FSFWVersion.h

@@ -0,0 +1,11 @@
+#ifndef FSFW_DEFAULTCFG_VERSION_H_
+#define FSFW_DEFAULTCFG_VERSION_H_
+
+const char* const FSFW_VERSION_NAME = "fsfw";
+
+#define FSFW_VERSION 		0
+#define	FSFW_SUBVERSION 	0
+
+
+
+#endif /* FSFW_DEFAULTCFG_VERSION_H_ */

README.md

@@ -0,0 +1,4 @@
+Flight Software Framework (FSFW)
+======
+
+I want to be written!

defaultcfg/README.md

@@ -0,0 +1,6 @@
+# How to setup configuration folder for FSFW
+
+It is recommended to copy the content of the defaultcfg folder
+into a config folder which is in the same directory as the Flight
+Software Framework submodule. After that, the config.mk folder should be
+included by the primary Makefile with CURRENTPATH set correctly.

defaultcfg/config/FSFWConfig.h

@@ -0,0 +1,54 @@
+#ifndef CONFIG_FSFWCONFIG_H_
+#define CONFIG_FSFWCONFIG_H_
+
+#include <FSFWVersion.h>
+#include <cstddef>
+
+//! Used to determine whether C++ ostreams are used
+//! Those can lead to code bloat.
+#define FSFW_CPP_OSTREAM_ENABLED 	1
+
+//! Reduced printout to further decrese code size
+//! Be careful, this also turns off most diagnostic prinouts!
+#define FSFW_REDUCED_PRINTOUT		0
+
+//! Can be used to enable debugging printouts for developing the FSFW
+#define FSFW_DEBUGGING              0
+
+//! Defines the FIFO depth of each commanding service base which
+//! also determines how many commands a CSB service can handle in one cycle
+//! simulataneously. This will increase the required RAM for
+//! each CSB service !
+#define FSFW_CSB_FIFO_DEPTH			6
+
+//! If FSFW_OBJ_EVENT_TRANSLATION is set to one,
+//! additional output which requires the translation files translateObjects
+//! and translateEvents (and their compiled source files)
+#define FSFW_OBJ_EVENT_TRANSLATION	0
+
+#if FSFW_OBJ_EVENT_TRANSLATION == 1
+#define FSFW_DEBUG_OUTPUT 			1
+//! Specify whether info events are printed too.
+#define FSFW_DEBUG_INFO				1
+#include <translateObjects.h>
+#include <translateEvents.h>
+#else
+#define FSFW_DEBUG_OUTPUT			0
+#endif
+
+//! When using the newlib nano library, C99 support for stdio facilities
+//! will not be provided. This define should be set to 1 if this is the case.
+#define FSFW_NO_C99_IO 	1
+
+namespace fsfwconfig {
+//! Default timestamp size. The default timestamp will be an eight byte CDC
+//! short timestamp.
+static constexpr uint8_t FSFW_MISSION_TIMESTAMP_SIZE = 8;
+
+//! Configure the allocated pool sizes for the event manager.
+static constexpr size_t FSFW_EVENTMGMR_MATCHTREE_NODES = 240;
+static constexpr size_t FSFW_EVENTMGMT_EVENTIDMATCHERS = 120;
+static constexpr size_t FSFW_EVENTMGMR_RANGEMATCHERS   = 120;
+}
+
+#endif /* CONFIG_FSFWCONFIG_H_ */

defaultcfg/config/OBSWConfig.h

@@ -0,0 +1,16 @@
+#ifndef CONFIG_OBSWCONFIG_H_
+#define CONFIG_OBSWCONFIG_H_
+
+#include "OBSWVersion.h"
+
+#ifdef __cplusplus
+namespace config {
+#endif
+
+/* Add mission configuration flags here */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CONFIG_OBSWCONFIG_H_ */

defaultcfg/config/OBSWVersion.h

@@ -0,0 +1,9 @@
+#ifndef CONFIG_VERSION_H_
+#define CONFIG_VERSION_H_
+
+/* OBSW versioning can be specified in this file */
+
+#define OBSW_VERSION      0
+#define OBSW_SUBVERSION   0
+
+#endif /* CONFIG_VERSION_H_ */

defaultcfg/config/config.mk

@@ -0,0 +1,15 @@
+CXXSRC += $(wildcard $(CURRENTPATH)/ipc/*.cpp)
+CXXSRC += $(wildcard $(CURRENTPATH)/objects/*.cpp)
+CXXSRC += $(wildcard $(CURRENTPATH)/pollingsequence/*.cpp)
+CXXSRC += $(wildcard $(CURRENTPATH)/events/*.cpp)
+CXXSRC += $(wildcard $(CURRENTPATH)/tmtc/*.cpp)
+CXXSRC += $(wildcard $(CURRENTPATH)/devices/*.cpp)
+
+INCLUDES += $(CURRENTPATH)
+INCLUDES += $(CURRENTPATH)/objects
+INCLUDES += $(CURRENTPATH)/returnvalues
+INCLUDES += $(CURRENTPATH)/tmtc
+INCLUDES += $(CURRENTPATH)/events
+INCLUDES += $(CURRENTPATH)/devices
+INCLUDES += $(CURRENTPATH)/pollingsequence
+INCLUDES += $(CURRENTPATH)/ipc

defaultcfg/config/devices/logicalAddresses.cpp

@@ -0,0 +1,5 @@
+#include "logicalAddresses.h"
+
+
+
+

defaultcfg/config/devices/logicalAddresses.h

@@ -0,0 +1,18 @@
+#ifndef CONFIG_DEVICES_LOGICALADDRESSES_H_
+#define CONFIG_DEVICES_LOGICALADDRESSES_H_
+
+#include <config/objects/systemObjectList.h>
+#include <fsfw/devicehandlers/CookieIF.h>
+#include <cstdint>
+
+/**
+ * Can be used for addresses for physical devices like I2C adresses.
+ */
+namespace addresses {
+	/* Logical addresses have uint32_t datatype */
+	enum logicalAddresses: address_t {
+	};
+}
+
+
+#endif /* CONFIG_DEVICES_LOGICALADDRESSES_H_ */

defaultcfg/config/devices/powerSwitcherList.cpp

@@ -0,0 +1,4 @@
+#include "powerSwitcherList.h"
+
+
+

defaultcfg/config/devices/powerSwitcherList.h

@@ -0,0 +1,12 @@
+#ifndef CONFIG_DEVICES_POWERSWITCHERLIST_H_
+#define CONFIG_DEVICES_POWERSWITCHERLIST_H_
+
+namespace switches {
+	/* Switches are uint8_t datatype and go from 0 to 255 */
+	enum switcherList {
+	};
+
+}
+
+
+#endif /* CONFIG_DEVICES_POWERSWITCHERLIST_H_ */

defaultcfg/config/events/subsystemIdRanges.h

@@ -0,0 +1,18 @@
+#ifndef CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_
+#define CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_
+
+#include <cstdint>
+#include <fsfw/events/fwSubsystemIdRanges.h>
+
+/**
+ * @brief	Custom subsystem IDs can be added here
+ * @details
+ * Subsystem IDs are used to create unique events.
+ */
+namespace SUBSYSTEM_ID {
+enum: uint8_t {
+	SUBSYSTEM_ID_START = FW_SUBSYSTEM_ID_RANGE,
+};
+}
+
+#endif /* CONFIG_EVENTS_SUBSYSTEMIDRANGES_H_ */

defaultcfg/config/ipc/missionMessageTypes.cpp

@@ -0,0 +1,11 @@
+#include <config/ipc/MissionMessageTypes.h>
+#include <fsfw/ipc/CommandMessageIF.h>
+
+void messagetypes::clearMissionMessage(CommandMessage* message) {
+	switch(message->getMessageType()) {
+	default:
+		break;
+	}
+}
+
+

