.idea/runConfigurations | ||
bsp_stm32h7_freertos | ||
cmake | ||
example_common@ff569dd02c | ||
fsfw@44402883b5 | ||
generators | ||
misc | ||
scripts | ||
STM32CubeH7@b340b13929 | ||
tmtc | ||
.gitignore | ||
.gitmodules | ||
CMakeLists.txt | ||
LICENSE | ||
load-path.sh | ||
NOTICE | ||
README.md |
FSFW Example Application
This repository features a demo application. The example has been run successfully on the following platforms:
- Linux host machine with the Linux OSAL or the Host OSAL
- Windows with the Host OSAL
- STM32H743ZI-Nucleo with the FreeRTOS OSAL
- Raspberry Pi with the Linux OSAL
- STM32H743ZI-Nucleo with the RTEMS OSAL
The purpose of this example is to provide a demo of the FSFW capabilities. However, it can also be used as a starting point to set up a repository for new flight software. It also aims to provide developers with practical examples of how the FSFW is inteded to be used and how project using the FSFW should or can be set up and it might serve as a basic test platform for the FSFW as well to ensure all OSALs are compiling and running as expected.
The repository contains a Python TMTC program which can be used to showcase the TMTC capabilities of the FSFW (currently, using the ECSS PUS packet standard).
Configuring the Example
The build system will copy three configuration files into the build directory:
commonConfig.h
which contains common configuration parametersOBSWConfig.h
which can contain machine and architecture specific configuration optionsFSFWConfig.h
which contains the configuration for the flight software framework
These files can be edited manually after CMake
build generation.
Index
Getting started with Eclipse for C/C++
Getting started with CMake
Getting started with the Hosted OSAL
Getting started with the FreeRTOS OSAL on a STM32
Getting started with the RTEMS OSAL on a STM32
Getting started with the Raspberry Pi
Getting started with the Beagle Bone Black
FSFW demo with FreeRTOS OSAL on the STM32H743ZI
This demo can be run on a STM32H743ZI-Nucleo board with the FreeRTOS OSAL.
General Information
The board is flashed and debugged with OpenOCD and this README specifies on
how to make this work with the Eclipse IDE. Other IDEs or the command line can be used as well as
long as long as OpenOCD integration is given. The example demo uses newlib nano (glibc).
Some system calls were overriden so the C and C++ stdio
functions work. IO is sent via the HUART3,
so debug output can be read directly from the USB connection to the board.
Prerequisites
If you have not set up the prerequisites yet, go to the prerequisites chapter for detailed instructions on how to install these.
Here is a brief overview of the required tools to develop software for the STM32H7 microcontroller:
- CMake build system generator installed
- Build system like Ninja Build or Make installed.
- Bare-Metal ARM toolchain installed
- Recommended for application code development: Eclipse for C/C++ installed with the Eclipse MCU plugin
- OpenOCD installed for Eclipse debugging
- STM32 USB drivers installed, separate steps for Windows or Linux
Building the software with CMake
On Windows, the following steps should be performed inside the MinGW64 console
after installing MSYS2 or inside another Unix shell like git bash
.
-
Clone this repository
git clone https://egit.irs.uni-stuttgart.de/fsfw/fsfw-example-stm32h7-freertos
-
Set up submodules
git submodule init git submodule update
-
Navigate into the cloned repository and create a folder for the build. We will create a Debug build folder.
mkdir cmake-build-debug cd cmake-build-debug
-
Ensure that the ARM compiler has been added to the path and can be called from the command line. For example, the following command should work:
arm-none-eabi-gcc --version
Now we will create the build configuration for cross-compilation of an ARM target. On Linux, the following build will create a debug build configuration with the Unix Makefile generator. You can also specify
-G Ninja
to use Ninja instead of Make.cmake ..
On Windows, use the following command to build with the
MinGW Makefiles
build systemcmake -G "MinGW Makefiles" ..
The build configuration can also be performed with the shell scripts located inside
cmake/scripts
. -
Build the application with the following command
cmake --build . -j
The application will be located inside the Debug folder and has been compiled for the flash memory.
-
You can test the application by first connecting the STM32H743ZI-Nucleo via USB. The device should now show up in the list of connected devices (make sure the USB drivers are installed as well). Drag and drop the binary file into the connected device to flash it. The debug output is also sent via the connected USB port and a blink pattern (1 second interval) can be used to verify the software is running properly.
Setting up Prerequisites
CMake
Linux
sudo apt-get install cmake
Windows
On Windows, you can use pacman -S mingw-w64-x86_64-cmake
, but you can also install the Windows
CMake via the installer. It is recommended to pick the install
option Add CMake to system PATH for all users
to CMake can be used from the command line.
