fsfw/cmake/cmake-modules/bilke/CodeCoverage.cmake

720 lines
29 KiB
CMake
Raw Permalink Normal View History

# Copyright (c) 2012 - 2017, Lars Bilke
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without modification,
# are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice, this
# list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# CHANGES:
#
# 2012-01-31, Lars Bilke
# - Enable Code Coverage
#
# 2013-09-17, Joakim Söderberg
# - Added support for Clang.
# - Some additional usage instructions.
#
# 2016-02-03, Lars Bilke
# - Refactored functions to use named parameters
#
# 2017-06-02, Lars Bilke
# - Merged with modified version from github.com/ufz/ogs
#
# 2019-05-06, Anatolii Kurotych
# - Remove unnecessary --coverage flag
#
# 2019-12-13, FeRD (Frank Dana)
# - Deprecate COVERAGE_LCOVR_EXCLUDES and COVERAGE_GCOVR_EXCLUDES lists in favor
# of tool-agnostic COVERAGE_EXCLUDES variable, or EXCLUDE setup arguments.
# - CMake 3.4+: All excludes can be specified relative to BASE_DIRECTORY
# - All setup functions: accept BASE_DIRECTORY, EXCLUDE list
# - Set lcov basedir with -b argument
# - Add automatic --demangle-cpp in lcovr, if 'c++filt' is available (can be
# overridden with NO_DEMANGLE option in setup_target_for_coverage_lcovr().)
# - Delete output dir, .info file on 'make clean'
# - Remove Python detection, since version mismatches will break gcovr
# - Minor cleanup (lowercase function names, update examples...)
#
# 2019-12-19, FeRD (Frank Dana)
# - Rename Lcov outputs, make filtered file canonical, fix cleanup for targets
#
# 2020-01-19, Bob Apthorpe
# - Added gfortran support
#
# 2020-02-17, FeRD (Frank Dana)
# - Make all add_custom_target()s VERBATIM to auto-escape wildcard characters
# in EXCLUDEs, and remove manual escaping from gcovr targets
#
# 2021-01-19, Robin Mueller
# - Add CODE_COVERAGE_VERBOSE option which will allow to print out commands which are run
# - Added the option for users to set the GCOVR_ADDITIONAL_ARGS variable to supply additional
# flags to the gcovr command
#
# 2020-05-04, Mihchael Davis
# - Add -fprofile-abs-path to make gcno files contain absolute paths
# - Fix BASE_DIRECTORY not working when defined
# - Change BYPRODUCT from folder to index.html to stop ninja from complaining about double defines
#
# 2021-05-10, Martin Stump
# - Check if the generator is multi-config before warning about non-Debug builds
#
# 2022-02-22, Marko Wehle
# - Change gcovr output from -o <filename> for --xml <filename> and --html <filename> output respectively.
# This will allow for Multiple Output Formats at the same time by making use of GCOVR_ADDITIONAL_ARGS, e.g. GCOVR_ADDITIONAL_ARGS "--txt".
