Merge branch 'eive/develop' into meier/develop

hal/src/fsfw_hal/common/gpio/GpioIF.h

@@ -46,9 +46,9 @@ class GpioIF : public HasReturnvaluesIF {
    *          an ouput or input gpio.
    *
    * @param gpioId    A unique number which specifies the GPIO to read.
-   * @param gpioState State of GPIO will be written to this pointer.
+   * @param gpioState State of GPIO will be written to this reference
    */
-  virtual ReturnValue_t readGpio(gpioId_t gpioId, int* gpioState) = 0;
+  virtual ReturnValue_t readGpio(gpioId_t gpioId, gpio::Levels& gpioState) = 0;
 };
 
 #endif /* COMMON_GPIO_GPIOIF_H_ */

hal/src/fsfw_hal/common/gpio/gpioDefinitions.h

@@ -9,7 +9,7 @@ using gpioId_t = uint16_t;
 
 namespace gpio {
 
-enum class Levels : int { LOW = 0, HIGH = 1, NONE = 99 };
+enum class Levels : int { LOW = 0, HIGH = 1, FAILED = -1, NONE = 99 };
 
 enum class Direction : int { IN = 0, OUT = 1 };
 

hal/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.cpp

@@ -280,7 +280,7 @@ ReturnValue_t LinuxLibgpioIF::driveGpio(gpioId_t gpioId, GpiodRegularBase& regul
   return RETURN_OK;
 }
 
-ReturnValue_t LinuxLibgpioIF::readGpio(gpioId_t gpioId, int* gpioState) {
+ReturnValue_t LinuxLibgpioIF::readGpio(gpioId_t gpioId, gpio::Levels& gpioState) {
   gpioMapIter = gpioMap.find(gpioId);
   if (gpioMapIter == gpioMap.end()) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
@@ -299,7 +299,10 @@ ReturnValue_t LinuxLibgpioIF::readGpio(gpioId_t gpioId, int* gpioState) {
     if (regularGpio == nullptr) {
       return GPIO_TYPE_FAILURE;
     }
-    *gpioState = gpiod_line_get_value(regularGpio->lineHandle);
+    gpioState = static_cast<gpio::Levels>(gpiod_line_get_value(regularGpio->lineHandle));
+    if (gpioState == gpio::Levels::FAILED) {
+      return GPIO_GET_VALUE_FAILED;
+    }
   } else {
     auto gpioCallback = dynamic_cast<GpioCallback*>(gpioMapIter->second);
     if (gpioCallback->callback == nullptr) {

hal/src/fsfw_hal/linux/gpio/LinuxLibgpioIF.h

@@ -31,14 +31,16 @@ class LinuxLibgpioIF : public GpioIF, public SystemObject {
       HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 5);
   static constexpr ReturnValue_t GPIO_INIT_FAILED =
       HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 6);
-
+  // Will be returned if getting the line value failed. Error type will be set to errno in this case
+  static constexpr ReturnValue_t GPIO_GET_VALUE_FAILED =
+      HasReturnvaluesIF::makeReturnCode(gpioRetvalId, 7);
   LinuxLibgpioIF(object_id_t objectId);
   virtual ~LinuxLibgpioIF();
 
   ReturnValue_t addGpios(GpioCookie* gpioCookie) override;
   ReturnValue_t pullHigh(gpioId_t gpioId) override;
   ReturnValue_t pullLow(gpioId_t gpioId) override;
-  ReturnValue_t readGpio(gpioId_t gpioId, int* gpioState) override;
+  ReturnValue_t readGpio(gpioId_t gpioId, gpio::Levels& gpioState) override;
 
  private:
   static const size_t MAX_CHIPNAME_LENGTH = 11;

hal/src/fsfw_hal/linux/i2c/I2cComIF.cpp

@@ -170,18 +170,20 @@ ReturnValue_t I2cComIF::requestReceiveMessage(CookieIF* cookie, size_t requestLe
 
   int readLen = read(fd, replyBuffer, requestLen);
   if (readLen != static_cast<int>(requestLen)) {
-#if FSFW_VERBOSE_LEVEL >= 1 and FSFW_CPP_OSTREAM_ENABLED == 1
+#if FSFW_VERBOSE_LEVEL >= 1
-    sif::error << "I2cComIF::requestReceiveMessage: Reading from I2C "
+#if FSFW_CPP_OSTREAM_ENABLED == 1
-               << "device failed with error code " << errno << ". Description"
+    if (readLen < 0) {
-               << " of error: " << strerror(errno) << std::endl;
+      sif::warning << "I2cComIF::requestReceiveMessage: Reading from I2C "
-    sif::error << "I2cComIF::requestReceiveMessage: Read only " << readLen << " from " << requestLen
+                   << "device failed with error code " << errno << " | " << strerror(errno)
-               << " bytes" << std::endl;
+                   << std::endl;
+    } else {
+      sif::warning << "I2cComIF::requestReceiveMessage: Read only " << readLen << " from "
+                   << requestLen << " bytes" << std::endl;
+    }
+#else
+#endif
 #endif
     i2cDeviceMapIter->second.replyLen = 0;
-#if FSFW_CPP_OSTREAM_ENABLED == 1
-    sif::debug << "I2cComIF::requestReceiveMessage: Read " << readLen << " of " << requestLen
-               << " bytes" << std::endl;
-#endif
     return HasReturnvaluesIF::RETURN_FAILED;
   }
 

