fsfw/devicehandlers/DeviceHandlerBase.h

1176 lines
44 KiB
C
Raw Normal View History

#ifndef DEVICEHANDLERBASE_H_
#define DEVICEHANDLERBASE_H_
#include <framework/objectmanager/SystemObject.h>
#include <framework/tasks/ExecutableObjectIF.h>
2020-03-23 18:05:39 +01:00
#include <framework/devicehandlers/DeviceHandlerIF.h>
#include <framework/returnvalues/HasReturnvaluesIF.h>
#include <framework/action/HasActionsIF.h>
#include <framework/datapool/PoolVariableIF.h>
#include <framework/devicehandlers/DeviceCommunicationIF.h>
#include <framework/modes/HasModesIF.h>
#include <framework/power/PowerSwitchIF.h>
#include <framework/ipc/MessageQueueIF.h>
#include <framework/action/ActionHelper.h>
#include <framework/health/HealthHelper.h>
#include <framework/parameters/ParameterHelper.h>
#include <framework/datapool/HkSwitchHelper.h>
#include <framework/devicehandlers/DeviceHandlerFailureIsolation.h>
#include <map>
namespace Factory{
void setStaticFrameworkObjectIds();
}
class StorageManagerIF;
/**
* @defgroup devices Devices
* Contains all devices and the DeviceHandlerBase class.
*/
/**
* @brief This is the abstract base class for device handlers.
* @details
* Documentation: Dissertation Baetz p.138,139, p.141-149
*
* It features handling of @link DeviceHandlerIF::Mode_t Modes @endlink,
* communication with physical devices, using the @link DeviceCommunicationIF @endlink,
* and communication with commanding objects.
* It inherits SystemObject and thus can be created by the ObjectManagerIF.
*
* This class uses the opcode of ExecutableObjectIF to perform a step-wise execution.
* For each step an RMAP action is selected and executed.
* If data has been received (GET_READ), the data will be interpreted.
* The action for each step can be defined by the child class but as most
* device handlers share a 4-call (sendRead-getRead-sendWrite-getWrite) structure,
* a default implementation is provided. NOTE: RMAP is a standard which is used for FLP.
* RMAP communication is not mandatory for projects implementing the FSFW.
* However, the communication principles are similar to RMAP as there are
* two write and two send calls involved.
*
* Device handler instances should extend this class and implement the abstract functions.
* Components and drivers can send so called cookies which are used for communication
* and contain information about the communcation (e.g. slave address for I2C or RMAP structs).
* The following abstract methods must be implemented by a device handler:
* 1. doStartUp()
* 2. doShutDown()
* 3. buildTransitionDeviceCommand()
* 4. buildNormalDeviceCommand()
* 5. buildCommandFromCommand()
* 6. fillCommandAndReplyMap()
* 7. scanForReply()
* 8. interpretDeviceReply()
*
* Other important virtual methods with a default implementation
* are the getTransitionDelayMs() function and the getSwitches() function.
* Please ensure that getSwitches() returns DeviceHandlerIF::NO_SWITCHES if
* power switches are not implemented yet. Otherwise, the device handler will
* not transition to MODE_ON, even if setMode(MODE_ON) is called.
* If a transition to MODE_ON is desired without commanding, override the
* intialize() function and call setMode(_MODE_START_UP) before calling
* DeviceHandlerBase::initialize().
*
* @ingroup devices
*/
class DeviceHandlerBase: public DeviceHandlerIF,
public HasReturnvaluesIF,
public ExecutableObjectIF,
public SystemObject,
public HasModesIF,
public HasHealthIF,
public HasActionsIF,
public ReceivesParameterMessagesIF {
friend void (Factory::setStaticFrameworkObjectIds)();
public:
/**
* The constructor passes the objectId to the SystemObject().
*
* @param setObjectId the ObjectId to pass to the SystemObject() Constructor
* @param maxDeviceReplyLen the length the RMAP getRead call will be sent with
* @param setDeviceSwitch the switch the device is connected to,
* for devices using two switches, overwrite getSwitches()
* @param deviceCommuncation Communcation Interface object which is used
* to implement communication functions
* @param thermalStatePoolId
* @param thermalRequestPoolId
* @param fdirInstance
* @param cmdQueueSize
*/
DeviceHandlerBase(object_id_t setObjectId, object_id_t deviceCommunication,
CookieIF * comCookie, uint8_t setDeviceSwitch,
uint32_t thermalStatePoolId = PoolVariableIF::NO_PARAMETER,
uint32_t thermalRequestPoolId = PoolVariableIF::NO_PARAMETER,
FailureIsolationBase* fdirInstance = nullptr,
size_t cmdQueueSize = 20);
/**
* @brief This function is the device handler base core component and is
* called periodically.
* @details
* General sequence, showing where abstract virtual functions are called:
* If the State is SEND_WRITE:
* 1. Set the cookie state to COOKIE_UNUSED and read the command queue
* 2. Handles Device State Modes by calling doStateMachine().
* This function calls callChildStatemachine() which calls the
* abstract functions doStartUp() and doShutDown()
* 3. Check switch states by calling checkSwitchStates()
* 4. Decrements counter for timeout of replies by calling
* decrementDeviceReplyMap()
* 5. Performs FDIR check for failures
* 6. Calls hkSwitcher.performOperation()
* 7. If the device mode is MODE_OFF, return RETURN_OK.
