eive_tmtc/config/definitions.py

@@ -65,7 +65,8 @@ class CustomServiceList(str, enum.Enum):
     PL_SS = "pl_subsystem"
     ACS_BRD_ASS = "acs_brd_ass"
     SUS_BRD_ASS = "sus_brd_ass"
-    TCS = "tcs"
+    TCS_SS = "tcs_subsystem"
+    TCS_CTRL = "tcs_ctrl"
     TCS_ASS = "tcs_ass"
     TIME = "time"
     PROCEDURE = "proc"

eive_tmtc/pus_tc/procedure_packer.py

@@ -6,6 +6,7 @@ from typing import cast
 from eive_tmtc.tmtc.acs.gyros import handle_gyr_cmd
 from eive_tmtc.tmtc.acs.mgms import handle_mgm_cmd
 from eive_tmtc.tmtc.power.power import pack_power_commands
+from eive_tmtc.tmtc.tcs.ctrl import pack_tcs_ctrl_commands
 from eive_tmtc.tmtc.tcs.rtd import pack_rtd_commands
 from eive_tmtc.tmtc.payload.scex import pack_scex_cmds
 from eive_tmtc.tmtc.tcs.subsystem import pack_tcs_sys_commands
@@ -99,8 +100,10 @@ def handle_default_procedure(  # noqa C901: Complexity okay here.
     if service == CustomServiceList.ACU.value:
         object_id = cast(ObjectIdU32, obj_id_man.get(ACU_HANDLER_ID))
         return pack_acu_commands(object_id=object_id, q=queue_helper, op_code=op_code)
-    if service == CustomServiceList.TCS.value:
+    if service == CustomServiceList.TCS_SS.value:
         return pack_tcs_sys_commands(q=queue_helper, op_code=op_code)
+    if service == CustomServiceList.TCS_CTRL.value:
+        return pack_tcs_ctrl_commands(q=queue_helper, op_code=op_code)
     if service == CustomServiceList.TMP1075.value:
         menu_dict = {
             "0": ("TMP1075 TCS Board 0", TMP1075_HANDLER_TCS_BRD_0_ID),

eive_tmtc/pus_tm/hk_handling.py

@@ -48,10 +48,7 @@ FORWARD_SENSOR_TEMPS = False
 
 
 def handle_hk_packet(
-    raw_tm: bytes,
+    raw_tm: bytes, obj_id_dict: ObjectIdDictT, printer: FsfwTmTcPrinter, hk_level: int
-    obj_id_dict: ObjectIdDictT,
-    printer: FsfwTmTcPrinter,
-    hk_level: int
 ):
     tm_packet = Service3FsfwTm.unpack(raw_telemetry=raw_tm, custom_hk_handling=False)
     named_obj_id = obj_id_dict.get(tm_packet.object_id.as_bytes)

eive_tmtc/pus_tm/pus_demux.py

@@ -29,7 +29,7 @@ def pus_factory_hook(  # noqa C901 : Complexity okay here
     verif_wrapper: VerificationWrapper,
     printer: FsfwTmTcPrinter,
     raw_logger: RawTmtcTimedLogWrapper,
-    hk_level: int
+    hk_level: int,
 ):
     if len(packet) < 8:
         _LOGGER.warning("Detected packet shorter than 8 bytes!")
@@ -49,7 +49,9 @@ def pus_factory_hook(  # noqa C901 : Complexity okay here
     if service == 1:
         handle_service_1_fsfw_packet(wrapper=verif_wrapper, raw_tm=packet)
     elif service == 3:
-        handle_hk_packet(printer=printer, raw_tm=packet, obj_id_dict=obj_id_dict, hk_level=hk_level)
+        handle_hk_packet(
+            printer=printer, raw_tm=packet, obj_id_dict=obj_id_dict, hk_level=hk_level
+        )
     elif service == 5:
         handle_event_packet(raw_tm=packet, pw=pw)
     elif service == 8:

eive_tmtc/tmtc/tcs/ctrl.py

@@ -0,0 +1,74 @@
+from eive_tmtc.config.definitions import CustomServiceList
+from eive_tmtc.config.object_ids import TCS_CONTROLLER
+from eive_tmtc.tmtc.tcs import CtrlSetId
+from eive_tmtc.tmtc.tcs.brd_assy import pack_tcs_ass_cmds
+from eive_tmtc.tmtc.tcs.subsystem import InfoSys
+from tmtccmd.config.tmtc import (
+    tmtc_definitions_provider,
+    TmtcDefinitionWrapper,
+    OpCodeEntry,
+)
+from tmtccmd.tc import DefaultPusQueueHelper
+from tmtccmd.tc.pus_3_fsfw_hk import (
+    make_sid,
+    generate_one_hk_command,
+    create_request_one_diag_command,
+    create_enable_periodic_hk_command_with_interval,
+)
+
+
+class OpCode:
+    REQUEST_PRIMARY_TEMP_SET = "temp"
+    ENABLE_TEMP_SET = "enable_temp_set"
+    REQUEST_DEVICE_TEMP_SET = "temp_devs"
+    REQUEST_DEVICE_SUS_SET = "temp_sus"
+    REQUEST_HEATER_INFO = "heater_info"
+
+
+def pack_tcs_ctrl_commands(q: DefaultPusQueueHelper, op_code: str):
+    if op_code == OpCode.REQUEST_PRIMARY_TEMP_SET:
+        sensor_set_sid = make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS)
+        q.add_log_cmd(InfoSys.REQUEST_PRIMARY_TEMP_SET)
+        q.add_pus_tc(generate_one_hk_command(sensor_set_sid))
+    if op_code == OpCode.REQUEST_DEVICE_TEMP_SET:
+        q.add_log_cmd(InfoSys.REQUEST_DEVICE_TEMP_SET)
+        q.add_pus_tc(
+            generate_one_hk_command(make_sid(TCS_CONTROLLER, CtrlSetId.DEVICE_SENSORS))
+        )
+    if op_code == OpCode.REQUEST_DEVICE_SUS_SET:
+        q.add_log_cmd(InfoSys.REQUEST_DEVICE_SUS_SET)
+        q.add_pus_tc(
+            generate_one_hk_command(
+                make_sid(TCS_CONTROLLER, CtrlSetId.SUS_TEMP_SENSORS)
+            )
+        )
+    if op_code == OpCode.REQUEST_HEATER_INFO:
+        q.add_log_cmd(InfoSys.REQUEST_HEATER_INFO)
+        q.add_pus_tc(
+            create_request_one_diag_command(
+                make_sid(TCS_CONTROLLER, CtrlSetId.HEATER_INFO)
+            )
+        )
+    if op_code == OpCode.ENABLE_TEMP_SET:
+        interval_seconds = float(input("Please specify interval in seconds: "))
+        cmds = create_enable_periodic_hk_command_with_interval(
+            False, make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS), interval_seconds
+        )
+        for cmd in cmds:
+            q.add_pus_tc(cmd)
+    pack_tcs_ass_cmds(q, op_code)
+
+
+@tmtc_definitions_provider
+def add_tcs_ctrl_cmds(defs: TmtcDefinitionWrapper):
+    oce = OpCodeEntry()
+    oce.add(keys=OpCode.ENABLE_TEMP_SET, info=InfoSys.ENABLE_TEMP_SET)
+    oce.add(keys=OpCode.REQUEST_PRIMARY_TEMP_SET, info=InfoSys.REQUEST_PRIMARY_TEMP_SET)
+    oce.add(keys=OpCode.REQUEST_DEVICE_TEMP_SET, info=InfoSys.REQUEST_DEVICE_TEMP_SET)
+    oce.add(keys=OpCode.REQUEST_DEVICE_SUS_SET, info=InfoSys.REQUEST_DEVICE_SUS_SET)
+    oce.add(keys=OpCode.REQUEST_HEATER_INFO, info=InfoSys.REQUEST_HEATER_INFO)
+    defs.add_service(
+        name=CustomServiceList.TCS_CTRL,
+        info="TCS controller",
+        op_code_entry=oce,
+    )

