eive-tmtc/pus_tc/cmd_definitions.py

1070 lines
39 KiB
Python

from pus_tc.devs.gps import GpsOpCodes
from tmtccmd.config import (
add_op_code_entry,
add_service_op_code_entry,
generate_op_code_options,
ServiceOpCodeDictT,
OpCodeDictKeys,
)
from config.definitions import CustomServiceList
from pus_tc.devs.heater import add_heater_cmds
from pus_tc.devs.bpx_batt import BpxOpCodes
def get_eive_service_op_code_dict(service_op_code_dict: ServiceOpCodeDictT):
add_bpx_cmd_definitions(cmd_dict=service_op_code_dict)
add_core_controller_definitions(cmd_dict=service_op_code_dict)
add_pl_pcdu_cmds(cmd_dict=service_op_code_dict)
add_pcdu_cmds(cmd_dict=service_op_code_dict)
add_imtq_cmds(cmd_dict=service_op_code_dict)
add_rad_sens_cmds(cmd_dict=service_op_code_dict)
add_rw_cmds(cmd_dict=service_op_code_dict)
add_ploc_mpsoc_cmds(cmd_dict=service_op_code_dict)
add_ploc_supv_cmds(cmd_dict=service_op_code_dict)
add_system_cmds(cmd_dict=service_op_code_dict)
add_time_cmds(cmd_dict=service_op_code_dict)
add_syrlinks_cmds(cmd_dict=service_op_code_dict)
add_gps_cmds(cmd_dict=service_op_code_dict)
add_str_cmds(cmd_dict=service_op_code_dict)
add_ccsds_cmds(cmd_dict=service_op_code_dict)
add_pdec_cmds(cmd_dict=service_op_code_dict)
add_heater_cmds(cmd_dict=service_op_code_dict)
add_tmp_sens_cmds(cmd_dict=service_op_code_dict)
def add_tmp_sens_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict = {
"0": ("TMP1075 Tests", {OpCodeDictKeys.TIMEOUT: 2.2}),
}
service_tuple = ("TMP1075 1", op_code_dict)
cmd_dict[CustomServiceList.TMP1075_1.value] = service_tuple
service_tuple = ("TMP1075 2", op_code_dict)
cmd_dict[CustomServiceList.TMP1075_2.value] = service_tuple
def add_pdec_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_pdec_handler = {
"0": ("PDEC Handler: Print CLCW", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("PDEC Handler: Print PDEC monitor", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_pdec_handler_tuple = ("PDEC Handler", op_code_dict_srv_pdec_handler)
cmd_dict[CustomServiceList.PDEC_HANDLER.value] = service_pdec_handler_tuple
def add_ccsds_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_ccsds_handler = {
"0": ("CCSDS Handler: Set low rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("CCSDS Handler: Set high rate", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("CCSDS Handler: Enable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("CCSDS Handler: Disable transmitter", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("CCSDS Handler: Set arbitrary bitrate", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": (
"CCSDS Handler: Enable tx clock manipulator",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"6": (
"CCSDS Handler: Disable tx clock manipulator",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"7": (
"CCSDS Handler: Update tx data on rising edge",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"8": (
"CCSDS Handler: Update tx data on falling edge",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
}
service_ccsds_handler_tuple = ("CCSDS Handler", op_code_dict_srv_ccsds_handler)
cmd_dict[CustomServiceList.CCSDS_HANDLER.value] = service_ccsds_handler_tuple
def add_gps_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict = {
GpsOpCodes.RESET_GNSS.value: ("Reset GPS", {OpCodeDictKeys.TIMEOUT: 2.0})
}
service_tuple = ("GPS 0", op_code_dict)
cmd_dict[CustomServiceList.GPS_0.value] = service_tuple
cmd_dict[CustomServiceList.GPS_1.value] = service_tuple
def add_str_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_star_tracker = {
"0": (
"Star Tracker: Mode On, Submode Bootloader",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"1": ("Star Tracker: Mode On, Submode Firmware", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Star Tracker: Mode Normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Star Tracker: Mode Off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Star Tracker: Mode Raw", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("Star Tracker: Ping", {OpCodeDictKeys.TIMEOUT: 5.0}),
"6": (
"Star Tracker: Switch to bootloader program",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"7": ("Star Tracker: Request temperature", {OpCodeDictKeys.TIMEOUT: 2.0}),
"8": ("Star Tracker: Request version", {OpCodeDictKeys.TIMEOUT: 2.0}),
"9": ("Star Tracker: Request interface", {OpCodeDictKeys.TIMEOUT: 2.0}),
"10": ("Star Tracker: Request power", {OpCodeDictKeys.TIMEOUT: 2.0}),
"11": (
"Star Tracker: Set subscription parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"12": (
"Star Tracker: Boot image (requires bootloader mode)",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"13": ("Star Tracker: Request time", {OpCodeDictKeys.TIMEOUT: 2.0}),