* Otherwise, perform the Action property and performs depending
* on value specified by input value counter (incremented in PST).
* The child class tells base class what to do by setting this value.
* - SEND_WRITE: Send data or commands to device by calling
* doSendWrite() which calls sendMessage function
* of #communicationInterface
* and calls buildInternalCommand if the cookie state is COOKIE_UNUSED
* - GET_WRITE: Get ackknowledgement for sending by calling doGetWrite()
* which calls getSendSuccess of #communicationInterface.
* Calls abstract functions scanForReply() and interpretDeviceReply().
* - SEND_READ: Request reading data from device by calling doSendRead()
* which calls requestReceiveMessage of #communcationInterface
* - GET_READ: Access requested reading data by calling doGetRead()
* which calls readReceivedMessage of #communicationInterface
* @param counter Specifies which Action to perform
* @return RETURN_OK for successful execution
*/
virtual ReturnValue_t performOperation(uint8_t counter);
/**
* @brief Initializes the device handler
* @details
* Initialize Device Handler as system object and
* initializes all important helper classes.
* Calls fillCommandAndReplyMap().
* @return
*/
virtual ReturnValue_t initialize();
/**
* Destructor.
*/
virtual ~DeviceHandlerBase();
protected:
/**
* @brief This is used to let the child class handle the transition from
* mode @c _MODE_START_UP to @c MODE_ON
* @details
* It is only called when the device handler is in mode @c _MODE_START_UP.
* That means, the device switch(es) are already set to on.
* Device handler commands are read and can be handled by the child class.
* If the child class handles a command, it should also send
* an reply accordingly.
* If an Command is not handled (ie #DeviceHandlerCommand is not @c CMD_NONE,
* the base class handles rejecting the command and sends a reply.
* The replies for mode transitions are handled by the base class.
*
* - If the device is started and ready for operation, the mode should be
* set to MODE_ON. It is possible to set the mode to _MODE_TO_ON to
* use the to on transition if available.
* - If the power-up fails, the mode should be set to _MODE_POWER_DOWN
* which will lead to the device being powered off.
* - If the device does not change the mode, the mode will be changed
* to _MODE_POWER_DOWN, after the timeout (from getTransitionDelay())
* has passed.
*
* #transitionFailure can be set to a failure code indicating the reason
* for a failed transition
*/
virtual void doStartUp() = 0;
/**
* @brief This is used to let the child class handle the transition
* from mode @c _MODE_SHUT_DOWN to @c _MODE_POWER_DOWN
* @details
* It is only called when the device handler is in mode @c _MODE_SHUT_DOWN.
* Device handler commands are read and can be handled by the child class.
* If the child class handles a command, it should also send an reply
* accordingly.
* If an Command is not handled (ie #DeviceHandlerCommand is not
* @c CMD_NONE, the base class handles rejecting the command and sends a
* reply. The replies for mode transitions are handled by the base class.
*
* - If the device ready to be switched off,
* the mode should be set to _MODE_POWER_DOWN.
* - If the device should not be switched off, the mode can be changed to
* _MODE_TO_ON (or MODE_ON if no transition is needed).
* - If the device does not change the mode, the mode will be changed to
* _MODE_POWER_DOWN, when the timeout (from getTransitionDelay())
* has passed.
*
* #transitionFailure can be set to a failure code indicating the reason
* for a failed transition
*/
virtual void doShutDown() = 0;
/**
* Build the device command to send for normal mode.
*
* This is only called in @c MODE_NORMAL. If multiple submodes for
* @c MODE_NORMAL are supported, different commands can built,
* depending on the submode.
*
* #rawPacket and #rawPacketLen must be set by this method to the
* packet to be sent. If variable command frequence is required, a counter
* can be used and the frequency in the reply map has to be set manually
* by calling updateReplyMap().
*
* @param[out] id the device command id that has been built
* @return
* - @c RETURN_OK to send command after setting #rawPacket and #rawPacketLen.
* - @c NOTHING_TO_SEND when no command is to be sent.
* - Anything else triggers an even with the returnvalue as a parameter.
*/
virtual ReturnValue_t buildNormalDeviceCommand(DeviceCommandId_t * id) = 0;
/**
* Build the device command to send for a transitional mode.
*
* This is only called in @c _MODE_TO_NORMAL, @c _MODE_TO_ON, @c _MODE_TO_RAW,
* @c _MODE_START_UP and @c _MODE_TO_POWER_DOWN. So it is used by doStartUp()
* and doShutDown() as well as doTransition()
*
* A good idea is to implement a flag indicating a command has to be built
* and a variable containing the command number to be built
* and filling them in doStartUp(), doShutDown() and doTransition() so no
* modes have to be checked here.
*
* #rawPacket and #rawPacketLen must be set by this method to the packet to be sent.
*
* @param[out] id the device command id built
* @return
* - @c RETURN_OK when a command is to be sent
* - @c NOTHING_TO_SEND when no command is to be sent
* - Anything else triggers an even with the returnvalue as a parameter
*/
virtual ReturnValue_t buildTransitionDeviceCommand(DeviceCommandId_t * id) = 0;
/**
* @brief Build a device command packet from data supplied by a direct command.
*
* @details
* #rawPacket and #rawPacketLen should be set by this method to the packet to be sent.
* The existence of the command in the command map and the command size check
* against 0 are done by the base class.