defaultcfg/config/ipc/missionMessageTypes.h

@@ -0,0 +1,21 @@
+#ifndef CONFIG_IPC_MISSIONMESSAGETYPES_H_
+#define CONFIG_IPC_MISSIONMESSAGETYPES_H_
+
+#include <fsfw/ipc/CommandMessage.h>
+#include <fsfw/ipc/FwMessageTypes.h>
+
+/**
+ * Custom command messages are specified here.
+ * Most messages needed to use FSFW are already located in
+ * <fsfw/ipc/FwMessageTypes.h>
+ * @param message Generic Command Message
+ */
+namespace messagetypes {
+enum CustomMessageTypes {
+	MISSION_MESSAGE_TYPE_START = FW_MESSAGES_COUNT
+};
+
+void clearMissionMessage(CommandMessage* message);
+}
+
+#endif /* CONFIG_IPC_MISSIONMESSAGETYPES_H_ */

defaultcfg/config/objects/Factory.cpp

@@ -0,0 +1,54 @@
+#include "Factory.h"
+#include "../tmtc/apid.h"
+#include "../tmtc/pusIds.h"
+#include "../objects/systemObjectList.h"
+#include "../devices/logicalAddresses.h"
+#include "../devices/powerSwitcherList.h"
+
+#include <fsfw/devicehandlers/DeviceHandlerBase.h>
+#include <fsfw/events/EventManager.h>
+#include <fsfw/health/HealthTable.h>
+#include <fsfw/tmtcpacket/pus/TmPacketStored.h>
+#include <fsfw/tmtcservices/CommandingServiceBase.h>
+#include <fsfw/tmtcservices/PusServiceBase.h>
+
+#include <cstdint>
+
+/**
+ * This class should be used to create all system objects required for
+ * the on-board software, using the object ID list from the configuration
+ * folder.
+ *
+ * The objects are registered in the internal object manager automatically.
+ * This is used later to add objects to tasks.
+ *
+ * This file also sets static framework IDs.
+ *
+ * Framework objects are created first.
+ * @ingroup init
+ */
+void Factory::produce(void) {
+	setStaticFrameworkObjectIds();
+	new EventManager(objects::EVENT_MANAGER);
+	new HealthTable(objects::HEALTH_TABLE);
+	//new InternalErrorReporter(objects::INTERNAL_ERROR_REPORTER);
+}
+
+void Factory::setStaticFrameworkObjectIds() {
+	PusServiceBase::packetSource = objects::PUS_PACKET_DISTRIBUTOR;
+	PusServiceBase::packetDestination = objects::TM_FUNNEL;
+
+	CommandingServiceBase::defaultPacketSource = objects::PUS_PACKET_DISTRIBUTOR;
+	CommandingServiceBase::defaultPacketDestination = objects::TM_FUNNEL;
+
+	VerificationReporter::messageReceiver = objects::PUS_SERVICE_1_VERIFICATION;
+
+	DeviceHandlerBase::powerSwitcherId = objects::NO_OBJECT;
+	DeviceHandlerBase::rawDataReceiverId = objects::PUS_SERVICE_2_DEVICE_ACCESS;
+
+	DeviceHandlerFailureIsolation::powerConfirmationId = objects::NO_OBJECT;
+
+	TmPacketStored::timeStamperId = objects::PUS_TIME;
+	//TmFunnel::downlinkDestination = objects::NO_OBJECT;
+}
+

defaultcfg/config/objects/Factory.h

@@ -0,0 +1,17 @@
+#ifndef FACTORY_H_
+#define FACTORY_H_
+
+#include <fsfw/objectmanager/SystemObjectIF.h>
+#include <cstddef>
+
+namespace Factory {
+	/**
+	 * @brief   Creates all SystemObject elements which are persistent
+	 *          during execution.
+	 */
+	void produce();
+	void setStaticFrameworkObjectIds();
+}
+
+
+#endif /* FACTORY_H_ */

defaultcfg/config/objects/systemObjectList.h

@@ -0,0 +1,16 @@
+#ifndef CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
+#define CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_
+
+#include <cstdint>
+#include <fsfw/objectmanager/frameworkObjects.h>
+
+// The objects will be instantiated in the ID order
+namespace objects {
+	enum sourceObjects: uint32_t {
+		/* All addresses between start and end are reserved for the FSFW */
+		FSFW_CONFIG_RESERVED_START = PUS_SERVICE_1_VERIFICATION,
+		FSFW_CONFIG_RESERVED_END = TM_STORE
+	};
+}
+
+#endif /* BSP_CONFIG_OBJECTS_SYSTEMOBJECTLIST_H_ */

defaultcfg/config/pollingsequence/PollingSequenceFactory.cpp

@@ -0,0 +1,23 @@
+#include "PollingSequenceFactory.h"
+
+#include <fsfw/serviceinterface/ServiceInterfaceStream.h>
+#include <fsfw/devicehandlers/DeviceHandlerIF.h>
+#include <fsfw/tasks/FixedTimeslotTaskIF.h>
+
+ReturnValue_t pst::pollingSequenceInitDefault(
+        FixedTimeslotTaskIF *thisSequence) {
+	/* Length of a communication cycle */
+	uint32_t length = thisSequence->getPeriodMs();
+
+	/* Add polling sequence table here */
+
+	if (thisSequence->checkSequence() == HasReturnvaluesIF::RETURN_OK) {
+		return HasReturnvaluesIF::RETURN_OK;
+	}
+	else {
+		sif::error << "pst::pollingSequenceInitDefault: Sequence invalid!"
+		        << std::endl;
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+}
+

defaultcfg/config/pollingsequence/PollingSequenceFactory.h

@@ -0,0 +1,32 @@
+#ifndef POLLINGSEQUENCEFACTORY_H_
+#define POLLINGSEQUENCEFACTORY_H_
+
+#include <fsfw/returnvalues/HasReturnvaluesIF.h>
+
+class FixedTimeslotTaskIF;
+
+/**
+ * All device handlers are scheduled by adding them into  Polling Sequence Tables (PST)
+ * to satisfy stricter timing requirements of device communication,
+ * A device handler has four different communication steps:
+ *   1. DeviceHandlerIF::SEND_WRITE -> Send write via interface
+ *   2. DeviceHandlerIF::GET_WRITE -> Get confirmation for write
+ *   3. DeviceHandlerIF::SEND_READ -> Send read request
+ *   4. DeviceHandlerIF::GET_READ -> Read from interface
+ * The PST specifies precisely when the respective ComIF functions are called
+ * during the communication cycle time.
+ * The task is created using the FixedTimeslotTaskIF,
+ * which utilises the underlying Operating System Abstraction Layer (OSAL)
+ *
+ * @param thisSequence FixedTimeslotTaskIF * object is passed inside the Factory class when creating the PST
+ * @return
+ */
+namespace pst {
+
+/* Default PST */
+ReturnValue_t pollingSequenceInitDefault(FixedTimeslotTaskIF *thisSequence);
+
+
+}
+
+#endif /* POLLINGSEQUENCEINIT_H_ */

defaultcfg/config/returnvalues/classIds.h

@@ -0,0 +1,16 @@
+#ifndef CONFIG_RETURNVALUES_CLASSIDS_H_
+#define CONFIG_RETURNVALUES_CLASSIDS_H_
+
+#include <fsfw/returnvalues/FwClassIds.h>
+
+/**
+ * @brief   CLASS_ID defintions which are required for custom returnvalues.
+ */
+namespace CLASS_ID {
+enum {
+	MISSION_CLASS_ID_START = FW_CLASS_ID_COUNT,
+};
+}
+
+
+#endif /* CONFIG_RETURNVALUES_CLASSIDS_H_ */

