Merge branch 'master' into development

This commit is contained in:
Steffen Gaisser 2020-11-02 15:16:10 +01:00
commit cf46aebf32
26 changed files with 421 additions and 4 deletions

11
FSFWVersion.h Normal file
View File

@ -0,0 +1,11 @@
#ifndef FSFW_DEFAULTCFG_VERSION_H_
#define FSFW_DEFAULTCFG_VERSION_H_
const char* const FSFW_VERSION_NAME = "fsfw";
#define FSFW_VERSION 0
#define FSFW_SUBVERSION 0
#endif /* FSFW_DEFAULTCFG_VERSION_H_ */

4
README.md Normal file
View File

@ -0,0 +1,4 @@
Flight Software Framework (FSFW)
======
I want to be written!

6
defaultcfg/README.md Normal file
View File

@ -0,0 +1,6 @@
# How to setup configuration folder for FSFW
It is recommended to copy the content of the defaultcfg folder
into a config folder which is in the same directory as the Flight
Software Framework submodule. After that, the config.mk folder should be
included by the primary Makefile with CURRENTPATH set correctly.

View File

@ -0,0 +1,54 @@
#ifndef CONFIG_FSFWCONFIG_H_
#define CONFIG_FSFWCONFIG_H_
#include <FSFWVersion.h>
#include <cstddef>
//! Used to determine whether C++ ostreams are used
//! Those can lead to code bloat.
#define FSFW_CPP_OSTREAM_ENABLED 1
//! Reduced printout to further decrese code size
//! Be careful, this also turns off most diagnostic prinouts!
#define FSFW_REDUCED_PRINTOUT 0
//! Can be used to enable debugging printouts for developing the FSFW
#define FSFW_DEBUGGING 0
//! Defines the FIFO depth of each commanding service base which
//! also determines how many commands a CSB service can handle in one cycle
//! simulataneously. This will increase the required RAM for
//! each CSB service !
#define FSFW_CSB_FIFO_DEPTH 6
//! If FSFW_OBJ_EVENT_TRANSLATION is set to one,
//! additional output which requires the translation files translateObjects
//! and translateEvents (and their compiled source files)
#define FSFW_OBJ_EVENT_TRANSLATION 0
#if FSFW_OBJ_EVENT_TRANSLATION == 1
#define FSFW_DEBUG_OUTPUT 1
//! Specify whether info events are printed too.
#define FSFW_DEBUG_INFO 1
#include <translateObjects.h>
#include <translateEvents.h>
#else
#define FSFW_DEBUG_OUTPUT 0
#endif
//! When using the newlib nano library, C99 support for stdio facilities
//! will not be provided. This define should be set to 1 if this is the case.
#define FSFW_NO_C99_IO 1
namespace fsfwconfig {
//! Default timestamp size. The default timestamp will be an eight byte CDC
//! short timestamp.
static constexpr uint8_t FSFW_MISSION_TIMESTAMP_SIZE = 8;
//! Configure the allocated pool sizes for the event manager.
static constexpr size_t FSFW_EVENTMGMR_MATCHTREE_NODES = 240;
static constexpr size_t FSFW_EVENTMGMT_EVENTIDMATCHERS = 120;
static constexpr size_t FSFW_EVENTMGMR_RANGEMATCHERS = 120;
}
#endif /* CONFIG_FSFWCONFIG_H_ */

View File

@ -0,0 +1,16 @@
#ifndef CONFIG_OBSWCONFIG_H_
#define CONFIG_OBSWCONFIG_H_
#include "OBSWVersion.h"
#ifdef __cplusplus
namespace config {
#endif
/* Add mission configuration flags here */
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_OBSWCONFIG_H_ */

View File

@ -0,0 +1,9 @@
#ifndef CONFIG_VERSION_H_
#define CONFIG_VERSION_H_
/* OBSW versioning can be specified in this file */
#define OBSW_VERSION 0
#define OBSW_SUBVERSION 0
#endif /* CONFIG_VERSION_H_ */

