Init commit

bsp_stm32_freertos/STM32CubeH7/Boards/CMakeLists.txt

@@ -0,0 +1 @@
+add_subdirectory(NUCLEO-H743ZI)

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/CMakeLists.txt

@@ -0,0 +1,5 @@
+add_subdirectory(Src)
+
+target_include_directories(${TARGET_NAME} PRIVATE
+	Inc
+)

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/FreeRTOSConfig.h

@@ -0,0 +1,136 @@
+/*
+ * FreeRTOS Kernel V10.0.1
+ * Copyright (C) 2017 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of
+ * this software and associated documentation files (the "Software"), to deal in
+ * the Software without restriction, including without limitation the rights to
+ * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ * the Software, and to permit persons to whom the Software is furnished to do so,
+ * subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
+ * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+ * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * http://www.FreeRTOS.org
+ * http://aws.amazon.com/freertos
+ *
+ * 1 tab == 4 spaces!
+ */
+
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *
+ * See http://www.freertos.org/a00110.html.
+ *----------------------------------------------------------*/
+
+/* Ensure stdint is only used by the compiler, and not the assembler. */
+#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
+ #include <stdint.h>
+ extern uint32_t SystemCoreClock;
+#endif
+
+#define configUSE_PREEMPTION                    1
+/* If this is set to one, configMAX_PRIORITIES is limited to 32 */
+#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#define configUSE_IDLE_HOOK                     0
+#define configUSE_TICK_HOOK                     0
+#define configCPU_CLOCK_HZ                      ( SystemCoreClock )
+#define configTICK_RATE_HZ                      ( ( TickType_t ) 1000 )
+#define configMAX_PRIORITIES                    ( 10 )
+#define configMINIMAL_STACK_SIZE                ( ( uint16_t ) 256 )
+#define configTOTAL_HEAP_SIZE                   ( ( size_t ) ( 1024 * 100 ) )
+#define configMAX_TASK_NAME_LEN                 ( 16 )
+#define configUSE_TRACE_FACILITY                1
+#define configUSE_16_BIT_TICKS                  0
+#define configIDLE_SHOULD_YIELD                 1
+#define configUSE_MUTEXES                       1
+#define configQUEUE_REGISTRY_SIZE               8
+#define configCHECK_FOR_STACK_OVERFLOW          0
+#define configUSE_RECURSIVE_MUTEXES             1
+#define configUSE_MALLOC_FAILED_HOOK            0
+#define configUSE_APPLICATION_TASK_TAG          0
+#define configUSE_COUNTING_SEMAPHORES           1
+#define configGENERATE_RUN_TIME_STATS           0
+
+
+/* Co-routine definitions. */
+#define configUSE_CO_ROUTINES                   0
+#define configMAX_CO_ROUTINE_PRIORITIES         ( 2 )
+
+/* Software timer definitions. */
+#define configUSE_TIMERS                        0
+#define configTIMER_TASK_PRIORITY               ( 2 )
+#define configTIMER_QUEUE_LENGTH                10
+#define configTIMER_TASK_STACK_DEPTH            ( configMINIMAL_STACK_SIZE * 2 )
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+#define INCLUDE_vTaskPrioritySet                1
+#define INCLUDE_uxTaskPriorityGet               1
+#define INCLUDE_vTaskDelete                     1
+#define INCLUDE_vTaskCleanUpResources           1
+#define INCLUDE_vTaskSuspend                    1
+#define INCLUDE_vTaskDelayUntil                 1
+#define INCLUDE_vTaskDelay                      1
+#define INCLUDE_xQueueGetMutexHolder            1
+#define INCLUDE_xTaskGetSchedulerState          1
+#define INCLUDE_eTaskGetState                   1
+#define INCLUDE_uxTaskGetStackHighWaterMark		1
+
+/* Cortex-M specific definitions. */
+#ifdef __NVIC_PRIO_BITS
+ /* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
+ #define configPRIO_BITS                        __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS                        4        /* 15 priority levels */
+#endif
+
+/* The lowest interrupt priority that can be used in a call to a "set priority"
+function. */
+#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY     0xf
+
+/* The highest interrupt priority that can be used by any interrupt service
+routine that makes calls to interrupt safe FreeRTOS API functions.  DO NOT CALL
+INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
+PRIORITY THAN THIS! (higher priorities are lower numeric values. */
+#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY  5
+
+/* Interrupt priorities used by the kernel port layer itself.  These are generic
+to all Cortex-M ports, and do not rely on any particular library functions. */
+#define configKERNEL_INTERRUPT_PRIORITY     ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
+See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY  ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
+
+/* Normal assert() semantics without relying on the provision of an assert.h
+header file. */
+#define configASSERT( x ) if( ( x ) == 0 ) { taskDISABLE_INTERRUPTS(); for( ;; ); }
+
+/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
+   standard names. */
+#define vPortSVCHandler    SVC_Handler
+#define xPortPendSVHandler PendSV_Handler
+
+/* IMPORTANT: This define MUST be commented when used with STM32Cube firmware,
+              to prevent overwriting SysTick_Handler defined within STM32Cube HAL */
+/* #define xPortSysTickHandler SysTick_Handler */
+
+#endif /* FREERTOS_CONFIG_H */

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/app_dhcp.h

@@ -0,0 +1,26 @@
+#ifndef BSP_STM32_STM32CUBEH7_BOARDS_NUCLEO_H743ZI_INC_APP_DHCP_H_
+#define BSP_STM32_STM32CUBEH7_BOARDS_NUCLEO_H743ZI_INC_APP_DHCP_H_
+
+#include <lwipopts.h>
+
+#if LWIP_DHCP == 1
+
+#include <lwip/netif.h>
+
+/* DHCP process states */
+#define DHCP_OFF                   (uint8_t) 0
+#define DHCP_START                 (uint8_t) 1
+#define DHCP_WAIT_ADDRESS          (uint8_t) 2
+#define DHCP_ADDRESS_ASSIGNED      (uint8_t) 3
+#define DHCP_TIMEOUT               (uint8_t) 4
+#define DHCP_LINK_DOWN             (uint8_t) 5
+
+uint8_t get_dhcp_state();
+void set_dhcp_state(uint8_t new_state);
+
+void DHCP_Process(struct netif *netif);
+void DHCP_Periodic_Handle(struct netif *netif);
+
+#endif /* LWIP_DHCP */
+
+#endif /* BSP_STM32_STM32CUBEH7_BOARDS_NUCLEO_H743ZI_INC_APP_DHCP_H_ */

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/app_ethernet.h

@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    LwIP/LwIP_UDP_Echo_Client/Inc/app_ethernet.h 
+  * @author  MCD Application Team
+  * @brief   Header for app_ethernet.c module
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * All rights reserved.</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted, provided that the following conditions are met:
+  *
+  * 1. Redistribution of source code must retain the above copyright notice,
+  *    this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright notice,
+  *    this list of conditions and the following disclaimer in the documentation
+  *    and/or other materials provided with the distribution.
+  * 3. Neither the name of STMicroelectronics nor the names of other
+  *    contributors to this software may be used to endorse or promote products
+  *    derived from this software without specific written permission.
+  * 4. This software, including modifications and/or derivative works of this
+  *    software, must execute solely and exclusively on microcontroller or
+  *    microprocessor devices manufactured by or for STMicroelectronics.
+  * 5. Redistribution and use of this software other than as permitted under
+  *    this license is void and will automatically terminate your rights under
+  *    this license.
+  *
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __APP_ETHERNET_H
+#define __APP_ETHERNET_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include <lwip/netif.h>
+#include <stdbool.h>
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+
+   
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+void ethernet_link_status_updated(struct netif *netif);
+void ethernet_link_periodic_handle(struct netif *netif);
+
+void set_lwip_addresses(ip_addr_t* ipaddr, ip_addr_t* netmask, ip_addr_t* gw);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __APP_ETHERNET_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/boardconfig.h

@@ -0,0 +1,10 @@
+#ifndef BSP_STM32_BOARDS_NUCLEO_H743ZI_INC_BOARDCONFIG_H_
+#define BSP_STM32_BOARDS_NUCLEO_H743ZI_INC_BOARDCONFIG_H_
+
+//! Timeout when sending debug data via the UART interface in MS
+#define DEBUG_UART_MS_TIMEOUT 	10
+#define DEBUG_UART_BAUDRATE		115200
+
+
+
+#endif /* BSP_STM32_BOARDS_NUCLEO_H743ZI_INC_BOARDCONFIG_H_ */

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/hardware_init.h

@@ -0,0 +1,36 @@
+/**
+ * Additional layer for hardware initialization.
+ */
+
+#ifndef STM32_BSP_HARDWARE_INIT_H_
+#define STM32_BSP_HARDWARE_INIT_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <stm32h7xx_hal.h>
+#include <stm32h7xx_hal_gpio.h>
+#include <stm32h7xx_hal_uart.h>
+
+/**
+ * Declaration of global hardware handlers here.
+ * Definition inside respective .cpp or .c files.
+ */
+extern UART_HandleTypeDef huart3;
+extern GPIO_InitTypeDef gpio_uart_init_struct;
+extern struct netif gnetif; /* network interface structure */
+
+extern bool debugAvailable;
+
+void performHardwareInit();
+void Netif_Config(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32_BSP_HARDWARE_INIT_H_ */

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/lwipopts.h

@@ -0,0 +1,252 @@
+/**
+  ******************************************************************************
+  * @file    LwIP/LwIP_HTTP_Server_Netconn_RTOS/Inc/lwipopts.h
+  * @author  MCD Application Team
+  * @brief   lwIP Options Configuration.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * All rights reserved.</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted, provided that the following conditions are met:
+  *
+  * 1. Redistribution of source code must retain the above copyright notice,
+  *    this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright notice,
+  *    this list of conditions and the following disclaimer in the documentation
+  *    and/or other materials provided with the distribution.
+  * 3. Neither the name of STMicroelectronics nor the names of other
+  *    contributors to this software may be used to endorse or promote products
+  *    derived from this software without specific written permission.
+  * 4. This software, including modifications and/or derivative works of this
+  *    software, must execute solely and exclusively on microcontroller or
+  *    microprocessor devices manufactured by or for STMicroelectronics.
+  * 5. Redistribution and use of this software other than as permitted under
+  *    this license is void and will automatically terminate your rights under
+  *    this license.
+  *
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+#ifndef __LWIPOPTS_H__
+#define __LWIPOPTS_H__
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#define SYS_LIGHTWEIGHT_PROT    0
+
+/**
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#define NO_SYS                  1
+
+/* ---------- Memory options ---------- */
+/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
+   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
+   byte alignment -> define MEM_ALIGNMENT to 2. */
+#define MEM_ALIGNMENT           4
+
+/* MEM_SIZE: the size of the heap memory. If the application will send
+a lot of data that needs to be copied, this should be set high. */
+#define MEM_SIZE                (10*1024)
+
+/* Relocate the LwIP RAM heap pointer */
+#define LWIP_RAM_HEAP_POINTER    (0x30044000)
+
+/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application
+   sends a lot of data out of ROM (or other static memory), this
+   should be set high. */
+#define MEMP_NUM_PBUF           10
+/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+   per active UDP "connection". */
+#define MEMP_NUM_UDP_PCB        6
+/* MEMP_NUM_TCP_PCB: the number of simulatenously active TCP
+   connections. */
+#define MEMP_NUM_TCP_PCB        10
+/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP
+   connections. */
+#define MEMP_NUM_TCP_PCB_LISTEN 5
+/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP
+   segments. */
+#define MEMP_NUM_TCP_SEG        8
+/* MEMP_NUM_SYS_TIMEOUT: the number of simulateously active
+   timeouts. */
+#define MEMP_NUM_SYS_TIMEOUT    10
+
+
+/* ---------- Pbuf options ---------- */
+/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
+   @ note: used to allocate Tx pbufs only */
+#define PBUF_POOL_SIZE          4
+
+/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */
+#define PBUF_POOL_BUFSIZE       1528
+
+/* LWIP_SUPPORT_CUSTOM_PBUF == 1: to pass directly MAC Rx buffers to the stack 
+   no copy is needed */
+#define LWIP_SUPPORT_CUSTOM_PBUF      1
+
+/* ---------- IPv4 options ---------- */
+#define LWIP_IPV4                1
+
+/* ---------- TCP options ---------- */
+#define LWIP_TCP                1
+#define TCP_TTL                 255
+
+/* Controls if TCP should queue segments that arrive out of
+   order. Define to 0 if your device is low on memory. */
+#define TCP_QUEUE_OOSEQ         0
+
+/* TCP Maximum segment size. */
+#define TCP_MSS                 (1500 - 40)	  /* TCP_MSS = (Ethernet MTU - IP header size - TCP header size) */
+
+/* TCP sender buffer space (bytes). */
+#define TCP_SND_BUF             (4*TCP_MSS)
+
+/*  TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+  as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */
+
+#define TCP_SND_QUEUELEN        (2* TCP_SND_BUF/TCP_MSS)
+
+/* TCP receive window. */
+#define TCP_WND                 (2*TCP_MSS)
+
+
+/* ---------- ICMP options ---------- */
+#define LWIP_ICMP                       1
+
+
+/* ---------- DHCP options ---------- */
+#define LWIP_DHCP                       1
+
+
+/* ---------- UDP options ---------- */
+#define LWIP_UDP                1
+#define UDP_TTL                 255
+
+/* ---------- link callback options ---------- */
+/* LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#define LWIP_NETIF_LINK_CALLBACK        1
+
+/*
+   --------------------------------------
+   ---------- Checksum options ----------
+   --------------------------------------
+*/
+
+/* 
+The STM32H7xx allows computing and verifying the IP, UDP, TCP and ICMP checksums by hardware:
+ - To use this feature let the following define uncommented.
+ - To disable it and process by CPU comment the  the checksum.
+*/
+#define CHECKSUM_BY_HARDWARE 
+
+
+#ifdef CHECKSUM_BY_HARDWARE
+  /* CHECKSUM_GEN_IP==0: Generate checksums by hardware for outgoing IP packets.*/
+  #define CHECKSUM_GEN_IP                 0
+  /* CHECKSUM_GEN_UDP==0: Generate checksums by hardware for outgoing UDP packets.*/
+  #define CHECKSUM_GEN_UDP                0
+  /* CHECKSUM_GEN_TCP==0: Generate checksums by hardware for outgoing TCP packets.*/
+  #define CHECKSUM_GEN_TCP                0 
+  /* CHECKSUM_CHECK_IP==0: Check checksums by hardware for incoming IP packets.*/
+  #define CHECKSUM_CHECK_IP               0
+  /* CHECKSUM_CHECK_UDP==0: Check checksums by hardware for incoming UDP packets.*/
+  #define CHECKSUM_CHECK_UDP              0
+  /* CHECKSUM_CHECK_TCP==0: Check checksums by hardware for incoming TCP packets.*/
+  #define CHECKSUM_CHECK_TCP              0
+  /* CHECKSUM_CHECK_ICMP==0: Check checksums by hardware for incoming ICMP packets.*/
+  #define CHECKSUM_GEN_ICMP               0
+#else
+  /* CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.*/
+  #define CHECKSUM_GEN_IP                 1
+  /* CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.*/
+  #define CHECKSUM_GEN_UDP                1
+  /* CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.*/
+  #define CHECKSUM_GEN_TCP                1
+  /* CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.*/
+  #define CHECKSUM_CHECK_IP               1
+  /* CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.*/
+  #define CHECKSUM_CHECK_UDP              1
+  /* CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.*/
+  #define CHECKSUM_CHECK_TCP              1
+  /* CHECKSUM_CHECK_ICMP==1: Check checksums by hardware for incoming ICMP packets.*/
+  #define CHECKSUM_GEN_ICMP               1
+#endif
+
+
+/*
+   ----------------------------------------------
+   ---------- Sequential layer options ----------
+   ----------------------------------------------
+*/
+/**
+ * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
+ */
+#define LWIP_NETCONN                    0
+
+/*
+   ------------------------------------
+   ---------- Socket options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
+ */
+#define LWIP_SOCKET                     0
+
+/*
+   ------------------------------------
+   ---------- httpd options ----------
+   ------------------------------------
+*/
+/** Set this to 1 to include "fsdata_custom.c" instead of "fsdata.c" for the
+ * file system (to prevent changing the file included in CVS) */
+#define HTTPD_USE_CUSTOM_FSDATA   1
+
+
+/*
+   ---------------------------------
+   ---------- OS options ----------
+   ---------------------------------
+*/
+
+#define TCPIP_THREAD_NAME              "TCP/IP"
+#define TCPIP_THREAD_STACKSIZE          1000
+#define TCPIP_MBOX_SIZE                 6
+#define DEFAULT_UDP_RECVMBOX_SIZE       6
+#define DEFAULT_TCP_RECVMBOX_SIZE       6
+#define DEFAULT_ACCEPTMBOX_SIZE         6
+#define DEFAULT_THREAD_STACKSIZE        500
+#define TCPIP_THREAD_PRIO               osPriorityHigh
+
+/*
+   ---------------------------------
+   ---------- ASSERT options ----------
+   ---------------------------------
+*/
+#define LWIP_NOASSERT
+
+#endif /* __LWIPOPTS_H__ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/main.h

@@ -0,0 +1,96 @@
+/**
+ ******************************************************************************
+ * @file    LwIP/LwIP_HTTP_Server_Netconn_RTOS/Inc/main.h
+ * @author  MCD Application Team
+ * @brief   Header for main.c module
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+ * All rights reserved.</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted, provided that the following conditions are met:
+ *
+ * 1. Redistribution of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of other
+ *    contributors to this software may be used to endorse or promote products
+ *    derived from this software without specific written permission.
+ * 4. This software, including modifications and/or derivative works of this
+ *    software, must execute solely and exclusively on microcontroller or
+ *    microprocessor devices manufactured by or for STMicroelectronics.
+ * 5. Redistribution and use of this software other than as permitted under
+ *    this license is void and will automatically terminate your rights under
+ *    this license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+ * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* UDP local connection port */
+#define UDP_SERVER_PORT    7
+/* UDP remote connection port */
+#define UDP_CLIENT_PORT    2008
+
+/*Static DEST IP ADDRESS: DEST_IP_ADDR0.DEST_IP_ADDR1.DEST_IP_ADDR2.DEST_IP_ADDR3 */
+#define DEST_IP_ADDR0   ((uint8_t)169U)
+#define DEST_IP_ADDR1   ((uint8_t)254U)
+#define DEST_IP_ADDR2   ((uint8_t)39U)
+#define DEST_IP_ADDR3   ((uint8_t)2U)
+
+/*Static IP ADDRESS*/
+#define IP_ADDR0   169
+#define IP_ADDR1   254
+#define IP_ADDR2   1
+#define IP_ADDR3   38
+
+/*NETMASK*/
+#define NETMASK_ADDR0   255
+#define NETMASK_ADDR1   255
+#define NETMASK_ADDR2   0
+#define NETMASK_ADDR3   0
+
+/*Gateway Address*/
+#define GW_ADDR0   192
+#define GW_ADDR1   168
+#define GW_ADDR2   178
+#define GW_ADDR3   1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/stm32h7xx.h

@@ -0,0 +1,243 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32H7xx Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32H7xx device used in the target application
+  *              - To use or not the peripheral<61>s drivers in application code(i.e.
+  *                code will be based on direct access to peripheral<61>s registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32h7xx
+  * @{
+  */
+
+#ifndef STM32H7xx_H
+#define STM32H7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32H7)
+#define STM32H7
+#endif /* STM32H7 */
+
+
+/* Uncomment the line below according to the target STM32H7 device used in your
+   application
+  */
+
+#if !defined (STM32H743xx) && !defined (STM32H753xx)  && !defined (STM32H750xx) && !defined (STM32H742xx) && \
+    !defined (STM32H745xx) && !defined (STM32H755xx)  && !defined (STM32H747xx) && !defined (STM32H757xx) && \
+    !defined (STM32H7A3xx) && !defined (STM32H7A3xxQ) && !defined (STM32H7B3xx) && !defined (STM32H7B3xxQ) && !defined (STM32H7B0xx)  && !defined (STM32H7B0xxQ) && \
+    !defined (STM32H735xx) && !defined (STM32H733xx)  && !defined (STM32H730xx) && !defined (STM32H730xxQ)  && !defined (STM32H725xx) && !defined (STM32H723xx)
+  /* #define STM32H742xx */   /*!< STM32H742VI, STM32H742ZI, STM32H742AI, STM32H742II, STM32H742BI, STM32H742XI Devices */
+  /* #define STM32H743xx */   /*!< STM32H743VI, STM32H743ZI, STM32H743AI, STM32H743II, STM32H743BI, STM32H743XI Devices */
+  /* #define STM32H753xx */   /*!< STM32H753VI, STM32H753ZI, STM32H753AI, STM32H753II, STM32H753BI, STM32H753XI Devices */
+  /* #define STM32H750xx */   /*!< STM32H750V, STM32H750I, STM32H750X Devices */
+  /* #define STM32H747xx */   /*!< STM32H747ZI, STM32H747AI, STM32H747II, STM32H747BI, STM32H747XI Devices */
+  /* #define STM32H757xx */   /*!< STM32H757ZI, STM32H757AI, STM32H757II, STM32H757BI, STM32H757XI Devices */
+  /* #define STM32H745xx */   /*!< STM32H745ZI, STM32H745II, STM32H745BI, STM32H745XI Devices  */
+  /* #define STM32H755xx */   /*!< STM32H755ZI, STM32H755II, STM32H755BI, STM32H755XI Devices  */
+  /* #define STM32H7B0xx */   /*!< STM32H7B0ABIxQ, STM32H7B0IBTx, STM32H7B0RBTx, STM32H7B0VBTx, STM32H7B0ZBTx, STM32H7B0IBKxQ */
+  /* #define STM32H7A3xx */   /*!< STM32H7A3IIK6, STM32H7A3IIT6, STM32H7A3NIH6, STM32H7A3RIT6, STM32H7A3VIH6, STM32H7A3VIT6, STM32H7A3ZIT6 */
+  /* #define STM32H7A3xxQ */  /*!< STM32H7A3QIY6Q, STM32H7A3IIK6Q, STM32H7A3IIT6Q, STM32H7A3LIH6Q, STM32H7A3VIH6Q, STM32H7A3VIT6Q, STM32H7A3AII6Q, STM32H7A3ZIT6Q */
+  /* #define STM32H7B3xx */   /*!< STM32H7B3IIK6, STM32H7B3IIT6, STM32H7B3NIH6, STM32H7B3RIT6, STM32H7B3VIH6, STM32H7B3VIT6, STM32H7B3ZIT6 */
+  /* #define STM32H7B3xxQ */  /*!< STM32H7B3QIY6Q, STM32H7B3IIK6Q, STM32H7B3IIT6Q, STM32H7B3LIH6Q, STM32H7B3VIH6Q, STM32H7B3VIT6Q, STM32H7B3AII6Q, STM32H7B3ZIT6Q */
+  /* #define STM32H735xx */   /*!< STM32H735AGI6, STM32H735IGK6, STM32H735RGV6, STM32H735VGT6, STM32H735VGY6, STM32H735ZGT6 Devices */
+  /* #define STM32H733xx */   /*!< STM32H733VGH6, STM32H733VGT6, STM32H733ZGI6, STM32H733ZGT6, Devices */
+  /* #define STM32H730xx */   /*!< STM32H730VBH6, STM32H730VBT6, STM32H730ZBT6, STM32H730ZBI6 Devices */
+  /* #define STM32H730xxQ */  /*!< STM32H730IBT6Q, STM32H730ABI6Q, STM32H730IBK6Q Devices */
+  /* #define STM32H725xx */   /*!< STM32H725AGI6, STM32H725IGK6, STM32H725IGT6, STM32H725RGV6, STM32H725VGT6, STM32H725VGY6, STM32H725ZGT6, STM32H725REV6, SM32H725VET6, STM32H725ZET6, STM32H725AEI6, STM32H725IET6, STM32H725IEK6  Devices */
+  /* #define STM32H723xx */   /*!< STM32H723VGH6, STM32H723VGT6, STM32H723ZGI6, STM32H723ZGT6, STM32H723VET6, STM32H723VEH6, STM32H723ZET6, STM32H723ZEI6 Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+
+#if defined(DUAL_CORE) && !defined(CORE_CM4) && !defined(CORE_CM7)
+ #error "Dual core device, please select CORE_CM4 or CORE_CM7"
+#endif
+
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.9.0
+  */
+#define __STM32H7xx_CMSIS_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB1   (0x09) /*!< [23:16] sub1 version */
+#define __STM32H7xx_CMSIS_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32H7xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
+#define __STM32H7xx_CMSIS_DEVICE_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+                                      |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32H743xx)
+  #include "stm32h743xx.h"
+#elif defined(STM32H753xx)
+  #include "stm32h753xx.h"
+#elif defined(STM32H750xx)
+  #include "stm32h750xx.h"
+#elif defined(STM32H742xx)
+  #include "stm32h742xx.h"
+#elif defined(STM32H745xx)
+  #include "stm32h745xx.h"
+#elif defined(STM32H755xx)
+  #include "stm32h755xx.h"
+#elif defined(STM32H747xx)
+  #include "stm32h747xx.h"
+#elif defined(STM32H757xx)
+  #include "stm32h757xx.h"
+#elif defined(STM32H7B0xx)
+  #include "stm32h7b0xx.h"
+#elif defined(STM32H7B0xxQ)
+  #include "stm32h7b0xxq.h"
+#elif defined(STM32H7A3xx)
+  #include "stm32h7a3xx.h"
+#elif defined(STM32H7B3xx)
+  #include "stm32h7b3xx.h"
+#elif defined(STM32H7A3xxQ)
+  #include "stm32h7a3xxq.h"
+#elif defined(STM32H7B3xxQ)
+  #include "stm32h7b3xxq.h"
+#elif defined(STM32H735xx)
+  #include "stm32h735xx.h"
+#elif defined(STM32H733xx)
+  #include "stm32h733xx.h"
+#elif defined(STM32H730xx)
+  #include "stm32h730xx.h"
+#elif defined(STM32H730xxQ)
+  #include "stm32h730xxq.h"
+#elif defined(STM32H725xx)
+  #include "stm32h725xx.h"
+#elif defined(STM32H723xx)
+  #include "stm32h723xx.h"
+#else
+ #error "Please select first the target STM32H7xx device used in your application (in stm32h7xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL)))
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32h7xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* STM32H7xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/stm32h7xx_hal_conf.h

@@ -0,0 +1,425 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32h7xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_HAL_CONF_H
+#define __STM32H7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_HRTIM_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_JPEG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_MDIOS_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED   
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RAMECC_MODULE_ENABLED   
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SWPMI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+#define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+   
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+   
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+#if !defined  (LSI_VALUE) 
+  #define LSI_VALUE  ((uint32_t)32000)      /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                              The real value may vary depending on the variations
+                                              in voltage and temperature.*/
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+/* #define  USE_SD_TRANSCEIVER           1U   */            /*!< use uSD Transceiver */
+#define  USE_SPI_CRC                  1U               /*!< use CRC in SPI */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT         4  /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT         4  /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0    ((uint8_t)0x02)
+#define ETH_MAC_ADDR1    ((uint8_t)0x00)
+#define ETH_MAC_ADDR2    ((uint8_t)0x00)
+#define ETH_MAC_ADDR3    ((uint8_t)0x00)
+#define ETH_MAC_ADDR4    ((uint8_t)0x00)
+#define ETH_MAC_ADDR5    ((uint8_t)0x00)
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+   
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32h7xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+      
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+   
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+   
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+ #include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+   
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+   
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/stm32h7xx_it.h

@@ -0,0 +1,50 @@
+/**
+  ******************************************************************************
+  * @file    Templates/Inc/stm32h7xx_it.h 
+  * @author  MCD Application Team
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_IT_H
+#define __STM32H7xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_IT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/stm32h7xx_nucleo_conf.h

@@ -0,0 +1,82 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_nucleo_conf.h
+  * @author  MCD Application Team
+  * @brief   STM32H7xx_Nuleo board configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7XX_NUCLEO_CONF_H
+#define STM32H7XX_NUCLEO_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+#include "stm32h743xx.h"
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup STM32H7XX_NUCLEO
+  * @{
+  */
+
+/** @defgroup STM32H7XX_NUCLEO_CONFIG Config
+  * @{
+  */
+
+/** @defgroup STM32H7XX_NUCLEO_CONFIG_Exported_Constants Exported Constants
+  * @{
+  */
+/* Nucleo pin and part number defines */
+#define USE_NUCLEO_144
+#define USE_NUCLEO_H743ZI
+
+/* COM define */
+#define USE_COM_LOG                         0U
+#define USE_BSP_COM_FEATURE                 1U
+
+/* IRQ priorities */
+#define BSP_BUTTON_USER_IT_PRIORITY         15U
+
+#define BUS_SPI1_BAUDRATE                   18000000
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7XX_NUCLEO_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Inc/system_stm32h7xx.h

@@ -0,0 +1,105 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32h7xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-Mx Device System Source File for STM32H7xx devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32h7xx_system
+  * @{
+  */
+
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef SYSTEM_STM32H7XX_H
+#define SYSTEM_STM32H7XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32H7xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32H7xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;             /*!< System Domain1 Clock Frequency  */
+extern uint32_t SystemD2Clock;               /*!< System Domain2 Clock Frequency  */
+extern const  uint8_t D1CorePrescTable[16] ; /*!< D1CorePrescTable prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Exported_Functions
+  * @{
+  */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_STM32H7XX_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/NUCLEO-H743ZI.mk

@@ -0,0 +1,4 @@
+CSRC += $(wildcard $(CURRENTPATH)/Src/*.c)
+CSRC += $(wildcard $(CURRENTPATH)/Src/networking/*.c)
+
+INCLUDES += $(CURRENTPATH)/Inc

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/STM32H743ZITx_FLASH.ld

@@ -0,0 +1,191 @@
+/*
+*****************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Abstract    : Linker script for STM32H743XIHx Device with
+**                2048KByte FLASH, 128KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** Copyright (c) 2017 STMicroelectronics.
+** All rights reserved.
+**
+** This software component is licensed by ST under BSD 3-Clause license,
+** the "License"; You may not use this file except in compliance with the
+** License. You may obtain a copy of the License at:
+**                        opensource.org/licenses/BSD-3-Clause
+**
+****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x24080000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x400;      /* required amount of heap  */
+_Min_Stack_Size = 0x800; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+DTCMRAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 128K
+RAM_D1 (xrw)      : ORIGIN = 0x24000000, LENGTH = 512K
+RAM_D2 (xrw)      : ORIGIN = 0x30000000, LENGTH = 288K
+RAM_D3 (xrw)      : ORIGIN = 0x38000000, LENGTH = 64K
+ITCMRAM (xrw)      : ORIGIN = 0x00000000, LENGTH = 64K
+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 2048K
+
+
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM_D1 AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM_D1
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM_D1 
+  
+
+  
+  .lwip_sec (NOLOAD) : {
+    . = ABSOLUTE(0x30040000);
+    *(.RxDecripSection) 
+    
+    . = ABSOLUTE(0x30040060);
+    *(.TxDecripSection)
+    
+    . = ABSOLUTE(0x30040200);
+    *(.RxArraySection) 
+  } >RAM_D2 AT> FLASH
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/CMakeLists.txt

@@ -0,0 +1,9 @@
+target_sources(${TARGET_NAME} PRIVATE
+	freertos.c
+	hardware_init.c
+	stm32h7xx_hal_timebase_tim.c
+	stm32h7xx_it.c
+	syscalls.c
+	cmsis_os.c
+	system_stm32h7xx.c
+)

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/freertos.c

@@ -0,0 +1,79 @@
+/**
+  ******************************************************************************
+  * File Name          : freertos.c
+  * Description        : Code for freertos applications
+  ******************************************************************************
+  * This notice applies to any and all portions of this file
+  * that are not between comment pairs USER CODE BEGIN and
+  * USER CODE END. Other portions of this file, whether 
+  * inserted by the user or by software development tools
+  * are owned by their respective copyright owners.
+  *
+  * Copyright (c) 2018 STMicroelectronics International N.V. 
+  * All rights reserved.
+  *
+  * Redistribution and use in source and binary forms, with or without 
+  * modification, are permitted, provided that the following conditions are met:
+  *
+  * 1. Redistribution of source code must retain the above copyright notice, 
+  *    this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright notice,
+  *    this list of conditions and the following disclaimer in the documentation
+  *    and/or other materials provided with the distribution.
+  * 3. Neither the name of STMicroelectronics nor the names of other 
+  *    contributors to this software may be used to endorse or promote products 
+  *    derived from this software without specific written permission.
+  * 4. This software, including modifications and/or derivative works of this 
+  *    software, must execute solely and exclusively on microcontroller or
+  *    microprocessor devices manufactured by or for STMicroelectronics.
+  * 5. Redistribution and use of this software other than as permitted under 
+  *    this license is void and will automatically terminate your rights under 
+  *    this license. 
+  *
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" 
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
+  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
+  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include <portmacro.h>
+
+/* USER CODE BEGIN Includes */
+void vRequestContextSwitchFromISR() {
+	portYIELD_FROM_ISR(pdTRUE);
+}
+
+/* USER CODE END Includes */
+
+/* Variables -----------------------------------------------------------------*/
+
+/* USER CODE BEGIN Variables */
+
+/* USER CODE END Variables */
+
+/* Function prototypes -------------------------------------------------------*/
+
+/* USER CODE BEGIN FunctionPrototypes */
+
+/* USER CODE END FunctionPrototypes */
+
+/* Hook prototypes */
+
+/* USER CODE BEGIN Application */
+     
+/* USER CODE END Application */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/hardware_init.c

@@ -0,0 +1,267 @@
+#include "hardware_init.h"
+
+#include <stm32h743xx.h>
+#include <stm32h7xx_hal_rcc_ex.h>
+#include <stm32h7xx_nucleo.h>
+
+#include <app_ethernet.h>
+#include <common/stm32_nucleo/networking/ethernetif.h>
+#include <lwip/netif.h>
+#include <lwip/init.h>
+#include <lwip/ip_addr.h>
+#include <netif/ethernet.h>
+
+#include <boardconfig.h>
+#include <stdio.h>
+
+/* Forward declarations */
+void MPU_Config(void);
+void SystemClock_Config(void);
+void BSP_Config(void);
+void CPU_CACHE_Enable(void);
+void MX_USART3_UART_Init(uint32_t baudRate);
+
+/**
+ * ST-LINK UART3
+ * CN5 pins on board
+ */
+UART_HandleTypeDef huart3;
+GPIO_InitTypeDef gpio_uart_init_struct;
+struct netif gnetif;
+bool debugAvailable = false;
+
+void performHardwareInit() {
+	/* Configure the MPU attributes as Device memory for ETH DMA descriptors */
+	MPU_Config();
+
+	/* Enable the CPU Cache */
+	CPU_CACHE_Enable();
+
+	MX_USART3_UART_Init(DEBUG_UART_BAUDRATE);
+
+	HAL_StatusTypeDef retval = HAL_Init();
+	if(retval != HAL_OK) {
+		printf("Error: HAL initialization failed!\n\r");
+	}
+
+	/* Configure the system clock to 400 MHz */
+	SystemClock_Config();
+
+	BSP_Config();
+}
+void MX_USART3_UART_Init(uint32_t baudRate)
+{
+	__HAL_RCC_USART3_CONFIG(RCC_USART3CLKSOURCE_HSI);
+	__HAL_RCC_GPIOD_CLK_ENABLE();
+	__HAL_RCC_USART3_CLK_ENABLE();
+	/*Configure GPIO pins : PD8 PD9 */
+	gpio_uart_init_struct.Pin = GPIO_PIN_8|GPIO_PIN_9;
+	gpio_uart_init_struct.Mode = GPIO_MODE_AF_PP;
+	gpio_uart_init_struct.Pull = GPIO_NOPULL;
+	gpio_uart_init_struct.Speed = GPIO_SPEED_FREQ_LOW;
+	gpio_uart_init_struct.Alternate = GPIO_AF7_USART3;
+	HAL_GPIO_Init(GPIOD, &gpio_uart_init_struct);
+
+	int result;
+	huart3.Instance = USART3;
+	huart3.Init.BaudRate = baudRate;
+	huart3.Init.WordLength = UART_WORDLENGTH_8B;
+	huart3.Init.StopBits = UART_STOPBITS_1;
+	huart3.Init.Parity = UART_PARITY_NONE;
+	huart3.Init.Mode = UART_MODE_TX_RX;
+	huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+	huart3.Init.OverSampling = UART_OVERSAMPLING_16;
+	huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+	huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+	//huart3.Init.FIFOMode = UART_FIFOMODE_DISABLE;
+	//huart3.Init.TXFIFOThreshold = UART_TXFIFO_THRESHOLD_1_8;
+	//huart3.Init.RXFIFOThreshold = UART_RXFIFO_THRESHOLD_1_8;
+	huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+	// we can't do error handling (simple print out first) here because UART3 is our print interface
+	result = HAL_UART_Init(&huart3);
+	if(result == HAL_OK) {
+		//print_uart3("\rUART3 configured successfully !\r\n\0");
+		debugAvailable = true;
+	}
+}
+
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE BYPASS)
+  *            SYSCLK(Hz)                     = 400000000 (CPU Clock)
+  *            HCLK(Hz)                       = 200000000 (AXI and AHBs Clock)
+  *            AHB Prescaler                  = 2
+  *            D1 APB3 Prescaler              = 2 (APB3 Clock  100MHz)
+  *            D2 APB1 Prescaler              = 2 (APB1 Clock  100MHz)
+  *            D2 APB2 Prescaler              = 2 (APB2 Clock  100MHz)
+  *            D3 APB4 Prescaler              = 2 (APB4 Clock  100MHz)
+  *            HSE Frequency(Hz)              = 8000000
+  *            PLL_M                          = 4
+  *            PLL_N                          = 400
+  *            PLL_P                          = 2
+  *            PLL_Q                          = 4
+  *            PLL_R                          = 2
+  *            VDD(V)                         = 3.3
+  *            Flash Latency(WS)              = 4
+  * @param  None
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+	RCC_ClkInitTypeDef RCC_ClkInitStruct;
+	RCC_OscInitTypeDef RCC_OscInitStruct;
+	HAL_StatusTypeDef ret = HAL_OK;
+
+	/*!< Supply configuration update enable */
+	MODIFY_REG(PWR->CR3, PWR_CR3_SCUEN, 0); // @suppress("Field cannot be resolved")
+
+	/* The voltage scaling allows optimizing the power consumption when the device is
+     clocked below the maximum system frequency, to update the voltage scaling value
+     regarding system frequency refer to product datasheet.  */
+	__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); // @suppress("Field cannot be resolved")
+
+	while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {} // @suppress("Field cannot be resolved")
+
+	/* Enable D2 domain SRAM3 Clock (0x30040000 AXI)*/
+	__HAL_RCC_D2SRAM3_CLK_ENABLE(); // @suppress("Field cannot be resolved")
+
+	/* Enable HSE Oscillator and activate PLL with HSE as source */
+	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+	RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
+	RCC_OscInitStruct.HSIState = RCC_HSI_OFF;
+	RCC_OscInitStruct.CSIState = RCC_CSI_OFF;
+	RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+	RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+
+	RCC_OscInitStruct.PLL.PLLM = 4;
+	RCC_OscInitStruct.PLL.PLLN = 400;
+	RCC_OscInitStruct.PLL.PLLP = 2;
+	RCC_OscInitStruct.PLL.PLLR = 2;
+	RCC_OscInitStruct.PLL.PLLQ = 4;
+
+	RCC_OscInitStruct.PLL.PLLVCOSEL = RCC_PLL1VCOWIDE;
+	RCC_OscInitStruct.PLL.PLLRGE = RCC_PLL1VCIRANGE_2;
+	ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
+	if(ret != HAL_OK)
+	{
+		while(1);
+	}
+
+	/* Select PLL as system clock source and configure  bus clocks dividers */
+	RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK |
+	        RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2  |
+	        RCC_CLOCKTYPE_D3PCLK1);
+
+	RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+	RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
+	RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;
+	RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV2;
+	RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2;
+	RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV2;
+	RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV2;
+	ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_4);
+	if(ret != HAL_OK)
+	{
+		while(1);
+	}
+}
+
+/*Configure the MPU attributes */
+void MPU_Config(void)
+{
+	MPU_Region_InitTypeDef MPU_InitStruct;
+
+	/* Disable the MPU */
+	HAL_MPU_Disable();
+
+	/* Configure the MPU attributes as Device not cacheable
+     for ETH DMA descriptors */
+	MPU_InitStruct.Enable = MPU_REGION_ENABLE;
+	MPU_InitStruct.BaseAddress = 0x30040000;
+	MPU_InitStruct.Size = MPU_REGION_SIZE_256B;
+	MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
+	MPU_InitStruct.IsBufferable = MPU_ACCESS_BUFFERABLE;
+	MPU_InitStruct.IsCacheable = MPU_ACCESS_NOT_CACHEABLE;
+	MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
+	MPU_InitStruct.Number = MPU_REGION_NUMBER0;
+	MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
+	MPU_InitStruct.SubRegionDisable = 0x00;
+	MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE;
+
+	HAL_MPU_ConfigRegion(&MPU_InitStruct);
+
+	/* Configure the MPU attributes as Cacheable write through
+     for LwIP RAM heap which contains the Tx buffers */
+	MPU_InitStruct.Enable = MPU_REGION_ENABLE;
+	MPU_InitStruct.BaseAddress = 0x30044000;
+	MPU_InitStruct.Size = MPU_REGION_SIZE_16KB;
+	MPU_InitStruct.AccessPermission = MPU_REGION_FULL_ACCESS;
+	MPU_InitStruct.IsBufferable = MPU_ACCESS_NOT_BUFFERABLE;
+	MPU_InitStruct.IsCacheable = MPU_ACCESS_CACHEABLE;
+	MPU_InitStruct.IsShareable = MPU_ACCESS_NOT_SHAREABLE;
+	MPU_InitStruct.Number = MPU_REGION_NUMBER1;
+	MPU_InitStruct.TypeExtField = MPU_TEX_LEVEL0;
+	MPU_InitStruct.SubRegionDisable = 0x00;
+	MPU_InitStruct.DisableExec = MPU_INSTRUCTION_ACCESS_ENABLE;
+
+	HAL_MPU_ConfigRegion(&MPU_InitStruct);
+
+	/* Enable the MPU */
+	HAL_MPU_Enable(MPU_PRIVILEGED_DEFAULT);
+}
+
+/*CPU L1-Cache enable*/
+void CPU_CACHE_Enable(void)
+{
+	/* Enable I-Cache */
+	SCB_EnableICache();
+
+	/* Enable D-Cache */
+	SCB_EnableDCache();
+}
+
+void BSP_Config(void)
+{
+	BSP_LED_Init(LED1);
+	BSP_LED_Init(LED2);
+	BSP_LED_Init(LED3);
+}
+
+
+void Netif_Config(void)
+{
+	ip_addr_t ipaddr;
+	ip_addr_t netmask;
+	ip_addr_t gw;
+#if LWIP_DHCP
+	ip_addr_set_zero_ip4(&ipaddr);
+	ip_addr_set_zero_ip4(&netmask);
+	ip_addr_set_zero_ip4(&gw);
+#else
+
+	/* IP address default setting */
+	set_lwip_addresses(&ipaddr, &netmask, &gw);
+
+#endif
+
+	/* add the network interface */
+	struct netif* netif_valid = netif_add(&gnetif, (ip4_addr_t*)&ipaddr,
+			(ip4_addr_t*)&netmask, (ip4_addr_t*) &gw, NULL, &ethernetif_init,
+			&ethernet_input);
+	if(netif_valid == NULL) {
+		printf("Error: netif initialization failed!\n\r");
+		return;
+	}
+	/*  Registers the default network interface */
+	netif_set_default(&gnetif);
+
+	ethernet_link_status_updated(&gnetif);
+
+#if LWIP_NETIF_LINK_CALLBACK
+	netif_set_link_callback(&gnetif, ethernet_link_status_updated);
+#endif
+}
+
+

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/stm32h7xx_hal_timebase_tim.c

@@ -0,0 +1,168 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_timebase_tim.c 
+  * @author  MCD Application Team
+  * @brief   HAL time base based on the hardware TIM.
+  *    
+  *          This file overrides the native HAL time base functions (defined as weak)
+  *          the TIM time base:
+  *           + Intializes the TIM peripheral generate a Period elapsed Event each 1ms
+  *           + HAL_IncTick is called inside HAL_TIM_PeriodElapsedCallback ie each 1ms
+  * 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+TIM_HandleTypeDef        TimHandle;
+/* Private function prototypes -----------------------------------------------*/
+void TIM6_DAC_IRQHandler(void);
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief  This function configures the TIM6 as a time base source. 
+  *         The time source is configured to have 1ms time base with a dedicated 
+  *         Tick interrupt priority. 
+  * @note   This function is called  automatically at the beginning of program after
+  *         reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). 
+  * @param  TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority)
+{
+  RCC_ClkInitTypeDef    clkconfig;
+  uint32_t              uwTimclock, uwAPB1Prescaler = 0U;
+  uint32_t              uwPrescalerValue = 0U;
+  uint32_t              pFLatency;
+  
+    /*Configure the TIM6 IRQ priority */
+  HAL_NVIC_SetPriority(TIM6_DAC_IRQn, TickPriority ,0U);
+  
+  /* Enable the TIM6 global Interrupt */
+  HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn);
+  
+  /* Enable TIM6 clock */
+  __HAL_RCC_TIM6_CLK_ENABLE();
+  
+  /* Get clock configuration */
+  HAL_RCC_GetClockConfig(&clkconfig, &pFLatency);
+  
+  /* Get APB1 prescaler */
+  uwAPB1Prescaler = clkconfig.APB1CLKDivider;
+  
+  /* Compute TIM6 clock */
+  if (uwAPB1Prescaler == RCC_HCLK_DIV1) 
+  {
+    uwTimclock = HAL_RCC_GetPCLK1Freq();
+  }
+  else
+  {
+    uwTimclock = 2*HAL_RCC_GetPCLK1Freq();
+  }
+  
+  /* Compute the prescaler value to have TIM6 counter clock equal to 1MHz */
+  uwPrescalerValue = (uint32_t) ((uwTimclock / 1000000U) - 1U);
+  
+  /* Initialize TIM6 */
+  TimHandle.Instance = TIM6;
+  
+  /* Initialize TIMx peripheral as follow:
+  + Period = [(TIM6CLK/1000) - 1]. to have a (1/1000) s time base.
+  + Prescaler = (uwTimclock/1000000 - 1) to have a 1MHz counter clock.
+  + ClockDivision = 0
+  + Counter direction = Up
+  */
+  TimHandle.Init.Period = (1000000U / 1000U) - 1U;
+  TimHandle.Init.Prescaler = uwPrescalerValue;
+  TimHandle.Init.ClockDivision = 0;
+  TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
+  if(HAL_TIM_Base_Init(&TimHandle) == HAL_OK)
+  {
+    /* Start the TIM time Base generation in interrupt mode */
+    return HAL_TIM_Base_Start_IT(&TimHandle);
+  }
+  
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Suspend Tick increment.
+  * @note   Disable the tick increment by disabling TIM6 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_SuspendTick(void)
+{
+  /* Disable TIM6 update Interrupt */
+  __HAL_TIM_DISABLE_IT(&TimHandle, TIM_IT_UPDATE);
+}
+
+/**
+  * @brief  Resume Tick increment.
+  * @note   Enable the tick increment by Enabling TIM6 update interrupt.
+  * @param  None
+  * @retval None
+  */
+void HAL_ResumeTick(void)
+{
+  /* Enable TIM6 Update interrupt */
+  __HAL_TIM_ENABLE_IT(&TimHandle, TIM_IT_UPDATE);
+}
+
+/**
+  * @brief  Period elapsed callback in non blocking mode
+  * @note   This function is called  when TIM6 interrupt took place, inside
+  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
+  * a global variable "uwTick" used as application time base.
+  * @param  htim : TIM handle
+  * @retval None
+  */
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  HAL_IncTick();
+}
+
+/**
+  * @brief  This function handles TIM interrupt request.
+  * @param  None
+  * @retval None
+  */
+void TIM6_DAC_IRQHandler(void)
+{
+  HAL_TIM_IRQHandler(&TimHandle);
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/stm32h7xx_it.c

@@ -0,0 +1,162 @@
+/**
+  ******************************************************************************
+  * @file    LwIP/LwIP_HTTP_Server_Netconn_RTOS/Src/stm32h7xx_it.c 
+  * @author  MCD Application Team
+  * @brief   Main Interrupt Service Routines.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_it.h"
+
+#include "cmsis_os.h"
+#include "main.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+extern ETH_HandleTypeDef EthHandle;
+/* Private function prototypes -----------------------------------------------*/
+void ETH_IRQHandler(void);
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M7 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief   This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+  osSystickHandler();
+}
+  
+
+/******************************************************************************/
+/*                 STM32H7xx Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32h7xx.s).                                               */
+/******************************************************************************/
+/**
+  * @brief  This function handles Ethernet interrupt request.
+  * @param  None
+  * @retval None
+  */
+void ETH_IRQHandler(void)
+{
+  HAL_ETH_IRQHandler(&EthHandle);
+}
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/syscalls.c

@@ -0,0 +1,154 @@
+/*!
+ * @file	syscalls.c
+ * Implements some base-level for libc for heap management and printing on
+ * the debug port.
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <stdio.h>
+
+#include <hardware_init.h>
+#include <boardconfig.h>
+
+
+#define AUTO_RETURN_AFTER_NEWLINE	1
+
+// _write currently adds \n after \r automatically.
+// If the At91lib\utility\stdio.c printf implementation is not used anymore:
+// remove if there are spurious newlines!
+
+//int _read(int file, void *ptr, size_t len) {
+//	(void)len;
+//	if(file <= STDERR_FILENO) {
+//		*(char *) ptr = DBGU_GetChar();
+//#if AUTO_RETURN_AFTER_NEWLINE
+//		if((*(char *) ptr != '\n') && (*(char *) ptr != '\r')) {
+//			DBGU_PutChar(*(char *) ptr);
+//		}
+//		else if(*(char *) ptr == '\r') {
+//			DBGU_PutChar('\n');
+//			DBGU_PutChar('\r');
+//		}
+//#endif
+//		return 1;
+//	}
+//	else {
+//		return -1;
+//	}
+//
+//}
+
+int _write(int file, const void *ptr, size_t len) {
+	size_t i;
+
+	if(file <= STDERR_FILENO) {
+		for(i=0; i<len; i++) {
+#if AUTO_RETURN_AFTER_NEWLINE
+			if(((const char *) ptr)[i] == '\n' &&
+					((const char *) ptr)[i+1] != '\r') {
+				HAL_UART_Transmit(&huart3, (uint8_t*)"\r", 1 ,
+						DEBUG_UART_MS_TIMEOUT);
+			}
+#endif
+			uint8_t* character = (uint8_t*) ptr;
+			HAL_UART_Transmit(&huart3, (uint8_t*) (character + i),
+					1 , DEBUG_UART_MS_TIMEOUT);
+		}
+		return len;
+	} else {
+		return -1;
+	}
+
+}
+
+int _lseek (int file, int ptr, int dir) {
+	(void)file;
+	(void)ptr;
+	(void)dir;
+	return 0;
+}
+
+int _close(int file) {
+	(void)file;
+	return -1;
+}
+
+int _open(const char *name, int flags, ...) {
+	(void)name;
+	(void)flags;
+	return -1;
+}
+
+int _link(const char *oldpath, const char *newpath) {
+	(void)oldpath;
+	(void)newpath;
+	return -1;
+}
+
+int _rename(const char *oldpath, const char *newpath) {
+	(void)oldpath;
+	(void)newpath;
+	return -1;
+}
+
+int _unlink(const char *pathname) {
+	(void)pathname;
+	return -1;
+}
+
+int fsync(int fd) {
+	(void)fd;
+	return -1;
+}
+
+int _fstat(int fd, struct stat *st) {
+	(void)fd;
+	(void)st;
+	return -1;
+}
+
+int _stat(const char *path, struct stat *st) {
+	(void)path;
+	(void)st;
+	return -1;
+}
+
+int _isatty(int fd) {
+	if(fd <= STDERR_FILENO) {
+		return 1;
+	}
+	else {
+		return 0;
+	}
+}
+
+void exit(int n) {
+	printf("\n\r EXITING WITH CODE: %u \n\r", n);
+	//restart();
+	while(1);
+}
+
+void _exit(int n) {
+	printf("\n\r EXITING WITH CODE: %u \n\r", n);
+	//restart();
+	while(1);
+}
+
+int _kill() {
+	return -1;
+}
+
+int _getpid() {
+	return 1;
+}
+
+int _gettimeofday() {
+	return -1;
+}

bsp_stm32_freertos/STM32CubeH7/Boards/NUCLEO-H743ZI/Src/system_stm32h7xx.c

@@ -0,0 +1,576 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32h7xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32h7xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32h7xx_system
+  * @{
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32h7xx.h"
+
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
+     on EVAL board as data memory  */
+/*#define DATA_IN_ExtSRAM */
+/*#define DATA_IN_ExtSDRAM*/
+
+#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
+ #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00       /*!< Vector Table base offset field.
+                                      This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 64000000;
+  uint32_t SystemD2Clock = 64000000;
+  const  uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
+  * @{
+  */
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32H7xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= RCC_CR_HSION;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON , CSION,RC48ON, CSIKERON PLL1ON, PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEAF6ED7F;
+
+  /* Reset D1CFGR register */
+  RCC->D1CFGR = 0x00000000;
+
+  /* Reset D2CFGR register */
+  RCC->D2CFGR = 0x00000000;
+
+  /* Reset D3CFGR register */
+  RCC->D3CFGR = 0x00000000;
+
+  /* Reset PLLCKSELR register */
+  RCC->PLLCKSELR = 0x00000000;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x00000000;
+  /* Reset PLL1DIVR register */
+  RCC->PLL1DIVR = 0x00000000;
+  /* Reset PLL1FRACR register */
+  RCC->PLL1FRACR = 0x00000000;
+
+  /* Reset PLL2DIVR register */
+  RCC->PLL2DIVR = 0x00000000;
+
+  /* Reset PLL2FRACR register */
+
+  RCC->PLL2FRACR = 0x00000000;
+  /* Reset PLL3DIVR register */
+  RCC->PLL3DIVR = 0x00000000;
+
+  /* Reset PLL3FRACR register */
+  RCC->PLL3FRACR = 0x00000000;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIER = 0x00000000;
+
+  /* Change  the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
+  *((__IO uint32_t*)0x51008108) = 0x00000001;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = D1_AXISRAM_BASE  | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal ITCMSRAM */
+#else
+  SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET;       /* Vector Table Relocation in Internal FLASH */
+#endif
+
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock , it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
+  *             HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
+  *
+  *         (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *             4 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *         (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *             64 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
+  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+uint32_t pllp = 2, pllsource = 0, pllm = 2 ,tmp, pllfracen  =0 , hsivalue = 0;
+float fracn1, pllvco = 0 ;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+  case 0x00:  /* HSI used as system clock source */
+    SystemCoreClock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
+    break;
+
+  case 0x08:  /* CSI used as system clock  source */
+    SystemCoreClock = CSI_VALUE;
+    break;
+
+  case 0x10:  /* HSE used as system clock  source */
+    SystemCoreClock = HSE_VALUE;
+    break;
+
+  case 0x18:  /* PLL1 used as system clock  source */
+
+    /* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
+    SYSCLK = PLL_VCO / PLLR
+    */
+    pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
+    pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4)  ;
+    pllfracen = RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN;
+    fracn1 = (pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
+    switch (pllsource)
+    {
+
+    case 0x00:  /* HSI used as PLL clock source */
+      hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
+      pllvco = (hsivalue/ pllm) * ((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/0x2000) +1 );
+      break;
+
+    case 0x01:  /* CSI used as PLL clock source */
+      pllvco = (CSI_VALUE / pllm) * ((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/0x2000) +1 );
+      break;
+
+    case 0x02:  /* HSE used as PLL clock source */
+      pllvco = (HSE_VALUE / pllm) * ((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/0x2000) +1 );
+      break;
+
+    default:
+      pllvco = (CSI_VALUE / pllm) * ((RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/0x2000) +1 );
+      break;
+    }
+    pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1 ) ;
+    SystemCoreClock = (uint32_t) (pllvco/pllp);
+    break;
+
+  default:
+    SystemCoreClock = CSI_VALUE;
+    break;
+  }
+
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> POSITION_VAL(RCC_D1CFGR_D1CPRE_0)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32h7xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+      clock */
+  RCC->AHB4ENR |= 0x000001F8;
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAFEAFFFA;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+   GPIOD->PUPDR   = 0x55555505;
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAABFFA;
+  /* Configure PEx pins speed to 50 MHz */
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x55554005;
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCC000;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAABFFAAA;
+  /* Configure PFx pins speed to 50 MHz */
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x55400555;
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0xC000000C;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0xBFFEFAAA;
+ /* Configure PGx pins speed to 50 MHz */
+  GPIOG->OSPEEDR = 0x80020AAA;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x40010515;
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0xCCC00000;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */
+  GPIOH->MODER   = 0xAAAAABFF;
+  /* Configure PHx pins speed to 50 MHz */
+  GPIOH->OSPEEDR = 0xAAAAA800;
+  /* Configure PHx pins Output type to push-pull */
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */
+  GPIOH->PUPDR   = 0x55555400;
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */
+  GPIOI->MODER   = 0xFFEBAAAA;
+  /* Configure PIx pins speed to 50 MHz */
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */
+  GPIOI->PUPDR   = 0x00145555;
+/*-- FMC Configuration ------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN));
+  /*SDRAM Timing and access interface configuration*/
+  /*LoadToActiveDelay  = 2
+    ExitSelfRefreshDelay = 6
+    SelfRefreshTime      = 4
+    RowCycleDelay        = 6
+    WriteRecoveryTime    = 2
+    RPDelay              = 2
+    RCDDelay             = 2
+    SDBank             = FMC_SDRAM_BANK2
+    ColumnBitsNumber   = FMC_SDRAM_COLUMN_BITS_NUM_9
+    RowBitsNumber      = FMC_SDRAM_ROW_BITS_NUM_12
+    MemoryDataWidth    = FMC_SDRAM_MEM_BUS_WIDTH_32
+    InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4
+    CASLatency         = FMC_SDRAM_CAS_LATENCY_2
+    WriteProtection    = FMC_SDRAM_WRITE_PROTECTION_DISABLE
+    SDClockPeriod      = FMC_SDRAM_CLOCK_PERIOD_2
+    ReadBurst          = FMC_SDRAM_RBURST_ENABLE
+    ReadPipeDelay      = FMC_SDRAM_RPIPE_DELAY_0*/
+
+  FMC_Bank5_6->SDCR[0] = 0x00001800;
+  FMC_Bank5_6->SDCR[1] = 0x00000165;
+  FMC_Bank5_6->SDTR[0] = 0x00105000;
+  FMC_Bank5_6->SDTR[1] = 0x01010351;
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000009;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+
+  /* PALL command */
+    FMC_Bank5_6->SDCMR = 0x0000000A;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  FMC_Bank5_6->SDCMR = 0x000000EB;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  FMC_Bank5_6->SDCMR = 0x0004400C;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1));
+
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[1];
+  FMC_Bank5_6->SDCR[1] = (tmpreg & 0xFFFFFDFF);
+
+   /*FMC controller Enable*/
+  FMC_Bank1->BTCR[0]  |= 0x80000000;
+
+
+#endif /* DATA_IN_ExtSDRAM */
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB4ENR   |= 0x00000078;
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x55550545;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x55554145;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x55000555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0x00200AAA;
+  /* Configure PGx pins speed to 100 MHz */
+  GPIOG->OSPEEDR = 0x00300FFF;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00100555;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+ (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN));
+
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[4]  = 0x00001091;
+  FMC_Bank1->BTCR[5]  = 0x00110212;
+  FMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
+
+  /*FMC controller Enable*/
+  FMC_Bank1->BTCR[0]  |= 0x80000000;
+
+
+#endif /* DATA_IN_ExtSRAM */
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/CMakeLists.txt

@@ -0,0 +1,3 @@
+add_subdirectory(Boards)
+add_subdirectory(Middlewares)
+add_subdirectory(Drivers)

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/BSP.mk

@@ -0,0 +1,32 @@
+STM32_DRIV_PATH = STM32H7xx_HAL_Driver
+
+ifeq ($(BOARD_NAME), stm32h743zi)
+INCLUDES += $(CURRENTPATH)/STM32H7xx_HAL_Driver/Inc
+INCLUDES += $(CURRENTPATH)/STM32H7xx_Nucleo
+INCLUDES += $(CURRENTPATH)/Components/lan8742
+
+CSRC += $(CURRENTPATH)/STM32H7xx_Nucleo/stm32h7xx_nucleo.c
+CSRC += $(CURRENTPATH)/Components/lan8742/lan8742.c
+
+# Only add whats required.
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_gpio.c
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal.c
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_cortex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_tim.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_tim_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_rcc.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_rcc_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_flash.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_flash_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_hsem.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_dma.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_dma_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_mdma.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_pwr.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_pwr_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_i2c.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_i2c_ex.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_uart.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_eth.c 
+CSRC += $(CURRENTPATH)/$(STM32_DRIV_PATH)/Src/stm32h7xx_hal_adc.c 
+endif

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/CMakeLists.txt

@@ -0,0 +1,3 @@
+add_subdirectory(Components)
+add_subdirectory(STM32H7xx_HAL_Driver)
+add_subdirectory(STM32H7xx_Nucleo)

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/Components/CMakeLists.txt

@@ -0,0 +1 @@
+add_subdirectory(lan8742)

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/Components/lan8742/CMakeLists.txt

@@ -0,0 +1,7 @@
+target_sources(${TARGET_NAME} PRIVATE
+	lan8742.c
+)
+
+target_include_directories(${TARGET_NAME} PRIVATE
+	${CMAKE_CURRENT_SOURCE_DIR}
+)

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/Components/lan8742/lan8742.c

@@ -0,0 +1,664 @@
+/** 
+  ******************************************************************************
+  * @file    lan8742.c
+  * @author  MCD Application Team
+  * @brief   This file provides a set of functions needed to manage the LAN742
+  *          PHY devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */  
+
+/* Includes ------------------------------------------------------------------*/
+#include "lan8742.h"
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup Component
+  * @{
+  */ 
+  
+/** @defgroup LAN8742 LAN8742
+  * @{
+  */   
+  
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup LAN8742_Private_Defines LAN8742 Private Defines
+  * @{
+  */
+#define LAN8742_SW_RESET_TO    ((uint32_t)500U)
+#define LAN8742_INIT_TO        ((uint32_t)2000U)
+#define LAN8742_MAX_DEV_ADDR   ((uint32_t)31U)
+/**
+  * @}
+  */
+ 
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LAN8742_Private_Functions LAN8742 Private Functions
+  * @{
+  */
+    
+/**
+  * @brief  Register IO functions to component object
+  * @param  pObj: device object  of LAN8742_Object_t. 
+  * @param  ioctx: holds device IO functions.  
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_ERROR if missing mandatory function
+  */
+int32_t  LAN8742_RegisterBusIO(lan8742_Object_t *pObj, lan8742_IOCtx_t *ioctx)
+{
+  if(!pObj || !ioctx->ReadReg || !ioctx->WriteReg || !ioctx->GetTick)
+  {
+    return LAN8742_STATUS_ERROR;
+  }
+  
+  pObj->IO.Init = ioctx->Init;
+  pObj->IO.DeInit = ioctx->DeInit;
+  pObj->IO.ReadReg = ioctx->ReadReg;
+  pObj->IO.WriteReg = ioctx->WriteReg;
+  pObj->IO.GetTick = ioctx->GetTick;
+  
+  return LAN8742_STATUS_OK;
+}
+
+/**
+  * @brief  Initialize the lan8742 and configure the needed hardware resources
+  * @param  pObj: device object LAN8742_Object_t. 
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_ADDRESS_ERROR if cannot find device address
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  *         LAN8742_STATUS_RESET_TIMEOUT if cannot perform a software reset
+  */
+ int32_t LAN8742_Init(lan8742_Object_t *pObj)
+ {
+   uint32_t tickstart = 0, regvalue = 0, addr = 0;
+   int32_t status = LAN8742_STATUS_OK;
+   
+   if(pObj->Is_Initialized == 0)
+   {
+     if(pObj->IO.Init != 0)
+     {
+       /* GPIO and Clocks initialization */
+       pObj->IO.Init();
+     }
+   
+     /* for later check */
+     pObj->DevAddr = LAN8742_MAX_DEV_ADDR + 1;
+   
+     /* Get the device address from special mode register */  
+     for(addr = 0; addr <= LAN8742_MAX_DEV_ADDR; addr ++)
+     {
+       if(pObj->IO.ReadReg(addr, LAN8742_SMR, &regvalue) < 0)
+       { 
+         status = LAN8742_STATUS_READ_ERROR;
+         /* Can't read from this device address 
+            continue with next address */
+         continue;
+       }
+     
+       if((regvalue & LAN8742_SMR_PHY_ADDR) == addr)
+       {
+         pObj->DevAddr = addr;
+         status = LAN8742_STATUS_OK;
+         break;
+       }
+     }
+   
+     if(pObj->DevAddr > LAN8742_MAX_DEV_ADDR)
+     {
+       status = LAN8742_STATUS_ADDRESS_ERROR;
+     }
+     
+     /* if device address is matched */
+     if(status == LAN8742_STATUS_OK)
+     {
+       /* set a software reset  */
+       if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, LAN8742_BCR_SOFT_RESET) >= 0)
+       { 
+         /* get software reset status */
+         if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &regvalue) >= 0)
+         { 
+           tickstart = pObj->IO.GetTick();
+           
+           /* wait until software reset is done or timeout occured  */
+           while(regvalue & LAN8742_BCR_SOFT_RESET)
+           {
+             if((pObj->IO.GetTick() - tickstart) <= LAN8742_SW_RESET_TO)
+             {
+               if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &regvalue) < 0)
+               { 
+                 status = LAN8742_STATUS_READ_ERROR;
+                 break;
+               }
+             }
+             else
+             {
+               status = LAN8742_STATUS_RESET_TIMEOUT;
+               break;
+             }
+           } 
+         }
+         else
+         {
+           status = LAN8742_STATUS_READ_ERROR;
+         }
+       }
+       else
+       {
+         status = LAN8742_STATUS_WRITE_ERROR;
+       }
+     }
+   }
+      
+   if(status == LAN8742_STATUS_OK)
+   {
+     tickstart =  pObj->IO.GetTick();
+     
+     /* Wait for 2s to perform initialization */
+     while((pObj->IO.GetTick() - tickstart) <= LAN8742_INIT_TO)
+     {
+     }
+     pObj->Is_Initialized = 1;
+   }
+   
+   return status;
+ }
+
+/**
+  * @brief  De-Initialize the lan8742 and it's hardware resources
+  * @param  pObj: device object LAN8742_Object_t. 
+  * @retval None
+  */
+int32_t LAN8742_DeInit(lan8742_Object_t *pObj)
+{
+  if(pObj->Is_Initialized)
+  {
+    if(pObj->IO.DeInit != 0)
+    {
+      if(pObj->IO.DeInit() < 0)
+      {
+        return LAN8742_STATUS_ERROR;
+      }
+    }
+  
+    pObj->Is_Initialized = 0;  
+  }
+  
+  return LAN8742_STATUS_OK;
+}
+
+/**
+  * @brief  Disable the LAN8742 power down mode.
+  * @param  pObj: device object LAN8742_Object_t.  
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
+  {
+    readval &= ~LAN8742_BCR_POWER_DOWN;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
+    {
+      status =  LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Enable the LAN8742 power down mode.
+  * @param  pObj: device object LAN8742_Object_t.  
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
+  {
+    readval |= LAN8742_BCR_POWER_DOWN;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
+    {
+      status =  LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Start the auto negotiation process.
+  * @param  pObj: device object LAN8742_Object_t.  
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
+  {
+    readval |= LAN8742_BCR_AUTONEGO_EN;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
+    {
+      status =  LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Get the link state of LAN8742 device.
+  * @param  pObj: Pointer to device object. 
+  * @param  pLinkState: Pointer to link state
+  * @retval LAN8742_STATUS_LINK_DOWN  if link is down
+  *         LAN8742_STATUS_AUTONEGO_NOTDONE if Auto nego not completed 
+  *         LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
+  *         LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
+  *         LAN8742_STATUS_10MBITS_FULLDUPLEX  if 10Mb/s FD
+  *         LAN8742_STATUS_10MBITS_HALFDUPLEX  if 10Mb/s HD       
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  
+  /* Read Status register  */
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0)
+  {
+    return LAN8742_STATUS_READ_ERROR;
+  }
+  
+  /* Read Status register again */
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BSR, &readval) < 0)
+  {
+    return LAN8742_STATUS_READ_ERROR;
+  }
+  
+  if((readval & LAN8742_BSR_LINK_STATUS) == 0)
+  {
+    /* Return Link Down status */
+    return LAN8742_STATUS_LINK_DOWN;    
+  }
+  
+  /* Check Auto negotiaition */
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) < 0)
+  {
+    return LAN8742_STATUS_READ_ERROR;
+  }
+  
+  if((readval & LAN8742_BCR_AUTONEGO_EN) != LAN8742_BCR_AUTONEGO_EN)
+  {
+    if(((readval & LAN8742_BCR_SPEED_SELECT) == LAN8742_BCR_SPEED_SELECT) && ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE)) 
+    {
+      return LAN8742_STATUS_100MBITS_FULLDUPLEX;
+    }
+    else if ((readval & LAN8742_BCR_SPEED_SELECT) == LAN8742_BCR_SPEED_SELECT)
+    {
+      return LAN8742_STATUS_100MBITS_HALFDUPLEX;
+    }        
+    else if ((readval & LAN8742_BCR_DUPLEX_MODE) == LAN8742_BCR_DUPLEX_MODE)
+    {
+      return LAN8742_STATUS_10MBITS_FULLDUPLEX;
+    }
+    else
+    {
+      return LAN8742_STATUS_10MBITS_HALFDUPLEX;
+    }  		
+  }
+  else /* Auto Nego enabled */
+  {
+    if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_PHYSCSR, &readval) < 0)
+    {
+      return LAN8742_STATUS_READ_ERROR;
+    }
+    
+    /* Check if auto nego not done */
+    if((readval & LAN8742_PHYSCSR_AUTONEGO_DONE) == 0)
+    {
+      return LAN8742_STATUS_AUTONEGO_NOTDONE;
+    }
+    
+    if((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_FD)
+    {
+      return LAN8742_STATUS_100MBITS_FULLDUPLEX;
+    }
+    else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_100BTX_HD)
+    {
+      return LAN8742_STATUS_100MBITS_HALFDUPLEX;
+    }
+    else if ((readval & LAN8742_PHYSCSR_HCDSPEEDMASK) == LAN8742_PHYSCSR_10BT_FD)
+    {
+      return LAN8742_STATUS_10MBITS_FULLDUPLEX;
+    }
+    else
+    {
+      return LAN8742_STATUS_10MBITS_HALFDUPLEX;
+    }				
+  }
+}
+
+/**
+  * @brief  Set the link state of LAN8742 device.
+  * @param  pObj: Pointer to device object. 
+  * @param  pLinkState: link state can be one of the following
+  *         LAN8742_STATUS_100MBITS_FULLDUPLEX if 100Mb/s FD
+  *         LAN8742_STATUS_100MBITS_HALFDUPLEX if 100Mb/s HD
+  *         LAN8742_STATUS_10MBITS_FULLDUPLEX  if 10Mb/s FD
+  *         LAN8742_STATUS_10MBITS_HALFDUPLEX  if 10Mb/s HD   
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_ERROR  if parameter error  
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState)
+{
+  uint32_t bcrvalue = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &bcrvalue) >= 0)
+  {
+    /* Disable link config (Auto nego, speed and duplex) */
+    bcrvalue &= ~(LAN8742_BCR_AUTONEGO_EN | LAN8742_BCR_SPEED_SELECT | LAN8742_BCR_DUPLEX_MODE);
+    
+    if(LinkState == LAN8742_STATUS_100MBITS_FULLDUPLEX)
+    {
+      bcrvalue |= (LAN8742_BCR_SPEED_SELECT | LAN8742_BCR_DUPLEX_MODE);
+    }
+    else if (LinkState == LAN8742_STATUS_100MBITS_HALFDUPLEX)
+    {
+      bcrvalue |= LAN8742_BCR_SPEED_SELECT;
+    }
+    else if (LinkState == LAN8742_STATUS_10MBITS_FULLDUPLEX)
+    {
+      bcrvalue |= LAN8742_BCR_DUPLEX_MODE;
+    }
+    else
+    {
+      /* Wrong link status parameter */
+      status = LAN8742_STATUS_ERROR;
+    }	
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+  
+  if(status == LAN8742_STATUS_OK)
+  {
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, bcrvalue) < 0)
+    {
+      status = LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Enable loopback mode.
+  * @param  pObj: Pointer to device object. 
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
+  {
+    readval |= LAN8742_BCR_LOOPBACK;
+    
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
+    {
+      status = LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Disable loopback mode.
+  * @param  pObj: Pointer to device object. 
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_BCR, &readval) >= 0)
+  {
+    readval &= ~LAN8742_BCR_LOOPBACK;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_BCR, readval) < 0)
+    {
+      status =  LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Enable IT source.
+  * @param  pObj: Pointer to device object. 
+  * @param  Interrupt: IT source to be enabled
+  *         should be a value or a combination of the following:
+  *         LAN8742_WOL_IT                     
+  *         LAN8742_ENERGYON_IT                
+  *         LAN8742_AUTONEGO_COMPLETE_IT       
+  *         LAN8742_REMOTE_FAULT_IT            
+  *         LAN8742_LINK_DOWN_IT               
+  *         LAN8742_AUTONEGO_LP_ACK_IT         
+  *         LAN8742_PARALLEL_DETECTION_FAULT_IT
+  *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0)
+  {
+    readval |= Interrupt;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0)
+    {
+      status =  LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Disable IT source.
+  * @param  pObj: Pointer to device object. 
+  * @param  Interrupt: IT source to be disabled
+  *         should be a value or a combination of the following:
+  *         LAN8742_WOL_IT                     
+  *         LAN8742_ENERGYON_IT                
+  *         LAN8742_AUTONEGO_COMPLETE_IT       
+  *         LAN8742_REMOTE_FAULT_IT            
+  *         LAN8742_LINK_DOWN_IT               
+  *         LAN8742_AUTONEGO_LP_ACK_IT         
+  *         LAN8742_PARALLEL_DETECTION_FAULT_IT
+  *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  *         LAN8742_STATUS_WRITE_ERROR if connot write to register
+  */
+int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_IMR, &readval) >= 0)
+  {
+    readval &= ~Interrupt;
+  
+    /* Apply configuration */
+    if(pObj->IO.WriteReg(pObj->DevAddr, LAN8742_IMR, readval) < 0)
+    {
+      status = LAN8742_STATUS_WRITE_ERROR;
+    }
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+   
+  return status;
+}
+
+/**
+  * @brief  Clear IT flag.
+  * @param  pObj: Pointer to device object. 
+  * @param  Interrupt: IT flag to be cleared
+  *         should be a value or a combination of the following:
+  *         LAN8742_WOL_IT                     
+  *         LAN8742_ENERGYON_IT                
+  *         LAN8742_AUTONEGO_COMPLETE_IT       
+  *         LAN8742_REMOTE_FAULT_IT            
+  *         LAN8742_LINK_DOWN_IT               
+  *         LAN8742_AUTONEGO_LP_ACK_IT         
+  *         LAN8742_PARALLEL_DETECTION_FAULT_IT
+  *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT
+  * @retval LAN8742_STATUS_OK  if OK
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  */
+int32_t  LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt)
+{
+  uint32_t readval = 0;
+  int32_t status = LAN8742_STATUS_OK;  
+  
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) < 0)
+  {
+    status =  LAN8742_STATUS_READ_ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Get IT Flag status.
+  * @param  pObj: Pointer to device object. 
+  * @param  Interrupt: IT Flag to be checked, 
+  *         should be a value or a combination of the following:
+  *         LAN8742_WOL_IT                     
+  *         LAN8742_ENERGYON_IT                
+  *         LAN8742_AUTONEGO_COMPLETE_IT       
+  *         LAN8742_REMOTE_FAULT_IT            
+  *         LAN8742_LINK_DOWN_IT               
+  *         LAN8742_AUTONEGO_LP_ACK_IT         
+  *         LAN8742_PARALLEL_DETECTION_FAULT_IT
+  *         LAN8742_AUTONEGO_PAGE_RECEIVED_IT  
+  * @retval 1 IT flag is SET
+  *         0 IT flag is RESET
+  *         LAN8742_STATUS_READ_ERROR if connot read register
+  */
+int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt)
+{
+  uint32_t readval = 0;
+  int32_t status = 0;
+
+  if(pObj->IO.ReadReg(pObj->DevAddr, LAN8742_ISFR, &readval) >= 0)
+  {
+    status = ((readval & Interrupt) == Interrupt);
+  }
+  else
+  {
+    status = LAN8742_STATUS_READ_ERROR;
+  }
+	
+  return status;
+}
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */      
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/Components/lan8742/lan8742.h