defaultcfg/config/tmtc/apid.h

@@ -0,0 +1,18 @@
+#ifndef CONFIG_TMTC_APID_H_
+#define CONFIG_TMTC_APID_H_
+
+#include <cstdint>
+
+/**
+ * Application Process Definition: entity, uniquely identified by an
+ * application process ID (APID), capable of generating telemetry source
+ * packets and receiving telecommand packets.
+ *
+ * Chose APID(s) for mission and define it here.
+ */
+namespace apid {
+	static const uint16_t DEFAULT_APID = 0x00;
+}
+
+
+#endif /* CONFIG_TMTC_APID_H_ */

defaultcfg/config/tmtc/pusIds.h

@@ -0,0 +1,23 @@
+#ifndef CONFIG_TMTC_PUSIDS_HPP_
+#define CONFIG_TMTC_PUSIDS_HPP_
+
+namespace pus {
+enum Ids: uint8_t {
+	PUS_SERVICE_1 = 1,
+	PUS_SERVICE_2 = 2,
+	PUS_SERVICE_3 = 3,
+	PUS_SERVICE_5 = 5,
+	PUS_SERVICE_6 = 6,
+	PUS_SERVICE_8 = 8,
+	PUS_SERVICE_9 = 9,
+	PUS_SERVICE_11 = 11,
+	PUS_SERVICE_17 = 17,
+	PUS_SERVICE_19 = 19,
+	PUS_SERVICE_20 = 20,
+	PUS_SERVICE_23 = 23,
+	PUS_SERVICE_200 = 200,
+	PUS_SERVICE_201 = 201,
+};
+};
+
+#endif /* CONFIG_TMTC_PUSIDS_HPP_ */

events/EventManager.cpp

@@ -1,5 +1,7 @@
 #include "EventManager.h"
 #include "EventMessage.h"
+#include <FSFWConfig.h>
+
 #include "../serviceinterface/ServiceInterfaceStream.h"
 #include "../ipc/QueueFactory.h"
 #include "../ipc/MutexFactory.h"
@@ -12,8 +14,10 @@ const uint16_t EventManager::POOL_SIZES[N_POOLS] = {
 // objects registering for certain events.
 // Each listener requires 1 or 2 EventIdMatcher and 1 or 2 ReportRangeMatcher.
 // So a good guess is 75 to a max of 100 pools required for each, which fits well.
-// SHOULDDO: Shouldn't this be in the config folder and passed via ctor?
+const uint16_t EventManager::N_ELEMENTS[N_POOLS] = {
-const uint16_t EventManager::N_ELEMENTS[N_POOLS] = { 240, 120, 120 };
+		fsfwconfig::FSFW_EVENTMGMR_MATCHTREE_NODES ,
+		fsfwconfig::FSFW_EVENTMGMT_EVENTIDMATCHERS,
+		fsfwconfig::FSFW_EVENTMGMR_RANGEMATCHERS };
 
 EventManager::EventManager(object_id_t setObjectId) :
 		SystemObject(setObjectId),

fsfw.mk

@@ -28,12 +28,25 @@ CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/*.cpp)
 # select the OS
 ifeq ($(OS_FSFW),rtems)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/rtems/*.cpp)
+
 else ifeq ($(OS_FSFW),linux)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/linux/*.cpp)
+
 else ifeq ($(OS_FSFW),freeRTOS)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/FreeRTOS/*.cpp)
+
 else ifeq ($(OS_FSFW),host)
 CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/host/*.cpp)
+ifeq ($(OS),Windows_NT)
+CXXSRC += $(wildcard $(FRAMEWORK_PATH)/osal/windows/*.cpp)
+else
+# For now, the linux UDP bridge sources needs to be included manually by upper makefile
+# for host OS because we can't be sure the OS is linux.
+# Following lines can be used to do this:
+# CXXSRC += $(FRAMEWORK_PATH)/osal/linux/TcUnixUdpPollingTask.cpp
+# CXXSRC += $(FRAMEWORK_PATH)/osal/linux/TmTcUnixUdpBridge.cpp
+endif
+
 else
 $(error invalid OS_FSFW specified, valid OS_FSFW are rtems, linux, freeRTOS, host)
 endif

health/HasHealthIF.h

@@ -1,5 +1,5 @@
-#ifndef HASHEALTHIF_H_
+#ifndef FSFW_HEALTH_HASHEALTHIF_H_
-#define HASHEALTHIF_H_
+#define FSFW_HEALTH_HASHEALTHIF_H_
 
 #include "../events/Event.h"
 #include "../returnvalues/HasReturnvaluesIF.h"
@@ -8,9 +8,13 @@
 class HasHealthIF {
 public:
 
-	typedef enum {
+	enum HealthState: uint8_t {
-		HEALTHY = 1, FAULTY = 0, EXTERNAL_CONTROL = 2, NEEDS_RECOVERY = 3, PERMANENT_FAULTY = 4
+		HEALTHY = 1,
-	} HealthState;
+		FAULTY = 0,
+		EXTERNAL_CONTROL = 2,
+		NEEDS_RECOVERY = 3,
+		PERMANENT_FAULTY = 4
+	};
 
 	static const uint8_t INTERFACE_ID = CLASS_ID::HAS_HEALTH_IF;
 	static const ReturnValue_t OBJECT_NOT_HEALTHY = MAKE_RETURN_CODE(1);
@@ -31,20 +35,17 @@ public:
 	virtual MessageQueueId_t getCommandQueue() const = 0;
 
 	/**
-	 * set the Health State
+	 * @brief   Set the Health State
-	 *
 	 * The parent will be informed, if the Health changes
-	 *
 	 * @param health
 	 */
 	virtual ReturnValue_t setHealth(HealthState health) = 0;
 
 	/**
-	 * get Health State
+	 * @brief   Get Health State
-	 *
 	 * @return  Health State of the object
 	 */
 	virtual HasHealthIF::HealthState getHealth() = 0;
 };
 
-#endif /* HASHEALTHIF_H_ */
+#endif /* FSFW_HEALTH_HASHEALTHIF_H_ */

health/HealthHelper.h

@@ -12,13 +12,15 @@
 #include "../returnvalues/HasReturnvaluesIF.h"
 
 /**
- * Helper class for Objects that implement HasHealthIF
+ * @brief   Helper class for Objects that implement HasHealthIF
+ * @details
+ * It takes care of registering with the Health Table as well as handling
+ * health commands (including replying to the sender) and updating
+ * the Health Table.
  *
- * It takes care of registering with the Health Table as well as handling health commands
+ * If a parent is set in the ctor, the parent will be informed with a
- * (including replying to the sender) and updating the Health Table.
+ * @c HEALTH_INFO message about changes in the health state.
- *
+ * Note that a @c HEALTH_INFO is only generated if the Health
- * If a parent is set in the ctor, the parent will be informed with a @c HEALTH_INFO message
- * about changes in the health state. Note that a @c HEALTH_INFO is only generated if the Health
  * changes, not for all @c HEALTH_SET commands received.
  *
  * It does NOT handle @c HEALTH_INFO messages
@@ -27,10 +29,9 @@ class HealthHelper {
 public:
 
 	/**
-	 * ctor
-	 *
 	 * @param owner
-	 * @param objectId the object Id to use when communication with the HealthTable
+	 * @param objectId      The object Id to use when communication with
+	 *                      the HealthTable
 	 */
 	HealthHelper(HasHealthIF* owner, object_id_t objectId);
 
@@ -57,7 +58,8 @@ public:
 	 * @param message
 	 * @return
 	 * -@c RETURN_OK if the message was handled
-	 * 			-@c RETURN_FAILED if the message could not be handled (ie it was not a @c HEALTH_SET or @c HEALTH_READ message)
+	 * -@c RETURN_FAILED if the message could not be handled
+	 *     (ie it was not a @c HEALTH_SET or @c HEALTH_READ message)
 	 */
 	ReturnValue_t handleHealthCommand(CommandMessage *message);
 
@@ -78,15 +80,18 @@ public:
 	HasHealthIF::HealthState getHealth();
 