"14": ("Star Tracker: Request solution", {OpCodeDictKeys.TIMEOUT: 2.0}),
"15": ("Star Tracker: Upload image", {OpCodeDictKeys.TIMEOUT: 2.0}),
"16": ("Star Tracker: Download image", {OpCodeDictKeys.TIMEOUT: 2.0}),
"17": ("Star Tracker: Set limit parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"18": ("Star Tracker: Set tracking parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"19": ("Star Tracker: Set mounting parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"20": ("Star Tracker: Set camera parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"22": (
"Star Tracker: Set centroiding parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"23": ("Star Tracker: Set LISA parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"24": ("Star Tracker: Set matching parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"25": (
"Star Tracker: Set validation parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"26": ("Star Tracker: Set algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"27": ("Star Tracker: Take image", {OpCodeDictKeys.TIMEOUT: 2.0}),
"28": ("Star Tracker: Stop str helper", {OpCodeDictKeys.TIMEOUT: 2.0}),
"30": (
"Star Tracker: Set name of download image",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"31": ("Star Tracker: Request histogram", {OpCodeDictKeys.TIMEOUT: 2.0}),
"32": ("Star Tracker: Request contrast", {OpCodeDictKeys.TIMEOUT: 2.0}),
"33": ("Star Tracker: Set json filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
"35": ("Star Tracker: Flash read", {OpCodeDictKeys.TIMEOUT: 2.0}),
"36": ("Star Tracker: Set flash read filename", {OpCodeDictKeys.TIMEOUT: 2.0}),
"37": ("Star Tracker: Get checksum", {OpCodeDictKeys.TIMEOUT: 2.0}),
"49": ("Star Tracker: Request camera parameter", {OpCodeDictKeys.TIMEOUT: 2.0}),
"50": ("Star Tracker: Request limits", {OpCodeDictKeys.TIMEOUT: 2.0}),
"51": (
"Star Tracker: Set image processor parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"52": (
"Star Tracker: (EGSE only) Load camera ground config ",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"53": (
"Star Tracker: (EGSE only) Load camera flight config",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"54": (
"Star Tracker: Request log level parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"55": (
"Star Tracker: Request mounting parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"56": (
"Star Tracker: Request image processor parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"57": (
"Star Tracker: Request centroiding parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"58": ("Star Tracker: Request lisa parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"59": (
"Star Tracker: Request matching parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"60": (
"Star Tracker: Request tracking parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"61": (
"Star Tracker: Request validation parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"62": ("Star Tracker: Request algo parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"63": (
"Star Tracker: Request subscription parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"64": (
"Star Tracker: Request log subscription parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"65": (
"Star Tracker: Request debug camera parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"66": ("Star Tracker: Set log level parameters", {OpCodeDictKeys.TIMEOUT: 2.0}),
"67": (
"Star Tracker: Set log subscription parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"68": (
"Star Tracker: Set debug camera parameters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"69": ("Star Tracker: Firmware update", {OpCodeDictKeys.TIMEOUT: 2.0}),
"70": (
"Star Tracker: Disable timestamp generation",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"71": (
"Star Tracker: Enable timestamp generation",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
}
service_star_tracker_tuple = ("Star tracker", op_code_dict_srv_star_tracker)
cmd_dict[CustomServiceList.STAR_TRACKER.value] = service_star_tracker_tuple
def add_syrlinks_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_syrlinks_handler = {
"0": ("Syrlinks Handler: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("Syrlinks Handler: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Syrlinks Handler: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Syrlinks Handler: Set TX standby", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Syrlinks Handler: Set TX modulation", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("Syrlinks Handler: Set TX carrier wave", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("Syrlinks Handler: Read TX status", {OpCodeDictKeys.TIMEOUT: 2.0}),
