fsfw/unittest/user/testcfg/Makefile-FSFW-Tests

417 lines
13 KiB
Plaintext

#-------------------------------------------------------------------------------
# Makefile for FSFW Test
#-------------------------------------------------------------------------------
# User-modifiable options
#-------------------------------------------------------------------------------
# Fundamentals on the build process of C/C++ Software:
# https://www3.ntu.edu.sg/home/ehchua/programming/cpp/gcc_make.html
# Make documentation: https://www.gnu.org/software/make/manual/make.pdf
# Online: https://www.gnu.org/software/make/manual/make.html
# General rules: http://make.mad-scientist.net/papers/rules-of-makefiles/#rule3
SHELL = /bin/sh
# Chip & board used for compilation
# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
# Unit Test can only be run on host machine for now (Linux)
FRAMEWORK_PATH = fsfw
TEST_FILE_ROOT = $(FRAMEWORK_PATH)/unittest
BOARD = unittest
LINUX = 1
OS_FSFW = linux
CUSTOM_DEFINES += -D$(OS_FSFW)
# Copied from stackoverflow, can be used to differentiate between Windows
# and Linux
ifeq ($(OS),Windows_NT)
CUSTOM_DEFINES += -DWIN32
ifeq ($(PROCESSOR_ARCHITEW6432),AMD64)
CUSTOM_DEFINES += -DAMD64
else
ifeq ($(PROCESSOR_ARCHITECTURE),AMD64)
CUSTOM_DEFINES += -DAMD64
endif
ifeq ($(PROCESSOR_ARCHITECTURE),x86)
CUSTOM_DEFINES += -DIA32
endif
endif
else
UNAME_S := $(shell uname -s)
ifeq ($(UNAME_S),Linux)
DETECTED_OS = LINUX
CUSTOM_DEFINES += -DLINUX
endif
ifeq ($(UNAME_S),Darwin)
CUSTOM_DEFINES += -DOSX
endif
UNAME_P := $(shell uname -p)
ifeq ($(UNAME_P),x86_64)
CUSTOM_DEFINES += -DAMD64
endif
ifneq ($(filter %86,$(UNAME_P)),)
CUSTOM_DEFINES += -DIA32
endif
ifneq ($(filter arm%,$(UNAME_P)),)
CUSTOM_DEFINES += -DARM
endif
endif
UNIT_TEST = 1
# General folder paths
CONFIG_PATH = testcfg
# Core copy has to be copied as well.
CORE_PATH = core
UNIT_TEST_PATH = $(TEST_FILE_ROOT)/tests
# Output file basename
BASENAME = fsfw
BINARY_NAME := $(BASENAME)-$(BOARD)
# Output files will be put in this directory inside
OUTPUT_FOLDER = $(OS)
# Optimization level. Optimized for debugging.
OPTIMIZATION = -O0
# Default debug output. Optimized for debugging.
DEBUG_LEVEL = -g3
ifdef GCOV
CUSTOM_DEFINES += -DGCOV
endif
# Output directories
BUILDPATH = _bin
DEPENDPATH = _dep
OBJECTPATH = _obj
ifeq ($(MAKECMDGOALS),mission)
BUILD_FOLDER = mission
else
BUILD_FOLDER = devel
endif
DEPENDDIR = $(DEPENDPATH)/$(OUTPUT_FOLDER)/$(BUILD_FOLDER)
OBJDIR = $(OBJECTPATH)/$(OUTPUT_FOLDER)/$(BUILD_FOLDER)
BINDIR = $(BUILDPATH)
CLEANDEP = $(DEPENDPATH)/$(OUTPUT_FOLDER)
CLEANOBJ = $(OBJECTPATH)/$(OUTPUT_FOLDER)
CLEANBIN = $(BUILDPATH)
#-------------------------------------------------------------------------------
# Tools and Includes
#-------------------------------------------------------------------------------
# Tool suffix when cross-compiling
CROSS_COMPILE =
# C Compiler
CC = $(CROSS_COMPILE)gcc
# C++ compiler
CXX = $(CROSS_COMPILE)g++
# Additional Tools
SIZE = $(CROSS_COMPILE)size
STRIP = $(CROSS_COMPILE)strip
CP = $(CROSS_COMPILE)objcopy
HEXCOPY = $(CP) -O ihex
BINCOPY = $(CP) -O binary
# files to be compiled, will be filled in by include makefiles
# := assignment is neccessary so we get all paths right
# https://www.gnu.org/software/make/manual/html_node/Flavors.html
CSRC :=
CXXSRC :=
ASRC :=
INCLUDES :=
# Directories where $(directoryname).mk files should be included from
SUBDIRS := $(FRAMEWORK_PATH) $(TEST_PATH) $(UNIT_TEST_PATH) $(CONFIG_PATH) \
$(CORE_PATH)
I_INCLUDES += $(addprefix -I, $(INCLUDES))