 	/**
-	 * @param parentQueue the Queue id of the parent object. Set to 0 if no parent present
+	 * @param parentQueue   The queue ID of the parent object.
+	 *                      Set to 0 if no parent present
 	 */
 	void setParentQueue(MessageQueueId_t parentQueue);
 
 	/**
 	 *
-	 * @param parentQueue the Queue id of the parent object. Set to 0 if no parent present
+	 * @param parentQueue   The queue ID of the parent object.
+	 *                      Set to 0 if no parent present
 	 * @return
-	 * 			-@c RETURN_OK if the Health Table was found and the object could be registered
+	 * -@c RETURN_OK if the Health Table was found and the object
+	 * could be registered
 	 * -@c RETURN_FAILED else
 	 */
 	ReturnValue_t initialize(MessageQueueId_t parentQueue );
@@ -110,11 +115,15 @@ private:
 	HasHealthIF* owner;
 
 	/**
-	 * if the #parentQueue is not NULL, a @c HEALTH_INFO message will be sent to this queue
+	 * if the #parentQueue is not NULL, a @c HEALTH_INFO message
-	 * @param health the health is passed as parameter so that the number of calls to the health table can be minimized
+	 * will be sent to this queue
+	 * @param health
+	 * The health is passed as parameter so that the number of
+	 * calls to the health table can be minimized
 	 * @param oldHealth information of the previous health state.
 	 */
-	void informParent(HasHealthIF::HealthState health, HasHealthIF::HealthState oldHealth);
+	void informParent(HasHealthIF::HealthState health,
+	        HasHealthIF::HealthState oldHealth);
 
 	void handleSetHealthCommand(CommandMessage *message);
 };

health/HealthMessage.cpp

@@ -7,11 +7,13 @@ void HealthMessage::setHealthMessage(CommandMessage* message, Command_t command,
 	message->setParameter2(oldHealth);
 }
 
-void HealthMessage::setHealthMessage(CommandMessage* message, Command_t command) {
+void HealthMessage::setHealthMessage(CommandMessage* message,
+        Command_t command) {
 	message->setCommand(command);
 }
 
-HasHealthIF::HealthState HealthMessage::getHealth(const CommandMessage* message) {
+HasHealthIF::HealthState HealthMessage::getHealth(
+        const CommandMessage* message) {
 	return (HasHealthIF::HealthState) message->getParameter();
 }
 

health/HealthMessage.h

@@ -1,5 +1,5 @@
-#ifndef HEALTHMESSAGE_H_
+#ifndef FSFW_HEALTH_HEALTHMESSAGE_H_
-#define HEALTHMESSAGE_H_
+#define FSFW_HEALTH_HEALTHMESSAGE_H_
 
 #include "HasHealthIF.h"
 #include "../ipc/CommandMessage.h"
@@ -7,14 +7,20 @@
 class HealthMessage {
 public:
 	static const uint8_t MESSAGE_ID = messagetypes::HEALTH_COMMAND;
-	static const Command_t HEALTH_SET = MAKE_COMMAND_ID(1);//REPLY_COMMAND_OK/REPLY_REJECTED
+
-	static const Command_t HEALTH_ANNOUNCE = MAKE_COMMAND_ID(3);	//NO REPLY!
+	static const Command_t HEALTH_SET = MAKE_COMMAND_ID(1);
+	// No reply expected, health will be announced as event!
+	static const Command_t HEALTH_ANNOUNCE = MAKE_COMMAND_ID(2);
+	// Same as before, but all objects in health table will
+	// announce their health as events.
+	static const Command_t HEALTH_ANNOUNCE_ALL = MAKE_COMMAND_ID(3);
+
 	static const Command_t HEALTH_INFO = MAKE_COMMAND_ID(5);
 	static const Command_t REPLY_HEALTH_SET = MAKE_COMMAND_ID(6);
 
 	static void setHealthMessage(CommandMessage *message, Command_t command,
-			HasHealthIF::HealthState health, HasHealthIF::HealthState oldHealth = HasHealthIF::FAULTY);
+			HasHealthIF::HealthState health,
-
+			HasHealthIF::HealthState oldHealth = HasHealthIF::FAULTY);
 	static void setHealthMessage(CommandMessage *message, Command_t command);
 
 	static HasHealthIF::HealthState getHealth(const CommandMessage *message);
@@ -27,4 +33,4 @@ private:
 	HealthMessage();
 };
 
-#endif /* HEALTHMESSAGE_H_ */
+#endif /* FSFW_HEALTH_HEALTHMESSAGE_H_ */

health/HealthTable.cpp

@@ -1,6 +1,7 @@
 #include "HealthTable.h"
-#include "../serialize/SerializeAdapter.h"
+#include "../ipc/MutexHelper.h"
 #include "../ipc/MutexFactory.h"
+#include "../serialize/SerializeAdapter.h"
 
 HealthTable::HealthTable(object_id_t objectid) :
 		SystemObject(objectid) {
@@ -9,6 +10,12 @@ HealthTable::HealthTable(object_id_t objectid) :
 	mapIterator = healthMap.begin();
 }
 
+void HealthTable::setMutexTimeout(MutexIF::TimeoutType timeoutType,
+		uint32_t timeoutMs) {
+	this->timeoutType = timeoutType;
+	this->mutexTimeoutMs = timeoutMs;
+}
+
 HealthTable::~HealthTable() {
 	MutexFactory::instance()->deleteMutex(mutex);
 }
@@ -18,74 +25,63 @@ ReturnValue_t HealthTable::registerObject(object_id_t object,
 	if (healthMap.count(object) != 0) {
 		return HasReturnvaluesIF::RETURN_FAILED;
 	}
-	healthMap.insert(
+	healthMap.emplace(object, initilialState);
-			std::pair<object_id_t, HasHealthIF::HealthState>(object,
-					initilialState));
 	return HasReturnvaluesIF::RETURN_OK;
 }
 
 void HealthTable::setHealth(object_id_t object,
 		HasHealthIF::HealthState newState) {
-	mutex->lockMutex(MutexIF::BLOCKING);
+    MutexHelper(mutex, timeoutType, mutexTimeoutMs);
 	HealthMap::iterator iter = healthMap.find(object);
 	if (iter != healthMap.end()) {
 		iter->second = newState;
 	}
-	mutex->unlockMutex();
 }
 
 HasHealthIF::HealthState HealthTable::getHealth(object_id_t object) {
 	HasHealthIF::HealthState state = HasHealthIF::HEALTHY;
-	mutex->lockMutex(MutexIF::BLOCKING);
+	MutexHelper(mutex, timeoutType, mutexTimeoutMs);
 	HealthMap::iterator iter = healthMap.find(object);
 	if (iter != healthMap.end()) {
 		state = iter->second;
 	}
-	mutex->unlockMutex();
 	return state;
 }
 
-uint32_t HealthTable::getPrintSize() {
+bool HealthTable::hasHealth(object_id_t object) {
-	mutex->lockMutex(MutexIF::BLOCKING);
+	MutexHelper(mutex, timeoutType, mutexTimeoutMs);
-	uint32_t size = healthMap.size() * 5 + 2;
+	HealthMap::iterator iter = healthMap.find(object);
-	mutex->unlockMutex();
+	if (iter != healthMap.end()) {
+		return true;
+	}
+	return false;
+}
+
+size_t HealthTable::getPrintSize() {
+    MutexHelper(mutex, timeoutType, mutexTimeoutMs);
+    uint32_t size = healthMap.size() * sizeof(object_id_t) +
+            sizeof(HasHealthIF::HealthState) + sizeof(uint16_t);
     return size;
 }
 