#
# USAGE:
#
# 1. Copy this file into your cmake modules path.
#
# 2. Add the following line to your CMakeLists.txt (best inside an if-condition
# using a CMake option() to enable it just optionally):
# include(CodeCoverage)
#
# 3. Append necessary compiler flags for all supported source files:
# append_coverage_compiler_flags()
# Or for specific target:
# append_coverage_compiler_flags_to_target(YOUR_TARGET_NAME)
#
# 3.a (OPTIONAL) Set appropriate optimization flags, e.g. -O0, -O1 or -Og
#
# 4. If you need to exclude additional directories from the report, specify them
# using full paths in the COVERAGE_EXCLUDES variable before calling
# setup_target_for_coverage_*().
# Example:
# set(COVERAGE_EXCLUDES
# '${PROJECT_SOURCE_DIR}/src/dir1/*'
# '/path/to/my/src/dir2/*')
# Or, use the EXCLUDE argument to setup_target_for_coverage_*().
# Example:
# setup_target_for_coverage_lcov(
# NAME coverage
# EXECUTABLE testrunner
# EXCLUDE "${PROJECT_SOURCE_DIR}/src/dir1/*" "/path/to/my/src/dir2/*")
#
# 4.a NOTE: With CMake 3.4+, COVERAGE_EXCLUDES or EXCLUDE can also be set
# relative to the BASE_DIRECTORY (default: PROJECT_SOURCE_DIR)
# Example:
# set(COVERAGE_EXCLUDES "dir1/*")
# setup_target_for_coverage_gcovr_html(
# NAME coverage
# EXECUTABLE testrunner
# BASE_DIRECTORY "${PROJECT_SOURCE_DIR}/src"
# EXCLUDE "dir2/*")
#
# 5. Use the functions described below to create a custom make target which
# runs your test executable and produces a code coverage report.
#
# 6. Build a Debug build:
# cmake -DCMAKE_BUILD_TYPE=Debug ..
# make
# make my_coverage_target
#
include(CMakeParseArguments)
option(CODE_COVERAGE_VERBOSE "Verbose information" FALSE)
# Check prereqs
find_program( GCOV_PATH gcov )
find_program( LCOV_PATH NAMES lcov lcov.bat lcov.exe lcov.perl)
find_program( FASTCOV_PATH NAMES fastcov fastcov.py )
find_program( GENHTML_PATH NAMES genhtml genhtml.perl genhtml.bat )
2022-11-09 17:54:08 +01:00
find_program( GCOVR_PATH gcovr )
find_program( CPPFILT_PATH NAMES c++filt )
if(NOT GCOV_PATH)
message(FATAL_ERROR "gcov not found! Aborting...")
endif() # NOT GCOV_PATH
get_property(LANGUAGES GLOBAL PROPERTY ENABLED_LANGUAGES)
list(GET LANGUAGES 0 LANG)
if("${CMAKE_${LANG}_COMPILER_ID}" MATCHES "(Apple)?[Cc]lang")
if("${CMAKE_${LANG}_COMPILER_VERSION}" VERSION_LESS 3)
message(FATAL_ERROR "Clang version must be 3.0.0 or greater! Aborting...")
endif()
elseif(NOT CMAKE_COMPILER_IS_GNUCXX)
if("${CMAKE_Fortran_COMPILER_ID}" MATCHES "[Ff]lang")
# Do nothing; exit conditional without error if true
elseif("${CMAKE_Fortran_COMPILER_ID}" MATCHES "GNU")
# Do nothing; exit conditional without error if true
else()
message(FATAL_ERROR "Compiler is not GNU gcc! Aborting...")
endif()
endif()
set(COVERAGE_COMPILER_FLAGS "-g -fprofile-arcs -ftest-coverage"
CACHE INTERNAL "")
if(CMAKE_CXX_COMPILER_ID MATCHES "(GNU|Clang)")
include(CheckCXXCompilerFlag)
check_cxx_compiler_flag(-fprofile-abs-path HAVE_fprofile_abs_path)
if(HAVE_fprofile_abs_path)
set(COVERAGE_COMPILER_FLAGS "${COVERAGE_COMPILER_FLAGS} -fprofile-abs-path")
endif()
endif()
set(CMAKE_Fortran_FLAGS_COVERAGE
${COVERAGE_COMPILER_FLAGS}
CACHE STRING "Flags used by the Fortran compiler during coverage builds."
FORCE )
set(CMAKE_CXX_FLAGS_COVERAGE
${COVERAGE_COMPILER_FLAGS}
CACHE STRING "Flags used by the C++ compiler during coverage builds."
FORCE )
set(CMAKE_C_FLAGS_COVERAGE
${COVERAGE_COMPILER_FLAGS}
CACHE STRING "Flags used by the C compiler during coverage builds."
FORCE )
set(CMAKE_EXE_LINKER_FLAGS_COVERAGE
""
CACHE STRING "Flags used for linking binaries during coverage builds."
FORCE )
set(CMAKE_SHARED_LINKER_FLAGS_COVERAGE
""
CACHE STRING "Flags used by the shared libraries linker during coverage builds."
FORCE )
mark_as_advanced(
CMAKE_Fortran_FLAGS_COVERAGE
CMAKE_CXX_FLAGS_COVERAGE
CMAKE_C_FLAGS_COVERAGE
CMAKE_EXE_LINKER_FLAGS_COVERAGE
CMAKE_SHARED_LINKER_FLAGS_COVERAGE )
get_property(GENERATOR_IS_MULTI_CONFIG GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
if(NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG))
message(WARNING "Code coverage results with an optimised (non-Debug) build may be misleading")
endif() # NOT (CMAKE_BUILD_TYPE STREQUAL "Debug" OR GENERATOR_IS_MULTI_CONFIG)
if(CMAKE_C_COMPILER_ID STREQUAL "GNU" OR CMAKE_Fortran_COMPILER_ID STREQUAL "GNU")
link_libraries(gcov)
endif()