@@ -0,0 +1,448 @@
+/**
+  ******************************************************************************
+  * @file    lan8742.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the
+  *          lan8742.c PHY driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef LAN8742_H
+#define LAN8742_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif   
+   
+/* Includes ------------------------------------------------------------------*/
+#include <stdint.h>
+
+/** @addtogroup BSP
+  * @{
+  */ 
+
+/** @addtogroup Component
+  * @{
+  */
+    
+/** @defgroup LAN8742
+  * @{
+  */    
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LAN8742_Exported_Constants LAN8742 Exported Constants
+  * @{
+  */ 
+  
+/** @defgroup LAN8742_Registers_Mapping LAN8742 Registers Mapping
+  * @{
+  */ 
+#define LAN8742_BCR      ((uint16_t)0x0000U)
+#define LAN8742_BSR      ((uint16_t)0x0001U)
+#define LAN8742_PHYI1R   ((uint16_t)0x0002U)
+#define LAN8742_PHYI2R   ((uint16_t)0x0003U)
+#define LAN8742_ANAR     ((uint16_t)0x0004U)
+#define LAN8742_ANLPAR   ((uint16_t)0x0005U)
+#define LAN8742_ANER     ((uint16_t)0x0006U)
+#define LAN8742_ANNPTR   ((uint16_t)0x0007U)
+#define LAN8742_ANNPRR   ((uint16_t)0x0008U)
+#define LAN8742_MMDACR   ((uint16_t)0x000DU)
+#define LAN8742_MMDAADR  ((uint16_t)0x000EU)
+#define LAN8742_ENCTR    ((uint16_t)0x0010U)
+#define LAN8742_MCSR     ((uint16_t)0x0011U)
+#define LAN8742_SMR      ((uint16_t)0x0012U)
+#define LAN8742_TPDCR    ((uint16_t)0x0018U)
+#define LAN8742_TCSR     ((uint16_t)0x0019U)
+#define LAN8742_SECR     ((uint16_t)0x001AU)
+#define LAN8742_SCSIR    ((uint16_t)0x001BU)
+#define LAN8742_CLR      ((uint16_t)0x001CU)
+#define LAN8742_ISFR     ((uint16_t)0x001DU)
+#define LAN8742_IMR      ((uint16_t)0x001EU)
+#define LAN8742_PHYSCSR  ((uint16_t)0x001FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_BCR_Bit_Definition LAN8742 BCR Bit Definition
+  * @{
+  */    
+#define LAN8742_BCR_SOFT_RESET         ((uint16_t)0x8000U)
+#define LAN8742_BCR_LOOPBACK           ((uint16_t)0x4000U)
+#define LAN8742_BCR_SPEED_SELECT       ((uint16_t)0x2000U)
+#define LAN8742_BCR_AUTONEGO_EN        ((uint16_t)0x1000U)
+#define LAN8742_BCR_POWER_DOWN         ((uint16_t)0x0800U)
+#define LAN8742_BCR_ISOLATE            ((uint16_t)0x0400U)
+#define LAN8742_BCR_RESTART_AUTONEGO   ((uint16_t)0x0200U)
+#define LAN8742_BCR_DUPLEX_MODE        ((uint16_t)0x0100U) 
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_BSR_Bit_Definition LAN8742 BSR Bit Definition
+  * @{
+  */   
+#define LAN8742_BSR_100BASE_T4       ((uint16_t)0x8000U)
+#define LAN8742_BSR_100BASE_TX_FD    ((uint16_t)0x4000U)
+#define LAN8742_BSR_100BASE_TX_HD    ((uint16_t)0x2000U)
+#define LAN8742_BSR_10BASE_T_FD      ((uint16_t)0x1000U)
+#define LAN8742_BSR_10BASE_T_HD      ((uint16_t)0x0800U)
+#define LAN8742_BSR_100BASE_T2_FD    ((uint16_t)0x0400U)
+#define LAN8742_BSR_100BASE_T2_HD    ((uint16_t)0x0200U)
+#define LAN8742_BSR_EXTENDED_STATUS  ((uint16_t)0x0100U)
+#define LAN8742_BSR_AUTONEGO_CPLT    ((uint16_t)0x0020U)
+#define LAN8742_BSR_REMOTE_FAULT     ((uint16_t)0x0010U)
+#define LAN8742_BSR_AUTONEGO_ABILITY ((uint16_t)0x0008U)
+#define LAN8742_BSR_LINK_STATUS      ((uint16_t)0x0004U)
+#define LAN8742_BSR_JABBER_DETECT    ((uint16_t)0x0002U)
+#define LAN8742_BSR_EXTENDED_CAP     ((uint16_t)0x0001U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_PHYI1R_Bit_Definition LAN8742 PHYI1R Bit Definition
+  * @{
+  */
+#define LAN8742_PHYI1R_OUI_3_18           ((uint16_t)0xFFFFU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_PHYI2R_Bit_Definition LAN8742 PHYI2R Bit Definition
+  * @{
+  */
+#define LAN8742_PHYI2R_OUI_19_24          ((uint16_t)0xFC00U)
+#define LAN8742_PHYI2R_MODEL_NBR          ((uint16_t)0x03F0U)
+#define LAN8742_PHYI2R_REVISION_NBR       ((uint16_t)0x000FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ANAR_Bit_Definition LAN8742 ANAR Bit Definition
+  * @{
+  */
+#define LAN8742_ANAR_NEXT_PAGE               ((uint16_t)0x8000U)
+#define LAN8742_ANAR_REMOTE_FAULT            ((uint16_t)0x2000U)
+#define LAN8742_ANAR_PAUSE_OPERATION         ((uint16_t)0x0C00U)
+#define LAN8742_ANAR_PO_NOPAUSE              ((uint16_t)0x0000U)
+#define LAN8742_ANAR_PO_SYMMETRIC_PAUSE      ((uint16_t)0x0400U)
+#define LAN8742_ANAR_PO_ASYMMETRIC_PAUSE     ((uint16_t)0x0800U)
+#define LAN8742_ANAR_PO_ADVERTISE_SUPPORT    ((uint16_t)0x0C00U)
+#define LAN8742_ANAR_100BASE_TX_FD           ((uint16_t)0x0100U)
+#define LAN8742_ANAR_100BASE_TX              ((uint16_t)0x0080U)
+#define LAN8742_ANAR_10BASE_T_FD             ((uint16_t)0x0040U)
+#define LAN8742_ANAR_10BASE_T                ((uint16_t)0x0020U)
+#define LAN8742_ANAR_SELECTOR_FIELD          ((uint16_t)0x000FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ANLPAR_Bit_Definition LAN8742 ANLPAR Bit Definition
+  * @{
+  */
+#define LAN8742_ANLPAR_NEXT_PAGE            ((uint16_t)0x8000U)
+#define LAN8742_ANLPAR_REMOTE_FAULT         ((uint16_t)0x2000U)
+#define LAN8742_ANLPAR_PAUSE_OPERATION      ((uint16_t)0x0C00U)
+#define LAN8742_ANLPAR_PO_NOPAUSE           ((uint16_t)0x0000U)
+#define LAN8742_ANLPAR_PO_SYMMETRIC_PAUSE   ((uint16_t)0x0400U)
+#define LAN8742_ANLPAR_PO_ASYMMETRIC_PAUSE  ((uint16_t)0x0800U)
+#define LAN8742_ANLPAR_PO_ADVERTISE_SUPPORT ((uint16_t)0x0C00U)
+#define LAN8742_ANLPAR_100BASE_TX_FD        ((uint16_t)0x0100U)
+#define LAN8742_ANLPAR_100BASE_TX           ((uint16_t)0x0080U)
+#define LAN8742_ANLPAR_10BASE_T_FD          ((uint16_t)0x0040U)
+#define LAN8742_ANLPAR_10BASE_T             ((uint16_t)0x0020U)
+#define LAN8742_ANLPAR_SELECTOR_FIELD       ((uint16_t)0x000FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ANER_Bit_Definition LAN8742 ANER Bit Definition
+  * @{
+  */
+#define LAN8742_ANER_RX_NP_LOCATION_ABLE    ((uint16_t)0x0040U)
+#define LAN8742_ANER_RX_NP_STORAGE_LOCATION ((uint16_t)0x0020U)
+#define LAN8742_ANER_PARALLEL_DETECT_FAULT  ((uint16_t)0x0010U)
+#define LAN8742_ANER_LP_NP_ABLE             ((uint16_t)0x0008U)
+#define LAN8742_ANER_NP_ABLE                ((uint16_t)0x0004U)
+#define LAN8742_ANER_PAGE_RECEIVED          ((uint16_t)0x0002U)
+#define LAN8742_ANER_LP_AUTONEG_ABLE        ((uint16_t)0x0001U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ANNPTR_Bit_Definition LAN8742 ANNPTR Bit Definition
+  * @{
+  */
+#define LAN8742_ANNPTR_NEXT_PAGE         ((uint16_t)0x8000U)
+#define LAN8742_ANNPTR_MESSAGE_PAGE      ((uint16_t)0x2000U)
+#define LAN8742_ANNPTR_ACK2              ((uint16_t)0x1000U)
+#define LAN8742_ANNPTR_TOGGLE            ((uint16_t)0x0800U)
+#define LAN8742_ANNPTR_MESSAGGE_CODE     ((uint16_t)0x07FFU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ANNPRR_Bit_Definition LAN8742 ANNPRR Bit Definition
+  * @{
+  */
+#define LAN8742_ANNPTR_NEXT_PAGE         ((uint16_t)0x8000U)
+#define LAN8742_ANNPRR_ACK               ((uint16_t)0x4000U)
+#define LAN8742_ANNPRR_MESSAGE_PAGE      ((uint16_t)0x2000U)
+#define LAN8742_ANNPRR_ACK2              ((uint16_t)0x1000U)
+#define LAN8742_ANNPRR_TOGGLE            ((uint16_t)0x0800U)
+#define LAN8742_ANNPRR_MESSAGGE_CODE     ((uint16_t)0x07FFU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_MMDACR_Bit_Definition LAN8742 MMDACR Bit Definition
+  * @{
+  */
+#define LAN8742_MMDACR_MMD_FUNCTION       ((uint16_t)0xC000U) 
+#define LAN8742_MMDACR_MMD_FUNCTION_ADDR  ((uint16_t)0x0000U)
+#define LAN8742_MMDACR_MMD_FUNCTION_DATA  ((uint16_t)0x4000U)
+#define LAN8742_MMDACR_MMD_DEV_ADDR       ((uint16_t)0x001FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_ENCTR_Bit_Definition LAN8742 ENCTR Bit Definition
+  * @{
+  */
+#define LAN8742_ENCTR_TX_ENABLE             ((uint16_t)0x8000U)
+#define LAN8742_ENCTR_TX_TIMER              ((uint16_t)0x6000U)
+#define LAN8742_ENCTR_TX_TIMER_1S           ((uint16_t)0x0000U)
+#define LAN8742_ENCTR_TX_TIMER_768MS        ((uint16_t)0x2000U)
+#define LAN8742_ENCTR_TX_TIMER_512MS        ((uint16_t)0x4000U)
+#define LAN8742_ENCTR_TX_TIMER_265MS        ((uint16_t)0x6000U)
+#define LAN8742_ENCTR_RX_ENABLE             ((uint16_t)0x1000U)
+#define LAN8742_ENCTR_RX_MAX_INTERVAL       ((uint16_t)0x0C00U)
+#define LAN8742_ENCTR_RX_MAX_INTERVAL_64MS  ((uint16_t)0x0000U)
+#define LAN8742_ENCTR_RX_MAX_INTERVAL_256MS ((uint16_t)0x0400U)
+#define LAN8742_ENCTR_RX_MAX_INTERVAL_512MS ((uint16_t)0x0800U)
+#define LAN8742_ENCTR_RX_MAX_INTERVAL_1S    ((uint16_t)0x0C00U)
+#define LAN8742_ENCTR_EX_CROSS_OVER         ((uint16_t)0x0002U)
+#define LAN8742_ENCTR_EX_MANUAL_CROSS_OVER  ((uint16_t)0x0001U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_MCSR_Bit_Definition LAN8742 MCSR Bit Definition
+  * @{
+  */
+#define LAN8742_MCSR_EDPWRDOWN        ((uint16_t)0x2000U)
+#define LAN8742_MCSR_FARLOOPBACK      ((uint16_t)0x0200U)
+#define LAN8742_MCSR_ALTINT           ((uint16_t)0x0040U)
+#define LAN8742_MCSR_ENERGYON         ((uint16_t)0x0002U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_SMR_Bit_Definition LAN8742 SMR Bit Definition
+  * @{
+  */
+#define LAN8742_SMR_MODE       ((uint16_t)0x00E0U)
+#define LAN8742_SMR_PHY_ADDR   ((uint16_t)0x001FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_TPDCR_Bit_Definition LAN8742 TPDCR Bit Definition
+  * @{
+  */
+#define LAN8742_TPDCR_DELAY_IN                 ((uint16_t)0x8000U)
+#define LAN8742_TPDCR_LINE_BREAK_COUNTER       ((uint16_t)0x7000U)
+#define LAN8742_TPDCR_PATTERN_HIGH             ((uint16_t)0x0FC0U)
+#define LAN8742_TPDCR_PATTERN_LOW              ((uint16_t)0x003FU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_TCSR_Bit_Definition LAN8742 TCSR Bit Definition
+  * @{
+  */
+#define LAN8742_TCSR_TDR_ENABLE           ((uint16_t)0x8000U)
+#define LAN8742_TCSR_TDR_AD_FILTER_ENABLE ((uint16_t)0x4000U)
+#define LAN8742_TCSR_TDR_CH_CABLE_TYPE    ((uint16_t)0x0600U)
+#define LAN8742_TCSR_TDR_CH_CABLE_DEFAULT ((uint16_t)0x0000U)
+#define LAN8742_TCSR_TDR_CH_CABLE_SHORTED ((uint16_t)0x0200U)
+#define LAN8742_TCSR_TDR_CH_CABLE_OPEN    ((uint16_t)0x0400U)
+#define LAN8742_TCSR_TDR_CH_CABLE_MATCH   ((uint16_t)0x0600U)
+#define LAN8742_TCSR_TDR_CH_STATUS        ((uint16_t)0x0100U)
+#define LAN8742_TCSR_TDR_CH_LENGTH        ((uint16_t)0x00FFU)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_SCSIR_Bit_Definition LAN8742 SCSIR Bit Definition
+  * @{
+  */
+#define LAN8742_SCSIR_AUTO_MDIX_ENABLE    ((uint16_t)0x8000U)
+#define LAN8742_SCSIR_CHANNEL_SELECT      ((uint16_t)0x2000U)
+#define LAN8742_SCSIR_SQE_DISABLE         ((uint16_t)0x0800U)
+#define LAN8742_SCSIR_XPOLALITY           ((uint16_t)0x0010U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_CLR_Bit_Definition LAN8742 CLR Bit Definition
+  * @{
+  */
+#define LAN8742_CLR_CABLE_LENGTH       ((uint16_t)0xF000U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_IMR_ISFR_Bit_Definition LAN8742 IMR ISFR Bit Definition
+  * @{
+  */
+#define LAN8742_INT_8       ((uint16_t)0x0100U)
+#define LAN8742_INT_7       ((uint16_t)0x0080U)
+#define LAN8742_INT_6       ((uint16_t)0x0040U)
+#define LAN8742_INT_5       ((uint16_t)0x0020U)
+#define LAN8742_INT_4       ((uint16_t)0x0010U)
+#define LAN8742_INT_3       ((uint16_t)0x0008U)
+#define LAN8742_INT_2       ((uint16_t)0x0004U)
+#define LAN8742_INT_1       ((uint16_t)0x0002U)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_PHYSCSR_Bit_Definition LAN8742 PHYSCSR Bit Definition
+  * @{
+  */
+#define LAN8742_PHYSCSR_AUTONEGO_DONE   ((uint16_t)0x1000U)
+#define LAN8742_PHYSCSR_HCDSPEEDMASK    ((uint16_t)0x001CU)
+#define LAN8742_PHYSCSR_10BT_HD         ((uint16_t)0x0004U)
+#define LAN8742_PHYSCSR_10BT_FD         ((uint16_t)0x0014U)
+#define LAN8742_PHYSCSR_100BTX_HD       ((uint16_t)0x0008U)
+#define LAN8742_PHYSCSR_100BTX_FD       ((uint16_t)0x0018U) 
+/**
+  * @}
+  */
+    
+/** @defgroup LAN8742_Status LAN8742 Status
+  * @{
+  */    
+
+#define  LAN8742_STATUS_READ_ERROR            ((int32_t)-5)
+#define  LAN8742_STATUS_WRITE_ERROR           ((int32_t)-4)
+#define  LAN8742_STATUS_ADDRESS_ERROR         ((int32_t)-3)
+#define  LAN8742_STATUS_RESET_TIMEOUT         ((int32_t)-2)
+#define  LAN8742_STATUS_ERROR                 ((int32_t)-1)
+#define  LAN8742_STATUS_OK                    ((int32_t) 0)
+#define  LAN8742_STATUS_LINK_DOWN             ((int32_t) 1)
+#define  LAN8742_STATUS_100MBITS_FULLDUPLEX   ((int32_t) 2)
+#define  LAN8742_STATUS_100MBITS_HALFDUPLEX   ((int32_t) 3)
+#define  LAN8742_STATUS_10MBITS_FULLDUPLEX    ((int32_t) 4)
+#define  LAN8742_STATUS_10MBITS_HALFDUPLEX    ((int32_t) 5)
+#define  LAN8742_STATUS_AUTONEGO_NOTDONE      ((int32_t) 6)
+/**
+  * @}
+  */
+
+/** @defgroup LAN8742_IT_Flags LAN8742 IT Flags
+  * @{
+  */     
+#define  LAN8742_WOL_IT                        LAN8742_INT_8
+#define  LAN8742_ENERGYON_IT                   LAN8742_INT_7
+#define  LAN8742_AUTONEGO_COMPLETE_IT          LAN8742_INT_6
+#define  LAN8742_REMOTE_FAULT_IT               LAN8742_INT_5
+#define  LAN8742_LINK_DOWN_IT                  LAN8742_INT_4
+#define  LAN8742_AUTONEGO_LP_ACK_IT            LAN8742_INT_3
+#define  LAN8742_PARALLEL_DETECTION_FAULT_IT   LAN8742_INT_2
+#define  LAN8742_AUTONEGO_PAGE_RECEIVED_IT     LAN8742_INT_1
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup LAN8742_Exported_Types LAN8742 Exported Types
+  * @{
+  */
+typedef int32_t  (*lan8742_Init_Func) (void); 
+typedef int32_t  (*lan8742_DeInit_Func) (void);
+typedef int32_t  (*lan8742_ReadReg_Func)   (uint32_t, uint32_t, uint32_t *);
+typedef int32_t  (*lan8742_WriteReg_Func)  (uint32_t, uint32_t, uint32_t);
+typedef int32_t  (*lan8742_GetTick_Func)  (void);
+
+typedef struct 
+{                   
+  lan8742_Init_Func      Init; 
+  lan8742_DeInit_Func    DeInit;
+  lan8742_WriteReg_Func  WriteReg;
+  lan8742_ReadReg_Func   ReadReg; 
+  lan8742_GetTick_Func   GetTick;   
+} lan8742_IOCtx_t;  
+
+  
+typedef struct 
+{
+  uint32_t            DevAddr;
+  uint32_t            Is_Initialized;
+  lan8742_IOCtx_t     IO;
+  void               *pData;
+}lan8742_Object_t;
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LAN8742_Exported_Functions LAN8742 Exported Functions
+  * @{
+  */
+int32_t LAN8742_RegisterBusIO(lan8742_Object_t *pObj, lan8742_IOCtx_t *ioctx);
+int32_t LAN8742_Init(lan8742_Object_t *pObj);
+int32_t LAN8742_DeInit(lan8742_Object_t *pObj);
+int32_t LAN8742_DisablePowerDownMode(lan8742_Object_t *pObj);
+int32_t LAN8742_EnablePowerDownMode(lan8742_Object_t *pObj);
+int32_t LAN8742_StartAutoNego(lan8742_Object_t *pObj);
+int32_t LAN8742_GetLinkState(lan8742_Object_t *pObj);
+int32_t LAN8742_SetLinkState(lan8742_Object_t *pObj, uint32_t LinkState);
+int32_t LAN8742_EnableLoopbackMode(lan8742_Object_t *pObj);
+int32_t LAN8742_DisableLoopbackMode(lan8742_Object_t *pObj);
+int32_t LAN8742_EnableIT(lan8742_Object_t *pObj, uint32_t Interrupt);
+int32_t LAN8742_DisableIT(lan8742_Object_t *pObj, uint32_t Interrupt);
+int32_t LAN8742_ClearIT(lan8742_Object_t *pObj, uint32_t Interrupt);
+int32_t LAN8742_GetITStatus(lan8742_Object_t *pObj, uint32_t Interrupt);
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* LAN8742_H */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */       
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/CMakeLists.txt

@@ -0,0 +1,106 @@
+cmake_minimum_required(VERSION 3.13)
+
+option(STM_HAL_GENERATE_SECTIONS
+    "Generate function and data sections. Required to remove unused code" ON
+)
+
+if(STM_HAL_GENERATE_SECTIONS)
+    option(STM_HAL_REMOVE_UNUSED_CODE "Remove unused code" ON)
+endif()
+
+
+set(LIB_STM_HAL_NAME stm_hal)
+add_library(${LIB_STM_HAL_NAME})
+
+target_sources(${LIB_STM_HAL_NAME} PRIVATE
+	Src/stm32h7xx_hal_gpio.c
+	Src/stm32h7xx_hal.c
+	Src/stm32h7xx_hal_cortex.c 
+	Src/stm32h7xx_hal_tim.c 
+	Src/stm32h7xx_hal_tim_ex.c 
+	Src/stm32h7xx_hal_rcc.c 
+	Src/stm32h7xx_hal_rcc_ex.c 
+	Src/stm32h7xx_hal_flash.c 
+	Src/stm32h7xx_hal_flash_ex.c 
+	Src/stm32h7xx_hal_hsem.c 
+	Src/stm32h7xx_hal_dma.c 
+	Src/stm32h7xx_hal_dma_ex.c 
+	Src/stm32h7xx_hal_mdma.c 
+	Src/stm32h7xx_hal_pwr.c 
+	Src/stm32h7xx_hal_pwr_ex.c 
+	Src/stm32h7xx_hal_i2c.c 
+	Src/stm32h7xx_hal_i2c_ex.c 
+	Src/stm32h7xx_hal_uart.c 
+	Src/stm32h7xx_hal_uart_ex.c 
+	Src/stm32h7xx_hal_eth.c 
+	Src/stm32h7xx_hal_adc.c 
+)
+
+if(NOT STM_HAL_CONFIG_PATH)
+	message(WARNING 
+		"STM HAL library  configuration include path" 
+		"STM_HAL_CONFIG_PATH not set!"
+	)
+endif()
+
+if(IS_ABSOLUTE ${STM_HAL_CONFIG_PATH})
+	set(STM_HAL_CONFIG_PATH_ABS "${STM_HAL_CONFIG_PATH}")
+else()
+	get_filename_component(STM_HAL_CONFIG_PATH_ABS
+		${STM_HAL_CONFIG_PATH} REALPATH BASE_DIR ${CMAKE_SOURCE_DIR}
+	)
+endif()
+
+if(NOT CMSIS_INC_PATH)
+	message(WARNING "No include path for CMSIS includes specified!")
+endif()
+
+if(IS_ABSOLUTE ${CMSIS_INC_PATH})
+	set(CMSIS_INC_PATH_ABS "${STM_HAL_CONFIG_PATH}")
+else()
+	get_filename_component(CMSIS_INC_PATH_ABS
+		${CMSIS_INC_PATH} REALPATH BASE_DIR ${CMAKE_SOURCE_DIR}
+	)
+endif()
+
+if(CMAKE_VERBOSE)
+	message(STATUS "STM HAL defines: ${STM_HAL_DEFINES}")
+endif()
+
+target_compile_definitions(${LIB_STM_HAL_NAME} PRIVATE
+	${STM_HAL_DEFINES}
+)
+
+target_include_directories(${LIB_STM_HAL_NAME} PRIVATE
+	"${STM_HAL_CONFIG_PATH_ABS}"
+	"${CMSIS_INC_PATH_ABS}"
+	Inc
+)
+
+target_include_directories(${LIB_STM_HAL_NAME} INTERFACE
+	"${STM_HAL_CONFIG_PATH_ABS}"
+	"${CMSIS_INC_PATH_ABS}"
+	Inc
+)
+
+target_compile_definitions(${LIB_STM_HAL_NAME} INTERFACE
+	${STM_HAL_DEFINES}
+)
+
+if(CMAKE_C_COMPILER_ID STREQUAL "GNU")
+    if(STM_HAL_GENERATE_SECTIONS)
+        target_compile_options(${LIB_STM_HAL_NAME} PRIVATE
+            "-ffunction-sections"
+            "-fdata-sections"
+        )
+    endif()
+
+    if(STM_HAL_REMOVE_UNUSED_CODE)
+        target_link_options(${LIB_STM_HAL_NAME} PRIVATE
+            "Wl,--gc-sections"
+        )
+    endif()
+endif()
+
+
+

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32_assert_template.h

@@ -0,0 +1,57 @@
+/**
+  ******************************************************************************
+  * @file    stm32_assert.h
+  * @author  MCD Application Team
+  * @brief   STM32 assert template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32_assert.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_ASSERT_H
+#define __STM32_ASSERT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Includes ------------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32_ASSERT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cec.h

@@ -0,0 +1,794 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_cec.h
+  * @author  MCD Application Team
+  * @brief   Header file of CEC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CEC_H
+#define STM32H7xx_HAL_CEC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (CEC)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+  * @{
+  */
+
+/**
+  * @brief CEC Init Structure definition
+  */
+typedef struct
+{
+  uint32_t SignalFreeTime;               /*!< Set SFT field, specifies the Signal Free Time.
+                                              It can be one of @ref CEC_Signal_Free_Time
+                                              and belongs to the set {0,...,7} where
+                                              0x0 is the default configuration
+                                              else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+  uint32_t Tolerance;                    /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+                                              it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+                                              or CEC_EXTENDED_TOLERANCE */
+
+  uint32_t BRERxStop;                    /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+                                              CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+                                              CEC_RX_STOP_ON_BRE:    reception is stopped. */
+
+  uint32_t BREErrorBitGen;               /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Bit Rising Error detection.
+                                              CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+                                              CEC_BRE_ERRORBIT_GENERATION:    error-bit generation if BRESTP is set. */
+
+  uint32_t LBPEErrorBitGen;              /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Long Bit Period Error detection.
+                                              CEC_LBPE_ERRORBIT_NO_GENERATION:  no error-bit generation.
+                                              CEC_LBPE_ERRORBIT_GENERATION:     error-bit generation. */
+
+  uint32_t BroadcastMsgNoErrorBitGen;    /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+                                              upon an error detected on a broadcast message.
+
+                                              It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+                                              1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+                                                 a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+                                                    and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+                                                 b) LBPE detection: error-bit generation on the CEC line
+                                                    if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+                                              2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+                                                 no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+                                                 there is no error-bit generation in case of Short Bit Period Error detection in
+                                                 a broadcast message while LSTN bit is set. */
+
+  uint32_t SignalFreeTimeOption;         /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+                                              CEC_SFT_START_ON_TXSOM SFT:    timer starts when TXSOM is set by software.
+                                              CEC_SFT_START_ON_TX_RX_END:  SFT timer starts automatically at the end of message transmission/reception. */
+
+  uint32_t ListenMode;                   /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+                                              CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+                                                own address (OAR). Messages addressed to different destination are ignored.
+                                                Broadcast messages are always received.
+
+                                              CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+                                                address (OAR) with positive acknowledge. Messages addressed to different destination
+                                                are received, but without interfering with the CEC bus: no acknowledge sent.  */
+
+  uint16_t  OwnAddress;                 /*!< Own addresses configuration
+                                             This parameter can be a value of @ref CEC_OWN_ADDRESS */
+
+  uint8_t  *RxBuffer;                    /*!< CEC Rx buffer pointeur */
+
+
+} CEC_InitTypeDef;
+
+/**
+  * @brief HAL CEC State definition
+  * @note  HAL CEC State value is a combination of 2 different substates: gState and RxState (see @ref CEC_State_Definition).
+  *        - gState contains CEC state information related to global Handle management
+  *          and also information related to Tx operations.
+  *          gState value coding follow below described bitmap :
+  *          b7 (not used)
+  *             x  : Should be set to 0
+  *          b6  Error information
+  *             0  : No Error
+  *             1  : Error
+  *          b5     IP initilisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized. HAL CEC Init function already called)
+  *          b4-b3  (not used)
+  *             xx : Should be set to 00
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (IP busy with some configuration or internal operations)
+  *          b1     (not used)
+  *             x  : Should be set to 0
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  *        - RxState contains information related to Rx operations.
+  *          RxState value coding follow below described bitmap :
+  *          b7-b6  (not used)
+  *             xx : Should be set to 00
+  *          b5     IP initilisation status
+  *             0  : Reset (IP not initialized)
+  *             1  : Init done (IP initialized)
+  *          b4-b2  (not used)
+  *            xxx : Should be set to 000
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     (not used)
+  *             x  : Should be set to 0.
+  */
+typedef uint32_t HAL_CEC_StateTypeDef;
+
+/**
+  * @brief  CEC handle Structure definition
+  */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+typedef struct __CEC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+{
+  CEC_TypeDef             *Instance;      /*!< CEC registers base address */
+
+  CEC_InitTypeDef         Init;           /*!< CEC communication parameters */
+
+  uint8_t                 *pTxBuffPtr;    /*!< Pointer to CEC Tx transfer Buffer */
+
+  uint16_t                TxXferCount;    /*!< CEC Tx Transfer Counter */
+
+  uint16_t                RxXferSize;     /*!< CEC Rx Transfer size, 0: header received only */
+
+  HAL_LockTypeDef         Lock;           /*!< Locking object */
+
+  HAL_CEC_StateTypeDef    gState;         /*!< CEC state information related to global Handle management
+                                               and also related to Tx operations.
+                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+  HAL_CEC_StateTypeDef    RxState;        /*!< CEC state information related to Rx operations.
+                                               This parameter can be a value of @ref HAL_CEC_StateTypeDef */
+
+  uint32_t                ErrorCode;      /*!< For errors handling purposes, copy of ISR register
+                                               in case error is reported */
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+  void (* TxCpltCallback)(struct __CEC_HandleTypeDef
+                          *hcec);                                /*!< CEC Tx Transfer completed callback */
+  void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec,
+                          uint32_t RxFrameSize);          /*!< CEC Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec);                                 /*!< CEC error callback */
+
+  void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec);               /*!< CEC Msp Init callback              */
+  void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec);             /*!< CEC Msp DeInit callback            */
+
+#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
+} CEC_HandleTypeDef;
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL CEC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_CEC_TX_CPLT_CB_ID      = 0x00U,    /*!< CEC Tx Transfer completed callback ID  */
+  HAL_CEC_RX_CPLT_CB_ID      = 0x01U,    /*!< CEC Rx Transfer completed callback ID  */
+  HAL_CEC_ERROR_CB_ID        = 0x02U,    /*!< CEC error callback ID                 */
+  HAL_CEC_MSPINIT_CB_ID      = 0x03U,    /*!< CEC Msp Init callback ID               */
+  HAL_CEC_MSPDEINIT_CB_ID    = 0x04U     /*!< CEC Msp DeInit callback ID             */
+} HAL_CEC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL CEC Callback pointer definition
+  */
+typedef  void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec);  /*!< pointer to an CEC callback function */
+typedef  void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec,
+                                        uint32_t RxFrameSize);  /*!< pointer to an Rx Transfer completed callback function */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+  * @{
+  */
+/** @defgroup CEC_State_Definition CEC State Code Definition
+  * @{
+  */
+#define   HAL_CEC_STATE_RESET      ((uint32_t)0x00000000)   /*!< Peripheral is not yet Initialized
+                                                                 Value is allowed for gState and RxState  */
+#define   HAL_CEC_STATE_READY      ((uint32_t)0x00000020)   /*!< Peripheral Initialized and ready for use
+                                                                 Value is allowed for gState and RxState  */
+#define   HAL_CEC_STATE_BUSY       ((uint32_t)0x00000024)   /*!< an internal process is ongoing
+                                                                 Value is allowed for gState only         */
+#define   HAL_CEC_STATE_BUSY_RX    ((uint32_t)0x00000022)   /*!< Data Reception process is ongoing
+                                                                 Value is allowed for RxState only        */
+#define   HAL_CEC_STATE_BUSY_TX    ((uint32_t)0x00000021)   /*!< Data Transmission process is ongoing
+                                                                 Value is allowed for gState only         */
+#define   HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023)   /*!< an internal process is ongoing
+                                                                 Value is allowed for gState only         */
+#define   HAL_CEC_STATE_ERROR      ((uint32_t)0x00000050)   /*!< Error Value is allowed for gState only   */
+/**
+  * @}
+  */
+/** @defgroup CEC_Error_Code CEC Error Code
+  * @{
+  */
+#define HAL_CEC_ERROR_NONE    (uint32_t) 0x0000U     /*!< no error                      */
+#define HAL_CEC_ERROR_RXOVR   CEC_ISR_RXOVR          /*!< CEC Rx-Overrun                */
+#define HAL_CEC_ERROR_BRE     CEC_ISR_BRE            /*!< CEC Rx Bit Rising Error       */
+#define HAL_CEC_ERROR_SBPE    CEC_ISR_SBPE           /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE    CEC_ISR_LBPE           /*!< CEC Rx Long Bit period Error  */
+#define HAL_CEC_ERROR_RXACKE  CEC_ISR_RXACKE         /*!< CEC Rx Missing Acknowledge    */
+#define HAL_CEC_ERROR_ARBLST  CEC_ISR_ARBLST         /*!< CEC Arbitration Lost          */
+#define HAL_CEC_ERROR_TXUDR   CEC_ISR_TXUDR          /*!< CEC Tx-Buffer Underrun        */
+#define HAL_CEC_ERROR_TXERR   CEC_ISR_TXERR          /*!< CEC Tx-Error                  */
+#define HAL_CEC_ERROR_TXACKE  CEC_ISR_TXACKE         /*!< CEC Tx Missing Acknowledge    */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define  HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error  */
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Signal_Free_Time  CEC Signal Free Time setting parameter
+  * @{
+  */
+#define CEC_DEFAULT_SFT                    ((uint32_t)0x00000000U)
+#define CEC_0_5_BITPERIOD_SFT              ((uint32_t)0x00000001U)
+#define CEC_1_5_BITPERIOD_SFT              ((uint32_t)0x00000002U)
+#define CEC_2_5_BITPERIOD_SFT              ((uint32_t)0x00000003U)
+#define CEC_3_5_BITPERIOD_SFT              ((uint32_t)0x00000004U)
+#define CEC_4_5_BITPERIOD_SFT              ((uint32_t)0x00000005U)
+#define CEC_5_5_BITPERIOD_SFT              ((uint32_t)0x00000006U)
+#define CEC_6_5_BITPERIOD_SFT              ((uint32_t)0x00000007U)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+  * @{
+  */
+#define CEC_STANDARD_TOLERANCE             ((uint32_t)0x00000000U)
+#define CEC_EXTENDED_TOLERANCE             ((uint32_t)CEC_CFGR_RXTOL)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+  * @{
+  */
+#define CEC_NO_RX_STOP_ON_BRE             ((uint32_t)0x00000000U)
+#define CEC_RX_STOP_ON_BRE                ((uint32_t)CEC_CFGR_BRESTP)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BREErrorBitGen  CEC Error Bit Generation if Bit Rise Error reported
+  * @{
+  */
+#define CEC_BRE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000U)
+#define CEC_BRE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_BREGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_LBPEErrorBitGen  CEC Error Bit Generation if Long Bit Period Error reported
+  * @{
+  */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000U)
+#define CEC_LBPE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen  CEC Error Bit Generation on Broadcast message
+  * @{
+  */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION     ((uint32_t)0x00000000U)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION  ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_SFT_Option     CEC Signal Free Time start option
+  * @{
+  */
+#define CEC_SFT_START_ON_TXSOM           ((uint32_t)0x00000000U)
+#define CEC_SFT_START_ON_TX_RX_END       ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Listening_Mode    CEC Listening mode option
+  * @{
+  */
+#define CEC_REDUCED_LISTENING_MODE          ((uint32_t)0x00000000U)
+#define CEC_FULL_LISTENING_MODE             ((uint32_t)CEC_CFGR_LSTN)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_OAR_Position   CEC Device Own Address position in CEC CFGR register
+  * @{
+  */
+#define CEC_CFGR_OAR_LSB_POS            ((uint32_t) 16U)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Initiator_Position   CEC Initiator logical address position in message header
+  * @{
+  */
+#define CEC_INITIATOR_LSB_POS           ((uint32_t) 4U)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_OWN_ADDRESS   CEC Own Address
+  * @{
+  */
+#define CEC_OWN_ADDRESS_NONE           ((uint16_t) 0x0000U)   /* Reset value */
+#define CEC_OWN_ADDRESS_0              ((uint16_t) 0x0001U)   /* Logical Address 0 */
+#define CEC_OWN_ADDRESS_1              ((uint16_t) 0x0002U)   /* Logical Address 1 */
+#define CEC_OWN_ADDRESS_2              ((uint16_t) 0x0004U)   /* Logical Address 2 */
+#define CEC_OWN_ADDRESS_3              ((uint16_t) 0x0008U)   /* Logical Address 3 */
+#define CEC_OWN_ADDRESS_4              ((uint16_t) 0x0010U)   /* Logical Address 4 */
+#define CEC_OWN_ADDRESS_5              ((uint16_t) 0x0020U)   /* Logical Address 5 */
+#define CEC_OWN_ADDRESS_6              ((uint16_t) 0x0040U)   /* Logical Address 6 */
+#define CEC_OWN_ADDRESS_7              ((uint16_t) 0x0080U)   /* Logical Address 7 */
+#define CEC_OWN_ADDRESS_8              ((uint16_t) 0x0100U)   /* Logical Address 9 */
+#define CEC_OWN_ADDRESS_9              ((uint16_t) 0x0200U)   /* Logical Address 10 */
+#define CEC_OWN_ADDRESS_10             ((uint16_t) 0x0400U)   /* Logical Address 11 */
+#define CEC_OWN_ADDRESS_11             ((uint16_t) 0x0800U)   /* Logical Address 12 */
+#define CEC_OWN_ADDRESS_12             ((uint16_t) 0x1000U)   /* Logical Address 13 */
+#define CEC_OWN_ADDRESS_13             ((uint16_t) 0x2000U)   /* Logical Address 14 */
+#define CEC_OWN_ADDRESS_14             ((uint16_t) 0x4000U)   /* Logical Address 15 */
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Interrupts_Definitions  CEC Interrupts definition
+  * @{
+  */
+#define CEC_IT_TXACKE                   CEC_IER_TXACKEIE
+#define CEC_IT_TXERR                    CEC_IER_TXERRIE
+#define CEC_IT_TXUDR                    CEC_IER_TXUDRIE
+#define CEC_IT_TXEND                    CEC_IER_TXENDIE
+#define CEC_IT_TXBR                     CEC_IER_TXBRIE
+#define CEC_IT_ARBLST                   CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE                   CEC_IER_RXACKEIE
+#define CEC_IT_LBPE                     CEC_IER_LBPEIE
+#define CEC_IT_SBPE                     CEC_IER_SBPEIE
+#define CEC_IT_BRE                      CEC_IER_BREIE
+#define CEC_IT_RXOVR                    CEC_IER_RXOVRIE
+#define CEC_IT_RXEND                    CEC_IER_RXENDIE
+#define CEC_IT_RXBR                     CEC_IER_RXBRIE
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Flags_Definitions  CEC Flags definition
+  * @{
+  */
+#define CEC_FLAG_TXACKE                 CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR                  CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR                  CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND                  CEC_ISR_TXEND
+#define CEC_FLAG_TXBR                   CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST                 CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE                 CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE                   CEC_ISR_LBPE
+#define CEC_FLAG_SBPE                   CEC_ISR_SBPE
+#define CEC_FLAG_BRE                    CEC_ISR_BRE
+#define CEC_FLAG_RXOVR                  CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND                  CEC_ISR_RXEND
+#define CEC_FLAG_RXBR                   CEC_ISR_RXBR
+/**
+  * @}
+  */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+  * @{
+  */
+#define CEC_ISR_ALL_ERROR              ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+                                        CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+  * @{
+  */
+#define CEC_IER_RX_ALL_ERR              ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
+  * @{
+  */
+#define CEC_IER_TX_ALL_ERR              ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CEC handle gstate & RxState
+  * @param  __HANDLE__ CEC handle.
+  * @retval None
+  */
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
+                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
+                                                       (__HANDLE__)->MspInitCallback = NULL;           \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;         \
+                                                     } while(0)
+#else
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_CEC_STATE_RESET;     \
+                                                       (__HANDLE__)->RxState = HAL_CEC_STATE_RESET;    \
+                                                     } while(0)
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/** @brief  Checks whether or not the specified CEC interrupt flag is set.
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rising Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received.
+  * @retval ITStatus
+  */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/** @brief  Clears the interrupt or status flag when raised (write at 1)
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __FLAG__ specifies the interrupt/status flag to clear.
+  *        This parameter can be one of the following values:
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rising Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received.
+  * @retval none
+  */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR |= (__FLAG__))
+
+/** @brief  Enables the specified CEC interrupt.
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __INTERRUPT__ specifies the CEC interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief  Disables the specified CEC interrupt.
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __INTERRUPT__ specifies the CEC interrupt to disable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval none
+  */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief  Checks whether or not the specified CEC interrupt is enabled.
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __INTERRUPT__ specifies the CEC interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief  Enables the CEC device
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR |=  CEC_CR_CECEN)
+
+/** @brief  Disables the CEC device
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR &=  ~CEC_CR_CECEN)
+
+/** @brief  Set Transmission Start flag
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__)        ((__HANDLE__)->Instance->CR |=  CEC_CR_TXSOM)
+
+/** @brief  Set Transmission End flag
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval none
+  * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+  */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__)         ((__HANDLE__)->Instance->CR |=  CEC_CR_TXEOM)
+
+/** @brief  Get Transmission Start flag
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief  Get Transmission End flag
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval FlagStatus
+  */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__)   ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief  Clear OAR register
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @retval none
+  */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__)   CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief  Set OAR register (without resetting previously set address in case of multi-address mode)
+  *          To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+  * @param  __HANDLE__ specifies the CEC Handle.
+  * @param  __ADDRESS__ Own Address value (CEC logical address is identified by bit position)
+  * @retval none
+  */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__)   SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+
+#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID,
+                                           pCEC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
+#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress,
+                                      uint8_t *pData, uint32_t Size);
+uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+  * @{
+  */
+
+#define IS_CEC_SIGNALFREETIME(__SFT__)     ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__)        (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+                                            ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__)   (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+                                           ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+                                                ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+                                                 ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+                                                                       ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__)          (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+                                          ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__)     (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+                                             ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC message size.
+  *       The message size is the payload size: without counting the header,
+  *       it varies from 0 byte (ping operation, one header only, no payload) to
+  *       15 bytes (1 opcode and up to 14 operands following the header).
+  * @param  __SIZE__ CEC message size.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+  *        OAR address is written in a 15-bit field within CEC_CFGR register.
+  * @param  __ADDRESS__ CEC own address.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU)
+
+/** @brief Check CEC initiator or destination logical address setting.
+  *        Initiator and destination addresses are coded over 4 bits.
+  * @param  __ADDRESS__ CEC initiator or logical address.
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU)
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* CEC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xxHAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_comp.h

@@ -0,0 +1,954 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_comp.h
+  * @author  MCD Application Team
+  * @brief   Header file of COMP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_COMP_H
+#define STM32H7xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup COMP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup COMP_Exported_Types COMP Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  COMP Init structure definition  
+  */
+typedef struct
+{
+
+  uint32_t WindowMode;         /*!< Set window mode of a pair of comparators instances
+                                    (2 consecutive instances odd and even COMP<x> and COMP<x+1>).
+                                    Note: HAL COMP driver allows to set window mode from any COMP instance of the pair of COMP instances composing window mode.
+                                    This parameter can be a value of @ref COMP_WindowMode */
+
+  uint32_t Mode;               /*!< Set comparator operating mode to adjust power and speed.
+                                    Note: For the characteritics of comparator power modes
+                                          (propagation delay and power consumption), refer to device datasheet.
+                                    This parameter can be a value of @ref COMP_PowerMode */
+
+  uint32_t NonInvertingInput;  /*!< Set comparator input plus (non-inverting input).
+                                    This parameter can be a value of @ref COMP_InputPlus */
+
+  uint32_t InvertingInput;     /*!< Set comparator input minus (inverting input).
+                                    This parameter can be a value of @ref COMP_InputMinus */
+
+  uint32_t Hysteresis;         /*!< Set comparator hysteresis mode of the input minus.
+                                    This parameter can be a value of @ref COMP_Hysteresis */
+
+  uint32_t OutputPol;          /*!< Set comparator output polarity.
+                                    This parameter can be a value of @ref COMP_OutputPolarity */
+
+  uint32_t BlankingSrce;       /*!< Set comparator blanking source.
+                                    This parameter can be a value of @ref COMP_BlankingSrce */
+
+  uint32_t TriggerMode;        /*!< Set the comparator output triggering External Interrupt Line (EXTI).
+                                    This parameter can be a value of @ref COMP_EXTI_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+  * @brief  HAL COMP state machine: HAL COMP states definition
+  */
+#define COMP_STATE_BITFIELD_LOCK  ((uint32_t)0x10)
+typedef enum
+{
+  HAL_COMP_STATE_RESET             = 0x00,                                              /*!< COMP not yet initialized                             */
+  HAL_COMP_STATE_RESET_LOCKED      = (HAL_COMP_STATE_RESET | COMP_STATE_BITFIELD_LOCK), /*!< COMP not yet initialized and configuration is locked */
+  HAL_COMP_STATE_READY             = 0x01,                                              /*!< COMP initialized and ready for use                   */
+  HAL_COMP_STATE_READY_LOCKED      = (HAL_COMP_STATE_READY | COMP_STATE_BITFIELD_LOCK), /*!< COMP initialized but configuration is locked         */
+  HAL_COMP_STATE_BUSY              = 0x02,                                              /*!< COMP is running                                      */
+  HAL_COMP_STATE_BUSY_LOCKED       = (HAL_COMP_STATE_BUSY | COMP_STATE_BITFIELD_LOCK)   /*!< COMP is running and configuration is locked          */
+}HAL_COMP_StateTypeDef;
+
+/** 
+  * @brief  COMP Handle Structure definition
+  */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+typedef struct __COMP_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+{
+  COMP_TypeDef       *Instance;       /*!< Register base address    */
+  COMP_InitTypeDef   Init;            /*!< COMP required parameters */
+  HAL_LockTypeDef    Lock;            /*!< Locking object           */
+  __IO HAL_COMP_StateTypeDef  State;  /*!< COMP communication state */
+  __IO uint32_t      ErrorCode;       /*!< COMP error code */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+  void (* TriggerCallback)(struct __COMP_HandleTypeDef *hcomp);   /*!< COMP trigger callback */
+  void (* MspInitCallback)(struct __COMP_HandleTypeDef *hcomp);   /*!< COMP Msp Init callback */
+  void (* MspDeInitCallback)(struct __COMP_HandleTypeDef *hcomp); /*!< COMP Msp DeInit callback */
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+
+} COMP_HandleTypeDef;
+
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL COMP Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_COMP_TRIGGER_CB_ID                = 0x00U,  /*!< COMP trigger callback ID */
+  HAL_COMP_MSPINIT_CB_ID                = 0x01U,  /*!< COMP Msp Init callback ID */
+  HAL_COMP_MSPDEINIT_CB_ID              = 0x02U   /*!< COMP Msp DeInit callback ID */
+} HAL_COMP_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL COMP Callback pointer definition
+  */
+typedef  void (*pCOMP_CallbackTypeDef)(COMP_HandleTypeDef *hcomp); /*!< pointer to a COMP callback function */
+
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+  * @{
+  */
+  
+/** @defgroup COMP_Error_Code COMP Error Code
+  * @{
+  */
+#define HAL_COMP_ERROR_NONE             (0x00U)   /*!< No error */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+#define HAL_COMP_ERROR_INVALID_CALLBACK (0x01U)   /*!< Invalid Callback error */
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+  
+/** @defgroup COMP_WindowMode COMP Window Mode
+  * @{
+  */
+#define COMP_WINDOWMODE_DISABLE                 ((uint32_t)0x00000000)   /*!< Window mode disable: Comparators instances pair COMP1 and COMP2 are independent */
+#define COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CFGRx_WINMODE)     /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
+
+/**
+  * @}
+  */
+
+/** @defgroup COMP_PowerMode COMP power mode
+  * @{
+  */
+/* Note: For the characteritics of comparator power modes                     */
+/*       (propagation delay and power consumption),                           */
+/*       refer to device datasheet.                                           */
+#define COMP_POWERMODE_HIGHSPEED       ((uint32_t)0x00000000)   /*!< High Speed */
+#define COMP_POWERMODE_MEDIUMSPEED     (COMP_CFGRx_PWRMODE_0)   /*!< Medium Speed */
+#define COMP_POWERMODE_ULTRALOWPOWER   (COMP_CFGRx_PWRMODE)     /*!< Ultra-low power mode */
+/**
+  * @}
+  */
+
+/** @defgroup COMP_InputPlus COMP input plus (non-inverting input)
+  * @{
+  */
+#define COMP_INPUT_PLUS_IO1            ((uint32_t)0x00000000) /*!< Comparator input plus connected to IO1 (pin PB0 for COMP1, pin PE9 for COMP2) */
+#define COMP_INPUT_PLUS_IO2            (COMP_CFGRx_INPSEL)    /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PE11 for COMP2) */
+#if defined (COMP_CFGRx_INP2SEL)
+#define COMP_INPUT_PLUS_DAC2_CH1       (COMP_CFGRx_INP2SEL)   /*!< Comparator input plus 2 connected to (DAC2_CH1 for COMP1) */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup COMP_InputMinus COMP input minus (inverting input)
+  * @{
+  */
+#define COMP_INPUT_MINUS_1_4VREFINT     (                                                                                        COMP_CFGRx_SCALEN | COMP_CFGRx_BRGEN)    /*!< Comparator input minus connected to 1/4 VrefInt */
+#define COMP_INPUT_MINUS_1_2VREFINT     (                                                                  COMP_CFGRx_INMSEL_0 | COMP_CFGRx_SCALEN | COMP_CFGRx_BRGEN)    /*!< Comparator input minus connected to 1/2 VrefInt */
+#define COMP_INPUT_MINUS_3_4VREFINT     (                                            COMP_CFGRx_INMSEL_1                       | COMP_CFGRx_SCALEN | COMP_CFGRx_BRGEN)    /*!< Comparator input minus connected to 3/4 VrefInt */
+#define COMP_INPUT_MINUS_VREFINT        (                                            COMP_CFGRx_INMSEL_1 | COMP_CFGRx_INMSEL_0 | COMP_CFGRx_SCALEN                   )    /*!< Comparator input minus connected to VrefInt */
+#define COMP_INPUT_MINUS_DAC1_CH1       (                      COMP_CFGRx_INMSEL_2                                                                                   )    /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */
+#define COMP_INPUT_MINUS_DAC1_CH2       (                      COMP_CFGRx_INMSEL_2                       | COMP_CFGRx_INMSEL_0                                       )    /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */
+#define COMP_INPUT_MINUS_IO1            (                      COMP_CFGRx_INMSEL_2 | COMP_CFGRx_INMSEL_1                                                             )    /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PE10 for COMP2) */
+#define COMP_INPUT_MINUS_IO2            (                      COMP_CFGRx_INMSEL_2 | COMP_CFGRx_INMSEL_1 | COMP_CFGRx_INMSEL_0                                       )    /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PE7 for COMP2) */
+#if defined (COMP_CFGRx_INMSEL_3)
+#define COMP_INPUT_MINUS_TPSENS_DAC2CH1 (COMP_CFGRx_INMSEL_3                                                                                                         )    /*!< Comparator input minus connected to (temp sensor which is exist in ADC for COMP1, DAC2_CH1 for COMP2) */
+#define COMP_INPUT_MINUS_VBAT_VDDAP     (COMP_CFGRx_INMSEL_3                                             | COMP_CFGRx_INMSEL_0                                       )    /*!< Comparator input minus connected to (VBAT/4 for COMP1, VDDAP for COMP2) */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup COMP_Hysteresis COMP hysteresis
+  * @{
+  */
+#define COMP_HYSTERESIS_NONE           ((uint32_t)0x00000000)   /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW            (COMP_CFGRx_HYST_0)      /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM         (COMP_CFGRx_HYST_1)      /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH           (COMP_CFGRx_HYST)        /*!< Hysteresis level high */
+/**
+  * @}
+  */
+
+/** @defgroup COMP_OutputPolarity COMP Output Polarity
+  * @{
+  */
+#define COMP_OUTPUTPOL_NONINVERTED     ((uint32_t)0x00000000)  /*!< COMP output level is not inverted (comparator output is high when the input plus is at a higher voltage than the input minus) */
+#define COMP_OUTPUTPOL_INVERTED        (COMP_CFGRx_POLARITY)   /*!< COMP output level is inverted     (comparator output is low  when the input plus is at a higher voltage than the input minus) */
+/**
+  * @}
+  */
+
+
+/** @defgroup COMP_BlankingSrce  COMP Blanking Source
+  * @{
+  */
+/* Any blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRC_NONE             ((uint32_t)0x00000000)                           /*!< No blanking source */
+#define COMP_BLANKINGSRC_TIM1_OC5         (COMP_CFGRx_BLANKING_0)                          /*!< TIM1 OC5 selected as blanking source for comparator */
+#define COMP_BLANKINGSRC_TIM2_OC3         (COMP_CFGRx_BLANKING_1)                          /*!< TIM2 OC3 selected as blanking source for comparator */
+#define COMP_BLANKINGSRC_TIM3_OC3         (COMP_CFGRx_BLANKING_0 |COMP_CFGRx_BLANKING_1)   /*!< TIM3 OC3 selected as blanking source for compartor */
+#define COMP_BLANKINGSRC_TIM3_OC4         (COMP_CFGRx_BLANKING_2)                          /*!< TIM3 OC4 selected as blanking source for comparator */
+#define COMP_BLANKINGSRC_TIM8_OC5         (COMP_CFGRx_BLANKING_2|COMP_CFGRx_BLANKING_0)    /*!< TIM8 OC5 selected as blanking source for comparator */
+#define COMP_BLANKINGSRC_TIM15_OC1        (COMP_CFGRx_BLANKING_2|COMP_CFGRx_BLANKING_1)    /*!< TIM15 OC1 selected as blanking source for comparator */
+/**
+  * @}
+  */
+
+
+
+
+/** @defgroup COMP_OutputLevel COMP Output Level
+  * @{
+  */ 
+
+/* Note: Comparator output level values are fixed to "0" and "1",             */
+/* corresponding COMP register bit is managed by HAL function to match        */
+/* with these values (independently of bit position in register).             */
+
+/* When output polarity is not inverted, comparator output is low when
+   the input plus is at a lower voltage than the input minus */
+#define COMP_OUTPUT_LEVEL_LOW              ((uint32_t)0x00000000)
+/* When output polarity is not inverted, comparator output is high when
+   the input plus is at a higher voltage than the input minus */
+#define COMP_OUTPUT_LEVEL_HIGH             ((uint32_t)0x00000001)
+
+/**
+  * @}
+  */
+
+/** @defgroup COMP_EXTI_TriggerMode COMP output to EXTI
+  * @{
+  */
+#define COMP_TRIGGERMODE_NONE                 ((uint32_t)0x00000000)                                    /*!< Comparator output triggering no External Interrupt Line */
+#define COMP_TRIGGERMODE_IT_RISING            (COMP_EXTI_IT | COMP_EXTI_RISING)                         /*!< Comparator output triggering External Interrupt Line event with interruption, on rising edge */
+#define COMP_TRIGGERMODE_IT_FALLING           (COMP_EXTI_IT | COMP_EXTI_FALLING)                        /*!< Comparator output triggering External Interrupt Line event with interruption, on falling edge */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING    (COMP_EXTI_IT | COMP_EXTI_RISING | COMP_EXTI_FALLING)     /*!< Comparator output triggering External Interrupt Line event with interruption, on both rising and falling edges */
+#define COMP_TRIGGERMODE_EVENT_RISING         (COMP_EXTI_EVENT | COMP_EXTI_RISING)                      /*!< Comparator output triggering External Interrupt Line event only (without interruption), on rising edge */
+#define COMP_TRIGGERMODE_EVENT_FALLING        (COMP_EXTI_EVENT | COMP_EXTI_FALLING)                     /*!< Comparator output triggering External Interrupt Line event only (without interruption), on falling edge */
+#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (COMP_EXTI_EVENT | COMP_EXTI_RISING | COMP_EXTI_FALLING)  /*!< Comparator output triggering External Interrupt Line event only (without interruption), on both rising and falling edges */
+
+/**
+  * @}
+  */
+
+/** @defgroup COMP_Flag COMP Flag
+  * @{
+  */
+#define COMP_FLAG_C1I           COMP_SR_C1IF           /*!< Comparator 1 Interrupt Flag */
+#define COMP_FLAG_C2I           COMP_SR_C2IF           /*!< Comparator 2 Interrupt Flag */
+#define COMP_FLAG_LOCK          COMP_CFGRx_LOCK        /*!< Lock flag */
+/**
+  * @}
+  */
+/** @defgroup COMP_IT_CLEAR_Flags  COMP Interruption Clear Flags
+  * @{
+  */
+#define COMP_CLEAR_C1IF          COMP_ICFR_C1IF     /*!< Clear Comparator 1 Interrupt Flag */
+#define COMP_CLEAR_C2IF          COMP_ICFR_C2IF     /*!< Clear Comparator 2 Interrupt Flag */
+/**
+  * @}
+  */
+/** @defgroup COMP_Interrupts_Definitions COMP Interrupts Definitions
+  * @{
+  */
+#define COMP_IT_EN               COMP_CFGRx_ITEN 
+
+/**
+  * @}
+  */
+  
+
+/**
+  * @}
+  */
+ 
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+  * @{
+  */
+/** @defgroup COMP_Handle_Management  COMP Handle Management
+ * @{
+  */
+
+/** @brief  Reset COMP handle state.
+  * @param  __HANDLE__  COMP handle
+  * @retval None
+  */
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) do{                                                 \
+                                                     (__HANDLE__)->State = HAL_COMP_STATE_RESET;      \
+                                                     (__HANDLE__)->MspInitCallback = NULL;            \
+                                                     (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                    } while(0)
+#else
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+#endif
+
+/**
+  * @brief Clear COMP error code (set it to no error code "HAL_COMP_ERROR_NONE").
+  * @param __HANDLE__ COMP handle
+  * @retval None
+  */
+#define COMP_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_COMP_ERROR_NONE) 
+
+/**
+  * @brief  Enable the specified comparator.
+  * @param  __HANDLE__ COMP handle
+  * @retval None
+  */
+#define __HAL_COMP_ENABLE(__HANDLE__)                 SET_BIT((__HANDLE__)->Instance->CFGR, COMP_CFGRx_EN)
+
+/**
+  * @brief  Disable the specified comparator.
+  * @param  __HANDLE__ COMP handle
+  * @retval None
+  */
+#define __HAL_COMP_DISABLE(__HANDLE__)                CLEAR_BIT((__HANDLE__)->Instance->CFGR, COMP_CFGRx_EN)
+
+/**
+  * @brief  Lock the specified comparator configuration.
+  * @note   Using this macro induce HAL COMP handle state machine being no
+  *         more in line with COMP instance state.
+  *         To keep HAL COMP handle state machine updated, it is recommended
+  *         to use function "HAL_COMP_Lock')".
+  * @param  __HANDLE__ COMP handle
+  * @retval None
+  */
+#define __HAL_COMP_LOCK(__HANDLE__)                   SET_BIT((__HANDLE__)->Instance->CFGR, COMP_CFGRx_LOCK)
+
+/**
+  * @brief  Check whether the specified comparator is locked.
+  * @param  __HANDLE__  COMP handle
+  * @retval Value 0 if COMP instance is not locked, value 1 if COMP instance is locked
+  */
+#define __HAL_COMP_IS_LOCKED(__HANDLE__)           (READ_BIT((__HANDLE__)->Instance->CFGR, COMP_CFGRx_LOCK) == COMP_CFGRx_LOCK)
+
+/**
+  * @}
+  */
+  
+/** @defgroup COMP_Exti_Management  COMP external interrupt line management
+  * @{
+  */
+
+/**
+  * @brief  Enable the COMP1 EXTI line rising edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE()    SET_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP1)
+
+
+/**
+  * @brief  Disable the COMP1 EXTI line rising edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE()    CLEAR_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Enable the COMP1 EXTI line falling edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE()    SET_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 EXTI line falling edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE()    CLEAR_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP1)
+
+
+/**
+  * @brief  Enable the COMP1 EXTI line rising & falling edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE()   do {                                           \
+                                                               __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE();  \
+                                                               __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \
+                                                             } while(0)
+
+
+/**
+  * @brief  Disable the COMP1 EXTI line rising & falling edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE()  do {                                            \
+                                                               __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE();  \
+                                                               __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \
+                                                             } while(0)
+
+
+/**
+  * @brief  Enable the COMP1 EXTI line in interrupt mode.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTI_ENABLE_IT()             SET_BIT(EXTI_D1->IMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 EXTI line in interrupt mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_IT()            CLEAR_BIT(EXTI_D1->IMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Enable the COMP1 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT()           SET_BIT(EXTI_D1->EMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT()          CLEAR_BIT(EXTI_D1->EMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Check whether the COMP1 EXTI line flag is set or not.
+  * @retval RESET or SET
+  */
+#define __HAL_COMP_COMP1_EXTI_GET_FLAG()              READ_BIT(EXTI_D1->PR1, COMP_EXTI_LINE_COMP1)
+/**
+  * @brief  Clear the COMP1 EXTI flag.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG()            WRITE_REG(EXTI_D1->PR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Generate a software interrupt on the COMP1 EXTI line.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT()         SET_BIT(EXTI->SWIER1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Enable the COMP1 D3 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID3_ENABLE_EVENT()        SET_BIT(EXTI->D3PMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 D3 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID3_DISABLE_EVENT()        CLEAR_BIT(EXTI->D3PMR1, COMP_EXTI_LINE_COMP1)
+
+#if defined(DUAL_CORE)
+/**
+  * @brief  Enable the COMP1 D2 EXTI line in interrupt mode.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP1_EXTID2_ENABLE_IT()           SET_BIT(EXTI_D2->IMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 D2 EXTI line in interrupt mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID2_DISABLE_IT()          CLEAR_BIT(EXTI_D2->IMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Enable the COMP1 D2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID2_ENABLE_EVENT()         SET_BIT(EXTI_D2->EMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Disable the COMP1 D2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID2_DISABLE_EVENT()        CLEAR_BIT(EXTI_D2->EMR1, COMP_EXTI_LINE_COMP1)
+
+/**
+  * @brief  Check whether the COMP1 D2 EXTI line flag is set or not.
+  * @retval RESET or SET
+  */
+#define __HAL_COMP_COMP1_EXTID2_GET_FLAG()              READ_BIT(EXTI_D2->PR1, COMP_EXTI_LINE_COMP1)     
+
+/**
+  * @brief  Clear the COMP1 D2 EXTI flag.
+  * @retval None
+  */
+#define __HAL_COMP_COMP1_EXTID2_CLEAR_FLAG()            WRITE_REG(EXTI_D2->PR1, COMP_EXTI_LINE_COMP1)
+
+#endif
+
+/**
+  * @brief  Enable the COMP2 EXTI line rising edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()    SET_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Disable the COMP2 EXTI line rising edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()   CLEAR_BIT(EXTI->RTSR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Enable the COMP2 EXTI line falling edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Disable the COMP2 EXTI line falling edge trigger. 
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Enable the COMP2 EXTI line rising & falling edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE()   do {                                           \
+                                                               __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE();  \
+                                                               __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \
+                                                             } while(0)
+
+/**
+  * @brief  Disable the COMP2 EXTI line rising & falling edge trigger.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE()   do {                                           \
+                                                               __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE();  \
+                                                               __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \
+                                                             } while(0)
+/**
+  * @brief  Enable the COMP2 EXTI line.
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTI_ENABLE_IT()             SET_BIT(EXTI_D1->IMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Disable the COMP2 EXTI line.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_IT()            CLEAR_BIT(EXTI_D1->IMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Enable the COMP2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT()          SET_BIT(EXTI_D1->EMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Disable the COMP2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT()          CLEAR_BIT(EXTI_D1->EMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Check whether the COMP2 EXTI line flag is set or not.
+  * @retval RESET or SET
+  */
+#define __HAL_COMP_COMP2_EXTI_GET_FLAG()              READ_BIT(EXTI_D1->PR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Clear the the COMP2 EXTI flag.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()            WRITE_REG(EXTI_D1->PR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Enable the COMP2 D3 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID3_ENABLE_EVENT()        SET_BIT(EXTI->D3PMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Disable the COMP2 D3 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID3_DISABLE_EVENT()       CLEAR_BIT(EXTI->D3PMR1, COMP_EXTI_LINE_COMP2)
+
+/**
+  * @brief  Generate a software interrupt on the COMP2 EXTI line.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT()         SET_BIT(EXTI->SWIER1, COMP_EXTI_LINE_COMP2)
+
+#if defined(DUAL_CORE)
+/**
+  * @brief  Enable the COMP2 D2 EXTI line
+  * @retval None
+  */                                         
+#define __HAL_COMP_COMP2_EXTID2_ENABLE_IT()           SET_BIT(EXTI_D2->IMR1, COMP_EXTI_LINE_COMP2)
+
+
+/**
+  * @brief  Disable the COMP2 D2 EXTI line.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID2_DISABLE_IT()          CLEAR_BIT(EXTI_D2->IMR1, COMP_EXTI_LINE_COMP2)
+
+
+
+/**
+  * @brief  Enable the COMP2 D2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID2_ENABLE_EVENT()         SET_BIT(EXTI_D2->EMR1, COMP_EXTI_LINE_COMP2)
+
+
+
+/**
+  * @brief  Disable the COMP2 D2 EXTI Line in event mode.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID2_DISABLE_EVENT()        CLEAR_BIT(EXTI_D2->EMR1, COMP_EXTI_LINE_COMP2)
+
+
+/**
+  * @brief  Check whether the COMP2 D2 EXTI line flag is set or not.
+  * @retval RESET or SET
+  */
+#define __HAL_COMP_COMP2_EXTID2_GET_FLAG()            READ_BIT(EXTI_D2->PR1, COMP_EXTI_LINE_COMP2)     
+
+/**
+  * @brief  Clear the the COMP2 D2 EXTI flag.
+  * @retval None
+  */
+#define __HAL_COMP_COMP2_EXTID2_CLEAR_FLAG()          WRITE_REG(EXTI_D2->PR1, COMP_EXTI_LINE_COMP2)
+
+#endif
+/** @brief  Checks if the specified COMP interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the COMP Handle.
+  *         This parameter can be COMP1 where x: 1 or 2 to select the COMP peripheral.
+  * @param  __INTERRUPT__: specifies the COMP interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg COMP_IT_EN: Comparator interrupt enable
+  *   
+  * @retval The new state of __IT__ (TRUE or FALSE)
+  */
+#define __HAL_COMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CFGR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified COMP flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg COMP_FLAG_C1I:  Comparator 1 Interrupt Flag
+  *            @arg COMP_FLAG_C2I:  Comparator 2 Interrupt Flag
+  *            @retval The new state of __FLAG__ (TRUE or FALSE)
+  */
+#define __HAL_COMP_GET_FLAG(__FLAG__)     ((COMP12->SR & (__FLAG__)) == (__FLAG__))   
+
+/** @brief  Clears the specified COMP pending flag.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg COMP_CLEAR_C1IF  : Clear Comparator 1 Interrupt Flag
+  *            @arg COMP_CLEAR_C2IF  : Clear Comparator 2 Interrupt Flag
+  * @retval None
+  */
+#define __HAL_COMP_CLEAR_FLAG(__FLAG__)   (COMP12->ICFR = (__FLAG__))
+
+/** @brief  Clear the COMP C1I  flag.
+  * @retval None
+  */
+#define __HAL_COMP_CLEAR_C1IFLAG()   __HAL_COMP_CLEAR_FLAG( COMP_CLEAR_C1IF)
+
+/** @brief  Clear the COMP C2I  flag.
+  * @retval None
+  */
+#define __HAL_COMP_CLEAR_C2IFLAG()   __HAL_COMP_CLEAR_FLAG( COMP_CLEAR_C2IF)
+
+/** @brief  Enable the specified COMP interrupt.
+  * @param  __HANDLE__: specifies the COMP Handle.
+  * @param  __INTERRUPT__: specifies the COMP interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg COMP_CFGRx_ITEN :  Comparator  interrupt
+  * @retval None
+  */
+#define __HAL_COMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ( ((__HANDLE__)->Instance->CFGR) |= (__INTERRUPT__) )
+
+/** @brief  Disable the specified COMP interrupt.
+  * @param  __HANDLE__: specifies the COMP Handle.
+  * @param  __INTERRUPT__: specifies the COMP interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg COMP_CFGRx_ITEN :  Comparator  interrupt
+  * @retval None
+  */
+#define __HAL_COMP_DISABLE_IT(__HANDLE__,__INTERRUPT__) (((__HANDLE__)->Instance->CFGR) &= ~(__INTERRUPT__))
+
+/**
+  * @}
+  */
+/** @brief  Enable the specified bit in the Option register.
+  * @param  __AF__: specifies the Alternate Function source selection .
+  *          This parameter can be one of the following values:
+  *            @arg COMP_OR_AFOPA6  :  Alternate Function PA6 source selection
+  *            @arg COMP_OR_AFOPA8  :  Alternate Function PA8 source selection
+  *            @arg COMP_OR_AFOPB12 :  Alternate Function PB12 source selection
+  *            @arg COMP_OR_AFOPE6  :  Alternate Function PE6 source selection
+  *            @arg COMP_OR_AFOPE15 :  Alternate Function PE15 source selection
+  *            @arg COMP_OR_AFOPG2  :  Alternate Function PG2 source selection
+  *            @arg COMP_OR_AFOPG3  :  Alternate Function PG3 source selection
+  *            @arg COMP_OR_AFOPG4  :  Alternate Function PG4 source selection
+  *            @arg COMP_OR_AFOPI1  :  Alternate Function PI1 source selection
+  *            @arg COMP_OR_AFOPI4  :  Alternate Function PI4 source selection 
+  *            @arg COMP_OR_AFOPK2  :  Alternate Function PK2 source selection
+  * @retval None
+  */
+#define __HAL_COMP_ENABLE_OR(__AF__) SET_BIT(COMP12->OR, (__AF__))
+
+/** @brief  Disable the specified bit in the Option register.
+  * @param  __AF__: specifies the Alternate Function source selection .
+  *          This parameter can be one of the following values:
+  *            @arg COMP_OR_AFOPA6  :  Alternate Function PA6 source selection
+  *            @arg COMP_OR_AFOPA8  :  Alternate Function PA8 source selection
+  *            @arg COMP_OR_AFOPB12 :  Alternate Function PB12 source selection
+  *            @arg COMP_OR_AFOPE6  :  Alternate Function PE6 source selection
+  *            @arg COMP_OR_AFOPE15 :  Alternate Function PE15 source selection
+  *            @arg COMP_OR_AFOPG2  :  Alternate Function PG2 source selection
+  *            @arg COMP_OR_AFOPG3  :  Alternate Function PG3 source selection
+  *            @arg COMP_OR_AFOPG4  :  Alternate Function PG4 source selection
+  *            @arg COMP_OR_AFOPI1  :  Alternate Function PI1 source selection
+  *            @arg COMP_OR_AFOPI4  :  Alternate Function PI4 source selection
+  *            @arg COMP_OR_AFOPK2  :  Alternate Function PK2 source selection  
+  * @retval None
+  */
+#define __HAL_COMP_DISABLE_OR(__AF__) CLEAR_BIT(COMP12->OR, (__AF__))
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup COMP_Private_Constants COMP Private Constants
+  * @{
+  */
+/** @defgroup COMP_ExtiLine COMP EXTI Lines
+  * @{
+  */
+#define COMP_EXTI_LINE_COMP1           (EXTI_IMR1_IM20)  /*!< EXTI line 20 connected to COMP1 output */
+#define COMP_EXTI_LINE_COMP2           (EXTI_IMR1_IM21)  /*!< EXTI line 21 connected to COMP2 output */
+/**
+  * @}
+  */
+/** @defgroup COMP_ExtiLine COMP EXTI Lines
+  * @{
+  */
+#define COMP_EXTI_IT                        ((uint32_t) 0x01)  /*!< EXTI line event with interruption */
+#define COMP_EXTI_EVENT                     ((uint32_t) 0x02)  /*!< EXTI line event only (without interruption) */
+#define COMP_EXTI_RISING                    ((uint32_t) 0x10)  /*!< EXTI line event on rising edge */
+#define COMP_EXTI_FALLING                   ((uint32_t) 0x20)  /*!< EXTI line event on falling edge */
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup COMP_Private_Macros COMP Private Macros
+  * @{
+  */
+/** @defgroup COMP_GET_EXTI_LINE COMP Private macros to get EXTI line associated with Comparators 
+  * @{
+  */
+/**
+  * @brief  Get the specified EXTI line for a comparator instance.
+  * @param  __INSTANCE__: specifies the COMP instance.
+  * @retval value of @ref COMP_ExtiLine
+  */
+#define COMP_GET_EXTI_LINE(__INSTANCE__)             (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \
+                                                      COMP_EXTI_LINE_COMP2)
+/**
+  * @}
+  */
+/** @defgroup COMP_IS_COMP_Definitions COMP private macros to check input parameters
+  * @{
+  */
+#define IS_COMP_WINDOWMODE(__WINDOWMODE__)  (((__WINDOWMODE__) == COMP_WINDOWMODE_DISABLE)                || \
+                                             ((__WINDOWMODE__) == COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON)  )
+
+#define IS_COMP_POWERMODE(__POWERMODE__)    (((__POWERMODE__) == COMP_POWERMODE_HIGHSPEED)    || \
+                                             ((__POWERMODE__) == COMP_POWERMODE_MEDIUMSPEED)  || \
+                                             ((__POWERMODE__) == COMP_POWERMODE_ULTRALOWPOWER)  )
+
+#if defined (COMP_CFGRx_INP2SEL)
+#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \
+                                                               ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2) || \
+                                                               ((__INPUT_PLUS__) == COMP_INPUT_PLUS_DAC2_CH1))
+#else
+#define IS_COMP_INPUT_PLUS(__COMP_INSTANCE__, __INPUT_PLUS__) (((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO1) || \
+                                                               ((__INPUT_PLUS__) == COMP_INPUT_PLUS_IO2))                                                              
+#endif                                                             
+
+
+#if defined (COMP_CFGRx_INMSEL_3)
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)     || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)     || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)     || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)        || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)       || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)       || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)            || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2)            || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_TPSENS_DAC2CH1) || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VBAT_VDDAP))
+#else                                          
+#define IS_COMP_INPUT_MINUS(__COMP_INSTANCE__, __INPUT_MINUS__) (((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_4VREFINT)  || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_1_2VREFINT)  || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_3_4VREFINT)  || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_VREFINT)     || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH1)    || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_DAC1_CH2)    || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO1)         || \
+                                                                 ((__INPUT_MINUS__) == COMP_INPUT_MINUS_IO2))                                                                  
+#endif
+
+#define IS_COMP_HYSTERESIS(__HYSTERESIS__)  (((__HYSTERESIS__) == COMP_HYSTERESIS_NONE)   || \
+                                             ((__HYSTERESIS__) == COMP_HYSTERESIS_LOW)    || \
+                                             ((__HYSTERESIS__) == COMP_HYSTERESIS_MEDIUM) || \
+                                             ((__HYSTERESIS__) == COMP_HYSTERESIS_HIGH))
+
+#define IS_COMP_OUTPUTPOL(__POL__)          (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \
+                                             ((__POL__) == COMP_OUTPUTPOL_INVERTED))
+
+#define IS_COMP_BLANKINGSRCE(__SOURCE__)    (((__SOURCE__) == COMP_BLANKINGSRC_NONE)      || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM1_OC5)  || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM2_OC3)  || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC3)  || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM3_OC4)  || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM8_OC5)  || \
+                                             ((__SOURCE__) == COMP_BLANKINGSRC_TIM15_OC1))
+
+
+#define IS_COMP_TRIGGERMODE(__MODE__)       (((__MODE__) == COMP_TRIGGERMODE_NONE)                 || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_IT_RISING)            || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING)           || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING)    || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING)         || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING)        || \
+                                             ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING))
+
+#define IS_COMP_OUTPUT_LEVEL(__OUTPUT_LEVEL__) (((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_LOW)     || \
+                                                ((__OUTPUT_LEVEL__) == COMP_OUTPUT_LEVEL_HIGH))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup COMP_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+#if (USE_HAL_COMP_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_COMP_RegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID, pCOMP_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_COMP_UnRegisterCallback(COMP_HandleTypeDef *hcomp, HAL_COMP_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_COMP_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* IO operation functions  *****************************************************/
+/** @addtogroup COMP_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup COMP_Exported_Functions_Group3
+  * @{
+  */
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t          HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+/* Callback in Interrupt mode */
+void              HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  **************************************************/
+/** @addtogroup COMP_Exported_Functions_Group4
+  * @{
+  */
+HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+uint32_t              HAL_COMP_GetError(COMP_HandleTypeDef *hcomp);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_conf_template.h