hal/src/fsfw_hal/linux/uart/UartComIF.cpp

@@ -314,7 +314,7 @@ void UartComIF::configureBaudrate(struct termios* options, UartCookie* uartCooki
       cfsetispeed(options, B4000000);
       cfsetospeed(options, B4000000);
       break;
-#endif // ! __APPLE__
+#endif  // ! __APPLE__
     default:
 #if FSFW_CPP_OSTREAM_ENABLED == 1
       sif::warning << "UartComIF::configureBaudrate: Baudrate not supported" << std::endl;

src/fsfw/devicehandlers/DeviceHandlerBase.h

@@ -1084,7 +1084,8 @@ class DeviceHandlerBase : public DeviceHandlerIF,
   /**
    * Same as triggerEvent, but for forwarding if object is used as proxy.
    */
-  virtual void forwardEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0) const override;
+  virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
+                            uint32_t parameter2 = 0) const override;
 
   /**
    * Checks if current mode is transitional mode.

src/fsfw/objectmanager/SystemObject.h

@@ -50,7 +50,8 @@ class SystemObject : public SystemObjectIF {
   virtual ReturnValue_t initialize() override;
   virtual ReturnValue_t checkObjectConnections() override;
 
-  virtual void forwardEvent(Event event, uint32_t parameter1 = 0, uint32_t parameter2 = 0) const override;
+  virtual void forwardEvent(Event event, uint32_t parameter1 = 0,
+                            uint32_t parameter2 = 0) const override;
 };
 
 #endif /* FSFW_OBJECTMANAGER_SYSTEMOBJECT_H_ */

src/fsfw/osal/common/UdpTcPollingTask.cpp

@@ -154,7 +154,7 @@ void UdpTcPollingTask::setTimeout(double timeoutSeconds) {
 #endif
   }
 #elif defined(PLATFORM_UNIX)
-  timeval tval {};
+  timeval tval{};
   tval = timevalOperations::toTimeval(timeoutSeconds);
   int result = setsockopt(serverSocket, SOL_SOCKET, SO_RCVTIMEO, &tval, sizeof(receptionTimeout));
   if (result == -1) {

src/fsfw/osal/common/UdpTmTcBridge.cpp

@@ -20,7 +20,7 @@
 const std::string UdpTmTcBridge::DEFAULT_SERVER_PORT = tcpip::DEFAULT_SERVER_PORT;
 
 UdpTmTcBridge::UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination,
-                             const std::string& udpServerPort_, object_id_t tmStoreId,
+                             const std::string &udpServerPort_, object_id_t tmStoreId,
                              object_id_t tcStoreId)
     : TmTcBridge(objectId, tcDestination, tmStoreId, tcStoreId) {
   if (udpServerPort_.empty()) {
@@ -118,7 +118,7 @@ ReturnValue_t UdpTmTcBridge::sendTm(const uint8_t *data, size_t dataLen) {
 #endif
 
   ssize_t bytesSent = sendto(serverSocket, reinterpret_cast<const char *>(data), dataLen, flags,
-                         &clientAddress, clientAddressLen);
+                             &clientAddress, clientAddressLen);
   if (bytesSent == SOCKET_ERROR) {
 #if FSFW_CPP_OSTREAM_ENABLED == 1
     sif::warning << "TmTcUdpBridge::sendTm: Send operation failed." << std::endl;

src/fsfw/osal/common/UdpTmTcBridge.h

@@ -29,8 +29,8 @@ class UdpTmTcBridge : public TmTcBridge, public TcpIpBase {
   /* The ports chosen here should not be used by any other process. */
   static const std::string DEFAULT_SERVER_PORT;
 
-  UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination, const std::string& udpServerPort = "",
+  UdpTmTcBridge(object_id_t objectId, object_id_t tcDestination,
-                object_id_t tmStoreId = objects::TM_STORE,
+                const std::string& udpServerPort = "", object_id_t tmStoreId = objects::TM_STORE,
                 object_id_t tcStoreId = objects::TC_STORE);
   ~UdpTmTcBridge() override;