# Defines a target for running and collection code coverage information
# Builds dependencies, runs the given executable and outputs reports.
# NOTE! The executable should always have a ZERO as exit code otherwise
# the coverage generation will not complete.
#
# setup_target_for_coverage_lcov(
# NAME testrunner_coverage # New target name
# EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
# DEPENDENCIES testrunner # Dependencies to build first
# BASE_DIRECTORY "../" # Base directory for report
# # (defaults to PROJECT_SOURCE_DIR)
# EXCLUDE "src/dir1/*" "src/dir2/*" # Patterns to exclude (can be relative
# # to BASE_DIRECTORY, with CMake 3.4+)
# NO_DEMANGLE # Don't demangle C++ symbols
# # even if c++filt is found
# )
function(setup_target_for_coverage_lcov)
set(options NO_DEMANGLE)
set(oneValueArgs BASE_DIRECTORY NAME)
set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES LCOV_ARGS GENHTML_ARGS)
cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
if(NOT LCOV_PATH)
message(FATAL_ERROR "lcov not found! Aborting...")
endif() # NOT LCOV_PATH
if(NOT GENHTML_PATH)
message(FATAL_ERROR "genhtml not found! Aborting...")
endif() # NOT GENHTML_PATH
# Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
if(DEFINED Coverage_BASE_DIRECTORY)
get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
else()
set(BASEDIR ${PROJECT_SOURCE_DIR})
endif()
# Collect excludes (CMake 3.4+: Also compute absolute paths)
set(LCOV_EXCLUDES "")
foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_LCOV_EXCLUDES})
if(CMAKE_VERSION VERSION_GREATER 3.4)
get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
endif()
list(APPEND LCOV_EXCLUDES "${EXCLUDE}")
endforeach()
list(REMOVE_DUPLICATES LCOV_EXCLUDES)
# Conditional arguments
if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
set(GENHTML_EXTRA_ARGS "--demangle-cpp")
endif()
# Setting up commands which will be run to generate coverage data.
# Cleanup lcov
set(LCOV_CLEAN_CMD
${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -directory .
-b ${BASEDIR} --zerocounters
)
# Create baseline to make sure untouched files show up in the report
set(LCOV_BASELINE_CMD
${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -c -i -d . -b
${BASEDIR} -o ${Coverage_NAME}.base
)
# Run tests
set(LCOV_EXEC_TESTS_CMD
${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
)
# Capturing lcov counters and generating report
set(LCOV_CAPTURE_CMD
${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --directory . -b
${BASEDIR} --capture --output-file ${Coverage_NAME}.capture
)
# add baseline counters
set(LCOV_BASELINE_COUNT_CMD
${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} -a ${Coverage_NAME}.base
-a ${Coverage_NAME}.capture --output-file ${Coverage_NAME}.total
)
# filter collected data to final coverage report
set(LCOV_FILTER_CMD
${LCOV_PATH} ${Coverage_LCOV_ARGS} --gcov-tool ${GCOV_PATH} --remove
${Coverage_NAME}.total ${LCOV_EXCLUDES} --output-file ${Coverage_NAME}.info
)
# Generate HTML output
set(LCOV_GEN_HTML_CMD
${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS} -o
${Coverage_NAME} ${Coverage_NAME}.info
)
if(CODE_COVERAGE_VERBOSE)
message(STATUS "Executed command report")
message(STATUS "Command to clean up lcov: ")
string(REPLACE ";" " " LCOV_CLEAN_CMD_SPACED "${LCOV_CLEAN_CMD}")
message(STATUS "${LCOV_CLEAN_CMD_SPACED}")
message(STATUS "Command to create baseline: ")
string(REPLACE ";" " " LCOV_BASELINE_CMD_SPACED "${LCOV_BASELINE_CMD}")
message(STATUS "${LCOV_BASELINE_CMD_SPACED}")
message(STATUS "Command to run the tests: ")
string(REPLACE ";" " " LCOV_EXEC_TESTS_CMD_SPACED "${LCOV_EXEC_TESTS_CMD}")
message(STATUS "${LCOV_EXEC_TESTS_CMD_SPACED}")
message(STATUS "Command to capture counters and generate report: ")
string(REPLACE ";" " " LCOV_CAPTURE_CMD_SPACED "${LCOV_CAPTURE_CMD}")
message(STATUS "${LCOV_CAPTURE_CMD_SPACED}")
message(STATUS "Command to add baseline counters: ")
string(REPLACE ";" " " LCOV_BASELINE_COUNT_CMD_SPACED "${LCOV_BASELINE_COUNT_CMD}")
message(STATUS "${LCOV_BASELINE_COUNT_CMD_SPACED}")
message(STATUS "Command to filter collected data: ")
string(REPLACE ";" " " LCOV_FILTER_CMD_SPACED "${LCOV_FILTER_CMD}")