View File

@ -0,0 +1,15 @@
CXXSRC += $(wildcard $(CURRENTPATH)/ipc/*.cpp)
CXXSRC += $(wildcard $(CURRENTPATH)/objects/*.cpp)
CXXSRC += $(wildcard $(CURRENTPATH)/pollingsequence/*.cpp)
CXXSRC += $(wildcard $(CURRENTPATH)/events/*.cpp)
CXXSRC += $(wildcard $(CURRENTPATH)/tmtc/*.cpp)
CXXSRC += $(wildcard $(CURRENTPATH)/devices/*.cpp)
INCLUDES += $(CURRENTPATH)
INCLUDES += $(CURRENTPATH)/objects
INCLUDES += $(CURRENTPATH)/returnvalues
INCLUDES += $(CURRENTPATH)/tmtc
INCLUDES += $(CURRENTPATH)/events
INCLUDES += $(CURRENTPATH)/devices
INCLUDES += $(CURRENTPATH)/pollingsequence
INCLUDES += $(CURRENTPATH)/ipc

View File

@ -0,0 +1,5 @@
#include "logicalAddresses.h"

View File

@ -0,0 +1,18 @@
#ifndef CONFIG_DEVICES_LOGICALADDRESSES_H_
#define CONFIG_DEVICES_LOGICALADDRESSES_H_
#include <config/objects/systemObjectList.h>
#include <fsfw/devicehandlers/CookieIF.h>
#include <cstdint>
/**
* Can be used for addresses for physical devices like I2C adresses.
*/
namespace addresses {
/* Logical addresses have uint32_t datatype */
enum logicalAddresses: address_t {
};
}
#endif /* CONFIG_DEVICES_LOGICALADDRESSES_H_ */

View File

@ -0,0 +1,4 @@
#include "powerSwitcherList.h"

View File

@ -0,0 +1,12 @@
#ifndef CONFIG_DEVICES_POWERSWITCHERLIST_H_
#define CONFIG_DEVICES_POWERSWITCHERLIST_H_
namespace switches {
/* Switches are uint8_t datatype and go from 0 to 255 */
enum switcherList {
};
}
#endif /* CONFIG_DEVICES_POWERSWITCHERLIST_H_ */

View File

@ -0,0 +1,18 @@
#ifndef CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_
#define CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_
#include <cstdint>
#include <fsfw/events/fwSubsystemIdRanges.h>
/**
* @brief Custom subsystem IDs can be added here
* @details
* Subsystem IDs are used to create unique events.
*/
namespace SUBSYSTEM_ID {
enum: uint8_t {
SUBSYSTEM_ID_START = FW_SUBSYSTEM_ID_RANGE,
};
}
#endif /* CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_ */

View File

@ -0,0 +1,11 @@
#include <config/ipc/MissionMessageTypes.h>
#include <fsfw/ipc/CommandMessageIF.h>
void messagetypes::clearMissionMessage(CommandMessage* message) {
switch(message->getMessageType()) {
default:
break;
}
}

View File

@ -0,0 +1,21 @@
#ifndef CONFIG_IPC_MISSIONMESSAGETYPES_H_
#define CONFIG_IPC_MISSIONMESSAGETYPES_H_
#include <fsfw/ipc/CommandMessage.h>
#include <fsfw/ipc/FwMessageTypes.h>
/**
* Custom command messages are specified here.
* Most messages needed to use FSFW are already located in
* <fsfw/ipc/FwMessageTypes.h>
* @param message Generic Command Message
*/
namespace messagetypes {
enum CustomMessageTypes {
MISSION_MESSAGE_TYPE_START = FW_MESSAGES_COUNT
};
void clearMissionMessage(CommandMessage* message);
}
#endif /* CONFIG_IPC_MISSIONMESSAGETYPES_H_ */

