eive_tmtc/tmtc/acs/imtq.py

@@ -41,7 +41,8 @@ class OpCode:
     NORMAL = "normal"
     OFF = "off"
     SET_DIPOLE = "set_dipole"
-    REQUEST_ENG_HK_NO_TORQUE = "hk_os_eng_hk"
+    REQUEST_ENG_HK_NO_TORQUE = "hk_os_eng_hk_no_torque"
+    REQUEST_ENG_HK_WITH_TORQUE = "hk_os_eng_hk_with_torque"
     REQUEST_MGM_RAW_NO_TORQUE = "hk_os_mgm_raw_no_torque"
     ENABLE_MGM_RAW_NO_TORQUE = "enb_mgm_raw_no_torque"
     DISABLE_MGM_RAW_NO_TORQUE = "dis_mgm_raw_no_torque"
@@ -50,6 +51,8 @@ class OpCode:
     DISABLE_MGM_RAW_WITH_TORQUE = "dis_mgm_raw_with_torque"
     ENABLE_ENG_HK_NO_TORQUE = "enb_eng_hk_no_torque"
     DISABLE_ENG_HK_NO_TORQUE = "dis_eng_hk_no_torque"
+    ENABLE_ENG_HK_WITH_TORQUE = "enb_eng_hk_with_torque"
+    DISABLE_ENG_HK_WITH_TORQUE = "dis_eng_hk_with_torque"
     POS_X_SELF_TEST = "self_test_pos_x"
     NEG_X_SELF_TEST = "self_test_neg_x"
     POS_Y_SELF_TEST = "self_test_pos_y"
@@ -96,6 +99,14 @@ def add_imtq_cmds(defs: TmtcDefinitionWrapper):
     oce.add(OpCode.ON, "Mode On")
     oce.add(OpCode.NORMAL, "Mode Normal")
     oce.add(OpCode.REQUEST_ENG_HK_NO_TORQUE, "Request Engineering HK One Shot")
+    oce.add(
+        OpCode.REQUEST_ENG_HK_WITH_TORQUE,
+        "Request Engineering HK One Shot during Torque",
+    )
+    oce.add(OpCode.ENABLE_ENG_HK_NO_TORQUE, "Enable ENG HK not torque")
+    oce.add(OpCode.ENABLE_ENG_HK_WITH_TORQUE, "Enable ENG HK with torque")
+    oce.add(OpCode.DISABLE_ENG_HK_NO_TORQUE, "Disable ENG HK not torque")
+    oce.add(OpCode.DISABLE_ENG_HK_WITH_TORQUE, "Disable ENG HK with torque")
     oce.add(
         OpCode.REQUEST_MGM_RAW_NO_TORQUE, "Request MGM Raw Without Torque HK One Shot"
     )
@@ -250,8 +261,35 @@ def pack_imtq_test_into(object_id: ObjectIdU32, q: DefaultPusQueueHelper, op_cod
                 True, make_sid(object_id.as_bytes, ImtqSetId.ENG_HK_NO_TORQUE)
             )
         )
+    if op_code == OpCode.REQUEST_ENG_HK_WITH_TORQUE:
+        q.add_log_cmd("IMTQ: Get engineering hk set with torque")
+        q.add_pus_tc(
+            create_request_one_diag_command(
+                sid=make_sid(
+                    object_id=object_id.as_bytes,
+                    set_id=ImtqSetId.ENG_HK_SET_WITH_TORQUE,
+                )
+            )
+        )
+    if op_code == OpCode.ENABLE_ENG_HK_WITH_TORQUE:
+        q.add_log_cmd("IMTQ: Enable ENG HK with torque")
+        interval = float(input("Please enter collection interval in seconds: "))
+        cmds = create_enable_periodic_hk_command_with_interval(
+            diag=True,
+            sid=make_sid(object_id.as_bytes, ImtqSetId.ENG_HK_SET_WITH_TORQUE),
+            interval_seconds=interval,
+        )
+        for cmd in cmds:
+            q.add_pus_tc(cmd)
+    if op_code == OpCode.DISABLE_ENG_HK_WITH_TORQUE:
+        q.add_log_cmd("IMTQ: Disable ENG HK with Torque")
+        q.add_pus_tc(
+            create_disable_periodic_hk_command(
+                True, make_sid(object_id.as_bytes, ImtqSetId.ENG_HK_SET_WITH_TORQUE)
+            )
+        )
     if op_code == OpCode.REQUEST_ENG_HK_NO_TORQUE:
-        q.add_log_cmd("IMTQ: Get engineering hk set")
+        q.add_log_cmd("IMTQ: Get engineering hk set (no torque)")
         q.add_pus_tc(
             generate_one_diag_command(
                 sid=make_sid(
@@ -392,19 +430,15 @@ def handle_imtq_hk(printer: FsfwTmTcPrinter, hk_data: bytes, set_id: int):
     if (set_id >= ImtqSetId.POSITIVE_X_TEST) and (set_id <= ImtqSetId.NEGATIVE_Z_TEST):
         return handle_self_test_data(printer, hk_data)
     elif set_id == ImtqSetId.ENG_HK_NO_TORQUE:
-        _LOGGER.info("Found engineering HK without torque")
+        return handle_eng_set(printer, hk_data, False)
-        return handle_eng_set(printer, hk_data)
     elif set_id == ImtqSetId.ENG_HK_SET_WITH_TORQUE:
-        _LOGGER.info("Found engineering HK during torque")
+        return handle_eng_set(printer, hk_data, True)
-        return handle_eng_set(printer, hk_data)
     elif set_id == ImtqSetId.CAL_MTM_SET:
         return handle_calibrated_mtm_measurement(printer, hk_data)
     elif set_id == ImtqSetId.RAW_MTM_NO_TORQUE:
-        _LOGGER.info("Found raw MTM measurement without torque")
+        return handle_raw_mtm_measurement(printer, hk_data, False)
-        return handle_raw_mtm_measurement(printer, hk_data)
     elif set_id == ImtqSetId.RAW_MTM_WITH_TORQUE:
-        _LOGGER.info("Found raw MTM measurement during torque")
+        return handle_raw_mtm_measurement(printer, hk_data, True)
-        return handle_raw_mtm_measurement(printer, hk_data)
     elif set_id == ImtqSetId.STATUS_SET:
         return handle_status_set(printer, hk_data)
     else:
@@ -449,8 +483,9 @@ def unpack_eng_hk(hk_data: bytes) -> List:
     return content_list
 
 
-def handle_eng_set(printer: FsfwTmTcPrinter, hk_data: bytes):
+def handle_eng_set(printer: FsfwTmTcPrinter, hk_data: bytes, torque_on: bool):
     pw = PrintWrapper(printer)
+    pw.dlog(f"Found engineering HK. Torque Status: {torque_on}")
     content_list = unpack_eng_hk(hk_data)
     validity_buffer = hk_data[32:]
 
@@ -491,8 +526,11 @@ def handle_calibrated_mtm_measurement(printer: FsfwTmTcPrinter, hk_data: bytes):
     printer.print_validity_buffer(validity_buffer=validity_buffer, num_vars=num_of_vars)
 
 
-def handle_raw_mtm_measurement(printer: FsfwTmTcPrinter, hk_data: bytes):
+def handle_raw_mtm_measurement(
+    printer: FsfwTmTcPrinter, hk_data: bytes, torque_status: bool
+):
     pw = PrintWrapper(printer)
+    pw.dlog(f"Found raw MTM measurement. Torque Status: {torque_status}")
     header_list = [
         "Raw MTM X [nT]",
         "Raw MTM Y [nT]",