Please note that you need to add the Windows CMake path to the MinGW64 path manually
if you want to use it in CMake.
Cross-Compiler
The instuctions here specify how to install and use a specific version of the
xPacks cross-compiler but you can use any other
ARM cross-compiler which can generate bare-metal code, usually denoted by the arm-none-eabi
cross-compiler triplet.
If you don't want to install nodejs you may go with the four-command manual installation.
Windows
On Windows, it is recommended to perform the xpm
and toolchain installation from the Windows
command line.The simple way required npm, which can be installed by installing
NodeJS. Make sure npm
can be run from the command line by adding
the folder containing npm.exe
to the system path and running the following command
npm install --global xpm@latest
xpm install --global @xpack-dev-tools/arm-none-eabi-gcc@11.2.1-1.1.1 --verbose
On Windows, the toolchain binaries will be located in a folder like this
C:\Users\<User>\AppData\Roaming\xPacks\@xpack-dev-tools\arm-none-eabi-gcc\<version>\.content\bin
You can now run the following commands in the repository root:
xpm init
xpm install @xpack-dev-tools/arm-none-eabi-gcc@11.2.1-1.1.1
to create symlinks to the toolchain in ./xpacks/.bin
.
You can now set up the environment by using . load_path.sh
or the following command
export PATH="$(pwd)/xpacks/.bin":$PATH
On Windows, you can use git bash to perform the step above.
Alternatively, you can use the graphical system environmental variables editor to add the
.bin
path to the system variables permanently or use the appriate command for CMD
or
PowerShell to update the PATH
variable.
Linux
Install npm
and nodejs
first. Example for Ubuntu according to
this guide.
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -
sudo apt-get update && sudo apt-get install nodejs
Check that npm
is installed with npm --version
.
Then xpm
and the cross-compiler are installed.
sudo npm install --global xpm@latest
xpm install --global @xpack-dev-tools/arm-none-eabi-gcc@11.2.1-1.1.1 --verbose
You can now run the following commands in the repository root:
xpm init
xpm install @xpack-dev-tools/arm-none-eabi-gcc@11.2.1-1.1.1
to create symlinks to the toolchain in ./xpacks/.bin
.
You can now set up the environment by using . load_path.sh
or the following command
export PATH="$(pwd)/xpacks/.bin":$PATH
Build System
It is recommended to use ninja
or make
as the software build system.
Windows
It is recommended to use the Ninja build system. Download the ninja
executable and place it somewhere.
You need to add the folder containing the ninja executable to the system environmental variables
so it can be used in the build process. You can test whether ninja
works by running
ninja --version
in the command line.
Alternatively or additionally, you can also install mingw32-make
which comes bundled with MinGW64. Make sure to add the binaries path to
the Windows path during installation. Otherwise, you need to add msys64/mingw64/bin
to the
Windows path so you can run installed binaries from the command line.
Open the MinGW64
shell and run the following commands.
pacman -S mingw-w64-x86_64-toolchain mingw-w64-x86_64-make mingw-w64-x86_64-cmake
You can test successfull installation with mingw32-make -v
from the Windows Command Line.
Linux
On Linux, make
is pre-installed and it is recommended to use it directly.
You can install ninja
with
sudo apt-get install ninja-build
USB Drivers
Windows
Install the STM32 USB drivers.
Linux
Install the USB drivers on Linux. On Ubuntu, you can run the following command to install it:
sudo apt-get install stlink-tools
Setting up Eclipse for OpenOCD debugging
The separate Eclipse README specifies how to set up Eclipse. The STM32 configuration uses the xPacks OpenOCD and the xPacks ARM Toolchain, so those should be installed as well. OpenOCD should be configured correctly in the STM32 launch configurations.
Troubleshooting
OpenOCD errors
If you get the following error in OpenOCD: "Error: auto_probe failed", this could be related from switching between FreeRTOS and RTEMS. You can try the following steps:
-
First way: Flash the binary manually by drag & droping the binary into the USB drive manually once
-
Second way: Add -c "gdb_memory_map disable" to the OpenOCD arguments (in Eclipse) and run once. Debugging might not be possible, so remove it for subsequent runs.
-
Third way: Add the following lines to the
stm32h7x.cfg
file located inside the OpenOCD folder inside thescripts/target
folder:$_CHIPNAME.cpu configure -event gdb-attach { halt } $_CHIPNAME.cpu configure -event gdb-attach { reset init }