message(STATUS "${LCOV_FILTER_CMD_SPACED}")
message(STATUS "Command to generate lcov HTML output: ")
string(REPLACE ";" " " LCOV_GEN_HTML_CMD_SPACED "${LCOV_GEN_HTML_CMD}")
message(STATUS "${LCOV_GEN_HTML_CMD_SPACED}")
endif()
# Setup target
add_custom_target(${Coverage_NAME}
COMMAND ${LCOV_CLEAN_CMD}
COMMAND ${LCOV_BASELINE_CMD}
COMMAND ${LCOV_EXEC_TESTS_CMD}
COMMAND ${LCOV_CAPTURE_CMD}
COMMAND ${LCOV_BASELINE_COUNT_CMD}
COMMAND ${LCOV_FILTER_CMD}
COMMAND ${LCOV_GEN_HTML_CMD}
# Set output files as GENERATED (will be removed on 'make clean')
BYPRODUCTS
${Coverage_NAME}.base
${Coverage_NAME}.capture
${Coverage_NAME}.total
${Coverage_NAME}.info
${Coverage_NAME}/index.html
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
DEPENDS ${Coverage_DEPENDENCIES}
VERBATIM # Protect arguments to commands
COMMENT "Resetting code coverage counters to zero.\nProcessing code coverage counters and generating report."
)
# Show where to find the lcov info report
add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
COMMAND ;
COMMENT "Lcov code coverage info report saved in ${Coverage_NAME}.info."
)
# Show info where to find the report
add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
COMMAND ;
COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
)
endfunction() # setup_target_for_coverage_lcov
# Defines a target for running and collection code coverage information
# Builds dependencies, runs the given executable and outputs reports.
# NOTE! The executable should always have a ZERO as exit code otherwise
# the coverage generation will not complete.
#
# setup_target_for_coverage_gcovr_xml(
# NAME ctest_coverage # New target name
# EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
# DEPENDENCIES executable_target # Dependencies to build first
# BASE_DIRECTORY "../" # Base directory for report
# # (defaults to PROJECT_SOURCE_DIR)
# EXCLUDE "src/dir1/*" "src/dir2/*" # Patterns to exclude (can be relative
# # to BASE_DIRECTORY, with CMake 3.4+)
# )
# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
# GCVOR command.
function(setup_target_for_coverage_gcovr_xml)
set(options NONE)
set(oneValueArgs BASE_DIRECTORY NAME)
set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
if(NOT GCOVR_PATH)
message(FATAL_ERROR "gcovr not found! Aborting...")
endif() # NOT GCOVR_PATH
# Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
if(DEFINED Coverage_BASE_DIRECTORY)
get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
else()
set(BASEDIR ${PROJECT_SOURCE_DIR})
endif()
# Collect excludes (CMake 3.4+: Also compute absolute paths)
set(GCOVR_EXCLUDES "")
foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
if(CMAKE_VERSION VERSION_GREATER 3.4)
get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
endif()
list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
endforeach()
list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
# Combine excludes to several -e arguments
set(GCOVR_EXCLUDE_ARGS "")
foreach(EXCLUDE ${GCOVR_EXCLUDES})
list(APPEND GCOVR_EXCLUDE_ARGS "-e")
list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
endforeach()
# Set up commands which will be run to generate coverage data
# Run tests
set(GCOVR_XML_EXEC_TESTS_CMD
${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
)
# Running gcovr
set(GCOVR_XML_CMD
${GCOVR_PATH} --xml ${Coverage_NAME}.xml -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
)
if(CODE_COVERAGE_VERBOSE)
message(STATUS "Executed command report")
message(STATUS "Command to run tests: ")
string(REPLACE ";" " " GCOVR_XML_EXEC_TESTS_CMD_SPACED "${GCOVR_XML_EXEC_TESTS_CMD}")
message(STATUS "${GCOVR_XML_EXEC_TESTS_CMD_SPACED}")
message(STATUS "Command to generate gcovr XML coverage data: ")
string(REPLACE ";" " " GCOVR_XML_CMD_SPACED "${GCOVR_XML_CMD}")
message(STATUS "${GCOVR_XML_CMD_SPACED}")
endif()
add_custom_target(${Coverage_NAME}
COMMAND ${GCOVR_XML_EXEC_TESTS_CMD}
COMMAND ${GCOVR_XML_CMD}
BYPRODUCTS ${Coverage_NAME}.xml
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
DEPENDS ${Coverage_DEPENDENCIES}
VERBATIM # Protect arguments to commands
COMMENT "Running gcovr to produce Cobertura code coverage report."
