applied clang format

hal/src/fsfw_hal/linux/uio/UioMapper.cpp

@@ -70,7 +70,7 @@ ReturnValue_t UioMapper::getMapSize(size_t* size) {
   }
   uint32_t sizeTmp = 0;
   items = sscanf(hexstring, "%x", &sizeTmp);
-  if(size != nullptr) {
+  if (size != nullptr) {
     *size = sizeTmp;
   }
   if (items != 1) {

src/fsfw/datalinklayer/DataLinkLayer.h

@@ -30,7 +30,7 @@ class DataLinkLayer : public CCSDSReturnValuesIF {
   //! [EXPORT] : [COMMENT] A previously found Bit Lock signal was lost. P1: raw BLO state, P2: 0
   static const Event BIT_LOCK_LOST = MAKE_EVENT(3, severity::INFO);
   //	static const Event RF_CHAIN_LOST = MAKE_EVENT(4, severity::INFO); //!< The CCSDS Board
-  //detected that either bit lock or RF available or both are lost. No parameters.
+  // detected that either bit lock or RF available or both are lost. No parameters.
   //! [EXPORT] : [COMMENT] The CCSDS Board could not interpret a TC
   static const Event FRAME_PROCESSING_FAILED = MAKE_EVENT(5, severity::LOW);
   /**

src/fsfw/datalinklayer/VirtualChannelReception.cpp

@@ -30,9 +30,9 @@ ReturnValue_t VirtualChannelReception::mapDemultiplexing(TcTransferFrame* frame)
   mapChannelIterator iter = mapChannels.find(mapId);
   if (iter == mapChannels.end()) {
     //		error << "VirtualChannelReception::mapDemultiplexing on VC " << std::hex << (int)
-    //channelId
+    // channelId
     //				<< ": MapChannel " << (int) mapId << std::dec << " not found." <<
-    //std::endl;
+    // std::endl;
     return VC_NOT_FOUND;
   } else {
     return (iter->second)->extractPackets(frame);

src/fsfw/globalfunctions/CRC.cpp

@@ -116,8 +116,8 @@ uint16_t CRC::crc16ccitt(uint8_t const input[], uint32_t length, uint16_t starti
   //	for (int i=0; i<16 ;i++)
   //	{
   //		 if  (xor_out[i] == true)
-  //			 crc_value = crc_value + pow(2,(15 -i));   // reverse CrC result before Final
+  //			 crc_value = crc_value + pow(2,(15 -i));   // reverse CrC result before
-  //XOR
+  //Final XOR
   //	}
   //
   //	crc_value = 0;// for debug mode

src/fsfw/modes/ModeMessage.h

@@ -14,30 +14,30 @@ class ModeMessage {
   static const uint8_t MESSAGE_ID = messagetypes::MODE_COMMAND;
   static const Command_t CMD_MODE_COMMAND =
       MAKE_COMMAND_ID(0x01);  //!> Command to set the specified Mode, replies are: REPLY_MODE_REPLY,
-                              //!REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any replies,
+                              //! REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any replies,
-                              //!as this will break the subsystem mode machine!!
+                              //! as this will break the subsystem mode machine!!
   static const Command_t CMD_MODE_COMMAND_FORCED = MAKE_COMMAND_ID(
       0xF1);  //!> Command to set the specified Mode, regardless of external control flag, replies
-              //!are: REPLY_MODE_REPLY, REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any
+              //! are: REPLY_MODE_REPLY, REPLY_WRONG_MODE_REPLY, and REPLY_REJECTED; don't add any
-              //!replies, as this will break the subsystem mode machine!!
+              //! replies, as this will break the subsystem mode machine!!
   static const Command_t REPLY_MODE_REPLY =
       MAKE_COMMAND_ID(0x02);  //!> Reply to a CMD_MODE_COMMAND or CMD_MODE_READ
   static const Command_t REPLY_MODE_INFO =
       MAKE_COMMAND_ID(0x03);  //!> Unrequested info about the current mode (used for composites to
-                              //!inform their container of a changed mode)
+                              //! inform their container of a changed mode)
   static const Command_t REPLY_CANT_REACH_MODE = MAKE_COMMAND_ID(
       0x04);  //!> Reply in case a mode command can't be executed. Par1: returnCode, Par2: 0
   static const Command_t REPLY_WRONG_MODE_REPLY =
       MAKE_COMMAND_ID(0x05);  //!> Reply to a CMD_MODE_COMMAND, indicating that a mode was commanded
-                              //!and a transition started but was aborted; the parameters contain
+                              //! and a transition started but was aborted; the parameters contain
-                              //!the mode that was reached
+                              //! the mode that was reached
   static const Command_t CMD_MODE_READ = MAKE_COMMAND_ID(
       0x06);  //!> Command to read the current mode and reply with a REPLY_MODE_REPLY
   static const Command_t CMD_MODE_ANNOUNCE = MAKE_COMMAND_ID(
       0x07);  //!> Command to trigger an ModeInfo Event. This command does NOT have a reply.
   static const Command_t CMD_MODE_ANNOUNCE_RECURSIVELY =
       MAKE_COMMAND_ID(0x08);  //!> Command to trigger an ModeInfo Event and to send this command to
-                              //!every child. This command does NOT have a reply.
+                              //! every child. This command does NOT have a reply.
 