"7": ("Syrlinks Handler: Read TX waveform", {OpCodeDictKeys.TIMEOUT: 2.0}),
"8": (
"Syrlinks Handler: Read TX AGC value high byte ",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"9": (
"Syrlinks Handler: Read TX AGC value low byte ",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"12": (
"Syrlinks Handler: Write LCL config",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"13": (
"Syrlinks Handler: Read RX status registers",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"14": (
"Syrlinks Handler: Read LCL config register",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"15": (
"Syrlinks Handler: Set waveform OQPSK",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"16": (
"Syrlinks Handler: Set waveform BPSK",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"17": (
"Syrlinks Handler: Set second config",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"18": (
"Syrlinks Handler: Enable debug output",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"19": (
"Syrlinks Handler: Disable debug output",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
}
service_syrlinks_handler_tuple = (
"Syrlinks Handler",
op_code_dict_srv_syrlinks_handler,
)
cmd_dict[CustomServiceList.SYRLINKS.value] = service_syrlinks_handler_tuple
def add_bpx_cmd_definitions(cmd_dict: ServiceOpCodeDictT):
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict, keys=BpxOpCodes.HK, info="Request BPX HK"
)
add_op_code_entry(
op_code_dict=op_code_dict, keys=BpxOpCodes.RST_BOOT_CNT, info="Reset Boot Count"
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=BpxOpCodes.REQUEST_CFG,
info="Request Configuration Struct (Step 1)",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=BpxOpCodes.REQUEST_CFG_HK,
info="Request Configuration Struct HK (Step 2)",
)
add_op_code_entry(
op_code_dict=op_code_dict, keys=BpxOpCodes.REBOOT, info="Reboot Command"
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.BPX_BATTERY.value,
info="BPX Battery Handler",
op_code_entry=op_code_dict,
)
def add_core_controller_definitions(cmd_dict: ServiceOpCodeDictT):
from pus_tc.system.core import OpCodes
od = dict()
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT, info="Reboot with Prompt")
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT_SELF, info="Reboot Self")
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT_0_0, info="Reboot 0 0")
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT_0_1, info="Reboot 0 1")
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT_1_0, info="Reboot 1 0")
add_op_code_entry(op_code_dict=od, keys=OpCodes.REBOOT_1_1, info="Reboot 1 1")
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.ENABLE_REBOOT_FILE_HANDLING,
info="Enable reboot file handling",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.DISABLE_REBOOT_FILE_HANDLING,
info="Disable reboot file handling",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.RESET_ALL_REBOOT_COUNTERS,
info="Reset all reboot counters",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.RESET_REBOOT_COUNTER_00,
info="Reset reboot counter 0 0",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.RESET_REBOOT_COUNTER_01,
info="Reset reboot counter 0 1",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.RESET_REBOOT_COUNTER_10,
info="Reset reboot counter 1 0",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.RESET_REBOOT_COUNTER_11,
info="Reset reboot counter 1 1",
)
add_op_code_entry(
op_code_dict=od,
keys=OpCodes.GET_HK,
info="Request housekeeping set",
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.CORE.value,
info="Reboot Self",
op_code_entry=od,
)
def add_pl_pcdu_cmds(cmd_dict: ServiceOpCodeDictT):
from pus_tc.devs.plpcdu import OpCodes, Info
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict, keys=OpCodes.SWITCH_ON, info=Info.SWITCH_ON
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_SSR,
info=Info.NORMAL_SSR,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_DRO,
info=Info.NORMAL_DRO,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_X8,
info=Info.NORMAL_X8,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_TX,
info=Info.NORMAL_TX,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_MPA,
info=Info.NORMAL_MPA,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.NORMAL_HPA,
info=Info.NORMAL_HPA,
)
add_op_code_entry(
op_code_dict=op_code_dict, keys=OpCodes.SWITCH_OFF, info=Info.SWITCH_OFF
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.UPDATE_DRO_TO_X8_WAIT,
info="Update DRO to X8 wait time",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_SSR_TO_DRO_FAILURE,