*
* @param deviceCommand the command to build, already checked against deviceCommandMap
* @param commandData pointer to the data from the direct command
* @param commandDataLen length of commandData
* @return
* - @c RETURN_OK to send command after #rawPacket and #rawPacketLen have been set.
* - Anything else triggers an event with the returnvalue as a parameter
*/
virtual ReturnValue_t buildCommandFromCommand(DeviceCommandId_t deviceCommand,
const uint8_t * commandData, size_t commandDataLen) = 0;
/**
* @brief Scans a buffer for a valid reply.
* @details
* This is used by the base class to check the data received for valid packets.
* It only checks if a valid packet starts at @c start.
* It also only checks the structural validy of the packet,
* e.g. checksums lengths and protocol data. No information check is done,
* e.g. range checks etc.
*
* Errors should be reported directly, the base class does NOT report any
* errors based on the return value of this function.
*
* @param start start of remaining buffer to be scanned
* @param len length of remaining buffer to be scanned
* @param[out] foundId the id of the data found in the buffer.
* @param[out] foundLen length of the data found. Is to be set in function,
* buffer is scanned at previous position + foundLen.
* @return
* - @c RETURN_OK a valid packet was found at @c start, @c foundLen is valid
* - @c RETURN_FAILED no reply could be found starting at @c start,
* implies @c foundLen is not valid, base class will call scanForReply()
* again with ++start
* - @c DeviceHandlerIF::INVALID_DATA a packet was found but it is invalid,
* e.g. checksum error, implies @c foundLen is valid, can be used to
* skip some bytes
* - @c DeviceHandlerIF::LENGTH_MISSMATCH @c len is invalid
* - @c DeviceHandlerIF::IGNORE_REPLY_DATA Ignore this specific part of
* the packet
* - @c DeviceHandlerIF::IGNORE_FULL_PACKET Ignore the packet
* - @c APERIODIC_REPLY if a valid reply is received that has not been
* requested by a command, but should be handled anyway
* (@see also fillCommandAndCookieMap() )
*/
2020-05-07 23:38:28 +02:00
virtual ReturnValue_t scanForReply(const uint8_t *start, size_t len,
DeviceCommandId_t *foundId, size_t *foundLen) = 0;
/**
* @brief Interpret a reply from the device.
* @details
* This is called after scanForReply() found a valid packet, it can be
* assumed that the length and structure is valid.
* This routine extracts the data from the packet into a DataSet and then
* calls handleDeviceTM(), which either sends a TM packet or stores the
* data in the DataPool depending on whether it was an external command.
* No packet length is given, as it should be defined implicitly by the id.
*
* @param id the id found by scanForReply()
* @param packet
* @return
* - @c RETURN_OK when the reply was interpreted.
* - @c RETURN_FAILED when the reply could not be interpreted,
* e.g. logical errors or range violations occurred
*/
virtual ReturnValue_t interpretDeviceReply(DeviceCommandId_t id,
const uint8_t *packet) = 0;
/**
* @brief fill the #deviceCommandMap
* called by the initialize() of the base class
* @details
* This is used to let the base class know which replies are expected.
* There are different scenarios regarding this:
*
* - "Normal" commands. These are commands, that trigger a direct reply
* from the device. In this case, the id of the command should be added
* to the command map with a commandData_t where maxDelayCycles is set
* to the maximum expected number of PST cycles the reply will take.
* Then, scanForReply returns the id of the command and the base class
* can handle time-out and missing replies.
*
* - Periodic, unrequested replies. These are replies that, once enabled,
* are sent by the device on its own in a defined interval.
* In this case, the id of the reply or a placeholder id should be added
* to the deviceCommandMap with a commandData_t where maxDelayCycles is
* set to the maximum expected number of PST cycles between two replies
* (also a tolerance should be added, as an FDIR message will be
* generated if it is missed).
*
* (Robin) This part confuses me. "must do as soon as" implies that
* the developer must do something somewhere else in the code. Is
* that really the case? If I understood correctly, DHB performs
* almost everything (e.g. in erirm function) as long as the commands
* are inserted correctly.
*
* As soon as the replies are enabled, DeviceCommandInfo.periodic must
* be set to true, DeviceCommandInfo.delayCycles to
* DeviceCommandInfo.maxDelayCycles.
* From then on, the base class handles the reception.
* Then, scanForReply returns the id of the reply or the placeholder id
* and the base class will take care of checking that all replies are
* received and the interval is correct.
* When the replies are disabled, DeviceCommandInfo.periodic must be set
* to 0, DeviceCommandInfo.delayCycles to 0;
*
* - Aperiodic, unrequested replies. These are replies that are sent
* by the device without any preceding command and not in a defined
* interval. These are not entered in the deviceCommandMap but
* handled by returning @c APERIODIC_REPLY in scanForReply().
*/
virtual void fillCommandAndReplyMap() = 0;
/**
* This is a helper method to facilitate inserting entries in the command map.
* @param deviceCommand Identifier of the command to add.
* @param maxDelayCycles The maximum number of delay cycles the command
* waits until it times out.
* @param periodic Indicates if the command is periodic (i.e. it is sent
* by the device repeatedly without request) or not. Default is aperiodic (0)
* @return - @c RETURN_OK when the command was successfully inserted,
* - @c RETURN_FAILED else.
*/
ReturnValue_t insertInCommandAndReplyMap(DeviceCommandId_t deviceCommand,
uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0,
bool hasDifferentReplyId = false, DeviceCommandId_t replyId = 0);
/**
* @brief This is a helper method to insert replies in the reply map.