)
# Show info where to find the report
add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
COMMAND ;
COMMENT "Cobertura code coverage report saved in ${Coverage_NAME}.xml."
)
endfunction() # setup_target_for_coverage_gcovr_xml
# Defines a target for running and collection code coverage information
# Builds dependencies, runs the given executable and outputs reports.
# NOTE! The executable should always have a ZERO as exit code otherwise
# the coverage generation will not complete.
#
# setup_target_for_coverage_gcovr_html(
# NAME ctest_coverage # New target name
# EXECUTABLE ctest -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
# DEPENDENCIES executable_target # Dependencies to build first
# BASE_DIRECTORY "../" # Base directory for report
# # (defaults to PROJECT_SOURCE_DIR)
# EXCLUDE "src/dir1/*" "src/dir2/*" # Patterns to exclude (can be relative
# # to BASE_DIRECTORY, with CMake 3.4+)
# )
# The user can set the variable GCOVR_ADDITIONAL_ARGS to supply additional flags to the
# GCVOR command.
function(setup_target_for_coverage_gcovr_html)
set(options NONE)
set(oneValueArgs BASE_DIRECTORY NAME)
set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES)
cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
if(NOT GCOVR_PATH)
message(FATAL_ERROR "gcovr not found! Aborting...")
endif() # NOT GCOVR_PATH
# Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
if(DEFINED Coverage_BASE_DIRECTORY)
get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
else()
set(BASEDIR ${PROJECT_SOURCE_DIR})
endif()
# Collect excludes (CMake 3.4+: Also compute absolute paths)
set(GCOVR_EXCLUDES "")
foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_GCOVR_EXCLUDES})
if(CMAKE_VERSION VERSION_GREATER 3.4)
get_filename_component(EXCLUDE ${EXCLUDE} ABSOLUTE BASE_DIR ${BASEDIR})
endif()
list(APPEND GCOVR_EXCLUDES "${EXCLUDE}")
endforeach()
list(REMOVE_DUPLICATES GCOVR_EXCLUDES)
# Combine excludes to several -e arguments
set(GCOVR_EXCLUDE_ARGS "")
foreach(EXCLUDE ${GCOVR_EXCLUDES})
list(APPEND GCOVR_EXCLUDE_ARGS "-e")
list(APPEND GCOVR_EXCLUDE_ARGS "${EXCLUDE}")
endforeach()
# Set up commands which will be run to generate coverage data
# Run tests
set(GCOVR_HTML_EXEC_TESTS_CMD
${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS}
)
# Create folder
set(GCOVR_HTML_FOLDER_CMD
${CMAKE_COMMAND} -E make_directory ${PROJECT_BINARY_DIR}/${Coverage_NAME}
)
# Running gcovr
set(GCOVR_HTML_CMD
${GCOVR_PATH} --html ${Coverage_NAME}/index.html --html-details -r ${BASEDIR} ${GCOVR_ADDITIONAL_ARGS}
${GCOVR_EXCLUDE_ARGS} --object-directory=${PROJECT_BINARY_DIR}
)
if(CODE_COVERAGE_VERBOSE)
message(STATUS "Executed command report")
message(STATUS "Command to run tests: ")
string(REPLACE ";" " " GCOVR_HTML_EXEC_TESTS_CMD_SPACED "${GCOVR_HTML_EXEC_TESTS_CMD}")
message(STATUS "${GCOVR_HTML_EXEC_TESTS_CMD_SPACED}")
message(STATUS "Command to create a folder: ")
string(REPLACE ";" " " GCOVR_HTML_FOLDER_CMD_SPACED "${GCOVR_HTML_FOLDER_CMD}")
message(STATUS "${GCOVR_HTML_FOLDER_CMD_SPACED}")
message(STATUS "Command to generate gcovr HTML coverage data: ")
string(REPLACE ";" " " GCOVR_HTML_CMD_SPACED "${GCOVR_HTML_CMD}")
message(STATUS "${GCOVR_HTML_CMD_SPACED}")
endif()
add_custom_target(${Coverage_NAME}
COMMAND ${GCOVR_HTML_EXEC_TESTS_CMD}
COMMAND ${GCOVR_HTML_FOLDER_CMD}
COMMAND ${GCOVR_HTML_CMD}
BYPRODUCTS ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html # report directory
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
DEPENDS ${Coverage_DEPENDENCIES}
VERBATIM # Protect arguments to commands
COMMENT "Running gcovr to produce HTML code coverage report."
