bin"
-    imageBappsw = "/mnt/sd0/ploc/updateBappsw.bin"
-
-
-def pack_ploc_updater_test_into(
-    object_id: bytearray, tc_queue: TcQueueT, op_code: str
-) -> TcQueueT:
-    tc_queue.appendleft(
-        (
-            QueueCommands.PRINT,
-            "Testing PLOC updater with object id: 0x" + object_id.hex(),
-        )
-    )
-
-    if op_code == "0":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update uboot on partition A")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_A_UBOOT)
-            + bytearray(ImagePathDefs.imageAuboot, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=30, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "1":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update bitstream on parition A")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_A_BITSTREAM)
-            + bytearray(ImagePathDefs.imageAbitsream, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=31, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "2":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update linux on partition A")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_A_LINUX)
-            + bytearray(ImagePathDefs.imageAlinux, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "3":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update application on partition A")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_A_APP_SW)
-            + bytearray(ImagePathDefs.imageAappsw, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "4":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update uboot on partition B")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_B_UBOOT)
-            + bytearray(ImagePathDefs.imageBuboot, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=30, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "5":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update bitstream on parition B")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_B_BITSTREAM)
-            + bytearray(ImagePathDefs.imageBbitsream, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=31, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "6":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update linux on partition B")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_B_LINUX)
-            + bytearray(ImagePathDefs.imageBlinux, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=32, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-    if op_code == "7":
-        tc_queue.appendleft(
-            (QueueCommands.PRINT, "PLOC Supervisor: Update application on partition B")
-        )
-        command = (
-            object_id
-            + struct.pack("!I", UpdaterActionIds.UPDATE_B_APP_SW)
-            + bytearray(ImagePathDefs.imageBappsw, "utf-8")
-        )
-        command = PusTelecommand(service=8, subservice=128, ssc=33, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())

pus_tc/tc_packer_hook.py

@@ -29,7 +29,6 @@ from pus_tc.devs.ploc_supervisor import pack_ploc_supv_commands
 from pus_tc.devs.heater import pack_heater_test_into
 from pus_tc.devs.reaction_wheels import pack_single_rw_test_into
 from pus_tc.devs.rad_sensor import pack_rad_sensor_test_into
-from pus_tc.devs.ploc_upater import pack_ploc_updater_test_into
 from pus_tc.devs.ploc_memory_dumper import pack_ploc_memory_dumper_cmd
 from pus_tc.devs.ccsds_handler import pack_ccsds_handler_test
 from pus_tc.system.core import pack_core_commands
@@ -58,7 +57,6 @@ from config.object_ids import (
     RW4_ID,
     RAD_SENSOR_ID,
     PLOC_SUPV_ID,
-    PLOC_UPDATER_ID,
     STAR_TRACKER_ID,
     PLOC_MEMORY_DUMPER_ID,
     GPS_HANDLER_0_ID,
@@ -175,11 +173,6 @@ def pack_service_queue_user(
         return pack_ploc_supv_commands(
             object_id=object_id, tc_queue=service_queue, op_code=op_code
         )
-    if service == CustomServiceList.PLOC_UPDATER.value:
-        object_id = PLOC_UPDATER_ID
-        return pack_ploc_updater_test_into(
-            object_id=object_id, tc_queue=service_queue, op_code=op_code
-        )
     if service == CustomServiceList.STAR_TRACKER.value:
         object_id = STAR_TRACKER_ID
         return pack_star_tracker_commands(