* @param deviceCommand Identifier of the reply to add.
* @param maxDelayCycles The maximum number of delay cycles the reply waits
* until it times out.
* @param periodic Indicates if the command is periodic (i.e. it is sent
* by the device repeatedly without request) or not. Default is aperiodic (0)
* @return - @c RETURN_OK when the command was successfully inserted,
* - @c RETURN_FAILED else.
*/
ReturnValue_t insertInReplyMap(DeviceCommandId_t deviceCommand,
uint16_t maxDelayCycles, size_t replyLen = 0, uint8_t periodic = 0);
/**
* @brief A simple command to add a command to the commandList.
* @param deviceCommand The command to add
* @return - @c RETURN_OK when the command was successfully inserted,
* - @c RETURN_FAILED else.
*/
ReturnValue_t insertInCommandMap(DeviceCommandId_t deviceCommand);
/**
* @brief This is a helper method to facilitate updating entries
* in the reply map.
* @param deviceCommand Identifier of the reply to update.
* @param delayCycles The current number of delay cycles to wait.
* As stated in #fillCommandAndCookieMap, to disable periodic commands,
* this is set to zero.
* @param maxDelayCycles The maximum number of delay cycles the reply waits
* until it times out. By passing 0 the entry remains untouched.
* @param periodic Indicates if the command is periodic (i.e. it is sent
* by the device repeatedly without request) or not.Default is aperiodic (0).
* Warning: The setting always overrides the value that was entered in the map.
* @return - @c RETURN_OK when the command was successfully inserted,
* - @c RETURN_FAILED else.
*/
ReturnValue_t updateReplyMapEntry(DeviceCommandId_t deviceReply,
uint16_t delayCycles, uint16_t maxDelayCycles,
uint8_t periodic = 0);
/**
* @brief Can be implemented by child handler to
* perform debugging
* @details Example: Calling this in performOperation
* to track values like mode.
* @param positionTracker Provide the child handler a way to know
* where the debugInterface was called
* @param objectId Provide the child handler object Id to
* specify actions for spefic devices
* @param parameter Supply a parameter of interest
* Please delete all debugInterface calls in DHB after debugging is finished !
*/
virtual void debugInterface(uint8_t positionTracker = 0,
object_id_t objectId = 0, uint32_t parameter = 0);
/**
* Get the time needed to transit from modeFrom to modeTo.
*
* Used for the following transitions:
* modeFrom -> modeTo:
* MODE_ON -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN]
* MODE_NORMAL -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN]
* MODE_RAW -> [MODE_ON, MODE_NORMAL, MODE_RAW, _MODE_POWER_DOWN]
* _MODE_START_UP -> MODE_ON (do not include time to set the switches,
* the base class got you covered)
*
* The default implementation returns 0 !
* @param modeFrom
* @param modeTo
* @return time in ms
*/
virtual uint32_t getTransitionDelayMs(Mode_t modeFrom, Mode_t modeTo);
/**
* Return the switches connected to the device.
*
* The default implementation returns one switch set in the ctor.
*
* @param[out] switches pointer to an array of switches
* @param[out] numberOfSwitches length of returned array
* @return
* - @c RETURN_OK if the parameters were set
* - @c RETURN_FAILED if no switches exist
*/
virtual ReturnValue_t getSwitches(const uint8_t **switches,
uint8_t *numberOfSwitches);
2020-04-19 22:17:14 +02:00
/**
* @brief Hook function for child handlers which is called once per
* performOperation(). Default implementation is empty.
*/
virtual void performOperationHook();
public:
/**
* @param parentQueueId
*/
virtual void setParentQueue(MessageQueueId_t parentQueueId);
ReturnValue_t executeAction(ActionId_t actionId,
MessageQueueId_t commandedBy, const uint8_t* data, uint32_t size);
Mode_t getTransitionSourceMode() const;
Submode_t getTransitionSourceSubMode() const;
virtual void getMode(Mode_t *mode, Submode_t *submode);
HealthState getHealth();
ReturnValue_t setHealth(HealthState health);
virtual ReturnValue_t getParameter(uint8_t domainId, uint16_t parameterId,
ParameterWrapper *parameterWrapper,
const ParameterWrapper *newValues, uint16_t startAtIndex);
2018-07-13 18:28:26 +02:00
/**
* Implementation of ExecutableObjectIF function
*
* Used to setup the reference of the task, that executes this component
* @param task_ Pointer to the taskIF of this task
*/
virtual void setTaskIF(PeriodicTaskIF* task_);
virtual MessageQueueId_t getCommandQueue(void) const;
protected:
/**
* The Returnvalues id of this class, required by HasReturnvaluesIF
*/
static const uint8_t INTERFACE_ID = CLASS_ID::DEVICE_HANDLER_BASE;
/**
* These returnvalues can be returned from abstract functions
* to alter the behaviour of DHB.For error values, refer to
* DeviceHandlerIF.h returnvalues.