)
# Show info where to find the report
add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
COMMAND ;
COMMENT "Open ./${Coverage_NAME}/index.html in your browser to view the coverage report."
)
endfunction() # setup_target_for_coverage_gcovr_html
# Defines a target for running and collection code coverage information
# Builds dependencies, runs the given executable and outputs reports.
# NOTE! The executable should always have a ZERO as exit code otherwise
# the coverage generation will not complete.
#
# setup_target_for_coverage_fastcov(
# NAME testrunner_coverage # New target name
# EXECUTABLE testrunner -j ${PROCESSOR_COUNT} # Executable in PROJECT_BINARY_DIR
# DEPENDENCIES testrunner # Dependencies to build first
# BASE_DIRECTORY "../" # Base directory for report
# # (defaults to PROJECT_SOURCE_DIR)
# EXCLUDE "src/dir1/" "src/dir2/" # Patterns to exclude.
# NO_DEMANGLE # Don't demangle C++ symbols
# # even if c++filt is found
# SKIP_HTML # Don't create html report
# POST_CMD perl -i -pe s!${PROJECT_SOURCE_DIR}/!!g ctest_coverage.json # E.g. for stripping source dir from file paths
# )
function(setup_target_for_coverage_fastcov)
set(options NO_DEMANGLE SKIP_HTML)
set(oneValueArgs BASE_DIRECTORY NAME)
set(multiValueArgs EXCLUDE EXECUTABLE EXECUTABLE_ARGS DEPENDENCIES FASTCOV_ARGS GENHTML_ARGS POST_CMD)
cmake_parse_arguments(Coverage "${options}" "${oneValueArgs}" "${multiValueArgs}" ${ARGN})
if(NOT FASTCOV_PATH)
message(FATAL_ERROR "fastcov not found! Aborting...")
endif()
if(NOT Coverage_SKIP_HTML AND NOT GENHTML_PATH)
message(FATAL_ERROR "genhtml not found! Aborting...")
endif()
# Set base directory (as absolute path), or default to PROJECT_SOURCE_DIR
if(Coverage_BASE_DIRECTORY)
get_filename_component(BASEDIR ${Coverage_BASE_DIRECTORY} ABSOLUTE)
else()
set(BASEDIR ${PROJECT_SOURCE_DIR})
endif()
# Collect excludes (Patterns, not paths, for fastcov)
set(FASTCOV_EXCLUDES "")
foreach(EXCLUDE ${Coverage_EXCLUDE} ${COVERAGE_EXCLUDES} ${COVERAGE_FASTCOV_EXCLUDES})
list(APPEND FASTCOV_EXCLUDES "${EXCLUDE}")
endforeach()
list(REMOVE_DUPLICATES FASTCOV_EXCLUDES)
# Conditional arguments
if(CPPFILT_PATH AND NOT ${Coverage_NO_DEMANGLE})
set(GENHTML_EXTRA_ARGS "--demangle-cpp")
endif()
# Set up commands which will be run to generate coverage data
set(FASTCOV_EXEC_TESTS_CMD ${Coverage_EXECUTABLE} ${Coverage_EXECUTABLE_ARGS})
set(FASTCOV_CAPTURE_CMD ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
--search-directory ${BASEDIR}
--process-gcno
--output ${Coverage_NAME}.json
--exclude ${FASTCOV_EXCLUDES}
--exclude ${FASTCOV_EXCLUDES}
)
set(FASTCOV_CONVERT_CMD ${FASTCOV_PATH}
-C ${Coverage_NAME}.json --lcov --output ${Coverage_NAME}.info
)
if(Coverage_SKIP_HTML)
set(FASTCOV_HTML_CMD ";")
else()
set(FASTCOV_HTML_CMD ${GENHTML_PATH} ${GENHTML_EXTRA_ARGS} ${Coverage_GENHTML_ARGS}