   static Mode_t getMode(const CommandMessage* message);
   static Submode_t getSubmode(const CommandMessage* message);

src/fsfw/osal/linux/PeriodicPosixTask.h

@@ -65,8 +65,8 @@ class PeriodicPosixTask : public PosixThread, public PeriodicTaskIF {
   /**
    * @brief	The function containing the actual functionality of the task.
    * @details	The method sets and starts
-   * 			the task's period, then enters a loop that is repeated indefinitely. Within the loop,
+   * 			the task's period, then enters a loop that is repeated indefinitely. Within the
-   * all performOperation methods of the added objects are called. Afterwards the task will be
+   * loop, all performOperation methods of the added objects are called. Afterwards the task will be
    * blocked until the next period. On missing the deadline, the deadlineMissedFunction is executed.
    */
   virtual void taskFunctionality(void);

src/fsfw/osal/rtems/PeriodicTask.h

@@ -13,8 +13,8 @@ class ExecutableObjectIF;
  * @brief This class represents a specialized task for periodic activities of multiple objects.
  *
  * @details MultiObjectTask is an extension to ObjectTask in the way that it is able to execute
- * 			multiple objects that implement the ExecutableObjectIF interface. The objects must
+ * 			multiple objects that implement the ExecutableObjectIF interface. The objects
- * be added prior to starting the task.
+ * must be added prior to starting the task.
  * @author  baetz
  * @ingroup task_handling
  */

src/fsfw/osal/rtems/RTEMSTaskBase.h

@@ -25,8 +25,8 @@ class RTEMSTaskBase {
    * all other attributes are set with default values.
    * @param priority		Sets the priority of a task. Values range from a low 0 to a high 99.
    * @param stack_size	The stack size reserved by the operating system for the task.
-   * @param nam			The name of the Task, as a null-terminated String. Currently max 4 chars
+   * @param nam			The name of the Task, as a null-terminated String. Currently max 4
-   * supported (excluding Null-terminator), rest will be truncated
+   * chars supported (excluding Null-terminator), rest will be truncated
    */
   RTEMSTaskBase(rtems_task_priority priority, size_t stack_size, const char *name);
   /**

src/fsfw/rmap/RMAP.h

@@ -51,9 +51,9 @@ class RMAP : public HasReturnvaluesIF {
   // MAKE_RETURN_CODE(0xE4); //the data that was to be sent was too long for the hw to handle (write
   // command) or the expected len was bigger than maximal expected len (read command) command was
   // not sent
-  // replaced by DeviceCommunicationIF::NULLPOINTER	static const ReturnValue_t COMMAND_NULLPOINTER
+  // replaced by DeviceCommunicationIF::NULLPOINTER	static const ReturnValue_t
-  // = MAKE_RETURN_CODE(0xE5); //datalen was != 0 but data was == NULL in write command, or
+  // COMMAND_NULLPOINTER = MAKE_RETURN_CODE(0xE5); //datalen was != 0 but data was == NULL in write
-  // nullpointer in read command
+  // command, or nullpointer in read command
   static const ReturnValue_t COMMAND_CHANNEL_DEACTIVATED =
       MAKE_RETURN_CODE(0xE6);  // the channel has no port set
   static const ReturnValue_t COMMAND_PORT_OUT_OF_RANGE =
@@ -73,8 +73,8 @@ class RMAP : public HasReturnvaluesIF {
   static const ReturnValue_t REPLY_MISSMATCH = MAKE_RETURN_CODE(
       0xD3);  // a read command was issued, but get_write_rply called, or other way round
   static const ReturnValue_t REPLY_TIMEOUT = MAKE_RETURN_CODE(0xD4);  // timeout
-  // replaced by DeviceCommunicationIF::NULLPOINTER	static const ReturnValue_t REPLY_NULLPOINTER =
+  // replaced by DeviceCommunicationIF::NULLPOINTER	static const ReturnValue_t REPLY_NULLPOINTER
-  // MAKE_RETURN_CODE(0xD5);//one of the arguments in a read reply was NULL return values for
+  // = MAKE_RETURN_CODE(0xD5);//one of the arguments in a read reply was NULL return values for
   // get_reply
   static const ReturnValue_t REPLY_INTERFACE_BUSY =
       MAKE_RETURN_CODE(0xC0);  // Interface is busy (transmission buffer still being processed)
@@ -169,8 +169,8 @@ class RMAP : public HasReturnvaluesIF {
    * @param buffer the data to write
    * @param length length of data
    * @return
-   *      - @c COMMAND_NULLPOINTER				datalen was != 0 but data was == NULL in write
+   *      - @c COMMAND_NULLPOINTER				datalen was != 0 but data was == NULL in
-   * command
+   * write command
    *      - return codes of RMAPChannelIF::sendCommand()
    */
   static ReturnValue_t sendWriteCommand(RMAPCookie *cookie, const uint8_t *buffer, size_t length);
@@ -205,8 +205,8 @@ class RMAP : public HasReturnvaluesIF {
    * @param cookie to cookie to read from
    * @param expLength the expected maximum length of the reply
    * @return
-   *      - @c COMMAND_NULLPOINTER				datalen was != 0 but data was == NULL in write
+   *      - @c COMMAND_NULLPOINTER				datalen was != 0 but data was == NULL in
-   * command, or nullpointer in read command
+   * write command, or nullpointer in read command
    *      - return codes of RMAPChannelIF::sendCommand()
    */
   static ReturnValue_t sendReadCommand(RMAPCookie *cookie, uint32_t expLength);