*/
static const ReturnValue_t INVALID_CHANNEL = MAKE_RETURN_CODE(4);
// Returnvalues for scanForReply()
static const ReturnValue_t APERIODIC_REPLY = MAKE_RETURN_CODE(5); //!< This is used to specify for replies from a device which are not replies to requests
static const ReturnValue_t IGNORE_REPLY_DATA = MAKE_RETURN_CODE(6); //!< Ignore parts of the received packet
static const ReturnValue_t IGNORE_FULL_PACKET = MAKE_RETURN_CODE(7); //!< Ignore full received packet
// static const ReturnValue_t ONE_SWITCH = MAKE_RETURN_CODE(8);
// static const ReturnValue_t TWO_SWITCHES = MAKE_RETURN_CODE(9);
static const ReturnValue_t NO_SWITCH = MAKE_RETURN_CODE(10);
static const ReturnValue_t COMMAND_MAP_ERROR = MAKE_RETURN_CODE(11);
static const ReturnValue_t NOTHING_TO_SEND = MAKE_RETURN_CODE(12);
//Mode handling error Codes
static const ReturnValue_t CHILD_TIMEOUT = MAKE_RETURN_CODE(0xE1);
static const ReturnValue_t SWITCH_FAILED = MAKE_RETURN_CODE(0xE2);
static const DeviceCommandId_t RAW_COMMAND_ID = -1;
static const DeviceCommandId_t NO_COMMAND_ID = -2;
static const MessageQueueId_t NO_COMMANDER = 0;
/**
* Pointer to the raw packet that will be sent.
*/
uint8_t *rawPacket = nullptr;
/**
* Size of the #rawPacket.
*/
uint32_t rawPacketLen = 0;
/**
* The mode the device handler is currently in.
*
* This should never be changed directly but only with setMode()
*/
Mode_t mode;
/**
* The submode the device handler is currently in.
*
* This should never be changed directly but only with setMode()
*/
Submode_t submode;
/**
* This is the counter value from performOperation().
*/
uint8_t pstStep = 0;
/**
* wiretapping flag:
*
* indicates either that all raw messages to and from the device should be sent to #theOneWhoWantsToReadRawTraffic
* or that all device TM should be downlinked to #theOneWhoWantsToReadRawTraffic
*/
enum WiretappingMode {
OFF = 0, RAW = 1, TM = 2
} wiretappingMode;
/**
* A message queue that accepts raw replies
*
* Statically initialized in initialize() to a configurable object. Used when there is no method
* of finding a recipient, ie raw mode and reporting erreonous replies
*/
MessageQueueId_t defaultRawReceiver = 0;
store_address_t storedRawData;
/**
* the message queue which wants to read all raw traffic
*
* if #isWiretappingActive all raw communication from and to the device will be sent to this queue
*/
MessageQueueId_t requestedRawTraffic = 0;
/**
* the object used to set power switches
*/
PowerSwitchIF *powerSwitcher = nullptr;
/**
* Pointer to the IPCStore.
*
* This caches the pointer received from the objectManager in the constructor.
*/
StorageManagerIF *IPCStore = nullptr;
/**
* cached for init
*/
object_id_t deviceCommunicationId;
/**
* Communication object used for device communication
*/
DeviceCommunicationIF *communicationInterface = nullptr;
/**
* Cookie used for communication
*/
CookieIF * comCookie = nullptr;
struct DeviceCommandInfo {
bool isExecuting; //!< Indicates if the command is already executing.
uint8_t expectedReplies; //!< Dynamic value to indicate how many replies are expected. Inititated with 0.
MessageQueueId_t sendReplyTo; //!< if this is != NO_COMMANDER, DHB was commanded externally and shall report everything to commander.
};
using DeviceCommandMap = std::map<DeviceCommandId_t, DeviceCommandInfo> ;
/**
* @brief Information about expected replies
*
* This is used to keep track of pending replies
*/
struct DeviceReplyInfo {
uint16_t maxDelayCycles; //!< The maximum number of cycles the handler should wait for a reply to this command.
uint16_t delayCycles; //!< The currently remaining cycles the handler should wait for a reply, 0 means there is no reply expected
size_t replyLen = 0; //!< Expected size of the reply.
uint8_t periodic; //!< if this is !=0, the delayCycles will not be reset to 0 but to maxDelayCycles
DeviceCommandMap::iterator command; //!< The command that expects this reply.
};
using DeviceReplyMap = std::map<DeviceCommandId_t, DeviceReplyInfo> ;
using DeviceReplyIter = DeviceReplyMap::iterator;
/**
* The MessageQueue used to receive device handler commands and to send replies.
*/
MessageQueueIF* commandQueue = nullptr;
/**
* this is the datapool variable with the thermal state of the device
*
* can be set to PoolVariableIF::NO_PARAMETER to deactivate thermal checking
*/
uint32_t deviceThermalStatePoolId;
/**
* this is the datapool variable with the thermal request of the device
*
* can be set to PoolVariableIF::NO_PARAMETER to deactivate thermal checking
*/
uint32_t deviceThermalRequestPoolId;
/**
* Taking care of the health
*/
HealthHelper healthHelper;
ModeHelper modeHelper;
ParameterHelper parameterHelper;
/**
* Optional Error code
* Can be set in doStartUp(), doShutDown() and doTransition() to signal cause for Transition failure.
*/
ReturnValue_t childTransitionFailure;
uint32_t ignoreMissedRepliesCount = 0; //!< Counts if communication channel lost a reply, so some missed replys can be ignored.
FailureIsolationBase* fdirInstance; //!< Pointer to the used FDIR instance. If not provided by child, default class is instantiated.