info="Inject failure SSR to DRO transition",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_DRO_TO_X8_FAILURE,
info="Inject failure in DRO to X8 transition",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_X8_TO_TX_FAILURE,
info="Inject failure in X8 to TX transition",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_TX_TO_MPA_FAILURE,
info="Inject failure in TX to MPA transition",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_MPA_TO_HPA_FAILURE,
info="Inject failure in MPA to HPA transition",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.INJECT_ALL_ON_FAILURE,
info="Inject failure in all on mode",
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.PL_PCDU.value,
info="PL PCDU",
op_code_entry=op_code_dict,
)
def add_time_cmds(cmd_dict: ServiceOpCodeDictT):
from pus_tc.system.time import OpCodes, Info
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=OpCodes.SET_CURRENT_TIME,
info=Info.SET_CURRENT_TIME,
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.TIME.value,
info="Time Service",
op_code_entry=op_code_dict,
)
def add_pcdu_cmds(cmd_dict: ServiceOpCodeDictT):
from pus_tc.devs.p60dock import P60OpCodes, GomspaceOpCodes, Info
from pus_tc.devs.pdu1 import Pdu1OpCodes
from pus_tc.devs.pdu2 import Pdu2OpCodes
from gomspace.gomspace_common import Info as GsInfo
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=P60OpCodes.STACK_3V3_ON,
info=Info.STACK_3V3_ON,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=P60OpCodes.STACK_3V3_OFF,
info=Info.STACK_3V3_OFF,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=P60OpCodes.STACK_5V_ON,
info=Info.STACK_5V_ON,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=P60OpCodes.STACK_5V_OFF,
info=Info.STACK_5V_OFF,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_CORE_HK_ONCE,
info=GsInfo.REQUEST_CORE_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_AUX_HK_ONCE,
info=GsInfo.REQUEST_AUX_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_SWITCH_V_I,
info="P60 Dock: Print Switches, Voltages, Currents",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_LATCHUPS,
info="P60 Dock: Print Latchups",
)
add_op_code_entry(op_code_dict=op_code_dict, keys=P60OpCodes.TEST, info="P60 Tests")
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.P60DOCK.value,
info="P60 Device",
op_code_entry=op_code_dict,
)
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.TCS_BOARD_ON.value,
info="PDU1: Turn TCS board on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.TCS_BOARD_OFF.value,
info="PDU1: Turn TCS board off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.STAR_TRACKER_ON.value,
info="PDU1: Turn star tracker on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.STAR_TRACKER_OFF.value,
info="PDU1: Turn star tracker off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SUS_NOMINAL_ON.value,
info="PDU1: Turn SUS nominal on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SUS_NOMINAL_OFF.value,
info="PDU1: Turn SUS nominal off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.ACS_A_SIDE_ON.value,
info="PDU1: Turn ACS A side on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.ACS_A_SIDE_OFF.value,
info="PDU1: Turn ACS A side off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SYRLINKS_ON.value,
info="PDU1: Turn Syrlinks on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SYRLINKS_OFF.value,
info="PDU1: Turn Syrlinks off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.MGT_ON.value,
info="PDU1: Turn MGT on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.MGT_OFF.value,
info="PDU1: Turn MGT off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.PLOC_ON.value,
info="PDU1: Turn PLOC on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.PLOC_OFF.value,
info="PDU1: Turn PLOC off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SCEX_ON.value,
info="PDU1: Turn Solar Cell Experiment on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu1OpCodes.SCEX_OFF.value,
info="PDU1: Turn Solar Cell Experiment off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_CORE_HK_ONCE,
info=GsInfo.REQUEST_CORE_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_AUX_HK_ONCE,
info=GsInfo.REQUEST_AUX_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_SWITCH_V_I,
info="PDU1: Print Switches, Voltages, Currents",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_LATCHUPS,
info="PDU1: Print Latchups",
)
add_op_code_entry(
op_code_dict=op_code_dict, keys=Pdu1OpCodes.TESTS.value, info="PDU1 Tests"
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.PDU1.value,
info="PDU1 Device",
op_code_entry=op_code_dict,
)
op_code_dict = dict()
add_op_code_entry(op_code_dict=op_code_dict, keys="0", info="PDU2 Tests")