-o ${Coverage_NAME} ${Coverage_NAME}.info
)
endif()
set(FASTCOV_POST_CMD ";")
if(Coverage_POST_CMD)
set(FASTCOV_POST_CMD ${Coverage_POST_CMD})
endif()
if(CODE_COVERAGE_VERBOSE)
message(STATUS "Code coverage commands for target ${Coverage_NAME} (fastcov):")
message(" Running tests:")
string(REPLACE ";" " " FASTCOV_EXEC_TESTS_CMD_SPACED "${FASTCOV_EXEC_TESTS_CMD}")
message(" ${FASTCOV_EXEC_TESTS_CMD_SPACED}")
message(" Capturing fastcov counters and generating report:")
string(REPLACE ";" " " FASTCOV_CAPTURE_CMD_SPACED "${FASTCOV_CAPTURE_CMD}")
message(" ${FASTCOV_CAPTURE_CMD_SPACED}")
message(" Converting fastcov .json to lcov .info:")
string(REPLACE ";" " " FASTCOV_CONVERT_CMD_SPACED "${FASTCOV_CONVERT_CMD}")
message(" ${FASTCOV_CONVERT_CMD_SPACED}")
if(NOT Coverage_SKIP_HTML)
message(" Generating HTML report: ")
string(REPLACE ";" " " FASTCOV_HTML_CMD_SPACED "${FASTCOV_HTML_CMD}")
message(" ${FASTCOV_HTML_CMD_SPACED}")
endif()
if(Coverage_POST_CMD)
message(" Running post command: ")
string(REPLACE ";" " " FASTCOV_POST_CMD_SPACED "${FASTCOV_POST_CMD}")
message(" ${FASTCOV_POST_CMD_SPACED}")
endif()
endif()
# Setup target
add_custom_target(${Coverage_NAME}
# Cleanup fastcov
COMMAND ${FASTCOV_PATH} ${Coverage_FASTCOV_ARGS} --gcov ${GCOV_PATH}
--search-directory ${BASEDIR}
--zerocounters
COMMAND ${FASTCOV_EXEC_TESTS_CMD}
COMMAND ${FASTCOV_CAPTURE_CMD}
COMMAND ${FASTCOV_CONVERT_CMD}
COMMAND ${FASTCOV_HTML_CMD}
COMMAND ${FASTCOV_POST_CMD}
# Set output files as GENERATED (will be removed on 'make clean')
BYPRODUCTS
${Coverage_NAME}.info
${Coverage_NAME}.json
${Coverage_NAME}/index.html # report directory
WORKING_DIRECTORY ${PROJECT_BINARY_DIR}
DEPENDS ${Coverage_DEPENDENCIES}
VERBATIM # Protect arguments to commands
COMMENT "Resetting code coverage counters to zero. Processing code coverage counters and generating report."
)
set(INFO_MSG "fastcov code coverage info report saved in ${Coverage_NAME}.info and ${Coverage_NAME}.json.")
if(NOT Coverage_SKIP_HTML)
string(APPEND INFO_MSG " Open ${PROJECT_BINARY_DIR}/${Coverage_NAME}/index.html in your browser to view the coverage report.")
endif()
# Show where to find the fastcov info report
add_custom_command(TARGET ${Coverage_NAME} POST_BUILD
COMMAND ${CMAKE_COMMAND} -E echo ${INFO_MSG}
)
endfunction() # setup_target_for_coverage_fastcov
function(append_coverage_compiler_flags)
set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
set(CMAKE_Fortran_FLAGS "${CMAKE_Fortran_FLAGS} ${COVERAGE_COMPILER_FLAGS}" PARENT_SCOPE)
message(STATUS "Appending code coverage compiler flags: ${COVERAGE_COMPILER_FLAGS}")
endfunction() # append_coverage_compiler_flags
# Setup coverage for specific library
function(append_coverage_compiler_flags_to_target name)
target_compile_options(${name}
PRIVATE ${COVERAGE_COMPILER_FLAGS})
endfunction()