-bool HealthTable::hasHealth(object_id_t object) {
-	bool exits = false;
-	mutex->lockMutex(MutexIF::BLOCKING);
-	HealthMap::iterator iter = healthMap.find(object);
-	if (iter != healthMap.end()) {
-		exits = true;
-	}
-	mutex->unlockMutex();
-	return exits;
-}
-
 void HealthTable::printAll(uint8_t* pointer, size_t maxSize) {
-	mutex->lockMutex(MutexIF::BLOCKING);
+    MutexHelper(mutex, timeoutType, mutexTimeoutMs);
 	size_t size = 0;
 	uint16_t count = healthMap.size();
-	ReturnValue_t result = SerializeAdapter::serialize(&count,
+	SerializeAdapter::serialize(&count,
 			&pointer, &size, maxSize, SerializeIF::Endianness::BIG);
-	HealthMap::iterator iter;
+	for (const auto& health: healthMap) {
-	for (iter = healthMap.begin();
+		SerializeAdapter::serialize(&health.first,
-			iter != healthMap.end() && result == HasReturnvaluesIF::RETURN_OK;
-			++iter) {
-		result = SerializeAdapter::serialize(&iter->first,
 				&pointer, &size, maxSize, SerializeIF::Endianness::BIG);
-		uint8_t health = iter->second;
+		uint8_t healthValue = health.second;
-		result = SerializeAdapter::serialize(&health, &pointer, &size,
+		SerializeAdapter::serialize(&healthValue, &pointer, &size,
 				maxSize, SerializeIF::Endianness::BIG);
 	}
-	mutex->unlockMutex();
 }
 
-ReturnValue_t HealthTable::iterate(
+ReturnValue_t HealthTable::iterate(HealthEntry *value, bool reset) {
-		std::pair<object_id_t, HasHealthIF::HealthState> *value, bool reset) {
 	ReturnValue_t result = HasReturnvaluesIF::RETURN_OK;
-	mutex->lockMutex(MutexIF::BLOCKING);
+	MutexHelper(mutex, timeoutType, mutexTimeoutMs);
 	if (reset) {
 		mapIterator = healthMap.begin();
 	}
@@ -94,7 +90,5 @@ ReturnValue_t HealthTable::iterate(
 	}
 	*value = *mapIterator;
 	mapIterator++;
-	mutex->unlockMutex();
-
 	return result;
 }

health/HealthTable.h

@@ -1,35 +1,47 @@
-#ifndef HEALTHTABLE_H_
+#ifndef FSFW_HEALTH_HEALTHTABLE_H_
-#define HEALTHTABLE_H_
+#define FSFW_HEALTH_HEALTHTABLE_H_
 
 #include "HealthTableIF.h"
 #include "../objectmanager/SystemObject.h"
 #include "../ipc/MutexIF.h"
 #include <map>
 
-typedef std::map<object_id_t, HasHealthIF::HealthState> HealthMap;
 
 class HealthTable: public HealthTableIF, public SystemObject {
 public:
 	HealthTable(object_id_t objectid);
 	virtual ~HealthTable();
 
+	void setMutexTimeout(MutexIF::TimeoutType timeoutType, uint32_t timeoutMs);
+
+    /** HealthTableIF overrides */
     virtual ReturnValue_t registerObject(object_id_t object,
-			HasHealthIF::HealthState initilialState = HasHealthIF::HEALTHY);
+            HasHealthIF::HealthState initilialState =
+            HasHealthIF::HEALTHY) override;
+    virtual size_t getPrintSize() override;
+    virtual void printAll(uint8_t *pointer, size_t maxSize) override;
 
-	virtual bool hasHealth(object_id_t object);
+	/** ManagesHealthIF overrides */
-	virtual void setHealth(object_id_t object, HasHealthIF::HealthState newState);
+	virtual bool hasHealth(object_id_t object) override;
-	virtual HasHealthIF::HealthState getHealth(object_id_t);
+	virtual void setHealth(object_id_t object,
-
+	        HasHealthIF::HealthState newState) override;
-	virtual uint32_t getPrintSize();
+	virtual HasHealthIF::HealthState getHealth(object_id_t) override;
-	virtual void printAll(uint8_t *pointer, size_t maxSize);
 
 protected:
+	using HealthMap = std::map<object_id_t, HasHealthIF::HealthState>;
+	using HealthEntry = std::pair<object_id_t, HasHealthIF::HealthState>;
+
 	MutexIF* mutex;
+	MutexIF::TimeoutType timeoutType = MutexIF::TimeoutType::WAITING;
+	uint32_t mutexTimeoutMs = 20;
+
 	HealthMap healthMap;
 
 	HealthMap::iterator mapIterator;
 
-	virtual ReturnValue_t iterate(std::pair<object_id_t,HasHealthIF::HealthState> *value, bool reset = false);
+	virtual ReturnValue_t iterate(
+	        HealthEntry* value,
+	        bool reset = false) override;
 };
 
-#endif /* HEALTHTABLE_H_ */
+#endif /* FSFW_HEALTH_HEALTHTABLE_H_ */

health/HealthTableIF.h

@@ -1,26 +1,24 @@
-#ifndef HEALTHTABLEIF_H_
+#ifndef FSFW_HEALTH_HEALTHTABLEIF_H_
-#define HEALTHTABLEIF_H_
+#define FSFW_HEALTH_HEALTHTABLEIF_H_
 
 #include "ManagesHealthIF.h"
 #include "../objectmanager/ObjectManagerIF.h"
 #include "../returnvalues/HasReturnvaluesIF.h"
-#include <map>
-
 
 class HealthTableIF: public ManagesHealthIF {
-	friend class HealthCommandingService;
 public:
-	virtual ~HealthTableIF() {
+	virtual ~HealthTableIF() {}
-	}
 
 	virtual ReturnValue_t registerObject(object_id_t object,
 			HasHealthIF::HealthState initilialState = HasHealthIF::HEALTHY) = 0;
 
-	virtual uint32_t getPrintSize() = 0;
+	virtual size_t getPrintSize() = 0;
 	virtual void printAll(uint8_t *pointer, size_t maxSize) = 0;
 
 protected:
-	virtual ReturnValue_t iterate(std::pair<object_id_t,HasHealthIF::HealthState> *value, bool reset = false) = 0;
+	virtual ReturnValue_t iterate(
+	        std::pair<object_id_t,HasHealthIF::HealthState> *value,
+	        bool reset = false) = 0;
 };
 
-#endif /* HEALTHTABLEIF_H_ */
+#endif /* FRAMEWORK_HEALTH_HEALTHTABLEIF_H_ */

health/ManagesHealthIF.h

@@ -1,8 +1,9 @@
-#ifndef FRAMEWORK_HEALTH_MANAGESHEALTHIF_H_
+#ifndef FSFW_HEALTH_MANAGESHEALTHIF_H_
-#define FRAMEWORK_HEALTH_MANAGESHEALTHIF_H_
+#define FSFW_HEALTH_MANAGESHEALTHIF_H_
 
 #include "HasHealthIF.h"
 #include "../objectmanager/ObjectManagerIF.h"
+
 class ManagesHealthIF {
 public:
 	virtual ~ManagesHealthIF() {
@@ -49,4 +50,4 @@ public:
 	}
 };
 
-#endif /* FRAMEWORK_HEALTH_MANAGESHEALTHIF_H_ */
+#endif /* FSFW_HEALTH_MANAGESHEALTHIF_H_ */

osal/host/QueueFactory.cpp

@@ -1,6 +1,11 @@
+
+#include "MessageQueue.h"
+
+#include "../../ipc/MessageQueueSenderIF.h"
+#include "../../ipc/MessageQueueMessageIF.h"
 #include "../../ipc/QueueFactory.h"
-#include "../../osal/host/MessageQueue.h"
 #include "../../serviceinterface/ServiceInterfaceStream.h"
+
 #include <cstring>
 