@@ -0,0 +1,513 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32h7xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CONF_H
+#define STM32H7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORDIC_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_DTS_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GFXMMU_MODULE_ENABLED
+#define HAL_FMAC_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_HRTIM_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_JPEG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_MDIOS_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_OSPI_MODULE_ENABLED
+#define HAL_OTFDEC_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_PSSI_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RAMECC_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SWPMI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    (25000000UL) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal  oscillator (CSI) default value.
+  *        This value is the default CSI value after Reset.
+  */
+#if !defined  (CSI_VALUE)
+  #define CSI_VALUE    (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (64000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+  #define LSE_VALUE    (32768UL) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000UL)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+#if !defined  (LSI_VALUE)
+  #define LSI_VALUE  (32000UL)              /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                              The real value may vary depending on the variations
+                                              in voltage and temperature.*/
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000UL /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE                    (3300UL) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (0x0FUL) /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+#define  USE_SD_TRANSCEIVER           1U               /*!< use uSD Transceiver */
+#define  USE_SPI_CRC                  1U               /*!< use CRC in SPI */
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */
+#define  USE_HAL_COMP_REGISTER_CALLBACKS    0U /* COMP register callback disabled    */
+#define  USE_HAL_CORDIC_REGISTER_CALLBACKS  0U /* CORDIC register callback disabled  */ 
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS    0U /* CRYP register callback disabled    */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS     0U /* DAC register callback disabled     */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS    0U /* DCMI register callback disabled    */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled   */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled   */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS     0U /* DSI register callback disabled     */
+#define  USE_HAL_DTS_REGISTER_CALLBACKS     0U /* DTS register callback disabled     */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS     0U /* ETH register callback disabled     */
+#define  USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled   */
+#define  USE_HAL_FMAC_REGISTER_CALLBACKS    0U /* FMAC register callback disabled  */ 
+#define  USE_HAL_NAND_REGISTER_CALLBACKS    0U /* NAND register callback disabled    */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS     0U /* NOR register callback disabled     */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled   */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS    0U /* SRAM register callback disabled    */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS    0U /* HASH register callback disabled    */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS     0U /* HCD register callback disabled     */
+#define  USE_HAL_GFXMMU_REGISTER_CALLBACKS  0U /* GFXMMU register callback disabled  */
+#define  USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled   */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS     0U /* I2C register callback disabled     */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS     0U /* I2S register callback disabled     */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS    0U /* IRDA register callback disabled    */
+#define  USE_HAL_JPEG_REGISTER_CALLBACKS    0U /* JPEG register callback disabled    */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled   */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS    0U /* LTDC register callback disabled    */
+#define  USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS     0U /* MMC register callback disabled     */
+#define  USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled    */
+#define  USE_HAL_OSPI_REGISTER_CALLBACKS    0U /* OSPI register callback disabled    */
+#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS  0U /* OTFDEC register callback disabled  */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS     0U /* PCD register callback disabled     */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS    0U /* QSPI register callback disabled    */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS     0U /* RNG register callback disabled     */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS     0U /* RTC register callback disabled     */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS     0U /* SAI register callback disabled     */
+#define  USE_HAL_SD_REGISTER_CALLBACKS      0U /* SD register callback disabled      */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS  0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled   */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS     0U /* SPI register callback disabled     */
+#define  USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled   */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS     0U /* TIM register callback disabled     */
+#define  USE_HAL_UART_REGISTER_CALLBACKS    0U /* UART register callback disabled    */
+#define  USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled   */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS    0U /* WWDG register callback disabled    */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT         4  /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT         4  /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0    (0x02UL)
+#define ETH_MAC_ADDR1    (0x00UL)
+#define ETH_MAC_ADDR2    (0x00UL)
+#define ETH_MAC_ADDR3    (0x00UL)
+#define ETH_MAC_ADDR4    (0x00UL)
+#define ETH_MAC_ADDR5    (0x00UL)
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+  #include "stm32h7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+  #include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DTS_MODULE_ENABLED
+ #include "stm32h7xx_hal_dts.h"
+#endif /* HAL_DTS_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+  #include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORDIC_MODULE_ENABLED
+  #include "stm32h7xx_hal_cordic.h"
+#endif /* HAL_CORDIC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32h7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GFXMMU_MODULE_ENABLED
+  #include "stm32h7xx_hal_gfxmmu.h"
+#endif /* HAL_GFXMMU_MODULE_ENABLED */
+
+#ifdef HAL_FMAC_MODULE_ENABLED
+  #include "stm32h7xx_hal_fmac.h"
+#endif /* HAL_FMAC_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+ #include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+ #include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_OSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_ospi.h"
+#endif /* HAL_OSPI_MODULE_ENABLED */
+
+#ifdef HAL_OTFDEC_MODULE_ENABLED
+#include "stm32h7xx_hal_otfdec.h"
+#endif /* HAL_OTFDEC_MODULE_ENABLED */
+
+#ifdef HAL_PSSI_MODULE_ENABLED
+ #include "stm32h7xx_hal_pssi.h"
+#endif /* HAL_PSSI_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+ #include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_RAMECC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+ #include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t *file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cordic.h

@@ -0,0 +1,599 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_cordic.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the CORDIC firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CORDIC_H
+#define STM32H7xx_HAL_CORDIC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined(CORDIC)
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORDIC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORDIC_Exported_Types CORDIC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  CORDIC HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_CORDIC_STATE_RESET     = 0x00U,  /*!< CORDIC not yet initialized or disabled */
+  HAL_CORDIC_STATE_READY     = 0x01U,  /*!< CORDIC initialized and ready for use   */
+  HAL_CORDIC_STATE_BUSY      = 0x02U,  /*!< CORDIC internal process is ongoing     */
+  HAL_CORDIC_STATE_ERROR     = 0x03U   /*!< CORDIC error state                     */
+} HAL_CORDIC_StateTypeDef;
+
+/**
+  * @brief  CORDIC Handle Structure definition
+  */
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+typedef struct __CORDIC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */
+{
+  CORDIC_TypeDef                *Instance;   /*!< Register base address */
+
+  int32_t                       *pInBuff;    /*!< Pointer to CORDIC input data buffer */
+
+  int32_t                       *pOutBuff;   /*!< Pointer to CORDIC output data buffer */
+
+  uint32_t                      NbCalcToOrder; /*!< Remaining number of calculation to order */
+
+  uint32_t                      NbCalcToGet; /*!< Remaining number of calculation result to get */
+
+  uint32_t                      DMADirection; /*!< Direction of CORDIC DMA transfers */
+
+  DMA_HandleTypeDef             *hdmaIn;     /*!< CORDIC peripheral input data DMA handle parameters */
+
+  DMA_HandleTypeDef             *hdmaOut;    /*!< CORDIC peripheral output data DMA handle parameters */
+
+  HAL_LockTypeDef               Lock;        /*!< CORDIC locking object */
+
+  __IO HAL_CORDIC_StateTypeDef  State;       /*!< CORDIC state */
+
+  __IO uint32_t                 ErrorCode;   /*!< CORDIC peripheral error code
+                                                  This parameter can be a value of @ref CORDIC_Error_Code */
+
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+  void (* ErrorCallback)(struct __CORDIC_HandleTypeDef *hcordic);          /*!< CORDIC error callback */
+  void (* CalculateCpltCallback)(struct __CORDIC_HandleTypeDef *hcordic);  /*!< CORDIC calculate complete callback */
+
+  void (* MspInitCallback)(struct __CORDIC_HandleTypeDef *hcordic);        /*!< CORDIC Msp Init callback */
+  void (* MspDeInitCallback)(struct __CORDIC_HandleTypeDef *hcordic);      /*!< CORDIC Msp DeInit callback */
+
+#endif /* (USE_HAL_CORDIC_REGISTER_CALLBACKS) */
+
+} CORDIC_HandleTypeDef;
+
+/**
+  * @brief  CORDIC Config Structure definition
+  */
+typedef struct
+{
+  uint32_t   Function;     /*!< Function
+                                This parameter can be a value of @ref CORDIC_Function */
+
+  uint32_t   Scale;        /*!< Scaling factor
+                                This parameter can be a value of @ref CORDIC_Scale */
+
+  uint32_t   InSize;       /*!< Width of input data
+                                This parameter can be a value of @ref CORDIC_In_Size */
+
+  uint32_t   OutSize;      /*!< Width of output data
+                                This parameter can be a value of @ref CORDIC_Out_Size */
+
+  uint32_t   NbWrite;      /*!< Number of 32-bit write expected for one calculation
+                                This parameter can be a value of @ref CORDIC_Nb_Write */
+
+  uint32_t   NbRead;       /*!< Number of 32-bit read expected after one calculation
+                                This parameter can be a value of @ref CORDIC_Nb_Read */
+
+  uint32_t   Precision;    /*!< Number of cycles for calculation
+                                This parameter can be a value of @ref CORDIC_Precision_In_Cycles_Number */
+
+} CORDIC_ConfigTypeDef;
+
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+/**
+  * @brief  HAL CORDIC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_CORDIC_ERROR_CB_ID             = 0x00U,    /*!< CORDIC error callback ID */
+  HAL_CORDIC_CALCULATE_CPLT_CB_ID    = 0x01U,    /*!< CORDIC calculate complete callback ID */
+
+  HAL_CORDIC_MSPINIT_CB_ID           = 0x02U,    /*!< CORDIC MspInit callback ID */
+  HAL_CORDIC_MSPDEINIT_CB_ID         = 0x03U,    /*!< CORDIC MspDeInit callback ID */
+
+} HAL_CORDIC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL CORDIC Callback pointer definition
+  */
+typedef  void (*pCORDIC_CallbackTypeDef)(CORDIC_HandleTypeDef *hcordic);  /*!< pointer to a CORDIC callback function */
+
+#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORDIC_Exported_Constants CORDIC Exported Constants
+  * @{
+  */
+
+/** @defgroup CORDIC_Error_Code CORDIC Error code
+  * @{
+  */
+#define HAL_CORDIC_ERROR_NONE              ((uint32_t)0x00000000U)   /*!< No error                */
+#define HAL_CORDIC_ERROR_PARAM             ((uint32_t)0x00000001U)   /*!< Wrong parameter error   */
+#define HAL_CORDIC_ERROR_NOT_READY         ((uint32_t)0x00000002U)   /*!< Peripheral not ready    */
+#define HAL_CORDIC_ERROR_TIMEOUT           ((uint32_t)0x00000004U)   /*!< Timeout error           */
+#define HAL_CORDIC_ERROR_DMA               ((uint32_t)0x00000008U)   /*!< DMA error               */
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+#define HAL_CORDIC_ERROR_INVALID_CALLBACK  ((uint32_t)0x00000010U)   /*!< Invalid Callback error  */
+#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Function CORDIC Function
+  * @{
+  */
+#define CORDIC_FUNCTION_COSINE      (0x00000000U)                                                          /*!< Cosine */
+#define CORDIC_FUNCTION_SINE        ((uint32_t)(CORDIC_CSR_FUNC_0))                                        /*!< Sine */
+#define CORDIC_FUNCTION_PHASE       ((uint32_t)(CORDIC_CSR_FUNC_1))                                        /*!< Phase */
+#define CORDIC_FUNCTION_MODULUS     ((uint32_t)(CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0))                    /*!< Modulus */
+#define CORDIC_FUNCTION_ARCTANGENT  ((uint32_t)(CORDIC_CSR_FUNC_2))                                        /*!< Arctangent */
+#define CORDIC_FUNCTION_HCOSINE     ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_0))                    /*!< Hyperbolic Cosine */
+#define CORDIC_FUNCTION_HSINE       ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1))                    /*!< Hyperbolic Sine */
+#define CORDIC_FUNCTION_HARCTANGENT ((uint32_t)(CORDIC_CSR_FUNC_2 | CORDIC_CSR_FUNC_1 | CORDIC_CSR_FUNC_0))/*!< Hyperbolic Arctangent */
+#define CORDIC_FUNCTION_NATURALLOG  ((uint32_t)(CORDIC_CSR_FUNC_3))                                        /*!< Natural Logarithm */
+#define CORDIC_FUNCTION_SQUAREROOT  ((uint32_t)(CORDIC_CSR_FUNC_3 | CORDIC_CSR_FUNC_0))                    /*!< Square Root */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Precision_In_Cycles_Number CORDIC Precision in Cycles Number
+  * @{
+  */
+/* Note: 1 cycle corresponds to 4 algorithm iterations */
+#define CORDIC_PRECISION_1CYCLE     ((uint32_t)(CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_2CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_1))
+#define CORDIC_PRECISION_3CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_4CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_2))
+#define CORDIC_PRECISION_5CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_6CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1))
+#define CORDIC_PRECISION_7CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_8CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_3))
+#define CORDIC_PRECISION_9CYCLES    ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_10CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_1))
+#define CORDIC_PRECISION_11CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_12CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2))
+#define CORDIC_PRECISION_13CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_0))
+#define CORDIC_PRECISION_14CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1))
+#define CORDIC_PRECISION_15CYCLES   ((uint32_t)(CORDIC_CSR_PRECISION_3 | CORDIC_CSR_PRECISION_2 | CORDIC_CSR_PRECISION_1 | CORDIC_CSR_PRECISION_0))
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Scale CORDIC Scaling factor
+  * @{
+  */
+/* Scale factor value 'n' implies that the input data have been multiplied
+   by a factor 2exp(-n), and/or the output data need to be multiplied by 2exp(n). */
+#define CORDIC_SCALE_0              (0x00000000U)
+#define CORDIC_SCALE_1              ((uint32_t)(CORDIC_CSR_SCALE_0))
+#define CORDIC_SCALE_2              ((uint32_t)(CORDIC_CSR_SCALE_1))
+#define CORDIC_SCALE_3              ((uint32_t)(CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0))
+#define CORDIC_SCALE_4              ((uint32_t)(CORDIC_CSR_SCALE_2))
+#define CORDIC_SCALE_5              ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_0))
+#define CORDIC_SCALE_6              ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1))
+#define CORDIC_SCALE_7              ((uint32_t)(CORDIC_CSR_SCALE_2 | CORDIC_CSR_SCALE_1 | CORDIC_CSR_SCALE_0))
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Interrupts_Enable CORDIC Interrupts Enable bit
+  * @{
+  */
+#define CORDIC_IT_IEN              CORDIC_CSR_IEN            /*!< Result ready interrupt enable */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_DMAR DMA Read Request Enable bit
+  * @{
+  */
+#define CORDIC_DMA_REN             CORDIC_CSR_DMAREN         /*!< DMA Read requests enable */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_DMAW DMA Write Request Enable bit
+  * @{
+  */
+#define CORDIC_DMA_WEN             CORDIC_CSR_DMAWEN         /*!< DMA Write channel enable */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Nb_Write CORDIC Number of 32-bit write required for one calculation
+  * @{
+  */
+#define CORDIC_NBWRITE_1           (0x00000000U)             /*!< One 32-bits write containing either only one
+                                                                  32-bit data input (Q1.31 format), or two 16-bit
+                                                                  data input (Q1.15 format) packed in one 32 bits Data */
+#define CORDIC_NBWRITE_2           CORDIC_CSR_NARGS          /*!< Two 32-bit write containing two 32-bits data input
+                                                                  (Q1.31 format) */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Nb_Read CORDIC Number of 32-bit read required after one calculation
+  * @{
+  */
+#define CORDIC_NBREAD_1            (0x00000000U)             /*!< One 32-bits read containing either only one
+                                                                  32-bit data ouput (Q1.31 format), or two 16-bit
+                                                                  data output (Q1.15 format) packed in one 32 bits Data */
+#define CORDIC_NBREAD_2            CORDIC_CSR_NRES           /*!< Two 32-bit Data containing two 32-bits data output
+                                                                  (Q1.31 format) */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_In_Size CORDIC input data size
+  * @{
+  */
+#define CORDIC_INSIZE_32BITS       (0x00000000U)             /*!< 32 bits input data size (Q1.31 format) */
+#define CORDIC_INSIZE_16BITS       CORDIC_CSR_ARGSIZE        /*!< 16 bits input data size (Q1.15 format) */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Out_Size CORDIC Results Size
+  * @{
+  */
+#define CORDIC_OUTSIZE_32BITS      (0x00000000U)             /*!< 32 bits output data size (Q1.31 format) */
+#define CORDIC_OUTSIZE_16BITS      CORDIC_CSR_RESSIZE        /*!< 16 bits output data size (Q1.15 format) */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_Flags  CORDIC status flags
+  * @{
+  */
+#define CORDIC_FLAG_RRDY           CORDIC_CSR_RRDY           /*!< Result Ready Flag */
+/**
+  * @}
+  */
+
+/** @defgroup CORDIC_DMA_Direction CORDIC DMA direction
+  * @{
+  */
+#define CORDIC_DMA_DIR_NONE        ((uint32_t)0x00000000U)   /*!< DMA direction : none */
+#define CORDIC_DMA_DIR_IN          ((uint32_t)0x00000001U)   /*!< DMA direction : Input of CORDIC */
+#define CORDIC_DMA_DIR_OUT         ((uint32_t)0x00000002U)   /*!< DMA direction : Output of CORDIC */
+#define CORDIC_DMA_DIR_IN_OUT      ((uint32_t)0x00000003U)   /*!< DMA direction : Input and Output of CORDIC */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CORDIC_Exported_Macros CORDIC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CORDIC handle state.
+  * @param  __HANDLE__ CORDIC handle
+  * @retval None
+  */
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+#define __HAL_CORDIC_RESET_HANDLE_STATE(__HANDLE__) do{                                                \
+                                                       (__HANDLE__)->State = HAL_CORDIC_STATE_RESET;   \
+                                                       (__HANDLE__)->MspInitCallback = NULL;           \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;         \
+                                                      } while(0)
+#else
+#define __HAL_CORDIC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CORDIC_STATE_RESET)
+#endif /*USE_HAL_CORDIC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the CORDIC interrupt when result is ready
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __INTERRUPT__ CORDIC Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg @ref CORDIC_IT_IEN Enable Interrupt
+  * @retval None
+  */
+#define __HAL_CORDIC_ENABLE_IT(__HANDLE__, __INTERRUPT__)                     \
+                  (((__HANDLE__)->Instance->CSR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CORDIC interrupt
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __INTERRUPT__ CORDIC Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg @ref CORDIC_IT_IEN Enable Interrupt
+  * @retval None
+  */
+#define __HAL_CORDIC_DISABLE_IT(__HANDLE__, __INTERRUPT__)                    \
+                 (((__HANDLE__)->Instance->CSR) &= ~(__INTERRUPT__))
+
+/** @brief  Check whether the specified CORDIC interrupt occurred or not.
+            Dummy macro as no interrupt status flag.
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __INTERRUPT__ CORDIC interrupt to check
+  * @retval SET (interrupt occurred) or RESET (interrupt did not occurred)
+  */
+#define __HAL_CORDIC_GET_IT(__HANDLE__, __INTERRUPT__)     /* Dummy macro */
+
+/** @brief  Clear specified CORDIC interrupt status. Dummy macro as no
+            interrupt status flag.
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __INTERRUPT__ CORDIC interrupt to clear
+  * @retval None
+  */
+#define __HAL_CORDIC_CLEAR_IT(__HANDLE__, __INTERRUPT__)   /* Dummy macro */
+
+/** @brief  Check whether the specified CORDIC status flag is set or not.
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __FLAG__ CORDIC flag to check
+  *         This parameter can be one of the following values:
+  *            @arg @ref CORDIC_FLAG_RRDY Result Ready Flag
+  * @retval SET (flag is set) or RESET (flag is reset)
+  */
+#define __HAL_CORDIC_GET_FLAG(__HANDLE__, __FLAG__)                           \
+        ((((__HANDLE__)->Instance->CSR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear specified CORDIC status flag. Dummy macro as no
+            flag can be cleared.
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __FLAG__ CORDIC flag to clear
+  *         This parameter can be one of the following values:
+  *            @arg @ref CORDIC_FLAG_RRDY Result Ready Flag
+  * @retval None
+  */
+#define __HAL_CORDIC_CLEAR_FLAG(__HANDLE__, __FLAG__)     /* Dummy macro */
+
+/** @brief  Check whether the specified CORDIC interrupt is enabled or not.
+  * @param  __HANDLE__ CORDIC handle.
+  * @param  __INTERRUPT__ CORDIC interrupt to check
+  *         This parameter can be one of the following values:
+  *            @arg @ref CORDIC_IT_IEN Enable Interrupt
+  * @retval FlagStatus
+  */
+#define __HAL_CORDIC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)                 \
+        (((__HANDLE__)->Instance->CSR) & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup  CORDIC_Private_Macros   CORDIC Private Macros
+  * @{
+  */
+
+/**
+  * @brief  Verify the CORDIC function.
+  * @param  __FUNCTION__ Name of the function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_CORDIC_FUNCTION(__FUNCTION__) (((__FUNCTION__) == CORDIC_FUNCTION_COSINE)       || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_SINE)         || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_PHASE)        || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_MODULUS)      || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_ARCTANGENT)   || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_HCOSINE)      || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_HSINE)        || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_HARCTANGENT)  || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_NATURALLOG)   || \
+                                          ((__FUNCTION__) == CORDIC_FUNCTION_SQUAREROOT))
+
+
+/**
+  * @brief  Verify the CORDIC precision.
+  * @param  __PRECISION__ CORDIC Precision in Cycles Number.
+  * @retval SET (__PRECISION__ is a valid value) or RESET (__PRECISION__ is invalid)
+  */
+#define IS_CORDIC_PRECISION(__PRECISION__) (((__PRECISION__) == CORDIC_PRECISION_1CYCLE)   || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_2CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_3CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_4CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_5CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_6CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_7CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_8CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_9CYCLES)  || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_10CYCLES) || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_11CYCLES) || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_12CYCLES) || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_13CYCLES) || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_14CYCLES) || \
+                                            ((__PRECISION__) == CORDIC_PRECISION_15CYCLES))
+
+/**
+  * @brief  Verify the CORDIC scaling factor.
+  * @param  __SCALE__ Number of cycles for calculation, 1 cycle corresponding to 4 algorithm iterations.
+  * @retval SET (__SCALE__ is a valid value) or RESET (__SCALE__ is invalid)
+  */
+#define IS_CORDIC_SCALE(__SCALE__) (((__SCALE__) == CORDIC_SCALE_0)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_1)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_2)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_3)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_4)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_5)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_6)  || \
+                                    ((__SCALE__) == CORDIC_SCALE_7))
+
+/**
+  * @brief  Verify the CORDIC number of 32-bits write expected for one calculation.
+  * @param  __NBWRITE__ Number of 32-bits write expected for one calculation.
+  * @retval SET (__NBWRITE__ is a valid value) or RESET (__NBWRITE__ is invalid)
+  */
+#define IS_CORDIC_NBWRITE(__NBWRITE__) (((__NBWRITE__) == CORDIC_NBWRITE_1)  || \
+                                        ((__NBWRITE__) == CORDIC_NBWRITE_2))
+
+/**
+  * @brief  Verify the CORDIC number of 32-bits read expected after one calculation.
+  * @param  __NBREAD__ Number of 32-bits read expected after one calculation.
+  * @retval SET (__NBREAD__ is a valid value) or RESET (__NBREAD__ is invalid)
+  */
+#define IS_CORDIC_NBREAD(__NBREAD__) (((__NBREAD__) == CORDIC_NBREAD_1)  || \
+                                      ((__NBREAD__) == CORDIC_NBREAD_2))
+
+/**
+  * @brief  Verify the CORDIC input data size for one calculation.
+  * @param  __INSIZE__ input data size for one calculation.
+  * @retval SET (__INSIZE__ is a valid value) or RESET (__INSIZE__ is invalid)
+  */
+#define IS_CORDIC_INSIZE(__INSIZE__) (((__INSIZE__) == CORDIC_INSIZE_32BITS)  || \
+                                      ((__INSIZE__) == CORDIC_INSIZE_16BITS))
+
+/**
+  * @brief  Verify the CORDIC output data size for one calculation.
+  * @param  __OUTSIZE__ output data size for one calculation.
+  * @retval SET (__OUTSIZE__ is a valid value) or RESET (__OUTSIZE__ is invalid)
+  */
+#define IS_CORDIC_OUTSIZE(__OUTSIZE__) (((__OUTSIZE__) == CORDIC_OUTSIZE_32BITS)  || \
+                                        ((__OUTSIZE__) == CORDIC_OUTSIZE_16BITS))
+
+/**
+  * @brief  Verify the CORDIC DMA transfer Direction.
+  * @param  __DMADIR__ DMA transfer direction.
+  * @retval SET (__DMADIR__ is a valid value) or RESET (__DMADIR__ is invalid)
+  */
+#define IS_CORDIC_DMA_DIRECTION(__DMADIR__) (((__DMADIR__) == CORDIC_DMA_DIR_IN)  || \
+                                             ((__DMADIR__) == CORDIC_DMA_DIR_OUT) || \
+                                             ((__DMADIR__) == CORDIC_DMA_DIR_IN_OUT))
+
+/**
+  * @}
+  */
+
+/** @addtogroup CORDIC_Exported_Functions
+  * @{
+  */
+/* Exported functions ------------------------------------------------------- */
+
+/** @addtogroup CORDIC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_CORDIC_Init(CORDIC_HandleTypeDef *hcordic);
+HAL_StatusTypeDef HAL_CORDIC_DeInit(CORDIC_HandleTypeDef *hcordic);
+void HAL_CORDIC_MspInit(CORDIC_HandleTypeDef *hcordic);
+void HAL_CORDIC_MspDeInit(CORDIC_HandleTypeDef *hcordic);
+
+#if USE_HAL_CORDIC_REGISTER_CALLBACKS == 1
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_CORDIC_RegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID, pCORDIC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CORDIC_UnRegisterCallback(CORDIC_HandleTypeDef *hcordic, HAL_CORDIC_CallbackIDTypeDef CallbackID);
+/**
+  * @}
+  */
+
+/** @addtogroup CORDIC_Exported_Functions_Group2
+  * @{
+  */
+#endif /* USE_HAL_CORDIC_REGISTER_CALLBACKS */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_CORDIC_Configure(CORDIC_HandleTypeDef *hcordic, CORDIC_ConfigTypeDef *sConfig);
+HAL_StatusTypeDef HAL_CORDIC_Calculate(CORDIC_HandleTypeDef *hcordic, int32_t *pInBuff, int32_t *pOutBuff, uint32_t NbCalc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CORDIC_CalculateZO(CORDIC_HandleTypeDef *hcordic, int32_t *pInBuff, int32_t *pOutBuff, uint32_t NbCalc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CORDIC_Calculate_IT(CORDIC_HandleTypeDef *hcordic, int32_t *pInBuff, int32_t *pOutBuff, uint32_t NbCalc);
+HAL_StatusTypeDef HAL_CORDIC_Calculate_DMA(CORDIC_HandleTypeDef *hcordic, int32_t *pInBuff, int32_t *pOutBuff, uint32_t NbCalc, uint32_t DMADirection);
+/**
+  * @}
+  */
+
+/** @addtogroup CORDIC_Exported_Functions_Group3
+  * @{
+  */
+/* Callback functions *********************************************************/
+void HAL_CORDIC_ErrorCallback(CORDIC_HandleTypeDef *hcordic);
+void HAL_CORDIC_CalculateCpltCallback(CORDIC_HandleTypeDef *hcordic);
+/**
+  * @}
+  */
+
+/** @addtogroup CORDIC_Exported_Functions_Group4
+  * @{
+  */
+/* IRQ handler management *****************************************************/
+void HAL_CORDIC_IRQHandler(CORDIC_HandleTypeDef *hcordic);
+/**
+  * @}
+  */
+
+/** @addtogroup CORDIC_Exported_Functions_Group5
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_CORDIC_StateTypeDef HAL_CORDIC_GetState(CORDIC_HandleTypeDef *hcordic);
+uint32_t HAL_CORDIC_GetError(CORDIC_HandleTypeDef *hcordic);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* CORDIC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CORDIC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h

@@ -0,0 +1,461 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CORTEX_H
+#define STM32H7xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable.
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region.
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+}MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+                                                                 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+                                                                 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+                                                                 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+                                                                 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+                                                                 0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK         ((uint32_t)0x00000004)
+
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE      ((uint32_t)0x00000000)
+#define  MPU_HARDFAULT_NMI           ((uint32_t)0x00000002)
+#define  MPU_PRIVILEGED_DEFAULT      ((uint32_t)0x00000004)
+#define  MPU_HFNMI_PRIVDEF           ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06)
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07)
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08)
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B)
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C)
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D)
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E)
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F)
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13)
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14)
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15)
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16)
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D)
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E)
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01)
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05)
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01)
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04)
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+#if !defined(CORE_CM4)
+#define  MPU_REGION_NUMBER8    ((uint8_t)0x08)
+#define  MPU_REGION_NUMBER9    ((uint8_t)0x09)
+#define  MPU_REGION_NUMBER10   ((uint8_t)0x0A)
+#define  MPU_REGION_NUMBER11   ((uint8_t)0x0B)
+#define  MPU_REGION_NUMBER12   ((uint8_t)0x0C)
+#define  MPU_REGION_NUMBER13   ((uint8_t)0x0D)
+#define  MPU_REGION_NUMBER14   ((uint8_t)0x0E)
+#define  MPU_REGION_NUMBER15   ((uint8_t)0x0F)
+#endif /* !defined(CORE_CM4) */
+
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+
+/** @defgroup CORTEX_CPU_Identifier CORTEX_CPU_Identifier
+  * @{
+  */
+#define CM7_CPUID        ((uint32_t)0x00000003)
+
+#if defined(DUAL_CORE)
+#define CM4_CPUID        ((uint32_t)0x00000001)
+#endif /*DUAL_CORE*/
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_Enable(uint32_t MPU_Control);
+void HAL_MPU_Disable(void);
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+uint32_t HAL_GetCurrentCPUID(void);
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10UL)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10UL)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                (((int32_t)IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#if !defined(CORE_CM4)
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER8)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER9)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER10) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER11) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER12) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER13) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER14) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER15))
+#else
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6)  || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+#endif /* !defined(CORE_CM4) */
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc.h

@@ -0,0 +1,343 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_crc.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CRC_H
+#define STM32H7xx_HAL_CRC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  CRC HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_CRC_STATE_RESET     = 0x00U,  /*!< CRC not yet initialized or disabled */
+  HAL_CRC_STATE_READY     = 0x01U,  /*!< CRC initialized and ready for use   */
+  HAL_CRC_STATE_BUSY      = 0x02U,  /*!< CRC internal process is ongoing     */
+  HAL_CRC_STATE_TIMEOUT   = 0x03U,  /*!< CRC timeout state                   */
+  HAL_CRC_STATE_ERROR     = 0x04U   /*!< CRC error state                     */
+} HAL_CRC_StateTypeDef;
+
+/**
+  * @brief CRC Init Structure definition
+  */
+typedef struct
+{
+  uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+                                            If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+                                            In that case, there is no need to set GeneratingPolynomial field.
+                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */
+
+  uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+                                           If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set. */
+
+  uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree
+                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE.   */
+
+  uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
+                                           Value can be either one of
+                                           @arg @ref CRC_POLYLENGTH_32B                  (32-bit CRC),
+                                           @arg @ref CRC_POLYLENGTH_16B                  (16-bit CRC),
+                                           @arg @ref CRC_POLYLENGTH_8B                   (8-bit CRC),
+                                           @arg @ref CRC_POLYLENGTH_7B                   (7-bit CRC). */
+
+  uint32_t InitValue;                 /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+                                           is set to DEFAULT_INIT_VALUE_ENABLE.   */
+
+  uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+                                           Can be either one of the following values
+                                           @arg @ref CRC_INPUTDATA_INVERSION_NONE       no input data inversion
+                                           @arg @ref CRC_INPUTDATA_INVERSION_BYTE       byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+                                           @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD   halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+                                           @arg @ref CRC_INPUTDATA_INVERSION_WORD       word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+  uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+                                            Can be either
+                                            @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE   no CRC inversion,
+                                            @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted into 0x22CC4488 */
+} CRC_InitTypeDef;
+
+/**
+  * @brief  CRC Handle Structure definition
+  */
+typedef struct
+{
+  CRC_TypeDef                 *Instance;   /*!< Register base address        */
+
+  CRC_InitTypeDef             Init;        /*!< CRC configuration parameters */
+
+  HAL_LockTypeDef             Lock;        /*!< CRC Locking object           */
+
+  __IO HAL_CRC_StateTypeDef   State;       /*!< CRC communication state      */
+
+  uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+                                            Can be either
+                                            @arg @ref CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
+                                            @arg @ref CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bit data)
+
+                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+                                           must occur if InputBufferFormat is not one of the three values listed above  */
+} CRC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+  * @{
+  */
+
+/** @defgroup CRC_Default_Polynomial_Value    Default CRC generating polynomial
+  * @{
+  */
+#define DEFAULT_CRC32_POLY      0x04C11DB7U  /*!<  X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Default_InitValue    Default CRC computation initialization value
+  * @{
+  */
+#define DEFAULT_CRC_INITVALUE   0xFFFFFFFFU  /*!< Initial CRC default value */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Default_Polynomial    Indicates whether or not default polynomial is used
+  * @{
+  */
+#define DEFAULT_POLYNOMIAL_ENABLE       ((uint8_t)0x00U)  /*!< Enable default generating polynomial 0x04C11DB7  */
+#define DEFAULT_POLYNOMIAL_DISABLE      ((uint8_t)0x01U)  /*!< Disable default generating polynomial 0x04C11DB7 */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Default_InitValue_Use    Indicates whether or not default init value is used
+  * @{
+  */
+#define DEFAULT_INIT_VALUE_ENABLE      ((uint8_t)0x00U) /*!< Enable initial CRC default value  */
+#define DEFAULT_INIT_VALUE_DISABLE     ((uint8_t)0x01U) /*!< Disable initial CRC default value */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral
+  * @{
+  */
+#define CRC_POLYLENGTH_32B                  0x00000000U        /*!< Resort to a 32-bit long generating polynomial */
+#define CRC_POLYLENGTH_16B                  CRC_CR_POLYSIZE_0  /*!< Resort to a 16-bit long generating polynomial */
+#define CRC_POLYLENGTH_8B                   CRC_CR_POLYSIZE_1  /*!< Resort to a 8-bit long generating polynomial  */
+#define CRC_POLYLENGTH_7B                   CRC_CR_POLYSIZE    /*!< Resort to a 7-bit long generating polynomial  */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+  * @{
+  */
+#define HAL_CRC_LENGTH_32B     32U          /*!< 32-bit long CRC */
+#define HAL_CRC_LENGTH_16B     16U          /*!< 16-bit long CRC */
+#define HAL_CRC_LENGTH_8B       8U          /*!< 8-bit long CRC  */
+#define HAL_CRC_LENGTH_7B       7U          /*!< 7-bit long CRC  */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+  * @{
+  */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED             0x00000000U  /*!< Undefined input data format    */
+#define CRC_INPUTDATA_FORMAT_BYTES                 0x00000001U  /*!< Input data in byte format      */
+#define CRC_INPUTDATA_FORMAT_HALFWORDS             0x00000002U  /*!< Input data in half-word format */
+#define CRC_INPUTDATA_FORMAT_WORDS                 0x00000003U  /*!< Input data in word format      */
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Aliases CRC API aliases
+  * @{
+  */
+#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse    /*!< Aliased to HAL_CRCEx_Input_Data_Reverse for inter STM32 series compatibility  */
+#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse   /*!< Aliased to HAL_CRCEx_Output_Data_Reverse for inter STM32 series compatibility */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+  * @{
+  */
+
+/** @brief Reset CRC handle state.
+  * @param  __HANDLE__ CRC handle.
+  * @retval None
+  */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+  * @brief  Reset CRC Data Register.
+  * @param  __HANDLE__ CRC handle
+  * @retval None
+  */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+  * @brief  Set CRC INIT non-default value
+  * @param  __HANDLE__ CRC handle
+  * @param  __INIT__ 32-bit initial value
+  * @retval None
+  */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+  * @brief Store data in the Independent Data (ID) register.
+  * @param __HANDLE__ CRC handle
+  * @param __VALUE__  Value to be stored in the ID register
+  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+  * @retval None
+  */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__)))
+
+/**
+  * @brief Return the data stored in the Independent Data (ID) register.
+  * @param __HANDLE__ CRC handle
+  * @note  Refer to the Reference Manual to get the authorized __VALUE__ length in bits
+  * @retval Value of the ID register
+  */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+  * @}
+  */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup  CRC_Private_Macros CRC Private Macros
+  * @{
+  */
+
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+                                        ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+
+#define IS_DEFAULT_INIT_VALUE(VALUE)  (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+                                       ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+
+#define IS_CRC_POL_LENGTH(LENGTH)     (((LENGTH) == CRC_POLYLENGTH_32B) || \
+                                       ((LENGTH) == CRC_POLYLENGTH_16B) || \
+                                       ((LENGTH) == CRC_POLYLENGTH_8B)  || \
+                                       ((LENGTH) == CRC_POLYLENGTH_7B))
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT)           (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES)     || \
+                                                   ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+                                                   ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+
+/**
+  * @}
+  */
+
+/* Include CRC HAL Extended module */
+#include "stm32h7xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions ***********************************************/
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+  * @}
+  */
+
+/* Peripheral State and Error functions ***************************************/
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc_ex.h

@@ -0,0 +1,153 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_crc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRC HAL extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CRC_EX_H
+#define STM32H7xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes
+  * @{
+  */
+#define CRC_INPUTDATA_INVERSION_NONE               0x00000000U     /*!< No input data inversion            */
+#define CRC_INPUTDATA_INVERSION_BYTE               CRC_CR_REV_IN_0 /*!< Byte-wise input data inversion     */
+#define CRC_INPUTDATA_INVERSION_HALFWORD           CRC_CR_REV_IN_1 /*!< HalfWord-wise input data inversion */
+#define CRC_INPUTDATA_INVERSION_WORD               CRC_CR_REV_IN   /*!< Word-wise input data inversion     */
+/**
+  * @}
+  */
+
+/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes
+  * @{
+  */
+#define CRC_OUTPUTDATA_INVERSION_DISABLE         0x00000000U       /*!< No output data inversion       */
+#define CRC_OUTPUTDATA_INVERSION_ENABLE          CRC_CR_REV_OUT    /*!< Bit-wise output data inversion */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Set CRC output reversal
+  * @param  __HANDLE__ CRC handle
+  * @retval None
+  */
+#define  __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+  * @brief  Unset CRC output reversal
+  * @param  __HANDLE__ CRC handle
+  * @retval None
+  */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+/**
+  * @brief  Set CRC non-default polynomial
+  * @param  __HANDLE__ CRC handle
+  * @param  __POLYNOMIAL__ 7, 8, 16 or 32-bit polynomial
+  * @retval None
+  */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup CRCEx_Private_Macros CRC Extended Private Macros
+  * @{
+  */
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE)     (((MODE) == CRC_INPUTDATA_INVERSION_NONE)     || \
+                                                   ((MODE) == CRC_INPUTDATA_INVERSION_BYTE)     || \
+                                                   ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+                                                   ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE)    (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \
+                                                   ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLE))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup CRCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cryp.h

@@ -0,0 +1,556 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_cryp.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRYP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CRYP_H
+#define STM32H7xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+#if defined (CRYP)
+/** @addtogroup CRYP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+  * @{
+  */
+
+/**
+  * @brief CRYP Init Structure definition
+  */
+
+typedef struct
+{
+  uint32_t DataType;                   /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                                        This parameter can be a value of @ref CRYP_Data_Type */
+  uint32_t KeySize;                    /*!< Used only in AES mode : 128, 192 or 256 bit key length in CRYP1.
+                                            This parameter can be a value of @ref CRYP_Key_Size */
+  uint32_t *pKey;                      /*!< The key used for encryption/decryption */
+  uint32_t *pInitVect;                 /*!< The initialization vector used also as initialization
+                                         counter in CTR mode */
+  uint32_t Algorithm;                  /*!<  DES/ TDES Algorithm ECB/CBC
+                                        AES Algorithm ECB/CBC/CTR/GCM or CCM
+                                        This parameter can be a value of @ref CRYP_Algorithm_Mode */
+  uint32_t *Header;                    /*!< used only in AES GCM and CCM Algorithm for authentication,
+                                        GCM : also known as Additional Authentication Data
+                                        CCM : named B1 composed of the associated data length and Associated Data. */
+  uint32_t HeaderSize;                /*!< The size of header buffer in word  */
+  uint32_t *B0;                       /*!< B0 is first authentication block used only  in AES CCM mode */
+  uint32_t DataWidthUnit;             /*!< Data With Unit, this parameter can be value of @ref CRYP_Data_Width_Unit*/
+  uint32_t KeyIVConfigSkip;            /*!< CRYP peripheral Key and IV configuration skip, to configure Key and Initialization
+                                           Vector only once and to skip configuration for consecutive processing.
+                                           This parameter can be a value of @ref CRYP_Configuration_Skip */
+
+} CRYP_ConfigTypeDef;
+
+
+/**
+  * @brief  CRYP State Structure definition
+  */
+
+typedef enum
+{
+  HAL_CRYP_STATE_RESET             = 0x00U,  /*!< CRYP not yet initialized or disabled  */
+  HAL_CRYP_STATE_READY             = 0x01U,  /*!< CRYP initialized and ready for use    */
+  HAL_CRYP_STATE_BUSY              = 0x02U  /*!< CRYP BUSY, internal processing is ongoing  */
+} HAL_CRYP_STATETypeDef;
+
+
+/**
+  * @brief  CRYP handle Structure definition
+  */
+
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+typedef struct __CRYP_HandleTypeDef
+#else
+typedef struct
+#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */
+{
+
+  CRYP_TypeDef                      *Instance;            /*!< CRYP registers base address */
+
+  CRYP_ConfigTypeDef                Init;             /*!< CRYP required parameters */
+
+  uint32_t                          *pCrypInBuffPtr;  /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+  uint32_t                          *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+  __IO uint16_t                     CrypHeaderCount;   /*!< Counter of header data */
+
+  __IO uint16_t                     CrypInCount;      /*!< Counter of input data */
+
+  __IO uint16_t                     CrypOutCount;     /*!< Counter of output data */
+
+  uint16_t                          Size;           /*!< length of input data in word or in byte, according to DataWidthUnit */
+
+  uint32_t                          Phase;            /*!< CRYP peripheral phase */
+
+  DMA_HandleTypeDef                 *hdmain;          /*!< CRYP In DMA handle parameters */
+
+  DMA_HandleTypeDef                 *hdmaout;         /*!< CRYP Out DMA handle parameters */
+
+  HAL_LockTypeDef                   Lock;             /*!< CRYP locking object */
+
+  __IO  HAL_CRYP_STATETypeDef       State;            /*!< CRYP peripheral state */
+
+  __IO uint32_t                     ErrorCode;        /*!< CRYP peripheral error code */
+
+  uint32_t                          Version;          /*!< CRYP1 IP version*/
+
+  uint32_t                          KeyIVConfig;      /*!< CRYP peripheral Key and IV configuration flag, used when
+                                                           configuration can be skipped */
+
+  uint32_t                          SizesSum;         /*!< Sum of successive payloads lengths (in bytes), stored
+                                                           for a single signature computation after several
+                                                           messages processing */
+
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+  void (*InCpltCallback)(struct __CRYP_HandleTypeDef *hcryp);      /*!< CRYP Input FIFO transfer completed callback  */
+  void (*OutCpltCallback)(struct __CRYP_HandleTypeDef *hcryp);     /*!< CRYP Output FIFO transfer completed callback */
+  void (*ErrorCallback)(struct __CRYP_HandleTypeDef *hcryp);       /*!< CRYP Error callback */
+
+  void (* MspInitCallback)(struct __CRYP_HandleTypeDef *hcryp);    /*!< CRYP Msp Init callback  */
+  void (* MspDeInitCallback)(struct __CRYP_HandleTypeDef *hcryp);  /*!< CRYP Msp DeInit callback  */
+
+#endif /* (USE_HAL_CRYP_REGISTER_CALLBACKS) */
+
+} CRYP_HandleTypeDef;
+
+
+/**
+  * @}
+  */
+
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+/** @defgroup HAL_CRYP_Callback_ID_enumeration_definition HAL CRYP Callback ID enumeration definition
+  * @brief  HAL CRYP Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_CRYP_INPUT_COMPLETE_CB_ID    = 0x01U,    /*!< CRYP Input FIFO transfer completed callback ID */
+  HAL_CRYP_OUTPUT_COMPLETE_CB_ID   = 0x02U,    /*!< CRYP Output FIFO transfer completed callback ID */
+  HAL_CRYP_ERROR_CB_ID             = 0x03U,    /*!< CRYP Error callback ID           */
+
+  HAL_CRYP_MSPINIT_CB_ID        = 0x04U,    /*!< CRYP MspInit callback ID         */
+  HAL_CRYP_MSPDEINIT_CB_ID      = 0x05U     /*!< CRYP MspDeInit callback ID       */
+
+} HAL_CRYP_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRYP_Callback_pointer_definition HAL CRYP Callback pointer definition
+  * @brief  HAL CRYP Callback pointer definition
+  * @{
+  */
+
+typedef  void (*pCRYP_CallbackTypeDef)(CRYP_HandleTypeDef *hcryp);    /*!< pointer to a common CRYP callback function */
+
+/**
+  * @}
+  */
+
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYP_Error_Definition   CRYP Error Definition
+  * @{
+  */
+#define HAL_CRYP_ERROR_NONE              0x00000000U  /*!< No error        */
+#define HAL_CRYP_ERROR_WRITE             0x00000001U  /*!< Write error     */
+#define HAL_CRYP_ERROR_READ              0x00000002U  /*!< Read error      */
+#define HAL_CRYP_ERROR_DMA               0x00000004U  /*!< DMA error       */
+#define HAL_CRYP_ERROR_BUSY              0x00000008U  /*!< Busy flag error */
+#define HAL_CRYP_ERROR_TIMEOUT           0x00000010U  /*!< Timeout error */
+#define HAL_CRYP_ERROR_NOT_SUPPORTED     0x00000020U  /*!< Not supported mode */
+#define HAL_CRYP_ERROR_AUTH_TAG_SEQUENCE 0x00000040U  /*!< Sequence are not respected only for GCM or CCM */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+#define  HAL_CRYP_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup CRYP_Data_Width_Unit CRYP Data Width Unit
+  * @{
+  */
+
+#define CRYP_DATAWIDTHUNIT_WORD   0x00000000U  /*!< By default, size unit is word */
+#define CRYP_DATAWIDTHUNIT_BYTE   0x00000001U  /*!< By default, size unit is word */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Algorithm_Mode CRYP Algorithm Mode
+  * @{
+  */
+
+#define CRYP_DES_ECB     CRYP_CR_ALGOMODE_DES_ECB
+#define CRYP_DES_CBC     CRYP_CR_ALGOMODE_DES_CBC
+#define CRYP_TDES_ECB    CRYP_CR_ALGOMODE_TDES_ECB
+#define CRYP_TDES_CBC    CRYP_CR_ALGOMODE_TDES_CBC
+#define CRYP_AES_ECB     CRYP_CR_ALGOMODE_AES_ECB
+#define CRYP_AES_CBC     CRYP_CR_ALGOMODE_AES_CBC
+#define CRYP_AES_CTR     CRYP_CR_ALGOMODE_AES_CTR
+#define CRYP_AES_GCM     CRYP_CR_ALGOMODE_AES_GCM
+#define CRYP_AES_CCM     CRYP_CR_ALGOMODE_AES_CCM
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Key_Size CRYP Key Size
+  * @{
+  */
+
+#define CRYP_KEYSIZE_128B         0x00000000U
+#define CRYP_KEYSIZE_192B         CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B         CRYP_CR_KEYSIZE_1
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Data_Type CRYP Data Type
+  * @{
+  */
+
+#define CRYP_DATATYPE_32B         0x00000000U
+#define CRYP_DATATYPE_16B         CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B          CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B          CRYP_CR_DATATYPE
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Interrupt  CRYP Interrupt
+  * @{
+  */
+
+#define CRYP_IT_INI       CRYP_IMSCR_INIM   /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI      CRYP_IMSCR_OUTIM  /*!< Output FIFO Interrupt */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Flags CRYP Flags
+  * @{
+  */
+
+/* Flags in the SR register */
+#define CRYP_FLAG_IFEM    CRYP_SR_IFEM  /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF    CRYP_SR_IFNF  /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE    CRYP_SR_OFNE  /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU    CRYP_SR_OFFU  /*!< Output FIFO is Full */
+#define CRYP_FLAG_BUSY    CRYP_SR_BUSY  /*!< The CRYP core is currently processing a block of data
+                                             or a key preparation (for AES decryption). */
+/* Flags in the RISR register */
+#define CRYP_FLAG_OUTRIS  0x01000002U  /*!< Output FIFO service raw interrupt status */
+#define CRYP_FLAG_INRIS   0x01000001U  /*!< Input FIFO service raw interrupt status*/
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Configuration_Skip CRYP Key and IV Configuration Skip Mode
+  * @{
+  */
+
+#define CRYP_KEYIVCONFIG_ALWAYS        0x00000000U            /*!< Peripheral Key and IV configuration to do systematically */
+#define CRYP_KEYIVCONFIG_ONCE          0x00000001U            /*!< Peripheral Key and IV configuration to do only once      */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+
+/** @brief Reset CRYP handle state
+  * @param  __HANDLE__ specifies the CRYP handle.
+  * @retval None
+  */
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) do{\
+                                                      (__HANDLE__)->State = HAL_CRYP_STATE_RESET;\
+                                                      (__HANDLE__)->MspInitCallback = NULL;\
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;\
+                                                     }while(0)
+#else
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable/Disable the CRYP peripheral.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+
+#define __HAL_CRYP_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &=  ~CRYP_CR_CRYPEN)
+
+/** @brief  Check whether the specified CRYP status flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values for CRYP:
+  *            @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+  *                                 or a key preparation (for AES decryption).
+  *            @arg CRYP_FLAG_IFEM: Input FIFO is empty
+  *            @arg CRYP_FLAG_IFNF: Input FIFO is not full
+  *            @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+  *            @arg CRYP_FLAG_OFFU: Output FIFO is full
+  *            @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+  * @retval The state of __FLAG__ (TRUE or FALSE).
+  */
+#define CRYP_FLAG_MASK  0x0000001FU
+
+#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01U)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+                                                   ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief  Check whether the specified CRYP interrupt is set or not.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: specifies the interrupt to check.
+  *         This parameter can be one of the following values for CRYP:
+  *            @arg CRYP_IT_INI: Input FIFO service masked interrupt status
+  *            @arg CRYP_IT_OUTI: Output FIFO service masked interrupt status
+  * @retval The state of __INTERRUPT__ (TRUE or FALSE).
+  */
+
+#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Enable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  *         This parameter can be one of the following values for CRYP:
+  *            @ CRYP_IT_INI : Input FIFO service interrupt mask.
+  *            @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
+  * @retval None
+  */
+
+#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  *         This parameter can be one of the following values for CRYP:
+  *            @ CRYP_IT_INI : Input FIFO service interrupt mask.
+  *            @ CRYP_IT_OUTI : Output FIFO service interrupt mask.CRYP interrupt.
+  * @retval None
+  */
+
+#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Include CRYP HAL Extended module */
+#include "stm32h7xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_SetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf);
+HAL_StatusTypeDef HAL_CRYP_GetConfig(CRYP_HandleTypeDef *hcryp, CRYP_ConfigTypeDef *pConf);
+#if (USE_HAL_CRYP_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_CRYP_RegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID,
+                                            pCRYP_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_CRYP_UnRegisterCallback(CRYP_HandleTypeDef *hcryp, HAL_CRYP_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_CRYP_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+  * @{
+  */
+
+/* encryption/decryption ***********************************/
+HAL_StatusTypeDef HAL_CRYP_Encrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output,
+                                   uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_Decrypt(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output,
+                                   uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
+HAL_StatusTypeDef HAL_CRYP_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
+HAL_StatusTypeDef HAL_CRYP_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
+HAL_StatusTypeDef HAL_CRYP_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint32_t *Input, uint16_t Size, uint32_t *Output);
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+  * @{
+  */
+/* Interrupt Handler functions  **********************************************/
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+uint32_t HAL_CRYP_GetError(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup CRYP_Private_Macros   CRYP Private Macros
+  * @{
+  */
+
+/** @defgroup CRYP_IS_CRYP_Definitions CRYP Private macros to check input parameters
+  * @{
+  */
+
+#define IS_CRYP_ALGORITHM(ALGORITHM) (((ALGORITHM) == CRYP_DES_ECB)   || \
+                                      ((ALGORITHM)  == CRYP_DES_CBC)   || \
+                                      ((ALGORITHM)  == CRYP_TDES_ECB)  || \
+                                      ((ALGORITHM)  == CRYP_TDES_CBC)  || \
+                                      ((ALGORITHM)  == CRYP_AES_ECB)   || \
+                                      ((ALGORITHM)  == CRYP_AES_CBC)   || \
+                                      ((ALGORITHM)  == CRYP_AES_CTR)   || \
+                                      ((ALGORITHM)  == CRYP_AES_GCM)   || \
+                                      ((ALGORITHM)  == CRYP_AES_CCM))
+
+#define IS_CRYP_KEYSIZE(KEYSIZE)(((KEYSIZE) == CRYP_KEYSIZE_128B)   || \
+                                 ((KEYSIZE) == CRYP_KEYSIZE_192B)   || \
+                                 ((KEYSIZE) == CRYP_KEYSIZE_256B))
+
+#define IS_CRYP_DATATYPE(DATATYPE)(((DATATYPE) == CRYP_DATATYPE_32B)   || \
+                                   ((DATATYPE) == CRYP_DATATYPE_16B) || \
+                                   ((DATATYPE) == CRYP_DATATYPE_8B) || \
+                                   ((DATATYPE) == CRYP_DATATYPE_1B))
+
+#define IS_CRYP_INIT(CONFIG)(((CONFIG) == CRYP_KEYIVCONFIG_ALWAYS) || \
+                             ((CONFIG) == CRYP_KEYIVCONFIG_ONCE))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Constants CRYP Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup CRYP_Private_Defines CRYP Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Variables CRYP Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup CRYP_Private_Functions_Prototypes CRYP Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+#endif /* CRYP */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cryp_ex.h

@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_cryp_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of CRYP HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_CRYP_EX_H
+#define STM32H7xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+#if defined (CRYP)
+/** @addtogroup CRYPEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Types CRYPEx Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros
+  * @{
+  */
+
+/**
+  * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_GenerateAuthTAG(CRYP_HandleTypeDef *hcryp, uint32_t *AuthTag, uint32_t Timeout);
+
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* CRYP */
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac.h