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.ACS_SIDE_B_ON.value,
info="PDU2: Turn ACS Side B on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.ACS_SIDE_B_OFF.value,
info="PDU2: Turn ACS Side B off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.SUS_REDUNDANT_ON.value,
info="PDU2: Turn SUS redundant on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.SUS_REDUNDANT_OFF.value,
info="PDU2: Turn SUS redundant off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.RW_ON.value,
info="PDU2: Turn reaction wheels on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.RW_OFF.value,
info="PDU2: Turn reaction wheels off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_PCDU_VBAT_NOM_ON.value,
info="PDU2: PL PCDU Switch Channel Nominal (1) on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_PCDU_VBAT_NOM_OFF.value,
info="PDU2: PL PCDU Switch Channel Nominal (1) off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_PCDU_VBAT_RED_ON.value,
info="PDU2: PL PCDU Switch Channel Redundant (1) on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_PCDU_VBAT_RED_OFF.value,
info="PDU2: PL PCDU Switch Channel Redundant (1) off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.TCS_HEATER_IN_ON.value,
info="PDU2: Switch TCS Heater Input on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.TCS_HEATER_IN_OFF.value,
info="PDU2: Switch TCS Heater Input off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.SOLAR_ARRAY_DEPL_ON.value,
info="PDU2: Switch Solar Array Deployment On",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.SOLAR_ARRAY_DEPL_OFF.value,
info="PDU2: Switch Solar Array Deployment Off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_CAMERA_ON.value,
info="PDU2: Turn payload camera on",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=Pdu2OpCodes.PL_CAMERA_OFF.value,
info="PDU2: Turn payload camera off",
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_CORE_HK_ONCE,
info=GsInfo.REQUEST_CORE_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.REQUEST_AUX_HK_ONCE,
info=GsInfo.REQUEST_AUX_HK_ONCE,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_SWITCH_V_I,
info="PDU2: Print Switches, Voltages, Currents",
options={OpCodeDictKeys.TIMEOUT: 2.0},
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=GomspaceOpCodes.PRINT_LATCHUPS,
info="PDU2: Print Latchups",
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name="pdu2",
info="PDU2 Device",
op_code_entry=op_code_dict,
)
op_code_dict = {
"0": ("ACU: Tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
"51": ("ACU: Print channel statistics", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_tuple = ("ACU Devices", op_code_dict)
cmd_dict[CustomServiceList.ACU.value] = service_tuple
def add_imtq_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_imtq = {
"0": ("IMTQ Tests All", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("IMTQ perform pos X self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("IMTQ perform neg X self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("IMTQ perform pos Y self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("IMTQ perform neg Y self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("IMTQ perform pos Z self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("IMTQ perform neg Z self test", {OpCodeDictKeys.TIMEOUT: 2.0}),
"7": ("IMTQ command dipole", {OpCodeDictKeys.TIMEOUT: 2.0}),
"8": ("IMTQ get commanded dipole", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_imtq_tuple = ("IMTQ Device", op_code_dict_srv_imtq)
cmd_dict[CustomServiceList.IMTQ.value] = service_imtq_tuple
def add_rw_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_rw = {
"0": ("Reaction Wheel: Run all commands", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("Reaction Wheel: Set speed", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Reaction Wheel: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Reaction Wheel: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Reaction Wheel: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": (
"Reaction Wheel: Send get-telemetry-command",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
}
service_rw_tuple = ("Reaction Wheel", op_code_dict_srv_rw)
cmd_dict[CustomServiceList.REACTION_WHEEL_1.value] = service_rw_tuple
cmd_dict[CustomServiceList.REACTION_WHEEL_2.value] = service_rw_tuple
cmd_dict[CustomServiceList.REACTION_WHEEL_3.value] = service_rw_tuple
cmd_dict[CustomServiceList.REACTION_WHEEL_4.value] = service_rw_tuple
def add_rad_sens_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_rad_sensor = {