 QueueFactory* QueueFactory::factoryInstance = nullptr;

osal/windows/TcWinUdpPollingTask.cpp

@@ -0,0 +1,148 @@
+#include "TcWinUdpPollingTask.h"
+#include "../../globalfunctions/arrayprinter.h"
+#include "../../serviceinterface/ServiceInterfaceStream.h"
+
+#include <winsock2.h>
+#include <windows.h>
+
+TcWinUdpPollingTask::TcWinUdpPollingTask(object_id_t objectId,
+		object_id_t tmtcUnixUdpBridge, size_t frameSize,
+		double timeoutSeconds): SystemObject(objectId),
+		tmtcBridgeId(tmtcUnixUdpBridge) {
+	if(frameSize > 0) {
+		this->frameSize = frameSize;
+	}
+	else {
+		this->frameSize = DEFAULT_MAX_FRAME_SIZE;
+	}
+
+	// Set up reception buffer with specified frame size.
+	// For now, it is assumed that only one frame is held in the buffer!
+	receptionBuffer.reserve(this->frameSize);
+	receptionBuffer.resize(this->frameSize);
+
+	if(timeoutSeconds == -1) {
+		receptionTimeout = DEFAULT_TIMEOUT;
+	}
+	else {
+		receptionTimeout = timevalOperations::toTimeval(timeoutSeconds);
+	}
+}
+
+TcWinUdpPollingTask::~TcWinUdpPollingTask() {}
+
+ReturnValue_t TcWinUdpPollingTask::performOperation(uint8_t opCode) {
+	// Poll for new UDP datagrams in permanent loop.
+	while(true) {
+		//! Sender Address is cached here.
+		struct sockaddr_in senderAddress;
+		int senderAddressSize = sizeof(senderAddress);
+		ssize_t bytesReceived = recvfrom(serverUdpSocket,
+				reinterpret_cast<char*>(receptionBuffer.data()), frameSize,
+				receptionFlags, reinterpret_cast<sockaddr*>(&senderAddress),
+				&senderAddressSize);
+		if(bytesReceived == SOCKET_ERROR) {
+			// handle error
+			sif::error << "TcWinUdpPollingTask::performOperation: Reception"
+					" error." << std::endl;
+			handleReadError();
+			continue;
+		}
+		//sif::debug << "TcWinUdpPollingTask::performOperation: " << bytesReceived
+		//		<< " bytes received" << std::endl;
+
+		ReturnValue_t result = handleSuccessfullTcRead(bytesReceived);
+		if(result != HasReturnvaluesIF::RETURN_FAILED) {
+
+		}
+		tmtcBridge->registerCommConnect();
+		tmtcBridge->checkAndSetClientAddress(senderAddress);
+	}
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+
+ReturnValue_t TcWinUdpPollingTask::handleSuccessfullTcRead(size_t bytesRead) {
+	store_address_t storeId;
+	ReturnValue_t result = tcStore->addData(&storeId,
+			receptionBuffer.data(), bytesRead);
+	// arrayprinter::print(receptionBuffer.data(), bytesRead);
+	if (result != HasReturnvaluesIF::RETURN_OK) {
+		sif::error << "TcSerialPollingTask::transferPusToSoftwareBus: Data "
+				"storage failed" << std::endl;
+		sif::error << "Packet size: " << bytesRead << std::endl;
+		return HasReturnvaluesIF::RETURN_FAILED;
+	}
+
+	TmTcMessage message(storeId);
+
+	result  = MessageQueueSenderIF::sendMessage(targetTcDestination, &message);
+	if (result != HasReturnvaluesIF::RETURN_OK) {
+		sif::error << "Serial Polling: Sending message to queue failed"
+				<< std::endl;
+		tcStore->deleteData(storeId);
+	}
+	return result;
+}
+
+ReturnValue_t TcWinUdpPollingTask::initialize() {
+	tcStore = objectManager->get<StorageManagerIF>(objects::TC_STORE);
+	if (tcStore == nullptr) {
+		sif::error << "TcSerialPollingTask::initialize: TC Store uninitialized!"
+				<< std::endl;
+		return ObjectManagerIF::CHILD_INIT_FAILED;
+	}
+
+	tmtcBridge = objectManager->get<TmTcWinUdpBridge>(tmtcBridgeId);
+	if(tmtcBridge == nullptr) {
+		sif::error << "TcSocketPollingTask::TcSocketPollingTask: Invalid"
+				" TMTC bridge object!" << std::endl;
+		return ObjectManagerIF::CHILD_INIT_FAILED;
+	}
+
+	serverUdpSocket = tmtcBridge->serverSocket;
+	//sif::info << "TcWinUdpPollingTask::initialize: Server UDP socket "
+	//        << serverUdpSocket << std::endl;
+
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+ReturnValue_t TcWinUdpPollingTask::initializeAfterTaskCreation() {
+	// Initialize the destination after task creation. This ensures
+	// that the destination has already been set in the TMTC bridge.
+	targetTcDestination = tmtcBridge->getRequestQueue();
+	return HasReturnvaluesIF::RETURN_OK;
+}
+
+void TcWinUdpPollingTask::setTimeout(double timeoutSeconds) {
+	DWORD timeoutMs = timeoutSeconds * 1000.0;
+	int result = setsockopt(serverUdpSocket, SOL_SOCKET, SO_RCVTIMEO,
+			reinterpret_cast<const char*>(&timeoutMs), sizeof(DWORD));
+	if(result == -1) {
+		sif::error << "TcSocketPollingTask::TcSocketPollingTask: Setting "
+				"receive timeout failed with " << strerror(errno) << std::endl;
+	}
+}
+
+void TcWinUdpPollingTask::handleReadError() {
+    int error = WSAGetLastError();
+    switch(error) {
+    case(WSANOTINITIALISED): {
+        sif::info << "TmTcWinUdpBridge::handleReadError: WSANOTINITIALISED: "
+                << "WSAStartup(...) call " << "necessary" << std::endl;
+        break;
+    }
+    case(WSAEFAULT): {
+        sif::info << "TmTcWinUdpBridge::handleReadError: WSADEFAULT: "
+                << "Bad address " << std::endl;
+        break;
+    }
+    default: {
+        sif::info << "TmTcWinUdpBridge::handleReadError: Error code: "
+                << error << std::endl;
+        break;
+    }
+    }
+    // to prevent spam.
+    Sleep(1000);
+}

osal/windows/TcWinUdpPollingTask.h

@@ -0,0 +1,67 @@
+#ifndef FSFW_OSAL_WINDOWS_TCSOCKETPOLLINGTASK_H_
+#define FSFW_OSAL_WINDOWS_TCSOCKETPOLLINGTASK_H_
+
+#include "TmTcWinUdpBridge.h"
+#include "../../objectmanager/SystemObject.h"
+#include "../../tasks/ExecutableObjectIF.h"
+#include "../../storagemanager/StorageManagerIF.h"
+
+#include <vector>
+
+/**
+ * @brief 	This class can be used to implement the polling of a Unix socket,
+ * 			using UDP for now.
+ * @details
+ * The task will be blocked while the specified number of bytes has not been
+ * received, so TC reception is handled inside a separate task.
+ * This class caches the IP address of the sender. It is assumed there
+ * is only one sender for now.
+ */
+class TcWinUdpPollingTask: public SystemObject,
+		public ExecutableObjectIF {
+	friend class TmTcWinUdpBridge;
+public:
+	static constexpr size_t DEFAULT_MAX_FRAME_SIZE = 2048;
+	//! 0.5  default milliseconds timeout for now.
+	static constexpr timeval DEFAULT_TIMEOUT = {.tv_sec = 0, .tv_usec = 500};
+
+	TcWinUdpPollingTask(object_id_t objectId, object_id_t tmtcUnixUdpBridge,
+			size_t frameSize = 0, double timeoutSeconds = -1);
+	virtual~ TcWinUdpPollingTask();
+
+	/**
+	 * Turn on optional timeout for UDP polling. In the default mode,
+	 * the receive function will block until a packet is received.
+	 * @param timeoutSeconds
+	 */
+	void setTimeout(double timeoutSeconds);
+
+	virtual ReturnValue_t performOperation(uint8_t opCode) override;
+	virtual ReturnValue_t initialize() override;
+	virtual ReturnValue_t initializeAfterTaskCreation() override;
+
+protected:
+	StorageManagerIF* tcStore = nullptr;
+
+private:
+	//! TMTC bridge is cached.
+	object_id_t tmtcBridgeId = objects::NO_OBJECT;
+	TmTcWinUdpBridge* tmtcBridge = nullptr;
+	MessageQueueId_t targetTcDestination = MessageQueueIF::NO_QUEUE;
+	//! Reception flags: https://linux.die.net/man/2/recvfrom.
+	int receptionFlags = 0;
+
+	//! Server socket, which is member of TMTC bridge and is assigned in
+	//! constructor
+	SOCKET serverUdpSocket = 0;
+
+	std::vector<uint8_t> receptionBuffer;
+
+	size_t frameSize = 0;
+	timeval receptionTimeout;
+
+	ReturnValue_t handleSuccessfullTcRead(size_t bytesRead);
+	void handleReadError();
+};
+
+#endif /* FRAMEWORK_OSAL_LINUX_TCSOCKETPOLLINGTASK_H_ */