@@ -0,0 +1,546 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dac.h
+  * @author  MCD Application Team
+  * @brief   Header file of DAC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DAC_H
+#define STM32H7xx_HAL_DAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined(DAC1) || defined(DAC2)
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Types DAC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_DAC_STATE_RESET             = 0x00U,  /*!< DAC not yet initialized or disabled  */
+  HAL_DAC_STATE_READY             = 0x01U,  /*!< DAC initialized and ready for use    */
+  HAL_DAC_STATE_BUSY              = 0x02U,  /*!< DAC internal processing is ongoing   */
+  HAL_DAC_STATE_TIMEOUT           = 0x03U,  /*!< DAC timeout state                    */
+  HAL_DAC_STATE_ERROR             = 0x04U   /*!< DAC error state                      */
+
+} HAL_DAC_StateTypeDef;
+
+/**
+  * @brief  DAC handle Structure definition
+  */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+typedef struct __DAC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+{
+  DAC_TypeDef                 *Instance;     /*!< Register base address             */
+
+  __IO HAL_DAC_StateTypeDef   State;         /*!< DAC communication state           */
+
+  HAL_LockTypeDef             Lock;          /*!< DAC locking object                */
+
+  DMA_HandleTypeDef           *DMA_Handle1;  /*!< Pointer DMA handler for channel 1 */
+
+  DMA_HandleTypeDef           *DMA_Handle2;  /*!< Pointer DMA handler for channel 2 */
+
+  __IO uint32_t               ErrorCode;     /*!< DAC Error code                    */
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+  void (* ConvCpltCallbackCh1)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh1)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh1)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh1)         (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvCpltCallbackCh2)            (struct __DAC_HandleTypeDef *hdac);
+  void (* ConvHalfCpltCallbackCh2)        (struct __DAC_HandleTypeDef *hdac);
+  void (* ErrorCallbackCh2)               (struct __DAC_HandleTypeDef *hdac);
+  void (* DMAUnderrunCallbackCh2)         (struct __DAC_HandleTypeDef *hdac);
+
+  void (* MspInitCallback)                (struct __DAC_HandleTypeDef *hdac);
+  void (* MspDeInitCallback )             (struct __DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+} DAC_HandleTypeDef;
+
+/**
+  * @brief   DAC Configuration sample and hold Channel structure definition
+  */
+typedef struct
+{
+  uint32_t DAC_SampleTime ;          /*!< Specifies the Sample time for the selected channel.
+                                          This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE.
+                                          This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */
+
+  uint32_t DAC_HoldTime ;            /*!< Specifies the hold time for the selected channel
+                                          This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE.
+                                          This parameter must be a number between Min_Data = 0 and Max_Data = 1023 */
+
+  uint32_t DAC_RefreshTime ;         /*!< Specifies the refresh time for the selected channel
+                                          This parameter applies when DAC_SampleAndHold is DAC_SAMPLEANDHOLD_ENABLE.
+                                          This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
+} DAC_SampleAndHoldConfTypeDef;
+
+/**
+  * @brief   DAC Configuration regular Channel structure definition
+  */
+typedef struct
+{
+  uint32_t DAC_SampleAndHold;            /*!< Specifies whether the DAC mode.
+                                              This parameter can be a value of @ref DAC_SampleAndHold */
+
+  uint32_t DAC_Trigger;                  /*!< Specifies the external trigger for the selected DAC channel.
+                                              This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_OutputBuffer;             /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                               This parameter can be a value of @ref DAC_output_buffer */
+
+  uint32_t DAC_ConnectOnChipPeripheral ; /*!< Specifies whether the DAC output is connected or not to on chip peripheral .
+                                              This parameter can be a value of @ref DAC_ConnectOnChipPeripheral */
+
+  uint32_t DAC_UserTrimming;             /*!< Specifies the trimming mode
+                                              This parameter must be a value of @ref DAC_UserTrimming
+                                              DAC_UserTrimming is either factory or user trimming */
+
+  uint32_t DAC_TrimmingValue;             /*!< Specifies the offset trimming value
+                                               i.e. when DAC_SampleAndHold is DAC_TRIMMING_USER.
+                                               This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+  DAC_SampleAndHoldConfTypeDef  DAC_SampleAndHoldConfig;  /*!< Sample and Hold settings */
+
+} DAC_ChannelConfTypeDef;
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL DAC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DAC_CH1_COMPLETE_CB_ID                 = 0x00U,  /*!< DAC CH1 Complete Callback ID      */
+  HAL_DAC_CH1_HALF_COMPLETE_CB_ID            = 0x01U,  /*!< DAC CH1 half Complete Callback ID */
+  HAL_DAC_CH1_ERROR_ID                       = 0x02U,  /*!< DAC CH1 error Callback ID         */
+  HAL_DAC_CH1_UNDERRUN_CB_ID                 = 0x03U,  /*!< DAC CH1 underrun Callback ID      */
+  HAL_DAC_CH2_COMPLETE_CB_ID                 = 0x04U,  /*!< DAC CH2 Complete Callback ID      */
+  HAL_DAC_CH2_HALF_COMPLETE_CB_ID            = 0x05U,  /*!< DAC CH2 half Complete Callback ID */
+  HAL_DAC_CH2_ERROR_ID                       = 0x06U,  /*!< DAC CH2 error Callback ID         */
+  HAL_DAC_CH2_UNDERRUN_CB_ID                 = 0x07U,  /*!< DAC CH2 underrun Callback ID      */
+  HAL_DAC_MSPINIT_CB_ID                      = 0x08U,  /*!< DAC MspInit Callback ID           */
+  HAL_DAC_MSPDEINIT_CB_ID                    = 0x09U,  /*!< DAC MspDeInit Callback ID         */
+  HAL_DAC_ALL_CB_ID                          = 0x0AU   /*!< DAC All ID                        */
+} HAL_DAC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL DAC Callback pointer definition
+  */
+typedef void (*pDAC_CallbackTypeDef)(DAC_HandleTypeDef *hdac);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+  * @{
+  */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+  * @{
+  */
+#define  HAL_DAC_ERROR_NONE              0x00U    /*!< No error                          */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH1    0x01U    /*!< DAC channel1 DMA underrun error   */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH2    0x02U    /*!< DAC channel2 DMA underrun error   */
+#define  HAL_DAC_ERROR_DMA               0x04U    /*!< DMA error                         */
+#define  HAL_DAC_ERROR_TIMEOUT           0x08U    /*!< Timeout error                     */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define HAL_DAC_ERROR_INVALID_CALLBACK   0x10U    /*!< Invalid callback error            */
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_trigger_selection DAC trigger selection
+  * @{
+  */
+#define DAC_TRIGGER_NONE                0x00000000U                                                                       /*!< Conversion is automatic once the DAC_DHRxxxx register has been loaded, and not by external trigger */
+#define DAC_TRIGGER_SOFTWARE            (                                                                    DAC_CR_TEN1) /*!< Conversion started by software trigger for DAC channel */
+#define DAC_TRIGGER_T1_TRGO             (                                                   DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM1 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO             (                                  DAC_CR_TSEL1_1                  | DAC_CR_TEN1) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO             (                                  DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO             (                 DAC_CR_TSEL1_2                                   | DAC_CR_TEN1) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO             (                 DAC_CR_TSEL1_2                  | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO             (                 DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1                  | DAC_CR_TEN1) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO             (                 DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO            (DAC_CR_TSEL1_3                                                    | DAC_CR_TEN1) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#if defined(HRTIM1)
+#define DAC_TRIGGER_HR1_TRGO1           (DAC_CR_TSEL1_3                                   | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< HR1 TRGO1 selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_HR1_TRGO2           (DAC_CR_TSEL1_3                  | DAC_CR_TSEL1_1                  | DAC_CR_TEN1) /*!< HR1 TRGO2 selected as external conversion trigger for DAC channel */
+#endif
+#define DAC_TRIGGER_LPTIM1_OUT          (DAC_CR_TSEL1_3                  | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< LPTIM1 OUT TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_LPTIM2_OUT          (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2                                   | DAC_CR_TEN1) /*!< LPTIM2 OUT TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9             (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2                  | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#if defined(TIM23)
+#define DAC_TRIGGER_T23_TRGO            (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1                  | DAC_CR_TEN1) /*!< TIM23 TRGO selected as external conversion trigger for DAC channel */
+#endif
+#if defined(TIM24)
+#define DAC_TRIGGER_T24_TRGO            (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1) /*!< TIM24 TRGO selected as external conversion trigger for DAC channel */
+#endif
+#if defined(DAC2)
+#define DAC_TRIGGER_LPTIM3_OUT          (DAC_CR_TSEL1_3 | DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1                  | DAC_CR_TEN1) /*!< LPTIM3 OUT TRGO selected as external conversion trigger for DAC channel */
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+  * @{
+  */
+#define DAC_OUTPUTBUFFER_ENABLE            0x00000000U
+#define DAC_OUTPUTBUFFER_DISABLE           (DAC_MCR_MODE1_1)
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection DAC Channel selection
+  * @{
+  */
+#define DAC_CHANNEL_1                      0x00000000U
+#define DAC_CHANNEL_2                      0x00000010U
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment DAC data alignment
+  * @{
+  */
+#define DAC_ALIGN_12B_R                    0x00000000U
+#define DAC_ALIGN_12B_L                    0x00000004U
+#define DAC_ALIGN_8B_R                     0x00000008U
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+  * @{
+  */
+#define DAC_FLAG_DMAUDR1                   (DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2                   (DAC_SR_DMAUDR2)
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_IT_definition  DAC IT definition
+  * @{
+  */
+#define DAC_IT_DMAUDR1                   (DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2                   (DAC_SR_DMAUDR2)
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_ConnectOnChipPeripheral DAC ConnectOnChipPeripheral
+  * @{
+  */
+#define DAC_CHIPCONNECT_EXTERNAL       (1UL << 0)
+#define DAC_CHIPCONNECT_INTERNAL       (1UL << 1)
+#define DAC_CHIPCONNECT_BOTH           (1UL << 2)
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_UserTrimming DAC User Trimming
+  * @{
+  */
+#define DAC_TRIMMING_FACTORY        (0x00000000UL)        /*!< Factory trimming */
+#define DAC_TRIMMING_USER           (0x00000001UL)        /*!< User trimming */
+/**
+  * @}
+  */
+
+/** @defgroup DAC_SampleAndHold DAC power mode
+  * @{
+  */
+#define DAC_SAMPLEANDHOLD_DISABLE     (0x00000000UL)
+#define DAC_SAMPLEANDHOLD_ENABLE      (DAC_MCR_MODE1_2)
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+  * @{
+  */
+
+/** @brief Reset DAC handle state.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @retval None
+  */
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) do {                                                        \
+                                                      (__HANDLE__)->State             = HAL_DAC_STATE_RESET; \
+                                                      (__HANDLE__)->MspInitCallback   = NULL;                \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;                \
+                                                     } while(0)
+#else
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/** @brief Enable the DAC channel.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __DAC_Channel__ specifies the DAC channel
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+  ((__HANDLE__)->Instance->CR |=  (DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
+
+/** @brief Disable the DAC channel.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __DAC_Channel__ specifies the DAC channel.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+  ((__HANDLE__)->Instance->CR &=  ~(DAC_CR_EN1 << ((__DAC_Channel__) & 0x10UL)))
+
+/** @brief Set DHR12R1 alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (0x00000008UL + (__ALIGNMENT__))
+
+/** @brief  Set DHR12R2 alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (0x00000014UL + (__ALIGNMENT__))
+
+/** @brief  Set DHR12RD alignment.
+  * @param  __ALIGNMENT__ specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (0x00000020UL + (__ALIGNMENT__))
+
+/** @brief Enable the DAC interrupt.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __INTERRUPT__ specifies the DAC interrupt.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt.
+  * @param  __HANDLE__ specifies the DAC handle
+  * @param  __INTERRUPT__ specifies the DAC interrupt.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief  Check whether the specified DAC interrupt source is enabled or not.
+  * @param __HANDLE__ DAC handle
+  * @param __INTERRUPT__ DAC interrupt source to check
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1 DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2 DAC channel 2 DMA underrun interrupt
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief  Get the selected DAC's flag status.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __FLAG__ specifies the DAC flag to get.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+  *            @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
+  * @retval None
+  */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the DAC's flag.
+  * @param  __HANDLE__ specifies the DAC handle.
+  * @param  __FLAG__ specifies the DAC flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1 DAC channel 1 DMA underrun flag
+  *            @arg DAC_FLAG_DMAUDR2 DAC channel 2 DMA underrun flag
+  * @retval None
+  */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DAC_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+                                           ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+                                 ((CHANNEL) == DAC_CHANNEL_2))
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+                             ((ALIGN) == DAC_ALIGN_12B_L) || \
+                             ((ALIGN) == DAC_ALIGN_8B_R))
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0UL)
+
+#define IS_DAC_REFRESHTIME(TIME)   ((TIME) <= 0x000000FFUL)
+
+/**
+  * @}
+  */
+
+/* Include DAC HAL Extended module */
+#include "stm32h7xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DAC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef *hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef *hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef *hdac);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
+                                    uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+#if (USE_HAL_DAC_REGISTER_CALLBACKS == 1)
+/* DAC callback registering/unregistering */
+HAL_StatusTypeDef     HAL_DAC_RegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID,
+                                               pDAC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef     HAL_DAC_UnRegisterCallback(DAC_HandleTypeDef *hdac, HAL_DAC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_DAC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef *hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Functions DAC Private Functions
+  * @{
+  */
+void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DAC1 || DAC2 */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /*STM32H7xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac_ex.h

@@ -0,0 +1,273 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dac_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DAC HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DAC_EX_H
+#define STM32H7xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined(DAC1) || defined(DAC2)
+
+/** @addtogroup DACEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL State structures definition
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
+  * @{
+  */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangle amplitude
+  * @{
+  */
+#define DAC_LFSRUNMASK_BIT0                0x00000000UL                                                        /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0             (                                                   DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0             (                                  DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0             (                                  DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0             (                 DAC_CR_MAMP1_2                                  ) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0             (                 DAC_CR_MAMP1_2                  | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0             (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0             (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0             (DAC_CR_MAMP1_3                                                   ) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0             (DAC_CR_MAMP1_3                                   | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0            (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1                 ) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0            (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1            0x00000000UL                                                        /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3            (                                                   DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7            (                                  DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15           (                                  DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31           (                 DAC_CR_MAMP1_2                                  ) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63           (                 DAC_CR_MAMP1_2                  | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127          (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255          (                 DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511          (DAC_CR_MAMP1_3                                                   ) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023         (DAC_CR_MAMP1_3                                   | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047         (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1                 ) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095         (DAC_CR_MAMP1_3                  | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DACEx_Private_Macros DACEx Private Macros
+  * @{
+  */
+#if defined(HRTIM1)
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)       || \
+                                 ((TRIGGER) == DAC_TRIGGER_T1_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T15_TRGO)   || \
+                                 ((TRIGGER) == DAC_TRIGGER_HR1_TRGO1)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_HR1_TRGO2)  || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM1_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM2_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#elif defined(DAC2)
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)       || \
+                                 ((TRIGGER) == DAC_TRIGGER_T1_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T15_TRGO)   || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM1_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM2_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM3_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#else
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE)       || \
+                                 ((TRIGGER) == DAC_TRIGGER_T1_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T15_TRGO)   || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM1_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_LPTIM2_OUT) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9)    || \
+                                 ((TRIGGER) == DAC_TRIGGER_T23_TRGO)   || \
+                                 ((TRIGGER) == DAC_TRIGGER_T24_TRGO)   || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif
+
+#define IS_DAC_SAMPLETIME(TIME) ((TIME) <= 0x000003FFU)
+
+#define IS_DAC_HOLDTIME(TIME)   ((TIME) <= 0x000003FFU)
+
+#define IS_DAC_SAMPLEANDHOLD(MODE) (((MODE) == DAC_SAMPLEANDHOLD_DISABLE) || \
+                                    ((MODE) == DAC_SAMPLEANDHOLD_ENABLE))
+
+#define IS_DAC_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU)
+
+#define IS_DAC_NEWTRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU)
+
+#define IS_DAC_CHIP_CONNECTION(CONNECT) (((CONNECT) == DAC_CHIPCONNECT_EXTERNAL) || \
+                                         ((CONNECT) == DAC_CHIPCONNECT_INTERNAL) || \
+                                         ((CONNECT) == DAC_CHIPCONNECT_BOTH))
+
+#define IS_DAC_TRIMMING(TRIMMING) (((TRIMMING) == DAC_TRIMMING_FACTORY) || \
+                                   ((TRIMMING) == DAC_TRIMMING_USER))
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/* Extended features functions ***********************************************/
+
+/** @addtogroup DACEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DACEx_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t Amplitude);
+
+HAL_StatusTypeDef HAL_DACEx_DualStart(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DACEx_DualStop(DAC_HandleTypeDef *hdac);
+HAL_StatusTypeDef HAL_DACEx_DualStart_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel, uint32_t *pData, uint32_t Length,
+                                          uint32_t Alignment);
+HAL_StatusTypeDef HAL_DACEx_DualStop_DMA(DAC_HandleTypeDef *hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef *hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef *hdac);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac);
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup DACEx_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+
+HAL_StatusTypeDef HAL_DACEx_SelfCalibrate(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DACEx_SetUserTrimming(DAC_HandleTypeDef *hdac, DAC_ChannelConfTypeDef *sConfig, uint32_t Channel,
+                                            uint32_t NewTrimmingValue);
+uint32_t HAL_DACEx_GetTrimOffset(DAC_HandleTypeDef *hdac, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DACEx_Private_Functions
+  * @{
+  */
+
+/* DAC_DMAConvCpltCh2 / DAC_DMAErrorCh2 / DAC_DMAHalfConvCpltCh2 */
+/* are called by HAL_DAC_Start_DMA */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DAC1 || DAC2 */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*STM32H7xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dcmi.h

@@ -0,0 +1,671 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dcmi.h
+  * @author  MCD Application Team
+  * @brief   Header file of DCMI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DCMI_H
+#define STM32H7xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (DCMI)
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Types DCMI Exported Types
+  * @{
+  */
+/**
+  * @brief  HAL DCMI State structures definition
+  */
+typedef enum
+{
+  HAL_DCMI_STATE_RESET             = 0x00U,  /*!< DCMI not yet initialized or disabled  */
+  HAL_DCMI_STATE_READY             = 0x01U,  /*!< DCMI initialized and ready for use    */
+  HAL_DCMI_STATE_BUSY              = 0x02U,  /*!< DCMI internal processing is ongoing   */
+  HAL_DCMI_STATE_TIMEOUT           = 0x03U,  /*!< DCMI timeout state                    */
+  HAL_DCMI_STATE_ERROR             = 0x04U,  /*!< DCMI error state                      */
+  HAL_DCMI_STATE_SUSPENDED         = 0x05U   /*!< DCMI suspend state                    */
+} HAL_DCMI_StateTypeDef;
+
+/**
+  * @brief   DCMI Embedded Synchronisation CODE Init structure definition
+  */
+typedef struct
+{
+  uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+  uint8_t LineStartCode;  /*!< Specifies the code of the line start delimiter.  */
+  uint8_t LineEndCode;    /*!< Specifies the code of the line end delimiter.    */
+  uint8_t FrameEndCode;   /*!< Specifies the code of the frame end delimiter.   */
+} DCMI_CodesInitTypeDef;
+
+/**
+  * @brief   DCMI Embedded Synchronisation UNMASK Init structure definition
+  */
+typedef struct
+{
+  uint8_t FrameStartUnmask; /*!< Specifies the frame start delimiter unmask. */
+  uint8_t LineStartUnmask;  /*!< Specifies the line start delimiter unmask.  */
+  uint8_t LineEndUnmask;    /*!< Specifies the line end delimiter unmask.    */
+  uint8_t FrameEndUnmask;   /*!< Specifies the frame end delimiter unmask.   */
+} DCMI_SyncUnmaskTypeDef;
+/**
+  * @brief   DCMI Init structure definition
+  */
+typedef struct
+{
+  uint32_t  SynchroMode;                /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+                                             This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+  uint32_t  PCKPolarity;                /*!< Specifies the Pixel clock polarity: Falling or Rising.
+                                             This parameter can be a value of @ref DCMI_PIXCK_Polarity       */
+
+  uint32_t  VSPolarity;                 /*!< Specifies the Vertical synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_VSYNC_Polarity       */
+
+  uint32_t  HSPolarity;                 /*!< Specifies the Horizontal synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_HSYNC_Polarity       */
+
+  uint32_t  CaptureRate;                /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+                                             This parameter can be a value of @ref DCMI_Capture_Rate         */
+
+  uint32_t  ExtendedDataMode;           /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+                                             This parameter can be a value of @ref DCMI_Extended_Data_Mode   */
+
+  DCMI_CodesInitTypeDef SyncroCode;     /*!< Specifies the code of the line/frame start delimiter and the
+                                             line/frame end delimiter */
+
+  uint32_t JPEGMode;                    /*!< Enable or Disable the JPEG mode.
+                                             This parameter can be a value of @ref DCMI_MODE_JPEG            */
+
+  uint32_t ByteSelectMode;              /*!< Specifies the data to be captured by the interface
+                                            This parameter can be a value of @ref DCMI_Byte_Select_Mode      */
+
+  uint32_t ByteSelectStart;             /*!< Specifies if the data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMI_Byte_Select_Start     */
+
+  uint32_t LineSelectMode;              /*!< Specifies the line of data to be captured by the interface
+                                            This parameter can be a value of @ref DCMI_Line_Select_Mode      */
+
+  uint32_t LineSelectStart;             /*!< Specifies if the line of data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMI_Line_Select_Start     */
+} DCMI_InitTypeDef;
+
+/**
+  * @brief  DCMI handle Structure definition
+  */
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+typedef struct  __DCMI_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+{
+  DCMI_TypeDef                  *Instance;           /*!< DCMI Register base address   */
+
+  DCMI_InitTypeDef              Init;                /*!< DCMI parameters              */
+
+  HAL_LockTypeDef               Lock;                /*!< DCMI locking object          */
+
+  __IO HAL_DCMI_StateTypeDef    State;               /*!< DCMI state                   */
+
+  __IO uint32_t                 XferCount;           /*!< DMA transfer counter         */
+
+  __IO uint32_t                 XferSize;            /*!< DMA transfer size            */
+
+  uint32_t                      XferTransferNumber;  /*!< DMA transfer number          */
+
+  uint32_t                      pBuffPtr;            /*!< Pointer to DMA output buffer */
+
+  DMA_HandleTypeDef             *DMA_Handle;         /*!< Pointer to the DMA handler   */
+
+  __IO uint32_t                 ErrorCode;           /*!< DCMI Error code              */
+
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+  void (* FrameEventCallback)(struct __DCMI_HandleTypeDef *hdcmi);       /*!< DCMI Frame Event Callback */
+  void (* VsyncEventCallback)(struct __DCMI_HandleTypeDef *hdcmi);       /*!< DCMI Vsync Event Callback */
+  void (* LineEventCallback)(struct __DCMI_HandleTypeDef *hdcmi);        /*!< DCMI Line Event Callback  */
+  void (* ErrorCallback)(struct __DCMI_HandleTypeDef *hdcmi);            /*!< DCMI Error Callback       */
+  void (* MspInitCallback)(struct __DCMI_HandleTypeDef *hdcmi);          /*!< DCMI Msp Init callback    */
+  void (* MspDeInitCallback)(struct __DCMI_HandleTypeDef *hdcmi);        /*!< DCMI Msp DeInit callback  */
+#endif  /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+} DCMI_HandleTypeDef;
+
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL DCMI Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DCMI_FRAME_EVENT_CB_ID    = 0x00U,    /*!< DCMI Frame Event Callback ID */
+  HAL_DCMI_VSYNC_EVENT_CB_ID    = 0x01U,    /*!< DCMI Vsync Event Callback ID */
+  HAL_DCMI_LINE_EVENT_CB_ID     = 0x02U,    /*!< DCMI Line Event Callback ID  */
+  HAL_DCMI_ERROR_CB_ID          = 0x03U,    /*!< DCMI Error Callback ID       */
+  HAL_DCMI_MSPINIT_CB_ID        = 0x04U,    /*!< DCMI MspInit callback ID     */
+  HAL_DCMI_MSPDEINIT_CB_ID      = 0x05U     /*!< DCMI MspDeInit callback ID   */
+
+} HAL_DCMI_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL DCMI Callback pointer definition
+  */
+typedef  void (*pDCMI_CallbackTypeDef)(DCMI_HandleTypeDef * hdcmi); /*!< pointer to a DCMI callback function */
+
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
+  * @{
+  */
+
+/** @defgroup DCMI_Error_Code DCMI Error Code
+  * @{
+  */
+#define HAL_DCMI_ERROR_NONE             (0x00000000U)  /*!< No error              */
+#define HAL_DCMI_ERROR_OVR              (0x00000001U)  /*!< Overrun error         */
+#define HAL_DCMI_ERROR_SYNC             (0x00000002U)  /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT          (0x00000020U)  /*!< Timeout error         */
+#define HAL_DCMI_ERROR_DMA              (0x00000040U)  /*!< DMA error             */
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+#define  HAL_DCMI_ERROR_INVALID_CALLBACK (0x00000080U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
+  * @{
+  */
+#define DCMI_MODE_CONTINUOUS           (0x00000000U)  /*!< The received data are transferred continuously
+                                                                    into the destination memory through the DMA             */
+#define DCMI_MODE_SNAPSHOT             ((uint32_t)DCMI_CR_CM)  /*!< Once activated, the interface waits for the start of
+                                                                    frame and then transfers a single frame through the DMA */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
+  * @{
+  */
+#define DCMI_SYNCHRO_HARDWARE        (0x00000000U)   /*!< Hardware synchronization data capture (frame/line start/stop)
+                                                                   is synchronized with the HSYNC/VSYNC signals                  */
+#define DCMI_SYNCHRO_EMBEDDED        ((uint32_t)DCMI_CR_ESS)  /*!< Embedded synchronization data capture is synchronized with
+                                                                   synchronization codes embedded in the data flow               */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
+  * @{
+  */
+#define DCMI_PCKPOLARITY_FALLING    (0x00000000U)      /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING     ((uint32_t)DCMI_CR_PCKPOL)  /*!< Pixel clock active on Rising edge  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
+  * @{
+  */
+#define DCMI_VSPOLARITY_LOW     (0x00000000U)     /*!< Vertical synchronization active Low  */
+#define DCMI_VSPOLARITY_HIGH    ((uint32_t)DCMI_CR_VSPOL)  /*!< Vertical synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
+  * @{
+  */
+#define DCMI_HSPOLARITY_LOW     (0x00000000U)     /*!< Horizontal synchronization active Low  */
+#define DCMI_HSPOLARITY_HIGH    ((uint32_t)DCMI_CR_HSPOL)  /*!< Horizontal synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
+  * @{
+  */
+#define DCMI_JPEG_DISABLE   (0x00000000U)    /*!< Mode JPEG Disabled  */
+#define DCMI_JPEG_ENABLE    ((uint32_t)DCMI_CR_JPEG)  /*!< Mode JPEG Enabled   */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
+  * @{
+  */
+#define DCMI_CR_ALL_FRAME            (0x00000000U)      /*!< All frames are captured        */
+#define DCMI_CR_ALTERNATE_2_FRAME    ((uint32_t)DCMI_CR_FCRC_0)  /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME    ((uint32_t)DCMI_CR_FCRC_1)  /*!< One frame in 4 frames captured */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
+  * @{
+  */
+#define DCMI_EXTEND_DATA_8B     (0x00000000U)                       /*!< Interface captures 8-bit data on every pixel clock  */
+#define DCMI_EXTEND_DATA_10B    ((uint32_t)DCMI_CR_EDM_0)                    /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B    ((uint32_t)DCMI_CR_EDM_1)                    /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B    ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1))  /*!< Interface captures 14-bit data on every pixel clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
+  * @{
+  */
+#define DCMI_WINDOW_COORDINATE    (0x3FFFU)  /*!< Window coordinate */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Height DCMI Window Height
+  * @{
+  */
+#define DCMI_WINDOW_HEIGHT    (0x1FFFU)  /*!< Window Height */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_interrupt_sources  DCMI interrupt sources
+  * @{
+  */
+#define DCMI_IT_FRAME    ((uint32_t)DCMI_IER_FRAME_IE)    /*!< Capture complete interrupt      */
+#define DCMI_IT_OVR      ((uint32_t)DCMI_IER_OVR_IE)      /*!< Overrun interrupt               */
+#define DCMI_IT_ERR      ((uint32_t)DCMI_IER_ERR_IE)      /*!< Synchronization error interrupt */
+#define DCMI_IT_VSYNC    ((uint32_t)DCMI_IER_VSYNC_IE)    /*!< VSYNC interrupt                 */
+#define DCMI_IT_LINE     ((uint32_t)DCMI_IER_LINE_IE)     /*!< Line interrupt                  */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Flags DCMI Flags
+  * @{
+  */
+
+/**
+  * @brief   DCMI SR register
+  */
+#define DCMI_FLAG_HSYNC     ((uint32_t)DCMI_SR_INDEX|DCMI_SR_HSYNC) /*!< HSYNC pin state (active line / synchronization between lines)   */
+#define DCMI_FLAG_VSYNC     ((uint32_t)DCMI_SR_INDEX|DCMI_SR_VSYNC) /*!< VSYNC pin state (active frame / synchronization between frames) */
+#define DCMI_FLAG_FNE       ((uint32_t)DCMI_SR_INDEX|DCMI_SR_FNE)   /*!< FIFO not empty flag                                                 */
+/**
+  * @brief   DCMI RIS register
+  */
+#define DCMI_FLAG_FRAMERI    ((uint32_t)DCMI_RIS_FRAME_RIS)  /*!< Frame capture complete interrupt flag */
+#define DCMI_FLAG_OVRRI      ((uint32_t)DCMI_RIS_OVR_RIS)    /*!< Overrun interrupt flag                */
+#define DCMI_FLAG_ERRRI      ((uint32_t)DCMI_RIS_ERR_RIS)    /*!< Synchronization error interrupt flag  */
+#define DCMI_FLAG_VSYNCRI    ((uint32_t)DCMI_RIS_VSYNC_RIS)  /*!< VSYNC interrupt flag                  */
+#define DCMI_FLAG_LINERI     ((uint32_t)DCMI_RIS_LINE_RIS)   /*!< Line interrupt flag                   */
+/**
+  * @brief   DCMI MIS register
+  */
+#define DCMI_FLAG_FRAMEMI    ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_FRAME_MIS)  /*!< DCMI Frame capture complete masked interrupt status */
+#define DCMI_FLAG_OVRMI      ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_OVR_MIS  )  /*!< DCMI Overrun masked interrupt status                */
+#define DCMI_FLAG_ERRMI      ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_ERR_MIS  )  /*!< DCMI Synchronization error masked interrupt status  */
+#define DCMI_FLAG_VSYNCMI    ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_VSYNC_MIS)  /*!< DCMI VSYNC masked interrupt status                  */
+#define DCMI_FLAG_LINEMI     ((uint32_t)DCMI_MIS_INDEX|DCMI_MIS_LINE_MIS )  /*!< DCMI Line masked interrupt status                   */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Byte_Select_Mode DCMI Byte Select Mode
+  * @{
+  */
+#define DCMI_BSM_ALL                 (0x00000000U) /*!< Interface captures all received data */
+#define DCMI_BSM_OTHER               ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */
+#define DCMI_BSM_ALTERNATE_4         ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */
+#define DCMI_BSM_ALTERNATE_2         ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Byte_Select_Start DCMI Byte Select Start
+  * @{
+  */
+#define DCMI_OEBS_ODD               (0x00000000U) /*!< Interface captures first data from the frame/line start, second one being dropped */
+#define DCMI_OEBS_EVEN              ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Line_Select_Mode DCMI Line Select Mode
+  * @{
+  */
+#define DCMI_LSM_ALL                 (0x00000000U) /*!< Interface captures all received lines */
+#define DCMI_LSM_ALTERNATE_2         ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Line_Select_Start DCMI Line Select Start
+  * @{
+  */
+#define DCMI_OELS_ODD               (0x00000000U) /*!< Interface captures first line from the frame start, second one being dropped */
+#define DCMI_OELS_EVEN              ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
+  * @{
+  */
+
+/** @brief Reset DCMI handle state
+  * @param  __HANDLE__ specifies the DCMI handle.
+  * @retval None
+  */
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__)  do{                                             \
+                                                       (__HANDLE__)->State = HAL_DCMI_STATE_RESET; \
+                                                       (__HANDLE__)->MspInitCallback = NULL;       \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                     } while(0)
+#else
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the DCMI.
+  * @param  __HANDLE__ DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+  * @brief  Disable the DCMI.
+  * @param  __HANDLE__ DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DCMI pending flag.
+  * @param  __HANDLE__ DCMI handle
+  * @param  __FLAG__ Get the specified flag.
+  *         This parameter can be one of the following values (no combination allowed)
+  *            @arg DCMI_FLAG_HSYNC: HSYNC pin state (active line / synchronization between lines)
+  *            @arg DCMI_FLAG_VSYNC: VSYNC pin state (active frame / synchronization between frames)
+  *            @arg DCMI_FLAG_FNE: FIFO empty flag
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVRRI: Overrun flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  *            @arg DCMI_FLAG_FRAMEMI: DCMI Capture complete masked interrupt status
+  *            @arg DCMI_FLAG_OVRMI: DCMI Overrun masked interrupt status
+  *            @arg DCMI_FLAG_ERRMI: DCMI Synchronization error masked interrupt status
+  *            @arg DCMI_FLAG_VSYNCMI: DCMI VSYNC masked interrupt status
+  *            @arg DCMI_FLAG_LINEMI: DCMI Line masked interrupt status
+  * @retval The state of FLAG.
+  */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & (DCMI_SR_INDEX|DCMI_MIS_INDEX)) == 0x0)? ((__HANDLE__)->Instance->RIS & (__FLAG__)) :\
+ (((__FLAG__) & DCMI_SR_INDEX) == 0x0)? ((__HANDLE__)->Instance->MIS & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DCMI pending flags.
+  * @param  __HANDLE__ DCMI handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVFRI: Overflow flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  * @retval None
+  */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified DCMI interrupts.
+  * @param  __HANDLE__    DCMI handle
+  * @param  __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified DCMI interrupts.
+  * @param  __HANDLE__ DCMI handle
+  * @param  __INTERRUPT__ specifies the DCMI interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified DCMI interrupt has occurred or not.
+  * @param  __HANDLE__ DCMI handle
+  * @param  __INTERRUPT__ specifies the DCMI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval The state of INTERRUPT.
+  */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions
+  * @{
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_DCMI_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_DCMI_RegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID, pDCMI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_DCMI_UnRegisterCallback(DCMI_HandleTypeDef *hdcmi, HAL_DCMI_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_DCMI_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+HAL_StatusTypeDef HAL_DCMI_Suspend(DCMI_HandleTypeDef* hdcmi);
+HAL_StatusTypeDef HAL_DCMI_Resume(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef     HAL_DCMI_ConfigCrop(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef     HAL_DCMI_EnableCrop(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef     HAL_DCMI_DisableCrop(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef     HAL_DCMI_ConfigSyncUnmask(DCMI_HandleTypeDef *hdcmi, DCMI_SyncUnmaskTypeDef *SyncUnmask);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t              HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Constants DCMI Private Constants
+  * @{
+  */
+#define DCMI_MIS_INDEX        ((uint32_t)0x1000) /*!< DCMI MIS register index */
+#define DCMI_SR_INDEX         ((uint32_t)0x2000) /*!< DCMI SR register index  */
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMI_Private_Macros DCMI Private Macros
+  * @{
+  */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+                                   ((MODE) == DCMI_MODE_SNAPSHOT))
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+                              ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+                                      ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+                                     ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME)         || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B)  || \
+                                    ((DATA) == DCMI_EXTEND_DATA_10B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_12B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_14B))
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+
+#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \
+                                       ((MODE) == DCMI_BSM_OTHER) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_4) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_2))
+
+#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \
+                                            ((POLARITY) == DCMI_OEBS_EVEN))
+
+#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \
+                                       ((MODE) == DCMI_LSM_ALTERNATE_2))
+
+#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \
+                                            ((POLARITY) == DCMI_OELS_EVEN))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DCMI_Private_Functions DCMI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+#endif /* DCMI */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h

@@ -0,0 +1,188 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_def.h
+  * @author  MCD Application Team
+  * @brief   This file contains HAL common defines, enumeration, macros and
+  *          structures definitions.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DEF
+#define STM32H7xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx.h"
+#include "Legacy/stm32_hal_legacy.h"
+#include <stddef.h>
+#include <math.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+  * @brief  HAL Status structures definition
+  */
+typedef enum
+{
+  HAL_OK       = 0x00,
+  HAL_ERROR    = 0x01,
+  HAL_BUSY     = 0x02,
+  HAL_TIMEOUT  = 0x03
+} HAL_StatusTypeDef;
+
+/**
+  * @brief  HAL Lock structures definition
+  */
+typedef enum
+{
+  HAL_UNLOCKED = 0x00,
+  HAL_LOCKED   = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+
+#define HAL_MAX_DELAY      0xFFFFFFFFU
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) == (BIT))
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == 0U)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__: specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose: 
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro 
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function 
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+  #error " USE_RTOS should be 0 in the current HAL release "
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0)
+#endif /* USE_RTOS */
+
+#if  defined ( __GNUC__ )
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #ifndef __ALIGN_END
+    #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN
+    #if defined   (__CC_ARM)      /* ARM Compiler */
+      #define __ALIGN_BEGIN    __align(4)
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/* Macro to get variable aligned on 32-bytes,needed for cache maintenance purpose */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #define ALIGN_32BYTES(buf)  buf __attribute__ ((aligned (32)))                                    
+#elif defined (__ICCARM__)    /* IAR Compiler */
+  #define ALIGN_32BYTES(buf) _Pragma("data_alignment=32") buf  
+#elif defined   (__CC_ARM)      /* ARM Compiler */
+  #define ALIGN_32BYTES(buf) __align(32) buf  
+#endif
+
+/**
+  * @brief  __RAM_FUNC definition
+  */
+#if defined ( __CC_ARM   )
+/* ARM Compiler
+   ------------
+   RAM functions are defined using the toolchain options.
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const'
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog.
+*/
+#define __RAM_FUNC
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC __attribute__((section(".RamFunc")))
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm.h

@@ -0,0 +1,873 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dfsdm.h
+  * @author  MCD Application Team
+  * @brief   Header file of DFSDM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DFSDM_H
+#define STM32H7xx_HAL_DFSDM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DFSDM
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Types DFSDM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL DFSDM Channel states definition
+  */
+typedef enum
+{
+  HAL_DFSDM_CHANNEL_STATE_RESET = 0x00U, /*!< DFSDM channel not initialized */
+  HAL_DFSDM_CHANNEL_STATE_READY = 0x01U, /*!< DFSDM channel initialized and ready for use */
+  HAL_DFSDM_CHANNEL_STATE_ERROR = 0xFFU  /*!< DFSDM channel state error */
+} HAL_DFSDM_Channel_StateTypeDef;
+
+/**
+  * @brief  DFSDM channel output clock structure definition
+  */
+typedef struct
+{
+  FunctionalState Activation; /*!< Output clock enable/disable */
+  uint32_t        Selection;  /*!< Output clock is system clock or audio clock.
+                                   This parameter can be a value of @ref DFSDM_Channel_OuputClock */
+  uint32_t        Divider;    /*!< Output clock divider.
+                                   This parameter must be a number between Min_Data = 2 and Max_Data = 256 */
+} DFSDM_Channel_OutputClockTypeDef;
+
+/**
+  * @brief  DFSDM channel input structure definition
+  */
+typedef struct
+{
+  uint32_t Multiplexer; /*!< Input is external serial inputs, internal register or ADC output.
+                             This parameter can be a value of @ref DFSDM_Channel_InputMultiplexer */
+  uint32_t DataPacking; /*!< Standard, interleaved or dual mode for internal register.
+                             This parameter can be a value of @ref DFSDM_Channel_DataPacking */
+  uint32_t Pins;        /*!< Input pins are taken from same or following channel.
+                             This parameter can be a value of @ref DFSDM_Channel_InputPins */
+} DFSDM_Channel_InputTypeDef;
+
+/**
+  * @brief  DFSDM channel serial interface structure definition
+  */
+typedef struct
+{
+  uint32_t Type;     /*!< SPI or Manchester modes.
+                          This parameter can be a value of @ref DFSDM_Channel_SerialInterfaceType */
+  uint32_t SpiClock; /*!< SPI clock select (external or internal with different sampling point).
+                          This parameter can be a value of @ref DFSDM_Channel_SpiClock */
+} DFSDM_Channel_SerialInterfaceTypeDef;
+
+/**
+  * @brief  DFSDM channel analog watchdog structure definition
+  */
+typedef struct
+{
+  uint32_t FilterOrder;  /*!< Analog watchdog Sinc filter order.
+                              This parameter can be a value of @ref DFSDM_Channel_AwdFilterOrder */
+  uint32_t Oversampling; /*!< Analog watchdog filter oversampling ratio.
+                              This parameter must be a number between Min_Data = 1 and Max_Data = 32 */
+} DFSDM_Channel_AwdTypeDef;
+
+/**
+  * @brief  DFSDM channel init structure definition
+  */
+typedef struct
+{
+  DFSDM_Channel_OutputClockTypeDef     OutputClock;     /*!< DFSDM channel output clock parameters */
+  DFSDM_Channel_InputTypeDef           Input;           /*!< DFSDM channel input parameters */
+  DFSDM_Channel_SerialInterfaceTypeDef SerialInterface; /*!< DFSDM channel serial interface parameters */
+  DFSDM_Channel_AwdTypeDef             Awd;             /*!< DFSDM channel analog watchdog parameters */
+  int32_t                              Offset;          /*!< DFSDM channel offset.
+                                                             This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+  uint32_t                             RightBitShift;   /*!< DFSDM channel right bit shift.
+                                                             This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+} DFSDM_Channel_InitTypeDef;
+
+/**
+  * @brief  DFSDM channel handle structure definition
+  */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+typedef struct __DFSDM_Channel_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */
+{
+  DFSDM_Channel_TypeDef          *Instance; /*!< DFSDM channel instance */
+  DFSDM_Channel_InitTypeDef      Init;      /*!< DFSDM channel init parameters */
+  HAL_DFSDM_Channel_StateTypeDef State;     /*!< DFSDM channel state */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+  void (*CkabCallback)      (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel clock absence detection callback */
+  void (*ScdCallback)       (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel short circuit detection callback */
+  void (*MspInitCallback)   (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP init callback */
+  void (*MspDeInitCallback) (struct __DFSDM_Channel_HandleTypeDef *hdfsdm_channel); /*!< DFSDM channel MSP de-init callback */
+#endif
+} DFSDM_Channel_HandleTypeDef;
+
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  DFSDM channel callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DFSDM_CHANNEL_CKAB_CB_ID      = 0x00U, /*!< DFSDM channel clock absence detection callback ID */
+  HAL_DFSDM_CHANNEL_SCD_CB_ID       = 0x01U, /*!< DFSDM channel short circuit detection callback ID */
+  HAL_DFSDM_CHANNEL_MSPINIT_CB_ID   = 0x02U, /*!< DFSDM channel MSP init callback ID */
+  HAL_DFSDM_CHANNEL_MSPDEINIT_CB_ID = 0x03U  /*!< DFSDM channel MSP de-init callback ID */
+} HAL_DFSDM_Channel_CallbackIDTypeDef;
+
+/**
+  * @brief  DFSDM channel callback pointer definition
+  */
+typedef void (*pDFSDM_Channel_CallbackTypeDef)(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+#endif
+
+/**
+  * @brief  HAL DFSDM Filter states definition
+  */
+typedef enum
+{
+  HAL_DFSDM_FILTER_STATE_RESET   = 0x00U, /*!< DFSDM filter not initialized */
+  HAL_DFSDM_FILTER_STATE_READY   = 0x01U, /*!< DFSDM filter initialized and ready for use */
+  HAL_DFSDM_FILTER_STATE_REG     = 0x02U, /*!< DFSDM filter regular conversion in progress */
+  HAL_DFSDM_FILTER_STATE_INJ     = 0x03U, /*!< DFSDM filter injected conversion in progress */
+  HAL_DFSDM_FILTER_STATE_REG_INJ = 0x04U, /*!< DFSDM filter regular and injected conversions in progress */
+  HAL_DFSDM_FILTER_STATE_ERROR   = 0xFFU  /*!< DFSDM filter state error */
+} HAL_DFSDM_Filter_StateTypeDef;
+
+/**
+  * @brief  DFSDM filter regular conversion parameters structure definition
+  */
+typedef struct
+{
+  uint32_t        Trigger;  /*!< Trigger used to start regular conversion: software or synchronous.
+                                 This parameter can be a value of @ref DFSDM_Filter_Trigger */
+  FunctionalState FastMode; /*!< Enable/disable fast mode for regular conversion */
+  FunctionalState DmaMode;  /*!< Enable/disable DMA for regular conversion */
+} DFSDM_Filter_RegularParamTypeDef;
+
+/**
+  * @brief  DFSDM filter injected conversion parameters structure definition
+  */
+typedef struct
+{
+  uint32_t        Trigger;        /*!< Trigger used to start injected conversion: software, external or synchronous.
+                                       This parameter can be a value of @ref DFSDM_Filter_Trigger */
+  FunctionalState ScanMode;       /*!< Enable/disable scanning mode for injected conversion */
+  FunctionalState DmaMode;        /*!< Enable/disable DMA for injected conversion */
+  uint32_t        ExtTrigger;     /*!< External trigger.
+                                       This parameter can be a value of @ref DFSDM_Filter_ExtTrigger */
+  uint32_t        ExtTriggerEdge; /*!< External trigger edge: rising, falling or both.
+                                       This parameter can be a value of @ref DFSDM_Filter_ExtTriggerEdge */
+} DFSDM_Filter_InjectedParamTypeDef;
+
+/**
+  * @brief  DFSDM filter parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SincOrder;       /*!< Sinc filter order.
+                                 This parameter can be a value of @ref DFSDM_Filter_SincOrder */
+  uint32_t Oversampling;    /*!< Filter oversampling ratio.
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+  uint32_t IntOversampling; /*!< Integrator oversampling ratio.
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 256 */
+} DFSDM_Filter_FilterParamTypeDef;
+
+/**
+  * @brief  DFSDM filter init structure definition
+  */
+typedef struct
+{
+  DFSDM_Filter_RegularParamTypeDef  RegularParam;  /*!< DFSDM regular conversion parameters */
+  DFSDM_Filter_InjectedParamTypeDef InjectedParam; /*!< DFSDM injected conversion parameters */
+  DFSDM_Filter_FilterParamTypeDef   FilterParam;   /*!< DFSDM filter parameters */
+} DFSDM_Filter_InitTypeDef;
+
+/**
+  * @brief  DFSDM filter handle structure definition
+  */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+typedef struct __DFSDM_Filter_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DFSDM_REGISTER_CALLBACKS */
+{
+  DFSDM_Filter_TypeDef          *Instance;           /*!< DFSDM filter instance */
+  DFSDM_Filter_InitTypeDef      Init;                /*!< DFSDM filter init parameters */
+  DMA_HandleTypeDef             *hdmaReg;            /*!< Pointer on DMA handler for regular conversions */
+  DMA_HandleTypeDef             *hdmaInj;            /*!< Pointer on DMA handler for injected conversions */
+  uint32_t                      RegularContMode;     /*!< Regular conversion continuous mode */
+  uint32_t                      RegularTrigger;      /*!< Trigger used for regular conversion */
+  uint32_t                      InjectedTrigger;     /*!< Trigger used for injected conversion */
+  uint32_t                      ExtTriggerEdge;      /*!< Rising, falling or both edges selected */
+  FunctionalState               InjectedScanMode;    /*!< Injected scanning mode */
+  uint32_t                      InjectedChannelsNbr; /*!< Number of channels in injected sequence */
+  uint32_t                      InjConvRemaining;    /*!< Injected conversions remaining */
+  HAL_DFSDM_Filter_StateTypeDef State;               /*!< DFSDM filter state */
+  uint32_t                      ErrorCode;           /*!< DFSDM filter error code */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+  void (*AwdCallback)             (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                      uint32_t Channel, uint32_t Threshold);                            /*!< DFSDM filter analog watchdog callback */
+  void (*RegConvCpltCallback)     (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter regular conversion complete callback */
+  void (*RegConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half regular conversion complete callback */
+  void (*InjConvCpltCallback)     (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter injected conversion complete callback */
+  void (*InjConvHalfCpltCallback) (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter half injected conversion complete callback */
+  void (*ErrorCallback)           (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter error callback */
+  void (*MspInitCallback)         (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP init callback */
+  void (*MspDeInitCallback)       (struct __DFSDM_Filter_HandleTypeDef *hdfsdm_filter); /*!< DFSDM filter MSP de-init callback */
+#endif
+}DFSDM_Filter_HandleTypeDef;
+
+/**
+  * @brief  DFSDM filter analog watchdog parameters structure definition
+  */
+typedef struct
+{
+  uint32_t DataSource;      /*!< Values from digital filter or from channel watchdog filter.
+                                 This parameter can be a value of @ref DFSDM_Filter_AwdDataSource */
+  uint32_t Channel;         /*!< Analog watchdog channel selection.
+                                 This parameter can be a values combination of @ref DFSDM_Channel_Selection */
+  int32_t  HighThreshold;   /*!< High threshold for the analog watchdog.
+                                 This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+  int32_t  LowThreshold;    /*!< Low threshold for the analog watchdog.
+                                 This parameter must be a number between Min_Data = -8388608 and Max_Data = 8388607 */
+  uint32_t HighBreakSignal; /*!< Break signal assigned to analog watchdog high threshold event.
+                                 This parameter can be a values combination of @ref DFSDM_BreakSignals */
+  uint32_t LowBreakSignal;  /*!< Break signal assigned to analog watchdog low threshold event.
+                                 This parameter can be a values combination of @ref DFSDM_BreakSignals */
+} DFSDM_Filter_AwdParamTypeDef;
+
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  DFSDM filter callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DFSDM_FILTER_REGCONV_COMPLETE_CB_ID     = 0x00U, /*!< DFSDM filter regular conversion complete callback ID */
+  HAL_DFSDM_FILTER_REGCONV_HALFCOMPLETE_CB_ID = 0x01U, /*!< DFSDM filter half regular conversion complete callback ID */
+  HAL_DFSDM_FILTER_INJCONV_COMPLETE_CB_ID     = 0x02U, /*!< DFSDM filter injected conversion complete callback ID */
+  HAL_DFSDM_FILTER_INJCONV_HALFCOMPLETE_CB_ID = 0x03U, /*!< DFSDM filter half injected conversion complete callback ID */
+  HAL_DFSDM_FILTER_ERROR_CB_ID                = 0x04U, /*!< DFSDM filter error callback ID */
+  HAL_DFSDM_FILTER_MSPINIT_CB_ID              = 0x05U, /*!< DFSDM filter MSP init callback ID */
+  HAL_DFSDM_FILTER_MSPDEINIT_CB_ID            = 0x06U  /*!< DFSDM filter MSP de-init callback ID */
+} HAL_DFSDM_Filter_CallbackIDTypeDef;
+
+/**
+  * @brief  DFSDM filter callback pointer definition
+  */
+typedef void (*pDFSDM_Filter_CallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+typedef void (*pDFSDM_Filter_AwdCallbackTypeDef)(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold);
+#endif
+
+/**
+  * @}
+  */
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Constants DFSDM Exported Constants
+  * @{
+  */
+
+/** @defgroup DFSDM_Channel_OuputClock DFSDM channel output clock selection
+  * @{
+  */
+#define DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM    0x00000000U             /*!< Source for ouput clock is system clock */
+#define DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO     DFSDM_CHCFGR1_CKOUTSRC  /*!< Source for ouput clock is audio clock */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_InputMultiplexer DFSDM channel input multiplexer
+  * @{
+  */
+#define DFSDM_CHANNEL_EXTERNAL_INPUTS    0x00000000U             /*!< Data are taken from external inputs */
+#define DFSDM_CHANNEL_ADC_OUTPUT         DFSDM_CHCFGR1_DATMPX_0  /*!< Data are taken from ADC output */
+#define DFSDM_CHANNEL_INTERNAL_REGISTER  DFSDM_CHCFGR1_DATMPX_1  /*!< Data are taken from internal register */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_DataPacking DFSDM channel input data packing
+  * @{
+  */
+#define DFSDM_CHANNEL_STANDARD_MODE         0x00000000U             /*!< Standard data packing mode */
+#define DFSDM_CHANNEL_INTERLEAVED_MODE      DFSDM_CHCFGR1_DATPACK_0 /*!< Interleaved data packing mode */
+#define DFSDM_CHANNEL_DUAL_MODE             DFSDM_CHCFGR1_DATPACK_1 /*!< Dual data packing mode */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_InputPins DFSDM channel input pins
+  * @{
+  */
+#define DFSDM_CHANNEL_SAME_CHANNEL_PINS      0x00000000U             /*!< Input from pins on same channel */
+#define DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS DFSDM_CHCFGR1_CHINSEL   /*!< Input from pins on following channel */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_SerialInterfaceType DFSDM channel serial interface type
+  * @{
+  */
+#define DFSDM_CHANNEL_SPI_RISING         0x00000000U             /*!< SPI with rising edge */
+#define DFSDM_CHANNEL_SPI_FALLING        DFSDM_CHCFGR1_SITP_0    /*!< SPI with falling edge */
+#define DFSDM_CHANNEL_MANCHESTER_RISING  DFSDM_CHCFGR1_SITP_1    /*!< Manchester with rising edge */
+#define DFSDM_CHANNEL_MANCHESTER_FALLING DFSDM_CHCFGR1_SITP      /*!< Manchester with falling edge */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_SpiClock DFSDM channel SPI clock selection
+  * @{
+  */
+#define DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL              0x00000000U              /*!< External SPI clock */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL              DFSDM_CHCFGR1_SPICKSEL_0 /*!< Internal SPI clock */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING DFSDM_CHCFGR1_SPICKSEL_1 /*!< Internal SPI clock divided by 2, falling edge */
+#define DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING  DFSDM_CHCFGR1_SPICKSEL   /*!< Internal SPI clock divided by 2, rising edge */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_AwdFilterOrder DFSDM channel analog watchdog filter order
+  * @{
+  */
+#define DFSDM_CHANNEL_FASTSINC_ORDER 0x00000000U             /*!< FastSinc filter type */
+#define DFSDM_CHANNEL_SINC1_ORDER    DFSDM_CHAWSCDR_AWFORD_0 /*!< Sinc 1 filter type */
+#define DFSDM_CHANNEL_SINC2_ORDER    DFSDM_CHAWSCDR_AWFORD_1 /*!< Sinc 2 filter type */
+#define DFSDM_CHANNEL_SINC3_ORDER    DFSDM_CHAWSCDR_AWFORD   /*!< Sinc 3 filter type */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_Trigger DFSDM filter conversion trigger
+  * @{
+  */
+#define DFSDM_FILTER_SW_TRIGGER   0x00000000U /*!< Software trigger */
+#define DFSDM_FILTER_SYNC_TRIGGER 0x00000001U /*!< Synchronous with DFSDM_FLT0 */
+#define DFSDM_FILTER_EXT_TRIGGER  0x00000002U /*!< External trigger (only for injected conversion) */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_ExtTrigger DFSDM filter external trigger
+  * @{
+  */
+#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO      0x00000000U                                       /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2     DFSDM_FLTCR1_JEXTSEL_0                            /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO      DFSDM_FLTCR1_JEXTSEL_1                            /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2     (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM3_TRGO      DFSDM_FLTCR1_JEXTSEL_2                            /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM4_TRGO      (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2) /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM16_OC1       (DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1)                        /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM6_TRGO       (DFSDM_FLTCR1_JEXTSEL_0 | DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1) /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_TIM7_TRGO      DFSDM_FLTCR1_JEXTSEL_3                            /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG1  (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_0)
+#define DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG3  (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1)
+#define DFSDM_FILTER_EXT_TRIG_EXTI11          (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3) /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_EXTI15          (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_0)                           /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT      (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1)                           /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT      (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1 | DFSDM_FLTCR1_JEXTSEL_0)  /*!< For all DFSDM filters */
+#define DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT      (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_2)                           /*!< For all DFSDM filters */
+#if (STM32H7_DEV_ID == 0x480UL)
+#define DFSDM_FILTER_EXT_TRIG_COMP1_OUT      (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | \
+                                              DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_0)       
+#define DFSDM_FILTER_EXT_TRIG_COMP2_OUT      (DFSDM_FLTCR1_JEXTSEL_4 | DFSDM_FLTCR1_JEXTSEL_3 | \
+                                              DFSDM_FLTCR1_JEXTSEL_2 | DFSDM_FLTCR1_JEXTSEL_1)
+#elif (STM32H7_DEV_ID == 0x483UL)
+#define DFSDM_FILTER_EXT_TRIG_TIM23_TRGO     (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_1 | \
+                                              DFSDM_FLTCR1_JEXTSEL_0) 
+#define DFSDM_FILTER_EXT_TRIG_TIM24_TRGO     (DFSDM_FLTCR1_JEXTSEL_3 | DFSDM_FLTCR1_JEXTSEL_2 )
+#endif /* STM32H7_DEV_ID == 0x480UL */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_ExtTriggerEdge DFSDM filter external trigger edge
+  * @{
+  */
+#define DFSDM_FILTER_EXT_TRIG_RISING_EDGE  DFSDM_FLTCR1_JEXTEN_0 /*!< External rising edge */
+#define DFSDM_FILTER_EXT_TRIG_FALLING_EDGE DFSDM_FLTCR1_JEXTEN_1 /*!< External falling edge */
+#define DFSDM_FILTER_EXT_TRIG_BOTH_EDGES   DFSDM_FLTCR1_JEXTEN   /*!< External rising and falling edges */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_SincOrder DFSDM filter sinc order
+  * @{
+  */
+#define DFSDM_FILTER_FASTSINC_ORDER 0x00000000U                                 /*!< FastSinc filter type */
+#define DFSDM_FILTER_SINC1_ORDER    DFSDM_FLTFCR_FORD_0                         /*!< Sinc 1 filter type */
+#define DFSDM_FILTER_SINC2_ORDER    DFSDM_FLTFCR_FORD_1                         /*!< Sinc 2 filter type */
+#define DFSDM_FILTER_SINC3_ORDER    (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_1) /*!< Sinc 3 filter type */
+#define DFSDM_FILTER_SINC4_ORDER    DFSDM_FLTFCR_FORD_2                         /*!< Sinc 4 filter type */
+#define DFSDM_FILTER_SINC5_ORDER    (DFSDM_FLTFCR_FORD_0 | DFSDM_FLTFCR_FORD_2) /*!< Sinc 5 filter type */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_AwdDataSource DFSDM filter analog watchdog data source
+  * @{
+  */
+#define DFSDM_FILTER_AWD_FILTER_DATA  0x00000000U             /*!< From digital filter */
+#define DFSDM_FILTER_AWD_CHANNEL_DATA DFSDM_FLTCR1_AWFSEL     /*!< From analog watchdog channel */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Filter_ErrorCode DFSDM filter error code
+  * @{
+  */
+#define DFSDM_FILTER_ERROR_NONE             0x00000000U /*!< No error */
+#define DFSDM_FILTER_ERROR_REGULAR_OVERRUN  0x00000001U /*!< Overrun occurs during regular conversion */
+#define DFSDM_FILTER_ERROR_INJECTED_OVERRUN 0x00000002U /*!< Overrun occurs during injected conversion */
+#define DFSDM_FILTER_ERROR_DMA              0x00000003U /*!< DMA error occurs */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+#define DFSDM_FILTER_ERROR_INVALID_CALLBACK 0x00000004U /*!< Invalid callback error occurs */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_BreakSignals DFSDM break signals
+  * @{
+  */
+#define DFSDM_NO_BREAK_SIGNAL 0x00000000U /*!< No break signal */
+#define DFSDM_BREAK_SIGNAL_0  0x00000001U /*!< Break signal 0 */
+#define DFSDM_BREAK_SIGNAL_1  0x00000002U /*!< Break signal 1 */
+#define DFSDM_BREAK_SIGNAL_2  0x00000004U /*!< Break signal 2 */
+#define DFSDM_BREAK_SIGNAL_3  0x00000008U /*!< Break signal 3 */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Channel_Selection DFSDM Channel Selection
+  * @{
+  */
+/* DFSDM Channels ------------------------------------------------------------*/
+/* The DFSDM channels are defined as follows:
+   - in 16-bit LSB the channel mask is set
+   - in 16-bit MSB the channel number is set
+   e.g. for channel 5 definition:
+        - the channel mask is 0x00000020 (bit 5 is set)
+        - the channel number 5 is 0x00050000
+        --> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */
+#define DFSDM_CHANNEL_0                              0x00000001U
+#define DFSDM_CHANNEL_1                              0x00010002U
+#define DFSDM_CHANNEL_2                              0x00020004U
+#define DFSDM_CHANNEL_3                              0x00030008U
+#define DFSDM_CHANNEL_4                              0x00040010U
+#define DFSDM_CHANNEL_5                              0x00050020U
+#define DFSDM_CHANNEL_6                              0x00060040U
+#define DFSDM_CHANNEL_7                              0x00070080U
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_ContinuousMode DFSDM Continuous Mode
+  * @{
+  */
+#define DFSDM_CONTINUOUS_CONV_OFF            0x00000000U /*!< Conversion are not continuous */
+#define DFSDM_CONTINUOUS_CONV_ON             0x00000001U /*!< Conversion are continuous */
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_AwdThreshold DFSDM analog watchdog threshold
+  * @{
+  */
+#define DFSDM_AWD_HIGH_THRESHOLD            0x00000000U /*!< Analog watchdog high threshold */
+#define DFSDM_AWD_LOW_THRESHOLD             0x00000001U /*!< Analog watchdog low threshold */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DFSDM_Exported_Macros DFSDM Exported Macros
+ * @{
+ */
+
+/** @brief  Reset DFSDM channel handle state.
+  * @param  __HANDLE__ DFSDM channel handle.
+  * @retval None
+  */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) do{                                                      \
+                                                               (__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET; \
+                                                               (__HANDLE__)->MspInitCallback = NULL;                \
+                                                               (__HANDLE__)->MspDeInitCallback = NULL;              \
+                                                             } while(0)
+#else
+#define __HAL_DFSDM_CHANNEL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_CHANNEL_STATE_RESET)
+#endif
+
+/** @brief  Reset DFSDM filter handle state.
+  * @param  __HANDLE__ DFSDM filter handle.
+  * @retval None
+  */
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) do{                                                     \
+                                                              (__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET; \
+                                                              (__HANDLE__)->MspInitCallback = NULL;               \
+                                                              (__HANDLE__)->MspDeInitCallback = NULL;             \
+                                                            } while(0)
+#else
+#define __HAL_DFSDM_FILTER_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DFSDM_FILTER_STATE_RESET)
+#endif
+
+/**
+  * @}
+  */
+/* End of exported macros ----------------------------------------------------*/
+
+#if defined(DFSDM_CHDLYR_PLSSKP)
+/* Include DFSDM HAL Extension module */
+#include "stm32h7xx_hal_dfsdm_ex.h"
+#endif /* DFSDM_CHDLYR_PLSSKP */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DFSDM_Exported_Functions DFSDM Exported Functions
+  * @{
+  */
+
+/** @addtogroup DFSDM_Exported_Functions_Group1_Channel Channel initialization and de-initialization functions
+  * @{
+  */
+/* Channel initialization and de-initialization functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_ChannelInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelMspInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelMspDeInit(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+/* Channel callbacks register/unregister functions ****************************/
+HAL_StatusTypeDef HAL_DFSDM_Channel_RegisterCallback(DFSDM_Channel_HandleTypeDef        *hdfsdm_channel,
+                                                     HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID,
+                                                     pDFSDM_Channel_CallbackTypeDef      pCallback);
+HAL_StatusTypeDef HAL_DFSDM_Channel_UnRegisterCallback(DFSDM_Channel_HandleTypeDef        *hdfsdm_channel,
+                                                       HAL_DFSDM_Channel_CallbackIDTypeDef CallbackID);
+#endif
+/**
+  * @}
+  */
+
+/** @addtogroup DFSDM_Exported_Functions_Group2_Channel Channel operation functions
+  * @{
+  */
+/* Channel operation functions ************************************************/
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelCkabStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStart_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Threshold, uint32_t BreakSignal);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelScdStop_IT(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+
+int16_t           HAL_DFSDM_ChannelGetAwdValue(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+HAL_StatusTypeDef HAL_DFSDM_ChannelModifyOffset(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, int32_t Offset);
+
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForCkab(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout);
+HAL_StatusTypeDef HAL_DFSDM_ChannelPollForScd(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t Timeout);
+
+void HAL_DFSDM_ChannelCkabCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+void HAL_DFSDM_ChannelScdCallback(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group3_Channel Channel state function
+  * @{
+  */
+/* Channel state function *****************************************************/
+HAL_DFSDM_Channel_StateTypeDef HAL_DFSDM_ChannelGetState(DFSDM_Channel_HandleTypeDef *hdfsdm_channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DFSDM_Exported_Functions_Group1_Filter Filter initialization and de-initialization functions
+  * @{
+  */
+/* Filter initialization and de-initialization functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterMspInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterMspDeInit(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+#if (USE_HAL_DFSDM_REGISTER_CALLBACKS == 1)
+/* Filter callbacks register/unregister functions ****************************/
+HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterCallback(DFSDM_Filter_HandleTypeDef        *hdfsdm_filter,
+                                                    HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID,
+                                                    pDFSDM_Filter_CallbackTypeDef      pCallback);
+HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterCallback(DFSDM_Filter_HandleTypeDef        *hdfsdm_filter,
+                                                      HAL_DFSDM_Filter_CallbackIDTypeDef CallbackID);
+HAL_StatusTypeDef HAL_DFSDM_Filter_RegisterAwdCallback(DFSDM_Filter_HandleTypeDef      *hdfsdm_filter,
+                                                       pDFSDM_Filter_AwdCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_DFSDM_Filter_UnRegisterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+#endif
+/**
+  * @}
+  */
+
+/** @addtogroup DFSDM_Exported_Functions_Group2_Filter Filter control functions
+  * @{
+  */
+/* Filter control functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigRegChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                   uint32_t                    Channel,
+                                                   uint32_t                    ContinuousMode);
+HAL_StatusTypeDef HAL_DFSDM_FilterConfigInjChannel(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                                   uint32_t                    Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DFSDM_Exported_Functions_Group3_Filter Filter operation functions
+  * @{
+  */
+/* Filter operation functions *********************/
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterRegularStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedMsbStart_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, int16_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterInjectedStop_DMA(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStart_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter,
+                                              DFSDM_Filter_AwdParamTypeDef *awdParam);
+HAL_StatusTypeDef HAL_DFSDM_FilterAwdStop_IT(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStart(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel);
+HAL_StatusTypeDef HAL_DFSDM_FilterExdStop(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+int32_t  HAL_DFSDM_FilterGetRegularValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel);
+int32_t  HAL_DFSDM_FilterGetInjectedValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel);
+int32_t  HAL_DFSDM_FilterGetExdMaxValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel);
+int32_t  HAL_DFSDM_FilterGetExdMinValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t *Channel);
+uint32_t HAL_DFSDM_FilterGetConvTimeValue(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+void HAL_DFSDM_IRQHandler(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForRegConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout);
+HAL_StatusTypeDef HAL_DFSDM_FilterPollForInjConversion(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Timeout);
+
+void HAL_DFSDM_FilterRegConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterRegConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterInjConvCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterInjConvHalfCpltCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+void HAL_DFSDM_FilterAwdCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter, uint32_t Channel, uint32_t Threshold);
+void HAL_DFSDM_FilterErrorCallback(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+/**
+  * @}
+  */
+
+/** @defgroup DFSDM_Exported_Functions_Group4_Filter Filter state functions
+  * @{
+  */
+/* Filter state functions *****************************************************/
+HAL_DFSDM_Filter_StateTypeDef HAL_DFSDM_FilterGetState(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+uint32_t                      HAL_DFSDM_FilterGetError(DFSDM_Filter_HandleTypeDef *hdfsdm_filter);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DFSDM_Private_Macros DFSDM Private Macros
+* @{
+*/
+#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK(CLOCK)          (((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_SYSTEM) || \
+                                                       ((CLOCK) == DFSDM_CHANNEL_OUTPUT_CLOCK_AUDIO))
+#define IS_DFSDM_CHANNEL_OUTPUT_CLOCK_DIVIDER(DIVIDER) ((2U <= (DIVIDER)) && ((DIVIDER) <= 256U))
+#define IS_DFSDM_CHANNEL_INPUT(INPUT)                 (((INPUT) == DFSDM_CHANNEL_EXTERNAL_INPUTS) || \
+                                                       ((INPUT) == DFSDM_CHANNEL_ADC_OUTPUT) || \
+                                                       ((INPUT) == DFSDM_CHANNEL_INTERNAL_REGISTER))
+#define IS_DFSDM_CHANNEL_DATA_PACKING(MODE)           (((MODE) == DFSDM_CHANNEL_STANDARD_MODE) || \
+                                                       ((MODE) == DFSDM_CHANNEL_INTERLEAVED_MODE) || \
+                                                       ((MODE) == DFSDM_CHANNEL_DUAL_MODE))
+#define IS_DFSDM_CHANNEL_INPUT_PINS(PINS)             (((PINS) == DFSDM_CHANNEL_SAME_CHANNEL_PINS) || \
+                                                       ((PINS) == DFSDM_CHANNEL_FOLLOWING_CHANNEL_PINS))
+#define IS_DFSDM_CHANNEL_SERIAL_INTERFACE_TYPE(MODE)  (((MODE) == DFSDM_CHANNEL_SPI_RISING) || \
+                                                       ((MODE) == DFSDM_CHANNEL_SPI_FALLING) || \
+                                                       ((MODE) == DFSDM_CHANNEL_MANCHESTER_RISING) || \
+                                                       ((MODE) == DFSDM_CHANNEL_MANCHESTER_FALLING))
+#define IS_DFSDM_CHANNEL_SPI_CLOCK(TYPE)              (((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL) || \
+                                                       ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL) || \
+                                                       ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_FALLING) || \
+                                                       ((TYPE) == DFSDM_CHANNEL_SPI_CLOCK_INTERNAL_DIV2_RISING))
+#define IS_DFSDM_CHANNEL_FILTER_ORDER(ORDER)          (((ORDER) == DFSDM_CHANNEL_FASTSINC_ORDER) || \
+                                                       ((ORDER) == DFSDM_CHANNEL_SINC1_ORDER) || \
+                                                       ((ORDER) == DFSDM_CHANNEL_SINC2_ORDER) || \
+                                                       ((ORDER) == DFSDM_CHANNEL_SINC3_ORDER))
+#define IS_DFSDM_CHANNEL_FILTER_OVS_RATIO(RATIO)       ((1U <= (RATIO)) && ((RATIO) <= 32U))
+#define IS_DFSDM_CHANNEL_OFFSET(VALUE)                 ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607))
+#define IS_DFSDM_CHANNEL_RIGHT_BIT_SHIFT(VALUE)        ((VALUE) <= 0x1FU)
+#define IS_DFSDM_CHANNEL_SCD_THRESHOLD(VALUE)          ((VALUE) <= 0xFFU)
+#define IS_DFSDM_FILTER_REG_TRIGGER(TRIG)             (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \
+                                                       ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER))
+#define IS_DFSDM_FILTER_INJ_TRIGGER(TRIG)             (((TRIG) == DFSDM_FILTER_SW_TRIGGER) || \
+                                                       ((TRIG) == DFSDM_FILTER_SYNC_TRIGGER) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIGGER))
+#if (STM32H7_DEV_ID == 0x480UL)
+#define IS_DFSDM_FILTER_EXT_TRIG(TRIG)                (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_COMP1_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_COMP2_OUT))
+#elif (STM32H7_DEV_ID == 0x483UL)
+#define IS_DFSDM_FILTER_EXT_TRIG(TRIG)                (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM23_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM24_TRGO))
+
+#else
+#define IS_DFSDM_FILTER_EXT_TRIG(TRIG)                (((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM1_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM8_TRGO2) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM3_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM4_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM16_OC1) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM6_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_TIM7_TRGO) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG1) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_HRTIM1_ADCTRG3) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI11) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_EXTI15) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM1_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM2_OUT) || \
+                                                       ((TRIG) == DFSDM_FILTER_EXT_TRIG_LPTIM3_OUT))
+#endif /* STM32H7_DEV_ID == 0x480UL */
+#define IS_DFSDM_FILTER_EXT_TRIG_EDGE(EDGE)           (((EDGE) == DFSDM_FILTER_EXT_TRIG_RISING_EDGE)  || \
+                                                       ((EDGE) == DFSDM_FILTER_EXT_TRIG_FALLING_EDGE)  || \
+                                                       ((EDGE) == DFSDM_FILTER_EXT_TRIG_BOTH_EDGES))
+#define IS_DFSDM_FILTER_SINC_ORDER(ORDER)             (((ORDER) == DFSDM_FILTER_FASTSINC_ORDER) || \
+                                                       ((ORDER) == DFSDM_FILTER_SINC1_ORDER) || \
+                                                       ((ORDER) == DFSDM_FILTER_SINC2_ORDER) || \
+                                                       ((ORDER) == DFSDM_FILTER_SINC3_ORDER) || \
+                                                       ((ORDER) == DFSDM_FILTER_SINC4_ORDER) || \
+                                                       ((ORDER) == DFSDM_FILTER_SINC5_ORDER))
+#define IS_DFSDM_FILTER_OVS_RATIO(RATIO)               ((1U <= (RATIO)) && ((RATIO) <= 1024U))
+#define IS_DFSDM_FILTER_INTEGRATOR_OVS_RATIO(RATIO)    ((1U <= (RATIO)) && ((RATIO) <= 256U))
+#define IS_DFSDM_FILTER_AWD_DATA_SOURCE(DATA)         (((DATA) == DFSDM_FILTER_AWD_FILTER_DATA)  || \
+                                                       ((DATA) == DFSDM_FILTER_AWD_CHANNEL_DATA))
+#define IS_DFSDM_FILTER_AWD_THRESHOLD(VALUE)           ((-8388608 <= (VALUE)) && ((VALUE) <= 8388607))
+#define IS_DFSDM_BREAK_SIGNALS(VALUE)                  ((VALUE) <= 0xFU)
+#define IS_DFSDM_REGULAR_CHANNEL(CHANNEL)             (((CHANNEL) == DFSDM_CHANNEL_0)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_1)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_2)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_3)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_4)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_5)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_6)  || \
+                                                       ((CHANNEL) == DFSDM_CHANNEL_7))
+#define IS_DFSDM_INJECTED_CHANNEL(CHANNEL)            (((CHANNEL) != 0U) && ((CHANNEL) <= 0x000F00FFU))
+#define IS_DFSDM_CONTINUOUS_MODE(MODE)                (((MODE) == DFSDM_CONTINUOUS_CONV_OFF)  || \
+                                                       ((MODE) == DFSDM_CONTINUOUS_CONV_ON))
+#if defined(DFSDM2_Channel0)
+#define IS_DFSDM1_CHANNEL_INSTANCE(INSTANCE)          (((INSTANCE) == DFSDM1_Channel0) || \
+                                                       ((INSTANCE) == DFSDM1_Channel1) || \
+                                                       ((INSTANCE) == DFSDM1_Channel2) || \
+                                                       ((INSTANCE) == DFSDM1_Channel3) || \
+                                                       ((INSTANCE) == DFSDM1_Channel4) || \
+                                                       ((INSTANCE) == DFSDM1_Channel5) || \
+                                                       ((INSTANCE) == DFSDM1_Channel6) || \
+                                                       ((INSTANCE) == DFSDM1_Channel7))
+#define IS_DFSDM1_FILTER_INSTANCE(INSTANCE)           (((INSTANCE) == DFSDM1_Filter0) || \
+                                                       ((INSTANCE) == DFSDM1_Filter1) || \
+                                                       ((INSTANCE) == DFSDM1_Filter2) || \
+                                                       ((INSTANCE) == DFSDM1_Filter3) || \
+                                                       ((INSTANCE) == DFSDM1_Filter4) || \
+                                                       ((INSTANCE) == DFSDM1_Filter5) || \
+                                                       ((INSTANCE) == DFSDM1_Filter6) || \
+                                                       ((INSTANCE) == DFSDM1_Filter7))
+#endif /* DFSDM2_Channel0 */
+/**
+  * @}
+  */
+/* End of private macros -----------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DFSDM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dfsdm_ex.h

