2022-05-24 17:24:39 +02:00
16 changed files with 1066 additions and 868 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -10,6 +10,18 @@ list yields a list of all related PRs for each release.

 # [unreleased]

+# [v1.12.0]
+
+- Add Rad Sensor HK parsing
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/81
+- Add procedures, parser functions and general application functionalities
+  for the thermal-vacuum test. This includes daemon functionality to poll
+  all Telemetry even when there is no operator present
+  PR: https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/76
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/74
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/79
+  https://egit.irs.uni-stuttgart.de/eive/eive-tmtc/pulls/73
+
 # [v1.11.0]

 - Add `setup.cfg` and `setup.py` file, allowing package installation
--- a/config/definitions.py
+++ b/config/definitions.py
@ -48,5 +48,6 @@ class CustomServiceList(enum.Enum):
    TCS_ASS = "tcs-ass"
    TIME = "time"
    PROCEDURE = "proc"
+    RTD = "rtd"
    TVTTESTPROCEDURE = "tvtestproc"
    CONTROLLERS = "controllers"
--- a/config/events.csv
+++ b/config/events.csv
@ -1,204 +1,206 @@
-2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2203;0x089b;STORE_READ_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2205;0x089d;STORING_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2211;0x08a3;INIT_DONE;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2212;0x08a4;DUMP_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2213;0x08a5;DELETION_FINISHED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2214;0x08a6;DELETION_FAILED;LOW;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw/src/fsfw/tmstorage/TmStoreBackendIF.h
-2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
-2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw/src/fsfw/storagemanager/StorageManagerIF.h
-2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw/src/fsfw/devicehandlers/DeviceHandlerIF.h
-4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw/src/fsfw/power/Fuse.h
-4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw/src/fsfw/power/Fuse.h
-4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
-4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/power/Fuse.h
-4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw/src/fsfw/power/PowerSwitchIF.h
-5000;0x1388;HEATER_ON;INFO;;fsfw/src/fsfw/thermal/Heater.h
-5001;0x1389;HEATER_OFF;INFO;;fsfw/src/fsfw/thermal/Heater.h
-5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw/src/fsfw/thermal/Heater.h
-5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw/src/fsfw/thermal/AbstractTemperatureSensor.h
-5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw/src/fsfw/thermal/ThermalComponentIF.h
-7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw/src/fsfw/fdir/FailureIsolationBase.h
-7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw/src/fsfw/monitoring/MonitoringIF.h
-7400;0x1ce8;CHANGING_MODE;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
-7401;0x1ce9;MODE_INFO;INFO;;fsfw/src/fsfw/modes/HasModesIF.h
-7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
-7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw/src/fsfw/modes/HasModesIF.h
-7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw/src/fsfw/modes/HasModesIF.h
-7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw/src/fsfw/modes/HasModesIF.h
-7506;0x1d52;HEALTH_INFO;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
-7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw/src/fsfw/health/HasHealthIF.h
-7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
-7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw/src/fsfw/health/HasHealthIF.h
-7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw/src/fsfw/health/HasHealthIF.h
-7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw/src/fsfw/datalinklayer/DataLinkLayer.h
-8900;0x22c4;CLOCK_SET;INFO;;fsfw/src/fsfw/pus/Service9TimeManagement.h
-8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw/src/fsfw/pus/Service9TimeManagement.h
-9700;0x25e4;TEST;INFO;;fsfw/src/fsfw/pus/Service17Test.h
-10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw/hal/src/fsfw_hal/devicehandlers/MgmLIS3MDLHandler.h
-11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission/devices/devicedefinitions/powerDefinitions.h
-11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
-11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission/devices/devicedefinitions/powerDefinitions.h
-11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission/devices/HeaterHandler.h
-11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission/devices/HeaterHandler.h
-11402;0x2c8a;HEATER_WENT_ON;INFO;;mission/devices/HeaterHandler.h
-11403;0x2c8b;HEATER_WENT_OFF;INFO;;mission/devices/HeaterHandler.h
-11404;0x2c8c;SWITCH_ALREADY_ON;LOW;;mission/devices/HeaterHandler.h
-11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;;mission/devices/HeaterHandler.h
-11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;;mission/devices/HeaterHandler.h
-11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;;mission/devices/HeaterHandler.h
-11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
-11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission/devices/SolarArrayDeploymentHandler.h
-11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission/devices/SolarArrayDeploymentHandler.h
-11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux/devices/ploc/PlocMPSoCHandler.h
-11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux/devices/ploc/PlocMPSoCHandler.h
-11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux/devices/ploc/PlocMPSoCHandler.h
-11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHandler.h
-11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux/devices/ploc/PlocMPSoCHandler.h
-11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission/devices/IMTQHandler.h
-11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission/devices/IMTQHandler.h
-11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission/devices/devicedefinitions/RwDefinitions.h
-11802;0x2e1a;RESET_OCCURED;LOW;;mission/devices/devicedefinitions/RwDefinitions.h
-11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux/devices/startracker/StarTrackerHandler.h
-11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux/devices/startracker/StarTrackerHandler.h
-12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux/devices/ploc/PlocSupervisorHandler.h
-12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux/devices/ploc/PlocSupervisorHandler.h
-12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux/devices/ploc/PlocSupervisorHandler.h
-12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux/devices/ploc/PlocSupervisorHandler.h
-12005;0x2ee5;SUPV_MPSOC_SHUWDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux/devices/ploc/PlocSupervisorHandler.h
-12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s/memory/SdCardManager.h
-12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s/memory/SdCardManager.h
-12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux/devices/ploc/PlocMemoryDumper.h
-12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux/devices/ploc/PlocMemoryDumper.h
-12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux/devices/ploc/PlocMemoryDumper.h
-12401;0x3071;INVALID_TC_FRAME;HIGH;;linux/obc/PdecHandler.h
-12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux/obc/PdecHandler.h
-12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux/obc/PdecHandler.h
-12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux/obc/PdecHandler.h
-12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux/devices/startracker/StrHelper.h
-12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux/devices/startracker/StrHelper.h
-12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux/devices/startracker/StrHelper.h
-12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux/devices/startracker/StrHelper.h
-12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux/devices/startracker/StrHelper.h
-12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux/devices/startracker/StrHelper.h
-12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux/devices/startracker/StrHelper.h
-12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux/devices/startracker/StrHelper.h
-12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux/devices/startracker/StrHelper.h
-12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux/devices/startracker/StrHelper.h
-12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux/devices/startracker/StrHelper.h
-12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux/devices/startracker/StrHelper.h
-12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux/devices/startracker/StrHelper.h
-12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux/devices/startracker/StrHelper.h
-12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux/devices/startracker/StrHelper.h
-12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux/devices/startracker/StrHelper.h
-12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux/devices/ploc/PlocMPSoCHelper.h
-12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux/devices/ploc/PlocMPSoCHelper.h
-12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocMPSoCHelper.h
-12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocMPSoCHelper.h
-12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux/devices/ploc/PlocMPSoCHelper.h
-12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux/devices/ploc/PlocMPSoCHelper.h
-12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission/devices/PayloadPcduHandler.h
-12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission/devices/PayloadPcduHandler.h
-12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/AcsBoardAssembly.h
-12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/AcsBoardAssembly.h
-12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/AcsBoardAssembly.h
-12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/AcsBoardAssembly.h
-12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission/system/SusAssembly.h
-12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission/system/SusAssembly.h
-12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission/system/SusAssembly.h
-12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission/system/SusAssembly.h
-13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission/system/TcsBoardAssembly.h
-13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission/devices/devicedefinitions/GPSDefinitions.h
-13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission/devices/P60DockHandler.h
-13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission/devices/P60DockHandler.h
-13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission/devices/P60DockHandler.h
-13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux/devices/ploc/PlocSupvHelper.h
-13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux/devices/ploc/PlocSupvHelper.h
-13602;0x3522;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux/devices/ploc/PlocSupvHelper.h
-13603;0x3523;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux/devices/ploc/PlocSupvHelper.h
-13604;0x3524;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux/devices/ploc/PlocSupvHelper.h
-13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux/devices/ploc/PlocSupvHelper.h
-13606;0x3526;SUPV_SENDING_COMMAND_FAILED;LOW;;linux/devices/ploc/PlocSupvHelper.h
-13607;0x3527;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13608;0x3528;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13609;0x3529;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux/devices/ploc/PlocSupvHelper.h