"0": ("Radiation Sensor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("Radiation Sensor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Radiation Sensor: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Radiation Sensor: Start conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Radiation Sensor: Read conversions", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("Radiation Sensor: Enable debug output", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("Radiation Sensor: Disable debug putput", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_rad_sensor_tuple = ("Radiation Sensor", op_code_dict_srv_rad_sensor)
cmd_dict[CustomServiceList.RAD_SENSOR.value] = service_rad_sensor_tuple
def add_ploc_mpsoc_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_srv_ploc_mpsoc = {
"0": ("Ploc MPSoC: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("Ploc MPSoC: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("Ploc MPSoC: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("Ploc MPSoC: Memory write", {OpCodeDictKeys.TIMEOUT: 2.0}),
"4": ("Ploc MPSoC: Memory read", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("Ploc MPSoC: Flash write", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("Ploc MPSoC: Flash delete", {OpCodeDictKeys.TIMEOUT: 2.0}),
"7": ("Ploc MPSoC: Replay start", {OpCodeDictKeys.TIMEOUT: 2.0}),
"8": ("Ploc MPSoC: Replay stop", {OpCodeDictKeys.TIMEOUT: 2.0}),
"9": ("Ploc MPSoC: Downlink pwr on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"10": ("Ploc MPSoC: Downlink pwr off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"11": ("Ploc MPSoC: Replay write sequence", {OpCodeDictKeys.TIMEOUT: 2.0}),
"12": ("Ploc MPSoC: OBSW reset sequence count", {OpCodeDictKeys.TIMEOUT: 2.0}),
"13": ("Ploc MPSoC: Read DEADBEEF address", {OpCodeDictKeys.TIMEOUT: 2.0}),
"14": ("Ploc MPSoC: Mode replay", {OpCodeDictKeys.TIMEOUT: 2.0}),
"15": ("Ploc MPSoC: Mode idle", {OpCodeDictKeys.TIMEOUT: 2.0}),
"16": ("Ploc MPSoC: Tc cam command send", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_ploc_mpsoc_tuple = ("Ploc MPSoC", op_code_dict_srv_ploc_mpsoc)
cmd_dict[CustomServiceList.PLOC_MPSOC.value] = service_ploc_mpsoc_tuple
def add_ploc_supv_cmds(cmd_dict: ServiceOpCodeDictT):
op_code_dict_ploc_mem_dumper = {
"0": ("PLOC Memory Dumper: MRAM dump", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_ploc_memory_dumper_tuple = (
"PLOC Memory Dumper",
op_code_dict_ploc_mem_dumper,
)
op_code_dict_srv_ploc_supv = {
"0": ("PLOC Supervisor: Set mode off", {OpCodeDictKeys.TIMEOUT: 2.0}),
"1": ("PLOC Supervisor: Set mode on", {OpCodeDictKeys.TIMEOUT: 2.0}),
"2": ("PLOC Supervisor: Set mode normal", {OpCodeDictKeys.TIMEOUT: 2.0}),
"3": ("PLOC Supervisor: Get HK Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
"5": ("PLOC Supervisor: Start MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
"6": ("PLOC Supervisor: Shutdown MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
"7": (
"PLOC Supervisor: Select MPSoC boot image",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"8": ("PLOC Supervisor: Set max restart tries", {OpCodeDictKeys.TIMEOUT: 2.0}),
"9": ("PLOC Supervisor: Reset MPSoC", {OpCodeDictKeys.TIMEOUT: 2.0}),
"10": ("PLOC Supervisor: Set time reference", {OpCodeDictKeys.TIMEOUT: 2.0}),
"11": ("PLOC Supervisor: Set boot timeout", {OpCodeDictKeys.TIMEOUT: 2.0}),
"12": ("PLOC Supervisor: Disable Hk", {OpCodeDictKeys.TIMEOUT: 2.0}),
"13": (
"PLOC Supervisor: Request boot status report",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"17": ("PLOC Supervisor: Enable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
"18": ("PLOC Supervisor: Disable latchup alert", {OpCodeDictKeys.TIMEOUT: 2.0}),
"20": ("PLOC Supervisor: Set alert limit", {OpCodeDictKeys.TIMEOUT: 2.0}),
"23": (
"PLOC Supervisor: Set ADC enabled channels",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"24": (
"PLOC Supervisor: Set ADC window and stride",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"25": ("PLOC Supervisor: Set ADC threshold", {OpCodeDictKeys.TIMEOUT: 2.0}),
"26": (
"PLOC Supervisor: Request latchup status report",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"27": ("PLOC Supervisor: Copy ADC data to MRAM", {OpCodeDictKeys.TIMEOUT: 2.0}),
"30": ("PLOC Supervisor: Run auto EM tests", {OpCodeDictKeys.TIMEOUT: 2.0}),
"31": ("PLOC Supervisor: MRAM Wipe", {OpCodeDictKeys.TIMEOUT: 2.0}),
"35": ("PLOC Supervisor: Set GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
"36": ("PLOC Supervisor: Read GPIO", {OpCodeDictKeys.TIMEOUT: 2.0}),
"37": ("PLOC Supervisor: Restart supervisor", {OpCodeDictKeys.TIMEOUT: 2.0}),
"38": (
"PLOC Supervisor: Factory reset clear all",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"39": (