@@ -0,0 +1,93 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dfsdm_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DFSDM HAL extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DFSDM_EX_H
+#define STM32H7xx_HAL_DFSDM_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(DFSDM_CHDLYR_PLSSKP)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DFSDMEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DFSDMEx_Exported_Functions DFSDM Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup DFSDMEx_Exported_Functions_Group1_Channel Extended channel operation functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_DFDSMEx_ChannelSetPulsesSkipping(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t PulsesValue);
+HAL_StatusTypeDef HAL_DFDSMEx_ChannelGetPulsesSkipping(DFSDM_Channel_HandleTypeDef *hdfsdm_channel, uint32_t *PulsesValue);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @addtogroup DFSDMEx_Private_Macros DFSDM Extended Private Macros
+  * @{
+  */
+
+#define IS_DFSDM_CHANNEL_SKIPPING_VALUE(VALUE)   ((VALUE) < 64U)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DFSDM_CHDLYR_PLSSKP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DFSDM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma2d.h

@@ -0,0 +1,706 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dma2d.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA2D HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DMA2D_H
+#define STM32H7xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+#if defined (DMA2D)
+
+/** @addtogroup DMA2D DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+  * @{
+  */
+#define MAX_DMA2D_LAYER  2U  /*!< DMA2D maximum number of layers */
+
+/**
+  * @brief DMA2D CLUT Structure definition
+  */
+typedef struct
+{
+  uint32_t *pCLUT;                  /*!< Configures the DMA2D CLUT memory address.*/
+
+  uint32_t CLUTColorMode;           /*!< Configures the DMA2D CLUT color mode.
+                                         This parameter can be one value of @ref DMA2D_CLUT_CM. */
+
+  uint32_t Size;                    /*!< Configures the DMA2D CLUT size.
+                                         This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+  * @brief DMA2D Init structure definition
+  */
+typedef struct
+{
+  uint32_t             Mode;               /*!< Configures the DMA2D transfer mode.
+                                                This parameter can be one value of @ref DMA2D_Mode. */
+
+  uint32_t             ColorMode;          /*!< Configures the color format of the output image.
+                                                This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
+
+  uint32_t             OutputOffset;       /*!< Specifies the Offset value.
+                                                This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+  uint32_t             AlphaInverted;     /*!< Select regular or inverted alpha value for the output pixel format converter.
+                                               This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
+
+  uint32_t             RedBlueSwap;       /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR)
+                                               for the output pixel format converter.
+                                               This parameter can be one value of @ref DMA2D_RB_Swap. */
+
+
+  uint32_t             BytesSwap;         /*!< Select byte regular mode or bytes swap mode (two by two).
+                                               This parameter can be one value of @ref DMA2D_Bytes_Swap. */
+
+  uint32_t             LineOffsetMode;    /*!< Configures how is expressed the line offset for the foreground, background and output.
+                                               This parameter can be one value of @ref DMA2D_Line_Offset_Mode. */
+
+} DMA2D_InitTypeDef;
+
+
+/**
+  * @brief DMA2D Layer structure definition
+  */
+typedef struct
+{
+  uint32_t             InputOffset;       /*!< Configures the DMA2D foreground or background offset.
+                                               This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+  uint32_t             InputColorMode;    /*!< Configures the DMA2D foreground or background color mode.
+                                               This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
+
+  uint32_t             AlphaMode;         /*!< Configures the DMA2D foreground or background alpha mode.
+                                               This parameter can be one value of @ref DMA2D_Alpha_Mode. */
+
+  uint32_t             InputAlpha;        /*!< Specifies the DMA2D foreground or background alpha value and color value in case of A8 or A4 color mode.
+                                               This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF except for the color modes detailed below.
+                                               @note In case of A8 or A4 color mode (ARGB), this parameter must be a number between
+                                               Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
+                                               - InputAlpha[24:31] is the alpha value ALPHA[0:7]
+                                               - InputAlpha[16:23] is the red value RED[0:7]
+                                               - InputAlpha[8:15] is the green value GREEN[0:7]
+                                               - InputAlpha[0:7] is the blue value BLUE[0:7]. */
+  uint32_t             AlphaInverted;     /*!< Select regular or inverted alpha value.
+                                               This parameter can be one value of @ref DMA2D_Alpha_Inverted. */
+
+  uint32_t             RedBlueSwap;       /*!< Select regular mode (RGB or ARGB) or swap mode (BGR or ABGR).
+                                               This parameter can be one value of @ref DMA2D_RB_Swap. */
+
+  uint32_t             ChromaSubSampling; /*!< Configure the chroma sub-sampling mode for the YCbCr color mode
+                                               This parameter can be one value of @ref DMA2D_Chroma_Sub_Sampling */
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+  * @brief  HAL DMA2D State structures definition
+  */
+typedef enum
+{
+  HAL_DMA2D_STATE_RESET             = 0x00U,    /*!< DMA2D not yet initialized or disabled       */
+  HAL_DMA2D_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use    */
+  HAL_DMA2D_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing              */
+  HAL_DMA2D_STATE_TIMEOUT           = 0x03U,    /*!< Timeout state                               */
+  HAL_DMA2D_STATE_ERROR             = 0x04U,    /*!< DMA2D state error                           */
+  HAL_DMA2D_STATE_SUSPEND           = 0x05U     /*!< DMA2D process is suspended                  */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+  * @brief  DMA2D handle Structure definition
+  */
+typedef struct __DMA2D_HandleTypeDef
+{
+  DMA2D_TypeDef               *Instance;                                                    /*!< DMA2D register base address.               */
+
+  DMA2D_InitTypeDef           Init;                                                         /*!< DMA2D communication parameters.            */
+
+  void                        (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d);  /*!< DMA2D transfer complete callback.          */
+
+  void                        (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback.             */
+
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+  void                        (* LineEventCallback)( struct __DMA2D_HandleTypeDef * hdma2d);   /*!< DMA2D line event callback.      */
+
+  void                        (* CLUTLoadingCpltCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D CLUT loading completion callback. */
+
+  void                        (* MspInitCallback)( struct __DMA2D_HandleTypeDef * hdma2d);   /*!< DMA2D Msp Init callback.          */
+
+  void                        (* MspDeInitCallback)( struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D Msp DeInit callback.        */
+
+#endif /* (USE_HAL_DMA2D_REGISTER_CALLBACKS) */
+
+  DMA2D_LayerCfgTypeDef       LayerCfg[MAX_DMA2D_LAYER];                                    /*!< DMA2D Layers parameters           */
+
+  HAL_LockTypeDef             Lock;                                                         /*!< DMA2D lock.                                */
+
+  __IO HAL_DMA2D_StateTypeDef State;                                                        /*!< DMA2D transfer state.                      */
+
+  __IO uint32_t               ErrorCode;                                                    /*!< DMA2D error code.                          */
+} DMA2D_HandleTypeDef;
+
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL DMA2D Callback pointer definition
+  */
+typedef  void (*pDMA2D_CallbackTypeDef)(DMA2D_HandleTypeDef * hdma2d); /*!< Pointer to a DMA2D common callback function */
+#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+  * @{
+  */
+#define HAL_DMA2D_ERROR_NONE        0x00000000U  /*!< No error             */
+#define HAL_DMA2D_ERROR_TE          0x00000001U  /*!< Transfer error       */
+#define HAL_DMA2D_ERROR_CE          0x00000002U  /*!< Configuration error  */
+#define HAL_DMA2D_ERROR_CAE         0x00000004U  /*!< CLUT access error    */
+#define HAL_DMA2D_ERROR_TIMEOUT     0x00000020U  /*!< Timeout error        */
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+#define HAL_DMA2D_ERROR_INVALID_CALLBACK 0x00000040U  /*!< Invalid callback error  */
+#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Mode DMA2D Mode
+  * @{
+  */
+#define DMA2D_M2M                   0x00000000U                         /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC               DMA2D_CR_MODE_0                     /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND             DMA2D_CR_MODE_1                     /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M                   (DMA2D_CR_MODE_1 | DMA2D_CR_MODE_0) /*!< DMA2D register to memory transfer mode */
+#define DMA2D_M2M_BLEND_FG          DMA2D_CR_MODE_2                     /*!< DMA2D memory to memory with blending transfer mode and fixed color FG */
+#define DMA2D_M2M_BLEND_BG          (DMA2D_CR_MODE_2 | DMA2D_CR_MODE_0) /*!< DMA2D memory to memory with blending transfer mode and fixed color BG */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode
+  * @{
+  */
+#define DMA2D_OUTPUT_ARGB8888       0x00000000U                           /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_OUTPUT_RGB888         DMA2D_OPFCCR_CM_0                     /*!< RGB888 DMA2D color mode   */
+#define DMA2D_OUTPUT_RGB565         DMA2D_OPFCCR_CM_1                     /*!< RGB565 DMA2D color mode   */
+#define DMA2D_OUTPUT_ARGB1555       (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_OUTPUT_ARGB4444       DMA2D_OPFCCR_CM_2                     /*!< ARGB4444 DMA2D color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+  * @{
+  */
+#define DMA2D_INPUT_ARGB8888        0x00000000U  /*!< ARGB8888 color mode */
+#define DMA2D_INPUT_RGB888          0x00000001U  /*!< RGB888 color mode   */
+#define DMA2D_INPUT_RGB565          0x00000002U  /*!< RGB565 color mode   */
+#define DMA2D_INPUT_ARGB1555        0x00000003U  /*!< ARGB1555 color mode */
+#define DMA2D_INPUT_ARGB4444        0x00000004U  /*!< ARGB4444 color mode */
+#define DMA2D_INPUT_L8              0x00000005U  /*!< L8 color mode       */
+#define DMA2D_INPUT_AL44            0x00000006U  /*!< AL44 color mode     */
+#define DMA2D_INPUT_AL88            0x00000007U  /*!< AL88 color mode     */
+#define DMA2D_INPUT_L4              0x00000008U  /*!< L4 color mode       */
+#define DMA2D_INPUT_A8              0x00000009U  /*!< A8 color mode       */
+#define DMA2D_INPUT_A4              0x0000000AU  /*!< A4 color mode       */
+#define DMA2D_INPUT_YCBCR           0x0000000BU  /*!< YCbCr color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
+  * @{
+  */
+#define DMA2D_NO_MODIF_ALPHA        0x00000000U  /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA         0x00000001U  /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA         0x00000002U  /*!< Replace original alpha channel value by programmed alpha value
+                                                                with original alpha channel value                              */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Alpha_Inverted DMA2D Alpha Inversion
+  * @{
+  */
+#define DMA2D_REGULAR_ALPHA         0x00000000U  /*!< No modification of the alpha channel value */
+#define DMA2D_INVERTED_ALPHA        0x00000001U  /*!< Invert the alpha channel value */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_RB_Swap DMA2D Red and Blue Swap
+  * @{
+  */
+#define DMA2D_RB_REGULAR            0x00000000U  /*!< Select regular mode (RGB or ARGB) */
+#define DMA2D_RB_SWAP               0x00000001U  /*!< Select swap mode (BGR or ABGR) */
+/**
+  * @}
+  */
+
+
+
+/** @defgroup DMA2D_Line_Offset_Mode DMA2D Line Offset Mode
+  * @{
+  */
+#define DMA2D_LOM_PIXELS            0x00000000U   /*!< Line offsets expressed in pixels */
+#define DMA2D_LOM_BYTES             DMA2D_CR_LOM  /*!< Line offsets expressed in bytes */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Bytes_Swap DMA2D Bytes Swap
+  * @{
+  */
+#define DMA2D_BYTES_REGULAR         0x00000000U      /*!< Bytes in regular order in output FIFO */
+#define DMA2D_BYTES_SWAP            DMA2D_OPFCCR_SB  /*!< Bytes are swapped two by two in output FIFO */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Chroma_Sub_Sampling DMA2D Chroma Sub Sampling
+  * @{
+  */
+#define DMA2D_NO_CSS               0x00000000U  /*!< No chroma sub-sampling 4:4:4 */
+#define DMA2D_CSS_422              0x00000001U  /*!< chroma sub-sampling 4:2:2 */
+#define DMA2D_CSS_420              0x00000002U  /*!< chroma sub-sampling 4:2:0 */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
+  * @{
+  */
+#define DMA2D_CCM_ARGB8888          0x00000000U  /*!< ARGB8888 DMA2D CLUT color mode */
+#define DMA2D_CCM_RGB888            0x00000001U  /*!< RGB888 DMA2D CLUT color mode   */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts
+  * @{
+  */
+#define DMA2D_IT_CE                 DMA2D_CR_CEIE            /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC                DMA2D_CR_CTCIE           /*!< CLUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE                DMA2D_CR_CAEIE           /*!< CLUT Access Error Interrupt */
+#define DMA2D_IT_TW                 DMA2D_CR_TWIE            /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC                 DMA2D_CR_TCIE            /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE                 DMA2D_CR_TEIE            /*!< Transfer Error Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Flags DMA2D Flags
+  * @{
+  */
+#define DMA2D_FLAG_CE               DMA2D_ISR_CEIF           /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC              DMA2D_ISR_CTCIF          /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE              DMA2D_ISR_CAEIF          /*!< CLUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW               DMA2D_ISR_TWIF           /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC               DMA2D_ISR_TCIF           /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE               DMA2D_ISR_TEIF           /*!< Transfer Error Interrupt Flag */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+  * @{
+  */
+#define HAL_DMA2D_DisableCLUT       HAL_DMA2D_CLUTLoading_Abort    /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort for compatibility with legacy code */
+/**
+  * @}
+  */
+
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL DMA2D common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_DMA2D_MSPINIT_CB_ID           = 0x00U,    /*!< DMA2D MspInit callback ID                 */
+  HAL_DMA2D_MSPDEINIT_CB_ID         = 0x01U,    /*!< DMA2D MspDeInit callback ID               */
+  HAL_DMA2D_TRANSFERCOMPLETE_CB_ID  = 0x02U,    /*!< DMA2D transfer complete callback ID       */
+  HAL_DMA2D_TRANSFERERROR_CB_ID     = 0x03U,    /*!< DMA2D transfer error callback ID          */
+  HAL_DMA2D_LINEEVENT_CB_ID         = 0x04U,    /*!< DMA2D line event callback ID              */
+  HAL_DMA2D_CLUTLOADINGCPLT_CB_ID   = 0x05U,    /*!< DMA2D CLUT loading completion callback ID */
+}HAL_DMA2D_CallbackIDTypeDef;
+#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
+
+
+/**
+  * @}
+  */
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+  * @{
+  */
+
+/** @brief Reset DMA2D handle state
+  * @param  __HANDLE__ specifies the DMA2D handle.
+  * @retval None
+  */
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) do{                                            \
+                                                      (__HANDLE__)->State = HAL_DMA2D_STATE_RESET;\
+                                                      (__HANDLE__)->MspInitCallback = NULL;       \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                     }while(0)
+#else
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
+
+
+/**
+  * @brief  Enable the DMA2D.
+  * @param  __HANDLE__ DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DMA2D pending flags.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __FLAG__ flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: CLUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag
+  * @retval The state of FLAG.
+  */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clear the DMA2D pending flags.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: CLUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag
+  * @retval None
+  */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified DMA2D interrupts.
+  * @param  __HANDLE__ DMA2D handle
+  * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified DMA2D interrupts.
+  * @param  __HANDLE__ DMA2D handle
+  * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified DMA2D interrupt source is enabled or not.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __INTERRUPT__ specifies the DMA2D interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval The state of INTERRUPT source.
+  */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
+  * @{
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void              HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_DMA2D_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_DMA2D_RegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID, pDMA2D_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_DMA2D_UnRegisterCallback(DMA2D_HandleTypeDef *hdma2d, HAL_DMA2D_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_DMA2D_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTStartLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef *CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void              HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
+  * @{
+  */
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t               HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark
+  * @{
+  */
+#define DMA2D_LINE_WATERMARK_MAX            DMA2D_LWR_LW       /*!< DMA2D maximum line watermark */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Color_Value DMA2D Color Value
+  * @{
+  */
+#define DMA2D_COLOR_VALUE                 0x000000FFU  /*!< Color value mask */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
+  * @{
+  */
+#define DMA2D_MAX_LAYER         2U         /*!< DMA2D maximum number of layers */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Layers DMA2D Layers
+  * @{
+  */
+#define DMA2D_BACKGROUND_LAYER             0x00000000U   /*!< DMA2D Background Layer (layer 0) */
+#define DMA2D_FOREGROUND_LAYER             0x00000001U   /*!< DMA2D Foreground Layer (layer 1) */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Offset DMA2D Offset
+  * @{
+  */
+#define DMA2D_OFFSET                DMA2D_FGOR_LO            /*!< maximum Line Offset */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Size DMA2D Size
+  * @{
+  */
+#define DMA2D_PIXEL                 (DMA2D_NLR_PL >> 16U)    /*!< DMA2D maximum number of pixels per line */
+#define DMA2D_LINE                  DMA2D_NLR_NL             /*!< DMA2D maximum number of lines           */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
+  * @{
+  */
+#define DMA2D_CLUT_SIZE             (DMA2D_FGPFCCR_CS >> 8U)  /*!< DMA2D maximum CLUT size */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+  * @{
+  */
+#define IS_DMA2D_LAYER(LAYER)                 (((LAYER) == DMA2D_BACKGROUND_LAYER) || ((LAYER) == DMA2D_FOREGROUND_LAYER))
+
+#define IS_DMA2D_MODE(MODE)                   (((MODE) == DMA2D_M2M)          || ((MODE) == DMA2D_M2M_PFC) || \
+                                               ((MODE) == DMA2D_M2M_BLEND)    || ((MODE) == DMA2D_R2M)     || \
+                                               ((MODE) == DMA2D_M2M_BLEND_FG) || ((MODE) == DMA2D_M2M_BLEND_BG))
+
+#define IS_DMA2D_CMODE(MODE_ARGB)             (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || ((MODE_ARGB) == DMA2D_OUTPUT_RGB888)   || \
+                                               ((MODE_ARGB) == DMA2D_OUTPUT_RGB565)   || ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
+                                               ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
+
+#define IS_DMA2D_COLOR(COLOR)                 ((COLOR) <= DMA2D_COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE)                   ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL)                 ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET)              ((OOFFSET) <= DMA2D_OFFSET)
+
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM)   (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || ((INPUT_CM) == DMA2D_INPUT_RGB888)   || \
+                                               ((INPUT_CM) == DMA2D_INPUT_RGB565)   || ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
+                                               ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || ((INPUT_CM) == DMA2D_INPUT_L8)       || \
+                                               ((INPUT_CM) == DMA2D_INPUT_AL44)     || ((INPUT_CM) == DMA2D_INPUT_AL88)     || \
+                                               ((INPUT_CM) == DMA2D_INPUT_L4)       || ((INPUT_CM) == DMA2D_INPUT_A8)       || \
+                                               ((INPUT_CM) == DMA2D_INPUT_A4)       || ((INPUT_CM) == DMA2D_INPUT_YCBCR))
+
+#define IS_DMA2D_ALPHA_MODE(AlphaMode)        (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+                                               ((AlphaMode) == DMA2D_REPLACE_ALPHA)  || \
+                                               ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+
+#define IS_DMA2D_ALPHA_INVERTED(Alpha_Inverted) (((Alpha_Inverted) == DMA2D_REGULAR_ALPHA) || \
+                                                 ((Alpha_Inverted) == DMA2D_INVERTED_ALPHA))
+
+#define IS_DMA2D_RB_SWAP(RB_Swap) (((RB_Swap) == DMA2D_RB_REGULAR) || \
+                                   ((RB_Swap) == DMA2D_RB_SWAP))
+
+#define IS_DMA2D_LOM_MODE(LOM)          (((LOM) == DMA2D_LOM_PIXELS) || \
+                                         ((LOM) == DMA2D_LOM_BYTES))
+
+#define IS_DMA2D_BYTES_SWAP(BYTES_SWAP) (((BYTES_SWAP) == DMA2D_BYTES_REGULAR) || \
+                                         ((BYTES_SWAP) == DMA2D_BYTES_SWAP))
+
+#define IS_DMA2D_CHROMA_SUB_SAMPLING(CSS) (((CSS) == DMA2D_NO_CSS)  || \
+                                           ((CSS) == DMA2D_CSS_422) || \
+                                           ((CSS) == DMA2D_CSS_420))
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM)             (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE)         ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
+#define IS_DMA2D_IT(IT)                       (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+                                               ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+                                               ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+#define IS_DMA2D_GET_FLAG(FLAG)               (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+                                               ((FLAG) == DMA2D_FLAG_TW)   || ((FLAG) == DMA2D_FLAG_TC)  || \
+                                               ((FLAG) == DMA2D_FLAG_TE)   || ((FLAG) == DMA2D_FLAG_CE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (DMA2D) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DMA2D_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h

@@ -0,0 +1,312 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_DMA_EX_H
+#define STM32H7xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMAEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+  * @brief DMAEx Exported types
+  * @{
+  */
+
+/**
+  * @brief  HAL DMA Memory definition
+  */
+typedef enum
+{
+  MEMORY0      = 0x00U,    /*!< Memory 0     */
+  MEMORY1      = 0x01U,    /*!< Memory 1     */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+  * @brief  HAL DMAMUX Synchronization configuration structure definition
+  */
+typedef struct
+{
+  uint32_t SyncSignalID;  /*!< Specifies the synchronization signal gating the DMA request in periodic mode.
+                              This parameter can be a value of @ref DMAEx_MUX_SyncSignalID_selection */
+
+  uint32_t SyncPolarity;  /*!< Specifies the polarity of the signal on which the DMA request is synchronized.
+                              This parameter can be a value of @ref DMAEx_MUX_SyncPolarity_selection */
+
+  FunctionalState SyncEnable;  /*!< Specifies if the synchronization shall be enabled or disabled
+                                    This parameter can take the value ENABLE or DISABLE*/
+
+
+  FunctionalState EventEnable;    /*!< Specifies if an event shall be generated once the RequestNumber is reached.
+                                       This parameter can take the value ENABLE or DISABLE */
+
+  uint32_t RequestNumber; /*!< Specifies the number of DMA request that will be authorized after a sync event.
+                               This parameters can be in the range 1 to 32 */
+
+}HAL_DMA_MuxSyncConfigTypeDef;
+
+
+/**
+  * @brief  HAL DMAMUX request generator parameters structure definition
+  */
+typedef struct
+{
+ uint32_t SignalID;      /*!< Specifies the ID of the signal used for DMAMUX request generator
+                              This parameter can be a value of @ref DMAEx_MUX_SignalGeneratorID_selection */
+
+  uint32_t Polarity;       /*!< Specifies the polarity of the signal on which the request is generated.
+                             This parameter can be a value of @ref DMAEx_MUX_RequestGeneneratorPolarity_selection */
+
+  uint32_t RequestNumber;  /*!< Specifies the number of DMA request that will be generated after a signal event.
+                                This parameters can be in the range 1 to 32 */
+
+}HAL_DMA_MuxRequestGeneratorConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Constants DMA Exported Constants
+  * @brief    DMAEx Exported constants
+  * @{
+  */
+
+/** @defgroup DMAEx_MUX_SyncSignalID_selection DMAEx MUX SyncSignalID selection
+  * @brief    DMAEx MUX SyncSignalID selection
+  * @{
+  */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH0_EVT   0U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel0 Event */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH1_EVT   1U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel1 Event */
+#define HAL_DMAMUX1_SYNC_DMAMUX1_CH2_EVT   2U   /*!< DMAMUX1 synchronization Signal is DMAMUX1 Channel2 Event */
+#define HAL_DMAMUX1_SYNC_LPTIM1_OUT        3U   /*!< DMAMUX1 synchronization Signal is LPTIM1 OUT             */
+#define HAL_DMAMUX1_SYNC_LPTIM2_OUT        4U   /*!< DMAMUX1 synchronization Signal is LPTIM2 OUT             */
+#define HAL_DMAMUX1_SYNC_LPTIM3_OUT        5U   /*!< DMAMUX1 synchronization Signal is LPTIM3 OUT             */
+#define HAL_DMAMUX1_SYNC_EXTI0             6U   /*!< DMAMUX1 synchronization Signal is EXTI0 IT               */
+#define HAL_DMAMUX1_SYNC_TIM12_TRGO        7U   /*!< DMAMUX1 synchronization Signal is TIM12 TRGO             */
+
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH0_EVT   0U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel0 Event */
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH1_EVT   1U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel1 Event */
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH2_EVT   2U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel2 Event */
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH3_EVT   3U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel3 Event */
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH4_EVT   4U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel4 Event */
+#define HAL_DMAMUX2_SYNC_DMAMUX2_CH5_EVT   5U   /*!< DMAMUX2 synchronization Signal is DMAMUX2 Channel5 Event */
+#define HAL_DMAMUX2_SYNC_LPUART1_RX_WKUP   6U   /*!< DMAMUX2 synchronization Signal is LPUART1 RX Wakeup      */
+#define HAL_DMAMUX2_SYNC_LPUART1_TX_WKUP   7U   /*!< DMAMUX2 synchronization Signal is LPUART1 TX Wakeup      */
+#define HAL_DMAMUX2_SYNC_LPTIM2_OUT        8U   /*!< DMAMUX2 synchronization Signal is LPTIM2 output          */
+#define HAL_DMAMUX2_SYNC_LPTIM3_OUT        9U   /*!< DMAMUX2 synchronization Signal is LPTIM3 output          */
+#define HAL_DMAMUX2_SYNC_I2C4_WKUP        10U   /*!< DMAMUX2 synchronization Signal is I2C4 Wakeup            */
+#define HAL_DMAMUX2_SYNC_SPI6_WKUP        11U   /*!< DMAMUX2 synchronization Signal is SPI6 Wakeup            */
+#define HAL_DMAMUX2_SYNC_COMP1_OUT        12U   /*!< DMAMUX2 synchronization Signal is Comparator 1 output    */
+#define HAL_DMAMUX2_SYNC_RTC_WKUP         13U   /*!< DMAMUX2 synchronization Signal is RTC Wakeup             */
+#define HAL_DMAMUX2_SYNC_EXTI0            14U   /*!< DMAMUX2 synchronization Signal is EXTI0 IT               */
+#define HAL_DMAMUX2_SYNC_EXTI2            15U   /*!< DMAMUX2 synchronization Signal is EXTI2 IT               */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMAEx_MUX_SyncPolarity_selection DMAEx MUX SyncPolarity selection
+  * @brief    DMAEx MUX SyncPolarity selection
+  * @{
+  */
+#define HAL_DMAMUX_SYNC_NO_EVENT        0x00000000U             /*!< block synchronization events                    */
+#define HAL_DMAMUX_SYNC_RISING          DMAMUX_CxCR_SPOL_0      /*!< synchronize with rising edge events             */
+#define HAL_DMAMUX_SYNC_FALLING         DMAMUX_CxCR_SPOL_1      /*!< synchronize with falling edge events            */
+#define HAL_DMAMUX_SYNC_RISING_FALLING  DMAMUX_CxCR_SPOL        /*!< synchronize with rising and falling edge events */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup DMAEx_MUX_SignalGeneratorID_selection DMAEx MUX SignalGeneratorID selection
+  * @brief    DMAEx MUX SignalGeneratorID selection
+  * @{
+  */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH0_EVT   0U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel0 Event */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH1_EVT   1U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel1 Event */
+#define HAL_DMAMUX1_REQ_GEN_DMAMUX1_CH2_EVT   2U   /*!< DMAMUX1 Request generator Signal is DMAMUX1 Channel2 Event */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM1_OUT        3U   /*!< DMAMUX1 Request generator Signal is LPTIM1 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM2_OUT        4U   /*!< DMAMUX1 Request generator Signal is LPTIM2 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_LPTIM3_OUT        5U   /*!< DMAMUX1 Request generator Signal is LPTIM3 OUT             */
+#define HAL_DMAMUX1_REQ_GEN_EXTI0             6U   /*!< DMAMUX1 Request generator Signal is EXTI0 IT               */
+#define HAL_DMAMUX1_REQ_GEN_TIM12_TRGO        7U   /*!< DMAMUX1 Request generator Signal is TIM12 TRGO             */
+
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH0_EVT   0U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel0 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH1_EVT   1U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel1 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH2_EVT   2U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel2 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH3_EVT   3U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel3 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH4_EVT   4U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel4 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH5_EVT   5U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel5 Event */
+#define HAL_DMAMUX2_REQ_GEN_DMAMUX2_CH6_EVT   6U   /*!< DMAMUX2 Request generator Signal is DMAMUX2 Channel6 Event */
+#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_WKUP   7U   /*!< DMAMUX2 Request generator Signal is LPUART1 RX Wakeup      */
+#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_WKUP   8U   /*!< DMAMUX2 Request generator Signal is LPUART1 TX Wakeup      */
+#define HAL_DMAMUX2_REQ_GEN_LPTIM2_WKUP       9U   /*!< DMAMUX2 Request generator Signal is LPTIM2 Wakeup          */
+#define HAL_DMAMUX2_REQ_GEN_LPTIM2_OUT       10U   /*!< DMAMUX2 Request generator Signal is LPTIM2 OUT             */
+#define HAL_DMAMUX2_REQ_GEN_LPTIM3_WKUP      11U   /*!< DMAMUX2 Request generator Signal is LPTIM3 Wakeup          */
+#define HAL_DMAMUX2_REQ_GEN_LPTIM3_OUT       12U   /*!< DMAMUX2 Request generator Signal is LPTIM3 OUT             */
+#if defined(LPTIM4)
+#define HAL_DMAMUX2_REQ_GEN_LPTIM4_WKUP      13U   /*!< DMAMUX2 Request generator Signal is LPTIM4 Wakeup          */
+#endif /* LPTIM4 */
+#if defined(LPTIM5)
+#define HAL_DMAMUX2_REQ_GEN_LPTIM5_WKUP      14U   /*!< DMAMUX2 Request generator Signal is LPTIM5 Wakeup          */
+#endif /* LPTIM5 */
+#define HAL_DMAMUX2_REQ_GEN_I2C4_WKUP        15U   /*!< DMAMUX2 Request generator Signal is I2C4 Wakeup            */
+#define HAL_DMAMUX2_REQ_GEN_SPI6_WKUP        16U   /*!< DMAMUX2 Request generator Signal is SPI6 Wakeup            */
+#define HAL_DMAMUX2_REQ_GEN_COMP1_OUT        17U   /*!< DMAMUX2 Request generator Signal is Comparator 1 output    */
+#define HAL_DMAMUX2_REQ_GEN_COMP2_OUT        18U   /*!< DMAMUX2 Request generator Signal is Comparator 2 output    */
+#define HAL_DMAMUX2_REQ_GEN_RTC_WKUP         19U   /*!< DMAMUX2 Request generator Signal is RTC Wakeup             */
+#define HAL_DMAMUX2_REQ_GEN_EXTI0            20U   /*!< DMAMUX2 Request generator Signal is EXTI0                  */
+#define HAL_DMAMUX2_REQ_GEN_EXTI2            21U   /*!< DMAMUX2 Request generator Signal is EXTI2                  */
+#define HAL_DMAMUX2_REQ_GEN_I2C4_IT_EVT      22U   /*!< DMAMUX2 Request generator Signal is I2C4 IT Event          */
+#define HAL_DMAMUX2_REQ_GEN_SPI6_IT          23U   /*!< DMAMUX2 Request generator Signal is SPI6 IT                */
+#define HAL_DMAMUX2_REQ_GEN_LPUART1_TX_IT    24U   /*!< DMAMUX2 Request generator Signal is LPUART1 Tx IT          */
+#define HAL_DMAMUX2_REQ_GEN_LPUART1_RX_IT    25U   /*!< DMAMUX2 Request generator Signal is LPUART1 Rx IT          */
+#if defined(ADC3)
+#define HAL_DMAMUX2_REQ_GEN_ADC3_IT          26U   /*!< DMAMUX2 Request generator Signal is ADC3 IT                */
+#define HAL_DMAMUX2_REQ_GEN_ADC3_AWD1_OUT    27U   /*!< DMAMUX2 Request generator Signal is ADC3 Analog Watchdog 1 output */
+#endif /* ADC3 */
+#define HAL_DMAMUX2_REQ_GEN_BDMA_CH0_IT      28U   /*!< DMAMUX2 Request generator Signal is BDMA Channel 0 IT      */
+#define HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT      29U   /*!< DMAMUX2 Request generator Signal is BDMA Channel 1 IT      */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup DMAEx_MUX_RequestGeneneratorPolarity_selection DMAEx MUX RequestGeneneratorPolarity selection
+  * @brief    DMAEx MUX RequestGeneneratorPolarity selection
+  * @{
+  */
+#define HAL_DMAMUX_REQ_GEN_NO_EVENT        0x00000000U           /*!< block request generator events                     */
+#define HAL_DMAMUX_REQ_GEN_RISING          DMAMUX_RGxCR_GPOL_0  /*!< generate request on rising edge events             */
+#define HAL_DMAMUX_REQ_GEN_FALLING         DMAMUX_RGxCR_GPOL_1  /*!< generate request on falling edge events            */
+#define HAL_DMAMUX_REQ_GEN_RISING_FALLING  DMAMUX_RGxCR_GPOL    /*!< generate request on rising and falling edge events */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+  * @brief   DMAEx Exported functions
+  * @{
+  */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+  * @brief   Extended features functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxSync(DMA_HandleTypeDef *hdma, HAL_DMA_MuxSyncConfigTypeDef *pSyncConfig);
+HAL_StatusTypeDef HAL_DMAEx_ConfigMuxRequestGenerator (DMA_HandleTypeDef *hdma, HAL_DMA_MuxRequestGeneratorConfigTypeDef *pRequestGeneratorConfig);
+HAL_StatusTypeDef HAL_DMAEx_EnableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMAEx_DisableMuxRequestGenerator (DMA_HandleTypeDef *hdma);
+
+void HAL_DMAEx_MUX_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Macros DMA Private Macros
+  * @brief    DMAEx private macros
+  * @{
+  */
+
+#define IS_DMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_SYNC_TIM12_TRGO)
+#define IS_BDMA_DMAMUX_SYNC_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_SYNC_EXTI2)
+
+#define IS_DMAMUX_SYNC_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
+
+#define IS_DMAMUX_SYNC_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_SYNC_NO_EVENT)    || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_RISING)   || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_FALLING)  || \
+                                           ((POLARITY) == HAL_DMAMUX_SYNC_RISING_FALLING))
+
+#define IS_DMAMUX_SYNC_STATE(SYNC) (((SYNC) == DISABLE)   || ((SYNC) == ENABLE))
+
+#define IS_DMAMUX_SYNC_EVENT(EVENT) (((EVENT) == DISABLE)   || \
+                                     ((EVENT) == ENABLE))
+
+#define IS_DMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX1_REQ_GEN_TIM12_TRGO)
+#define IS_BDMA_DMAMUX_REQUEST_GEN_SIGNAL_ID(SIGNAL_ID) ((SIGNAL_ID) <= HAL_DMAMUX2_REQ_GEN_BDMA_CH1_IT)
+
+#define IS_DMAMUX_REQUEST_GEN_REQUEST_NUMBER(REQUEST_NUMBER) (((REQUEST_NUMBER) > 0U) && ((REQUEST_NUMBER) <= 32U))
+
+#define IS_DMAMUX_REQUEST_GEN_POLARITY(POLARITY) (((POLARITY) == HAL_DMAMUX_REQ_GEN_NO_EVENT) || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING)   || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_FALLING)   || \
+                                                  ((POLARITY) == HAL_DMAMUX_REQ_GEN_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+  * @brief DMAEx Private functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dts.h

@@ -0,0 +1,483 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_dts.h
+  * @author  MCD Application Team
+  * @brief   Header file of DTS HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_HAL_DTS_H
+#define __STM32H7xx_HAL_DTS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(DTS)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DTS
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DTS_Exported_Types DTS Exported Types
+  * @{
+  */
+
+/**
+  * @brief  DTS Init structure definition
+  */
+typedef struct
+{
+  uint32_t QuickMeasure;  /*!< Specifies the quick measure option selection of the DTS sensor.
+                               This parameter can be a value of @ref DTS_Quick_Measurement */
+
+  uint32_t RefClock;      /*!< Specifies the reference clock selection of the DTS sensor.
+                               This parameter can be a value of @ref DTS_Reference_Clock_Selection */
+
+  uint32_t TriggerInput;  /*!< Specifies the trigger input of the DTS sensor.
+                               This parameter can be a value of @ref DTS_TriggerConfig */
+
+  uint32_t SamplingTime;  /*!< Specifies the sampling time configuration.
+                               This parameter can be a value of @ref DTS_Sampling_Time */
+
+  uint32_t Divider;       /*!< Specifies the high speed clock divider ratio.
+                               This parameter can be a value from 0 to 127 */
+
+  uint32_t HighThreshold;  /*!< Specifies the high threshold of the DTS sensor */
+
+  uint32_t LowThreshold;   /*!< Specifies the low threshold of the DTS sensor */
+
+} DTS_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_DTS_STATE_RESET       = 0x00UL,     /*!< DTS not yet initialized or disabled */
+  HAL_DTS_STATE_READY       = 0x01UL,     /*!< DTS initialized and ready for use   */
+  HAL_DTS_STATE_BUSY        = 0x02UL,     /*!< DTS is running                      */
+  HAL_DTS_STATE_TIMEOUT     = 0x03UL,     /*!< Timeout state                       */
+  HAL_DTS_STATE_ERROR       = 0x04UL      /*!< Internal Process error              */
+} HAL_DTS_StateTypeDef;
+
+/**
+  * @brief  DTS Handle Structure definition
+  */
+#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1)
+typedef struct __DTS_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */
+{
+  DTS_TypeDef         *Instance;    /*!< Register base address */
+  DTS_InitTypeDef     Init;         /*!< DTS required parameters */
+  HAL_LockTypeDef     Lock;         /*!< DTS Locking object */
+  __IO HAL_DTS_StateTypeDef  State; /*!< DTS peripheral state  */
+#if (USE_HAL_DTS_REGISTER_CALLBACKS == 1)
+  void (* MspInitCallback)(struct __DTS_HandleTypeDef *hdts);         /*!< DTS Base Msp Init Callback                   */
+  void (* MspDeInitCallback)(struct __DTS_HandleTypeDef *hdts);       /*!< DTS Base Msp DeInit Callback                 */
+  void (* DTS_EndCallback)(struct __DTS_HandleTypeDef *hdts);         /*!< End measure Callback                         */
+  void (* DTS_LowCallback)(struct __DTS_HandleTypeDef *hdts);         /*!< low threshold Callback                       */
+  void (* DTS_HighCallback)(struct __DTS_HandleTypeDef *hdts);        /*!< high threshold Callback                      */
+  void (* DTS_AsyncEndCallback)(struct __DTS_HandleTypeDef *hdts);    /*!< Asynchronous end of measure Callback         */
+  void (* DTS_AsyncLowCallback)(struct __DTS_HandleTypeDef *hdts);    /*!< Asynchronous low threshold Callback          */
+  void (* DTS_AsyncHighCallback(struct __DTS_HandleTypeDef *hdts);    /*!< Asynchronous high threshold Callback         */
+#endif /* USE_HAL_DTS_REGISTER_CALLBACKS */
+} DTS_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DTS_Exported_Constants DTS Exported Constants
+  * @{
+  */
+
+/** @defgroup DTS_TriggerConfig  DTS Trigger Configuration
+  * @{
+  */
+/* @brief No Hardware trigger detection */
+#define DTS_TRIGGER_HW_NONE   (0UL)
+
+/* @brief External Interrupt Mode with LPTIMER1 trigger detection */
+#define DTS_TRIGGER_LPTIMER1  DTS_CFGR1_TS1_INTRIG_SEL_0
+
+/* @brief External Interrupt Mode with LPTIMER2 trigger detection */
+#define DTS_TRIGGER_LPTIMER2  DTS_CFGR1_TS1_INTRIG_SEL_1
+
+/* @brief External Interrupt Mode with LPTIMER3 trigger detection */
+#define DTS_TRIGGER_LPTIMER3 (DTS_CFGR1_TS1_INTRIG_SEL_0 | DTS_CFGR1_TS1_INTRIG_SEL_1)
+
+/* @brief External Interrupt Mode with EXTI13 trigger detection */
+#define DTS_TRIGGER_EXTI13    DTS_CFGR1_TS1_INTRIG_SEL_2
+/**
+  * @}
+  */
+
+/** @defgroup DTS_Quick_Measurement  DTS Quick Measurement
+  * @{
+  */
+#define DTS_QUICKMEAS_ENABLE    DTS_CFGR1_Q_MEAS_OPT      /*!< Enable the Quick Measure (Measure without calibration) */
+#define DTS_QUICKMEAS_DISABLE   (0x0UL)                   /*!< Disable the Quick Measure (Measure with calibration) */
+/**
+  * @}
+  */
+
+/** @defgroup DTS_Reference_Clock_Selection   DTS Reference Clock Selection
+  * @{
+  */
+#define DTS_REFCLKSEL_LSE   DTS_CFGR1_REFCLK_SEL          /*!< Low speed REF clock (LSE) */
+#define DTS_REFCLKSEL_PCLK (0UL)                          /*!< High speed REF clock (PCLK) */
+/**
+  * @}
+  */
+
+/** @defgroup DTS_Sampling_Time   DTS Sampling Time
+  * @{
+  */
+#define DTS_SMP_TIME_1_CYCLE     DTS_CFGR1_TS1_SMP_TIME_0                                                                                   /*!< 1 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_2_CYCLE     DTS_CFGR1_TS1_SMP_TIME_1                                                                                   /*!< 2 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_3_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_1)                                                       /*!< 3 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_4_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_2)                                                                                 /*!< 4 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_5_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_2)                                                       /*!< 5 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_6_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_2)                                                       /*!< 6 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_7_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_2)                            /*!< 7 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_8_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_3)                                                                                  /*!< 8 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_9_CYCLE    (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_3)                                                       /*!< 9 clock cycle for the sampling time  */
+#define DTS_SMP_TIME_10_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_3)                                                       /*!< 10 clock cycle for the sampling time */
+#define DTS_SMP_TIME_11_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_3)                            /*!< 11 clock cycle for the sampling time */
+#define DTS_SMP_TIME_12_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_2 | DTS_CFGR1_TS1_SMP_TIME_3)                                                       /*!< 12 clock cycle for the sampling time */
+#define DTS_SMP_TIME_13_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_2 | DTS_CFGR1_TS1_SMP_TIME_3)                            /*!< 13 clock cycle for the sampling time */
+#define DTS_SMP_TIME_14_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_2 | DTS_CFGR1_TS1_SMP_TIME_3)                            /*!< 14 clock cycle for the sampling time */
+#define DTS_SMP_TIME_15_CYCLE   (DTS_CFGR1_TS1_SMP_TIME_0 | DTS_CFGR1_TS1_SMP_TIME_1 | DTS_CFGR1_TS1_SMP_TIME_2 | DTS_CFGR1_TS1_SMP_TIME_3) /*!< 15 clock cycle for the sampling time */
+/**
+  * @}
+  */
+/** @defgroup DTS_Flag_Definitions DTS Flag Definitions
+  * @{
+  */
+#define DTS_FLAG_TS1_ITE   DTS_SR_TS1_ITEF   /*!< Interrupt flag for end of measure for DTS1 */
+#define DTS_FLAG_TS1_ITL   DTS_SR_TS1_ITLF   /*!< Interrupt flag for low threshold for DTS1  */
+#define DTS_FLAG_TS1_ITH   DTS_SR_TS1_ITHF   /*!< Interrupt flag for high threshold for DTS1 */
+#define DTS_FLAG_TS1_AITE  DTS_SR_TS1_AITEF  /*!< Asynchronous Interrupt flag for end of measure for DTS1 */
+#define DTS_FLAG_TS1_AITL  DTS_SR_TS1_AITLF  /*!< Asynchronous Interrupt flag for low threshold for DTS1  */
+#define DTS_FLAG_TS1_AITH  DTS_SR_TS1_AITHF  /*!< Asynchronous Interrupt flag for high threshold for DTS1 */
+#define DTS_FLAG_TS1_RDY   DTS_SR_TS1_RDY    /*!< Ready flag for DTS1 */
+/**
+  * @}
+  */
+
+/** @defgroup DTS_Interrupts_Definitions DTS Interrupts Definitions
+  * @{
+  */
+#define DTS_IT_TS1_ITE  DTS_ITENR_TS1_ITEEN   /*!< Enable interrupt flag for end of measure for DTS1 */
+#define DTS_IT_TS1_ITL  DTS_ITENR_TS1_ITLEN   /*!< Enable interrupt flag for low threshold for DTS1  */
+#define DTS_IT_TS1_ITH  DTS_ITENR_TS1_ITHEN   /*!< Enable interrupt flag for high threshold for DTS1 */
+#define DTS_IT_TS1_AITE DTS_ITENR_TS1_AITEEN  /*!< Enable asynchronous interrupt flag for end of measure for DTS1 */
+#define DTS_IT_TS1_AITL DTS_ITENR_TS1_AITLEN  /*!< Enable asynchronous interrupt flag for low threshold for DTS1  */
+#define DTS_IT_TS1_AITH DTS_ITENR_TS1_AITHEN  /*!< Enable asynchronous interrupt flag for high threshold for DTS1 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DTS_Exported_Macros DTS Exported Macros
+  * @{
+  */
+
+/** @brief  Reset DTS handle state
+  * @param  __HANDLE__ DTS handle.
+  * @retval None
+  */
+#define __HAL_DTS_RESET_HANDLE_STATE(__HANDLE__)    ((__HANDLE__)->State = HAL_DTS_STATE_RESET)
+
+/**
+  * @brief  Enable the specified DTS sensor
+  * @param  __HANDLE__ DTS handle.
+  * @retval None
+  */
+#define __HAL_DTS_ENABLE(__HANDLE__)  SET_BIT((__HANDLE__)->Instance->CFGR1, DTS_CFGR1_TS1_EN)
+
+/**
+  * @brief  Disable the specified DTS sensor
+  * @param  __HANDLE__ DTS handle.
+  * @retval None
+  */
+#define __HAL_DTS_DISABLE(__HANDLE__)    CLEAR_BIT((__HANDLE__)->Instance->CFGR1, DTS_CFGR1_TS1_EN)
+
+/**
+  * @brief  Enable the DTS EXTI line in interrupt mode
+  * @retval None
+  */
+#define __HAL_DTS_EXTI_WAKEUP_ENABLE_IT()  SET_BIT(EXTI->IMR3, DTS_EXTI_LINE_DTS1)
+
+/**
+  * @brief  Disable the DTS EXTI line in interrupt mode
+  * @retval None
+  */
+#define __HAL_DTS_EXTI_WAKEUP_DISABLE_IT()  CLEAR_BIT(EXTI->IMR3, DTS_EXTI_LINE_DTS1)
+
+/**
+  * @brief  Enable the DTS EXTI Line in event mode
+  * @retval None
+  */
+#define __HAL_DTS_EXTI_WAKEUP_ENABLE_EVENT() SET_BIT(EXTI->EMR3, DTS_EXTI_LINE_DTS1)
+
+/**
+  * @brief  Disable the DTS EXTI Line in event mode
+  * @retval None
+  */
+#define __HAL_DTS_EXTI_WAKEUP_DISABLE_EVENT()  CLEAR_BIT(EXTI->EMR3, DTS_EXTI_LINE_DTS1)
+
+/** @brief  Checks whether the specified DTS flag is set or not.
+  * @param  __HANDLE__ specifies the DTS Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg DTS_FLAG_TS1_ITE : interrupt flag for end of measure for DTS1
+  *            @arg DTS_FLAG_TS1_ITL : interrupt flag for low threshold for DTS1
+  *            @arg DTS_FLAG_TS1_ITH : interrupt flag for high threshold for DTS1
+  *            @arg DTS_FLAG_TS1_AITE: asynchronous interrupt flag for end of measure for DTS1
+  *            @arg DTS_FLAG_TS1_AITL: asynchronous interrupt flag for low threshold for DTS1
+  *            @arg DTS_FLAG_TS1_AITH: asynchronous interrupt flag for high threshold for DTS1
+  *            @arg DTS_FLAG_TS1_RDY : Ready flag for DTS1
+  *            @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_DTS_GET_FLAG(__HANDLE__, __FLAG__)  \
+        (((((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)))? SET : RESET)
+
+
+/** @brief  Clears the specified DTS pending flag.
+  * @param  __HANDLE__ specifies the DTS Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg DTS_FLAG_TS1_ITE : interrupt flag for end of measure for DTS1
+  *            @arg DTS_FLAG_TS1_ITL : interrupt flag for low threshold for DTS1
+  *            @arg DTS_FLAG_TS1_ITH : interrupt flag for high threshold for DTS1
+  *            @arg DTS_FLAG_TS1_AITE: asynchronous interrupt flag for end of measure for DTS1
+  *            @arg DTS_FLAG_TS1_AITL: asynchronous interrupt flag for low threshold for DTS1
+  *            @arg DTS_FLAG_TS1_AITH: asynchronous interrupt flag for high threshold for DTS1
+  * @retval None
+  */
+#define __HAL_DTS_CLEAR_FLAG(__HANDLE__, __FLAG__)  \
+        ((__HANDLE__)->Instance->ICIFR  = (__FLAG__))
+
+
+/** @brief  Enable the specified DTS interrupt.
+  * @param  __HANDLE__ specifies the DTS Handle.
+  * @param  __INTERRUPT__ specifies the DTS interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg DTS_IT_TS1_ITE  : interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_ITL  : interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_ITH  : interrupt flag for high of measure for DTS1
+  *            @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1
+  * @retval None
+  */
+#define __HAL_DTS_ENABLE_IT(__HANDLE__, __INTERRUPT__)  \
+        SET_BIT((__HANDLE__)->Instance->ITENR, __INTERRUPT__)
+
+
+/** @brief  Disable the specified DTS interrupt.
+  * @param  __HANDLE__ specifies the DTS Handle.
+  * @param  __INTERRUPT__ specifies the DTS interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg DTS_IT_TS1_ITE  : interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_ITL  : interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_ITH  : interrupt flag for high of measure for DTS1
+  *            @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1
+  * @retval None
+  */
+#define __HAL_DTS_DISABLE_IT(__HANDLE__,__INTERRUPT__)  \
+        CLEAR_BIT((__HANDLE__)->Instance->ITENR, __INTERRUPT__)
+
+
+/** @brief  Check whether the specified DTS interrupt source is enabled or not.
+  * @param __HANDLE__ DTS handle.
+  * @param __INTERRUPT__ DTS interrupt source to check
+  *          This parameter can be one of the following values:
+  *            @arg DTS_IT_TS1_ITE  : interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_ITL  : interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_ITH  : interrupt flag for high of measure for DTS1
+  *            @arg DTS_IT_TS1_AITE : asynchronous interrupt flag for end of measure for DTS1
+  *            @arg DTS_IT_TS1_AITL : asynchronous interrupt flag for low of measure for DTS1
+  *            @arg DTS_IT_TS1_AITH : asynchronous interrupt flag for high of measure for DTS1
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_DTS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  \
+        (( ((__HANDLE__)->Instance->ITENR & (__INTERRUPT__)) == (__INTERRUPT__) \
+        )? SET : RESET)
+
+
+/** @brief  Check whether the specified DTS REFCLK is selected
+  * @param __HANDLE__ DTS handle.
+  * @param __REFCLK__ DTS reference clock to check
+  *          This parameter can be one of the following values:
+  * @arg DTS_REFCLKSEL_LSE:   Low speed REF clock
+  * @arg DTS_REFCLKSEL_PCLK:  High speed REF clock
+  * @retval State of the REF clock tested (SET or RESET)
+  */
+#define __HAL_DTS_GET_REFCLK(__HANDLE__, __REFCLK__)  ((((__HANDLE__)->Instance->CFGR1 & (__REFCLK__)) == (__REFCLK__))? SET : RESET)
+
+/** @brief  Get Trigger
+  * @param __HANDLE__ DTS handle.
+  * @retval One of the following trigger
+  *     DTS_TRIGGER_HW_NONE : No HW trigger (SW trigger)
+  *     DTS_TRIGGER_LPTIMER1: LPTIMER1 trigger
+  *     DTS_TRIGGER_LPTIMER2: LPTIMER2 trigger
+  *     DTS_TRIGGER_LPTIMER3: LPTIMER3 trigger
+  *     DTS_TRIGGER_EXTI13  : EXTI13 trigger
+  */
+#define __HAL_DTS_GET_TRIGGER(__HANDLE__)  ((__HANDLE__)->Instance->CFGR1 & (DTS_CFGR1_TS1_INTRIG_SEL))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DTS_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DTS_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_DTS_Init(DTS_HandleTypeDef *hdts);
+HAL_StatusTypeDef HAL_DTS_DeInit(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_MspInit(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_MspDeInit(DTS_HandleTypeDef *hdts);
+/**
+  * @}
+  */
+
+/* IO operation functions  *****************************************************/
+/** @addtogroup DTS_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_DTS_Start(DTS_HandleTypeDef *hdts);
+HAL_StatusTypeDef HAL_DTS_Stop(DTS_HandleTypeDef *hdts);
+HAL_StatusTypeDef HAL_DTS_GetTemperature(DTS_HandleTypeDef *hdts, int32_t *Temperature);
+HAL_StatusTypeDef HAL_DTS_Start_IT(DTS_HandleTypeDef *hdts);
+HAL_StatusTypeDef HAL_DTS_Stop_IT(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_IRQHandler(DTS_HandleTypeDef *hdts);
+HAL_DTS_StateTypeDef HAL_DTS_GetState(DTS_HandleTypeDef *hdts);
+/* Callback in Interrupt mode */
+void              HAL_DTS_EndCallback(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_LowCallback(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_HighCallback(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_AsyncEndCallback(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_AsyncLowCallback(DTS_HandleTypeDef *hdts);
+void              HAL_DTS_AsyncHighCallback(DTS_HandleTypeDef *hdts);
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DTS_Private_Constants DTS Private Constants
+  * @{
+  */
+/** @defgroup DTS_ExtiLine DTS EXTI Lines
+  * @{
+  */
+#define DTS_EXTI_LINE_DTS1           (EXTI_IMR3_IM88)  /*!< EXTI line 88 connected to DTS1 output */
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DTS_Private_Macros DTS Private Macros
+  * @{
+  */
+
+/** @defgroup DTS_IS_DTS_Definitions  DTS Private macros to check input parameters
+  * @{
+  */
+#define IS_DTS_QUICKMEAS(__SEL__)   (((__SEL__) == DTS_QUICKMEAS_DISABLE) || \
+                                     ((__SEL__) == DTS_QUICKMEAS_ENABLE))
+
+#define IS_DTS_REFCLK(__SEL__)      (((__SEL__) == DTS_REFCLKSEL_LSE) || \
+                                     ((__SEL__) == DTS_REFCLKSEL_PCLK))
+
+#define IS_DTS_TRIGGERINPUT(__INPUT__)  (((__INPUT__) == DTS_TRIGGER_HW_NONE)   || \
+                                         ((__INPUT__) == DTS_TRIGGER_LPTIMER1)  || \
+                                         ((__INPUT__) == DTS_TRIGGER_LPTIMER2)  || \
+                                         ((__INPUT__) == DTS_TRIGGER_LPTIMER3)  || \
+                                         ((__INPUT__) == DTS_TRIGGER_EXTI13))
+
+#define IS_DTS_THRESHOLD(__THRESHOLD__)  ((__THRESHOLD__) <= 0xFFFFUL)
+
+#define IS_DTS_DIVIDER_RATIO_NUMBER(__NUMBER__) (((__NUMBER__) >= (2UL)) && ((__NUMBER__) <= (127UL)))
+
+#define IS_DTS_SAMPLINGTIME(__CYCLE__)  (((__CYCLE__) == DTS_SMP_TIME_1_CYCLE)  || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_2_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_3_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_4_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_5_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_6_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_7_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_8_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_9_CYCLE)    || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_10_CYCLE)   || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_11_CYCLE)   || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_12_CYCLE)   || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_13_CYCLE)   || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_14_CYCLE)   || \
+                                             ((__CYCLE__) == DTS_SMP_TIME_15_CYCLE))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DTS */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_HAL_DTS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h

@@ -0,0 +1,357 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_eth_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of ETH HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_ETH_EX_H
+#define STM32H7xx_HAL_ETH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(ETH)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ETHEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETHEx_Exported_Types ETHEx Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  ETH RX VLAN structure definition
+  */
+typedef struct{
+  FunctionalState InnerVLANTagInStatus;      /*!< Enables or disables Inner VLAN Tag in Rx Status  */
+	
+  uint32_t StripInnerVLANTag;                /*!< Sets the Inner VLAN Tag Stripping on Receive 
+                                                  This parameter can be a value of @ref ETHEx_Rx_Inner_VLAN_Tag_Stripping */
+	
+  FunctionalState InnerVLANTag;              /*!< Enables or disables Inner VLAN Tag */
+
+  FunctionalState DoubleVLANProcessing;      /*!< Enable or Disable double VLAN processing */
+	
+  FunctionalState VLANTagHashTableMatch;     /*!< Enable or Disable VLAN Tag Hash Table Match */
+	
+  FunctionalState VLANTagInStatus;           /*!< Enable or Disable VLAN Tag in Rx status */
+	
+  uint32_t StripVLANTag;                     /*!< Set the VLAN Tag Stripping on Receive 
+                                                  This parameter can be a value of @ref ETHEx_Rx_VLAN_Tag_Stripping */
+	
+  uint32_t VLANTypeCheck;                    /*!< Enable or Disable VLAN Type Check
+                                                  This parameter can be a value of @ref ETHEx_VLAN_Type_Check */
+																				 
+  FunctionalState VLANTagInverceMatch;       /*!< Enable or disable VLAN Tag Inverse Match */																			 
+}ETH_RxVLANConfigTypeDef;
+/** 
+  * 
+  */
+  
+/** 
+  * @brief  ETH TX VLAN structure definition
+  */
+typedef struct{
+  FunctionalState SourceTxDesc;   /*!< Enable or Disable VLAN tag source from DMA tx descriptors */
+  
+  FunctionalState SVLANType;      /*!< Enable or Disable insertion of SVLAN type */
+	
+  uint32_t VLANTagControl;        /*!< Sets the VLAN tag control in tx packets
+                                      This parameter can be a value of @ref ETHEx_VLAN_Tag_Control */
+}ETH_TxVLANConfigTypeDef;
+/** 
+  * 
+  */
+
+/** 
+  * @brief  ETH L3 filter structure definition
+  */
+typedef struct{
+  uint32_t Protocol;                /*!< Sets the L3 filter protocol to IPv4 or IPv6
+                                         This parameter can be a value of @ref ETHEx_L3_Protocol */
+  
+  uint32_t SrcAddrFilterMatch;      /*!< Sets the L3 filter source address match
+                                         This parameter can be a value of @ref ETHEx_L3_Source_Match */
+  
+  uint32_t DestAddrFilterMatch;     /*!< Sets the L3 filter destination address match
+                                         This parameter can be a value of @ref ETHEx_L3_Destination_Match */
+  
+  uint32_t SrcAddrHigherBitsMatch;  /*!< Sets the L3 filter source address higher bits match
+                                         This parameter can be a value from 0 to 31 */
+  
+  uint32_t DestAddrHigherBitsMatch; /*!< Sets the L3 filter destination address higher bits match
+                                         This parameter can be a value from 0 to 31 */
+  
+  uint32_t Ip4SrcAddr;              /*!< Sets the L3 filter IPv4 source address if IPv4 protocol is used
+                                         This parameter can be a value from 0x0 to 0xFFFFFFFF */
+  
+  uint32_t Ip4DestAddr;             /*!< Sets the L3 filter IPv4 destination  address if IPv4 protocol is used
+                                         This parameter can be a value from 0 to 0xFFFFFFFF  */
+  
+  uint32_t Ip6Addr[4];                 /*!< Sets the L3 filter IPv6 address if IPv6 protocol is used
+                                          This parameter must be a table of 4 words (4* 32 bits) */
+}ETH_L3FilterConfigTypeDef;
+/** 
+  * 
+  */
+
+/** 
+  * @brief  ETH L4 filter structure definition
+  */
+typedef struct{
+  uint32_t Protocol;               /*!< Sets the L4 filter protocol to TCP or UDP
+                                        This parameter can be a value of @ref ETHEx_L4_Protocol */
+  
+  uint32_t SrcPortFilterMatch;     /*!< Sets the L4 filter source port match
+                                        This parameter can be a value of @ref ETHEx_L4_Source_Match */
+  
+  uint32_t DestPortFilterMatch;    /*!< Sets the L4 filter destination port match
+                                        This parameter can be a value of @ref ETHEx_L4_Destination_Match */
+  
+  uint32_t SourcePort;             /*!< Sets the L4 filter source port 
+                                        This parameter must be a value from 0x0 to 0xFFFF */
+  
+  uint32_t DestinationPort;        /*!< Sets the L4 filter destination port 
+                                        This parameter must be a value from 0x0 to 0xFFFF */	
+}ETH_L4FilterConfigTypeDef;
+/** 
+  * 
+  */
+  
+/**
+  * @}
+  */
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETHEx_Exported_Constants ETHEx Exported Constants
+  * @{
+  */
+    
+/** @defgroup ETHEx_LPI_Event ETHEx LPI Event
+  * @{
+  */	
+#define ETH_TX_LPI_ENTRY    ETH_MACLCSR_TLPIEN 
+#define ETH_TX_LPI_EXIT     ETH_MACLCSR_TLPIEX 
+#define ETH_RX_LPI_ENTRY    ETH_MACLCSR_RLPIEN
+#define ETH_RX_LPI_EXIT     ETH_MACLCSR_RLPIEX
+/**
+  * @}
+  */
+  
+/** @defgroup ETHEx_L3_Filter ETHEx L3 Filter
+  * @{
+  */
+#define ETH_L3_FILTER_0                 ((uint32_t)0x00000000)
+#define ETH_L3_FILTER_1                 ((uint32_t)0x0000000C)
+/**
+  * @}
+  */
+
+/** @defgroup ETHEx_L4_Filter ETHEx L4 Filter
+  * @{
+  */
+#define ETH_L4_FILTER_0                 ((uint32_t)0x00000000)
+#define ETH_L4_FILTER_1                 ((uint32_t)0x0000000C)
+/**
+  * @}
+  */
+
+/** @defgroup ETHEx_L3_Protocol ETHEx L3 Protocol
+  * @{
+  */
+#define ETH_L3_IPV6_MATCH                       ETH_MACL3L4CR_L3PEN
+#define ETH_L3_IPV4_MATCH                       ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETHEx_L3_Source_Match ETHEx L3 Source Match
+  * @{
+  */
+#define ETH_L3_SRC_ADDR_PERFECT_MATCH_ENABLE    ETH_MACL3L4CR_L3SAM
+#define ETH_L3_SRC_ADDR_INVERSE_MATCH_ENABLE    (ETH_MACL3L4CR_L3SAM | ETH_MACL3L4CR_L3SAIM)
+#define ETH_L3_SRC_ADDR_MATCH_DISABLE           ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+	
+/** @defgroup ETHEx_L3_Destination_Match ETHEx L3 Destination Match
+  * @{
+  */
+#define ETH_L3_DEST_ADDR_PERFECT_MATCH_ENABLE   ETH_MACL3L4CR_L3DAM
+#define ETH_L3_DEST_ADDR_INVERSE_MATCH_ENABLE   (ETH_MACL3L4CR_L3DAM | ETH_MACL3L4CR_L3DAIM)
+#define ETH_L3_DEST_ADDR_MATCH_DISABLE          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+	
+/** @defgroup ETHEx_L4_Protocol ETHEx L4 Protocol
+  * @{
+  */
+#define ETH_L4_UDP_MATCH                        ETH_MACL3L4CR_L4PEN
+#define ETH_L4_TCP_MATCH                        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+	
+/** @defgroup ETHEx_L4_Source_Match ETHEx L4 Source Match
+  * @{
+  */
+#define ETH_L4_SRC_PORT_PERFECT_MATCH_ENABLE    ETH_MACL3L4CR_L4SPM
+#define ETH_L4_SRC_PORT_INVERSE_MATCH_ENABLE    (ETH_MACL3L4CR_L4SPM |ETH_MACL3L4CR_L4SPIM) 
+#define ETH_L4_SRC_PORT_MATCH_DISABLE           ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+	
+/** @defgroup ETHEx_L4_Destination_Match ETHEx L4 Destination Match
+  * @{
+  */
+#define ETH_L4_DEST_PORT_PERFECT_MATCH_ENABLE   ETH_MACL3L4CR_L4DPM
+#define ETH_L4_DEST_PORT_INVERSE_MATCH_ENABLE   (ETH_MACL3L4CR_L4DPM | ETH_MACL3L4CR_L4DPIM)
+#define ETH_L4_DEST_PORT_MATCH_DISABLE          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+  
+/** @defgroup ETHEx_Rx_Inner_VLAN_Tag_Stripping ETHEx Rx Inner VLAN Tag Stripping
+  * @{
+  */ 
+#define ETH_INNERVLANTAGRXSTRIPPING_NONE      ETH_MACVTR_EIVLS_DONOTSTRIP
+#define ETH_INNERVLANTAGRXSTRIPPING_IFPASS    ETH_MACVTR_EIVLS_STRIPIFPASS
+#define ETH_INNERVLANTAGRXSTRIPPING_IFFAILS   ETH_MACVTR_EIVLS_STRIPIFFAILS
+#define ETH_INNERVLANTAGRXSTRIPPING_ALWAYS    ETH_MACVTR_EIVLS_ALWAYSSTRIP
+/**
+  * @}
+  */
+
+/** @defgroup ETHEx_Rx_VLAN_Tag_Stripping ETHEx Rx VLAN Tag Stripping
+  * @{
+  */ 
+#define ETH_VLANTAGRXSTRIPPING_NONE      ETH_MACVTR_EVLS_DONOTSTRIP
+#define ETH_VLANTAGRXSTRIPPING_IFPASS    ETH_MACVTR_EVLS_STRIPIFPASS
+#define ETH_VLANTAGRXSTRIPPING_IFFAILS   ETH_MACVTR_EVLS_STRIPIFFAILS
+#define ETH_VLANTAGRXSTRIPPING_ALWAYS    ETH_MACVTR_EVLS_ALWAYSSTRIP
+/**
+  * @}
+  */
+  
+/** @defgroup ETHEx_VLAN_Type_Check ETHEx VLAN Type Check
+  * @{
+  */ 
+#define ETH_VLANTYPECHECK_DISABLE    ETH_MACVTR_DOVLTC
+#define ETH_VLANTYPECHECK_SVLAN      (ETH_MACVTR_ERSVLM | ETH_MACVTR_ESVL)
+#define ETH_VLANTYPECHECK_CVLAN      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+  
+/** @defgroup ETHEx_VLAN_Tag_Control ETHEx_VLAN_Tag_Control
+  * @{
+  */
+#define ETH_VLANTAGCONTROL_NONE       (ETH_MACVIR_VLP | ETH_MACVIR_VLC_NOVLANTAG)
+#define ETH_VLANTAGCONTROL_DELETE     (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGDELETE)
+#define ETH_VLANTAGCONTROL_INSERT     (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGINSERT)
+#define ETH_VLANTAGCONTROL_REPLACE    (ETH_MACVIR_VLP | ETH_MACVIR_VLC_VLANTAGREPLACE)
+/**
+  * @}
+  */	
+ 
+/** @defgroup ETHEx_Tx_VLAN_Tag ETHEx Tx VLAN Tag
+  * @{
+  */ 
+#define ETH_INNER_TX_VLANTAG    ((uint32_t)0x00000001U)
+#define ETH_OUTER_TX_VLANTAG    ((uint32_t)0x00000000U)
+/**
+  * @}
+  */ 
+  
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ETHEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ETHEx_Exported_Functions_Group1
+  * @{
+  */
+/* MAC ARP Offloading APIs  ***************************************************/
+void              HAL_ETHEx_EnableARPOffload(ETH_HandleTypeDef *heth);
+void              HAL_ETHEx_DisableARPOffload(ETH_HandleTypeDef *heth);
+void              HAL_ETHEx_SetARPAddressMatch(ETH_HandleTypeDef *heth, uint32_t IpAddress); 
+
+/* MAC L3 L4 Filtering APIs ***************************************************/
+void              HAL_ETHEx_EnableL3L4Filtering(ETH_HandleTypeDef *heth);
+void              HAL_ETHEx_DisableL3L4Filtering(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETHEx_GetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, ETH_L3FilterConfigTypeDef *pL3FilterConfig);
+HAL_StatusTypeDef HAL_ETHEx_GetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, ETH_L4FilterConfigTypeDef *pL4FilterConfig);
+HAL_StatusTypeDef HAL_ETHEx_SetL3FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, ETH_L3FilterConfigTypeDef *pL3FilterConfig);
+HAL_StatusTypeDef HAL_ETHEx_SetL4FilterConfig(ETH_HandleTypeDef *heth, uint32_t Filter, ETH_L4FilterConfigTypeDef *pL4FilterConfig);
+
+/* MAC VLAN Processing APIs    ************************************************/
+void              HAL_ETHEx_EnableVLANProcessing(ETH_HandleTypeDef *heth);
+void              HAL_ETHEx_DisableVLANProcessing(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETHEx_GetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig);
+HAL_StatusTypeDef HAL_ETHEx_SetRxVLANConfig(ETH_HandleTypeDef *heth, ETH_RxVLANConfigTypeDef *pVlanConfig);
+void              HAL_ETHEx_SetVLANHashTable(ETH_HandleTypeDef *heth, uint32_t VLANHashTable);
+HAL_StatusTypeDef HAL_ETHEx_GetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag ,ETH_TxVLANConfigTypeDef *pVlanConfig);
+HAL_StatusTypeDef HAL_ETHEx_SetTxVLANConfig(ETH_HandleTypeDef *heth, uint32_t VLANTag ,ETH_TxVLANConfigTypeDef *pVlanConfig);
+void              HAL_ETHEx_SetTxVLANIdentifier(ETH_HandleTypeDef *heth, uint32_t VLANTag ,uint32_t VLANIdentifier);
+
+/* Energy Efficient Ethernet APIs *********************************************/
+void              HAL_ETHEx_EnterLPIMode(ETH_HandleTypeDef *heth, FunctionalState TxAutomate, FunctionalState TxClockStop);
+void              HAL_ETHEx_ExitLPIMode(ETH_HandleTypeDef *heth);
+uint32_t          HAL_ETHEx_GetMACLPIEvent(ETH_HandleTypeDef *heth);
+ 
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#endif /* ETH */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_ETH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h