-13610;0x352a;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13611;0x352b;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13612;0x352c;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux/devices/ploc/PlocSupvHelper.h
-13613;0x352d;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13614;0x352e;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux/devices/ploc/PlocSupvHelper.h
-13615;0x352f;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux/devices/ploc/PlocSupvHelper.h
-13616;0x3530;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux/devices/ploc/PlocSupvHelper.h
-13617;0x3531;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet with number P1 P1: Packet number for which the memory write command fails;linux/devices/ploc/PlocSupvHelper.h
-13700;0x3584;ALLOC_FAILURE;MEDIUM;;bsp_q7s/core/CoreController.h
-13701;0x3585;REBOOT_SW;MEDIUM; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s/core/CoreController.h
-13702;0x3586;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s/core/CoreController.h
-13703;0x3587;REBOOT_HW;MEDIUM;;bsp_q7s/core/CoreController.h
+2200;0x0898;STORE_SEND_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2201;0x0899;STORE_WRITE_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2202;0x089a;STORE_SEND_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2203;0x089b;STORE_READ_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2204;0x089c;UNEXPECTED_MSG;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2205;0x089d;STORING_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2206;0x089e;TM_DUMP_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2207;0x089f;STORE_INIT_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2208;0x08a0;STORE_INIT_EMPTY;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2209;0x08a1;STORE_CONTENT_CORRUPTED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2210;0x08a2;STORE_INITIALIZE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2211;0x08a3;INIT_DONE;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2212;0x08a4;DUMP_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2213;0x08a5;DELETION_FINISHED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2214;0x08a6;DELETION_FAILED;LOW;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2215;0x08a7;AUTO_CATALOGS_SENDING_FAILED;INFO;;fsfw\src\fsfw\tmstorage\TmStoreBackendIF.h
+2600;0x0a28;GET_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
+2601;0x0a29;STORE_DATA_FAILED;LOW;;fsfw\src\fsfw\storagemanager\StorageManagerIF.h
+2800;0x0af0;DEVICE_BUILDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2801;0x0af1;DEVICE_SENDING_COMMAND_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2802;0x0af2;DEVICE_REQUESTING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2803;0x0af3;DEVICE_READING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2804;0x0af4;DEVICE_INTERPRETING_REPLY_FAILED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2805;0x0af5;DEVICE_MISSED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2806;0x0af6;DEVICE_UNKNOWN_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2807;0x0af7;DEVICE_UNREQUESTED_REPLY;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2808;0x0af8;INVALID_DEVICE_COMMAND;LOW;Indicates a SW bug in child class.;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2809;0x0af9;MONITORING_LIMIT_EXCEEDED;LOW;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2810;0x0afa;MONITORING_AMBIGUOUS;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+2811;0x0afb;DEVICE_WANTS_HARD_REBOOT;HIGH;;fsfw\src\fsfw\devicehandlers\DeviceHandlerIF.h
+4201;0x1069;FUSE_CURRENT_HIGH;LOW;;fsfw\src\fsfw\power\Fuse.h
+4202;0x106a;FUSE_WENT_OFF;LOW;;fsfw\src\fsfw\power\Fuse.h
+4204;0x106c;POWER_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
+4205;0x106d;POWER_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\power\Fuse.h
+4300;0x10cc;SWITCH_WENT_OFF;LOW;;fsfw\src\fsfw\power\PowerSwitchIF.h
+5000;0x1388;HEATER_ON;INFO;;fsfw\src\fsfw\thermal\Heater.h
+5001;0x1389;HEATER_OFF;INFO;;fsfw\src\fsfw\thermal\Heater.h
+5002;0x138a;HEATER_TIMEOUT;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5003;0x138b;HEATER_STAYED_ON;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5004;0x138c;HEATER_STAYED_OFF;LOW;;fsfw\src\fsfw\thermal\Heater.h
+5200;0x1450;TEMP_SENSOR_HIGH;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5201;0x1451;TEMP_SENSOR_LOW;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5202;0x1452;TEMP_SENSOR_GRADIENT;LOW;;fsfw\src\fsfw\thermal\AbstractTemperatureSensor.h
+5901;0x170d;COMPONENT_TEMP_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5902;0x170e;COMPONENT_TEMP_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5903;0x170f;COMPONENT_TEMP_OOL_LOW;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5904;0x1710;COMPONENT_TEMP_OOL_HIGH;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+5905;0x1711;TEMP_NOT_IN_OP_RANGE;LOW;;fsfw\src\fsfw\thermal\ThermalComponentIF.h
+7101;0x1bbd;FDIR_CHANGED_STATE;INFO;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7102;0x1bbe;FDIR_STARTS_RECOVERY;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7103;0x1bbf;FDIR_TURNS_OFF_DEVICE;MEDIUM;;fsfw\src\fsfw\fdir\FailureIsolationBase.h
+7201;0x1c21;MONITOR_CHANGED_STATE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7202;0x1c22;VALUE_BELOW_LOW_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7203;0x1c23;VALUE_ABOVE_HIGH_LIMIT;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7204;0x1c24;VALUE_OUT_OF_RANGE;LOW;;fsfw\src\fsfw\monitoring\MonitoringIF.h
+7400;0x1ce8;CHANGING_MODE;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
+7401;0x1ce9;MODE_INFO;INFO;;fsfw\src\fsfw\modes\HasModesIF.h
+7402;0x1cea;FALLBACK_FAILED;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
+7403;0x1ceb;MODE_TRANSITION_FAILED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7404;0x1cec;CANT_KEEP_MODE;HIGH;;fsfw\src\fsfw\modes\HasModesIF.h
+7405;0x1ced;OBJECT_IN_INVALID_MODE;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7406;0x1cee;FORCING_MODE;MEDIUM;;fsfw\src\fsfw\modes\HasModesIF.h
+7407;0x1cef;MODE_CMD_REJECTED;LOW;;fsfw\src\fsfw\modes\HasModesIF.h
+7506;0x1d52;HEALTH_INFO;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
+7507;0x1d53;CHILD_CHANGED_HEALTH;INFO;;fsfw\src\fsfw\health\HasHealthIF.h
+7508;0x1d54;CHILD_PROBLEMS;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
+7509;0x1d55;OVERWRITING_HEALTH;LOW;;fsfw\src\fsfw\health\HasHealthIF.h
+7510;0x1d56;TRYING_RECOVERY;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7511;0x1d57;RECOVERY_STEP;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7512;0x1d58;RECOVERY_DONE;MEDIUM;;fsfw\src\fsfw\health\HasHealthIF.h
+7900;0x1edc;RF_AVAILABLE;INFO;A RF available signal was detected. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7901;0x1edd;RF_LOST;INFO;A previously found RF available signal was lost. P1: raw RFA state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7902;0x1ede;BIT_LOCK;INFO;A Bit Lock signal. Was detected. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7903;0x1edf;BIT_LOCK_LOST;INFO;A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+7905;0x1ee1;FRAME_PROCESSING_FAILED;LOW;The CCSDS Board could not interpret a TC;fsfw\src\fsfw\datalinklayer\DataLinkLayer.h
+8900;0x22c4;CLOCK_SET;INFO;;fsfw\src\fsfw\pus\Service9TimeManagement.h
+8901;0x22c5;CLOCK_SET_FAILURE;LOW;;fsfw\src\fsfw\pus\Service9TimeManagement.h
+9700;0x25e4;TEST;INFO;;fsfw\src\fsfw\pus\Service17Test.h
+10600;0x2968;CHANGE_OF_SETUP_PARAMETER;LOW;;fsfw\hal\src\fsfw_hal\devicehandlers\MgmLIS3MDLHandler.h
+11300;0x2c24;SWITCH_CMD_SENT;INFO;Indicates that a FSFW object requested setting a switch P1: 1 if on was requested, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
+11301;0x2c25;SWITCH_HAS_CHANGED;INFO;Indicated that a switch state has changed P1: New switch state, 1 for on, 0 for off | P2: Switch Index;mission\devices\devicedefinitions\powerDefinitions.h
+11302;0x2c26;SWITCHING_Q7S_DENIED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
+11303;0x2c27;FDIR_REACTION_IGNORED;MEDIUM;;mission\devices\devicedefinitions\powerDefinitions.h
+11400;0x2c88;GPIO_PULL_HIGH_FAILED;LOW;;mission\devices\HeaterHandler.h
+11401;0x2c89;GPIO_PULL_LOW_FAILED;LOW;;mission\devices\HeaterHandler.h
+11402;0x2c8a;HEATER_WENT_ON;INFO;;mission\devices\HeaterHandler.h
+11403;0x2c8b;HEATER_WENT_OFF;INFO;;mission\devices\HeaterHandler.h
+11404;0x2c8c;SWITCH_ALREADY_ON;LOW;;mission\devices\HeaterHandler.h
+11405;0x2c8d;SWITCH_ALREADY_OFF;LOW;;mission\devices\HeaterHandler.h
+11406;0x2c8e;MAIN_SWITCH_TIMEOUT;MEDIUM;;mission\devices\HeaterHandler.h
+11407;0x2c8f;FAULTY_HEATER_WAS_ON;LOW;;mission\devices\HeaterHandler.h
+11500;0x2cec;MAIN_SWITCH_ON_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
+11501;0x2ced;MAIN_SWITCH_OFF_TIMEOUT;LOW;;mission\devices\SolarArrayDeploymentHandler.h
+11502;0x2cee;DEPLOYMENT_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11503;0x2cef;DEPL_SA1_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11504;0x2cf0;DEPL_SA2_GPIO_SWTICH_ON_FAILED;HIGH;;mission\devices\SolarArrayDeploymentHandler.h
+11601;0x2d51;MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC crc failure in telemetry packet;linux\devices\ploc\PlocMPSoCHandler.h
+11602;0x2d52;ACK_FAILURE;LOW;PLOC receive acknowledgment failure report P1: Command Id which leads the acknowledgment failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
+11603;0x2d53;EXE_FAILURE;LOW;PLOC receive execution failure report P1: Command Id which leads the execution failure report P2: The status field inserted by the MPSoC into the data field;linux\devices\ploc\PlocMPSoCHandler.h
+11604;0x2d54;MPSOC_HANDLER_CRC_FAILURE;LOW;PLOC reply has invalid crc;linux\devices\ploc\PlocMPSoCHandler.h
+11605;0x2d55;MPSOC_HANDLER_SEQUENCE_COUNT_MISMATCH;LOW;Packet sequence count in received space packet does not match expected count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHandler.h
+11606;0x2d56;MPSOC_SHUTDOWN_FAILED;HIGH;Supervisor fails to shutdown MPSoC. Requires to power off the PLOC and thus also to shutdown the supervisor.;linux\devices\ploc\PlocMPSoCHandler.h
+11701;0x2db5;SELF_TEST_I2C_FAILURE;LOW;Get self test result returns I2C failure P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11702;0x2db6;SELF_TEST_SPI_FAILURE;LOW;Get self test result returns SPI failure. This concerns the MTM connectivity. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11703;0x2db7;SELF_TEST_ADC_FAILURE;LOW;Get self test result returns failure in measurement of current and temperature. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11704;0x2db8;SELF_TEST_PWM_FAILURE;LOW;Get self test result returns PWM failure which concerns the coil actuation. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11705;0x2db9;SELF_TEST_TC_FAILURE;LOW;Get self test result returns TC failure (system failure) P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11706;0x2dba;SELF_TEST_MTM_RANGE_FAILURE;LOW;Get self test result returns failure that MTM values were outside of the expected range. P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11707;0x2dbb;SELF_TEST_COIL_CURRENT_FAILURE;LOW;Get self test result returns failure indicating that the coil current was outside of the expected range P1: Indicates on which axis the failure occurred. 0 -> INIT, 1 -> +X, 2 -> -X, 3 -> +Y, 4 -> -Y, 5 -> +Z, 6 -> -Z, 7 -> FINA;mission\devices\IMTQHandler.h
+11708;0x2dbc;INVALID_ERROR_BYTE;LOW;Received invalid error byte. This indicates an error of the communication link between IMTQ and OBC.;mission\devices\IMTQHandler.h
+11801;0x2e19;ERROR_STATE;HIGH;Reaction wheel signals an error state;mission\devices\devicedefinitions\RwDefinitions.h
+11802;0x2e1a;RESET_OCCURED;LOW;;mission\devices\devicedefinitions\RwDefinitions.h
+11901;0x2e7d;BOOTING_FIRMWARE_FAILED;LOW;Failed to boot firmware;linux\devices\startracker\StarTrackerHandler.h