eive_tmtc/tmtc/tcs/subsystem.py

@@ -1,6 +1,5 @@
-from .defs import CtrlSetId
 from eive_tmtc.config.definitions import CustomServiceList
-from eive_tmtc.config.object_ids import TCS_CONTROLLER, TCS_SUBSYSTEM_ID
+from eive_tmtc.config.object_ids import TCS_SUBSYSTEM_ID
 from eive_tmtc.tmtc.common import pack_mode_cmd_with_info
 from eive_tmtc.tmtc.tcs.brd_assy import pack_tcs_ass_cmds
 from tmtccmd.config.tmtc import (
@@ -10,22 +9,11 @@ from tmtccmd.config.tmtc import (
 )
 from tmtccmd.tc import DefaultPusQueueHelper
 from tmtccmd.tc.pus_200_fsfw_mode import Mode, create_announce_mode_recursive_command
-from tmtccmd.tc.pus_3_fsfw_hk import (
-    make_sid,
-    generate_one_hk_command,
-    create_enable_periodic_hk_command_with_interval,
-    create_request_one_diag_command,
-)
 
 
-class OpCodeSys:
+class OpCode:
-    OFF = ["off"]
+    OFF = "off"
-    NML = ["nml"]
+    NML = "nml"
-    REQUEST_PRIMARY_TEMP_SET = ["temp"]
-    ENABLE_TEMP_SET = "enable_temp_set"
-    REQUEST_DEVICE_TEMP_SET = ["temp_devs"]
-    REQUEST_DEVICE_SUS_SET = ["temp_sus"]
-    REQUEST_HEATER_INFO = "heater_info"
     ANNOUNCE_MODES = "announce_modes"
 
 
@@ -41,43 +29,13 @@ class InfoSys:
 
 
 def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
-    if op_code in OpCodeSys.REQUEST_PRIMARY_TEMP_SET:
+    if op_code == OpCode.OFF:
-        sensor_set_sid = make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS)
-        q.add_log_cmd(InfoSys.REQUEST_PRIMARY_TEMP_SET)
-        q.add_pus_tc(generate_one_hk_command(sensor_set_sid))
-    if op_code in OpCodeSys.REQUEST_DEVICE_TEMP_SET:
-        q.add_log_cmd(InfoSys.REQUEST_DEVICE_TEMP_SET)
-        q.add_pus_tc(
-            generate_one_hk_command(make_sid(TCS_CONTROLLER, CtrlSetId.DEVICE_SENSORS))
-        )
-    if op_code in OpCodeSys.REQUEST_DEVICE_SUS_SET:
-        q.add_log_cmd(InfoSys.REQUEST_DEVICE_SUS_SET)
-        q.add_pus_tc(
-            generate_one_hk_command(
-                make_sid(TCS_CONTROLLER, CtrlSetId.SUS_TEMP_SENSORS)
-            )
-        )
-    if op_code == OpCodeSys.REQUEST_HEATER_INFO:
-        q.add_log_cmd(InfoSys.REQUEST_HEATER_INFO)
-        q.add_pus_tc(
-            create_request_one_diag_command(
-                make_sid(TCS_CONTROLLER, CtrlSetId.HEATER_INFO)
-            )
-        )
-    if op_code in OpCodeSys.OFF:
         q.add_log_cmd(InfoSys.OFF)
         pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.OFF, 0, q, InfoSys.OFF)
-    if op_code in OpCodeSys.NML:
+    if op_code == OpCode.NML:
         q.add_log_cmd(InfoSys.NML)
         pack_mode_cmd_with_info(TCS_SUBSYSTEM_ID, Mode.NORMAL, 0, q, InfoSys.OFF)
-    if op_code == OpCodeSys.ENABLE_TEMP_SET:
+    if op_code == OpCode.ANNOUNCE_MODES:
-        interval_seconds = float(input("Please specify interval in seconds: "))
-        cmds = create_enable_periodic_hk_command_with_interval(
-            False, make_sid(TCS_CONTROLLER, CtrlSetId.PRIMARY_SENSORS), interval_seconds
-        )
-        for cmd in cmds:
-            q.add_pus_tc(cmd)
-    if op_code == OpCodeSys.ANNOUNCE_MODES:
         q.add_log_cmd(InfoSys.ANNOUNCE_MODES)
         q.add_pus_tc(create_announce_mode_recursive_command(TCS_SUBSYSTEM_ID))
     pack_tcs_ass_cmds(q, op_code)
@@ -86,20 +44,11 @@ def pack_tcs_sys_commands(q: DefaultPusQueueHelper, op_code: str):
 @tmtc_definitions_provider
 def add_tcs_subsystem_cmds(defs: TmtcDefinitionWrapper):
     oce = OpCodeEntry()
-    oce.add(keys=OpCodeSys.OFF, info=InfoSys.OFF)
+    oce.add(keys=OpCode.OFF, info=InfoSys.OFF)
-    oce.add(keys=OpCodeSys.NML, info=InfoSys.NML)
+    oce.add(keys=OpCode.NML, info=InfoSys.NML)
-    oce.add(
+    oce.add(keys=OpCode.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
-        keys=OpCodeSys.REQUEST_PRIMARY_TEMP_SET, info=InfoSys.REQUEST_PRIMARY_TEMP_SET
-    )
-    oce.add(
-        keys=OpCodeSys.REQUEST_DEVICE_TEMP_SET, info=InfoSys.REQUEST_DEVICE_TEMP_SET
-    )
-    oce.add(keys=OpCodeSys.REQUEST_DEVICE_SUS_SET, info=InfoSys.REQUEST_DEVICE_SUS_SET)
-    oce.add(keys=OpCodeSys.REQUEST_HEATER_INFO, info=InfoSys.REQUEST_HEATER_INFO)
-    oce.add(keys=OpCodeSys.ANNOUNCE_MODES, info=InfoSys.ANNOUNCE_MODES)
-    oce.add(keys=OpCodeSys.ENABLE_TEMP_SET, info=InfoSys.ENABLE_TEMP_SET)
     defs.add_service(
-        name=CustomServiceList.TCS,
+        name=CustomServiceList.TCS_SS,
-        info="TCS",
+        info="TCS subsystem",
         op_code_entry=oce,
     )