@@ -0,0 +1,538 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_exti.h
+  * @author  MCD Application Team
+  * @brief   Header file of EXTI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_EXTI_H
+#define STM32H7xx_HAL_EXTI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup EXTI EXTI
+  * @brief EXTI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup EXTI_Exported_Types EXTI Exported Types
+  * @{
+  */
+typedef enum
+{
+  HAL_EXTI_COMMON_CB_ID          = 0x00U,
+} EXTI_CallbackIDTypeDef;
+
+
+/**
+  * @brief  EXTI Handle structure definition
+  */
+typedef struct
+{
+  uint32_t Line;                    /*!<  Exti line number */
+  void (* PendingCallback)(void);   /*!<  Exti pending callback */
+} EXTI_HandleTypeDef;
+
+/**
+  * @brief  EXTI Configuration structure definition
+  */
+typedef struct
+{
+  uint32_t Line;           /*!< The Exti line to be configured. This parameter
+                                can be a value of @ref EXTI_Line */
+  uint32_t Mode;           /*!< The Exit Mode to be configured for a core.
+                                This parameter can be a combination of @ref EXTI_Mode */
+  uint32_t Trigger;        /*!< The Exti Trigger to be configured. This parameter
+                                can be a value of @ref EXTI_Trigger */
+  uint32_t GPIOSel;        /*!< The Exti GPIO multiplexer selection to be configured.
+                                This parameter is only possible for line 0 to 15. It
+                                can be a value of @ref EXTI_GPIOSel */
+
+  uint32_t PendClearSource; /*!< Specifies the event pending clear source for D3/SRD
+                                 domain. This parameter can be a value of @ref
+                                 EXTI_PendClear_Source */
+
+} EXTI_ConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Line  EXTI Line
+  * @{
+  */
+#define EXTI_LINE_0                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x00U)
+#define EXTI_LINE_1                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x01U)
+#define EXTI_LINE_2                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x02U)
+#define EXTI_LINE_3                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x03U)
+#define EXTI_LINE_4                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x04U)
+#define EXTI_LINE_5                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x05U)
+#define EXTI_LINE_6                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x06U)
+#define EXTI_LINE_7                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x07U)
+#define EXTI_LINE_8                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x08U)
+#define EXTI_LINE_9                         (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x09U)
+#define EXTI_LINE_10                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0AU)
+#define EXTI_LINE_11                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0BU)
+#define EXTI_LINE_12                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0CU)
+#define EXTI_LINE_13                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0DU)
+#define EXTI_LINE_14                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0EU)
+#define EXTI_LINE_15                        (EXTI_GPIO     | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x0FU)
+#define EXTI_LINE_16                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x10U)
+#define EXTI_LINE_17                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x11U)
+#define EXTI_LINE_18                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x12U)
+#define EXTI_LINE_19                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x13U)
+#define EXTI_LINE_20                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x14U)
+#define EXTI_LINE_21                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x15U)
+#define EXTI_LINE_22                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
+#define EXTI_LINE_23                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
+#define EXTI_LINE_24                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x18U)
+#define EXTI_LINE_25                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL     | 0x19U)
+#define EXTI_LINE_26                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
+#define EXTI_LINE_27                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
+#define EXTI_LINE_28                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU)
+#define EXTI_LINE_29                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU)
+#define EXTI_LINE_30                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU)
+#define EXTI_LINE_31                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG1 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU)
+#define EXTI_LINE_32                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x00U)
+#define EXTI_LINE_33                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x01U)
+#define EXTI_LINE_34                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x02U)
+#define EXTI_LINE_35                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x03U)
+#define EXTI_LINE_36                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x04U)
+#define EXTI_LINE_37                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x05U)
+#define EXTI_LINE_38                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x06U)
+#define EXTI_LINE_39                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x07U)
+#define EXTI_LINE_40                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x08U)
+#define EXTI_LINE_41                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x09U)
+#define EXTI_LINE_42                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU)
+#define EXTI_LINE_43                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU)
+#if !defined(USB2_OTG_FS)
+#define EXTI_LINE_44                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE    | 0x0CU)
+#else
+#define EXTI_LINE_44                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU)
+#endif /* USB2_OTG_FS */
+#define EXTI_LINE_45                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE    | 0x0DU)
+#if defined(DSI)
+#define EXTI_LINE_46                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0EU)
+#else
+#define EXTI_LINE_46                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE    | 0x0EU)
+#endif /* DSI */
+#define EXTI_LINE_47                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x0FU)
+#define EXTI_LINE_48                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x10U)
+#define EXTI_LINE_49                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x11U)
+#define EXTI_LINE_50                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x12U)
+#define EXTI_LINE_51                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x13U)
+#if defined(LPTIM4)
+#define EXTI_LINE_52                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x14U)
+#else
+#define EXTI_LINE_52                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x14U)
+#endif /*LPTIM4*/
+#if defined(LPTIM5)
+#define EXTI_LINE_53                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL     | 0x15U)
+#else
+#define EXTI_LINE_53                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x15U)
+#endif /*LPTIM5*/
+#define EXTI_LINE_54                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
+#define EXTI_LINE_55                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
+#define EXTI_LINE_56                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x18U)
+#if defined(EXTI_IMR2_IM57)
+#define EXTI_LINE_57                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x19U)
+#else
+#define EXTI_LINE_57                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE    | 0x19U)
+#endif /*EXTI_IMR2_IM57*/
+#define EXTI_LINE_58                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
+#if defined(EXTI_IMR2_IM59)
+#define EXTI_LINE_59                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
+#else
+#define EXTI_LINE_59                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_NONE    | 0x1BU)
+#endif /*EXTI_IMR2_IM59*/
+#define EXTI_LINE_60                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1CU)
+#define EXTI_LINE_61                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1DU)
+#define EXTI_LINE_62                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1EU)
+#define EXTI_LINE_63                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG2 | EXTI_TARGET_MSK_ALL_CPU | 0x1FU)
+#define EXTI_LINE_64                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x00U)
+#define EXTI_LINE_65                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x01U)
+#define EXTI_LINE_66                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x02U)
+#define EXTI_LINE_67                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x03U)
+#define EXTI_LINE_68                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x04U)
+#define EXTI_LINE_69                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x05U)
+#define EXTI_LINE_70                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x06U)
+#define EXTI_LINE_71                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x07U)
+#define EXTI_LINE_72                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x08U)
+#define EXTI_LINE_73                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x09U)
+#define EXTI_LINE_74                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0AU)
+#if defined(ADC3)
+#define EXTI_LINE_75                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0BU)
+#else
+#define EXTI_LINE_75                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 |  EXTI_TARGET_MSK_NONE   | 0x0BU)
+#endif /* ADC3 */
+#if defined(SAI4)
+#define EXTI_LINE_76                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x0CU)
+#else
+#define EXTI_LINE_76                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 |  EXTI_TARGET_MSK_NONE   | 0x0CU)
+#endif /* SAI4 */
+#if defined (DUAL_CORE)
+#define EXTI_LINE_77                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0DU)
+#define EXTI_LINE_78                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x0EU)
+#define EXTI_LINE_79                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x0FU)
+#define EXTI_LINE_80                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x10U)
+#else
+#define EXTI_LINE_77                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0DU)
+#define EXTI_LINE_78                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0EU)
+#define EXTI_LINE_79                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x0FU)
+#define EXTI_LINE_80                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x10U)
+#endif /* DUAL_CORE */
+#define EXTI_LINE_81                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x11U)
+#if defined (DUAL_CORE)
+#define EXTI_LINE_82                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU2| 0x12U)
+#else
+#define EXTI_LINE_82                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x12U)
+#endif /* DUAL_CORE */
+#define EXTI_LINE_83                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x13U)
+#if defined (DUAL_CORE)
+#define EXTI_LINE_84                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_CPU1| 0x14U)
+#else
+#define EXTI_LINE_84                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x14U)
+#endif /* DUAL_CORE */
+#define EXTI_LINE_85                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x15U)
+#if defined(ETH)
+#define EXTI_LINE_86                        (EXTI_CONFIG   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x16U)
+#else
+#define EXTI_LINE_86                        (EXTI_RESERVED | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_NONE| 0x16U)
+#endif /* ETH */
+#define EXTI_LINE_87                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x17U)
+#if defined(DTS)
+#define EXTI_LINE_88                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL | 0x18U)
+#endif /* DTS */
+#if defined(EXTI_IMR3_IM89)
+#define EXTI_LINE_89                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x19U)
+#endif /*EXTI_IMR3_IM89*/
+#if defined(EXTI_IMR3_IM90)
+#define EXTI_LINE_90                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1AU)
+#endif /*EXTI_IMR3_IM90*/
+#if defined(I2C5)
+#define EXTI_LINE_91                        (EXTI_DIRECT   | EXTI_EVENT | EXTI_REG3 | EXTI_TARGET_MSK_ALL_CPU | 0x1BU)
+#endif /*I2C5*/
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Mode  EXTI Mode
+  * @{
+  */
+#define EXTI_MODE_NONE                      0x00000000U
+#define EXTI_MODE_INTERRUPT                 0x00000001U
+#define EXTI_MODE_EVENT                     0x00000002U
+#if defined(DUAL_CORE)
+#define EXTI_MODE_CORE1_INTERRUPT           EXTI_MODE_INTERRUPT
+#define EXTI_MODE_CORE1_EVENT               EXTI_MODE_EVENT
+#define EXTI_MODE_CORE2_INTERRUPT           0x00000010U
+#define EXTI_MODE_CORE2_EVENT               0x00000020U
+#endif /* DUAL_CORE */
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Trigger  EXTI Trigger
+  * @{
+  */
+#define EXTI_TRIGGER_NONE                   0x00000000U
+#define EXTI_TRIGGER_RISING                 0x00000001U
+#define EXTI_TRIGGER_FALLING                0x00000002U
+#define EXTI_TRIGGER_RISING_FALLING         (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_GPIOSel  EXTI GPIOSel
+  * @brief
+  * @{
+  */
+#define EXTI_GPIOA                          0x00000000U
+#define EXTI_GPIOB                          0x00000001U
+#define EXTI_GPIOC                          0x00000002U
+#define EXTI_GPIOD                          0x00000003U
+#define EXTI_GPIOE                          0x00000004U
+#define EXTI_GPIOF                          0x00000005U
+#define EXTI_GPIOG                          0x00000006U
+#define EXTI_GPIOH                          0x00000007U
+#if defined(GPIOI)
+#define EXTI_GPIOI                          0x00000008U
+#endif /*GPIOI*/
+#define EXTI_GPIOJ                          0x00000009U
+#define EXTI_GPIOK                          0x0000000AU
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_PendClear_Source  EXTI PendClear Source
+  * @brief
+  * @{
+  */
+#define EXTI_D3_PENDCLR_SRC_NONE       0x00000000U /*!< No D3 domain pendclear source , PMRx register to be set to zero  */
+#define EXTI_D3_PENDCLR_SRC_DMACH6     0x00000001U /*!< DMA ch6 event selected as D3 domain pendclear source, PMRx register to be set to 1 */
+#define EXTI_D3_PENDCLR_SRC_DMACH7     0x00000002U /*!< DMA ch7 event selected as D3 domain pendclear source, PMRx register to be set to 1*/
+#if defined (LPTIM4)
+#define EXTI_D3_PENDCLR_SRC_LPTIM4     0x00000003U /*!< LPTIM4 out selected as D3 domain pendclear source, PMRx register to be set to 1    */
+#else
+#define EXTI_D3_PENDCLR_SRC_LPTIM2     0x00000003U /*!< LPTIM2 out selected as D3 domain pendclear source, PMRx register to be set to 1    */
+#endif
+#if defined (LPTIM5)
+#define EXTI_D3_PENDCLR_SRC_LPTIM5     0x00000004U /*!< LPTIM5 out selected as D3 domain pendclear source, PMRx register to be set to 1    */
+#else
+#define EXTI_D3_PENDCLR_SRC_LPTIM3     0x00000004U /*!< LPTIM3 out selected as D3 domain pendclear source, PMRx register to be set to 1    */
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants --------------------------------------------------------*/
+/** @defgroup EXTI_Private_Constants EXTI Private Constants
+  * @{
+  */
+/**
+  * @brief  EXTI Line property definition
+  */
+#define EXTI_PROPERTY_SHIFT                 24U
+#define EXTI_DIRECT                         (0x01UL << EXTI_PROPERTY_SHIFT)
+#define EXTI_CONFIG                         (0x02UL << EXTI_PROPERTY_SHIFT)
+#define EXTI_GPIO                           ((0x04UL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
+#define EXTI_RESERVED                       (0x08UL << EXTI_PROPERTY_SHIFT)
+#define EXTI_PROPERTY_MASK                  (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO)
+
+/**
+  * @brief  EXTI Event presence definition
+  */
+#define EXTI_EVENT_PRESENCE_SHIFT           28U
+#define EXTI_EVENT                          (0x01UL << EXTI_EVENT_PRESENCE_SHIFT)
+#define EXTI_EVENT_PRESENCE_MASK            (EXTI_EVENT)
+
+/**
+  * @brief  EXTI Register and bit usage
+  */
+#define EXTI_REG_SHIFT                      16U
+#define EXTI_REG1                           (0x00UL << EXTI_REG_SHIFT)
+#define EXTI_REG2                           (0x01UL << EXTI_REG_SHIFT)
+#define EXTI_REG3                           (0x02UL << EXTI_REG_SHIFT)
+#define EXTI_REG_MASK                       (EXTI_REG1 | EXTI_REG2 | EXTI_REG3)
+#define EXTI_PIN_MASK                       0x0000001FUL
+
+/**
+  * @brief  EXTI Target and bit usage
+  */
+#define EXTI_TARGET_SHIFT                   20U
+#define EXTI_TARGET_MSK_NONE                (0x00UL << EXTI_TARGET_SHIFT)
+#define EXTI_TARGET_MSK_D3SRD               (0x01UL << EXTI_TARGET_SHIFT)
+#define EXTI_TARGET_MSK_CPU1                (0x02UL << EXTI_TARGET_SHIFT)
+#if defined (DUAL_CORE)
+#define EXTI_TARGET_MSK_CPU2                (0x04UL << EXTI_TARGET_SHIFT)
+#define EXTI_TARGET_MASK                    (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2)
+#define EXTI_TARGET_MSK_ALL_CPU             (EXTI_TARGET_MSK_CPU1 | EXTI_TARGET_MSK_CPU2)
+#else
+#define EXTI_TARGET_MASK                    (EXTI_TARGET_MSK_D3SRD | EXTI_TARGET_MSK_CPU1)
+#define EXTI_TARGET_MSK_ALL_CPU              EXTI_TARGET_MSK_CPU1
+#endif /* DUAL_CORE */
+#define EXTI_TARGET_MSK_ALL                  EXTI_TARGET_MASK
+
+/**
+  * @brief  EXTI Mask for interrupt & event mode
+  */
+#if defined (DUAL_CORE)
+#define EXTI_MODE_MASK                      (EXTI_MODE_CORE1_EVENT | EXTI_MODE_CORE1_INTERRUPT | EXTI_MODE_CORE2_INTERRUPT | EXTI_MODE_CORE2_EVENT)
+#else
+#define EXTI_MODE_MASK                      (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  EXTI Mask for trigger possibilities
+  */
+#define EXTI_TRIGGER_MASK                   (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
+
+/**
+  * @brief  EXTI Line number
+  */
+#if (STM32H7_DEV_ID == 0x483UL)
+#define EXTI_LINE_NB                        92UL
+#elif (STM32H7_DEV_ID == 0x480UL)
+#define EXTI_LINE_NB                        89UL
+#else
+#define EXTI_LINE_NB                        88UL
+#endif /* EXTI_LINE_91 */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup EXTI_Private_Macros EXTI Private Macros
+  * @{
+  */
+#define IS_EXTI_PROPERTY(__LINE__)      ((((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \
+                                         (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG)          || \
+                                         (((__LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO))
+#if defined (DUAL_CORE)
+#define IS_EXTI_TARGET(__LINE__)        ((((__LINE__) & EXTI_TARGET_MASK)   == EXTI_TARGET_MSK_CPU1)      || \
+                                         (((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU2)    || \
+                                         (((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL_CPU) || \
+                                         (((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL))
+#else
+#define IS_EXTI_TARGET(__LINE__)        ((((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_CPU1)   || \
+                                         (((__LINE__) & EXTI_TARGET_MASK) == EXTI_TARGET_MSK_ALL))
+#endif
+
+#define IS_EXTI_LINE(__LINE__)          ((((__LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_EVENT_PRESENCE_MASK | EXTI_REG_MASK | EXTI_PIN_MASK | EXTI_TARGET_MASK)) == 0x00UL) && \
+                                         IS_EXTI_PROPERTY(__LINE__) && IS_EXTI_TARGET(__LINE__) && \
+                                         (((__LINE__) & (EXTI_REG_MASK | EXTI_PIN_MASK))      < \
+                                         (((EXTI_LINE_NB / 32UL) << EXTI_REG_SHIFT) | (EXTI_LINE_NB % 32UL))))
+
+#define IS_EXTI_MODE(__MODE__)          (((__MODE__) & ~EXTI_MODE_MASK) == 0x00UL)
+
+#define IS_EXTI_TRIGGER(__LINE__)       (((__LINE__) & ~EXTI_TRIGGER_MASK) == 0x00UL)
+
+#define IS_EXTI_PENDING_EDGE(__LINE__)  (((__LINE__) == EXTI_TRIGGER_RISING) || \
+                                         ((__LINE__) == EXTI_TRIGGER_FALLING)|| \
+                                         ((__LINE__) == EXTI_TRIGGER_RISING_FALLING))
+
+#define IS_EXTI_CONFIG_LINE(__LINE__)   (((__LINE__) & EXTI_CONFIG) != 0x00UL)
+
+#if defined(GPIOI)
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF) || \
+                                         ((__PORT__) == EXTI_GPIOG) || \
+                                         ((__PORT__) == EXTI_GPIOH) || \
+                                         ((__PORT__) == EXTI_GPIOI) || \
+                                         ((__PORT__) == EXTI_GPIOJ) || \
+                                         ((__PORT__) == EXTI_GPIOK))
+#else
+#define IS_EXTI_GPIO_PORT(__PORT__)     (((__PORT__) == EXTI_GPIOA) || \
+                                         ((__PORT__) == EXTI_GPIOB) || \
+                                         ((__PORT__) == EXTI_GPIOC) || \
+                                         ((__PORT__) == EXTI_GPIOD) || \
+                                         ((__PORT__) == EXTI_GPIOE) || \
+                                         ((__PORT__) == EXTI_GPIOF) || \
+                                         ((__PORT__) == EXTI_GPIOG) || \
+                                         ((__PORT__) == EXTI_GPIOH) || \
+                                         ((__PORT__) == EXTI_GPIOJ) || \
+                                         ((__PORT__) == EXTI_GPIOK))
+#endif /*GPIOI*/
+
+#define IS_EXTI_GPIO_PIN(__PIN__)       ((__PIN__) < 16UL)
+#if defined (LPTIM4) && defined (LPTIM5)
+#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM4) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM5))
+#else
+#define IS_EXTI_D3_PENDCLR_SRC(__SRC__) (((__SRC__) == EXTI_D3_PENDCLR_SRC_NONE) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH6) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_DMACH7) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM2) || \
+                                         ((__SRC__) == EXTI_D3_PENDCLR_SRC_LPTIM3))
+#endif /* LPTIM4 && LPTIM5 */
+
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
+  * @brief    EXTI Exported Functions
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
+  * @brief    Configuration functions
+  * @{
+  */
+/* Configuration functions ****************************************************/
+HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
+HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
+HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
+HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
+  * @brief    IO operation functions
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void              HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
+uint32_t          HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
+void              HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_EXTI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h

@@ -0,0 +1,864 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_flash.h
+  * @author  MCD Application Team
+  * @brief   Header file of FLASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_FLASH_H
+#define STM32H7xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum
+{
+  FLASH_PROC_NONE = 0U,
+  FLASH_PROC_SECTERASE_BANK1,
+  FLASH_PROC_MASSERASE_BANK1,
+  FLASH_PROC_PROGRAM_BANK1,
+  FLASH_PROC_SECTERASE_BANK2,
+  FLASH_PROC_MASSERASE_BANK2,
+  FLASH_PROC_PROGRAM_BANK2,
+  FLASH_PROC_ALLBANK_MASSERASE
+} FLASH_ProcedureTypeDef;
+
+
+/**
+  * @brief  FLASH handle Structure definition
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+  __IO uint32_t               NbSectorsToErase;   /*!< Internal variable to save the remaining sectors to erase in IT context        */
+
+  __IO uint32_t               VoltageForErase;    /*!< Internal variable to provide voltage range selected by user in IT context     */
+
+  __IO uint32_t               Sector;             /*!< Internal variable to define the current sector which is erasing               */
+
+  __IO uint32_t               Address;            /*!< Internal variable to save address selected for program                        */
+
+  HAL_LockTypeDef             Lock;               /*!< FLASH locking object                                                          */
+
+  __IO uint32_t               ErrorCode;          /*!< FLASH error code                                                              */
+
+}FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */
+
+/** @defgroup FLASH_Error_Code FLASH Error Code
+  * @brief    FLASH Error Code
+  * @{
+  */
+#define HAL_FLASH_ERROR_NONE         0x00000000U               /*!< No error                              */
+
+#define HAL_FLASH_ERROR_WRP          FLASH_FLAG_WRPERR         /*!< Write Protection Error                */
+#define HAL_FLASH_ERROR_PGS          FLASH_FLAG_PGSERR         /*!< Program Sequence Error                */
+#define HAL_FLASH_ERROR_STRB         FLASH_FLAG_STRBERR        /*!< Strobe Error                          */
+#define HAL_FLASH_ERROR_INC          FLASH_FLAG_INCERR         /*!< Inconsistency Error                   */
+#if defined (FLASH_SR_OPERR)
+#define HAL_FLASH_ERROR_OPE          FLASH_FLAG_OPERR          /*!< Operation Error                       */
+#endif /* FLASH_SR_OPERR */
+#define HAL_FLASH_ERROR_RDP          FLASH_FLAG_RDPERR         /*!< Read Protection Error                 */
+#define HAL_FLASH_ERROR_RDS          FLASH_FLAG_RDSERR         /*!< Read Secured Error                    */
+#define HAL_FLASH_ERROR_SNECC        FLASH_FLAG_SNECCERR       /*!< ECC Single Correction Error           */
+#define HAL_FLASH_ERROR_DBECC        FLASH_FLAG_DBECCERR       /*!< ECC Double Detection Error            */
+#define HAL_FLASH_ERROR_CRCRD        FLASH_FLAG_CRCRDERR       /*!< CRC Read Error                        */
+
+#define HAL_FLASH_ERROR_WRP_BANK1    FLASH_FLAG_WRPERR_BANK1   /*!< Write Protection Error on Bank 1      */
+#define HAL_FLASH_ERROR_PGS_BANK1    FLASH_FLAG_PGSERR_BANK1   /*!< Program Sequence Error on Bank 1      */
+#define HAL_FLASH_ERROR_STRB_BANK1   FLASH_FLAG_STRBERR_BANK1  /*!< Strobe Error on Bank 1                */
+#define HAL_FLASH_ERROR_INC_BANK1    FLASH_FLAG_INCERR_BANK1   /*!< Inconsistency Error on Bank 1         */
+#if defined (FLASH_SR_OPERR)
+#define HAL_FLASH_ERROR_OPE_BANK1    FLASH_FLAG_OPERR_BANK1    /*!< Operation Error on Bank 1             */
+#endif /* FLASH_SR_OPERR */
+#define HAL_FLASH_ERROR_RDP_BANK1    FLASH_FLAG_RDPERR_BANK1   /*!< Read Protection Error on Bank 1       */
+#define HAL_FLASH_ERROR_RDS_BANK1    FLASH_FLAG_RDSERR_BANK1   /*!< Read Secured Error on Bank 1          */
+#define HAL_FLASH_ERROR_SNECC_BANK1  FLASH_FLAG_SNECCERR_BANK1 /*!< ECC Single Correction Error on Bank 1 */
+#define HAL_FLASH_ERROR_DBECC_BANK1  FLASH_FLAG_DBECCERR_BANK1 /*!< ECC Double Detection Error on Bank 1  */
+#define HAL_FLASH_ERROR_CRCRD_BANK1  FLASH_FLAG_CRCRDERR_BANK1 /*!< CRC Read Error on Bank1               */
+
+#define HAL_FLASH_ERROR_WRP_BANK2    FLASH_FLAG_WRPERR_BANK2    /*!< Write Protection Error on Bank 2      */
+#define HAL_FLASH_ERROR_PGS_BANK2    FLASH_FLAG_PGSERR_BANK2    /*!< Program Sequence Error on Bank 2      */
+#define HAL_FLASH_ERROR_STRB_BANK2   FLASH_FLAG_STRBERR_BANK2   /*!< Strobe Error on Bank 2                */
+#define HAL_FLASH_ERROR_INC_BANK2    FLASH_FLAG_INCERR_BANK2    /*!< Inconsistency Error on Bank 2         */
+#if defined (FLASH_SR_OPERR)
+#define HAL_FLASH_ERROR_OPE_BANK2    FLASH_FLAG_OPERR_BANK2     /*!< Operation Error on Bank 2             */
+#endif /* FLASH_SR_OPERR */
+#define HAL_FLASH_ERROR_RDP_BANK2    FLASH_FLAG_RDPERR_BANK2    /*!< Read Protection Error on Bank 2       */
+#define HAL_FLASH_ERROR_RDS_BANK2    FLASH_FLAG_RDSERR_BANK2    /*!< Read Secured Error on Bank 2          */
+#define HAL_FLASH_ERROR_SNECC_BANK2  FLASH_FLAG_SNECCERR_BANK2  /*!< ECC Single Correction Error on Bank 2 */
+#define HAL_FLASH_ERROR_DBECC_BANK2  FLASH_FLAG_DBECCERR_BANK2  /*!< ECC Double Detection Error on Bank 2  */
+#define HAL_FLASH_ERROR_CRCRD_BANK2  FLASH_FLAG_CRCRDERR_BANK2  /*!< CRC Read Error on Bank2               */
+
+#define HAL_FLASH_ERROR_OB_CHANGE    FLASH_OPTSR_OPTCHANGEERR   /*!< Option Byte Change Error              */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */
+#define FLASH_TYPEPROGRAM_FLASHWORD  0x01U        /*!< Program a flash word at a specified address */
+#if defined (FLASH_OPTCR_PG_OTP)
+#define FLASH_TYPEPROGRAM_OTPWORD    0x02U        /*!< Program an OTP word at a specified address  */
+#endif /* FLASH_OPTCR_PG_OTP */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */
+#define FLASH_FLAG_BSY                     FLASH_SR_BSY             /*!< FLASH Busy flag */
+#define FLASH_FLAG_WBNE                    FLASH_SR_WBNE            /*!< Write Buffer Not Empty flag */
+#define FLASH_FLAG_QW                      FLASH_SR_QW              /*!< Wait Queue on flag */
+#define FLASH_FLAG_CRC_BUSY                FLASH_SR_CRC_BUSY        /*!< CRC Busy flag */
+#define FLASH_FLAG_EOP                     FLASH_SR_EOP             /*!< End Of Program on flag */
+#define FLASH_FLAG_WRPERR                  FLASH_SR_WRPERR          /*!< Write Protection Error on flag */
+#define FLASH_FLAG_PGSERR                  FLASH_SR_PGSERR          /*!< Program Sequence Error on flag */
+#define FLASH_FLAG_STRBERR                 FLASH_SR_STRBERR         /*!< Strobe Error flag */
+#define FLASH_FLAG_INCERR                  FLASH_SR_INCERR          /*!< Inconsistency Error on flag */
+#if defined (FLASH_SR_OPERR)
+#define FLASH_FLAG_OPERR                   FLASH_SR_OPERR           /*!< Operation Error on flag */
+#endif /* FLASH_SR_OPERR */
+#define FLASH_FLAG_RDPERR                  FLASH_SR_RDPERR          /*!< Read Protection Error on flag */
+#define FLASH_FLAG_RDSERR                  FLASH_SR_RDSERR          /*!< Read Secured Error on flag */
+#define FLASH_FLAG_SNECCERR                FLASH_SR_SNECCERR        /*!< Single ECC Error Correction on flag */
+#define FLASH_FLAG_DBECCERR                FLASH_SR_DBECCERR        /*!< Double Detection ECC Error on flag */
+#define FLASH_FLAG_CRCEND                  FLASH_SR_CRCEND          /*!< CRC End of Calculation flag */
+#define FLASH_FLAG_CRCRDERR                FLASH_SR_CRCRDERR        /*!< CRC Read Error on bank flag */
+
+#define FLASH_FLAG_BSY_BANK1               FLASH_SR_BSY             /*!< FLASH Bank 1 Busy flag */
+#define FLASH_FLAG_WBNE_BANK1              FLASH_SR_WBNE            /*!< Write Buffer Not Empty on Bank 1 flag */
+#define FLASH_FLAG_QW_BANK1                FLASH_SR_QW              /*!< Wait Queue on Bank 1 flag */
+#define FLASH_FLAG_CRC_BUSY_BANK1          FLASH_SR_CRC_BUSY        /*!< CRC Busy on Bank 1 flag */
+#define FLASH_FLAG_EOP_BANK1               FLASH_SR_EOP             /*!< End Of Program on Bank 1 flag */
+#define FLASH_FLAG_WRPERR_BANK1            FLASH_SR_WRPERR          /*!< Write Protection Error on Bank 1 flag */
+#define FLASH_FLAG_PGSERR_BANK1            FLASH_SR_PGSERR          /*!< Program Sequence Error on Bank 1 flag */
+#define FLASH_FLAG_STRBERR_BANK1           FLASH_SR_STRBERR         /*!< Strobe Error on Bank 1 flag */
+#define FLASH_FLAG_INCERR_BANK1            FLASH_SR_INCERR          /*!< Inconsistency Error on Bank 1 flag */
+#if defined (FLASH_SR_OPERR)
+#define FLASH_FLAG_OPERR_BANK1             FLASH_SR_OPERR           /*!< Operation Error on Bank 1 flag */
+#endif /* FLASH_SR_OPERR */
+#define FLASH_FLAG_RDPERR_BANK1            FLASH_SR_RDPERR          /*!< Read Protection Error on Bank 1 flag */
+#define FLASH_FLAG_RDSERR_BANK1            FLASH_SR_RDSERR          /*!< Read Secured Error on Bank 1 flag */
+#define FLASH_FLAG_SNECCERR_BANK1          FLASH_SR_SNECCERR        /*!< Single ECC Error Correction on Bank 1 flag */
+#define FLASH_FLAG_DBECCERR_BANK1          FLASH_SR_DBECCERR        /*!< Double Detection ECC Error on Bank 1 flag */
+#define FLASH_FLAG_CRCEND_BANK1            FLASH_SR_CRCEND          /*!< CRC End of Calculation on Bank 1 flag */
+#define FLASH_FLAG_CRCRDERR_BANK1          FLASH_SR_CRCRDERR        /*!< CRC Read error on Bank 1 flag */
+
+#if defined (FLASH_SR_OPERR)
+#define FLASH_FLAG_ALL_ERRORS_BANK1       (FLASH_FLAG_WRPERR_BANK1   | FLASH_FLAG_PGSERR_BANK1   | \
+                                           FLASH_FLAG_STRBERR_BANK1  | FLASH_FLAG_INCERR_BANK1   | \
+                                           FLASH_FLAG_OPERR_BANK1    | FLASH_FLAG_RDPERR_BANK1   | \
+                                           FLASH_FLAG_RDSERR_BANK1   | FLASH_FLAG_SNECCERR_BANK1 | \
+                                           FLASH_FLAG_DBECCERR_BANK1 | FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */
+#else
+#define FLASH_FLAG_ALL_ERRORS_BANK1       (FLASH_FLAG_WRPERR_BANK1   | FLASH_FLAG_PGSERR_BANK1   | \
+                                           FLASH_FLAG_STRBERR_BANK1  | FLASH_FLAG_INCERR_BANK1   | \
+                                           FLASH_FLAG_RDPERR_BANK1   | FLASH_FLAG_RDSERR_BANK1   | \
+                                           FLASH_FLAG_SNECCERR_BANK1 | FLASH_FLAG_DBECCERR_BANK1 | \
+                                           FLASH_FLAG_CRCRDERR_BANK1) /*!< All Bank 1 error flags */
+#endif /* FLASH_SR_OPERR */
+
+#define FLASH_FLAG_ALL_BANK1              (FLASH_FLAG_BSY_BANK1      | FLASH_FLAG_WBNE_BANK1     | \
+                                           FLASH_FLAG_QW_BANK1       | FLASH_FLAG_CRC_BUSY_BANK1 | \
+                                           FLASH_FLAG_EOP_BANK1      | FLASH_FLAG_CRCEND_BANK1   | \
+                                           FLASH_FLAG_ALL_ERRORS_BANK1) /*!< All Bank 1 flags */
+
+#define FLASH_FLAG_BSY_BANK2               (FLASH_SR_BSY      | 0x80000000U)        /*!< FLASH Bank 2 Busy flag */
+#define FLASH_FLAG_WBNE_BANK2              (FLASH_SR_WBNE     | 0x80000000U)        /*!< Write Buffer Not Empty on Bank 2 flag */
+#define FLASH_FLAG_QW_BANK2                (FLASH_SR_QW       | 0x80000000U)        /*!< Wait Queue on Bank 2 flag */
+#define FLASH_FLAG_CRC_BUSY_BANK2          (FLASH_SR_CRC_BUSY | 0x80000000U)        /*!< CRC Busy on Bank 2 flag */
+#define FLASH_FLAG_EOP_BANK2               (FLASH_SR_EOP      | 0x80000000U)        /*!< End Of Program on Bank 2 flag */
+#define FLASH_FLAG_WRPERR_BANK2            (FLASH_SR_WRPERR   | 0x80000000U)        /*!< Write Protection Error on Bank 2 flag */
+#define FLASH_FLAG_PGSERR_BANK2            (FLASH_SR_PGSERR   | 0x80000000U)        /*!< Program Sequence Error on Bank 2 flag */
+#define FLASH_FLAG_STRBERR_BANK2           (FLASH_SR_STRBERR  | 0x80000000U)        /*!< Strobe Error on Bank 2 flag */
+#define FLASH_FLAG_INCERR_BANK2            (FLASH_SR_INCERR   | 0x80000000U)        /*!< Inconsistency Error on Bank 2 flag */
+#if defined (FLASH_SR_OPERR)
+#define FLASH_FLAG_OPERR_BANK2             (FLASH_SR_OPERR    | 0x80000000U)        /*!< Operation Error on Bank 2 flag */
+#endif /* FLASH_SR_OPERR */
+#define FLASH_FLAG_RDPERR_BANK2            (FLASH_SR_RDPERR   | 0x80000000U)        /*!< Read Protection Error on Bank 2 flag */
+#define FLASH_FLAG_RDSERR_BANK2            (FLASH_SR_RDSERR   | 0x80000000U)        /*!< Read Secured Error on Bank 2 flag */
+#define FLASH_FLAG_SNECCERR_BANK2          (FLASH_SR_SNECCERR | 0x80000000U)        /*!< Single ECC Error Correction on Bank 2 flag */
+#define FLASH_FLAG_DBECCERR_BANK2          (FLASH_SR_DBECCERR | 0x80000000U)        /*!< Double Detection ECC Error on Bank 2 flag */
+#define FLASH_FLAG_CRCEND_BANK2            (FLASH_SR_CRCEND   | 0x80000000U)        /*!< CRC End of Calculation on Bank 2 flag */
+#define FLASH_FLAG_CRCRDERR_BANK2          (FLASH_SR_CRCRDERR | 0x80000000U)        /*!< CRC Read error on Bank 2 flag */
+
+#if defined (FLASH_SR_OPERR)
+#define FLASH_FLAG_ALL_ERRORS_BANK2       (FLASH_FLAG_WRPERR_BANK2   | FLASH_FLAG_PGSERR_BANK2   | \
+                                           FLASH_FLAG_STRBERR_BANK2  | FLASH_FLAG_INCERR_BANK2   | \
+                                           FLASH_FLAG_OPERR_BANK2    | FLASH_FLAG_RDPERR_BANK2   | \
+                                           FLASH_FLAG_RDSERR_BANK2   | FLASH_FLAG_SNECCERR_BANK2 | \
+                                           FLASH_FLAG_DBECCERR_BANK2 | FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */
+#else
+#define FLASH_FLAG_ALL_ERRORS_BANK2       (FLASH_FLAG_WRPERR_BANK2   | FLASH_FLAG_PGSERR_BANK2   | \
+                                           FLASH_FLAG_STRBERR_BANK2  | FLASH_FLAG_INCERR_BANK2   | \
+                                           FLASH_FLAG_RDPERR_BANK2   | FLASH_FLAG_RDSERR_BANK2   | \
+                                           FLASH_FLAG_SNECCERR_BANK2 | FLASH_FLAG_DBECCERR_BANK2 | \
+                                           FLASH_FLAG_CRCRDERR_BANK2) /*!< All Bank 2 error flags */
+#endif /* FLASH_SR_OPERR */
+
+#define FLASH_FLAG_ALL_BANK2              (FLASH_FLAG_BSY_BANK2      | FLASH_FLAG_WBNE_BANK2     | \
+                                           FLASH_FLAG_QW_BANK2       | FLASH_FLAG_CRC_BUSY_BANK2 | \
+                                           FLASH_FLAG_EOP_BANK2      | FLASH_FLAG_CRCEND_BANK2   | \
+                                           FLASH_FLAG_ALL_ERRORS_BANK2) /*!< All Bank 2 flags */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */
+#define FLASH_IT_EOP_BANK1                  FLASH_CR_EOPIE       /*!< End of FLASH Bank 1 Operation Interrupt source */
+#define FLASH_IT_WRPERR_BANK1               FLASH_CR_WRPERRIE    /*!< Write Protection Error on Bank 1 Interrupt source */
+#define FLASH_IT_PGSERR_BANK1               FLASH_CR_PGSERRIE    /*!< Program Sequence Error on Bank 1 Interrupt source */
+#define FLASH_IT_STRBERR_BANK1              FLASH_CR_STRBERRIE   /*!< Strobe Error on Bank 1 Interrupt source */
+#define FLASH_IT_INCERR_BANK1               FLASH_CR_INCERRIE    /*!< Inconsistency Error on Bank 1 Interrupt source */
+#if defined (FLASH_CR_OPERRIE)
+#define FLASH_IT_OPERR_BANK1                FLASH_CR_OPERRIE     /*!< Operation Error on Bank 1 Interrupt source */
+#endif /* FLASH_CR_OPERRIE */
+#define FLASH_IT_RDPERR_BANK1               FLASH_CR_RDPERRIE    /*!< Read protection Error on Bank 1 Interrupt source */
+#define FLASH_IT_RDSERR_BANK1               FLASH_CR_RDSERRIE    /*!< Read Secured Error on Bank 1 Interrupt source */
+#define FLASH_IT_SNECCERR_BANK1             FLASH_CR_SNECCERRIE  /*!< Single ECC Error Correction on Bank 1 Interrupt source */
+#define FLASH_IT_DBECCERR_BANK1             FLASH_CR_DBECCERRIE  /*!< Double Detection ECC Error on Bank 1 Interrupt source */
+#define FLASH_IT_CRCEND_BANK1               FLASH_CR_CRCENDIE    /*!< CRC End on Bank 1 Interrupt source */
+#define FLASH_IT_CRCRDERR_BANK1             FLASH_CR_CRCRDERRIE  /*!< CRC Read error on Bank 1 Interrupt source */
+
+#if defined (FLASH_CR_OPERRIE)
+#define FLASH_IT_ALL_BANK1                 (FLASH_IT_EOP_BANK1       | FLASH_IT_WRPERR_BANK1    | \
+                                            FLASH_IT_PGSERR_BANK1    | FLASH_IT_STRBERR_BANK1   | \
+                                            FLASH_IT_INCERR_BANK1    | FLASH_IT_OPERR_BANK1     | \
+                                            FLASH_IT_RDPERR_BANK1    | FLASH_IT_RDSERR_BANK1    | \
+                                            FLASH_IT_SNECCERR_BANK1  | FLASH_IT_DBECCERR_BANK1  | \
+                                            FLASH_IT_CRCEND_BANK1    | FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */
+#else
+#define FLASH_IT_ALL_BANK1                 (FLASH_IT_EOP_BANK1       | FLASH_IT_WRPERR_BANK1    | \
+                                            FLASH_IT_PGSERR_BANK1    | FLASH_IT_STRBERR_BANK1   | \
+                                            FLASH_IT_INCERR_BANK1    | FLASH_IT_RDPERR_BANK1    | \
+                                            FLASH_IT_RDSERR_BANK1    | FLASH_IT_SNECCERR_BANK1  | \
+                                            FLASH_IT_DBECCERR_BANK1  | FLASH_IT_CRCEND_BANK1    | \
+                                            FLASH_IT_CRCRDERR_BANK1) /*!< All Bank 1 Interrupt sources */
+#endif /* FLASH_CR_OPERRIE */
+
+#define FLASH_IT_EOP_BANK2                 (FLASH_CR_EOPIE      | 0x80000000U)  /*!< End of FLASH Bank 2 Operation Interrupt source */
+#define FLASH_IT_WRPERR_BANK2              (FLASH_CR_WRPERRIE   | 0x80000000U)  /*!< Write Protection Error on Bank 2 Interrupt source */
+#define FLASH_IT_PGSERR_BANK2              (FLASH_CR_PGSERRIE   | 0x80000000U)  /*!< Program Sequence Error on Bank 2 Interrupt source */
+#define FLASH_IT_STRBERR_BANK2             (FLASH_CR_STRBERRIE  | 0x80000000U)  /*!< Strobe Error on Bank 2 Interrupt source */
+#define FLASH_IT_INCERR_BANK2              (FLASH_CR_INCERRIE   | 0x80000000U)  /*!< Inconsistency Error on Bank 2 Interrupt source */
+#if defined (FLASH_CR_OPERRIE)
+#define FLASH_IT_OPERR_BANK2               (FLASH_CR_OPERRIE    | 0x80000000U)  /*!< Operation Error on Bank 2 Interrupt source */
+#endif /* FLASH_CR_OPERRIE */
+#define FLASH_IT_RDPERR_BANK2              (FLASH_CR_RDPERRIE   | 0x80000000U)  /*!< Read protection Error on Bank 2 Interrupt source */
+#define FLASH_IT_RDSERR_BANK2              (FLASH_CR_RDSERRIE   | 0x80000000U)  /*!< Read Secured Error on Bank 2 Interrupt source */
+#define FLASH_IT_SNECCERR_BANK2            (FLASH_CR_SNECCERRIE | 0x80000000U)  /*!< Single ECC Error Correction on Bank 2 Interrupt source */
+#define FLASH_IT_DBECCERR_BANK2            (FLASH_CR_DBECCERRIE | 0x80000000U)  /*!< Double Detection ECC Error on Bank 2 Interrupt source */
+#define FLASH_IT_CRCEND_BANK2              (FLASH_CR_CRCENDIE   | 0x80000000U)  /*!< CRC End on Bank 2 Interrupt source */
+#define FLASH_IT_CRCRDERR_BANK2            (FLASH_CR_CRCRDERRIE | 0x80000000U)  /*!< CRC Read Error on Bank 2 Interrupt source */
+
+#if defined (FLASH_CR_OPERRIE)
+#define FLASH_IT_ALL_BANK2                 (FLASH_IT_EOP_BANK2       | FLASH_IT_WRPERR_BANK2    | \
+                                            FLASH_IT_PGSERR_BANK2    | FLASH_IT_STRBERR_BANK2   | \
+                                            FLASH_IT_INCERR_BANK2    | FLASH_IT_OPERR_BANK2     | \
+                                            FLASH_IT_RDPERR_BANK2    | FLASH_IT_RDSERR_BANK2    | \
+                                            FLASH_IT_SNECCERR_BANK2  | FLASH_IT_DBECCERR_BANK2  | \
+                                            FLASH_IT_CRCEND_BANK2    | FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */
+#else
+#define FLASH_IT_ALL_BANK2                 (FLASH_IT_EOP_BANK2       | FLASH_IT_WRPERR_BANK2    | \
+                                            FLASH_IT_PGSERR_BANK2    | FLASH_IT_STRBERR_BANK2   | \
+                                            FLASH_IT_INCERR_BANK2    | FLASH_IT_RDPERR_BANK2    | \
+                                            FLASH_IT_RDSERR_BANK2    | FLASH_IT_SNECCERR_BANK2  | \
+                                            FLASH_IT_DBECCERR_BANK2  | FLASH_IT_CRCEND_BANK2    | \
+                                            FLASH_IT_CRCRDERR_BANK2) /*!< All Bank 2 Interrupt sources */
+#endif /* FLASH_CR_OPERRIE */
+/**
+  * @}
+  */
+
+#if defined (FLASH_CR_PSIZE)
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+  * @{
+  */
+#define FLASH_PSIZE_BYTE           0x00000000U       /*!< Flash program/erase by 8 bits  */
+#define FLASH_PSIZE_HALF_WORD      FLASH_CR_PSIZE_0  /*!< Flash program/erase by 16 bits */
+#define FLASH_PSIZE_WORD           FLASH_CR_PSIZE_1  /*!< Flash program/erase by 32 bits */
+#define FLASH_PSIZE_DOUBLE_WORD    FLASH_CR_PSIZE    /*!< Flash program/erase by 64 bits */
+/**
+  * @}
+  */
+#endif /* FLASH_CR_PSIZE */
+
+
+/** @defgroup FLASH_Keys FLASH Keys
+  * @{
+  */
+#define FLASH_KEY1                 0x45670123U
+#define FLASH_KEY2                 0xCDEF89ABU
+#define FLASH_OPT_KEY1             0x08192A3BU
+#define FLASH_OPT_KEY2             0x4C5D6E7FU
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Sectors FLASH Sectors
+  * @{
+  */
+#define FLASH_SECTOR_0             0U       /*!< Sector Number 0   */
+#define FLASH_SECTOR_1             1U       /*!< Sector Number 1   */
+#define FLASH_SECTOR_2             2U       /*!< Sector Number 2   */
+#define FLASH_SECTOR_3             3U       /*!< Sector Number 3   */
+#define FLASH_SECTOR_4             4U       /*!< Sector Number 4   */
+#define FLASH_SECTOR_5             5U       /*!< Sector Number 5   */
+#define FLASH_SECTOR_6             6U       /*!< Sector Number 6   */
+#define FLASH_SECTOR_7             7U       /*!< Sector Number 7   */
+#if (FLASH_SECTOR_TOTAL == 128)
+#define FLASH_SECTOR_8             8U       /*!< Sector Number 8   */
+#define FLASH_SECTOR_9             9U       /*!< Sector Number 9   */
+#define FLASH_SECTOR_10            10U      /*!< Sector Number 10  */
+#define FLASH_SECTOR_11            11U      /*!< Sector Number 11  */
+#define FLASH_SECTOR_12            12U      /*!< Sector Number 12  */
+#define FLASH_SECTOR_13            13U      /*!< Sector Number 13  */
+#define FLASH_SECTOR_14            14U      /*!< Sector Number 14  */
+#define FLASH_SECTOR_15            15U      /*!< Sector Number 15  */
+#define FLASH_SECTOR_16            16U      /*!< Sector Number 16  */
+#define FLASH_SECTOR_17            17U      /*!< Sector Number 17  */
+#define FLASH_SECTOR_18            18U      /*!< Sector Number 18  */
+#define FLASH_SECTOR_19            19U      /*!< Sector Number 19  */
+#define FLASH_SECTOR_20            20U      /*!< Sector Number 20  */
+#define FLASH_SECTOR_21            21U      /*!< Sector Number 21  */
+#define FLASH_SECTOR_22            22U      /*!< Sector Number 22  */
+#define FLASH_SECTOR_23            23U      /*!< Sector Number 23  */
+#define FLASH_SECTOR_24            24U      /*!< Sector Number 24  */
+#define FLASH_SECTOR_25            25U      /*!< Sector Number 25  */
+#define FLASH_SECTOR_26            26U      /*!< Sector Number 26  */
+#define FLASH_SECTOR_27            27U      /*!< Sector Number 27  */
+#define FLASH_SECTOR_28            28U      /*!< Sector Number 28  */
+#define FLASH_SECTOR_29            29U      /*!< Sector Number 29  */
+#define FLASH_SECTOR_30            30U      /*!< Sector Number 30  */
+#define FLASH_SECTOR_31            31U      /*!< Sector Number 31  */
+#define FLASH_SECTOR_32            32U      /*!< Sector Number 32  */
+#define FLASH_SECTOR_33            33U      /*!< Sector Number 33  */
+#define FLASH_SECTOR_34            34U      /*!< Sector Number 34  */
+#define FLASH_SECTOR_35            35U      /*!< Sector Number 35  */
+#define FLASH_SECTOR_36            36U      /*!< Sector Number 36  */
+#define FLASH_SECTOR_37            37U      /*!< Sector Number 37  */
+#define FLASH_SECTOR_38            38U      /*!< Sector Number 38  */
+#define FLASH_SECTOR_39            39U      /*!< Sector Number 39  */
+#define FLASH_SECTOR_40            40U      /*!< Sector Number 40  */
+#define FLASH_SECTOR_41            41U      /*!< Sector Number 41  */
+#define FLASH_SECTOR_42            42U      /*!< Sector Number 42  */
+#define FLASH_SECTOR_43            43U      /*!< Sector Number 43  */
+#define FLASH_SECTOR_44            44U      /*!< Sector Number 44  */
+#define FLASH_SECTOR_45            45U      /*!< Sector Number 45  */
+#define FLASH_SECTOR_46            46U      /*!< Sector Number 46  */
+#define FLASH_SECTOR_47            47U      /*!< Sector Number 47  */
+#define FLASH_SECTOR_48            48U      /*!< Sector Number 48  */
+#define FLASH_SECTOR_49            49U      /*!< Sector Number 49  */
+#define FLASH_SECTOR_50            50U      /*!< Sector Number 50  */
+#define FLASH_SECTOR_51            51U      /*!< Sector Number 51  */
+#define FLASH_SECTOR_52            52U      /*!< Sector Number 52  */
+#define FLASH_SECTOR_53            53U      /*!< Sector Number 53  */
+#define FLASH_SECTOR_54            54U      /*!< Sector Number 54  */
+#define FLASH_SECTOR_55            55U      /*!< Sector Number 55  */
+#define FLASH_SECTOR_56            56U      /*!< Sector Number 56  */
+#define FLASH_SECTOR_57            57U      /*!< Sector Number 57  */
+#define FLASH_SECTOR_58            58U      /*!< Sector Number 58  */
+#define FLASH_SECTOR_59            59U      /*!< Sector Number 59  */
+#define FLASH_SECTOR_60            60U      /*!< Sector Number 60  */
+#define FLASH_SECTOR_61            61U      /*!< Sector Number 61  */
+#define FLASH_SECTOR_62            62U      /*!< Sector Number 62  */
+#define FLASH_SECTOR_63            63U      /*!< Sector Number 63  */
+#define FLASH_SECTOR_64            64U      /*!< Sector Number 64  */
+#define FLASH_SECTOR_65            65U      /*!< Sector Number 65  */
+#define FLASH_SECTOR_66            66U      /*!< Sector Number 66  */
+#define FLASH_SECTOR_67            67U      /*!< Sector Number 67  */
+#define FLASH_SECTOR_68            68U      /*!< Sector Number 68  */
+#define FLASH_SECTOR_69            69U      /*!< Sector Number 69  */
+#define FLASH_SECTOR_70            70U      /*!< Sector Number 70  */
+#define FLASH_SECTOR_71            71U      /*!< Sector Number 71  */
+#define FLASH_SECTOR_72            72U      /*!< Sector Number 72  */
+#define FLASH_SECTOR_73            73U      /*!< Sector Number 73  */
+#define FLASH_SECTOR_74            74U      /*!< Sector Number 74  */
+#define FLASH_SECTOR_75            75U      /*!< Sector Number 75  */
+#define FLASH_SECTOR_76            76U      /*!< Sector Number 76  */
+#define FLASH_SECTOR_77            77U      /*!< Sector Number 77  */
+#define FLASH_SECTOR_78            78U      /*!< Sector Number 78  */
+#define FLASH_SECTOR_79            79U      /*!< Sector Number 79  */
+#define FLASH_SECTOR_80            80U      /*!< Sector Number 80  */
+#define FLASH_SECTOR_81            81U      /*!< Sector Number 81  */
+#define FLASH_SECTOR_82            82U      /*!< Sector Number 82  */
+#define FLASH_SECTOR_83            83U      /*!< Sector Number 83  */
+#define FLASH_SECTOR_84            84U      /*!< Sector Number 84  */
+#define FLASH_SECTOR_85            85U      /*!< Sector Number 85  */
+#define FLASH_SECTOR_86            86U      /*!< Sector Number 86  */
+#define FLASH_SECTOR_87            87U      /*!< Sector Number 87  */
+#define FLASH_SECTOR_88            88U      /*!< Sector Number 88  */
+#define FLASH_SECTOR_89            89U      /*!< Sector Number 89  */
+#define FLASH_SECTOR_90            90U      /*!< Sector Number 90  */
+#define FLASH_SECTOR_91            91U      /*!< Sector Number 91  */
+#define FLASH_SECTOR_92            92U      /*!< Sector Number 92  */
+#define FLASH_SECTOR_93            93U      /*!< Sector Number 93  */
+#define FLASH_SECTOR_94            94U      /*!< Sector Number 94  */
+#define FLASH_SECTOR_95            95U      /*!< Sector Number 95  */
+#define FLASH_SECTOR_96            96U      /*!< Sector Number 96  */
+#define FLASH_SECTOR_97            97U      /*!< Sector Number 97  */
+#define FLASH_SECTOR_98            98U      /*!< Sector Number 98  */
+#define FLASH_SECTOR_99            99U      /*!< Sector Number 99  */
+#define FLASH_SECTOR_100           100U     /*!< Sector Number 100 */
+#define FLASH_SECTOR_101           101U     /*!< Sector Number 101 */
+#define FLASH_SECTOR_102           102U     /*!< Sector Number 102 */
+#define FLASH_SECTOR_103           103U     /*!< Sector Number 103 */
+#define FLASH_SECTOR_104           104U     /*!< Sector Number 104 */
+#define FLASH_SECTOR_105           105U     /*!< Sector Number 105 */
+#define FLASH_SECTOR_106           106U     /*!< Sector Number 106 */
+#define FLASH_SECTOR_107           107U     /*!< Sector Number 107 */
+#define FLASH_SECTOR_108           108U     /*!< Sector Number 108 */
+#define FLASH_SECTOR_109           109U     /*!< Sector Number 109 */
+#define FLASH_SECTOR_110           110U     /*!< Sector Number 110 */
+#define FLASH_SECTOR_111           111U     /*!< Sector Number 111 */
+#define FLASH_SECTOR_112           112U     /*!< Sector Number 112 */
+#define FLASH_SECTOR_113           113U     /*!< Sector Number 113 */
+#define FLASH_SECTOR_114           114U     /*!< Sector Number 114 */
+#define FLASH_SECTOR_115           115U     /*!< Sector Number 115 */
+#define FLASH_SECTOR_116           116U     /*!< Sector Number 116 */
+#define FLASH_SECTOR_117           117U     /*!< Sector Number 117 */
+#define FLASH_SECTOR_118           118U     /*!< Sector Number 118 */
+#define FLASH_SECTOR_119           119U     /*!< Sector Number 119 */
+#define FLASH_SECTOR_120           120U     /*!< Sector Number 120 */
+#define FLASH_SECTOR_121           121U     /*!< Sector Number 121 */
+#define FLASH_SECTOR_122           122U     /*!< Sector Number 122 */
+#define FLASH_SECTOR_123           123U     /*!< Sector Number 123 */
+#define FLASH_SECTOR_124           124U     /*!< Sector Number 124 */
+#define FLASH_SECTOR_125           125U     /*!< Sector Number 125 */
+#define FLASH_SECTOR_126           126U     /*!< Sector Number 126 */
+#define FLASH_SECTOR_127           127U     /*!< Sector Number 127 */
+#endif /* FLASH_SECTOR_TOTAL == 128 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+  * @{
+  */
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__: FLASH Latency
+  *         The value of this parameter depend on device used within the same series
+  * @retval none
+  */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
+                  MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency
+  *          The value of this parameter depend on device used within the same series
+  */
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt
+  *   In case of Bank 1 This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP_BANK1       : End of FLASH Bank 1 Operation Interrupt source
+  *     @arg FLASH_IT_WRPERR_BANK1    : Write Protection Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_PGSERR_BANK1    : Program Sequence Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_STRBERR_BANK1   : Strobe Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_INCERR_BANK1    : Inconsistency Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_OPERR_BANK1     : Operation Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_RDPERR_BANK1    : Read protection Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_RDSERR_BANK1    : Read secure Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_SNECCERR_BANK1  : Single ECC Error Correction on Bank 1 Interrupt source
+  *     @arg FLASH_IT_DBECCERR_BANK1  : Double Detection ECC Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_CRCEND_BANK1    : CRC End on Bank 1 Interrupt source
+  *     @arg FLASH_IT_CRCRDERR_BANK1  : CRC Read error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_ALL_BANK1       : All Bank 1 Interrupt sources
+  *
+  *   In case of Bank 2, this parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP_BANK2       : End of FLASH Bank 2 Operation Interrupt source
+  *     @arg FLASH_IT_WRPERR_BANK2    : Write Protection Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_PGSERR_BANK2    : Program Sequence Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_STRBERR_BANK2   : Strobe Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_INCERR_BANK2    : Inconsistency Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_OPERR_BANK2     : Operation Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_RDPERR_BANK2    : Read protection Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_RDSERR_BANK2    : Read secure Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_SNECCERR_BANK2  : Single ECC Error Correction on Bank 2 Interrupt source
+  *     @arg FLASH_IT_DBECCERR_BANK2  : Double Detection ECC Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_CRCEND_BANK2    : CRC End on Bank 2 Interrupt source
+  *     @arg FLASH_IT_CRCRDERR_BANK2  : CRC Read error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_ALL_BANK2       : All Bank 2 Interrupt sources
+  * @retval none
+  */
+
+#define __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__)      (FLASH->CR1 |= (__INTERRUPT__))
+
+#define __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__)      (FLASH->CR2 |= ((__INTERRUPT__) & 0x7FFFFFFFU))
+
+#if defined (DUAL_BANK)
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)    (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \
+                                                 __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__) : \
+                                                 __HAL_FLASH_ENABLE_IT_BANK2(__INTERRUPT__))
+#else
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)    __HAL_FLASH_ENABLE_IT_BANK1(__INTERRUPT__)
+#endif /* DUAL_BANK */
+
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt
+  *   In case of Bank 1 This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP_BANK1       : End of FLASH Bank 1 Operation Interrupt source
+  *     @arg FLASH_IT_WRPERR_BANK1    : Write Protection Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_PGSERR_BANK1    : Program Sequence Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_STRBERR_BANK1   : Strobe Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_INCERR_BANK1    : Inconsistency Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_OPERR_BANK1     : Operation Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_RDPERR_BANK1    : Read protection Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_RDSERR_BANK1    : Read secure Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_SNECCERR_BANK1  : Single ECC Error Correction on Bank 1 Interrupt source
+  *     @arg FLASH_IT_DBECCERR_BANK1  : Double Detection ECC Error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_CRCEND_BANK1    : CRC End on Bank 1 Interrupt source
+  *     @arg FLASH_IT_CRCRDERR_BANK1  : CRC Read error on Bank 1 Interrupt source
+  *     @arg FLASH_IT_ALL_BANK1       : All Bank 1 Interrupt sources
+  *
+  *   In case of Bank 2, this parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP_BANK2       : End of FLASH Bank 2 Operation Interrupt source
+  *     @arg FLASH_IT_WRPERR_BANK2    : Write Protection Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_PGSERR_BANK2    : Program Sequence Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_STRBERR_BANK2   : Strobe Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_INCERR_BANK2    : Inconsistency Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_OPERR_BANK2     : Operation Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_RDPERR_BANK2    : Read protection Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_RDSERR_BANK2    : Read secure Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_SNECCERR_BANK2  : Single ECC Error Correction on Bank 2 Interrupt source
+  *     @arg FLASH_IT_DBECCERR_BANK2  : Double Detection ECC Error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_CRCEND_BANK2    : CRC End on Bank 2 Interrupt source
+  *     @arg FLASH_IT_CRCRDERR_BANK2  : CRC Read error on Bank 2 Interrupt source
+  *     @arg FLASH_IT_ALL_BANK2       : All Bank 2 Interrupt sources
+  * @retval none
+  */
+
+#define __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__)  (FLASH->CR1 &= ~(uint32_t)(__INTERRUPT__))
+
+#define __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__)  (FLASH->CR2 &= ~(uint32_t)((__INTERRUPT__) & 0x7FFFFFFFU))
+
+#if defined (DUAL_BANK)
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (IS_FLASH_IT_BANK1(__INTERRUPT__) ? \
+                                                __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__) : \
+                                                __HAL_FLASH_DISABLE_IT_BANK2(__INTERRUPT__))
+#else
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  __HAL_FLASH_DISABLE_IT_BANK1(__INTERRUPT__)
+#endif /* DUAL_BANK */
+
+
+/**
+  * @brief  Checks whether the specified FLASH flag is set or not.
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *   In case of Bank 1 This parameter can be one of the following values :
+  *     @arg FLASH_FLAG_BSY_BANK1      : FLASH Bank 1 Busy flag
+  *     @arg FLASH_FLAG_WBNE_BANK1     : Write Buffer Not Empty on Bank 1 flag
+  *     @arg FLASH_FLAG_QW_BANK1       : Wait Queue on Bank 1 flag
+  *     @arg FLASH_FLAG_CRC_BUSY_BANK1 : CRC module is working on Bank 1 flag
+  *     @arg FLASH_FLAG_EOP_BANK1      : End Of Program on Bank 1 flag
+  *     @arg FLASH_FLAG_WRPERR_BANK1   : Write Protection Error on Bank 1 flag
+  *     @arg FLASH_FLAG_PGSERR_BANK1   : Program Sequence Error on Bank 1 flag
+  *     @arg FLASH_FLAG_STRBER_BANK1   : Program Alignment Error on Bank 1 flag
+  *     @arg FLASH_FLAG_INCERR_BANK1   : Inconsistency Error on Bank 1 flag
+  *     @arg FLASH_FLAG_OPERR_BANK1    : Operation Error on Bank 1 flag
+  *     @arg FLASH_FLAG_RDPERR_BANK1   : Read Protection Error on Bank 1 flag
+  *     @arg FLASH_FLAG_RDSERR_BANK1   : Read secure  Error on Bank 1 flag
+  *     @arg FLASH_FLAG_SNECCE_BANK1   : Single ECC Error Correction on Bank 1 flag
+  *     @arg FLASH_FLAG_DBECCE_BANK1   : Double Detection ECC Error on Bank 1 flag
+  *     @arg FLASH_FLAG_CRCEND_BANK1   : CRC End on Bank 1 flag
+  *     @arg FLASH_FLAG_CRCRDERR_BANK1 : CRC Read error on Bank 1 flag
+  *
+  *   In case of Bank 2 This parameter can be one of the following values :
+  *     @arg FLASH_FLAG_BSY_BANK2      : FLASH Bank 2 Busy flag
+  *     @arg FLASH_FLAG_WBNE_BANK2     : Write Buffer Not Empty on Bank 2 flag
+  *     @arg FLASH_FLAG_QW_BANK2       : Wait Queue on Bank 2 flag
+  *     @arg FLASH_FLAG_CRC_BUSY_BANK2 : CRC module is working on Bank 2 flag
+  *     @arg FLASH_FLAG_EOP_BANK2      : End Of Program on Bank 2 flag
+  *     @arg FLASH_FLAG_WRPERR_BANK2   : Write Protection Error on Bank 2 flag
+  *     @arg FLASH_FLAG_PGSERR_BANK2   : Program Sequence Error on Bank 2 flag
+  *     @arg FLASH_FLAG_STRBER_BANK2   : Program Alignment Error on Bank 2 flag
+  *     @arg FLASH_FLAG_INCERR_BANK2   : Inconsistency Error on Bank 2 flag
+  *     @arg FLASH_FLAG_OPERR_BANK2    : Operation Error on Bank 2 flag
+  *     @arg FLASH_FLAG_RDPERR_BANK2   : Read Protection Error on Bank 2 flag
+  *     @arg FLASH_FLAG_RDSERR_BANK2   : Read secure  Error on Bank 2 flag
+  *     @arg FLASH_FLAG_SNECCE_BANK2   : Single ECC Error Correction on Bank 2 flag
+  *     @arg FLASH_FLAG_DBECCE_BANK2   : Double Detection ECC Error on Bank 2 flag
+  *     @arg FLASH_FLAG_CRCEND_BANK2   : CRC End on Bank 2 flag
+  *     @arg FLASH_FLAG_CRCRDERR_BANK2 : CRC Read error on Bank 2 flag
+  * @retval The new state of FLASH_FLAG (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG_BANK1(__FLAG__)     (READ_BIT(FLASH->SR1, (__FLAG__)) == (__FLAG__))
+
+#define __HAL_FLASH_GET_FLAG_BANK2(__FLAG__)     (READ_BIT(FLASH->SR2, ((__FLAG__) & 0x7FFFFFFFU)) == (((__FLAG__) & 0x7FFFFFFFU)))
+
+#if defined (DUAL_BANK)
+#define __HAL_FLASH_GET_FLAG(__FLAG__)           (IS_FLASH_FLAG_BANK1(__FLAG__) ?  __HAL_FLASH_GET_FLAG_BANK1(__FLAG__) : \
+                                                  __HAL_FLASH_GET_FLAG_BANK2(__FLAG__))
+#else
+#define __HAL_FLASH_GET_FLAG(__FLAG__)           __HAL_FLASH_GET_FLAG_BANK1(__FLAG__)
+#endif /* DUAL_BANK */
+
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *    In case of Bank 1, this parameter can be any combination of the following values:
+  *     @arg FLASH_FLAG_EOP_BANK1        : End Of Program on Bank 1 flag
+  *     @arg FLASH_FLAG_WRPERR_BANK1     : Write Protection Error on Bank 1 flag
+  *     @arg FLASH_FLAG_PGSERR_BANK1     : Program Sequence Error on Bank 1 flag
+  *     @arg FLASH_FLAG_STRBER_BANK1     : Program Alignment Error on Bank 1 flag
+  *     @arg FLASH_FLAG_INCERR_BANK1     : Inconsistency Error on Bank 1 flag
+  *     @arg FLASH_FLAG_OPERR_BANK1      : Operation Error on Bank 1 flag
+  *     @arg FLASH_FLAG_RDPERR_BANK1     : Read Protection Error on Bank 1 flag
+  *     @arg FLASH_FLAG_RDSERR_BANK1     : Read secure  Error on Bank 1 flag
+  *     @arg FLASH_FLAG_SNECCE_BANK1     : Single ECC Error Correction on Bank 1 flag
+  *     @arg FLASH_FLAG_DBECCE_BANK1     : Double Detection ECC Error on Bank 1 flag
+  *     @arg FLASH_FLAG_CRCEND_BANK1     : CRC End on Bank 1 flag
+  *     @arg FLASH_FLAG_CRCRDERR_BANK1   : CRC Read error on Bank 1 flag
+  *     @arg FLASH_FLAG_ALL_ERRORS_BANK1 : All Bank 1 error flags
+  *     @arg FLASH_FLAG_ALL_BANK1        : All Bank 1 flags
+  *
+  *   In case of Bank 2, this parameter can be any combination of the following values :
+  *     @arg FLASH_FLAG_EOP_BANK2        : End Of Program on Bank 2 flag
+  *     @arg FLASH_FLAG_WRPERR_BANK2     : Write Protection Error on Bank 2 flag
+  *     @arg FLASH_FLAG_PGSERR_BANK2     : Program Sequence Error on Bank 2 flag
+  *     @arg FLASH_FLAG_STRBER_BANK2     : Program Alignment Error on Bank 2 flag
+  *     @arg FLASH_FLAG_INCERR_BANK2     : Inconsistency Error on Bank 2 flag
+  *     @arg FLASH_FLAG_OPERR_BANK2      : Operation Error on Bank 2 flag
+  *     @arg FLASH_FLAG_RDPERR_BANK2     : Read Protection Error on Bank 2 flag
+  *     @arg FLASH_FLAG_RDSERR_BANK2     : Read secure  Error on Bank 2 flag
+  *     @arg FLASH_FLAG_SNECCE_BANK2     : Single ECC Error Correction on Bank 2 flag
+  *     @arg FLASH_FLAG_DBECCE_BANK2     : Double Detection ECC Error on Bank 2 flag
+  *     @arg FLASH_FLAG_CRCEND_BANK2     : CRC End on Bank 2 flag
+  *     @arg FLASH_FLAG_CRCRDERR_BANK2   : CRC Read error on Bank 2 flag
+  *     @arg FLASH_FLAG_ALL_ERRORS_BANK2 : All Bank 2 error flags
+  *     @arg FLASH_FLAG_ALL_BANK2        : All Bank 2 flags
+  * @retval none
+  */
+
+#define __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__)    WRITE_REG(FLASH->CCR1, (__FLAG__))
+
+#define __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__)    WRITE_REG(FLASH->CCR2, ((__FLAG__) & 0x7FFFFFFFU))
+
+#if defined (DUAL_BANK)
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)         (IS_FLASH_FLAG_BANK1(__FLAG__) ?  __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__) : \
+                                                  __HAL_FLASH_CLEAR_FLAG_BANK2(__FLAG__))
+#else
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)         __HAL_FLASH_CLEAR_FLAG_BANK1(__FLAG__)
+#endif /* DUAL_BANK */
+
+/**
+  * @}
+  */
+
+/* Include FLASH HAL Extension module */
+#include "stm32h7xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t FlashAddress, uint32_t DataAddress);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+  * @{
+  */
+extern FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+#if defined (FLASH_OPTCR_PG_OTP)
+#define IS_FLASH_TYPEPROGRAM(VALUE)      (((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD) || \
+                                          ((VALUE) == FLASH_TYPEPROGRAM_OTPWORD))
+#else
+#define IS_FLASH_TYPEPROGRAM(VALUE)      ((VALUE) == FLASH_TYPEPROGRAM_FLASHWORD)
+#endif /* FLASH_OPTCR_PG_OTP */
+
+#define IS_FLASH_IT_BANK1(IT)            (((IT) & FLASH_IT_ALL_BANK1) == (IT))
+#if defined (DUAL_BANK)
+#define IS_FLASH_IT_BANK2(IT)            (((IT) & FLASH_IT_ALL_BANK2) == (IT))
+#endif /* DUAL_BANK */
+
+#define IS_FLASH_FLAG_BANK1(FLAG)        (((FLAG) & FLASH_FLAG_ALL_BANK1) == (FLAG))
+#if defined (DUAL_BANK)
+#define IS_FLASH_FLAG_BANK2(FLAG)        (((FLAG) & FLASH_FLAG_ALL_BANK2) == (FLAG))
+#endif /* DUAL_BANK */
+
+#if defined (DUAL_BANK)
+#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) < FLASH_BANK2_BASE))
+#define IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) (((ADDRESS) >= FLASH_BANK2_BASE ) && ((ADDRESS) <= FLASH_END))
+#else
+#define IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) (((ADDRESS) >= FLASH_BANK1_BASE) && ((ADDRESS) <= FLASH_END))
+#endif /* DUAL_BANK */
+
+#if defined (DUAL_BANK)
+#if defined (FLASH_OPTCR_PG_OTP)
+#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)   (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)       (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
+                                                 IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS) || \
+                                                 IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS))
+#else
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)       (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
+                                                 IS_FLASH_PROGRAM_ADDRESS_BANK2(ADDRESS))
+#endif /* FLASH_OPTCR_PG_OTP */
+#else
+#if defined (FLASH_OPTCR_PG_OTP)
+#define IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS)   (((ADDRESS) >= 0x08FFF000U) && ((ADDRESS) <= 0x08FFF3FFU))
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)       (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS) || \
+                                                 IS_FLASH_PROGRAM_ADDRESS_OTP(ADDRESS))
+#else
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS)       (IS_FLASH_PROGRAM_ADDRESS_BANK1(ADDRESS))
+#endif /* FLASH_OPTCR_PG_OTP */
+#endif /* DUAL_BANK */
+
+#define IS_BOOT_ADDRESS(ADDRESS)         ((ADDRESS) <= (0x3FFF0000U))
+
+#if defined (DUAL_BANK)
+#define IS_FLASH_BANK(BANK)              (((BANK) == FLASH_BANK_1)  || \
+                                          ((BANK) == FLASH_BANK_2)  || \
+                                          ((BANK) == FLASH_BANK_BOTH))
+#define IS_FLASH_BANK_EXCLUSIVE(BANK)    (((BANK) == FLASH_BANK_1)  || \
+                                          ((BANK) == FLASH_BANK_2))
+#else
+#define IS_FLASH_BANK(BANK)              ((BANK) == FLASH_BANK_1)
+#define IS_FLASH_BANK_EXCLUSIVE(BANK)    ((BANK) == FLASH_BANK_1)
+#endif /* DUAL_BANK */
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private functions
+  * @{
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout, uint32_t Bank);
+HAL_StatusTypeDef FLASH_OB_WaitForLastOperation(uint32_t Timeout);
+HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout, uint32_t Bank);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_fmac.h