+11902;0x2e7e;BOOTING_BOOTLOADER_FAILED;LOW;Failed to boot star tracker into bootloader mode;linux\devices\startracker\StarTrackerHandler.h
+12001;0x2ee1;SUPV_MEMORY_READ_RPT_CRC_FAILURE;LOW;PLOC supervisor crc failure in telemetry packet;linux\devices\ploc\PlocSupervisorHandler.h
+12002;0x2ee2;SUPV_ACK_FAILURE;LOW;PLOC supervisor received acknowledgment failure report;linux\devices\ploc\PlocSupervisorHandler.h
+12003;0x2ee3;SUPV_EXE_FAILURE;LOW;PLOC received execution failure report P1: ID of command for which the execution failed P2: Status code sent by the supervisor handler;linux\devices\ploc\PlocSupervisorHandler.h
+12004;0x2ee4;SUPV_CRC_FAILURE_EVENT;LOW;PLOC supervisor reply has invalid crc;linux\devices\ploc\PlocSupervisorHandler.h
+12005;0x2ee5;SUPV_MPSOC_SHUWDOWN_BUILD_FAILED;LOW;Failed to build the command to shutdown the MPSoC;linux\devices\ploc\PlocSupervisorHandler.h
+12100;0x2f44;SANITIZATION_FAILED;LOW;;bsp_q7s\memory\SdCardManager.h
+12101;0x2f45;MOUNTED_SD_CARD;INFO;;bsp_q7s\memory\SdCardManager.h
+12300;0x300c;SEND_MRAM_DUMP_FAILED;LOW;Failed to send mram dump command to supervisor handler P1: Return value of commandAction function P2: Start address of MRAM to dump with this command;linux\devices\ploc\PlocMemoryDumper.h
+12301;0x300d;MRAM_DUMP_FAILED;LOW;Received completion failure report form PLOC supervisor handler P1: MRAM start address of failing dump command;linux\devices\ploc\PlocMemoryDumper.h
+12302;0x300e;MRAM_DUMP_FINISHED;LOW;MRAM dump finished successfully;linux\devices\ploc\PlocMemoryDumper.h
+12401;0x3071;INVALID_TC_FRAME;HIGH;;linux\obc\PdecHandler.h
+12402;0x3072;INVALID_FAR;HIGH;Read invalid FAR from PDEC after startup;linux\obc\PdecHandler.h
+12403;0x3073;CARRIER_LOCK;INFO;Carrier lock detected;linux\obc\PdecHandler.h
+12404;0x3074;BIT_LOCK_PDEC;INFO;Bit lock detected (data valid);linux\obc\PdecHandler.h
+12500;0x30d4;IMAGE_UPLOAD_FAILED;LOW;Image upload failed;linux\devices\startracker\StrHelper.h
+12501;0x30d5;IMAGE_DOWNLOAD_FAILED;LOW;Image download failed;linux\devices\startracker\StrHelper.h
+12502;0x30d6;IMAGE_UPLOAD_SUCCESSFUL;LOW;Uploading image to star tracker was successfulop;linux\devices\startracker\StrHelper.h
+12503;0x30d7;IMAGE_DOWNLOAD_SUCCESSFUL;LOW;Image download was successful;linux\devices\startracker\StrHelper.h
+12504;0x30d8;FLASH_WRITE_SUCCESSFUL;LOW;Finished flash write procedure successfully;linux\devices\startracker\StrHelper.h
+12505;0x30d9;FLASH_READ_SUCCESSFUL;LOW;Finished flash read procedure successfully;linux\devices\startracker\StrHelper.h
+12506;0x30da;FLASH_READ_FAILED;LOW;Flash read procedure failed;linux\devices\startracker\StrHelper.h
+12507;0x30db;FIRMWARE_UPDATE_SUCCESSFUL;LOW;Firmware update was successful;linux\devices\startracker\StrHelper.h
+12508;0x30dc;FIRMWARE_UPDATE_FAILED;LOW;Firmware update failed;linux\devices\startracker\StrHelper.h
+12509;0x30dd;STR_HELPER_READING_REPLY_FAILED;LOW;Failed to read communication interface reply data P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
+12510;0x30de;STR_HELPER_COM_ERROR;LOW;Unexpected stop of decoding sequence P1: Return code of failed communication interface read call P1: Upload/download position for which the read call failed;linux\devices\startracker\StrHelper.h
+12511;0x30df;STR_HELPER_NO_REPLY;LOW;Star tracker did not send replies (maybe device is powered off) P1: Position of upload or download packet for which no reply was sent;linux\devices\startracker\StrHelper.h
+12512;0x30e0;STR_HELPER_DEC_ERROR;LOW;Error during decoding of received reply occurred P1: Return value of decoding function P2: Position of upload/download packet, or address of flash write/read request;linux\devices\startracker\StrHelper.h
+12513;0x30e1;POSITION_MISMATCH;LOW;Position mismatch P1: The expected position and thus the position for which the image upload/download failed;linux\devices\startracker\StrHelper.h
+12514;0x30e2;STR_HELPER_FILE_NOT_EXISTS;LOW;Specified file does not exist P1: Internal state of str helper;linux\devices\startracker\StrHelper.h
+12515;0x30e3;STR_HELPER_SENDING_PACKET_FAILED;LOW;;linux\devices\startracker\StrHelper.h
+12516;0x30e4;STR_HELPER_REQUESTING_MSG_FAILED;LOW;;linux\devices\startracker\StrHelper.h
+12600;0x3138;MPSOC_FLASH_WRITE_FAILED;LOW;Flash write fails;linux\devices\ploc\PlocMPSoCHelper.h
+12601;0x3139;MPSOC_FLASH_WRITE_SUCCESSFUL;LOW;Flash write successful;linux\devices\ploc\PlocMPSoCHelper.h
+12602;0x313a;MPSOC_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocMPSoCHelper.h
+12603;0x313b;MPSOC_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12604;0x313c;MPSOC_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12605;0x313d;MPSOC_MISSING_ACK;LOW;Did not receive acknowledgment report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12606;0x313e;MPSOC_MISSING_EXE;LOW;Did not receive execution report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocMPSoCHelper.h
+12607;0x313f;MPSOC_ACK_FAILURE_REPORT;LOW;Received acknowledgment failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12608;0x3140;MPSOC_EXE_FAILURE_REPORT;LOW;Received execution failure report P1: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12609;0x3141;MPSOC_ACK_INVALID_APID;LOW;Expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12610;0x3142;MPSOC_EXE_INVALID_APID;LOW;Expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of MPSoC;linux\devices\ploc\PlocMPSoCHelper.h
+12611;0x3143;MPSOC_HELPER_SEQ_CNT_MISMATCH;LOW;Received sequence count does not match expected sequence count P1: Expected sequence count P2: Received sequence count;linux\devices\ploc\PlocMPSoCHelper.h
+12700;0x319c;TRANSITION_BACK_TO_OFF;MEDIUM;Could not transition properly and went back to ALL OFF;mission\devices\PayloadPcduHandler.h
+12701;0x319d;NEG_V_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12702;0x319e;U_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12703;0x319f;I_DRO_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12704;0x31a0;U_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12705;0x31a1;I_X8_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12706;0x31a2;U_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12707;0x31a3;I_TX_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12708;0x31a4;U_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12709;0x31a5;I_MPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12710;0x31a6;U_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12711;0x31a7;I_HPA_OUT_OF_BOUNDS;MEDIUM;P1: 0 -> too low, 1 -> too high P2: Float value;mission\devices\PayloadPcduHandler.h
+12800;0x3200;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\AcsBoardAssembly.h
+12801;0x3201;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\AcsBoardAssembly.h
+12802;0x3202;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\AcsBoardAssembly.h
+12803;0x3203;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\AcsBoardAssembly.h
+12900;0x3264;TRANSITION_OTHER_SIDE_FAILED;HIGH;;mission\system\SusAssembly.h
+12901;0x3265;NOT_ENOUGH_DEVICES_DUAL_MODE;HIGH;;mission\system\SusAssembly.h
+12902;0x3266;POWER_STATE_MACHINE_TIMEOUT;MEDIUM;;mission\system\SusAssembly.h
+12903;0x3267;SIDE_SWITCH_TRANSITION_NOT_ALLOWED;LOW;Not implemented, would increase already high complexity. Operator should instead command the assembly off first and then command the assembly on into the desired mode/submode combination;mission\system\SusAssembly.h
+13000;0x32c8;CHILDREN_LOST_MODE;MEDIUM;;mission\system\TcsBoardAssembly.h
+13100;0x332c;GPS_FIX_CHANGE;INFO;Fix has changed. P1: Old fix. P2: New fix 0: Not seen, 1: No Fix, 2: 2D-Fix, 3: 3D-Fix;mission\devices\devicedefinitions\GPSDefinitions.h
+13200;0x3390;P60_BOOT_COUNT;INFO;P60 boot count is broadcasted once at SW startup. P1: Boot count;mission\devices\P60DockHandler.h
+13201;0x3391;BATT_MODE;INFO;Battery mode is broadcasted at startup. P1: Mode;mission\devices\P60DockHandler.h
+13202;0x3392;BATT_MODE_CHANGED;MEDIUM;Battery mode has changed. P1: Old mode. P2: New mode;mission\devices\P60DockHandler.h
+13600;0x3520;SUPV_UPDATE_FAILED;LOW;update failed;linux\devices\ploc\PlocSupvHelper.h
+13601;0x3521;SUPV_UPDATE_SUCCESSFUL;LOW;update successful;linux\devices\ploc\PlocSupvHelper.h
+13602;0x3522;SUPV_CONTINUE_UPDATE_FAILED;LOW;Continue update command failed;linux\devices\ploc\PlocSupvHelper.h
+13603;0x3523;SUPV_CONTINUE_UPDATE_SUCCESSFUL;LOW;Continue update command successful;linux\devices\ploc\PlocSupvHelper.h
+13604;0x3524;TERMINATED_UPDATE_PROCEDURE;LOW;Terminated update procedure by command;linux\devices\ploc\PlocSupvHelper.h
+13605;0x3525;SUPV_EVENT_BUFFER_REQUEST_SUCCESSFUL;LOW;Requesting event buffer was successful;linux\devices\ploc\PlocSupvHelper.h
+13606;0x3526;SUPV_EVENT_BUFFER_REQUEST_FAILED;LOW;Requesting event buffer failed;linux\devices\ploc\PlocSupvHelper.h
+13607;0x3527;SUPV_EVENT_BUFFER_REQUEST_TERMINATED;LOW;Terminated event buffer request by command P1: Number of packets read before process was terminated;linux\devices\ploc\PlocSupvHelper.h
+13608;0x3528;SUPV_SENDING_COMMAND_FAILED;LOW;;linux\devices\ploc\PlocSupvHelper.h
+13609;0x3529;SUPV_HELPER_REQUESTING_REPLY_FAILED;LOW;Request receive message of communication interface failed P1: Return value returned by the communication interface requestReceiveMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13610;0x352a;SUPV_HELPER_READING_REPLY_FAILED;LOW;Reading receive message of communication interface failed P1: Return value returned by the communication interface readingReceivedMessage function P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13611;0x352b;SUPV_MISSING_ACK;LOW;Did not receive acknowledgement report P1: Number of bytes missing P2: Internal state of MPSoC helper;linux\devices\ploc\PlocSupvHelper.h
+13612;0x352c;SUPV_MISSING_EXE;LOW;Supervisor did not receive execution report P1: Number of bytes missing P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13613;0x352d;SUPV_ACK_FAILURE_REPORT;LOW;Supervisor received acknowledgment failure report P1: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13614;0x352e;SUPV_EXE_FAILURE_REPORT;LOW;Execution report failure P1:;linux\devices\ploc\PlocSupvHelper.h
+13615;0x352f;SUPV_ACK_INVALID_APID;LOW;Supervisor expected acknowledgment report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13616;0x3530;SUPV_EXE_INVALID_APID;LOW;Supervisor helper expected execution report but received space packet with other apid P1: Apid of received space packet P2: Internal state of supervisor helper;linux\devices\ploc\PlocSupvHelper.h
+13617;0x3531;ACK_RECEPTION_FAILURE;LOW;Failed to receive acknowledgment report P1: Return value P2: Apid of command for which the reception of the acknowledgment report failed;linux\devices\ploc\PlocSupvHelper.h
+13618;0x3532;EXE_RECEPTION_FAILURE;LOW;Failed to receive execution report P1: Return value P2: Apid of command for which the reception of the execution report failed;linux\devices\ploc\PlocSupvHelper.h
+13619;0x3533;WRITE_MEMORY_FAILED;LOW;Update procedure failed when sending packet with number P1 P1: Packet number for which the memory write command fails;linux\devices\ploc\PlocSupvHelper.h
+13700;0x3584;ALLOC_FAILURE;MEDIUM;;bsp_q7s\core\CoreController.h
+13701;0x3585;REBOOT_SW;MEDIUM; Software reboot occurred. Can also be a systemd reboot. P1: Current Chip, P2: Current Copy;bsp_q7s\core\CoreController.h
+13702;0x3586;REBOOT_MECHANISM_TRIGGERED;MEDIUM;The reboot mechanism was triggered. P1: First 16 bits: Last Chip, Last 16 bits: Last Copy, P2: Each byte is the respective reboot count for the slots;bsp_q7s\core\CoreController.h
+13703;0x3587;REBOOT_HW;MEDIUM;;bsp_q7s\core\CoreController.h
--- a/config/object_ids.py
+++ b/config/object_ids.py
@ -77,6 +77,24 @@ HEATER_5_STR = bytes([0x60, 0x00, 0x00, 0x05])
 HEATER_6_DRO = bytes([0x60, 0x00, 0x00, 0x06])
 HEATER_7_HPA = bytes([0x60, 0x00, 0x00, 0x07])