View File

@ -0,0 +1,54 @@
#include "Factory.h"
#include "../tmtc/apid.h"
#include "../tmtc/pusIds.h"
#include "../objects/systemObjectList.h"
#include "../devices/logicalAddresses.h"
#include "../devices/powerSwitcherList.h"
#include <fsfw/devicehandlers/DeviceHandlerBase.h>
#include <fsfw/events/EventManager.h>
#include <fsfw/health/HealthTable.h>
#include <fsfw/tmtcpacket/pus/TmPacketStored.h>
#include <fsfw/tmtcservices/CommandingServiceBase.h>
#include <fsfw/tmtcservices/PusServiceBase.h>
#include <cstdint>
/**
* This class should be used to create all system objects required for
* the on-board software, using the object ID list from the configuration
* folder.
*
* The objects are registered in the internal object manager automatically.
* This is used later to add objects to tasks.
*
* This file also sets static framework IDs.
*
* Framework objects are created first.
* @ingroup init
*/
void Factory::produce(void) {
setStaticFrameworkObjectIds();
new EventManager(objects::EVENT_MANAGER);
new HealthTable(objects::HEALTH_TABLE);
//new InternalErrorReporter(objects::INTERNAL_ERROR_REPORTER);
}
void Factory::setStaticFrameworkObjectIds() {
PusServiceBase::packetSource = objects::PUS_PACKET_DISTRIBUTOR;
PusServiceBase::packetDestination = objects::TM_FUNNEL;
CommandingServiceBase::defaultPacketSource = objects::PUS_PACKET_DISTRIBUTOR;
CommandingServiceBase::defaultPacketDestination = objects::TM_FUNNEL;
VerificationReporter::messageReceiver = objects::PUS_SERVICE_1_VERIFICATION;
DeviceHandlerBase::powerSwitcherId = objects::NO_OBJECT;
DeviceHandlerBase::rawDataReceiverId = objects::PUS_SERVICE_2_DEVICE_ACCESS;
DeviceHandlerFailureIsolation::powerConfirmationId = objects::NO_OBJECT;
TmPacketStored::timeStamperId = objects::PUS_TIME;
//TmFunnel::downlinkDestination = objects::NO_OBJECT;
}

View File

@ -0,0 +1,17 @@
#ifndef FACTORY_H_
#define FACTORY_H_
#include <fsfw/objectmanager/SystemObjectIF.h>
#include <cstddef>
namespace Factory {
/**
* @brief Creates all SystemObject elements which are persistent
* during execution.
*/
void produce();
void setStaticFrameworkObjectIds();
}
#endif /* FACTORY_H_ */

View File

@ -0,0 +1,16 @@
#ifndef CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#define CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
#include <cstdint>
#include <fsfw/objectmanager/frameworkObjects.h>
// The objects will be instantiated in the ID order
namespace objects {
enum sourceObjects: uint32_t {
/* All addresses between start and end are reserved for the FSFW */
FSFW_CONFIG_RESERVED_START = PUS_SERVICE_1_VERIFICATION,
FSFW_CONFIG_RESERVED_END = TM_STORE
};
}
#endif /* BSP_CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_ */

View File

@ -0,0 +1,23 @@
#include "PollingSequenceFactory.h"
#include <fsfw/serviceinterface/ServiceInterfaceStream.h>
#include <fsfw/devicehandlers/DeviceHandlerIF.h>
#include <fsfw/tasks/FixedTimeslotTaskIF.h>
ReturnValue_t pst::pollingSequenceInitDefault(
FixedTimeslotTaskIF *thisSequence) {
/* Length of a communication cycle */
uint32_t length = thisSequence->getPeriodMs();
/* Add polling sequence table here */
if (thisSequence->checkSequence() == HasReturnvaluesIF::RETURN_OK) {
return HasReturnvaluesIF::RETURN_OK;
}
else {
sif::error << "pst::pollingSequenceInitDefault: Sequence invalid!"
<< std::endl;
return HasReturnvaluesIF::RETURN_FAILED;
}
}

View File

@ -0,0 +1,32 @@
#ifndef POLLINGSEQUENCEFACTORY_H_
#define POLLINGSEQUENCEFACTORY_H_
#include <fsfw/returnvalues/HasReturnvaluesIF.h>
class FixedTimeslotTaskIF;
/**
* All device handlers are scheduled by adding them into Polling Sequence Tables (PST)
* to satisfy stricter timing requirements of device communication,
* A device handler has four different communication steps:
* 1. DeviceHandlerIF::SEND_WRITE -> Send write via interface
* 2. DeviceHandlerIF::GET_WRITE -> Get confirmation for write
* 3. DeviceHandlerIF::SEND_READ -> Send read request
* 4. DeviceHandlerIF::GET_READ -> Read from interface
* The PST specifies precisely when the respective ComIF functions are called
* during the communication cycle time.
* The task is created using the FixedTimeslotTaskIF,
* which utilises the underlying Operating System Abstraction Layer (OSAL)
*
* @param thisSequence FixedTimeslotTaskIF * object is passed inside the Factory class when creating the PST
* @return
*/
namespace pst {
/* Default PST */
ReturnValue_t pollingSequenceInitDefault(FixedTimeslotTaskIF *thisSequence);
}
#endif /* POLLINGSEQUENCEINIT_H_ */