eive_tmtc/tmtc/tcs/tm.py

@@ -149,6 +149,7 @@ def handle_thermal_controller_hk_data(
         current_draw = struct.unpack("!H", hk_data[8:10])[0]
         print(f"Heater Power Channel Current Draw: {current_draw} mA")
     elif set_id == CtrlSetId.TCS_CTRL_INFO:
+        pw.dlog("Received TCS CTRL set")
         pass
     else:
         _LOGGER.warning(f"Unimplemented set ID {set_id}")

tmtcc.py

@@ -166,7 +166,7 @@ class PusHandler(SpecificApidHandlerBase):
         wrapper: VerificationWrapper,
         printer: FsfwTmTcPrinter,
         raw_logger: RawTmtcTimedLogWrapper,
-        hk_level: int
+        hk_level: int,
     ):
         super().__init__(PUS_APID, None)
         self.printer = printer
@@ -177,7 +177,9 @@ class PusHandler(SpecificApidHandlerBase):
     def handle_tm(self, packet: bytes, _user_args: any):
         # with open("tc.bin", "wb") as of:
         #    of.write(packet)
-        pus_factory_hook(packet, self.verif_wrapper, self.printer, self.raw_logger, self.hk_level)
+        pus_factory_hook(
+            packet, self.verif_wrapper, self.printer, self.raw_logger, self.hk_level
+        )
 
 
 class UnknownApidHandler(GenericApidHandlerBase):
@@ -408,7 +410,7 @@ def setup_tmtc_handlers(
     printer: FsfwTmTcPrinter,
     raw_logger: RawTmtcTimedLogWrapper,
     gui: bool,
-    hk_level: int
+    hk_level: int,
 ) -> (CcsdsTmHandler, TcHandler):
     cfdp_in_ccsds_wrapper = setup_cfdp_handler()
     verification_wrapper = VerificationWrapper(