+# RTDs
+RTD_0_PLOC_HSPD = bytes([0x44, 0x42, 0x00, 0x16])
+RTD_1_PLOC_MISSIONBRD= bytes([0x44, 0x42, 0x00, 0x17])
+RTD_2_4K_CAM = bytes([0x44, 0x42, 0x00, 0x18])
+RTD_3_DAC_HSPD = bytes([0x44, 0x42, 0x00, 0x19])
+RTD_4_STR = bytes([0x44, 0x42, 0x00, 0x20])
+RTD_5_RW1_MX_MY = bytes([0x44, 0x42, 0x00, 0x21])
+RTD_6_DRO = bytes([0x44, 0x42, 0x00, 0x22])
+RTD_7_SCEX = bytes([0x44, 0x42, 0x00, 0x23])
+RTD_8_X8 = bytes([0x44, 0x42, 0x00, 0x24])
+RTD_9_HPA = bytes([0x44, 0x42, 0x00, 0x25])
+RTD_10_PL_TX = bytes([0x44, 0x42, 0x00, 0x26])
+RTD_11_MPA = bytes([0x44, 0x42, 0x00, 0x27])
+RTD_12_ACU = bytes([0x44, 0x42, 0x00, 0x28])
+RTD_13_PLPCDU_HSPD = bytes([0x44, 0x42, 0x00, 0x29])
+RTD_14_TCS_BRD = bytes([0x44, 0x42, 0x00, 0x30])
+RTD_15_IMTQ = bytes([0x44, 0x42, 0x00, 0x31])
+
 # System and Assembly Objects
 ACS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x01])
 SUS_BOARD_ASS_ID = bytes([0x73, 0x00, 0x00, 0x02])
--- a/config/objects.csv
+++ b/config/objects.csv
@ -37,6 +37,7 @@
 0x44260000;BPX_BATT_HANDLER
 0x44300000;PLPCDU_HANDLER
 0x443200A5;RAD_SENSOR
+0x44330000;PLOC_UPDATER
 0x44330001;PLOC_MEMORY_DUMPER
 0x44330002;STR_HELPER
 0x44330003;PLOC_MPSOC_HELPER
@ -70,6 +71,7 @@
 0x49010005;GPIO_IF
 0x49020004;SPI_MAIN_COM_IF
 0x49020005;SPI_RW_COM_IF
+0x49020006;SPI_RTD_COM_IF
 0x49030003;UART_COM_IF
 0x49040002;I2C_COM_IF
 0x49050001;CSP_COM_IF
@ -90,6 +92,7 @@
 0x53000005;PUS_SERVICE_5_EVENT_REPORTING
 0x53000008;PUS_SERVICE_8_FUNCTION_MGMT
 0x53000009;PUS_SERVICE_9_TIME_MGMT
+0x53000011;PUS_SERVICE_11_TC_SCHEDULER
 0x53000017;PUS_SERVICE_17_TEST
 0x53000020;PUS_SERVICE_20_PARAMETERS
 0x53000200;PUS_SERVICE_200_MODE_MGMT
--- a/config/returnvalues.csv
+++ b/config/returnvalues.csv
--- a/pus_tc/cmd_definitions.py
+++ b/pus_tc/cmd_definitions.py
@ -1,4 +1,5 @@
 from pus_tc.devs.gps import GpsOpCodes
+from pus_tc.devs.rad_sensor import add_rad_sens_cmds
 from tmtccmd.config import (
    add_op_code_entry,
    add_service_op_code_entry,
@ -8,6 +9,7 @@ from tmtccmd.config import (
 )
 from config.definitions import CustomServiceList
 from pus_tc.devs.heater import add_heater_cmds
+from pus_tc.devs.rtd import specify_rtd_cmds
 from pus_tc.devs.reaction_wheels import add_rw_cmds
 from pus_tc.devs.bpx_batt import BpxOpCodes