"PLOC Supervisor: Factory reset clear mirror entries",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"40": (
"PLOC Supervisor: Factory reset clear circular entries",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"42": ("PLOC Supervisor: Perform update", {OpCodeDictKeys.TIMEOUT: 2.0}),
"43": (
"PLOC Supervisor: Terminate supervisor process",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"44": ("PLOC Supervisor: Start MPSoC quiet", {OpCodeDictKeys.TIMEOUT: 2.0}),
"45": ("PLOC Supervisor: Set shutdown timeout", {OpCodeDictKeys.TIMEOUT: 2.0}),
"46": ("PLOC Supervisor: Factory flash", {OpCodeDictKeys.TIMEOUT: 2.0}),
"47": ("PLOC Supervisor: Enable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
"48": ("PLOC Supervisor: Disable auto TM", {OpCodeDictKeys.TIMEOUT: 2.0}),
"51": (
"PLOC Supervisor: Logging request event buffers",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"52": (
"PLOC Supervisor: Logging clear counters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"53": ("PLOC Supervisor: Logging set topic", {OpCodeDictKeys.TIMEOUT: 2.0}),
"54": (
"PLOC Supervisor: Logging request counters",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"55": ("PLOC Supervisor: Request ADC Report", {OpCodeDictKeys.TIMEOUT: 2.0}),
"56": ("PLOC Supervisor: Reset PL", {OpCodeDictKeys.TIMEOUT: 2.0}),
}
service_ploc_supv_tuple = ("PLOC Supervisor", op_code_dict_srv_ploc_supv)
op_code_dict_srv_ploc_updater = {
"0": (
"Ploc Updater: Update uboot on partition A",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"1": (
"Ploc Updater: Update bitstream on partition A",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"2": (
"Ploc Updater: Update linux on partition A",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"3": (
"Ploc Updater: Update application on partition A",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"4": (
"Ploc Updater: Update uboot on partition B",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"5": (
"Ploc Updater: Update bitstream on partition B",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"6": (
"Ploc Updater: Update linux on partition B",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
"7": (
"Ploc Updater: Update application on partition B",
{OpCodeDictKeys.TIMEOUT: 2.0},
),
}
service_ploc_updater_tuple = ("Ploc Updater", op_code_dict_srv_ploc_updater)
cmd_dict[CustomServiceList.PLOC_SUPV.value] = service_ploc_supv_tuple
cmd_dict[CustomServiceList.PLOC_UPDATER.value] = service_ploc_updater_tuple
cmd_dict[
CustomServiceList.PLOC_MEMORY_DUMPER.value
] = service_ploc_memory_dumper_tuple
def add_system_cmds(cmd_dict: ServiceOpCodeDictT):
from pus_tc.system.acs import AcsOpCodes, SusOpCodes
import pus_tc.system.tcs as tcs
default_opts = generate_op_code_options(
enter_listener_mode=False, custom_timeout=8.0
)
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_A_SIDE,
info="Switch to ACS board A side",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_B_SIDE,
info="Switch to ACS board B side",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_DUAL_MODE,
info="Switch to ACS board dual mode",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_A_ON,
info="Switch ACS board A side on",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_B_ON,
info="Switch ACS board B side on",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_DUAL_ON,
info="Switch ACS board dual mode on",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=AcsOpCodes.ACS_ASS_OFF,
info="Switch off ACS board",
options=default_opts,
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.ACS_ASS.value,
info="ACS Assemblies",
op_code_entry=op_code_dict,
)
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=SusOpCodes.SUS_ASS_NOM_SIDE,
info="Switch SUS board to nominal side",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=SusOpCodes.SUS_ASS_RED_SIDE,
info="Switch SUS board to redundant side",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=SusOpCodes.SUS_ASS_OFF,
info="Switch off SUS board",
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=SusOpCodes.SUS_ASS_DUAL_MODE,
info="Switch SUS board to dual mode",
options=default_opts,
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.SUS_ASS.value,
info="SUS Assembly",
op_code_entry=op_code_dict,
)
op_code_dict = dict()
add_op_code_entry(
op_code_dict=op_code_dict,
keys=tcs.OpCodes.TCS_BOARD_ASS_NORMAL,
info=tcs.Info.TCS_BOARD_ASS_NORMAL,
options=default_opts,
)
add_op_code_entry(
op_code_dict=op_code_dict,
keys=tcs.OpCodes.TCS_BOARD_ASS_OFF,
info=tcs.Info.TCS_BOARD_ASS_OFF,
options=default_opts,
)
add_service_op_code_entry(
srv_op_code_dict=cmd_dict,
name=CustomServiceList.TCS_ASS.value,
info="TCS Board Assembly",
op_code_entry=op_code_dict,
)