@@ -0,0 +1,696 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_fmac.h
+  * @author  MCD Application Team
+  * @brief   This file contains all the functions prototypes for the FMAC firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_FMAC_H
+#define STM32H7xx_HAL_FMAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined(FMAC)
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FMAC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FMAC_Exported_Types FMAC Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FMAC HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_FMAC_STATE_RESET       = 0x00U,            /*!< FMAC not yet initialized or disabled                           */
+  HAL_FMAC_STATE_READY       = 0x20U,            /*!< FMAC initialized and ready for use                             */
+  HAL_FMAC_STATE_BUSY        = 0x24U,            /*!< FMAC internal process is ongoing                               */
+  HAL_FMAC_STATE_BUSY_RD     = 0x25U,            /*!< FMAC reading configuration is ongoing                          */
+  HAL_FMAC_STATE_BUSY_WR     = 0x26U,            /*!< FMAC writing configuration is ongoing                          */
+  HAL_FMAC_STATE_TIMEOUT     = 0xA0U,            /*!< FMAC in Timeout state                                          */
+  HAL_FMAC_STATE_ERROR       = 0xE0U             /*!< FMAC in Error state                                            */
+} HAL_FMAC_StateTypeDef;
+
+/**
+  * @brief  FMAC Handle Structure definition
+  */
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+typedef struct __FMAC_HandleTypeDef
+#else
+typedef struct
+#endif  /* USE_HAL_FMAC_REGISTER_CALLBACKS */
+{
+  FMAC_TypeDef               *Instance;          /*!< Register base address */
+
+  uint32_t                   FilterParam;        /*!< Filter configuration (operation and parameters).
+                                                      Set to 0 if no valid configuration was applied. */
+
+  uint8_t                    InputAccess;       /*!< Access to the input buffer (internal memory area): DMA, IT, Polling, None.
+                                                     This parameter can be a value of @ref FMAC_Buffer_Access. */
+
+  uint8_t                    OutputAccess;      /*!< Access to the output buffer (internal memory area): DMA, IT, Polling, None.
+                                                     This parameter can be a value of @ref FMAC_Buffer_Access. */
+
+  int16_t                    *pInput;            /*!< Pointer to FMAC input data buffer */
+
+  uint16_t                   InputCurrentSize;   /*!< Number of the input elements already written into FMAC */
+
+  uint16_t                   *pInputSize;        /*!< Number of input elements to write (memory allocated to pInput).
+                                                      In case of early interruption of the filter operation, its value will be updated. */
+
+  int16_t                    *pOutput;           /*!< Pointer to FMAC output data buffer */
+
+  uint16_t                   OutputCurrentSize;  /*!< Number of the output elements already read from FMAC */
+
+  uint16_t                   *pOutputSize;       /*!< Number of output elements to read (memory allocated to pOutput).
+                                                      In case of early interruption of the filter operation, its value will be updated. */
+
+  DMA_HandleTypeDef          *hdmaIn;            /*!< FMAC peripheral input data DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmaOut;           /*!< FMAC peripheral output data DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmaPreload;       /*!< FMAC peripheral preloaded data (X1, X2 and Y) DMA handle parameters */
+
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+  void (* ErrorCallback)(struct __FMAC_HandleTypeDef *hfmac);               /*!< FMAC error callback                  */
+
+  void (* HalfGetDataCallback)(struct __FMAC_HandleTypeDef *hfmac);         /*!< FMAC get half data callback          */
+
+  void (* GetDataCallback)(struct __FMAC_HandleTypeDef *hfmac);             /*!< FMAC get data callback               */
+
+  void (* HalfOutputDataReadyCallback)(struct __FMAC_HandleTypeDef *hfmac); /*!< FMAC half output data ready callback */
+
+  void (* OutputDataReadyCallback)(struct __FMAC_HandleTypeDef *hfmac);     /*!< FMAC output data ready callback      */
+
+  void (* FilterConfigCallback)(struct __FMAC_HandleTypeDef *hfmac);        /*!< FMAC filter configuration callback   */
+
+  void (* FilterPreloadCallback)(struct __FMAC_HandleTypeDef *hfmac);       /*!< FMAC filter preload callback         */
+
+  void (* MspInitCallback)(struct __FMAC_HandleTypeDef *hfmac);             /*!< FMAC Msp Init callback               */
+
+  void (* MspDeInitCallback)(struct __FMAC_HandleTypeDef *hfmac);           /*!< FMAC Msp DeInit callback             */
+
+#endif /* (USE_HAL_FMAC_REGISTER_CALLBACKS) */
+
+  HAL_LockTypeDef            Lock;               /*!< FMAC locking object */
+
+  __IO HAL_FMAC_StateTypeDef State;              /*!< FMAC state related to global handle management
+                                                      This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
+
+  __IO HAL_FMAC_StateTypeDef RdState;            /*!< FMAC state related to read operations (access to Y buffer)
+                                                      This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
+
+  __IO HAL_FMAC_StateTypeDef WrState;            /*!< FMAC state related to write operations (access to X1 buffer)
+                                                      This parameter can be a value of @ref HAL_FMAC_StateTypeDef */
+
+  __IO uint32_t              ErrorCode;          /*!< FMAC peripheral error code
+                                                      This parameter can be a value of @ref FMAC_Error_Code */
+
+} FMAC_HandleTypeDef;
+
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  FMAC Callback ID structure definition
+  */
+typedef enum
+{
+  HAL_FMAC_ERROR_CB_ID                  = 0x00U, /*!< FMAC error callback ID                  */
+  HAL_FMAC_HALF_GET_DATA_CB_ID          = 0x01U, /*!< FMAC get half data callback ID          */
+  HAL_FMAC_GET_DATA_CB_ID               = 0x02U, /*!< FMAC get data callback ID               */
+  HAL_FMAC_HALF_OUTPUT_DATA_READY_CB_ID = 0x03U, /*!< FMAC half output data ready callback ID */
+  HAL_FMAC_OUTPUT_DATA_READY_CB_ID      = 0x04U, /*!< FMAC output data ready callback ID      */
+  HAL_FMAC_FILTER_CONFIG_CB_ID          = 0x05U, /*!< FMAC filter configuration callback ID   */
+  HAL_FMAC_FILTER_PRELOAD_CB_ID         = 0x06U, /*!< FMAC filter preload callback ID         */
+
+  HAL_FMAC_MSPINIT_CB_ID                = 0x07U, /*!< FMAC MspInit callback ID                */
+  HAL_FMAC_MSPDEINIT_CB_ID              = 0x08U, /*!< FMAC MspDeInit callback ID              */
+} HAL_FMAC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL FMAC Callback pointer definition
+  */
+typedef  void (*pFMAC_CallbackTypeDef)(FMAC_HandleTypeDef *hfmac);  /*!< pointer to an FMAC callback function */
+
+#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  FMAC Filter Configuration Structure definition
+  */
+typedef struct
+{
+  uint8_t                    InputBaseAddress;  /*!< Base address of the input buffer (X1) within the internal memory (0x00 to 0xFF).
+                                                     Ignored if InputBufferSize is set to 0 (previous configuration kept).
+                                                     NB: the buffers can overlap or even coincide exactly. */
+
+  uint8_t                    InputBufferSize;   /*!< Number of 16-bit addresses allocated to the input buffer (including the optional "headroom").
+                                                     0 if a previous configuration should be kept. */
+
+  uint32_t                   InputThreshold;    /*!< Input threshold: the buffer full flag will be set if the number of free spaces
+                                                     in the buffer is inferior to this threshold.
+                                                     This parameter can be a value of @ref FMAC_Data_Buffer_Threshold. */
+
+  uint8_t                    CoeffBaseAddress;  /*!< Base address of the coefficient buffer (X2) within the internal memory (0x00 to 0xFF).
+                                                     Ignored if CoeffBufferSize is set to 0 (previous configuration kept).
+                                                     NB: the buffers can overlap or even coincide exactly. */
+
+  uint8_t                    CoeffBufferSize;   /*!< Number of 16-bit addresses allocated to the coefficient buffer.
+                                                     0 if a previous configuration should be kept. */
+
+  uint8_t                    OutputBaseAddress; /*!< Base address of the output buffer (Y) within the internal memory (0x00 to 0xFF).
+                                                     Ignored if OuputBufferSize is set to 0 (previous configuration kept).
+                                                     NB: the buffers can overlap or even coincide exactly. */
+
+  uint8_t                    OutputBufferSize;  /*!< Number of 16-bit addresses allocated to the output buffer (including the optional "headroom").
+                                                     0 if a previous configuration should be kept. */
+
+  uint32_t                   OutputThreshold;   /*!< Output threshold: the buffer empty flag will be set if the number of unread values
+                                                     in the buffer is inferior to this threshold.
+                                                     This parameter can be a value of @ref FMAC_Data_Buffer_Threshold. */
+
+  int16_t                    *pCoeffA;          /*!< [IIR only] Initialization of the coefficient vector A.
+                                                     If not needed, it should be set to NULL. */
+
+  uint8_t                    CoeffASize;        /*!< Size of the coefficient vector A. */
+
+  int16_t                    *pCoeffB;          /*!< Initialization of the coefficient vector B.
+                                                     If not needed (re-use of a previously loaded buffer), it should be set to NULL. */
+
+  uint8_t                    CoeffBSize;        /*!< Size of the coefficient vector B. */
+
+  uint8_t                    InputAccess;       /*!< Access to the input buffer (internal memory area): DMT, IT, Polling, None.
+                                                     This parameter can be a value of @ref FMAC_Buffer_Access. */
+
+  uint8_t                    OutputAccess;      /*!< Access to the output buffer (internal memory area): DMA, IT, Polling, None.
+                                                     This parameter can be a value of @ref FMAC_Buffer_Access. */
+
+  uint32_t                   Clip;              /*!< Enable or disable the clipping feature (wrapping when the q1.15 range is exceeded).
+                                                     This parameter can be a value of @ref FMAC_Clip_State. */
+
+  uint32_t                   Filter;            /*!< Filter type.
+                                                     This parameter can be a value of @ref FMAC_Functions (filter related values). */
+
+  uint8_t                    P;                 /*!< Parameter P (vector length, number of filter taps, etc.). */
+
+  uint8_t                    Q;                 /*!< Parameter Q (vector length, etc.). Ignored if not needed. */
+
+  uint8_t                    R;                 /*!< Parameter R (gain, etc.). Ignored if not needed. */
+
+} FMAC_FilterConfigTypeDef;
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+
+/** @defgroup FMAC_Exported_Constants FMAC Exported Constants
+  * @{
+  */
+
+/** @defgroup FMAC_Error_Code FMAC Error code
+  * @{
+  */
+#define HAL_FMAC_ERROR_NONE                0x00000000UL /*!< No error               */
+#define HAL_FMAC_ERROR_SAT                 0x00000001UL /*!< Saturation error       */
+#define HAL_FMAC_ERROR_UNFL                0x00000002UL /*!< Underflow error        */
+#define HAL_FMAC_ERROR_OVFL                0x00000004UL /*!< Overflow error         */
+#define HAL_FMAC_ERROR_DMA                 0x00000008UL /*!< DMA error              */
+#define HAL_FMAC_ERROR_RESET               0x00000010UL /*!< Reset error            */
+#define HAL_FMAC_ERROR_PARAM               0x00000020UL /*!< Parameter error        */
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+#define HAL_FMAC_ERROR_INVALID_CALLBACK    0x00000040UL /*!< Invalid Callback error */
+#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
+#define HAL_FMAC_ERROR_TIMEOUT             0x00000080UL /*!< Timeout error          */
+
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Functions FMAC Functions
+  * @{
+  */
+#define FMAC_FUNC_LOAD_X1                  ((uint32_t)(FMAC_PARAM_FUNC_0))                                        /*!< Load X1 buffer                            */
+#define FMAC_FUNC_LOAD_X2                  ((uint32_t)(FMAC_PARAM_FUNC_1))                                        /*!< Load X2 buffer                            */
+#define FMAC_FUNC_LOAD_Y                   ((uint32_t)(FMAC_PARAM_FUNC_1 | FMAC_PARAM_FUNC_0))                    /*!< Load Y buffer                             */
+#define FMAC_FUNC_CONVO_FIR                ((uint32_t)(FMAC_PARAM_FUNC_3))                                        /*!< Convolution (FIR filter)                  */
+#define FMAC_FUNC_IIR_DIRECT_FORM_1        ((uint32_t)(FMAC_PARAM_FUNC_3 | FMAC_PARAM_FUNC_0))                    /*!< IIR filter (direct form 1)                */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Data_Buffer_Threshold FMAC Data Buffer Threshold
+  * @{
+  * @note     This parameter sets a watermark for buffer full (input) or buffer empty (output).
+  */
+#define FMAC_THRESHOLD_1                   0x00000000UL    /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 1.
+                                                                Output: Buffer empty flag set if the number of unread values in the buffer is less than 1. */
+#define FMAC_THRESHOLD_2                   0x01000000UL    /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 2.
+                                                                Output: Buffer empty flag set if the number of unread values in the buffer is less than 2. */
+#define FMAC_THRESHOLD_4                   0x02000000UL    /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 4.
+                                                                Output: Buffer empty flag set if the number of unread values in the buffer is less than 4. */
+#define FMAC_THRESHOLD_8                   0x03000000UL    /*!< Input: Buffer full flag set if the number of free spaces in the buffer is less than 8.
+                                                                Output: Buffer empty flag set if the number of unread values in the buffer is less than 8. */
+#define FMAC_THRESHOLD_NO_VALUE            0xFFFFFFFFUL    /*!< The configured threshold value shouldn't be changed */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Buffer_Access FMAC Buffer Access
+  * @{
+  */
+#define FMAC_BUFFER_ACCESS_NONE            0x00U           /*!< Buffer handled by an external IP (ADC for instance) */
+#define FMAC_BUFFER_ACCESS_DMA             0x01U           /*!< Buffer accessed through the FMAC DMA */
+#define FMAC_BUFFER_ACCESS_POLLING         0x02U           /*!< Buffer accessed through polling */
+#define FMAC_BUFFER_ACCESS_IT              0x03U           /*!< Buffer accessed through interruptions */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Clip_State FMAC Clip State
+  * @{
+  */
+#define FMAC_CLIP_DISABLED                 0x00000000UL    /*!< Clipping disabled */
+#define FMAC_CLIP_ENABLED                  FMAC_CR_CLIPEN  /*!< Clipping enabled */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Flags  FMAC status flags
+  * @{
+  */
+#define FMAC_FLAG_YEMPTY                   FMAC_SR_YEMPTY  /*!< Y Buffer Empty Flag */
+#define FMAC_FLAG_X1FULL                   FMAC_SR_X1FULL  /*!< X1 Buffer Full Flag */
+#define FMAC_FLAG_OVFL                     FMAC_SR_OVFL    /*!< Overflow Error Flag */
+#define FMAC_FLAG_UNFL                     FMAC_SR_UNFL    /*!< Underflow Error Flag */
+#define FMAC_FLAG_SAT                      FMAC_SR_SAT     /*!< Saturation Error Flag (this helps in debugging a filter) */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Interrupts_Enable FMAC Interrupts Enable bit
+  * @{
+  */
+#define FMAC_IT_RIEN                       FMAC_CR_RIEN    /*!< Read Interrupt Enable */
+#define FMAC_IT_WIEN                       FMAC_CR_WIEN    /*!< Write Interrupt Enable */
+#define FMAC_IT_OVFLIEN                    FMAC_CR_OVFLIEN /*!< Overflow Error Interrupt Enable */
+#define FMAC_IT_UNFLIEN                    FMAC_CR_UNFLIEN /*!< Underflow Error Interrupt Enable */
+#define FMAC_IT_SATIEN                     FMAC_CR_SATIEN  /*!< Saturation Error Interrupt Enable (this helps in debugging a filter) */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_DMAR DMA Read Request Enable bit
+  * @{
+  */
+#define FMAC_DMA_REN                       FMAC_CR_DMAREN  /*!< DMA Read Requests Enable */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_DMAW DMA Write Request Enable bit
+  * @{
+  */
+#define FMAC_DMA_WEN                       FMAC_CR_DMAWEN  /*!< DMA Write Channel Enable */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_DMAS DMA START bit
+  * @{
+  */
+#define FMAC_START                         FMAC_PARAM_START  /*!< DMA Start */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_TimeOut_Value    FMAC polling-based communications time-out value
+  * @{
+  */
+#define HAL_FMAC_TIMEOUT_VALUE             1000UL          /*!< FMAC polling-based communications time-out value */
+/**
+  * @}
+  */
+
+/** @defgroup FMAC_Reset_TimeOut_Value    FMAC reset time-out value
+  * @{
+  */
+#define HAL_FMAC_RESET_TIMEOUT_VALUE       500UL           /*!< FMAC reset time-out value */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FMAC_Exported_Macros FMAC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset FMAC handle state.
+  * @param  __HANDLE__ FMAC handle.
+  * @retval None
+  */
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+#define __HAL_FMAC_RESET_HANDLE_STATE(__HANDLE__) do{                                           \
+                                                      (__HANDLE__)->State = HAL_FMAC_STATE_RESET; \
+                                                      (__HANDLE__)->MspInitCallback = NULL;       \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                    } while(0U)
+#else
+#define __HAL_FMAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMAC_STATE_RESET)
+#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the FMAC interrupt when result is ready
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __INTERRUPT__ FMAC Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg @ref FMAC_IT_RIEN    Read interrupt enable
+  *            @arg @ref FMAC_IT_WIEN    Write interrupt enable
+  *            @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
+  *            @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
+  *            @arg @ref FMAC_IT_SATIEN  Saturation error interrupt enable (this helps in debugging a filter)
+  * @retval None
+  */
+#define __HAL_FMAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) \
+  (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the FMAC interrupt
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __INTERRUPT__ FMAC Interrupt.
+  *         This parameter can be one of the following values:
+  *            @arg @ref FMAC_IT_RIEN    Read interrupt enable
+  *            @arg @ref FMAC_IT_WIEN    Write interrupt enable
+  *            @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
+  *            @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
+  *            @arg @ref FMAC_IT_SATIEN  Saturation error interrupt enable (this helps in debugging a filter)
+  * @retval None
+  */
+#define __HAL_FMAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) \
+  (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief  Check whether the specified FMAC interrupt occurred or not.
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __INTERRUPT__ FMAC interrupt to check.
+  *         This parameter can be one of the following values:
+  *            @arg @ref FMAC_FLAG_YEMPTY Y Buffer Empty Flag
+  *            @arg @ref FMAC_FLAG_X1FULL X1 Buffer Full Flag
+  *            @arg @ref FMAC_FLAG_OVFL   Overflow Error Flag
+  *            @arg @ref FMAC_FLAG_UNFL   Underflow Error Flag
+  *            @arg @ref FMAC_FLAG_SAT    Saturation Error Flag
+  * @retval SET (interrupt occurred) or RESET (interrupt did not occurred)
+  */
+#define __HAL_FMAC_GET_IT(__HANDLE__, __INTERRUPT__) \
+  (((__HANDLE__)->Instance->SR) &= ~(__INTERRUPT__))
+
+/** @brief  Clear specified FMAC interrupt status. Dummy macro as the
+            interrupt status flags are read-only.
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __INTERRUPT__ FMAC interrupt to clear.
+  * @retval None
+  */
+#define __HAL_FMAC_CLEAR_IT(__HANDLE__, __INTERRUPT__)   /* Dummy macro */
+
+/** @brief  Check whether the specified FMAC status flag is set or not.
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __FLAG__ FMAC flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg @ref FMAC_FLAG_YEMPTY Y Buffer Empty Flag
+  *            @arg @ref FMAC_FLAG_X1FULL X1 Buffer Full Flag
+  *            @arg @ref FMAC_FLAG_OVFL   Overflow Error Flag
+  *            @arg @ref FMAC_FLAG_UNFL   Underflow Error Flag
+  *            @arg @ref FMAC_FLAG_SAT    Saturation error Flag
+  * @retval SET (flag is set) or RESET (flag is reset)
+  */
+#define __HAL_FMAC_GET_FLAG(__HANDLE__, __FLAG__) \
+  ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear specified FMAC status flag. Dummy macro as no
+            flag can be cleared.
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __FLAG__ FMAC flag to clear.
+  * @retval None
+  */
+#define __HAL_FMAC_CLEAR_FLAG(__HANDLE__, __FLAG__)     /* Dummy macro */
+
+/** @brief  Check whether the specified FMAC interrupt is enabled or not.
+  * @param  __HANDLE__ FMAC handle.
+  * @param  __INTERRUPT__ FMAC interrupt to check.
+  *         This parameter can be one of the following values:
+  *            @arg @ref FMAC_IT_RIEN    Read interrupt enable
+  *            @arg @ref FMAC_IT_WIEN    Write interrupt enable
+  *            @arg @ref FMAC_IT_OVFLIEN Overflow error interrupt enable
+  *            @arg @ref FMAC_IT_UNFLIEN Underflow error interrupt enable
+  *            @arg @ref FMAC_IT_SATIEN  Saturation error interrupt enable (this helps in debugging a filter)
+  * @retval FlagStatus
+  */
+#define __HAL_FMAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+  (((__HANDLE__)->Instance->CR) & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup  FMAC_Private_Macros
+  * @{
+  */
+
+/**
+  * @brief  Verify the FMAC function.
+  * @param  __FUNCTION__ ID of the function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_FMAC_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1)                         || \
+                                        ((__FUNCTION__) == FMAC_FUNC_LOAD_X2)                         || \
+                                        ((__FUNCTION__) == FMAC_FUNC_LOAD_Y)                          || \
+                                        ((__FUNCTION__) == FMAC_FUNC_CONVO_FIR)                       || \
+                                        ((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1))
+
+/**
+  * @brief  Verify the FMAC load function.
+  * @param  __FUNCTION__ ID of the load function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_FMAC_LOAD_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1)                    || \
+                                             ((__FUNCTION__) == FMAC_FUNC_LOAD_X2)                    || \
+                                             ((__FUNCTION__) == FMAC_FUNC_LOAD_Y))
+
+/**
+  * @brief  Verify the FMAC load function.
+  * @param  __FUNCTION__ ID of the load function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_FMAC_N_LOAD_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_LOAD_X1)                  || \
+                                               ((__FUNCTION__) == FMAC_FUNC_LOAD_Y))
+
+/**
+  * @brief  Verify the FMAC load function.
+  * @param  __FUNCTION__ ID of the load function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_FMAC_N_M_LOAD_FUNCTION(__FUNCTION__) ((__FUNCTION__) == FMAC_FUNC_LOAD_X2)
+
+/**
+  * @brief  Verify the FMAC filter function.
+  * @param  __FUNCTION__ ID of the filter function.
+  * @retval SET (__FUNCTION__ is a valid value) or RESET (__FUNCTION__ is invalid)
+  */
+#define IS_FMAC_FILTER_FUNCTION(__FUNCTION__) (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR)                || \
+                                               ((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1))
+
+
+/**
+  * @brief  Verify the FMAC threshold.
+  * @param  __THRESHOLD__ Value of the threshold.
+  * @retval SET (__THRESHOLD__ is a valid value) or RESET (__THRESHOLD__ is invalid)
+  */
+#define IS_FMAC_THRESHOLD(__THRESHOLD__) (((__THRESHOLD__) == FMAC_THRESHOLD_1)                       || \
+                                          ((__THRESHOLD__) == FMAC_THRESHOLD_2)                       || \
+                                          ((__THRESHOLD__) == FMAC_THRESHOLD_4)                       || \
+                                          ((__THRESHOLD__) == FMAC_THRESHOLD_NO_VALUE)                || \
+                                          ((__THRESHOLD__) == FMAC_THRESHOLD_8))
+
+/**
+  * @brief  Verify the FMAC filter parameter P.
+  * @param  __P__ Value of the filter parameter P.
+  * @param  __FUNCTION__ ID of the filter function.
+  * @retval SET (__P__ is a valid value) or RESET (__P__ is invalid)
+  */
+#define IS_FMAC_PARAM_P(__FUNCTION__, __P__) ( (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR)               && \
+                                                (((__P__) >= 2U) && ((__P__) <= 127U)))               || \
+                                               (((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1)       && \
+                                                (((__P__) >= 2U) && ((__P__) <= 64U))) )
+
+/**
+  * @brief  Verify the FMAC filter parameter Q.
+  * @param  __Q__ Value of the filter parameter Q.
+  * @param  __FUNCTION__ ID of the filter function.
+  * @retval SET (__Q__ is a valid value) or RESET (__Q__ is invalid)
+  */
+#define IS_FMAC_PARAM_Q(__FUNCTION__, __Q__) ( ((__FUNCTION__) == FMAC_FUNC_CONVO_FIR)                || \
+                                               (((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1)       && \
+                                                (((__Q__) >= 1U) && ((__Q__) <= 63U))) )
+
+/**
+  * @brief  Verify the FMAC filter parameter R.
+  * @param  __R__ Value of the filter parameter.
+  * @param  __FUNCTION__ ID of the filter function.
+  * @retval SET (__R__ is a valid value) or RESET (__R__ is invalid)
+  */
+#define IS_FMAC_PARAM_R(__FUNCTION__, __R__) ( (((__FUNCTION__) == FMAC_FUNC_CONVO_FIR)               || \
+                                                ((__FUNCTION__) == FMAC_FUNC_IIR_DIRECT_FORM_1))      && \
+                                               ((__R__) <= 7U))
+
+/**
+  * @brief  Verify the FMAC buffer access.
+  * @param  __BUFFER_ACCESS__ Type of access.
+  * @retval SET (__BUFFER_ACCESS__ is a valid value) or RESET (__BUFFER_ACCESS__ is invalid)
+  */
+#define IS_FMAC_BUFFER_ACCESS(__BUFFER_ACCESS__) (((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_NONE)    || \
+                                                  ((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_DMA)     || \
+                                                  ((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_POLLING) || \
+                                                  ((__BUFFER_ACCESS__) == FMAC_BUFFER_ACCESS_IT))
+
+/**
+  * @brief  Verify the FMAC clip feature.
+  * @param  __CLIP_STATE__ Clip state.
+  * @retval SET (__CLIP_STATE__ is a valid value) or RESET (__CLIP_STATE__ is invalid)
+  */
+#define IS_FMAC_CLIP_STATE(__CLIP_STATE__) (((__CLIP_STATE__) == FMAC_CLIP_DISABLED)                  || \
+                                            ((__CLIP_STATE__) == FMAC_CLIP_ENABLED))
+
+/**
+  * @}
+  */
+
+/* Exported functions ------------------------------------------------------- */
+/** @addtogroup FMAC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FMAC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_FMAC_Init(FMAC_HandleTypeDef *hfmac);
+HAL_StatusTypeDef HAL_FMAC_DeInit(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_MspInit(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_MspDeInit(FMAC_HandleTypeDef *hfmac);
+
+#if (USE_HAL_FMAC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_FMAC_RegisterCallback(FMAC_HandleTypeDef *hfmac, HAL_FMAC_CallbackIDTypeDef CallbackID,
+                                            pFMAC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_FMAC_UnRegisterCallback(FMAC_HandleTypeDef *hfmac, HAL_FMAC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_FMAC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup FMAC_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FMAC_FilterConfig(FMAC_HandleTypeDef *hfmac, FMAC_FilterConfigTypeDef *sConfig);
+HAL_StatusTypeDef HAL_FMAC_FilterConfig_DMA(FMAC_HandleTypeDef *hfmac, FMAC_FilterConfigTypeDef *sConfig);
+HAL_StatusTypeDef HAL_FMAC_FilterPreload(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint8_t InputSize,
+                                         int16_t *pOutput, uint8_t OutputSize);
+HAL_StatusTypeDef HAL_FMAC_FilterPreload_DMA(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint8_t InputSize,
+                                             int16_t *pOutput, uint8_t OutputSize);
+HAL_StatusTypeDef HAL_FMAC_FilterStart(FMAC_HandleTypeDef *hfmac, int16_t *pOutput, uint16_t *pOutputSize);
+HAL_StatusTypeDef HAL_FMAC_AppendFilterData(FMAC_HandleTypeDef *hfmac, int16_t *pInput, uint16_t *pInputSize);
+HAL_StatusTypeDef HAL_FMAC_ConfigFilterOutputBuffer(FMAC_HandleTypeDef *hfmac, int16_t *pOutput, uint16_t *pOutputSize);
+HAL_StatusTypeDef HAL_FMAC_PollFilterData(FMAC_HandleTypeDef *hfmac, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMAC_FilterStop(FMAC_HandleTypeDef  *hfmac);
+/**
+  * @}
+  */
+
+/** @addtogroup FMAC_Exported_Functions_Group3
+  * @{
+  */
+/* Callback functions *********************************************************/
+void HAL_FMAC_ErrorCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_HalfGetDataCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_GetDataCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_HalfOutputDataReadyCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_OutputDataReadyCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_FilterConfigCallback(FMAC_HandleTypeDef *hfmac);
+void HAL_FMAC_FilterPreloadCallback(FMAC_HandleTypeDef *hfmac);
+/**
+  * @}
+  */
+
+/** @addtogroup FMAC_Exported_Functions_Group4
+  * @{
+  */
+/* IRQ handler management *****************************************************/
+void HAL_FMAC_IRQHandler(FMAC_HandleTypeDef *hfmac);
+/**
+  * @}
+  */
+
+/** @addtogroup FMAC_Exported_Functions_Group5
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_FMAC_StateTypeDef HAL_FMAC_GetState(FMAC_HandleTypeDef *hfmac);
+uint32_t HAL_FMAC_GetError(FMAC_HandleTypeDef *hfmac);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* FMAC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_FMAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gfxmmu.h

@@ -0,0 +1,453 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_gfxmmu.h
+  * @author  MCD Application Team
+  * @brief   Header file of GFXMMU HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_GFXMMU_H
+#define STM32H7xx_HAL_GFXMMU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined(GFXMMU)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GFXMMU
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GFXMMU_Exported_Types GFXMMU Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  HAL GFXMMU states definition
+  */
+typedef enum
+{
+  HAL_GFXMMU_STATE_RESET = 0x00U, /*!< GFXMMU not initialized */
+  HAL_GFXMMU_STATE_READY = 0x01U, /*!< GFXMMU initialized and ready for use */
+}HAL_GFXMMU_StateTypeDef;
+
+/** 
+  * @brief  GFXMMU buffers structure definition
+  */
+typedef struct
+{
+  uint32_t Buf0Address; /*!< Physical address of buffer 0. */
+  uint32_t Buf1Address; /*!< Physical address of buffer 1. */
+  uint32_t Buf2Address; /*!< Physical address of buffer 2. */
+  uint32_t Buf3Address; /*!< Physical address of buffer 3. */
+}GFXMMU_BuffersTypeDef;
+
+/** 
+  * @brief  GFXMMU cache and pre-fetch structure definition
+  */
+typedef struct
+{
+  FunctionalState Activation;          /*!< Cache and pre-fetch enable/disable.
+                                            @note: All following parameters are usefull only if cache and pre-fetch are enabled. */
+  uint32_t        CacheLock;           /*!< Locking the cache to a buffer.
+                                            This parameter can be a value of @ref GFXMMU_CacheLock. */
+  uint32_t        CacheLockBuffer;     /*!< Buffer on which the cache is locked.
+                                            This parameter can be a value of @ref GFXMMU_CacheLockBuffer.
+                                            @note: Usefull only when lock of the cache is enabled. */
+  uint32_t        CacheForce;          /*!< Forcing the cache regardless MPU attributes.
+                                            This parameter can be a value of @ref GFXMMU_CacheForce.
+                                            @note: Usefull only when lock of the cache is enabled. */
+  uint32_t        OutterBufferability; /*!< Bufferability of an access generated by the GFXMMU cache.
+                                            This parameter can be a value of @ref GFXMMU_OutterBufferability. */
+  uint32_t        OutterCachability;   /*!< Cachability of an access generated by the GFXMMU cache.
+                                            This parameter can be a value of @ref GFXMMU_OutterCachability. */
+  uint32_t        Prefetch;            /*!< Pre-fetch enable/disable.
+                                            This parameter can be a value of @ref GFXMMU_Prefetch. */
+}GFXMMU_CachePrefetchTypeDef;
+
+/** 
+  * @brief  GFXMMU interrupts structure definition
+  */
+typedef struct
+{
+  FunctionalState Activation;     /*!< Interrupts enable/disable */
+  uint32_t        UsedInterrupts; /*!< Interrupts used.
+                                       This parameter can be a values combination of @ref GFXMMU_Interrupts.
+                                       @note: Usefull only when interrupts are enabled. */
+}GFXMMU_InterruptsTypeDef;
+
+/** 
+  * @brief  GFXMMU init structure definition
+  */
+typedef struct
+{
+  uint32_t                    BlocksPerLine; /*!< Number of blocks of 16 bytes per line.
+                                                  This parameter can be a value of @ref GFXMMU_BlocksPerLine. */
+  uint32_t                    DefaultValue;  /*!< Value returned when virtual memory location not physically mapped. */
+  GFXMMU_BuffersTypeDef       Buffers;       /*!< Physical buffers addresses. */
+  GFXMMU_CachePrefetchTypeDef CachePrefetch; /*!< Cache and pre-fetch parameters. */
+  GFXMMU_InterruptsTypeDef    Interrupts;    /*!< Interrupts parameters. */
+}GFXMMU_InitTypeDef;
+
+/** 
+  * @brief  GFXMMU handle structure definition
+  */
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+typedef struct __GFXMMU_HandleTypeDef
+#else
+typedef struct
+#endif
+{
+  GFXMMU_TypeDef          *Instance; /*!< GFXMMU instance */
+  GFXMMU_InitTypeDef      Init;      /*!< GFXMMU init parameters */
+  HAL_GFXMMU_StateTypeDef State;     /*!< GFXMMU state */
+  __IO uint32_t           ErrorCode; /*!< GFXMMU error code */
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+  void (*ErrorCallback)     (struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU error callback */
+  void (*MspInitCallback)   (struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU MSP init callback */
+  void (*MspDeInitCallback) (struct __GFXMMU_HandleTypeDef *hgfxmmu); /*!< GFXMMU MSP de-init callback */
+#endif
+}GFXMMU_HandleTypeDef;
+
+/** 
+  * @brief  GFXMMU LUT line structure definition
+  */
+typedef struct
+{
+  uint32_t LineNumber;        /*!< LUT line number.
+                                   This parameter must be a number between Min_Data = 0 and Max_Data = 1023. */
+  uint32_t LineStatus;        /*!< LUT line enable/disable.
+                                   This parameter can be a value of @ref GFXMMU_LutLineStatus. */
+  uint32_t FirstVisibleBlock; /*!< First visible block on this line.
+                                   This parameter must be a number between Min_Data = 0 and Max_Data = 255. */
+  uint32_t LastVisibleBlock;  /*!< Last visible block on this line.
+                                   This parameter must be a number between Min_Data = 0 and Max_Data = 255. */
+  int32_t  LineOffset;        /*!< Offset of block 0 of the current line in physical buffer.
+                                   This parameter must be a number between Min_Data = -4080 and Max_Data = 4190208.
+                                   @note: Line offset has to be computed with the following formula:
+                                          LineOffset = [(Blocks already used) - (1st visible block)]*BlockSize. */
+}GFXMMU_LutLineTypeDef;
+
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  GFXMMU callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_GFXMMU_ERROR_CB_ID     = 0x00U, /*!< GFXMMU error callback ID */
+  HAL_GFXMMU_MSPINIT_CB_ID   = 0x01U, /*!< GFXMMU MSP init callback ID */
+  HAL_GFXMMU_MSPDEINIT_CB_ID = 0x02U  /*!< GFXMMU MSP de-init callback ID */
+}HAL_GFXMMU_CallbackIDTypeDef;
+
+/**
+  * @brief  GFXMMU callback pointer definition
+  */
+typedef void (*pGFXMMU_CallbackTypeDef)(GFXMMU_HandleTypeDef *hgfxmmu);
+#endif
+
+/**
+  * @}
+  */ 
+/* End of exported types -----------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GFXMMU_Exported_Constants GFXMMU Exported Constants
+  * @{
+  */
+
+/** @defgroup GFXMMU_BlocksPerLine GFXMMU blocks per line
+  * @{
+  */
+#define GFXMMU_256BLOCKS 0x00000000U     /*!< 256 blocks of 16 bytes per line */
+#define GFXMMU_192BLOCKS GFXMMU_CR_192BM /*!< 192 blocks of 16 bytes per line */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_CacheLock GFXMMU cache lock
+  * @{
+  */
+#define GFXMMU_CACHE_LOCK_DISABLE 0x00000000U  /*!< Cache not locked to a buffer */
+#define GFXMMU_CACHE_LOCK_ENABLE  GFXMMU_CR_CL /*!< Cache locked to a buffer */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_CacheLockBuffer GFXMMU cache lock buffer
+  * @{
+  */
+#define GFXMMU_CACHE_LOCK_BUFFER0 0x00000000U     /*!< Cache locked to buffer 0 */
+#define GFXMMU_CACHE_LOCK_BUFFER1 GFXMMU_CR_CLB_0 /*!< Cache locked to buffer 1 */
+#define GFXMMU_CACHE_LOCK_BUFFER2 GFXMMU_CR_CLB_1 /*!< Cache locked to buffer 2 */
+#define GFXMMU_CACHE_LOCK_BUFFER3 GFXMMU_CR_CLB   /*!< Cache locked to buffer 3 */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_CacheForce GFXMMU cache force
+  * @{
+  */
+#define GFXMMU_CACHE_FORCE_DISABLE 0x00000000U  /*!< Caching not forced */
+#define GFXMMU_CACHE_FORCE_ENABLE  GFXMMU_CR_FC /*!< Caching forced */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_OutterBufferability GFXMMU outter bufferability
+  * @{
+  */
+#define GFXMMU_OUTTER_BUFFERABILITY_DISABLE 0x00000000U  /*!< No bufferable */
+#define GFXMMU_OUTTER_BUFFERABILITY_ENABLE  GFXMMU_CR_OB /*!< Bufferable */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_OutterCachability GFXMMU outter cachability
+  * @{
+  */
+#define GFXMMU_OUTTER_CACHABILITY_DISABLE 0x00000000U  /*!< No cachable */
+#define GFXMMU_OUTTER_CACHABILITY_ENABLE  GFXMMU_CR_OC /*!< Cachable */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_Prefetch GFXMMU pre-fetch
+  * @{
+  */
+#define GFXMMU_PREFETCH_DISABLE GFXMMU_CR_PD /*!< Pre-fetch disable */
+#define GFXMMU_PREFETCH_ENABLE  0x00000000U  /*!< Pre-fetch enable */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_Interrupts GFXMMU interrupts
+  * @{
+  */
+#define GFXMMU_AHB_MASTER_ERROR_IT GFXMMU_CR_AMEIE /*!< AHB master error interrupt */
+#define GFXMMU_BUFFER0_OVERFLOW_IT GFXMMU_CR_B0OIE /*!< Buffer 0 overflow interrupt */
+#define GFXMMU_BUFFER1_OVERFLOW_IT GFXMMU_CR_B1OIE /*!< Buffer 1 overflow interrupt */
+#define GFXMMU_BUFFER2_OVERFLOW_IT GFXMMU_CR_B2OIE /*!< Buffer 2 overflow interrupt */
+#define GFXMMU_BUFFER3_OVERFLOW_IT GFXMMU_CR_B3OIE /*!< Buffer 3 overflow interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_Error_Code GFXMMU Error Code
+  * @{
+  */
+#define GFXMMU_ERROR_NONE             0x00000000U    /*!< No error */
+#define GFXMMU_ERROR_BUFFER0_OVERFLOW GFXMMU_SR_B0OF /*!< Buffer 0 overflow */
+#define GFXMMU_ERROR_BUFFER1_OVERFLOW GFXMMU_SR_B1OF /*!< Buffer 1 overflow */
+#define GFXMMU_ERROR_BUFFER2_OVERFLOW GFXMMU_SR_B2OF /*!< Buffer 2 overflow */
+#define GFXMMU_ERROR_BUFFER3_OVERFLOW GFXMMU_SR_B3OF /*!< Buffer 3 overflow */
+#define GFXMMU_ERROR_AHB_MASTER       GFXMMU_SR_AMEF /*!< AHB master error */
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+#define GFXMMU_ERROR_INVALID_CALLBACK 0x00000100U    /*!< Invalid callback error */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_LutLineStatus GFXMMU LUT line status
+  * @{
+  */
+#define GFXMMU_LUT_LINE_DISABLE 0x00000000U     /*!< LUT line disabled */
+#define GFXMMU_LUT_LINE_ENABLE  GFXMMU_LUTxL_EN /*!< LUT line enabled */
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_CacheForceParam GFXMMU cache force parameter
+  * @{
+  */
+#define GFXMMU_CACHE_FORCE_FLUSH      GFXMMU_CCR_FF /*!< Force cache flush */
+#define GFXMMU_CACHE_FORCE_INVALIDATE GFXMMU_CCR_FI /*!< Force cache invalidate */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+/* End of exported constants -------------------------------------------------*/
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup GFXMMU_Exported_Macros GFXMMU Exported Macros
+ * @{
+ */
+
+/** @brief  Reset GFXMMU handle state.
+  * @param  __HANDLE__ GFXMMU handle.
+  * @retval None
+  */
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+#define __HAL_GFXMMU_RESET_HANDLE_STATE(__HANDLE__) do{                                               \
+                                                        (__HANDLE__)->State = HAL_GFXMMU_STATE_RESET; \
+                                                        (__HANDLE__)->MspInitCallback = NULL;         \
+                                                        (__HANDLE__)->MspDeInitCallback = NULL;       \
+                                                      } while(0)
+#else
+#define __HAL_GFXMMU_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_GFXMMU_STATE_RESET)
+#endif
+
+/**
+  * @}
+  */
+/* End of exported macros ----------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GFXMMU_Exported_Functions GFXMMU Exported Functions
+  * @{
+  */
+
+/** @addtogroup GFXMMU_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_GFXMMU_Init(GFXMMU_HandleTypeDef *hgfxmmu);
+HAL_StatusTypeDef HAL_GFXMMU_DeInit(GFXMMU_HandleTypeDef *hgfxmmu);
+void HAL_GFXMMU_MspInit(GFXMMU_HandleTypeDef *hgfxmmu);
+void HAL_GFXMMU_MspDeInit(GFXMMU_HandleTypeDef *hgfxmmu);
+#if (USE_HAL_GFXMMU_REGISTER_CALLBACKS == 1)
+/* GFXMMU callbacks register/unregister functions *****************************/
+HAL_StatusTypeDef HAL_GFXMMU_RegisterCallback(GFXMMU_HandleTypeDef        *hgfxmmu,
+                                              HAL_GFXMMU_CallbackIDTypeDef CallbackID,
+                                              pGFXMMU_CallbackTypeDef      pCallback);
+HAL_StatusTypeDef HAL_GFXMMU_UnRegisterCallback(GFXMMU_HandleTypeDef        *hgfxmmu,
+                                                HAL_GFXMMU_CallbackIDTypeDef CallbackID);
+#endif
+/**
+  * @}
+  */
+
+/** @addtogroup GFXMMU_Exported_Functions_Group2 Operations functions
+  * @{
+  */
+/* Operation functions ********************************************************/
+HAL_StatusTypeDef HAL_GFXMMU_ConfigLut(GFXMMU_HandleTypeDef *hgfxmmu,
+                                       uint32_t FirstLine,
+                                       uint32_t LinesNumber,
+                                       uint32_t Address);
+
+HAL_StatusTypeDef HAL_GFXMMU_DisableLutLines(GFXMMU_HandleTypeDef *hgfxmmu,
+                                             uint32_t FirstLine,
+                                             uint32_t LinesNumber);
+
+HAL_StatusTypeDef HAL_GFXMMU_ConfigLutLine(GFXMMU_HandleTypeDef *hgfxmmu, GFXMMU_LutLineTypeDef *lutLine);
+
+HAL_StatusTypeDef HAL_GFXMMU_ConfigForceCache(GFXMMU_HandleTypeDef *hgfxmmu, uint32_t ForceParam);
+
+HAL_StatusTypeDef HAL_GFXMMU_ModifyBuffers(GFXMMU_HandleTypeDef *hgfxmmu, GFXMMU_BuffersTypeDef *Buffers);
+
+HAL_StatusTypeDef HAL_GFXMMU_ModifyCachePrefetch(GFXMMU_HandleTypeDef *hgfxmmu,
+                                                 GFXMMU_CachePrefetchTypeDef *CachePrefetch);
+
+void HAL_GFXMMU_IRQHandler(GFXMMU_HandleTypeDef *hgfxmmu);
+
+void HAL_GFXMMU_ErrorCallback(GFXMMU_HandleTypeDef *hgfxmmu);
+/**
+  * @}
+  */
+
+/** @defgroup GFXMMU_Exported_Functions_Group3 State functions
+  * @{
+  */
+/* State function *************************************************************/
+HAL_GFXMMU_StateTypeDef HAL_GFXMMU_GetState(GFXMMU_HandleTypeDef *hgfxmmu);
+
+uint32_t HAL_GFXMMU_GetError(GFXMMU_HandleTypeDef *hgfxmmu);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GFXMMU_Private_Macros GFXMMU Private Macros
+* @{
+*/
+#define IS_GFXMMU_BLOCKS_PER_LINE(VALUE) (((VALUE) == GFXMMU_256BLOCKS) || \
+                                          ((VALUE) == GFXMMU_192BLOCKS))
+
+#define IS_GFXMMU_BUFFER_ADDRESS(VALUE) (((VALUE) & 0xFU) == 0U)
+
+#define IS_GFXMMU_CACHE_LOCK(VALUE) (((VALUE) == GFXMMU_CACHE_LOCK_DISABLE) || \
+                                     ((VALUE) == GFXMMU_CACHE_LOCK_ENABLE))
+
+#define IS_GFXMMU_CACHE_LOCK_BUFFER(VALUE) (((VALUE) == GFXMMU_CACHE_LOCK_BUFFER0) || \
+                                            ((VALUE) == GFXMMU_CACHE_LOCK_BUFFER1) || \
+                                            ((VALUE) == GFXMMU_CACHE_LOCK_BUFFER2) || \
+                                            ((VALUE) == GFXMMU_CACHE_LOCK_BUFFER3))
+
+#define IS_GFXMMU_CACHE_FORCE(VALUE) (((VALUE) == GFXMMU_CACHE_FORCE_DISABLE) || \
+                                      ((VALUE) == GFXMMU_CACHE_FORCE_ENABLE))
+
+#define IS_GFXMMU_OUTTER_BUFFERABILITY(VALUE) (((VALUE) == GFXMMU_OUTTER_BUFFERABILITY_DISABLE) || \
+                                               ((VALUE) == GFXMMU_OUTTER_BUFFERABILITY_ENABLE))
+
+#define IS_GFXMMU_OUTTER_CACHABILITY(VALUE) (((VALUE) == GFXMMU_OUTTER_CACHABILITY_DISABLE) || \
+                                             ((VALUE) == GFXMMU_OUTTER_CACHABILITY_ENABLE))
+
+#define IS_GFXMMU_PREFETCH(VALUE) (((VALUE) == GFXMMU_PREFETCH_DISABLE) || \
+                                   ((VALUE) == GFXMMU_PREFETCH_ENABLE))
+
+#define IS_GFXMMU_INTERRUPTS(VALUE) (((VALUE) & 0x1FU) != 0U)
+
+#define IS_GFXMMU_LUT_LINE(VALUE) ((VALUE) < 1024U)
+
+#define IS_GFXMMU_LUT_LINES_NUMBER(VALUE) (((VALUE) > 0U) && ((VALUE) <= 1024U))
+
+#define IS_GFXMMU_LUT_LINE_STATUS(VALUE) (((VALUE) == GFXMMU_LUT_LINE_DISABLE) || \
+                                          ((VALUE) == GFXMMU_LUT_LINE_ENABLE))
+
+#define IS_GFXMMU_LUT_BLOCK(VALUE) ((VALUE) < 256U)
+
+#define IS_GFXMMU_LUT_LINE_OFFSET(VALUE) (((VALUE) >= -4080) && ((VALUE) <= 4190208))
+
+#define IS_GFXMMU_CACHE_FORCE_ACTION(VALUE) (((VALUE) == GFXMMU_CACHE_FORCE_FLUSH) || \
+                                             ((VALUE) == GFXMMU_CACHE_FORCE_INVALIDATE) || \
+                                             ((VALUE) == (GFXMMU_CACHE_FORCE_FLUSH | GFXMMU_CACHE_FORCE_INVALIDATE)))
+/**
+  * @}
+  */ 
+/* End of private macros -----------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+#endif /* GFXMMU */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_GFXMMU_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h

@@ -0,0 +1,346 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_GPIO_H
+#define STM32H7xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/**
+  * @brief   GPIO Init structure definition
+  */
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins.
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+} GPIO_InitTypeDef;
+
+/**
+  * @brief  GPIO Bit SET and Bit RESET enumeration
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0U,
+  GPIO_PIN_SET
+} GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants  GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define  GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              (0x0000FFFFU) /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define  GPIO mode define
+  * @brief GPIO Configuration Mode
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */
+#define  GPIO_MODE_INPUT                        (0x00000000U)   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    (0x00000001U)   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    (0x00000011U)   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        (0x00000002U)   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        (0x00000012U)   /*!< Alternate Function Open Drain Mode    */
+
+#define  GPIO_MODE_ANALOG                       (0x00000003U)   /*!< Analog Mode  */
+
+#define  GPIO_MODE_IT_RISING                    (0x11110000U)   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   (0x11210000U)   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            (0x11310000U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+
+#define  GPIO_MODE_EVT_RISING                   (0x11120000U)   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  (0x11220000U)   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           (0x11320000U)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */
+#define  GPIO_SPEED_FREQ_LOW         (0x00000000U)  /*!< Low speed     */
+#define  GPIO_SPEED_FREQ_MEDIUM      (0x00000001U)  /*!< Medium speed  */
+#define  GPIO_SPEED_FREQ_HIGH        (0x00000002U)  /*!< Fast speed    */
+#define  GPIO_SPEED_FREQ_VERY_HIGH   (0x00000003U)  /*!< High speed    */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_pull_define  GPIO pull define
+  * @brief GPIO Pull-Up or Pull-Down Activation
+  * @{
+  */
+#define  GPIO_NOPULL        (0x00000000U)   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        (0x00000001U)   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      (0x00000002U)   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR1 = (__EXTI_LINE__))
+
+#if defined(DUAL_CORE)
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTID2_GET_FLAG(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTID2_GET_IT(__EXTI_LINE__) (EXTI->C2PR1 & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTID2_CLEAR_IT(__EXTI_LINE__) (EXTI->C2PR1 = (__EXTI_LINE__))
+#endif
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER1 |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32h7xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef *GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(__PIN__)        ((((uint32_t)(__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\
+                                     (((uint32_t)(__PIN__) & ~GPIO_PIN_MASK) == 0x00U))
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW)  || ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || \
+                              ((SPEED) == GPIO_SPEED_FREQ_HIGH) || ((SPEED) == GPIO_SPEED_FREQ_VERY_HIGH))
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h

@@ -0,0 +1,489 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_GPIO_EX_H
+#define STM32H7xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIOEx GPIOEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+  * @{
+  */
+
+/**
+  * @brief   AF 0 selection
+  */
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                                                     */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping                                          */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping                                           */
+#define GPIO_AF0_LCDBIAS       ((uint8_t)0x00)  /* LCDBIAS Alternate Function mapping                                                      */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                                                        */
+#if defined (PWR_CPUCR_PDDS_D2) /* PWR D1 and D2 domains exists */
+#define GPIO_AF0_C1DSLEEP      ((uint8_t)0x00)  /* Cortex-M7 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above  */
+#define GPIO_AF0_C1SLEEP       ((uint8_t)0x00)  /* Cortex-M7 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above       */
+#define GPIO_AF0_D1PWREN       ((uint8_t)0x00)  /* Domain 1 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above   */
+#define GPIO_AF0_D2PWREN       ((uint8_t)0x00)  /* Domain 2 PWR enable Alternate Function mapping : available on STM32H7 Rev.B and above   */
+#if defined(DUAL_CORE)
+#define GPIO_AF0_C2DSLEEP      ((uint8_t)0x00)  /* Cortex-M4 Deep Sleep Alternate Function mapping : available on STM32H7 Rev.B and above  */
+#define GPIO_AF0_C2SLEEP       ((uint8_t)0x00)  /* Cortex-M4 Sleep Alternate Function mapping : available on STM32H7 Rev.B and above       */
+#endif /* DUAL_CORE */
+#endif /* PWR_CPUCR_PDDS_D2 */
+
+/**
+  * @brief   AF 1 selection
+  */
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping   */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping   */
+#define GPIO_AF1_TIM16         ((uint8_t)0x01)  /* TIM16 Alternate Function mapping  */
+#define GPIO_AF1_TIM17         ((uint8_t)0x01)  /* TIM17 Alternate Function mapping  */
+#define GPIO_AF1_LPTIM1        ((uint8_t)0x01)  /* LPTIM1 Alternate Function mapping */
+#if defined(HRTIM1)
+#define GPIO_AF1_HRTIM1        ((uint8_t)0x01)  /* HRTIM1 Alternate Function mapping */
+#endif /* HRTIM1 */
+#if defined(SAI4)
+#define GPIO_AF1_SAI4          ((uint8_t)0x01)  /* SAI4 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
+#endif /* SAI4 */
+#define GPIO_AF1_FMC           ((uint8_t)0x01)  /* FMC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
+
+
+/**
+  * @brief   AF 2 selection
+  */
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping   */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping   */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping   */
+#define GPIO_AF2_TIM12         ((uint8_t)0x02)  /* TIM12 Alternate Function mapping  */
+#define GPIO_AF2_SAI1          ((uint8_t)0x02)  /* SAI1 Alternate Function mapping   */
+#if defined(HRTIM1)
+#define GPIO_AF2_HRTIM1        ((uint8_t)0x02)  /* HRTIM1 Alternate Function mapping */
+#endif /* HRTIM1 */
+#define GPIO_AF2_TIM15         ((uint8_t)0x02)  /* TIM15 Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
+#if defined(FDCAN3)
+#define GPIO_AF2_FDCAN3        ((uint8_t)0x02)  /* FDCAN3 Alternate Function mapping */
+#endif /*FDCAN3*/
+
+/**
+  * @brief   AF 3 selection
+  */
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping   */
+#define GPIO_AF3_LPTIM2        ((uint8_t)0x03)  /* LPTIM2 Alternate Function mapping */
+#define GPIO_AF3_DFSDM1        ((uint8_t)0x03)  /* DFSDM Alternate Function mapping  */
+#define GPIO_AF3_LPTIM3        ((uint8_t)0x03)  /* LPTIM3 Alternate Function mapping */
+#define GPIO_AF3_LPTIM4        ((uint8_t)0x03)  /* LPTIM4 Alternate Function mapping */
+#define GPIO_AF3_LPTIM5        ((uint8_t)0x03)  /* LPTIM5 Alternate Function mapping */
+#define GPIO_AF3_LPUART        ((uint8_t)0x03)  /* LPUART Alternate Function mapping */
+#if defined(OCTOSPIM)
+#define GPIO_AF3_OCTOSPIM_P1   ((uint8_t)0x03)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#define GPIO_AF3_OCTOSPIM_P2   ((uint8_t)0x03)  /* OCTOSPI Manager Port 2 Alternate Function mapping */
+#endif /* OCTOSPIM */
+#if defined(HRTIM1)
+#define GPIO_AF3_HRTIM1        ((uint8_t)0x03)  /* HRTIM1 Alternate Function mapping */
+#endif /* HRTIM1 */
+#define GPIO_AF3_LTDC          ((uint8_t)0x03)  /* LTDC Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
+
+/**
+  * @brief   AF 4 selection
+  */
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping   */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping   */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping   */
+#define GPIO_AF4_I2C4          ((uint8_t)0x04)  /* I2C4 Alternate Function mapping   */
+#if defined(I2C5)
+#define GPIO_AF4_I2C5          ((uint8_t)0x04)  /* I2C5 Alternate Function mapping   */
+#endif /* I2C5*/
+#define GPIO_AF4_TIM15         ((uint8_t)0x04)  /* TIM15 Alternate Function mapping  */
+#define GPIO_AF4_CEC           ((uint8_t)0x04)  /* CEC Alternate Function mapping    */
+#define GPIO_AF4_LPTIM2        ((uint8_t)0x04)  /* LPTIM2 Alternate Function mapping */
+#define GPIO_AF4_USART1        ((uint8_t)0x04)  /* USART1 Alternate Function mapping */
+#if defined(USART10)
+#define GPIO_AF4_USART10       ((uint8_t)0x04)  /* USART10 Alternate Function mapping : available on STM32H72xxx/STM32H73xxx */
+#endif /*USART10*/
+#define GPIO_AF4_DFSDM1        ((uint8_t)0x04)  /* DFSDM  Alternate Function mapping */
+#if defined(DFSDM2_BASE)
+#define GPIO_AF4_DFSDM2        ((uint8_t)0x04)  /* DFSDM2 Alternate Function mapping */
+#endif /* DFSDM2_BASE */
+#define GPIO_AF4_DCMI          ((uint8_t)0x04)   /* DCMI Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
+#if defined(PSSI)
+#define GPIO_AF4_PSSI          ((uint8_t)0x04)  /* PSSI Alternate Function mapping   */
+#endif /* PSSI */
+#if defined(OCTOSPIM)
+#define GPIO_AF4_OCTOSPIM_P1   ((uint8_t)0x04)  /* OCTOSPI Manager Port 1 Alternate Function mapping  : available on STM32H72xxx/STM32H73xxx */
+#endif /* OCTOSPIM */
+
+/**
+  * @brief   AF 5 selection
+  */
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping   */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping   */
+#define GPIO_AF5_SPI5          ((uint8_t)0x05)  /* SPI5 Alternate Function mapping   */
+#define GPIO_AF5_SPI6          ((uint8_t)0x05)  /* SPI6 Alternate Function mapping   */
+#define GPIO_AF5_CEC           ((uint8_t)0x05)  /* CEC  Alternate Function mapping   */
+#if defined(FDCAN3)
+#define GPIO_AF5_FDCAN3        ((uint8_t)0x05)  /* FDCAN3 Alternate Function mapping */
+#endif /*FDCAN3*/
+
+/**
+  * @brief   AF 6 selection
+  */
+#define GPIO_AF6_SPI2          ((uint8_t)0x06)  /* SPI2 Alternate Function mapping   */
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3 Alternate Function mapping   */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping   */
+#define GPIO_AF6_I2C4          ((uint8_t)0x06)  /* I2C4 Alternate Function mapping   */
+#if defined(I2C5)
+#define GPIO_AF6_I2C5          ((uint8_t)0x06)  /* I2C5 Alternate Function mapping   */
+#endif /* I2C5*/
+#define GPIO_AF6_DFSDM1        ((uint8_t)0x06)  /* DFSDM Alternate Function mapping  */
+#define GPIO_AF6_UART4         ((uint8_t)0x06)  /* UART4 Alternate Function mapping  */
+#if defined(DFSDM2_BASE)
+#define GPIO_AF6_DFSDM2        ((uint8_t)0x06)  /* DFSDM2 Alternate Function mapping */
+#endif /* DFSDM2_BASE */
+#if defined(SAI3)
+#define GPIO_AF6_SAI3          ((uint8_t)0x06)  /* SAI3 Alternate Function mapping   */
+#endif /* SAI3 */
+#if defined(OCTOSPIM)
+#define GPIO_AF6_OCTOSPIM_P1   ((uint8_t)0x06)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#endif /* OCTOSPIM */
+
+/**
+  * @brief   AF 7 selection
+  */
+#define GPIO_AF7_SPI2          ((uint8_t)0x07)  /* SPI2 Alternate Function mapping   */
+#define GPIO_AF7_SPI3          ((uint8_t)0x07)  /* SPI3 Alternate Function mapping   */
+#define GPIO_AF7_SPI6          ((uint8_t)0x07)  /* SPI6 Alternate Function mapping   */
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping */
+#define GPIO_AF7_USART6        ((uint8_t)0x07)  /* USART6 Alternate Function mapping */
+#define GPIO_AF7_UART7         ((uint8_t)0x07)  /* UART7 Alternate Function mapping  */
+#define GPIO_AF7_SDMMC1        ((uint8_t)0x07)  /* SDMMC1 Alternate Function mapping */
+
+/**
+  * @brief   AF 8 selection
+  */
+#define GPIO_AF8_SPI6          ((uint8_t)0x08)  /* SPI6 Alternate Function mapping   */
+#if defined(SAI2)
+#define GPIO_AF8_SAI2          ((uint8_t)0x08)  /* SAI2 Alternate Function mapping   */
+#endif /*SAI2*/
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_UART8         ((uint8_t)0x08)  /* UART8 Alternate Function mapping  */
+#define GPIO_AF8_SPDIF         ((uint8_t)0x08)  /* SPDIF Alternate Function mapping  */
+#define GPIO_AF8_LPUART        ((uint8_t)0x08)  /* LPUART Alternate Function mapping */
+#define GPIO_AF8_SDMMC1        ((uint8_t)0x08)  /* SDMMC1 Alternate Function mapping */
+#if defined(SAI4)
+#define GPIO_AF8_SAI4          ((uint8_t)0x08)  /* SAI4 Alternate Function mapping   */
+#endif /* SAI4 */
+
+/**
+  * @brief   AF 9 selection
+  */
+#define GPIO_AF9_FDCAN1        ((uint8_t)0x09)  /* FDCAN1 Alternate Function mapping   */
+#define GPIO_AF9_FDCAN2        ((uint8_t)0x09)  /* FDCAN2 Alternate Function mapping   */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping    */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping    */
+#define GPIO_AF9_SDMMC2        ((uint8_t)0x09)  /* SDMMC2 Alternate Function mapping   */
+#define GPIO_AF9_LTDC          ((uint8_t)0x09)  /* LTDC Alternate Function mapping     */
+#define GPIO_AF9_SPDIF         ((uint8_t)0x09)  /* SPDIF Alternate Function mapping    */
+#define GPIO_AF9_FMC           ((uint8_t)0x09)  /* FMC Alternate Function mapping      */
+#if defined(QUADSPI)
+#define GPIO_AF9_QUADSPI       ((uint8_t)0x09)  /* QUADSPI Alternate Function mapping  */
+#endif /* QUADSPI */
+#if defined(SAI4)
+#define GPIO_AF9_SAI4          ((uint8_t)0x09)  /* SAI4 Alternate Function mapping     */
+#endif /* SAI4 */
+#if defined(OCTOSPIM)
+#define GPIO_AF9_OCTOSPIM_P1   ((uint8_t)0x09)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#define GPIO_AF9_OCTOSPIM_P2   ((uint8_t)0x09)  /* OCTOSPI Manager Port 2 Alternate Function mapping */
+#endif /* OCTOSPIM */
+
+/**
+  * @brief   AF 10 selection
+  */
+#if defined(SAI2)
+#define GPIO_AF10_SAI2          ((uint8_t)0x0A)  /* SAI2 Alternate Function mapping                                             */
+#endif /*SAI2*/
+#define GPIO_AF10_SDMMC2        ((uint8_t)0x0A)  /* SDMMC2 Alternate Function mapping                                           */
+#if defined(USB2_OTG_FS)
+#define GPIO_AF10_OTG2_FS       ((uint8_t)0x0A)  /* OTG2_FS Alternate Function mapping                                          */
+#endif /*USB2_OTG_FS*/
+#define GPIO_AF10_COMP1         ((uint8_t)0x0A)  /* COMP1 Alternate Function mapping                                            */
+#define GPIO_AF10_COMP2         ((uint8_t)0x0A)  /* COMP2 Alternate Function mapping                                            */
+#if defined(LTDC)
+#define GPIO_AF10_LTDC          ((uint8_t)0x0A)  /* LTDC Alternate Function mapping                                             */
+#endif /*LTDC*/
+#define GPIO_AF10_CRS_SYNC      ((uint8_t)0x0A)  /* CRS Sync Alternate Function mapping : available on STM32H7 Rev.B and above  */
+#if defined(QUADSPI)
+#define GPIO_AF10_QUADSPI       ((uint8_t)0x0A)  /* QUADSPI Alternate Function mapping                                          */
+#endif /* QUADSPI */
+#if defined(SAI4)
+#define GPIO_AF10_SAI4          ((uint8_t)0x0A)  /* SAI4 Alternate Function mapping                                             */
+#endif /* SAI4 */
+#if !defined(USB2_OTG_FS)
+#define GPIO_AF10_OTG1_FS       ((uint8_t)0x0A)  /* OTG1_FS Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
+#endif /* !USB2_OTG_FS */
+#define GPIO_AF10_OTG1_HS       ((uint8_t)0x0A)  /* OTG1_HS Alternate Function mapping                                          */
+#if defined(OCTOSPIM)
+#define GPIO_AF10_OCTOSPIM_P1   ((uint8_t)0x0A)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#endif /* OCTOSPIM */
+#define GPIO_AF10_TIM8          ((uint8_t)0x0A)  /* TIM8 Alternate Function mapping                                             */
+#define GPIO_AF10_FMC           ((uint8_t)0x0A)  /* FMC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
+
+/**
+  * @brief   AF 11 selection
+  */
+#define GPIO_AF11_SWP           ((uint8_t)0x0B)  /* SWP Alternate Function mapping     */
+#define GPIO_AF11_MDIOS         ((uint8_t)0x0B)  /* MDIOS Alternate Function mapping   */
+#define GPIO_AF11_UART7         ((uint8_t)0x0B)  /* UART7 Alternate Function mapping   */
+#define GPIO_AF11_SDMMC2        ((uint8_t)0x0B)  /* SDMMC2 Alternate Function mapping  */
+#define GPIO_AF11_DFSDM1        ((uint8_t)0x0B)  /* DFSDM1 Alternate Function mapping  */
+#define GPIO_AF11_COMP1         ((uint8_t)0x0B)  /* COMP1 Alternate Function mapping   */
+#define GPIO_AF11_COMP2         ((uint8_t)0x0B)  /* COMP2 Alternate Function mapping   */
+#define GPIO_AF11_TIM1          ((uint8_t)0x0B)  /* TIM1 Alternate Function mapping    */
+#define GPIO_AF11_TIM8          ((uint8_t)0x0B)  /* TIM8 Alternate Function mapping    */
+#define GPIO_AF11_I2C4          ((uint8_t)0x0B)  /* I2C4 Alternate Function mapping    */
+#if defined(DFSDM2_BASE)
+#define GPIO_AF11_DFSDM2        ((uint8_t)0x0B)  /* DFSDM2 Alternate Function mapping  */
+#endif /* DFSDM2_BASE */
+#if defined(USART10)
+#define GPIO_AF11_USART10       ((uint8_t)0x0B)  /* USART10 Alternate Function mapping */
+#endif /* USART10 */
+#if defined(UART9)
+#define GPIO_AF11_UART9         ((uint8_t)0x0B)  /* UART9 Alternate Function mapping   */
+#endif /* UART9 */
+#if defined(ETH)
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETH Alternate Function mapping     */
+#endif /* ETH */
+#if defined(LTDC)
+#define GPIO_AF11_LTDC          ((uint8_t)0x0B)  /* LTDC Alternate Function mapping : available on STM32H7A3xxx/STM32H7B3xxx/STM32H7B0xxx and STM32H72xxx/STM32H73xxx */
+#endif /*LTDC*/
+#if defined(OCTOSPIM)
+#define GPIO_AF11_OCTOSPIM_P1   ((uint8_t)0x0B)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#endif /* OCTOSPIM */
+
+/**
+  * @brief   AF 12 selection
+  */
+#define GPIO_AF12_FMC           ((uint8_t)0x0C)  /* FMC Alternate Function mapping     */
+#define GPIO_AF12_SDMMC1        ((uint8_t)0x0C)  /* SDMMC1 Alternate Function mapping  */
+#define GPIO_AF12_MDIOS         ((uint8_t)0x0C)  /* MDIOS Alternate Function mapping   */
+#define GPIO_AF12_COMP1         ((uint8_t)0x0C)  /* COMP1 Alternate Function mapping   */
+#define GPIO_AF12_COMP2         ((uint8_t)0x0C)  /* COMP2 Alternate Function mapping   */
+#define GPIO_AF12_TIM1          ((uint8_t)0x0C)  /* TIM1 Alternate Function mapping    */
+#define GPIO_AF12_TIM8          ((uint8_t)0x0C)  /* TIM8 Alternate Function mapping    */
+#if defined(LTDC)
+#define GPIO_AF12_LTDC          ((uint8_t)0x0C)  /* LTDC Alternate Function mapping    */
+#endif /*LTDC*/
+#if defined(USB2_OTG_FS)
+#define GPIO_AF12_OTG1_FS       ((uint8_t)0x0C)  /* OTG1_FS Alternate Function mapping */
+#endif /* USB2_OTG_FS */
+#if defined(OCTOSPIM)
+#define GPIO_AF12_OCTOSPIM_P1   ((uint8_t)0x0C)  /* OCTOSPI Manager Port 1 Alternate Function mapping */
+#endif /* OCTOSPIM */
+
+/**
+  * @brief   AF 13 selection
+  */
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)   /* DCMI Alternate Function mapping  */
+#define GPIO_AF13_COMP1         ((uint8_t)0x0D)   /* COMP1 Alternate Function mapping */
+#define GPIO_AF13_COMP2         ((uint8_t)0x0D)   /* COMP2 Alternate Function mapping */
+#if defined(LTDC)
+#define GPIO_AF13_LTDC          ((uint8_t)0x0D)   /* LTDC Alternate Function mapping  */
+#endif /*LTDC*/
+#if defined(DSI)
+#define GPIO_AF13_DSI           ((uint8_t)0x0D)   /* DSI Alternate Function mapping   */
+#endif /* DSI */
+#if defined(PSSI)
+#define GPIO_AF13_PSSI          ((uint8_t)0x0D)   /* PSSI Alternate Function mapping  */
+#endif /* PSSI */
+#define GPIO_AF13_TIM1          ((uint8_t)0x0D)    /* TIM1 Alternate Function mapping */
+#if defined(TIM23)
+#define GPIO_AF13_TIM23         ((uint8_t)0x0D)    /* TIM23 Alternate Function mapping */
+#endif  /*TIM23*/
+
+/**
+  * @brief   AF 14 selection
+  */
+#define GPIO_AF14_LTDC         ((uint8_t)0x0E)   /* LTDC Alternate Function mapping  */
+#define GPIO_AF14_UART5        ((uint8_t)0x0E)   /* UART5 Alternate Function mapping */
+#if defined(TIM24)
+#define GPIO_AF14_TIM24        ((uint8_t)0x0E)   /* TIM24 Alternate Function mapping */
+#endif  /*TIM24*/
+
+/**
+  * @brief   AF 15 selection
+  */
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF)   ((AF) <= (uint8_t)0x0F)
+
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @brief   GPIO pin available on the platform
+  */
+/* Defines the available pins per GPIOs */
+#define GPIOA_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOB_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOC_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOD_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOE_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOF_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOG_PIN_AVAILABLE  GPIO_PIN_All
+#if defined(GPIOI)
+#define GPIOI_PIN_AVAILABLE  GPIO_PIN_All
+#endif /*GPIOI*/
+#if defined(GPIOI)
+#define GPIOJ_PIN_AVAILABLE  GPIO_PIN_All
+#else
+#define GPIOJ_PIN_AVAILABLE  (GPIO_PIN_8 | GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11 )
+#endif /* GPIOI */
+#define GPIOH_PIN_AVAILABLE  GPIO_PIN_All
+#if defined(GPIOI)
+#define GPIOK_PIN_AVAILABLE  (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 | GPIO_PIN_3 | GPIO_PIN_4 | \
+                              GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
+#else
+#define GPIOK_PIN_AVAILABLE  (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2 )
+#endif /* GPIOI */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+  * @{
+  */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+  * @{
+  */
+#if defined(GPIOI)
+#define GPIO_GET_INDEX(__GPIOx__)  (((__GPIOx__) == (GPIOA))? 0UL :\
+                                    ((__GPIOx__) == (GPIOB))? 1UL :\
+                                    ((__GPIOx__) == (GPIOC))? 2UL :\
+                                    ((__GPIOx__) == (GPIOD))? 3UL :\
+                                    ((__GPIOx__) == (GPIOE))? 4UL :\
+                                    ((__GPIOx__) == (GPIOF))? 5UL :\
+                                    ((__GPIOx__) == (GPIOG))? 6UL :\
+                                    ((__GPIOx__) == (GPIOH))? 7UL :\
+                                    ((__GPIOx__) == (GPIOI))? 8UL :\
+                                    ((__GPIOx__) == (GPIOJ))? 9UL : 10UL)
+#else
+#define GPIO_GET_INDEX(__GPIOx__)  (((__GPIOx__) == (GPIOA))? 0UL :\
+                                    ((__GPIOx__) == (GPIOB))? 1UL :\
+                                    ((__GPIOx__) == (GPIOC))? 2UL :\
+                                    ((__GPIOx__) == (GPIOD))? 3UL :\
+                                    ((__GPIOx__) == (GPIOE))? 4UL :\
+                                    ((__GPIOx__) == (GPIOF))? 5UL :\
+                                    ((__GPIOx__) == (GPIOG))? 6UL :\
+                                    ((__GPIOx__) == (GPIOH))? 7UL :\
+                                    ((__GPIOx__) == (GPIOJ))? 9UL : 10UL)
+#endif /* GPIOI */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hash.h