@ -20,6 +22,7 @@ def get_eive_service_op_code_dict() -> ServiceOpCodeDictT:
    add_core_controller_definitions(cmd_dict=service_op_code_dict)
    add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
    add_pcdu_cmds(cmd_dict=service_op_code_dict)
+    specify_rtd_cmds(cmd_dict=service_op_code_dict)
    add_imtq_cmds(cmd_dict=service_op_code_dict)
    add_rad_sens_cmds(cmd_dict=service_op_code_dict)
    add_rw_cmds(cmd_dict=service_op_code_dict)
@ -775,20 +778,6 @@ def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
    cmd_dict[CustomServiceList.IMTQ.value] = service_imtq_tuple


-def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
-    op_code_dict_srv_rad_sensor = {
-        "0": ("Radiation Sensor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "1": ("Radiation Sensor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "2": ("Radiation Sensor: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "3": ("Radiation Sensor: Start conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "4": ("Radiation Sensor: Read conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "5": ("Radiation Sensor: Enable debug output", {OpCodeDictKeys.TIMEOUT: 2.0}),
-        "6": ("Radiation Sensor: Disable debug putput", {OpCodeDictKeys.TIMEOUT: 2.0}),
-    }
-    service_rad_sensor_tuple = ("Radiation Sensor", op_code_dict_srv_rad_sensor)
-    cmd_dict[CustomServiceList.RAD_SENSOR.value] = service_rad_sensor_tuple
-
-
 def add_ploc_mpsoc_cmds(cmd_dict: ServiceOpCodeDictT):
    op_code_dict_srv_ploc_mpsoc = {
        "0": ("Ploc MPSoC: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
@ -904,43 +893,9 @@ def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
        "55": ("PLOC Supervisor: Request ADC Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "56": ("PLOC Supervisor: Reset PL", {OpCodeDictKeys.TIMEOUT: 2.0}),
        "57": ("PLOC Supervisor: Enable NVMs", {OpCodeDictKeys.TIMEOUT: 2.0}),
+        "58": ("PLOC Supervisor: Continue update", {OpCodeDictKeys.TIMEOUT: 2.0}),
    }
    service_ploc_supv_tuple = ("PLOC Supervisor", op_code_dict_srv_ploc_supv)
-
-    op_code_dict_srv_ploc_updater = {
-        "0": (
-            "Ploc Updater: Update uboot on partition A",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "1": (
-            "Ploc Updater: Update bitstream on partition A",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "2": (
-            "Ploc Updater: Update linux on partition A",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "3": (
-            "Ploc Updater: Update application on partition A",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "4": (
-            "Ploc Updater: Update uboot on partition B",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "5": (
-            "Ploc Updater: Update bitstream on partition B",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "6": (
-            "Ploc Updater: Update linux on partition B",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-        "7": (
-            "Ploc Updater: Update application on partition B",
-            {OpCodeDictKeys.TIMEOUT: 2.0},
-        ),
-    }
    cmd_dict[CustomServiceList.PLOC_SUPV.value] = service_ploc_supv_tuple
    cmd_dict[
        CustomServiceList.PLOC_MEMORY_DUMPER.value
--- a/pus_tc/devs/ploc_supervisor.py
+++ b/pus_tc/devs/ploc_supervisor.py
@ -98,6 +98,7 @@ class SupvActionIds:
    REQUEST_ADC_REPORT = 57
    RESET_PL = 58
    ENABLE_NVMS = 59
+    CONTINUE_UPDATE = 60