HkSwitchHelper hkSwitcher;
bool defaultFDIRUsed; //!< To correctly delete the default instance.
bool switchOffWasReported; //!< Indicates if SWITCH_WENT_OFF was already thrown.
PeriodicTaskIF* executingTask = nullptr;//!< Pointer to the task which executes this component, is invalid before setTaskIF was called.
2018-07-13 18:28:26 +02:00
static object_id_t powerSwitcherId; //!< Object which switches power on and off.
static object_id_t rawDataReceiverId; //!< Object which receives RAW data by default.
static object_id_t defaultFDIRParentId; //!< Object which may be the root cause of an identified fault.
/**
* Helper function to report a missed reply
*
* Can be overwritten by children to act on missed replies or to fake reporting Id.
*
* @param id of the missed reply
*/
virtual void missedReply(DeviceCommandId_t id);
/**
* Send a reply to a received device handler command.
*
* This also resets #DeviceHandlerCommand to 0.
*
* @param reply the reply type
* @param parameter parameter for the reply
*/
void replyReturnvalueToCommand(ReturnValue_t status,
uint32_t parameter = 0);
void replyToCommand(ReturnValue_t status, uint32_t parameter = 0);
/**
* Set the device handler mode
*
* Sets #timeoutStart with every call.
*
* Sets #transitionTargetMode if necessary so transitional states can be
* entered from everywhere without breaking the state machine
* (which relies on a correct #transitionTargetMode).
*
* The submode is left unchanged.
*
*
* @param newMode
*/
void setMode(Mode_t newMode);
/**
* @overload
* @param submode
*/
void setMode(Mode_t newMode, Submode_t submode);
/**
* Do the transition to the main modes (MODE_ON, MODE_NORMAL and MODE_RAW).
*
* If the transition is complete, the mode should be set to the target mode, which can be deduced from the current mode which is
* [_MODE_TO_ON, _MODE_TO_NORMAL, _MODE_TO_RAW]
*
* The intended target submode is already set. The origin submode can be read in subModeFrom.
*
* If the transition can not be completed, the child class can try to reach an working mode by setting the mode either directly
* or setting the mode to an transitional mode (TO_ON, TO_NORMAL, TO_RAW) if the device needs to be reconfigured.
*
* If nothing works, the child class can wait for the timeout and the base class will reset the mode to the mode where the transition
* originated from (the child should report the reason for the failed transition).
*
* The intended way to send commands is to set a flag (enum) indicating which command is to be sent here
* and then to check in buildTransitionCommand() for the flag. This flag can also be used by doStartUp() and
* doShutDown() to get a nice and clean implementation of buildTransitionCommand() without switching through modes.
*
* When the the condition for the completion of the transition is met, the mode can be set, for example in the parseReply() function.
*
* The default implementation goes into the target mode;
*
* #transitionFailure can be set to a failure code indicating the reason for a failed transition
*
* @param modeFrom the mode the transition originated from: [MODE_ON, MODE_NORMAL, MODE_RAW and _MODE_POWER_DOWN (if the mode changed from _MODE_START_UP to _MODE_TO_ON)]
* @param subModeFrom the subMode of modeFrom
*/
virtual void doTransition(Mode_t modeFrom, Submode_t subModeFrom);
/**
* Is the combination of mode and submode valid?
*
* @param mode
* @param submode
* @return
* - @c RETURN_OK if valid
* - @c RETURN_FAILED if invalid
*/
virtual ReturnValue_t isModeCombinationValid(Mode_t mode,
Submode_t submode);
/**
* Get the Rmap action for the current step.
*
* The step number can be read from #pstStep.
*
* @return The Rmap action to execute in this step
*/
2020-03-23 18:05:39 +01:00
virtual CommunicationAction_t getComAction();
/**
* Build the device command to send for raw mode.
*
* This is only called in @c MODE_RAW. It is for the rare case that in raw mode packets
* are to be sent by the handler itself. It is NOT needed for the raw commanding service.
* Its only current use is in the STR handler which gets its raw packets from a different
* source.
* Also it can be used for transitional commands, to get the device ready for @c MODE_RAW
*
* As it is almost never used, there is a default implementation returning @c NOTHING_TO_SEND.
*
* #rawPacket and #rawPacketLen must be set by this method to the packet to be sent.
*
* @param[out] id the device command id built
* @return
* - @c RETURN_OK when a command is to be sent
* - not @c NOTHING_TO_SEND when no command is to be sent
*/
virtual ReturnValue_t buildChildRawCommand();
/**
* Returns the delay cycle count of a reply.
* A count != 0 indicates that the command is already executed.
* @param deviceCommand The command to look for
* @return The current delay count. If the command does not exist (should never happen) it returns 0.
*/
uint8_t getReplyDelayCycles(DeviceCommandId_t deviceCommand);
/**
* Construct a command reply containing a raw reply.
*
* It gets space in the #IPCStore, copies data there, then sends a raw reply
* containing the store address.
*
* This method is virtual, as the STR has a different channel to send raw replies
* and overwrites it accordingly.
*
* @param data data to send
* @param len length of @c data
* @param sendTo the messageQueueId of the one to send to
* @param isCommand marks the raw data as a command, the message then will be of type raw_command
*/
virtual void replyRawData(const uint8_t *data, size_t len,
MessageQueueId_t sendTo, bool isCommand = false);
/**
* Calls replyRawData() with #defaultRawReceiver, but checks if wiretapping is active and if so,
* does not send the Data as the wiretapping will have sent it already
*/
void replyRawReplyIfnotWiretapped(const uint8_t *data, size_t len);
/**
* notify child about mode change
*/
virtual void modeChanged(void);
/**
* Enable the reply checking for a command
*
* Is only called, if the command was sent (ie the getWriteReply was successful).