src/fsfw/rmap/RMAPChannelIF.h

@@ -73,16 +73,16 @@ class RMAPChannelIF {
    * @param datalen length of data
    * @return
    *      - @c RETURN_OK
-   *      - @c COMMAND_NO_DESCRIPTORS_AVAILABLE 	no descriptors available for sending command;
+   *      - @c COMMAND_NO_DESCRIPTORS_AVAILABLE 	no descriptors available for sending
-   * command was not sent
+   * command; command was not sent
-   *      - @c COMMAND_BUFFER_FULL				no receiver buffer available for expected len; command
+   *      - @c COMMAND_BUFFER_FULL				no receiver buffer available for expected len;
-   * was not sent
-   *      - @c COMMAND_TOO_BIG					the data that was to be sent was too long for the hw to
-   * handle (write command) or the expected len was bigger than maximal expected len (read command)
    * command was not sent
+   *      - @c COMMAND_TOO_BIG					the data that was to be sent was too long for the hw
+   * to handle (write command) or the expected len was bigger than maximal expected len (read
+   * command) command was not sent
    *      - @c COMMAND_CHANNEL_DEACTIVATED		the channel has no port set
-   *      - @c NOT_SUPPORTED						if you dont feel like implementing
+   *      - @c NOT_SUPPORTED						if you dont feel like
-   * something...
+   * implementing something...
    */
   virtual ReturnValue_t sendCommand(RMAPCookie *cookie, uint8_t instruction, const uint8_t *data,
                                     size_t datalen) = 0;
@@ -97,8 +97,8 @@ class RMAPChannelIF {
    *      - @c REPLY_NO_REPLY				no reply was received
    *      - @c REPLY_NOT_SENT				command was not sent, implies no reply
    *      - @c REPLY_NOT_YET_SENT			command is still waiting to be sent
-   *      - @c WRITE_REPLY_INTERFACE_BUSY			Interface is busy (transmission buffer still being
+   *      - @c WRITE_REPLY_INTERFACE_BUSY			Interface is busy (transmission buffer still
-   * processed)
+   * being processed)
    *      - @c WRITE_REPLY_TRANSMISSION_ERROR		Interface encountered errors during last
    * operation, data could not be processed. (transmission error)
    *      - @c WRITE_REPLY_INVALID_DATA			Invalid data (amount / value)

src/fsfw/rmap/rmapStructs.h

@@ -32,10 +32,10 @@ static const uint8_t RMAP_COMMAND_READ = ((1 << RMAP_COMMAND_BIT) | (1 << RMAP_C
 static const uint8_t RMAP_REPLY_WRITE =
     ((1 << RMAP_COMMAND_BIT_WRITE) | (1 << RMAP_COMMAND_BIT_REPLY));
 static const uint8_t RMAP_REPLY_READ = ((1 << RMAP_COMMAND_BIT_REPLY));
-//#define RMAP_COMMAND_WRITE			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_WRITE) |
+//#define RMAP_COMMAND_WRITE			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_WRITE)
-//(1<<RMAP_COMMAND_BIT_REPLY)) #define RMAP_COMMAND_WRITE_VERIFY	((1<<RMAP_COMMAND_BIT) |
+//| (1<<RMAP_COMMAND_BIT_REPLY)) #define RMAP_COMMAND_WRITE_VERIFY	((1<<RMAP_COMMAND_BIT) |
 //(1<<RMAP_COMMAND_BIT_WRITE) | (1<<RMAP_COMMAND_BIT_REPLY) | (1<<RMAP_COMMAND_BIT_VERIFY)) #define
-//RMAP_COMMAND_READ			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_REPLY))
+// RMAP_COMMAND_READ			((1<<RMAP_COMMAND_BIT) | (1<<RMAP_COMMAND_BIT_REPLY))
 
 //#define RMAP_REPLY_WRITE			((1<<RMAP_COMMAND_BIT_WRITE) |
 //(1<<RMAP_COMMAND_BIT_REPLY))