 class SupvHkIds:
@ -397,6 +398,11 @@ def pack_ploc_supv_commands(
        )
        command = PusTelecommand(service=8, subservice=128, ssc=72, app_data=command)
        tc_queue.appendleft(command.pack_command_tuple())
+    elif op_code == "58":
+        tc_queue.appendleft((QueueCommands.PRINT, "PLOC Supervisor: Continue update"))
+        command = object_id + struct.pack("!I", SupvActionIds.CONTINUE_UPDATE)
+        command = PusTelecommand(service=8, subservice=128, ssc=73, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())

    return tc_queue

--- a/pus_tc/devs/rad_sensor.py
+++ b/pus_tc/devs/rad_sensor.py
@ -7,11 +7,37 @@
 """
 import struct

-from tmtccmd.config.definitions import QueueCommands
+from config.definitions import CustomServiceList
+from tmtccmd.config import add_op_code_entry, add_service_op_code_entry
+from tmtccmd.config.definitions import QueueCommands, ServiceOpCodeDictT, OpCodeDictKeys

 from tmtccmd.tc.packer import TcQueueT
 from spacepackets.ecss.tc import PusTelecommand
 from pus_tc.service_200_mode import pack_mode_data, Modes
+from tmtccmd.tc.pus_3_fsfw_hk import generate_one_hk_command, make_sid
+from tmtccmd.utility import ObjectId
+
+
+class SetIds:
+    HK = 3
+
+
+class OpCodes:
+    ON = ["0", "on"]
+    NORMAL = ["1", "normal"]
+    OFF = ["2", "off"]
+    REQ_HK_ONCE = ["3", "hk-os"]
+    DEBUG_ON = ["10", "dbg-on"]
+    DEBUG_OFF = ["11", "dbg-off"]
+
+
+class Info:
+    ON = "Switch Rad Sensor on"
+    NORMAL = "Switch Rad Sensor normal"
+    OFF = "Switch Rad sensor off"
+    REQ_OS_HK = "Request one-shot HK"
+    DEBUG_ON = "Switch debug output on"
+    DEBUG_OFF = "Switch debug output off"


 class CommandIds:
@ -21,52 +47,64 @@ class CommandIds:
    DISABLE_DEBUG_OUTPUT = 5


-def pack_rad_sensor_test_into(object_id: bytearray, tc_queue: TcQueueT, op_code: str):
-    tc_queue.appendleft(
-        (
-            QueueCommands.PRINT,
-            "Testing radiation sensor handler with object id: 0x" + object_id.hex(),
+def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
+
+    op_code_dict = dict()
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.ON, keys=OpCodes.ON)
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.OFF, keys=OpCodes.OFF)
+    add_op_code_entry(op_code_dict=op_code_dict, info=Info.NORMAL, keys=OpCodes.NORMAL)
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.REQ_OS_HK, keys=OpCodes.REQ_HK_ONCE
    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.DEBUG_ON, keys=OpCodes.DEBUG_ON
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict, info=Info.DEBUG_OFF, keys=OpCodes.DEBUG_OFF
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        name=CustomServiceList.RAD_SENSOR.value,
+        info="Radiation Sensor",
+        op_code_entry=op_code_dict,
    )