# This is a hack from http://make.mad-scientist.net/the-eval-function/
#
# The problem is, that included makefiles should be aware of their relative path
# but not need to guess or hardcode it. So we set $(CURRENTPATH) for them. If
# we do this globally and the included makefiles want to include other makefiles as
# well, they would overwrite $(CURRENTPATH), screwing the include after them.
#
# By using a for-loop with an eval'd macro, we can generate the code to include all
# sub-makefiles (with the correct $(CURRENTPATH) set) before actually evaluating
# (and by this possibly changing $(CURRENTPATH)) them.
#
# This works recursively, if an included makefile wants to include, it can safely set
# $(SUBDIRS) (which has already been evaluated here) and do
# "$(foreach S,$(SUBDIRS),$(eval $(INCLUDE_FILE)))"
# $(SUBDIRS) must be relative to the project root, so to include subdir foo, set
# $(SUBDIRS) = $(CURRENTPATH)/foo.
define INCLUDE_FILE
CURRENTPATH := $S
include $(S)/$(notdir $S).mk
endef
$(foreach S,$(SUBDIRS),$(eval $(INCLUDE_FILE)))
INCLUDES += $(TEST_FILE_ROOT)
INCLUDES += $(TEST_FILE_ROOT)/catch2/
#-------------------------------------------------------------------------------
# Source Files
#-------------------------------------------------------------------------------
# All source files which are not includes by the .mk files are added here
# Please ensure that no files are included by both .mk file and here !
# if a target is not listed in the current directory,
# make searches in the directories specified with VPATH
# All C Sources included by .mk files are assigned here
# Add the objects to sources so dependency handling works
C_OBJECTS += $(CSRC:.c=.o)
# Objects built from Assembly source files
ASM_OBJECTS = $(ASRC:.S=.o)
# Objects built from C++ source files
CXX_OBJECTS += $(CXXSRC:.cpp=.o)
#-------------------------------------------------------------------------------
# Build Configuration + Output
#-------------------------------------------------------------------------------
TARGET = Debug build.
DEBUG_MESSAGE = Off
OPTIMIZATION_MESSAGE = Off
# Define Messages
MSG_INFO = Software: Hosted unittest \(Catch2\) for the FSFW.
MSG_OPTIMIZATION = Optimization: $(OPTIMIZATION), $(OPTIMIZATION_MESSAGE)
MSG_TARGET = Target Build: $(TARGET)
MSG_DEBUG = Debug level: $(DEBUG_LEVEL), FSFW Debugging: $(DEBUG_MESSAGE)
MSG_LINKING = Linking:
MSG_COMPILING = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_DEPENDENCY = Collecting dependencies for:
MSG_BINARY = Generate binary:
# See https://stackoverflow.com/questions/6687630/how-to-remove-unused-c-c-symbols-with-gcc-and-ld
# Used to throw away unused code. Reduces code size significantly !
# -Wl,--gc-sections: needs to be passed to the linker to throw aways unused code
ifdef KEEP_UNUSED_CODE
PROTOTYPE_OPTIMIZATION =
UNUSED_CODE_REMOVAL =
else
PROTOTYPE_OPTIMIZATION = -ffunction-sections -fdata-sections
UNUSED_CODE_REMOVAL = -Wl,--gc-sections
# Link time optimization
# See https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html for reference
# Link time is larger and size of object files can not be retrieved
# but resulting binary is smaller. Could be used in mission/deployment build
# Requires -ffunction-section in linker call
LINK_TIME_OPTIMIZATION = -flto
OPTIMIZATION += $(PROTOTYPE_OPTIMIZATION)
endif
# Dependency Flags
# These flags tell the compiler to build dependencies
# See: https://www.gnu.org/software/make/manual/html_node/Automatic-Prerequisites.html
# Using following guide: http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/#combine
DEPFLAGS = -MT $@ -MMD -MP -MF $(DEPENDDIR)/$*.d
# Flags for the compiler call
# - std: Which C++ version to use. Common versions: c++11, c++14 and c++17
# - Wall: enable all warnings
# - Wextra: enable extra warnings
# - g: defines debug level
# - fmessage-length: to control the formatting algorithm for diagnostic messages;
# =0 means no line-wrapping is done; each error message appears on a single line
# - fno-exceptions: stops generating extra code needed to propagate exceptions,
# which can produce significant data size overhead
CUSTOM_DEFINES += -DUNIT_TEST
WARNING_FLAGS = -Wall -Wshadow=local -Wextra -Wimplicit-fallthrough=1 \
-Wno-unused-parameter
CXXDEFINES := $(CUSTOM_DEFINES)
CFLAGS +=
CXXFLAGS += -I. $(DEBUG_LEVEL) $(WARNING_FLAGS) $(DEPFLAGS) -fmessage-length=0 $(OPTIMIZATION)\
$(I_INCLUDES) $(CXXDEFINES)
CPPFLAGS += -std=c++11
# Flags for the linker call
# LINK_INCLUDES specify the path to used libraries and the linker script
# LINK_LIBRARIES: Link real time support
LDFLAGS := $(DEBUG_LEVEL) $(UNUSED_CODE_REMOVAL) $(OPTIMIZATION) -pthread
LINK_INCLUDES :=
LINK_LIBRARIES :=
ifdef LINUX
LINK_LIBRARIES += -lrt
endif
ifeq ($(OS),Windows_NT)
LINK_LIBRARIES += -lwsock32 -lws2_32
LDFLASGS += -fuse-ld=lld
endif
# Gnu Coverage Tools Flags
ifdef GCOV
GCOV_CXXFLAGS = -fprofile-arcs -ftest-coverage --coverage -fno-inline \
-fno-inline-small-functions -fno-default-inline
CXXFLAGS += $(GCOV_CXXFLAGS)
GCOV_LINKER_LIBS = -lgcov -fprofile-arcs -ftest-coverage
LINK_LIBRARIES += $(GCOV_LINKER_LIBS)
endif
# $(info $${CXXFLAGS} is [${CXXFLAGS}])
#-------------------------------------------------------------------------------
# Rules
#-------------------------------------------------------------------------------
# the call function assigns parameters to temporary variables
# https://www.gnu.org/software/make/manual/make.html#Call-Function
# $(1) = Memory names
# Rules are called for each memory type
# Two Expansion Symbols $$ are to escape the dollar sign for eval.
# See: http://make.mad-scientist.net/the-eval-function/
default: all
# Cleans all files
hardclean:
-rm -rf $(BUILDPATH)
-rm -rf $(OBJECTPATH)
-rm -rf $(DEPENDPATH)
# Only clean files for current build
clean:
-rm -rf $(CLEANOBJ)
-rm -rf $(CLEANBIN)
-rm -rf $(CLEANDEP)
# Only clean binaries. Useful for changing the binary type when object files
# are already compiled so complete rebuild is not necessary
cleanbin:
-rm -rf $(CLEANBIN)
# In this section, the binaries are built for all selected memories
# notestfw: all
all: executable
# Build target configuration
release: OPTIMIZATION = -Os $(PROTOTYPE_OPTIMIZATION) $(LINK_TIME_OPTIMIZATION)
release: LINK_TIME_OPTIMIZATION = -flto
release: TARGET = Mission build.
