Update FSFW #33

Merged
meierj merged 75 commits from mueller/master into eive/develop 2022-02-21 11:00:17 +01:00
4 changed files with 50 additions and 3 deletions
Showing only changes of commit c4a055986c - Show all commits

View File

@ -9,6 +9,7 @@ option(FSFW_HAL_ADD_LINUX "Add the Linux HAL to the sources. Requires gpiod libr
# Linux. The only exception from this is the gpiod library which requires a dedicated installation,
# but CMake is able to determine whether this library is installed with find_library.
option(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS "Add peripheral drivers for embedded Linux" ON)
option(FSFW_HAL_LINUX_ADD_LIBGPIOD "Target implements libgpiod" ON)
option(FSFW_HAL_ADD_RASPBERRY_PI "Add Raspberry Pi specific code to the sources" OFF)
option(FSFW_HAL_ADD_STM32H7 "Add the STM32H7 HAL to the sources" OFF)

View File

@ -9,7 +9,9 @@ target_sources(${LIB_FSFW_NAME} PRIVATE
)
if(FSFW_HAL_LINUX_ADD_PERIPHERAL_DRIVERS)
if(FSFW_HAL_LINUX_ADD_LIBGPIOD)
add_subdirectory(gpio)
endif()
add_subdirectory(spi)
add_subdirectory(i2c)
add_subdirectory(uart)

View File

@ -269,6 +269,50 @@ void UartComIF::configureBaudrate(struct termios* options, UartCookie* uartCooki
cfsetispeed(options, B460800);
cfsetospeed(options, B460800);
break;
case 500000:
cfsetispeed(options, B500000);
cfsetospeed(options, B500000);
break;
case 576000:
cfsetispeed(options, B576000);
cfsetospeed(options, B576000);
break;
case 921600:
cfsetispeed(options, B921600);
cfsetospeed(options, B921600);
break;
case 1000000:
cfsetispeed(options, B1000000);
cfsetospeed(options, B1000000);
break;
case 1152000:
cfsetispeed(options, B1152000);
cfsetospeed(options, B1152000);
break;
case 1500000:
cfsetispeed(options, B1500000);
cfsetospeed(options, B1500000);
break;
case 2000000:
cfsetispeed(options, B2000000);
cfsetospeed(options, B2000000);
break;
case 2500000:
cfsetispeed(options, B2500000);
cfsetospeed(options, B2500000);
break;
case 3000000:
cfsetispeed(options, B3000000);
cfsetospeed(options, B3000000);
break;
case 3500000:
cfsetispeed(options, B3500000);
cfsetospeed(options, B3500000);
break;
case 4000000:
cfsetispeed(options, B4000000);
cfsetospeed(options, B4000000);
break;
default:
#if FSFW_CPP_OSTREAM_ENABLED == 1
sif::warning << "UartComIF::configureBaudrate: Baudrate not supported" << std::endl;

View File

@ -77,9 +77,9 @@ class RMAPChannelIF {
* command; command was not sent
* - @c COMMAND_BUFFER_FULL no receiver buffer available for
* expected len; command was not sent
* - @c COMMAND_TOO_BIG the data that was to be sent was too
* long for the hw to handle (write command) or the expected len was bigger than maximal expected
* len (read command) command was not sent
* - @c COMMAND_TOO_BIG the data that was to be sent was too long
* for the hw to handle (write command) or the expected len was bigger than maximal expected len
* (read command) command was not sent
* - @c COMMAND_CHANNEL_DEACTIVATED the channel has no port set
* - @c NOT_SUPPORTED if you dont feel like
* implementing something...