-    if op_code == "0":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode on"))
-        mode_data = pack_mode_data(object_id, Modes.ON, 0)
+
+def pack_rad_sensor_test_into(object_id: ObjectId, tc_queue: TcQueueT, op_code: str):
+    tc_queue.appendleft(
+        (QueueCommands.PRINT, f"Commanding Radiation sensor handler {object_id}")
+    )
+
+    if op_code in OpCodes.ON:
+        rad_sensor_mode_cmd(object_id, Modes.ON, Info.ON, tc_queue)
+    if op_code in OpCodes.NORMAL:
+        rad_sensor_mode_cmd(object_id, Modes.NORMAL, Info.NORMAL, tc_queue)
+    if op_code in OpCodes.OFF:
+        rad_sensor_mode_cmd(object_id, Modes.OFF, Info.OFF, tc_queue)
+    if op_code in OpCodes.REQ_HK_ONCE:
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.REQ_OS_HK}"))
+        cmd = generate_one_hk_command(
+            sid=make_sid(object_id.as_bytes, set_id=SetIds.HK), ssc=0
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodes.DEBUG_ON:
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_ON}"))
+        command = object_id.as_bytes + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
+        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())
+    if op_code in OpCodes.DEBUG_OFF:
+        tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {Info.DEBUG_OFF}"))
+        command = object_id.as_bytes + struct.pack(
+            "!I", CommandIds.DISABLE_DEBUG_OUTPUT
+        )
+        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
+        tc_queue.appendleft(command.pack_command_tuple())
+
+
+def rad_sensor_mode_cmd(
+    object_id: ObjectId, mode: Modes, info: str, tc_queue: TcQueueT
+):
+    tc_queue.appendleft((QueueCommands.PRINT, f"Rad sensor: {info}"))
+    mode_data = pack_mode_data(object_id.as_bytes, mode, 0)
    command = PusTelecommand(service=200, subservice=1, ssc=41, app_data=mode_data)
    tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "1":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode normal"))
-        mode_data = pack_mode_data(object_id, Modes.NORMAL, 0)
-        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "2":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Switch to mode off"))
-        mode_data = pack_mode_data(object_id, Modes.OFF, 0)
-        command = PusTelecommand(service=200, subservice=1, ssc=42, app_data=mode_data)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "3":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Start  conversions"))
-        command = object_id + struct.pack("!I", CommandIds.START_CONVERSIONS)
-        command = PusTelecommand(service=8, subservice=128, ssc=43, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "4":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Read  conversions"))
-        command = object_id + struct.pack("!I", CommandIds.READ_CONVERSIONS)
-        command = PusTelecommand(service=8, subservice=128, ssc=44, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "5":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Enable debug output"))
-        command = object_id + struct.pack("!I", CommandIds.ENABLE_DEBUG_OUTPUT)
-        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
-
-    if op_code == "6":
-        tc_queue.appendleft((QueueCommands.PRINT, "Rad sensor: Disable debug output"))
-        command = object_id + struct.pack("!I", CommandIds.DISABLE_DEBUG_OUTPUT)
-        command = PusTelecommand(service=8, subservice=128, ssc=45, app_data=command)
-        tc_queue.appendleft(command.pack_command_tuple())
--- a/pus_tc/devs/rtd.py
+++ b/pus_tc/devs/rtd.py
@ -0,0 +1,113 @@
+from typing import Optional
+
+from config.definitions import CustomServiceList
+from spacepackets.ecss import PusTelecommand
+from tmtccmd.config import ServiceOpCodeDictT, add_op_code_entry, add_service_op_code_entry
+from tmtccmd.tc.definitions import TcQueueT
+from tmtccmd.utility import ObjectId
+from tmtccmd.tc.pus_200_fsfw_modes import Modes, pack_mode_data, Subservices
+import config.object_ids as oids
+from config.object_ids import get_object_ids
+
+RTD_IDS = [
+    oids.RTD_0_PLOC_HSPD,
+    oids.RTD_1_PLOC_MISSIONBRD,
+    oids.RTD_2_4K_CAM,
+    oids.RTD_3_DAC_HSPD,
+    oids.RTD_4_STR,
+    oids.RTD_5_RW1_MX_MY,
+    oids.RTD_6_DRO,
+    oids.RTD_7_SCEX,
+    oids.RTD_8_X8,
+    oids.RTD_9_HPA,
+    oids.RTD_10_PL_TX,
+    oids.RTD_11_MPA,
+    oids.RTD_12_ACU,
+    oids.RTD_13_PLPCDU_HSPD,
+    oids.RTD_14_TCS_BRD,
+    oids.RTD_15_IMTQ
+]
+
+
+class OpCodes:
+    ON = ["0", "on"]
+    OFF = ["1", "off"]
+    NORMAL = ["2", "normal"]
+
+
+class Info:
+    ON = "Switch handler on"
+    OFF = "Switch handler off"
+    NORMAL = "Switch handler normal"
+
+
+def specify_rtd_cmds(cmd_dict: ServiceOpCodeDictT):
+    op_code_dict = dict()
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.ON,
+        info=Info.ON
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.NORMAL,
+        info=Info.NORMAL
+    )
+    add_op_code_entry(
+        op_code_dict=op_code_dict,
+        keys=OpCodes.OFF,
+        info=Info.OFF
+    )
+    add_service_op_code_entry(
+        srv_op_code_dict=cmd_dict,
+        op_code_entry=op_code_dict,
+        name=CustomServiceList.RTD.value,
+        info="RTD commands"
+    )
+
+
+def pack_rtd_commands(op_code: str, object_id: Optional[ObjectId], tc_queue: TcQueueT):
+    if object_id is not None and object_id not in RTD_IDS:
+        print("Specified object ID not a valid RTD ID")
+        object_id = None
+    if object_id is None:
+        tgt_rtd_idx = prompt_rtd_idx()
+        object_id_dict = get_object_ids()
+        object_id = object_id_dict.get(RTD_IDS[tgt_rtd_idx])
+    if op_code in OpCodes.ON:
+        app_data = pack_mode_data(object_id=object_id.as_bytes, mode=Modes.ON, submode=0)
+        cmd = PusTelecommand(
+            service=200,
+            subservice=Subservices.TC_MODE_COMMAND,
+            app_data=app_data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodes.NORMAL:
+        app_data = pack_mode_data(object_id=object_id.as_bytes, mode=Modes.NORMAL, submode=0)
+        cmd = PusTelecommand(
+            service=200,
+            subservice=Subservices.TC_MODE_COMMAND,
+            app_data=app_data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+    if op_code in OpCodes.OFF:
+        app_data = pack_mode_data(object_id=object_id.as_bytes, mode=Modes.OFF, submode=0)
+        cmd = PusTelecommand(
+            service=200,
+            subservice=Subservices.TC_MODE_COMMAND,
+            app_data=app_data
+        )
+        tc_queue.appendleft(cmd.pack_command_tuple())
+
+
+def prompt_rtd_idx():
+    while True:
+        rtd_idx = input("Please specify RTD index [0-15]: ")
+        if not rtd_idx.isdigit():
+            print("Invalid input")
+            continue
+        rtd_idx = int(rtd_idx)
+        if rtd_idx < 0 or rtd_idx > 15:
+            print("Invalid device index")
+            continue
+        return rtd_idx
--- a/pus_tc/prompt_parameters.py
+++ b/pus_tc/prompt_parameters.py
@ -1,5 +1,11 @@
 from PyQt5.QtWidgets import (
-    QDialog, QDialogButtonBox, QVBoxLayout, QLabel, QGroupBox, QGridLayout, QLineEdit
+    QDialog,
+    QDialogButtonBox,
+    QVBoxLayout,
+    QLabel,
+    QGroupBox,
+    QGridLayout,
+    QLineEdit,
 )

 from PyQt5 import QtCore
@ -22,6 +28,7 @@ class Parameter:
        self.widget.setPlaceholderText(self.defaultValue)
        self.widget.setText("")