release: OPTIMIZATION_MESSAGE = On with Link Time Optimization
debug: CXXDEFINES += -DDEBUG
debug: TARGET = Debug
debug: DEBUG_MESSAGE = On
ifndef KEEP_UNUSED_CODE
debug release: OPTIMIZATION_MESSAGE += , no unused code removal
endif
debug release notestfw: executable
executable: $(BINDIR)/$(BINARY_NAME).elf
@echo
@echo $(MSG_INFO)
@echo $(MSG_TARGET)
@echo $(MSG_OPTIMIZATION)
@echo $(MSG_DEBUG)
C_OBJECTS_PREFIXED = $(addprefix $(OBJDIR)/, $(C_OBJECTS))
CXX_OBJECTS_PREFIXED = $(addprefix $(OBJDIR)/, $(CXX_OBJECTS))
ASM_OBJECTS_PREFIXED = $(addprefix $(OBJDIR)/, $(ASM_OBJECTS))
ALL_OBJECTS = $(ASM_OBJECTS_PREFIXED) $(C_OBJECTS_PREFIXED) \
$(CXX_OBJECTS_PREFIXED)
# Useful for debugging the Makefile
# Also see: https://www.oreilly.com/openbook/make3/book/ch12.pdf
# $(info $${ALL_OBJECTS} is [${ALL_OBJECTS}])
# $(info $${CXXSRC} is [${CXXSRC}])
# Automatic variables are used here extensively. Some of them
# are escaped($$) to suppress immediate evaluation. The most important ones are:
# $@: Name of Target (left side of rule)
# $<: Name of the first prerequisite (right side of rule)
# @^: List of all prerequisite, omitting duplicates
# @D: Directory and file-within-directory part of $@
# Generates binary and displays all build properties
# -p with mkdir ignores error and creates directory when needed.
# SHOW_DETAILS = 1
# Link with required libraries: HAL (Hardware Abstraction Layer) and
# HCC (File System Library)
$(BINDIR)/$(BINARY_NAME).elf: $(ALL_OBJECTS)
@echo
@echo $(MSG_LINKING) Target $@
@mkdir -p $(@D)
ifdef SHOW_DETAILS
$(CXX) $(LDFLAGS) $(LINK_INCLUDES) -o $@ $^ $(LINK_LIBRARIES)
else
@$(CXX) $(LDFLAGS) $(LINK_INCLUDES) -o $@ $^ $(LINK_LIBRARIES)
endif
ifeq ($(BUILD_FOLDER), mission)
# With Link Time Optimization, section size is not available
$(SIZE) $@
else
$(SIZE) $^ $@
endif
$(BINDIR)/$(BINARY_NAME).hex: $(BINDIR)/$(BINARY_NAME).elf
@echo
@echo $(MSG_BINARY)
@mkdir -p $(@D)
$(HEXCOPY) $< $@
# Build new objects for changed dependencies.
$(OBJDIR)/%.o: %.cpp
$(OBJDIR)/%.o: %.cpp $(DEPENDDIR)/%.d | $(DEPENDDIR)
@echo
@echo $(MSG_COMPILING) $<
@mkdir -p $(@D)
ifdef SHOW_DETAILS
$(CXX) $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $<
else
@$(CXX) $(CXXFLAGS) $(CPPFLAGS) -c -o $@ $<
endif
$(OBJDIR)/%.o: %.c
$(OBJDIR)/%.o: %.c $(DEPENDDIR)/%.d | $(DEPENDDIR)
@echo
@echo $(MSG_COMPILING) $<
@mkdir -p $(@D)
ifdef SHOW_DETAILS
$(CC) $(CXXFLAGS) $(CFLAGS) -c -o $@ $<
else
@$(CC) $(CXXFLAGS) $(CFLAGS) -c -o $@ $<
endif
#-------------------------------------------------------------------------------
# Dependency Handling
#-------------------------------------------------------------------------------
# Dependency Handling according to following guide:
# http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/
$(DEPENDDIR):
@mkdir -p $(@D)
DEPENDENCY_RELATIVE = $(CSRC:.c=.d) $(CXXSRC:.cpp=.d)
# This is the list of all dependencies
DEPFILES = $(addprefix $(DEPENDDIR)/, $(DEPENDENCY_RELATIVE))
# Create subdirectories for dependencies
$(DEPFILES):
@mkdir -p $(@D)
# Include all dependencies
include $(wildcard $(DEPFILES))
# .PHONY tells make that these targets aren't files
.PHONY: clean release debug all hardclean cleanbin