View File

@ -0,0 +1,16 @@
#ifndef CONFIG_RETURNVALUES_CLASSIDS_H_
#define CONFIG_RETURNVALUES_CLASSIDS_H_
#include <fsfw/returnvalues/FwClassIds.h>
/**
* @brief CLASS_ID defintions which are required for custom returnvalues.
*/
namespace CLASS_ID {
enum {
MISSION_CLASS_ID_START = FW_CLASS_ID_COUNT,
};
}
#endif /* CONFIG_RETURNVALUES_CLASSIDS_H_ */

View File

@ -0,0 +1,18 @@
#ifndef CONFIG_TMTC_APID_H_
#define CONFIG_TMTC_APID_H_
#include <cstdint>
/**
* Application Process Definition: entity, uniquely identified by an
* application process ID (APID), capable of generating telemetry source
* packets and receiving telecommand packets.
*
* Chose APID(s) for mission and define it here.
*/
namespace apid {
static const uint16_t DEFAULT_APID = 0x00;
}
#endif /* CONFIG_TMTC_APID_H_ */

View File

@ -0,0 +1,23 @@
#ifndef CONFIG_TMTC_PUSIDS_HPP_
#define CONFIG_TMTC_PUSIDS_HPP_
namespace pus {
enum Ids: uint8_t {
PUS_SERVICE_1 = 1,
PUS_SERVICE_2 = 2,
PUS_SERVICE_3 = 3,
PUS_SERVICE_5 = 5,
PUS_SERVICE_6 = 6,
PUS_SERVICE_8 = 8,
PUS_SERVICE_9 = 9,
PUS_SERVICE_11 = 11,
PUS_SERVICE_17 = 17,
PUS_SERVICE_19 = 19,
PUS_SERVICE_20 = 20,
PUS_SERVICE_23 = 23,
PUS_SERVICE_200 = 200,
PUS_SERVICE_201 = 201,
};
};
#endif /* CONFIG_TMTC_PUSIDS_HPP_ */

View File

@ -1,5 +1,7 @@
#include "EventManager.h"
#include "EventMessage.h"
#include <FSFWConfig.h>
#include "../serviceinterface/ServiceInterfaceStream.h"
#include "../ipc/QueueFactory.h"
#include "../ipc/MutexFactory.h"
@ -12,8 +14,10 @@ const uint16_t EventManager::POOL_SIZES[N_POOLS] = {
// objects registering for certain events.
// Each listener requires 1 or 2 EventIdMatcher and 1 or 2 ReportRangeMatcher.
// So a good guess is 75 to a max of 100 pools required for each, which fits well.
// SHOULDDO: Shouldn't this be in the config folder and passed via ctor?
const uint16_t EventManager::N_ELEMENTS[N_POOLS] = { 240, 120, 120 };
const uint16_t EventManager::N_ELEMENTS[N_POOLS] = {
fsfwconfig::FSFW_EVENTMGMR_MATCHTREE_NODES ,
fsfwconfig::FSFW_EVENTMGMT_EVENTIDMATCHERS,
fsfwconfig::FSFW_EVENTMGMR_RANGEMATCHERS };
EventManager::EventManager(object_id_t setObjectId) :
SystemObject(setObjectId),

View File

@ -8,6 +8,16 @@ run in the terminal or in eclipse.
### Instructions
To run the fsfw unittests in the project, perform following steps:
1. Copy the testcfg folder the project root (folder containing the FSFW).
2. There is a makefile inside the testcfg folder which can be used to have
a starting point to compile the unit tests. Copy that Makefile to the project
root
3. Create a folder named catch2 (can have other name which requires Makefile
adaption) and copy the Catch2 header files there (NOTE: CMake support
not enabled yet!)
### Eclipse CDT settings
The default eclipse terminal has issues displaying the colors used

View File

@ -1,7 +1,7 @@
#ifndef HOSTED_CONFIG_CDATAPOOL_DATAPOOLINIT_H_
#define HOSTED_CONFIG_CDATAPOOL_DATAPOOLINIT_H_
#include <fsfw/datapoolglob/GlobalDataPool.h>
#include <fsfw/datapool/DataPool.h>
#include <fsfw/datapool/PoolEntryIF.h>
#include <map>
#include <cstdint>