+
 class ParameterDialog(QDialog):
    def __init__(self):
        super().__init__()
@ -59,7 +66,6 @@ class ParameterDialog(QDialog):

        self.parameters[name] = parameter

-
    def _reset(self):
        for value in self.parameters.values():
            value.reset()
@ -80,14 +86,13 @@ class ParameterDialog(QDialog):
        super().reject()


-
-
-
 """Prompt the user to specify additional Parameters

    :param parameterList:   array of dictionaries with name and defaultValue attributes
    :return:                dict with all names as key and user supplied input as value string
    """
+
+
 def prompt_parameters(parameterList):
    gui = get_global(CoreGlobalIds.GUI)
    mode = get_global(CoreGlobalIds.MODE)
@ -98,6 +103,7 @@ def prompt_parameters(parameterList):
    else:
        return _cli_prompt(parameterList)

+
 def _gui_prompt(parameterList):
    dialog = ParameterDialog()
    for parameter in parameterList:
@ -105,10 +111,13 @@ def _gui_prompt(parameterList):
    dialog.exec_()
    return dialog.getParameters()

+
 def _cli_prompt(parameterList):
    result = {}
    for parameter in parameterList:
-        userInput = input("Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"]))
+        userInput = input(
+            "Specify {} [{}]: ".format(parameter["name"], parameter["defaultValue"])
+        )
        if userInput == "":
            userInput = parameter["defaultValue"]
        result[parameter["name"]] = userInput
--- a/pus_tc/system/controllers.py
+++ b/pus_tc/system/controllers.py
@ -18,8 +18,12 @@ class Info:


 def pack_controller_commands(tc_queue: TcQueueT, op_code: str):
-    parameters = prompt_parameters([{"name": "Mode", "defaultValue": "2"}, {
-                                   "name": "Submode", "defaultValue": "0"}])
+    parameters = prompt_parameters(
+        [
+            {"name": "Mode", "defaultValue": "2"},
+            {"name": "Submode", "defaultValue": "0"},
+        ]
+    )
    mode = int(parameters["Mode"])
    if mode < 0 or mode > 2:
        print("Invalid Mode, defaulting to OFF")
--- a/pus_tc/tc_packer_hook.py
+++ b/pus_tc/tc_packer_hook.py
@ -5,6 +5,7 @@ import os
 from collections import deque
 from typing import Union

+from pus_tc.devs.rtd import pack_rtd_commands
 from spacepackets.ecss import PusTelecommand
 from tmtccmd.com_if.com_interface_base import CommunicationInterface
 from tmtccmd.config.definitions import CoreServiceList, QueueCommands
@ -69,6 +70,7 @@ from config.object_ids import (
    SYRLINKS_HANDLER_ID,
    SOLAR_ARRAY_DEPLOYMENT_ID,
    RW_ASSEMBLY,
+    get_object_ids,
 )


@ -98,6 +100,7 @@ def pre_tc_send_cb(
 def pack_service_queue_user(
    service: Union[str, int], op_code: str, service_queue: TcQueueT
 ):
+    obj_id_man = get_object_ids()
    if service == CoreServiceList.SERVICE_5.value:
        return pack_generic_service5_test_into(tc_queue=service_queue)
    if service == CoreServiceList.SERVICE_17.value:
@ -111,6 +114,8 @@ def pack_service_queue_user(
        return pack_p60dock_cmds(
            object_id=object_id, tc_queue=service_queue, op_code=op_code
        )
+    if service == CustomServiceList.RTD.value:
+        return pack_rtd_commands(object_id=None, tc_queue=service_queue, op_code=op_code)
    if service == CustomServiceList.PDU1.value:
        object_id = PDU_1_HANDLER_ID
        return pack_pdu1_commands(
@ -170,7 +175,7 @@ def pack_service_queue_user(
            object_id=RW4_ID, rw_idx=4, tc_queue=service_queue, op_code=op_code
        )
    if service == CustomServiceList.RAD_SENSOR.value:
-        object_id = RAD_SENSOR_ID
+        object_id = obj_id_man.get(RAD_SENSOR_ID)
        return pack_rad_sensor_test_into(
            object_id=object_id, tc_queue=service_queue, op_code=op_code
        )
--- a/pus_tm/devs/rad_sensor.py
+++ b/pus_tm/devs/rad_sensor.py
@ -0,0 +1,24 @@
+import struct
+
+from pus_tm.defs import PrintWrapper
+from tmtccmd.utility.tmtc_printer import FsfwTmTcPrinter
+from pus_tc.devs.rad_sensor import SetIds
+
+
+def handle_rad_sensor_data(printer: FsfwTmTcPrinter, set_id: int, hk_data: bytes):
+    if set_id == SetIds.HK:
+        pw = PrintWrapper(printer)
+        current_idx = 0
+        pw.dlog("Received Radiation Sensor HK data")
+        fmt_str = "!fHHHHHH"
+        inc_len = struct.calcsize(fmt_str)
+        (temp, ain0, ain1, ain4, ain5, ain6, ain7) = struct.unpack(
+            fmt_str, hk_data[current_idx : current_idx + inc_len]
+        )
+        ain_dict = {0: ain0, 1: ain1, 4: ain4, 5: ain5, 6: ain6, 7: ain7}
+        pw.dlog(f"Temperature: {temp} C")
+        pw.dlog(f"AIN Channel | Raw Value (hex) | Raw Value (dec)")
+        for idx, val in ain_dict.items():
+            pw.dlog(f"{idx} | {val:#06x} | {str(val).ljust(5)}")
+        current_idx += inc_len
+        printer.print_validity_buffer(validity_buffer=hk_data[current_idx:], num_vars=7)
--- a/pus_tm/hk_handling.py
+++ b/pus_tm/hk_handling.py
@ -1,6 +1,7 @@
 """HK Handling for EIVE OBSW"""
 import struct

+from pus_tm.devs.rad_sensor import handle_rad_sensor_data
 from pus_tm.system.tcs import handle_thermal_controller_hk_data, TM_TCP_SERVER
 from tmtccmd.config.definitions import HkReplyUnpacked
 from tmtccmd.tm.pus_3_fsfw_hk import (
@ -92,6 +93,8 @@ def handle_regular_hk_print(
        return handle_pdu_data(
            printer=printer, pdu_idx=2, set_id=set_id, hk_data=hk_data
        )
+    if objb == obj_ids.RAD_SENSOR_ID:
+        return handle_rad_sensor_data(printer=printer, hk_data=hk_data, set_id=set_id)
    if objb in [obj_ids.RW1_ID, obj_ids.RW2_ID, obj_ids.RW3_ID, obj_ids.RW4_ID]:
        return handle_rw_hk_data(
            printer=printer, object_id=object_id, set_id=set_id, hk_data=hk_data
--- a/tmtcgui.py
+++ b/tmtcgui.py
@ -7,6 +7,7 @@ from tmtccmd.config.args import (
    parse_gui_input_arguments,
 )

+
 def main():
    hook_obj = tmtcc_pre_args()
    arg_parser = create_default_args_parser()