hal/CMakeLists.txt

@@ -9,6 +9,7 @@ option(FSFW_HAL_ADD_LINUX "Add the Linux HAL to the sources. Requires gpiod libr
 # Linux. The only exception from this is the gpiod library which requires a dedicated installation,
 # but CMake is able to determine whether this library is installed with find_library.
 option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add peripheral drivers for embedded Linux" ON)
+option(FSFW_HAL_LINUX_ADD_LIBGPIOD "Target implements libgpiod" ON)
 
 option(FSFW_HAL_ADD_RASPBERRY_PI "Add Raspberry Pi specific code to the sources" OFF)
 option(FSFW_HAL_ADD_STM32H7 "Add the STM32H7 HAL to the sources" OFF)

hal/src/fsfw_hal/linux/CMakeLists.txt

@@ -9,7 +9,9 @@ target_sources(${LIB_FSFW_NAME} PRIVATE
 )
 
 if(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS)
+if(FSFW_HAL_LINUX_ADD_LIBGPIOD)
 	add_subdirectory(gpio)
+endif()
 	add_subdirectory(spi)
 	add_subdirectory(i2c)
 	add_subdirectory(uart)

hal/src/fsfw_hal/linux/uart/UartComIF.cpp

@@ -269,6 +269,50 @@ void UartComIF::configureBaudrate(struct termios* options, UartCookie* uartCooki
       cfsetispeed(options, B460800);
       cfsetospeed(options, B460800);
       break;
+    case 500000:
+      cfsetispeed(options, B500000);
+      cfsetospeed(options, B500000);
+      break;
+    case 576000:
+      cfsetispeed(options, B576000);
+      cfsetospeed(options, B576000);
+      break;
+    case 921600:
+      cfsetispeed(options, B921600);
+      cfsetospeed(options, B921600);
+      break;
+    case 1000000:
+      cfsetispeed(options, B1000000);
+      cfsetospeed(options, B1000000);
+      break;
+    case 1152000:
+      cfsetispeed(options, B1152000);
+      cfsetospeed(options, B1152000);
+      break;
+    case 1500000:
+      cfsetispeed(options, B1500000);
+      cfsetospeed(options, B1500000);
+      break;
+    case 2000000:
+      cfsetispeed(options, B2000000);
+      cfsetospeed(options, B2000000);
+      break;
+    case 2500000:
+      cfsetispeed(options, B2500000);
+      cfsetospeed(options, B2500000);
+      break;
+    case 3000000:
+      cfsetispeed(options, B3000000);
+      cfsetospeed(options, B3000000);
+      break;
+    case 3500000:
+      cfsetispeed(options, B3500000);
+      cfsetospeed(options, B3500000);
+      break;
+    case 4000000:
+      cfsetispeed(options, B4000000);
+      cfsetospeed(options, B4000000);
+      break;
     default:
 #if FSFW_CPP_OSTREAM_ENABLED == 1
       sif::warning << "UartComIF::configureBaudrate: Baudrate not supported" << std::endl;

src/fsfw/rmap/RMAPChannelIF.h

@@ -77,9 +77,9 @@ class RMAPChannelIF {
    * command; command was not sent
    *      - @c COMMAND_BUFFER_FULL				no receiver buffer available for
    * expected len; command was not sent
-   *      - @c COMMAND_TOO_BIG					the data that was to be sent was too long for
+   *      - @c COMMAND_TOO_BIG					the data that was to be sent was too long
-   * the hw to handle (write command) or the expected len was bigger than maximal expected len (read
+   * for the hw to handle (write command) or the expected len was bigger than maximal expected len
-   * command) command was not sent
+   * (read command) command was not sent
    *      - @c COMMAND_CHANNEL_DEACTIVATED		the channel has no port set
    *      - @c NOT_SUPPORTED						if you dont feel like
    * implementing something...