* Must ensure that all replies are activated and correctly linked to the command that initiated it.
* The default implementation looks for a reply with the same id as the command id in the replyMap or
* uses the alternativeReplyId if flagged so.
* When found, copies maxDelayCycles to delayCycles in the reply information and sets the command to
* expect one reply.
*
* Can be overwritten by the child, if a command activates multiple replies
* or replyId differs from commandId.
* Notes for child implementations:
* - If the command was not found in the reply map, NO_REPLY_EXPECTED MUST be returned.
* - A failure code may be returned if something went fundamentally wrong.
*
* @param deviceCommand
* @return - RETURN_OK if a reply was activated.
* - NO_REPLY_EXPECTED if there was no reply found. This is not an
* error case as many commands do not expect a reply.
*/
virtual ReturnValue_t enableReplyInReplyMap(DeviceCommandMap::iterator cmd,
uint8_t expectedReplies = 1, bool useAlternateId = false,
DeviceCommandId_t alternateReplyID = 0);
/**
* get the state of the PCDU switches in the datapool
*
* @return
* - @c PowerSwitchIF::SWITCH_ON if all switches specified by #switches are on
* - @c PowerSwitchIF::SWITCH_OFF one of the switches specified by #switches are off
* - @c PowerSwitchIF::RETURN_FAILED if an error occured
*/
ReturnValue_t getStateOfSwitches(void);
/**
* set all datapool variables that are update periodically in normal mode invalid
*
* Child classes should provide an implementation which sets all those variables invalid
* which are set periodically during any normal mode.
*/
virtual void setNormalDatapoolEntriesInvalid() = 0;
/**
* build a list of sids and pass it to the #hkSwitcher
*/
virtual void changeHK(Mode_t mode, Submode_t submode, bool enable);
/**
* Children can overwrite this function to suppress checking of the command Queue
*
* This can be used when the child does not want to receive a command in a certain
* situation. Care must be taken that checking is not permanentely disabled as this
* would render the handler unusable.
*
* @return whether checking the queue should NOT be done
*/
virtual bool dontCheckQueue();
Mode_t getBaseMode(Mode_t transitionMode);
bool isAwaitingReply();
void handleDeviceTM(SerializeIF *dataSet, DeviceCommandId_t commandId,
bool neverInDataPool = false, bool forceDirectTm = false);
virtual ReturnValue_t checkModeCommand(Mode_t mode, Submode_t submode,
uint32_t *msToReachTheMode);
virtual void startTransition(Mode_t mode, Submode_t submode);
virtual void setToExternalControl();
virtual void announceMode(bool recursive);
virtual ReturnValue_t letChildHandleMessage(CommandMessage *message);
/**
* Overwrites SystemObject::triggerEvent in order to inform FDIR"Helper" faster about executed events.
* This is a bit sneaky, but improves responsiveness of the device FDIR.
* @param event The event to be thrown
* @param parameter1 Optional parameter 1
* @param parameter2 Optional parameter 2
*/
void triggerEvent(Event event, uint32_t parameter1 = 0,
uint32_t parameter2 = 0);
/**
* Same as triggerEvent, but for forwarding if object is used as proxy.
*/
virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
uint32_t parameter2 = 0) const;
/**
* Checks state of switches in conjunction with mode and triggers an event if they don't fit.
*/
virtual void checkSwitchState();
/**
* Reserved for the rare case where a device needs to perform additional operation cyclically in OFF mode.
*/
virtual void doOffActivity();
/**
* Reserved for the rare case where a device needs to perform additional operation cyclically in ON mode.
*/
virtual void doOnActivity();
/**
* Checks if current mode is transitional mode.
* @return true if mode is transitional, false else.
*/
bool isTransitionalMode();
/**
* Checks if current handler state allows reception of external device commands.
* Default implementation allows commands only in plain MODE_ON and MODE_NORMAL.
* @return RETURN_OK if commands are accepted, anything else otherwise.
*/
virtual ReturnValue_t acceptExternalDeviceCommands();
bool commandIsExecuting(DeviceCommandId_t commandId);
/**
* This map is used to check and track correct reception of all replies.
*
* It has multiple use:
* - it stores the information on pending replies. If a command is sent, the DeviceCommandInfo.count is incremented.
* - it is used to time-out missing replies. If a command is sent, the DeviceCommandInfo.DelayCycles is set to MaxDelayCycles.
* - it is queried to check if a reply from the device can be interpreted. scanForReply() returns the id of the command a reply was found for.
* The reply is ignored in the following cases:
* - No entry for the returned id was found
* - The deviceReplyInfo.delayCycles is == 0
*/
DeviceReplyMap deviceReplyMap;
/**
* Information about commands
*/
DeviceCommandMap deviceCommandMap;
ActionHelper actionHelper;
private:
/**
* State a cookie is in.
*
* Used to keep track of the state of the RMAP communication.
*/
enum CookieState_t {
COOKIE_UNUSED, //!< The Cookie is unused
COOKIE_WRITE_READY, //!< There's data available to send.