osal/windows/TmTcWinUdpBridge.cpp

@@ -0,0 +1,176 @@
+#include <fsfw/ipc/MutexHelper.h>
+#include "TmTcWinUdpBridge.h"
+
+TmTcWinUdpBridge::TmTcWinUdpBridge(object_id_t objectId,
+        object_id_t tcDestination, object_id_t tmStoreId, object_id_t tcStoreId,
+        uint16_t serverPort, uint16_t clientPort):
+        TmTcBridge(objectId, tcDestination, tmStoreId, tcStoreId) {
+    mutex = MutexFactory::instance()->createMutex();
+
+    // Initiates Winsock DLL.
+    WSAData wsaData;
+    WORD wVersionRequested = MAKEWORD(2, 2);
+    int err = WSAStartup(wVersionRequested, &wsaData);
+    if (err != 0) {
+        /* Tell the user that we could not find a usable */
+        /* Winsock DLL.                                  */
+        sif::error << "TmTcWinUdpBridge::TmTcWinUdpBridge:"
+                "WSAStartup failed with error: " << err << std::endl;
+        return;
+    }
+
+    uint16_t setServerPort = DEFAULT_UDP_SERVER_PORT;
+    if(serverPort != 0xFFFF) {
+        setServerPort = serverPort;
+    }
+
+    uint16_t setClientPort = DEFAULT_UDP_CLIENT_PORT;
+    if(clientPort != 0xFFFF) {
+        setClientPort = clientPort;
+    }
+
+    // Set up UDP socket: https://man7.org/linux/man-pages/man7/ip.7.html
+    //clientSocket = socket(AF_INET, SOCK_DGRAM, 0);
+    serverSocket = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
+    if(serverSocket == INVALID_SOCKET) {
+        sif::error << "TmTcWinUdpBridge::TmTcWinUdpBridge: Could not open"
+                " UDP socket!" << std::endl;
+        handleSocketError();
+        return;
+    }
+
+    serverAddress.sin_family = AF_INET;
+
+    // Accept packets from any interface. (potentially insecure).
+    serverAddress.sin_addr.s_addr = htonl(INADDR_ANY);
+    serverAddress.sin_port = htons(setServerPort);
+    serverAddressLen = sizeof(serverAddress);
+    setsockopt(serverSocket, SOL_SOCKET, SO_REUSEADDR,
+            reinterpret_cast<const char*>(&serverSocketOptions),
+            sizeof(serverSocketOptions));
+
+    clientAddress.sin_family = AF_INET;
+    clientAddress.sin_addr.s_addr = htonl(INADDR_ANY);
+    clientAddress.sin_port = htons(setClientPort);
+    clientAddressLen = sizeof(clientAddress);
+
+    int result = bind(serverSocket,
+            reinterpret_cast<struct sockaddr*>(&serverAddress),
+            serverAddressLen);
+    if(result != 0) {
+        sif::error << "TmTcWinUdpBridge::TmTcWinUdpBridge: Could not bind "
+                "local port " << setServerPort << " to server socket!"
+                << std::endl;
+        handleBindError();
+    }
+}
+
+TmTcWinUdpBridge::~TmTcWinUdpBridge() {
+    WSACleanup();
+}
+
+ReturnValue_t TmTcWinUdpBridge::sendTm(const uint8_t *data, size_t dataLen) {
+    int flags = 0;
+
+    //clientAddress.sin_addr.s_addr = htons(INADDR_ANY);
+    //clientAddressLen = sizeof(serverAddress);
+
+//  char ipAddress [15];
+//  sif::debug << "IP Address Sender: "<< inet_ntop(AF_INET,
+//                  &clientAddress.sin_addr.s_addr, ipAddress, 15) << std::endl;
+
+    ssize_t bytesSent = sendto(serverSocket,
+            reinterpret_cast<const char*>(data), dataLen, flags,
+            reinterpret_cast<sockaddr*>(&clientAddress), clientAddressLen);
+    if(bytesSent == SOCKET_ERROR) {
+        sif::error << "TmTcWinUdpBridge::sendTm: Send operation failed."
+                << std::endl;
+        handleSendError();
+    }
+//  sif::debug << "TmTcUnixUdpBridge::sendTm: " << bytesSent << " bytes were"
+//          " sent." << std::endl;
+    return HasReturnvaluesIF::RETURN_OK;
+    return HasReturnvaluesIF::RETURN_OK;
+}
+
+void TmTcWinUdpBridge::checkAndSetClientAddress(sockaddr_in newAddress) {
+    MutexHelper lock(mutex, MutexIF::TimeoutType::WAITING, 10);
+
+//  char ipAddress [15];
+//  sif::debug << "IP Address Sender: "<< inet_ntop(AF_INET,
+//          &newAddress.sin_addr.s_addr, ipAddress, 15) << std::endl;
+//  sif::debug << "IP Address Old: " <<  inet_ntop(AF_INET,
+//          &clientAddress.sin_addr.s_addr, ipAddress, 15) << std::endl;
+
+    // Set new IP address if it has changed.
+    if(clientAddress.sin_addr.s_addr != newAddress.sin_addr.s_addr) {
+        clientAddress.sin_addr.s_addr = newAddress.sin_addr.s_addr;
+        clientAddressLen = sizeof(clientAddress);
+    }
+}
+
+void TmTcWinUdpBridge::handleSocketError() {
+    int errCode = WSAGetLastError();
+    switch(errCode) {
+    case(WSANOTINITIALISED): {
+        sif::info << "TmTcWinUdpBridge::handleSocketError: WSANOTINITIALISED: "
+                << "WSAStartup(...) call " << "necessary" << std::endl;
+        break;
+    }
+    default: {
+        /*
+        https://docs.microsoft.com/en-us/windows/win32/winsock/
+        windows-sockets-error-codes-2
+         */
+        sif::info << "TmTcWinUdpBridge::handleSocketError: Error code: "
+                << errCode << std::endl;
+        break;
+    }
+    }
+}
+
+void TmTcWinUdpBridge::handleBindError() {
+    int errCode = WSAGetLastError();
+    switch(errCode) {
+    case(WSANOTINITIALISED): {
+        sif::info << "TmTcWinUdpBridge::handleBindError: WSANOTINITIALISED: "
+                << "WSAStartup(...) call " << "necessary" << std::endl;
+        break;
+    }
+    default: {
+        /*
+        https://docs.microsoft.com/en-us/windows/win32/winsock/
+        windows-sockets-error-codes-2
+        */
+        sif::info << "TmTcWinUdpBridge::handleBindError: Error code: "
+                << errCode << std::endl;
+        break;
+    }
+    }
+}
+
+void TmTcWinUdpBridge::handleSendError() {
+    int errCode = WSAGetLastError();
+    switch(errCode) {
+    case(WSANOTINITIALISED): {
+        sif::info << "TmTcWinUdpBridge::handleSendError: WSANOTINITIALISED: "
+                << "WSAStartup(...) call " << "necessary" << std::endl;
+        break;
+    }
+    case(WSAEADDRNOTAVAIL): {
+        sif::info << "TmTcWinUdpBridge::handleReadError: WSAEADDRNOTAVAIL: "
+                << "Check target address. " << std::endl;
+        break;
+    }
+    default: {
+        /*
+        https://docs.microsoft.com/en-us/windows/win32/winsock/
+        windows-sockets-error-codes-2
+        */
+        sif::info << "TmTcWinUdpBridge::handleSendError: Error code: "
+                << errCode << std::endl;
+        break;
+    }
+    }
+}
+

osal/windows/TmTcWinUdpBridge.h

@@ -0,0 +1,49 @@
+#ifndef FSFW_OSAL_WINDOWS_TMTCWINUDPBRIDGE_H_
+#define FSFW_OSAL_WINDOWS_TMTCWINUDPBRIDGE_H_
+
+#include "../../tmtcservices/TmTcBridge.h"
+
+#include <winsock2.h>
+#include <windows.h>
+
+class TmTcWinUdpBridge: public TmTcBridge {
+    friend class TcWinUdpPollingTask;
+public:
+    // The ports chosen here should not be used by any other process.
+    static constexpr uint16_t DEFAULT_UDP_SERVER_PORT = 7301;
+    static constexpr uint16_t DEFAULT_UDP_CLIENT_PORT = 7302;
+
+    TmTcWinUdpBridge(object_id_t objectId, object_id_t tcDestination,
+            object_id_t tmStoreId, object_id_t tcStoreId,
+            uint16_t serverPort = 0xFFFF,uint16_t clientPort = 0xFFFF);
+    virtual~ TmTcWinUdpBridge();
+
+    void checkAndSetClientAddress(sockaddr_in clientAddress);
+
+protected:
+    virtual ReturnValue_t sendTm(const uint8_t * data, size_t dataLen) override;
+
+private:
+    SOCKET serverSocket = 0;
+
+    const int serverSocketOptions = 0;
+
+    struct sockaddr_in clientAddress;
+    int clientAddressLen = 0;
+
+    struct sockaddr_in serverAddress;
+    int serverAddressLen = 0;
+
+    //! Access to the client address is mutex protected as it is set
+    //! by another task.
+    MutexIF* mutex;
+
+    void handleSocketError();
+    void handleBindError();
+    void handleSendError();
+};
+
+
+
+#endif /* FSFW_OSAL_HOST_TMTCWINUDPBRIDGE_H_ */
+

returnvalues/HasReturnvaluesIF.h

@@ -1,5 +1,5 @@
-#ifndef FRAMEWORK_RETURNVALUES_HASRETURNVALUESIF_H_
+#ifndef FSFW_RETURNVALUES_HASRETURNVALUESIF_H_
-#define FRAMEWORK_RETURNVALUES_HASRETURNVALUESIF_H_
+#define FSFW_RETURNVALUES_HASRETURNVALUESIF_H_
 
 #include "FwClassIds.h"
 #include <returnvalues/classIds.h>
@@ -15,9 +15,17 @@ public:
 	static const ReturnValue_t RETURN_FAILED = 1;
 	virtual ~HasReturnvaluesIF() {}
 
-	static ReturnValue_t makeReturnCode(uint8_t interfaceId, uint8_t number) {
+	/**
-	    return (interfaceId << 8) + number;
+	 * It is discouraged to use the input parameters 0,0 and 0,1 as this
+	 * will generate the RETURN_OK and RETURN_FAILED returnvalues.
+	 * @param interfaceId
+	 * @param number
+	 * @return
+	 */
+	static constexpr ReturnValue_t makeReturnCode(uint8_t interfaceId,
+			uint8_t number) {
+	    return (static_cast<ReturnValue_t>(interfaceId) << 8) + number;
 	}
 };
 
-#endif /* FRAMEWORK_RETURNVALUES_HASRETURNVALUESIF_H_ */
+#endif /* FSFW_RETURNVALUES_HASRETURNVALUESIF_H_ */

timemanager/CCSDSTime.cpp

@@ -1,8 +1,9 @@
-#include "../timemanager/CCSDSTime.h"
+#include "CCSDSTime.h"
+
 #include <cstdio>
 #include <cinttypes>
 #include <cmath>
-
+#include <FSFWConfig.h>
 
 CCSDSTime::CCSDSTime() {
 }
@@ -158,15 +159,16 @@ ReturnValue_t CCSDSTime::convertFromASCII(Clock::TimeOfDay_t* to, const uint8_t*
 	}
 // Newlib nano can't parse uint8, see SCNu8 documentation and https://sourceware.org/newlib/README
 // Suggestion: use uint16 all the time. This should work on all systems.
-#ifdef NEWLIB_NANO_NO_C99_IO
+#if FSFW_NO_C99_IO == 1
 	uint16_t year;
 	uint16_t month;
 	uint16_t day;
 	uint16_t hour;
 	uint16_t minute;
 	float second;
-	int count = sscanf((char *) from, "%4" SCNu16 "-%2" SCNu16 "-%2" SCNu16 "T%2" SCNu16 ":%2" SCNu16 ":%fZ", &year,
+	int count = sscanf((char *) from, "%4" SCNu16 "-%2" SCNu16 "-%2" SCNu16 "T%"
-				&month, &day, &hour, &minute, &second);
+	        "2" SCNu16 ":%2" SCNu16 ":%fZ", &year, &month, &day, &hour,
+	        &minute, &second);
 	if (count == 6) {
 		to->year = year;
 		to->month = month;
@@ -179,12 +181,13 @@ ReturnValue_t CCSDSTime::convertFromASCII(Clock::TimeOfDay_t* to, const uint8_t*
 	}
 
 	// try Code B (yyyy-ddd)
-	count = sscanf((char *) from, "%4" SCNu16 "-%3" SCNu16 "T%2" SCNu16 ":%2" SCNu16 ":%fZ", &year, &day,
+	count = sscanf((char *) from, "%4" SCNu16 "-%3" SCNu16 "T%2" SCNu16 ":%"
-			&hour, &minute, &second);
+	        "2" SCNu16 ":%fZ", &year, &day, &hour, &minute, &second);
 	if (count == 5) {
 		uint8_t tempDay;
 		ReturnValue_t result = CCSDSTime::convertDaysOfYear(day, year,
-				reinterpret_cast<uint8_t *>(&month), reinterpret_cast<uint8_t *>(&tempDay));
+				reinterpret_cast<uint8_t *>(&month),
+				reinterpret_cast<uint8_t *>(&tempDay));
 		if (result != RETURN_OK) {
 			return RETURN_FAILED;
 		}

unittest/README.md

@@ -8,6 +8,16 @@ run in the terminal or in eclipse.
 
 ### Instructions
 
+To run the fsfw unittests in the project, perform following steps:
+
+1. Copy the testcfg folder  the project root (folder containing the FSFW).
+2. There is a makefile inside the testcfg folder which can be used to have 
+   a starting point to compile the unit tests. Copy that Makefile to the project
+   root
+3. Create a folder named catch2 (can have other name which requires Makefile 
+   adaption) and copy the Catch2 header files there (NOTE: CMake support
+   not enabled yet!)
+   
 ### Eclipse CDT settings
 
 The default eclipse terminal has issues displaying the colors used

unittest/testcfg/cdatapool/dataPoolInit.h

@@ -1,7 +1,7 @@
 #ifndef HOSTED_CONFIG_CDATAPOOL_DATAPOOLINIT_H_
 #define HOSTED_CONFIG_CDATAPOOL_DATAPOOLINIT_H_
 
-#include <fsfw/datapoolglob/GlobalDataPool.h>
+#include <fsfw/datapool/DataPool.h>
 #include <fsfw/datapool/PoolEntryIF.h>
 #include <map>
 #include <cstdint>