COOKIE_READ_SENT, //!< A sendRead command was sent with this cookie
COOKIE_WRITE_SENT //!< A sendWrite command was sent with this cookie
};
/**
* Information about a cookie.
*
* This is stored in a map for each cookie, to not only track the state, but also information
* about the sent command. Tracking this information is needed as
* the state of a commandId (waiting for reply) is done when a RMAP write reply is received.
*/
struct CookieInfo {
CookieState_t state;
DeviceCommandMap::iterator pendingCommand;
};
/**
* Info about the #cookie
*
* Used to track the state of the communication
*/
CookieInfo cookieInfo;
/**
* Used for timing out mode transitions.
*
* Set when setMode() is called.
*/
uint32_t timeoutStart = 0;
/**
* Delay for the current mode transition, used for time out
*/
uint32_t childTransitionDelay;
/**
* The mode the current transition originated from
*
* This is private so the child can not change it and fuck up the timeouts
*
* IMPORTANT: This is not valid during _MODE_SHUT_DOWN and _MODE_START_UP!! (it is _MODE_POWER_DOWN during this modes)
*
* is element of [MODE_ON, MODE_NORMAL, MODE_RAW]
*/
Mode_t transitionSourceMode;
/**
* the submode of the source mode during a transition
*/
Submode_t transitionSourceSubMode;
/**
* the switch of the device
*
* for devices using two switches override getSwitches()
*/
const uint8_t deviceSwitch;
/**
* read the command queue
*/
void readCommandQueue(void);
/**
* Handle the device handler mode.
*
* - checks whether commands are valid for the current mode, rejects them accordingly
* - checks whether commanded mode transitions are required and calls handleCommandedModeTransition()
* - does the necessary action for the current mode or calls doChildStateMachine in modes @c MODE_TO_ON and @c MODE_TO_OFF
* - actions that happen in transitions (eg setting a timeout) are handled in setMode()
*/
void doStateMachine(void);
void buildRawDeviceCommand(CommandMessage* message);
void buildInternalCommand(void);
// /**
// * Send a reply with the current mode and submode.
// */
// void announceMode(void);
/**
* Decrement the counter for the timout of replies.
*
* This is called at the beginning of each cycle. It checks whether a reply has timed out (that means a reply was expected
* but not received).
*/
void decrementDeviceReplyMap(void);
/**
* Convenience function to handle a reply.
*
* Called after scanForReply() has found a packet. Checks if the found id is in the #deviceCommandMap, if so,
* calls interpretDeviceReply(DeviceCommandId_t id, const uint8_t *packet) for further action.
*
* It also resets the timeout counter for the command id.
*
* @param data the found packet
* @param id the found id
* @foundLen the length of the packet
*/
void handleReply(const uint8_t *data, DeviceCommandId_t id, uint32_t foundLen);
void replyToReply(DeviceReplyMap::iterator iter, ReturnValue_t status);
/**
* Build and send a command to the device.
*
* This routine checks whether a raw or direct command has been received, checks the content of the received command and
* calls buildCommandFromCommand() for direct commands or sets #rawpacket to the received raw packet.
* If no external command is received or the received command is invalid and the current mode is @c MODE_NORMAL or a transitional mode,
* it asks the child class to build a command (via getNormalDeviceCommand() or getTransitionalDeviceCommand() and buildCommand()) and
* sends the command via RMAP.
*/
void doSendWrite(void);
/**
* Check if the RMAP sendWrite action was successful.
*
* Depending on the result, the following is done
* - if the device command was external commanded, a reply is sent indicating the result
* - if the action was successful, the reply timout counter is initialized
*/
void doGetWrite(void);
/**
* Send a RMAP getRead command.
*
* The size of the getRead command is #maxDeviceReplyLen.
* This is always executed, independently from the current mode.
*/
void doSendRead(void);
/**
* Check the getRead reply and the contained data.
*
* If data was received scanForReply() and, if successful, handleReply() are called.
* If the current mode is @c MODE_RAW, the received packet is sent to the commanding object
* via commandQueue.
*/
void doGetRead(void);
/**
* Retrive data from the #IPCStore.
*
* @param storageAddress
* @param[out] data
* @param[out] len
* @return
* - @c RETURN_OK @c data is valid
* - @c RETURN_FAILED IPCStore is NULL
* - the return value from the IPCStore if it was not @c RETURN_OK
*/
ReturnValue_t getStorageData(store_address_t storageAddress, uint8_t **data,
uint32_t *len);
/**
* set all switches returned by getSwitches()
*
* @param onOff on == @c SWITCH_ON; off != @c SWITCH_ON
*/
void commandSwitch(ReturnValue_t onOff);
/**
* @param modeTo either @c MODE_ON, MODE_NORMAL or MODE_RAW NOTHING ELSE!!!
*/
void setTransition(Mode_t modeTo, Submode_t submodeTo);
/**
* calls the right child function for the transitional submodes
*/
void callChildStatemachine();
/**
* Switches the channel of the cookie used for the communication
*
*
* @param newChannel the object Id of the channel to switch to
* @return
* - @c RETURN_OK when cookie was changed
* - @c RETURN_FAILED when cookies could not be changed, eg because the newChannel is not enabled
* - @c returnvalues of RMAPChannelIF::isActive()
*/
ReturnValue_t switchCookieChannel(object_id_t newChannelId);
ReturnValue_t handleDeviceHandlerMessage(CommandMessage *message);
};
#endif /* DEVICEHANDLERBASE_H_ */