@@ -0,0 +1,621 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_hash.h
+  * @author  MCD Application Team
+  * @brief   Header file of HASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_HASH_H
+#define STM32H7xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+#if defined (HASH)
+/** @addtogroup HASH
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HASH Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t DataType;    /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit data.
+                              This parameter can be a value of @ref HASH_Data_Type. */
+
+  uint32_t KeySize;     /*!< The key size is used only in HMAC operation. */
+
+  uint8_t* pKey;        /*!< The key is used only in HMAC operation. */
+
+} HASH_InitTypeDef;
+
+/**
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_HASH_STATE_RESET             = 0x00U,    /*!< Peripheral is not initialized            */
+  HAL_HASH_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use */
+  HAL_HASH_STATE_BUSY              = 0x02U,    /*!< Processing (hashing) is ongoing          */
+  HAL_HASH_STATE_TIMEOUT           = 0x06U,    /*!< Timeout state                            */
+  HAL_HASH_STATE_ERROR             = 0x07U,    /*!< Error state                              */
+  HAL_HASH_STATE_SUSPENDED         = 0x08U     /*!< Suspended state                          */
+}HAL_HASH_StateTypeDef;
+
+/**
+  * @brief HAL phase structures definition
+  */
+typedef enum
+{
+  HAL_HASH_PHASE_READY             = 0x01U,    /*!< HASH peripheral is ready to start                    */
+  HAL_HASH_PHASE_PROCESS           = 0x02U,    /*!< HASH peripheral is in HASH processing phase          */
+  HAL_HASH_PHASE_HMAC_STEP_1       = 0x03U,    /*!< HASH peripheral is in HMAC step 1 processing phase
+                                              (step 1 consists in entering the inner hash function key) */
+  HAL_HASH_PHASE_HMAC_STEP_2       = 0x04U,    /*!< HASH peripheral is in HMAC step 2 processing phase
+                                              (step 2 consists in entering the message text) */
+  HAL_HASH_PHASE_HMAC_STEP_3       = 0x05U     /*!< HASH peripheral is in HMAC step 3 processing phase
+                                              (step 3 consists in entering the outer hash function key) */
+}HAL_HASH_PhaseTypeDef;
+
+/**
+  * @brief HAL HASH mode suspend definitions
+  */
+typedef enum
+{
+  HAL_HASH_SUSPEND_NONE            = 0x00U,    /*!< HASH peripheral suspension not requested */
+  HAL_HASH_SUSPEND                 = 0x01U     /*!< HASH peripheral suspension is requested  */
+}HAL_HASH_SuspendTypeDef;
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  HAL HASH common Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_HASH_MSPINIT_CB_ID           = 0x00U,    /*!< HASH MspInit callback ID     */
+  HAL_HASH_MSPDEINIT_CB_ID         = 0x01U,    /*!< HASH MspDeInit callback ID   */
+  HAL_HASH_INPUTCPLT_CB_ID         = 0x02U,    /*!< HASH input completion callback ID */
+  HAL_HASH_DGSTCPLT_CB_ID          = 0x03U,    /*!< HASH digest computation completion callback ID */
+  HAL_HASH_ERROR_CB_ID             = 0x04U,    /*!< HASH error callback ID     */
+}HAL_HASH_CallbackIDTypeDef;
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+
+/**
+  * @brief  HASH Handle Structure definition
+  */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+typedef struct __HASH_HandleTypeDef
+#else
+typedef struct
+#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
+{
+  HASH_InitTypeDef           Init;             /*!< HASH required parameters */
+
+  uint8_t                    *pHashInBuffPtr;  /*!< Pointer to input buffer */
+
+  uint8_t                    *pHashOutBuffPtr; /*!< Pointer to output buffer (digest) */
+
+  uint8_t                    *pHashKeyBuffPtr; /*!< Pointer to key buffer (HMAC only) */
+
+  uint8_t                    *pHashMsgBuffPtr; /*!< Pointer to message buffer (HMAC only) */
+
+  uint32_t                   HashBuffSize;     /*!< Size of buffer to be processed */
+
+  __IO uint32_t              HashInCount;      /*!< Counter of inputted data */
+
+  __IO uint32_t              HashITCounter;    /*!< Counter of issued interrupts */
+
+  __IO uint32_t              HashKeyCount;     /*!< Counter for Key inputted data (HMAC only) */
+
+  HAL_StatusTypeDef          Status;           /*!< HASH peripheral status   */
+
+  HAL_HASH_PhaseTypeDef      Phase;            /*!< HASH peripheral phase   */
+
+  DMA_HandleTypeDef          *hdmain;          /*!< HASH In DMA Handle parameters */
+
+  HAL_LockTypeDef            Lock;             /*!< Locking object */
+
+  __IO HAL_HASH_StateTypeDef State;            /*!< HASH peripheral state */
+
+  HAL_HASH_SuspendTypeDef    SuspendRequest;   /*!< HASH peripheral suspension request flag */
+
+  FlagStatus                 DigestCalculationDisable;  /*!< Digest calculation phase skip (MDMAT bit control) for multi-buffers DMA-based HMAC computation */
+
+  __IO uint32_t              NbWordsAlreadyPushed;      /*!< Numbers of words already pushed in FIFO before inputting new block */
+
+  __IO  uint32_t             ErrorCode;        /*!< HASH Error code */
+
+  __IO  uint32_t             Accumulation;     /*!< HASH multi buffers accumulation flag */
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+  void    (* InCpltCallback)( struct __HASH_HandleTypeDef * hhash);    /*!< HASH input completion callback */
+
+  void    (* DgstCpltCallback)( struct __HASH_HandleTypeDef * hhash);  /*!< HASH digest computation completion callback */
+
+  void    (* ErrorCallback)( struct __HASH_HandleTypeDef * hhash);     /*!< HASH error callback */
+
+  void    (* MspInitCallback)( struct __HASH_HandleTypeDef * hhash);   /*!< HASH Msp Init callback */
+
+  void    (* MspDeInitCallback)( struct __HASH_HandleTypeDef * hhash); /*!< HASH Msp DeInit callback */
+
+#endif /* (USE_HAL_HASH_REGISTER_CALLBACKS) */
+} HASH_HandleTypeDef;
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
+/**
+  * @brief  HAL HASH Callback pointer definition
+  */
+typedef  void (*pHASH_CallbackTypeDef)(HASH_HandleTypeDef * hhash); /*!< pointer to a HASH common callback functions */
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Constants  HASH Exported Constants
+  * @{
+  */
+
+/** @defgroup HASH_Algo_Selection   HASH algorithm selection
+  * @{
+  */
+#define HASH_ALGOSELECTION_SHA1      0x00000000U /*!< HASH function is SHA1   */
+#define HASH_ALGOSELECTION_MD5       HASH_CR_ALGO_0     /*!< HASH function is MD5    */
+#define HASH_ALGOSELECTION_SHA224    HASH_CR_ALGO_1     /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256    HASH_CR_ALGO       /*!< HASH function is SHA256 */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Algorithm_Mode   HASH algorithm mode
+  * @{
+  */
+#define HASH_ALGOMODE_HASH         0x00000000U /*!< Algorithm is HASH */
+#define HASH_ALGOMODE_HMAC         HASH_CR_MODE           /*!< Algorithm is HMAC */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Data_Type      HASH input data type
+  * @{
+  */
+#define HASH_DATATYPE_32B          0x00000000U /*!< 32-bit data. No swapping                     */
+#define HASH_DATATYPE_16B          HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped       */
+#define HASH_DATATYPE_8B           HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped            */
+#define HASH_DATATYPE_1B           HASH_CR_DATATYPE   /*!< 1-bit data. In the word all bits are swapped */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode   HMAC key length type
+  * @{
+  */
+#define HASH_HMAC_KEYTYPE_SHORTKEY      0x00000000U /*!< HMAC Key size is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY       HASH_CR_LKEY           /*!< HMAC Key size is > 64 bytes  */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_flags_definition  HASH flags definitions
+  * @{
+  */
+#define HASH_FLAG_DINIS            HASH_SR_DINIS  /*!< 16 locations are free in the DIN : a new block can be entered in the Peripheral */
+#define HASH_FLAG_DCIS             HASH_SR_DCIS   /*!< Digest calculation complete                                                     */
+#define HASH_FLAG_DMAS             HASH_SR_DMAS   /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing                      */
+#define HASH_FLAG_BUSY             HASH_SR_BUSY   /*!< The hash core is Busy, processing a block of data                               */
+#define HASH_FLAG_DINNE            HASH_CR_DINNE  /*!< DIN not empty : the input buffer contains at least one word of data             */
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_interrupts_definition   HASH interrupts definitions
+  * @{
+  */
+#define HASH_IT_DINI               HASH_IMR_DINIE  /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI                HASH_IMR_DCIE   /*!< Digest calculation complete                            */
+
+/**
+  * @}
+  */
+/** @defgroup HASH_alias HASH API alias
+  * @{
+  */
+#define HAL_HASHEx_IRQHandler   HAL_HASH_IRQHandler  /*!< HAL_HASHEx_IRQHandler() is re-directed to HAL_HASH_IRQHandler() for compatibility with legacy code */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Error_Definition   HASH Error Definition
+  * @{
+  */
+#define  HAL_HASH_ERROR_NONE             0x00000000U   /*!< No error                */
+#define  HAL_HASH_ERROR_IT               0x00000001U   /*!< IT-based process error  */
+#define  HAL_HASH_ERROR_DMA              0x00000002U   /*!< DMA-based process error */
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1U)
+#define  HAL_HASH_ERROR_INVALID_CALLBACK 0x00000004U   /*!< Invalid Callback error  */
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+  * @{
+  */
+
+/** @brief  Check whether or not the specified HASH flag is set.
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer.
+  *            @arg @ref HASH_FLAG_DCIS Digest calculation complete.
+  *            @arg @ref HASH_FLAG_DMAS DMA interface is enabled (DMAE=1) or a transfer is ongoing.
+  *            @arg @ref HASH_FLAG_BUSY The hash core is Busy : processing a block of data.
+  *            @arg @ref HASH_FLAG_DINNE DIN not empty : the input buffer contains at least one word of data.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_HASH_GET_FLAG(__FLAG__)  (((__FLAG__) > 8U)  ?                    \
+                                       ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
+                                       ((HASH->SR & (__FLAG__)) == (__FLAG__)) )
+
+
+/** @brief  Clear the specified HASH flag.
+  * @param  __FLAG__ specifies the flag to clear.
+  *        This parameter can be one of the following values:
+  *            @arg @ref HASH_FLAG_DINIS A new block can be entered into the input buffer.
+  *            @arg @ref HASH_FLAG_DCIS Digest calculation complete
+  * @retval None
+  */
+#define __HAL_HASH_CLEAR_FLAG(__FLAG__) CLEAR_BIT(HASH->SR, (__FLAG__))
+
+
+/** @brief  Enable the specified HASH interrupt.
+  * @param  __INTERRUPT__ specifies the HASH interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg @ref HASH_IT_DINI  A new block can be entered into the input buffer (DIN)
+  *            @arg @ref HASH_IT_DCI   Digest calculation complete
+  * @retval None
+  */
+#define __HAL_HASH_ENABLE_IT(__INTERRUPT__)   SET_BIT(HASH->IMR, (__INTERRUPT__))
+
+/** @brief  Disable the specified HASH interrupt.
+  * @param  __INTERRUPT__ specifies the HASH interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg @ref HASH_IT_DINI  A new block can be entered into the input buffer (DIN)
+  *            @arg @ref HASH_IT_DCI   Digest calculation complete
+  * @retval None
+  */
+#define __HAL_HASH_DISABLE_IT(__INTERRUPT__)   CLEAR_BIT(HASH->IMR, (__INTERRUPT__))
+
+/** @brief Reset HASH handle state.
+  * @param  __HANDLE__ HASH handle.
+  * @retval None
+  */
+
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) do{\
+                                                      (__HANDLE__)->State = HAL_HASH_STATE_RESET;\
+                                                      (__HANDLE__)->MspInitCallback = NULL;      \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;    \
+                                                     }while(0)
+#else
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+
+/** @brief Reset HASH handle status.
+  * @param  __HANDLE__ HASH handle.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_HANDLE_STATUS(__HANDLE__) ((__HANDLE__)->Status = HAL_OK)
+
+/**
+  * @brief  Enable the multi-buffer DMA transfer mode.
+  * @note   This bit is set when hashing large files when multiple DMA transfers are needed.
+  * @retval None
+  */
+#define __HAL_HASH_SET_MDMAT()          SET_BIT(HASH->CR, HASH_CR_MDMAT)
+
+/**
+  * @brief  Disable the multi-buffer DMA transfer mode.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_MDMAT()        CLEAR_BIT(HASH->CR, HASH_CR_MDMAT)
+
+
+/**
+  * @brief Start the digest computation.
+  * @retval None
+  */
+#define __HAL_HASH_START_DIGEST()       SET_BIT(HASH->STR, HASH_STR_DCAL)
+
+/**
+  * @brief Set the number of valid bits in the last word written in data register DIN.
+  * @param  __SIZE__ size in bytes of last data written in Data register.
+  * @retval None
+*/
+#define  __HAL_HASH_SET_NBVALIDBITS(__SIZE__)    MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8U * ((__SIZE__) % 4U))
+
+/**
+  * @brief Reset the HASH core.
+  * @retval None
+  */
+#define __HAL_HASH_INIT()       SET_BIT(HASH->CR, HASH_CR_INIT)
+
+/**
+  * @}
+  */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros   HASH Private Macros
+  * @{
+  */
+/**
+  * @brief  Return digest length in bytes.
+  * @retval Digest length
+  */
+#define HASH_DIGEST_LENGTH() ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA1)   ?  20U : \
+                             ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA224) ?  28U : \
+                             ((READ_BIT(HASH->CR, HASH_CR_ALGO) == HASH_ALGOSELECTION_SHA256) ?  32U : 16U ) ) )
+/**
+  * @brief  Return number of words already pushed in the FIFO.
+  * @retval Number of words already pushed in the FIFO
+  */
+#define HASH_NBW_PUSHED() ((READ_BIT(HASH->CR, HASH_CR_NBW)) >> 8U)
+
+/**
+  * @brief Ensure that HASH input data type is valid.
+  * @param __DATATYPE__ HASH input data type.
+  * @retval SET (__DATATYPE__ is valid) or RESET (__DATATYPE__ is invalid)
+  */
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+                                        ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+/**
+  * @brief Ensure that input data buffer size is valid for multi-buffer HASH
+  *        processing in DMA mode.
+  * @note  This check is valid only for multi-buffer HASH processing in DMA mode.
+  * @param __SIZE__ input data buffer size.
+  * @retval SET (__SIZE__ is valid) or RESET (__SIZE__ is invalid)
+  */
+#define IS_HASH_DMA_MULTIBUFFER_SIZE(__SIZE__)  ((READ_BIT(HASH->CR, HASH_CR_MDMAT) == 0U) || (((__SIZE__) % 4U) == 0U))
+
+/**
+  * @brief Ensure that input data buffer size is valid for multi-buffer HMAC
+  *        processing in DMA mode.
+  * @note  This check is valid only for multi-buffer HMAC processing in DMA mode.
+  * @param __HANDLE__ HASH handle.
+  * @param __SIZE__ input data buffer size.
+  * @retval SET (__SIZE__ is valid) or RESET (__SIZE__ is invalid)
+  */
+#define IS_HMAC_DMA_MULTIBUFFER_SIZE(__HANDLE__,__SIZE__)  ((((__HANDLE__)->DigestCalculationDisable) == RESET) || (((__SIZE__) % 4U) == 0U))
+/**
+  * @brief Ensure that handle phase is set to HASH processing.
+  * @param __HANDLE__ HASH handle.
+  * @retval SET (handle phase is set to HASH processing) or RESET (handle phase is not set to HASH processing)
+  */
+#define IS_HASH_PROCESSING(__HANDLE__)  ((__HANDLE__)->Phase == HAL_HASH_PHASE_PROCESS)
+
+/**
+  * @brief Ensure that handle phase is set to HMAC processing.
+  * @param __HANDLE__ HASH handle.
+  * @retval SET (handle phase is set to HMAC processing) or RESET (handle phase is not set to HMAC processing)
+  */
+#define IS_HMAC_PROCESSING(__HANDLE__)  (((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_1) || \
+                                         ((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_2) || \
+                                         ((__HANDLE__)->Phase == HAL_HASH_PHASE_HMAC_STEP_3))
+
+/**
+  * @}
+  */
+
+/* Include HASH HAL Extended module */
+#include "stm32h7xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup HASH_Exported_Functions HASH Exported Functions
+  * @{
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization methods  **********************************/
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_HASH_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_HASH_RegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID, pHASH_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_HASH_UnRegisterCallback(HASH_HandleTypeDef *hhash, HAL_HASH_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_HASH_REGISTER_CALLBACKS */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group2 HASH processing functions in polling mode
+  * @{
+  */
+
+
+/* HASH processing using polling  *********************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group3 HASH processing functions in interrupt mode
+  * @{
+  */
+
+/* HASH processing using IT  **************************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group4 HASH processing functions in DMA mode
+  * @{
+  */
+
+/* HASH processing using DMA  *************************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group5 HMAC processing functions in polling mode
+  * @{
+  */
+
+/* HASH-MAC processing using polling  *****************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group6 HMAC processing functions in interrupt mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group7 HMAC processing functions in DMA mode
+  * @{
+  */
+
+/* HASH-HMAC processing using DMA  ********************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group8 Peripheral states functions
+  * @{
+  */
+
+
+/* Peripheral State methods  **************************************************/
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_GetStatus(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ContextSaving(HASH_HandleTypeDef *hhash, uint8_t* pMemBuffer);
+void HAL_HASH_ContextRestoring(HASH_HandleTypeDef *hhash, uint8_t* pMemBuffer);
+void HAL_HASH_SwFeed_ProcessSuspend(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DMAFeed_ProcessSuspend(HASH_HandleTypeDef *hhash);
+uint32_t HAL_HASH_GetError(HASH_HandleTypeDef *hhash);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions -----------------------------------------------------------*/
+
+/** @addtogroup HASH_Private_Functions HASH Private Functions
+  * @{
+  */
+
+/* Private functions */
+HAL_StatusTypeDef HASH_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout, uint32_t Algorithm);
+HAL_StatusTypeDef HASH_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
+HAL_StatusTypeDef HASH_Accumulate_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
+HAL_StatusTypeDef HASH_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Algorithm);
+HAL_StatusTypeDef HASH_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
+HAL_StatusTypeDef HASH_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HMAC_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout, uint32_t Algorithm);
+HAL_StatusTypeDef HMAC_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Algorithm);
+HAL_StatusTypeDef HMAC_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint32_t Algorithm);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /*  HASH*/
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hash_ex.h

@@ -0,0 +1,165 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_hash_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of HASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_HASH_EX_H
+#define STM32H7xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+#if defined (HASH)
+/** @addtogroup HASHEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup HASHEx_Exported_Functions HASH Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group1 HASH extended processing functions in polling mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group2 HASH extended processing functions in interrupt mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accmlt_End_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group3 HASH extended processing functions in DMA mode
+  * @{
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group4 HMAC extended processing functions in polling mode
+  * @{
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group5 HMAC extended processing functions in interrupt mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group6 HMAC extended processing functions in DMA mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HASHEx_Exported_Functions_Group7 Multi-buffer HMAC extended processing functions in DMA mode
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_HMACEx_MD5_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+HAL_StatusTypeDef HAL_HMACEx_SHA1_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /*  HASH*/
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hcd.h

@@ -0,0 +1,320 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_hcd.h
+  * @author  MCD Application Team
+  * @brief   Header file of HCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_HCD_H
+#define STM32H7xx_HAL_HCD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_usb.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_HCD_STATE_RESET    = 0x00,
+  HAL_HCD_STATE_READY    = 0x01,
+  HAL_HCD_STATE_ERROR    = 0x02,
+  HAL_HCD_STATE_BUSY     = 0x03,
+  HAL_HCD_STATE_TIMEOUT  = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef   HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef      HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef       HCD_HCTypeDef;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef;
+typedef USB_OTG_HCStateTypeDef  HCD_HCStateTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+  * @{
+  */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+typedef struct __HCD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+{
+  HCD_TypeDef               *Instance;  /*!< Register base address    */
+  HCD_InitTypeDef           Init;       /*!< HCD required parameters  */
+  HCD_HCTypeDef             hc[16];     /*!< Host channels parameters */
+  HAL_LockTypeDef           Lock;       /*!< HCD peripheral status    */
+  __IO HCD_StateTypeDef     State;      /*!< HCD communication state  */
+  __IO  uint32_t            ErrorCode;  /*!< HCD Error code           */
+  void                      *pData;     /*!< Pointer Stack Handler    */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+  void (* SOFCallback)(struct __HCD_HandleTypeDef *hhcd);                               /*!< USB OTG HCD SOF callback                */
+  void (* ConnectCallback)(struct __HCD_HandleTypeDef *hhcd);                           /*!< USB OTG HCD Connect callback            */
+  void (* DisconnectCallback)(struct __HCD_HandleTypeDef *hhcd);                        /*!< USB OTG HCD Disconnect callback         */
+  void (* PortEnabledCallback)(struct __HCD_HandleTypeDef *hhcd);                       /*!< USB OTG HCD Port Enable callback        */
+  void (* PortDisabledCallback)(struct __HCD_HandleTypeDef *hhcd);                      /*!< USB OTG HCD Port Disable callback       */
+  void (* HC_NotifyURBChangeCallback)(struct __HCD_HandleTypeDef *hhcd, uint8_t chnum,
+                                      HCD_URBStateTypeDef urb_state);                   /*!< USB OTG HCD Host Channel Notify URB Change callback  */
+
+  void (* MspInitCallback)(struct __HCD_HandleTypeDef *hhcd);                           /*!< USB OTG HCD Msp Init callback           */
+  void (* MspDeInitCallback)(struct __HCD_HandleTypeDef *hhcd);                         /*!< USB OTG HCD Msp DeInit callback         */
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+} HCD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+  * @{
+  */
+
+/** @defgroup HCD_Speed HCD Speed
+  * @{
+  */
+#define HCD_SPEED_HIGH               USBH_HS_SPEED
+#define HCD_SPEED_FULL               USBH_FSLS_SPEED
+#define HCD_SPEED_LOW                USBH_FSLS_SPEED
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+  * @{
+  */
+#define HCD_PHY_ULPI                 1U
+#define HCD_PHY_EMBEDDED             2U
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Error_Code_definition HCD Error Code definition
+  * @brief  HCD Error Code definition
+  * @{
+  */
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+#define  HAL_HCD_ERROR_INVALID_CALLBACK                        (0x00000010U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__)                   (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__)                  (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__)  (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum)             (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum)           (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum)              (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum)            (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                  uint8_t epnum, uint8_t dev_address,
+                                  uint8_t speed, uint8_t ep_type, uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+void              HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void              HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+
+#if (USE_HAL_HCD_REGISTER_CALLBACKS == 1U)
+/** @defgroup HAL_HCD_Callback_ID_enumeration_definition HAL USB OTG HCD Callback ID enumeration definition
+  * @brief  HAL USB OTG HCD Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_HCD_SOF_CB_ID            = 0x01,       /*!< USB HCD SOF callback ID           */
+  HAL_HCD_CONNECT_CB_ID        = 0x02,       /*!< USB HCD Connect callback ID       */
+  HAL_HCD_DISCONNECT_CB_ID     = 0x03,       /*!< USB HCD Disconnect callback ID    */
+  HAL_HCD_PORT_ENABLED_CB_ID   = 0x04,       /*!< USB HCD Port Enable callback ID   */
+  HAL_HCD_PORT_DISABLED_CB_ID  = 0x05,       /*!< USB HCD Port Disable callback ID  */
+
+  HAL_HCD_MSPINIT_CB_ID        = 0x06,       /*!< USB HCD MspInit callback ID       */
+  HAL_HCD_MSPDEINIT_CB_ID      = 0x07        /*!< USB HCD MspDeInit callback ID     */
+
+} HAL_HCD_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HCD_Callback_pointer_definition HAL USB OTG HCD Callback pointer definition
+  * @brief  HAL USB OTG HCD Callback pointer definition
+  * @{
+  */
+
+typedef void (*pHCD_CallbackTypeDef)(HCD_HandleTypeDef *hhcd);                   /*!< pointer to a common USB OTG HCD callback function  */
+typedef void (*pHCD_HC_NotifyURBChangeCallbackTypeDef)(HCD_HandleTypeDef *hhcd,
+                                                       uint8_t epnum,
+                                                       HCD_URBStateTypeDef urb_state);   /*!< pointer to USB OTG HCD host channel  callback */
+/**
+  * @}
+  */
+
+HAL_StatusTypeDef HAL_HCD_RegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID, pHCD_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_HCD_UnRegisterCallback(HCD_HandleTypeDef *hhcd, HAL_HCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_HCD_RegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd, pHCD_HC_NotifyURBChangeCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_HCD_UnRegisterHC_NotifyURBChangeCallback(HCD_HandleTypeDef *hhcd);
+#endif /* USE_HAL_HCD_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, uint8_t ch_num,
+                                           uint8_t direction, uint8_t ep_type,
+                                           uint8_t token, uint8_t *pbuff,
+                                           uint16_t length, uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_PortEnabled_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_PortDisabled_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum,
+                                         HCD_URBStateTypeDef urb_state);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HCD_StateTypeDef        HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef     HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef      HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t                HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup HCD_Private_Functions_Prototypes HCD Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h

@@ -0,0 +1,214 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_hsem.h
+  * @author  MCD Application Team
+  * @brief   Header file of HSEM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_HSEM_H
+#define STM32H7xx_HAL_HSEM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+   * @{
+   */
+
+/** @addtogroup HSEM
+   * @{
+   */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HSEM_Exported_Macros HSEM Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  SemID to mask helper Macro.
+  * @param  __SEMID__: semaphore ID from 0 to 31
+  * @retval Semaphore Mask.
+  */
+#define __HAL_HSEM_SEMID_TO_MASK(__SEMID__) (1 << (__SEMID__))
+
+/**
+  * @brief  Enables the specified HSEM interrupts.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                            (HSEM->C1IER |= (__SEM_MASK__)) : \
+                                            (HSEM->C2IER |= (__SEM_MASK__)))
+#else
+#define __HAL_HSEM_ENABLE_IT(__SEM_MASK__) (HSEM->IER |= (__SEM_MASK__))
+#endif /* DUAL_CORE */
+/**
+  * @brief  Disables the specified HSEM interrupts.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                             (HSEM->C1IER &= ~(__SEM_MASK__)) :       \
+                                             (HSEM->C2IER &= ~(__SEM_MASK__)))
+#else
+#define __HAL_HSEM_DISABLE_IT(__SEM_MASK__) (HSEM->IER &= ~(__SEM_MASK__))
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Checks whether interrupt has occurred or not for semaphores specified by a mask.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval semaphores Mask : Semaphores where an interrupt occurred.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                         ((__SEM_MASK__) & HSEM->C1MISR) :        \
+                                         ((__SEM_MASK__) & HSEM->C2MISR1))
+#else
+#define __HAL_HSEM_GET_IT(__SEM_MASK__) ((__SEM_MASK__) & HSEM->MISR)
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Get the semaphores release status flags.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval semaphores Mask : Semaphores where Release flags rise.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                           (__SEM_MASK__) & HSEM->C1ISR :           \
+                                           (__SEM_MASK__) & HSEM->C2ISR)
+#else
+#define __HAL_HSEM_GET_FLAG(__SEM_MASK__) ((__SEM_MASK__) & HSEM->ISR)
+#endif /* DUAL_CORE */
+
+/**
+  * @brief  Clears the HSEM Interrupt flags.
+  * @param  __SEM_MASK__: semaphores Mask
+  * @retval None.
+  */
+#if defined(DUAL_CORE)
+#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) ((((SCB->CPUID & 0x000000F0) >> 4 )== 0x7) ? \
+                                             (HSEM->C1ICR |= (__SEM_MASK__)) :        \
+                                             (HSEM->C2ICR |= (__SEM_MASK__)))
+#else
+#define __HAL_HSEM_CLEAR_FLAG(__SEM_MASK__) (HSEM->ICR |= (__SEM_MASK__))
+#endif /* DUAL_CORE */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HSEM_Exported_Functions HSEM Exported Functions
+  * @{
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group1 Take and Release functions
+  * @brief    HSEM Take and Release functions
+  * @{
+  */
+
+/* HSEM semaphore take (lock) using 2-Step  method ****************************/
+HAL_StatusTypeDef  HAL_HSEM_Take(uint32_t SemID, uint32_t ProcessID);
+/* HSEM semaphore fast take (lock) using 1-Step  method ***********************/
+HAL_StatusTypeDef  HAL_HSEM_FastTake(uint32_t SemID);
+/* HSEM Check semaphore state Taken or not   **********************************/
+uint32_t HAL_HSEM_IsSemTaken(uint32_t SemID);
+/* HSEM Release  **************************************************************/
+void  HAL_HSEM_Release(uint32_t SemID, uint32_t ProcessID);
+/* HSEM Release All************************************************************/
+void HAL_HSEM_ReleaseAll(uint32_t Key, uint32_t CoreID);
+
+/**
+  * @}
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group2 HSEM Set and Get Key functions
+  * @brief    HSEM Set and Get Key functions.
+  * @{
+  */
+/* HSEM Set Clear Key *********************************************************/
+void  HAL_HSEM_SetClearKey(uint32_t Key);
+/* HSEM Get Clear Key *********************************************************/
+uint32_t HAL_HSEM_GetClearKey(void);
+/**
+  * @}
+  */
+
+/** @addtogroup HSEM_Exported_Functions_Group3
+  * @brief   HSEM Notification functions
+  * @{
+  */
+/* HSEM Activate HSEM Notification (When a semaphore is released) ) *****************/
+void HAL_HSEM_ActivateNotification(uint32_t SemMask);
+/* HSEM Deactivate HSEM Notification (When a semaphore is released)  ****************/
+void HAL_HSEM_DeactivateNotification(uint32_t SemMask);
+/* HSEM Free Callback (When a semaphore is released)  *******************************/
+void HAL_HSEM_FreeCallback(uint32_t SemMask);
+/* HSEM IRQ Handler  **********************************************************/
+void HAL_HSEM_IRQHandler(void);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HSEM_Private_Macros HSEM Private Macros
+  * @{
+  */
+
+#define IS_HSEM_SEMID(__SEMID__) ((__SEMID__) <= HSEM_SEMID_MAX )
+
+#define IS_HSEM_PROCESSID(__PROCESSID__) ((__PROCESSID__) <= HSEM_PROCESSID_MAX )
+
+#define IS_HSEM_KEY(__KEY__) ((__KEY__) <= HSEM_CLEAR_KEY_MAX )
+
+#if defined(DUAL_CORE)
+#define IS_HSEM_COREID(__COREID__) (((__COREID__) == HSEM_CPU1_COREID) || \
+                                    ((__COREID__) == HSEM_CPU2_COREID))
+#else
+#define IS_HSEM_COREID(__COREID__) ((__COREID__) == HSEM_CPU1_COREID)
+#endif
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_HSEM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h

@@ -0,0 +1,782 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_i2c.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_I2C_H
+#define STM32H7xx_HAL_I2C_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+  * @{
+  */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+  * @brief  I2C Configuration Structure definition
+  * @{
+  */
+typedef struct
+{
+  uint32_t Timing;              /*!< Specifies the I2C_TIMINGR_register value.
+                                  This parameter calculated by referring to I2C initialization
+                                         section in Reference manual */
+
+  uint32_t OwnAddress1;         /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_ADDRESSING_MODE */
+
+  uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_DUAL_ADDRESSING_MODE */
+
+  uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t OwnAddress2Masks;    /*!< Specifies the acknowledge mask address second device own address if dual addressing mode is selected
+                                  This parameter can be a value of @ref I2C_OWN_ADDRESS2_MASKS */
+
+  uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref I2C_GENERAL_CALL_ADDRESSING_MODE */
+
+  uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref I2C_NOSTRETCH_MODE */
+
+} I2C_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+  * @brief  HAL State structure definition
+  * @note  HAL I2C State value coding follow below described bitmap :\n
+  *          b7-b6  Error information\n
+  *             00 : No Error\n
+  *             01 : Abort (Abort user request on going)\n
+  *             10 : Timeout\n
+  *             11 : Error\n
+  *          b5     Peripheral initialization status\n
+  *             0  : Reset (peripheral not initialized)\n
+  *             1  : Init done (peripheral initialized and ready to use. HAL I2C Init function called)\n
+  *          b4     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b3\n
+  *             0  : Ready or Busy (No Listen mode ongoing)\n
+  *             1  : Listen (peripheral in Address Listen Mode)\n
+  *          b2     Intrinsic process state\n
+  *             0  : Ready\n
+  *             1  : Busy (peripheral busy with some configuration or internal operations)\n
+  *          b1     Rx state\n
+  *             0  : Ready (no Rx operation ongoing)\n
+  *             1  : Busy (Rx operation ongoing)\n
+  *          b0     Tx state\n
+  *             0  : Ready (no Tx operation ongoing)\n
+  *             1  : Busy (Tx operation ongoing)
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_STATE_RESET             = 0x00U,   /*!< Peripheral is not yet Initialized         */
+  HAL_I2C_STATE_READY             = 0x20U,   /*!< Peripheral Initialized and ready for use  */
+  HAL_I2C_STATE_BUSY              = 0x24U,   /*!< An internal process is ongoing            */
+  HAL_I2C_STATE_BUSY_TX           = 0x21U,   /*!< Data Transmission process is ongoing      */
+  HAL_I2C_STATE_BUSY_RX           = 0x22U,   /*!< Data Reception process is ongoing         */
+  HAL_I2C_STATE_LISTEN            = 0x28U,   /*!< Address Listen Mode is ongoing            */
+  HAL_I2C_STATE_BUSY_TX_LISTEN    = 0x29U,   /*!< Address Listen Mode and Data Transmission
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_BUSY_RX_LISTEN    = 0x2AU,   /*!< Address Listen Mode and Data Reception
+                                                 process is ongoing                         */
+  HAL_I2C_STATE_ABORT             = 0x60U,   /*!< Abort user request ongoing                */
+  HAL_I2C_STATE_TIMEOUT           = 0xA0U,   /*!< Timeout state                             */
+  HAL_I2C_STATE_ERROR             = 0xE0U    /*!< Error                                     */
+
+} HAL_I2C_StateTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_mode_structure_definition HAL mode structure definition
+  * @brief  HAL Mode structure definition
+  * @note  HAL I2C Mode value coding follow below described bitmap :\n
+  *          b7     (not used)\n
+  *             x  : Should be set to 0\n
+  *          b6\n
+  *             0  : None\n
+  *             1  : Memory (HAL I2C communication is in Memory Mode)\n
+  *          b5\n
+  *             0  : None\n
+  *             1  : Slave (HAL I2C communication is in Slave Mode)\n
+  *          b4\n
+  *             0  : None\n
+  *             1  : Master (HAL I2C communication is in Master Mode)\n
+  *          b3-b2-b1-b0  (not used)\n
+  *             xxxx : Should be set to 0000
+  * @{
+  */
+typedef enum
+{
+  HAL_I2C_MODE_NONE               = 0x00U,   /*!< No I2C communication on going             */
+  HAL_I2C_MODE_MASTER             = 0x10U,   /*!< I2C communication is in Master Mode       */
+  HAL_I2C_MODE_SLAVE              = 0x20U,   /*!< I2C communication is in Slave Mode        */
+  HAL_I2C_MODE_MEM                = 0x40U    /*!< I2C communication is in Memory Mode       */
+
+} HAL_I2C_ModeTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+  * @brief  I2C Error Code definition
+  * @{
+  */
+#define HAL_I2C_ERROR_NONE      (0x00000000U)    /*!< No error              */
+#define HAL_I2C_ERROR_BERR      (0x00000001U)    /*!< BERR error            */
+#define HAL_I2C_ERROR_ARLO      (0x00000002U)    /*!< ARLO error            */
+#define HAL_I2C_ERROR_AF        (0x00000004U)    /*!< ACKF error            */
+#define HAL_I2C_ERROR_OVR       (0x00000008U)    /*!< OVR error             */
+#define HAL_I2C_ERROR_DMA       (0x00000010U)    /*!< DMA transfer error    */
+#define HAL_I2C_ERROR_TIMEOUT   (0x00000020U)    /*!< Timeout error         */
+#define HAL_I2C_ERROR_SIZE      (0x00000040U)    /*!< Size Management error */
+#define HAL_I2C_ERROR_DMA_PARAM (0x00000080U)    /*!< DMA Parameter Error   */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define HAL_I2C_ERROR_INVALID_CALLBACK  (0x00000100U)    /*!< Invalid Callback error */
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+#define HAL_I2C_ERROR_INVALID_PARAM     (0x00000200U)    /*!< Invalid Parameters error  */
+/**
+  * @}
+  */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+  * @brief  I2C handle Structure definition
+  * @{
+  */
+typedef struct __I2C_HandleTypeDef
+{
+  I2C_TypeDef                *Instance;      /*!< I2C registers base address                */
+
+  I2C_InitTypeDef            Init;           /*!< I2C communication parameters              */
+
+  uint8_t                    *pBuffPtr;      /*!< Pointer to I2C transfer buffer            */
+
+  uint16_t                   XferSize;       /*!< I2C transfer size                         */
+
+  __IO uint16_t              XferCount;      /*!< I2C transfer counter                      */
+
+  __IO uint32_t              XferOptions;    /*!< I2C sequantial transfer options, this parameter can
+                                                  be a value of @ref I2C_XFEROPTIONS */
+
+  __IO uint32_t              PreviousState;  /*!< I2C communication Previous state          */
+
+  HAL_StatusTypeDef(*XferISR)(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);  /*!< I2C transfer IRQ handler function pointer */
+
+  DMA_HandleTypeDef          *hdmatx;        /*!< I2C Tx DMA handle parameters              */
+
+  DMA_HandleTypeDef          *hdmarx;        /*!< I2C Rx DMA handle parameters              */
+
+  HAL_LockTypeDef            Lock;           /*!< I2C locking object                        */
+
+  __IO HAL_I2C_StateTypeDef  State;          /*!< I2C communication state                   */
+
+  __IO HAL_I2C_ModeTypeDef   Mode;           /*!< I2C communication mode                    */
+
+  __IO uint32_t              ErrorCode;      /*!< I2C Error code                            */
+
+  __IO uint32_t              AddrEventCount; /*!< I2C Address Event counter                 */
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+  void (* MasterTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Tx Transfer completed callback */
+  void (* MasterRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);           /*!< I2C Master Rx Transfer completed callback */
+  void (* SlaveTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Tx Transfer completed callback  */
+  void (* SlaveRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);            /*!< I2C Slave Rx Transfer completed callback  */
+  void (* ListenCpltCallback)(struct __I2C_HandleTypeDef *hi2c);             /*!< I2C Listen Complete callback              */
+  void (* MemTxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Tx Transfer completed callback */
+  void (* MemRxCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Memory Rx Transfer completed callback */
+  void (* ErrorCallback)(struct __I2C_HandleTypeDef *hi2c);                  /*!< I2C Error callback                        */
+  void (* AbortCpltCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Abort callback                        */
+
+  void (* AddrCallback)(struct __I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);  /*!< I2C Slave Address Match callback */
+
+  void (* MspInitCallback)(struct __I2C_HandleTypeDef *hi2c);                /*!< I2C Msp Init callback                     */
+  void (* MspDeInitCallback)(struct __I2C_HandleTypeDef *hi2c);              /*!< I2C Msp DeInit callback                   */
+
+#endif  /* USE_HAL_I2C_REGISTER_CALLBACKS */
+} I2C_HandleTypeDef;
+
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL I2C Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_I2C_MASTER_TX_COMPLETE_CB_ID      = 0x00U,    /*!< I2C Master Tx Transfer completed callback ID  */
+  HAL_I2C_MASTER_RX_COMPLETE_CB_ID      = 0x01U,    /*!< I2C Master Rx Transfer completed callback ID  */
+  HAL_I2C_SLAVE_TX_COMPLETE_CB_ID       = 0x02U,    /*!< I2C Slave Tx Transfer completed callback ID   */
+  HAL_I2C_SLAVE_RX_COMPLETE_CB_ID       = 0x03U,    /*!< I2C Slave Rx Transfer completed callback ID   */
+  HAL_I2C_LISTEN_COMPLETE_CB_ID         = 0x04U,    /*!< I2C Listen Complete callback ID               */
+  HAL_I2C_MEM_TX_COMPLETE_CB_ID         = 0x05U,    /*!< I2C Memory Tx Transfer callback ID            */
+  HAL_I2C_MEM_RX_COMPLETE_CB_ID         = 0x06U,    /*!< I2C Memory Rx Transfer completed callback ID  */
+  HAL_I2C_ERROR_CB_ID                   = 0x07U,    /*!< I2C Error callback ID                         */
+  HAL_I2C_ABORT_CB_ID                   = 0x08U,    /*!< I2C Abort callback ID                         */
+
+  HAL_I2C_MSPINIT_CB_ID                 = 0x09U,    /*!< I2C Msp Init callback ID                      */
+  HAL_I2C_MSPDEINIT_CB_ID               = 0x0AU     /*!< I2C Msp DeInit callback ID                    */
+
+} HAL_I2C_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2C Callback pointer definition
+  */
+typedef  void (*pI2C_CallbackTypeDef)(I2C_HandleTypeDef *hi2c); /*!< pointer to an I2C callback function */
+typedef  void (*pI2C_AddrCallbackTypeDef)(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode); /*!< pointer to an I2C Address Match callback function */
+
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2C_XFEROPTIONS  I2C Sequential Transfer Options
+  * @{
+  */
+#define I2C_FIRST_FRAME                 ((uint32_t)I2C_SOFTEND_MODE)
+#define I2C_FIRST_AND_NEXT_FRAME        ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_NEXT_FRAME                  ((uint32_t)(I2C_RELOAD_MODE | I2C_SOFTEND_MODE))
+#define I2C_FIRST_AND_LAST_FRAME        ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME                  ((uint32_t)I2C_AUTOEND_MODE)
+#define I2C_LAST_FRAME_NO_STOP          ((uint32_t)I2C_SOFTEND_MODE)
+
+/* List of XferOptions in usage of :
+ * 1- Restart condition in all use cases (direction change or not)
+ */
+#define  I2C_OTHER_FRAME                (0x000000AAU)
+#define  I2C_OTHER_AND_LAST_FRAME       (0x0000AA00U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_ADDRESSING_MODE I2C Addressing Mode
+  * @{
+  */
+#define I2C_ADDRESSINGMODE_7BIT         (0x00000001U)
+#define I2C_ADDRESSINGMODE_10BIT        (0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_DUAL_ADDRESSING_MODE I2C Dual Addressing Mode
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLE         (0x00000000U)
+#define I2C_DUALADDRESS_ENABLE          I2C_OAR2_OA2EN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_OWN_ADDRESS2_MASKS I2C Own Address2 Masks
+  * @{
+  */
+#define I2C_OA2_NOMASK                  ((uint8_t)0x00U)
+#define I2C_OA2_MASK01                  ((uint8_t)0x01U)
+#define I2C_OA2_MASK02                  ((uint8_t)0x02U)
+#define I2C_OA2_MASK03                  ((uint8_t)0x03U)
+#define I2C_OA2_MASK04                  ((uint8_t)0x04U)
+#define I2C_OA2_MASK05                  ((uint8_t)0x05U)
+#define I2C_OA2_MASK06                  ((uint8_t)0x06U)
+#define I2C_OA2_MASK07                  ((uint8_t)0x07U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_GENERAL_CALL_ADDRESSING_MODE I2C General Call Addressing Mode
+  * @{
+  */
+#define I2C_GENERALCALL_DISABLE         (0x00000000U)
+#define I2C_GENERALCALL_ENABLE          I2C_CR1_GCEN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_NOSTRETCH_MODE I2C No-Stretch Mode
+  * @{
+  */
+#define I2C_NOSTRETCH_DISABLE           (0x00000000U)
+#define I2C_NOSTRETCH_ENABLE            I2C_CR1_NOSTRETCH
+/**
+  * @}
+  */
+
+/** @defgroup I2C_MEMORY_ADDRESS_SIZE I2C Memory Address Size
+  * @{
+  */
+#define I2C_MEMADD_SIZE_8BIT            (0x00000001U)
+#define I2C_MEMADD_SIZE_16BIT           (0x00000002U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_XFERDIRECTION I2C Transfer Direction Master Point of View
+  * @{
+  */
+#define I2C_DIRECTION_TRANSMIT          (0x00000000U)
+#define I2C_DIRECTION_RECEIVE           (0x00000001U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_RELOAD_END_MODE I2C Reload End Mode
+  * @{
+  */
+#define  I2C_RELOAD_MODE                I2C_CR2_RELOAD
+#define  I2C_AUTOEND_MODE               I2C_CR2_AUTOEND
+#define  I2C_SOFTEND_MODE               (0x00000000U)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_START_STOP_MODE I2C Start or Stop Mode
+  * @{
+  */
+#define  I2C_NO_STARTSTOP               (0x00000000U)
+#define  I2C_GENERATE_STOP              (uint32_t)(0x80000000U | I2C_CR2_STOP)
+#define  I2C_GENERATE_START_READ        (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
+#define  I2C_GENERATE_START_WRITE       (uint32_t)(0x80000000U | I2C_CR2_START)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @brief I2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define I2C_IT_ERRI                     I2C_CR1_ERRIE
+#define I2C_IT_TCI                      I2C_CR1_TCIE
+#define I2C_IT_STOPI                    I2C_CR1_STOPIE
+#define I2C_IT_NACKI                    I2C_CR1_NACKIE
+#define I2C_IT_ADDRI                    I2C_CR1_ADDRIE
+#define I2C_IT_RXI                      I2C_CR1_RXIE
+#define I2C_IT_TXI                      I2C_CR1_TXIE
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+  * @{
+  */
+#define I2C_FLAG_TXE                    I2C_ISR_TXE
+#define I2C_FLAG_TXIS                   I2C_ISR_TXIS
+#define I2C_FLAG_RXNE                   I2C_ISR_RXNE
+#define I2C_FLAG_ADDR                   I2C_ISR_ADDR
+#define I2C_FLAG_AF                     I2C_ISR_NACKF
+#define I2C_FLAG_STOPF                  I2C_ISR_STOPF
+#define I2C_FLAG_TC                     I2C_ISR_TC
+#define I2C_FLAG_TCR                    I2C_ISR_TCR
+#define I2C_FLAG_BERR                   I2C_ISR_BERR
+#define I2C_FLAG_ARLO                   I2C_ISR_ARLO
+#define I2C_FLAG_OVR                    I2C_ISR_OVR
+#define I2C_FLAG_PECERR                 I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT                I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT                  I2C_ISR_ALERT
+#define I2C_FLAG_BUSY                   I2C_ISR_BUSY
+#define I2C_FLAG_DIR                    I2C_ISR_DIR
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2C handle state.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                do{                                                   \
+                                                                    (__HANDLE__)->State = HAL_I2C_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__)                ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+#endif
+
+/** @brief  Enable the specified I2C interrupt.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief  Disable the specified I2C interrupt.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the interrupt source to disable.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief  Check whether the specified I2C interrupt source is enabled or not.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __INTERRUPT__ specifies the I2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref I2C_IT_ERRI  Errors interrupt enable
+  *            @arg @ref I2C_IT_TCI   Transfer complete interrupt enable
+  *            @arg @ref I2C_IT_STOPI STOP detection interrupt enable
+  *            @arg @ref I2C_IT_NACKI NACK received interrupt enable
+  *            @arg @ref I2C_IT_ADDRI Address match interrupt enable
+  *            @arg @ref I2C_IT_RXI   RX interrupt enable
+  *            @arg @ref I2C_IT_TXI   TX interrupt enable
+  *
+  * @retval The new state of __INTERRUPT__ (SET or RESET).
+  */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)      ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified I2C flag is set or not.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty
+  *            @arg @ref I2C_FLAG_TXIS    Transmit interrupt status
+  *            @arg @ref I2C_FLAG_RXNE    Receive data register not empty
+  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)
+  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag
+  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag
+  *            @arg @ref I2C_FLAG_TC      Transfer complete (master mode)
+  *            @arg @ref I2C_FLAG_TCR     Transfer complete reload
+  *            @arg @ref I2C_FLAG_BERR    Bus error
+  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost
+  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun
+  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception
+  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+  *            @arg @ref I2C_FLAG_ALERT   SMBus alert
+  *            @arg @ref I2C_FLAG_BUSY    Bus busy
+  *            @arg @ref I2C_FLAG_DIR     Transfer direction (slave mode)
+  *
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define I2C_FLAG_MASK  (0x0001FFFFU)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/** @brief  Clear the I2C pending flags which are cleared by writing 1 in a specific bit.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref I2C_FLAG_TXE     Transmit data register empty
+  *            @arg @ref I2C_FLAG_ADDR    Address matched (slave mode)
+  *            @arg @ref I2C_FLAG_AF      Acknowledge failure received flag
+  *            @arg @ref I2C_FLAG_STOPF   STOP detection flag
+  *            @arg @ref I2C_FLAG_BERR    Bus error
+  *            @arg @ref I2C_FLAG_ARLO    Arbitration lost
+  *            @arg @ref I2C_FLAG_OVR     Overrun/Underrun
+  *            @arg @ref I2C_FLAG_PECERR  PEC error in reception
+  *            @arg @ref I2C_FLAG_TIMEOUT Timeout or Tlow detection flag
+  *            @arg @ref I2C_FLAG_ALERT   SMBus alert
+  *
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__FLAG__) == I2C_FLAG_TXE) ? ((__HANDLE__)->Instance->ISR |= (__FLAG__)) \
+                                                                                 : ((__HANDLE__)->Instance->ICR = (__FLAG__)))
+
+/** @brief  Enable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE(__HANDLE__)                            (SET_BIT((__HANDLE__)->Instance->CR1,  I2C_CR1_PE))
+
+/** @brief  Disable the specified I2C peripheral.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE(__HANDLE__)                           (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/** @brief  Generate a Non-Acknowledge I2C peripheral in Slave mode.
+  * @param  __HANDLE__ specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_GENERATE_NACK(__HANDLE__)                     (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
+/**
+  * @}
+  */
+
+/* Include I2C HAL Extended module */
+#include "stm32h7xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID, pI2C_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c);
+#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* IO operation functions  ****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
+  * @{
+  */
+/* Peripheral State, Mode and Error functions  *********************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+HAL_I2C_ModeTypeDef  HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c);
+uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+  * @{
+  */
+
+#define IS_I2C_ADDRESSING_MODE(MODE)    (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+                                         ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS)    (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+                                         ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK)  (((MASK) == I2C_OA2_NOMASK)  || \
+                                         ((MASK) == I2C_OA2_MASK01) || \
+                                         ((MASK) == I2C_OA2_MASK02) || \
+                                         ((MASK) == I2C_OA2_MASK03) || \
+                                         ((MASK) == I2C_OA2_MASK04) || \
+                                         ((MASK) == I2C_OA2_MASK05) || \
+                                         ((MASK) == I2C_OA2_MASK06) || \
+                                         ((MASK) == I2C_OA2_MASK07))
+
+#define IS_I2C_GENERAL_CALL(CALL)       (((CALL) == I2C_GENERALCALL_DISABLE) || \
+                                         ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH)      (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+                                         ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE)        (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+                                         ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE)          (((MODE) == I2C_RELOAD_MODE)   || \
+                                         ((MODE) == I2C_AUTOEND_MODE) || \
+                                         ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST)    (((REQUEST) == I2C_GENERATE_STOP)        || \
+                                         ((REQUEST) == I2C_GENERATE_START_READ)  || \
+                                         ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+                                         ((REQUEST) == I2C_NO_STARTSTOP))
+
+#define IS_I2C_TRANSFER_OPTIONS_REQUEST(REQUEST)  (((REQUEST) == I2C_FIRST_FRAME)          || \
+                                                   ((REQUEST) == I2C_FIRST_AND_NEXT_FRAME) || \
+                                                   ((REQUEST) == I2C_NEXT_FRAME)           || \
+                                                   ((REQUEST) == I2C_FIRST_AND_LAST_FRAME) || \
+                                                   ((REQUEST) == I2C_LAST_FRAME)           || \
+                                                   ((REQUEST) == I2C_LAST_FRAME_NO_STOP)   || \
+                                                   IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST))
+
+#define IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == I2C_OTHER_FRAME)     || \
+                                                        ((REQUEST) == I2C_OTHER_AND_LAST_FRAME))
+
+#define I2C_RESET_CR2(__HANDLE__)                 ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define I2C_GET_ADDR_MATCH(__HANDLE__)            ((uint16_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 16U))
+#define I2C_GET_DIR(__HANDLE__)                   ((uint8_t)(((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U))
+#define I2C_GET_STOP_MODE(__HANDLE__)             ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define I2C_GET_OWN_ADDRESS1(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR1 & I2C_OAR1_OA1))
+#define I2C_GET_OWN_ADDRESS2(__HANDLE__)          ((uint16_t)((__HANDLE__)->Instance->OAR2 & I2C_OAR2_OA2))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1)             ((ADDRESS1) <= 0x000003FFU)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2)             ((ADDRESS2) <= (uint16_t)0x00FFU)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__)              ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00U))) >> 8U)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__)              ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FFU))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+                                                          (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define I2C_CHECK_FLAG(__ISR__, __FLAG__)         ((((__ISR__) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)) ? SET : RESET)
+#define I2C_CHECK_IT_SOURCE(__CR1__, __IT__)      ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
+/**
+  * @}
+  */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32h7xx_hal_i2c.c file */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h

@@ -0,0 +1,187 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_i2c_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2C HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_I2C_EX_H
+#define STM32H7xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2CEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+  * @{
+  */
+#define I2C_ANALOGFILTER_ENABLE         0x00000000U
+#define I2C_ANALOGFILTER_DISABLE        I2C_CR1_ANFOFF
+/**
+  * @}
+  */
+
+/** @defgroup I2CEx_FastModePlus I2C Extended Fast Mode Plus
+  * @{
+  */
+#define I2C_FMP_NOT_SUPPORTED           0xAAAA0000U                                     /*!< Fast Mode Plus not supported       */
+#define I2C_FASTMODEPLUS_PB6            SYSCFG_PMCR_I2C_PB6_FMP                        /*!< Enable Fast Mode Plus on PB6       */
+#define I2C_FASTMODEPLUS_PB7            SYSCFG_PMCR_I2C_PB7_FMP                        /*!< Enable Fast Mode Plus on PB7       */
+#define I2C_FASTMODEPLUS_PB8            SYSCFG_PMCR_I2C_PB8_FMP                        /*!< Enable Fast Mode Plus on PB8       */
+#define I2C_FASTMODEPLUS_PB9            SYSCFG_PMCR_I2C_PB9_FMP                        /*!< Enable Fast Mode Plus on PB9       */
+#define I2C_FASTMODEPLUS_I2C1           SYSCFG_PMCR_I2C1_FMP                           /*!< Enable Fast Mode Plus on I2C1 pins */
+#define I2C_FASTMODEPLUS_I2C2           SYSCFG_PMCR_I2C2_FMP                           /*!< Enable Fast Mode Plus on I2C2 pins */
+#define I2C_FASTMODEPLUS_I2C3           SYSCFG_PMCR_I2C3_FMP                           /*!< Enable Fast Mode Plus on I2C3 pins */
+#define I2C_FASTMODEPLUS_I2C4           SYSCFG_PMCR_I2C4_FMP                           /*!< Enable Fast Mode Plus on I2C4 pins */
+#if defined(SYSCFG_PMCR_I2C5_FMP)
+#define I2C_FASTMODEPLUS_I2C5           SYSCFG_PMCR_I2C5_FMP                           /*!< Enable Fast Mode Plus on I2C5 pins */
+#else
+#define I2C_FASTMODEPLUS_I2C5           (uint32_t)(0x00001000U | I2C_FMP_NOT_SUPPORTED) /*!< Fast Mode Plus I2C5 not supported  */
+#endif
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+  * @brief    Extended features functions
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c);
+void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Extended Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macro I2C Extended Private Macros
+  * @{
+  */
+#define IS_I2C_ANALOG_FILTER(FILTER)    (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+                                          ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000FU)
+
+#if (defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP) && defined(SYSCFG_PMCR_I2C3_FMP) && defined(SYSCFG_PMCR_I2C4_FMP))
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6)  == I2C_FASTMODEPLUS_PB6)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB7)  == I2C_FASTMODEPLUS_PB7)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB8)  == I2C_FASTMODEPLUS_PB8)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB9)  == I2C_FASTMODEPLUS_PB9)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C4) == I2C_FASTMODEPLUS_I2C4))
+#elif defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP) && defined(SYSCFG_PMCR_I2C3_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6)  == I2C_FASTMODEPLUS_PB6)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB7)  == I2C_FASTMODEPLUS_PB7)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB8)  == I2C_FASTMODEPLUS_PB8)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB9)  == I2C_FASTMODEPLUS_PB9)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C3) == I2C_FASTMODEPLUS_I2C3))
+#elif defined(SYSCFG_PMCR_I2C1_FMP) && defined(SYSCFG_PMCR_I2C2_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6)  == I2C_FASTMODEPLUS_PB6)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB7)  == I2C_FASTMODEPLUS_PB7)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB8)  == I2C_FASTMODEPLUS_PB8)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB9)  == I2C_FASTMODEPLUS_PB9)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1) || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C2) == I2C_FASTMODEPLUS_I2C2))
+#elif defined(SYSCFG_PMCR_I2C1_FMP)
+#define IS_I2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & I2C_FASTMODEPLUS_PB6)  == I2C_FASTMODEPLUS_PB6)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB7)  == I2C_FASTMODEPLUS_PB7)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB8)  == I2C_FASTMODEPLUS_PB8)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_PB9)  == I2C_FASTMODEPLUS_PB9)  || \
+                                         (((__CONFIG__) & I2C_FASTMODEPLUS_I2C1) == I2C_FASTMODEPLUS_I2C1))
+#endif /* SYSCFG_PMCR_I2C1_FMP && SYSCFG_PMCR_I2C2_FMP && SYSCFG_PMCR_I2C3_FMP && SYSCFG_PMCR_I2C4_FMP */
+
+
+
+/**
+  * @}
+  */
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Functions I2C Extended Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32h7xx_hal_i2c_ex.c file */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_I2C_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2s.h

@@ -0,0 +1,651 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_i2s.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_I2S_H
+#define STM32H7xx_HAL_I2S_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2S
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+  * @{
+  */
+
+/**
+  * @brief I2S Init structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;                /*!< Specifies the I2S operating mode.
+                                     This parameter can be a value of @ref I2S_Mode */
+
+  uint32_t Standard;            /*!< Specifies the standard used for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Standard */
+
+  uint32_t DataFormat;          /*!< Specifies the data format for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Data_Format */
+
+  uint32_t MCLKOutput;          /*!< Specifies whether the I2S MCLK output is enabled or not.
+                                     This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t AudioFreq;           /*!< Specifies the frequency selected for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint32_t CPOL;                /*!< Specifies the idle state of the I2S clock.
+                                     This parameter can be a value of @ref I2S_Clock_Polarity */
+
+  uint32_t FirstBit;            /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                     This parameter can be a value of @ref I2S_MSB_LSB_Transmission       */
+
+  uint32_t WSInversion;         /*!< Control the Word Select Inversion.
+                                     This parameter can be a value of @ref I2S_WSInversion                */
+
+  uint32_t Data24BitAlignment;  /*!< Specifies the Data Padding for 24 bits data length
+                                      This parameter can be a value of @ref I2S_Data_24Bit_Alignment       */
+
+  uint32_t MasterKeepIOState;   /*!< Control of Alternate function GPIOs state
+                                     This parameter can be a value of @ref I2S_Master_Keep_IO_State */
+
+} I2S_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_I2S_STATE_RESET      = 0x00UL,  /*!< I2S not yet initialized or disabled                */
+  HAL_I2S_STATE_READY      = 0x01UL,  /*!< I2S initialized and ready for use                  */
+  HAL_I2S_STATE_BUSY       = 0x02UL,  /*!< I2S internal process is ongoing                    */
+  HAL_I2S_STATE_BUSY_TX    = 0x03UL,  /*!< Data Transmission process is ongoing               */
+  HAL_I2S_STATE_BUSY_RX    = 0x04UL,  /*!< Data Reception process is ongoing                  */
+  HAL_I2S_STATE_BUSY_TX_RX = 0x05UL,  /*!< Data Transmission and Reception process is ongoing */
+  HAL_I2S_STATE_TIMEOUT    = 0x06UL,  /*!< I2S timeout state                                  */
+  HAL_I2S_STATE_ERROR      = 0x07UL   /*!< I2S error state                                    */
+} HAL_I2S_StateTypeDef;
+
+/**
+  * @brief I2S handle Structure definition
+  */
+typedef struct __I2S_HandleTypeDef
+{
+  SPI_TypeDef                *Instance;            /*!< I2S registers base address */
+
+  I2S_InitTypeDef            Init;                 /*!< I2S communication parameters */
+
+  uint16_t                   *pTxBuffPtr;          /*!< Pointer to I2S Tx transfer buffer */
+
+  __IO uint16_t              TxXferSize;           /*!< I2S Tx transfer size */
+
+  __IO uint16_t              TxXferCount;          /*!< I2S Tx transfer Counter */
+
+  uint16_t                   *pRxBuffPtr;          /*!< Pointer to I2S Rx transfer buffer */
+
+  __IO uint16_t              RxXferSize;           /*!< I2S Rx transfer size */
+
+  __IO uint16_t              RxXferCount;          /*!< I2S Rx transfer counter
+                                                      (This field is initialized at the
+                                                       same value as transfer size at the
+                                                       beginning of the transfer and
+                                                       decremented when a sample is received
+                                                       NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+  void (*RxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Rx ISR */
+
+  void (*TxISR)(struct __I2S_HandleTypeDef *hi2s); /*!< function pointer on Tx ISR */
+  
+  DMA_HandleTypeDef          *hdmatx;              /*!< I2S Tx DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmarx;              /*!< I2S Rx DMA handle parameters */
+
+  __IO HAL_LockTypeDef       Lock;                 /*!< I2S locking object */
+
+  __IO HAL_I2S_StateTypeDef  State;                /*!< I2S communication state */
+
+  __IO uint32_t              ErrorCode;            /*!< I2S Error code
+                                                        This parameter can be a value of @ref I2S_Error */
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s);             /*!< I2S Tx Completed callback          */
+  void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s);             /*!< I2S Rx Completed callback          */
+  void (* TxRxCpltCallback)(struct __I2S_HandleTypeDef *hi2s);           /*!< I2S TxRx Completed callback        */
+  void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s);         /*!< I2S Tx Half Completed callback     */
+  void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s);         /*!< I2S Rx Half Completed callback     */
+  void (* TxRxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s);       /*!< I2S TxRx Half Completed callback   */
+  void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s);              /*!< I2S Error callback                 */
+  void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s);            /*!< I2S Msp Init callback              */
+  void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s);          /*!< I2S Msp DeInit callback            */
+
+#endif  /* USE_HAL_I2S_REGISTER_CALLBACKS */
+} I2S_HandleTypeDef;
+
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+/**
+
+  * @brief  HAL I2S Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_I2S_TX_COMPLETE_CB_ID             = 0x00UL,    /*!< I2S Tx Completed callback ID         */
+  HAL_I2S_RX_COMPLETE_CB_ID             = 0x01UL,    /*!< I2S Rx Completed callback ID         */
+  HAL_I2S_TX_RX_COMPLETE_CB_ID          = 0x02UL,    /*!< I2S TxRx Completed callback ID       */
+  HAL_I2S_TX_HALF_COMPLETE_CB_ID        = 0x03UL,    /*!< I2S Tx Half Completed callback ID    */
+  HAL_I2S_RX_HALF_COMPLETE_CB_ID        = 0x04UL,    /*!< I2S Rx Half Completed callback ID    */
+  HAL_I2S_TX_RX_HALF_COMPLETE_CB_ID     = 0x05UL,    /*!< I2S TxRx Half Completed callback ID  */
+  HAL_I2S_ERROR_CB_ID                   = 0x06UL,    /*!< I2S Error callback ID                */
+  HAL_I2S_MSPINIT_CB_ID                 = 0x07UL,    /*!< I2S Msp Init callback ID             */
+  HAL_I2S_MSPDEINIT_CB_ID               = 0x08UL     /*!< I2S Msp DeInit callback ID           */
+
+} HAL_I2S_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL I2S Callback pointer definition
+  */
+typedef  void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */
+
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+  * @{
+  */
+/** @defgroup I2S_Error I2S Error
+  * @{
+  */
+#define HAL_I2S_ERROR_NONE               (0x00000000UL)  /*!< No error                          */
+#define HAL_I2S_ERROR_TIMEOUT            (0x00000001UL)  /*!< Timeout error                     */
+#define HAL_I2S_ERROR_OVR                (0x00000002UL)  /*!< OVR error                         */
+#define HAL_I2S_ERROR_UDR                (0x00000004UL)  /*!< UDR error                         */
+#define HAL_I2S_ERROR_DMA                (0x00000008UL)  /*!< DMA transfer error                */
+#define HAL_I2S_ERROR_PRESCALER          (0x00000010UL)  /*!< Prescaler Calculation error       */
+#define HAL_I2S_ERROR_FRE                (0x00000020UL)  /*!< FRE error                         */
+#define HAL_I2S_ERROR_NO_OGT             (0x00000040UL)  /*!< No On Going Transfer error        */
+#define HAL_I2S_ERROR_NOT_SUPPORTED      (0x00000080UL)  /*!< Requested operation not supported */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+#define HAL_I2S_ERROR_INVALID_CALLBACK   (0x00000100UL)  /*!< Invalid Callback error      */
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Mode I2S Mode
+  * @{
+  */
+#define I2S_MODE_SLAVE_TX                (0x00000000UL)
+#define I2S_MODE_SLAVE_RX                (SPI_I2SCFGR_I2SCFG_0)
+#define I2S_MODE_MASTER_TX               (SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_MASTER_RX               (SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)
+#define I2S_MODE_SLAVE_FULLDUPLEX        (SPI_I2SCFGR_I2SCFG_2)
+#define I2S_MODE_MASTER_FULLDUPLEX       (SPI_I2SCFGR_I2SCFG_2 | SPI_I2SCFGR_I2SCFG_0)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Standard I2S Standard
+  * @{
+  */
+#define I2S_STANDARD_PHILIPS             (0x00000000UL)
+#define I2S_STANDARD_MSB                 (SPI_I2SCFGR_I2SSTD_0)
+#define I2S_STANDARD_LSB                 (SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_SHORT           (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)
+#define I2S_STANDARD_PCM_LONG            (SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+  * @{
+  */
+#define I2S_DATAFORMAT_16B               (0x00000000UL)
+#define I2S_DATAFORMAT_16B_EXTENDED      (SPI_I2SCFGR_CHLEN)
+#define I2S_DATAFORMAT_24B               (SPI_I2SCFGR_DATLEN_0)
+#define I2S_DATAFORMAT_32B               (SPI_I2SCFGR_DATLEN_1)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+  * @{
+  */
+#define I2S_MCLKOUTPUT_ENABLE            (SPI_I2SCFGR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE           (0x00000000UL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+  * @{
+  */
+#define I2S_AUDIOFREQ_192K               (192000UL)
+#define I2S_AUDIOFREQ_96K                (96000UL)
+#define I2S_AUDIOFREQ_48K                (48000UL)
+#define I2S_AUDIOFREQ_44K                (44100UL)
+#define I2S_AUDIOFREQ_32K                (32000UL)
+#define I2S_AUDIOFREQ_22K                (22050UL)
+#define I2S_AUDIOFREQ_16K                (16000UL)
+#define I2S_AUDIOFREQ_11K                (11025UL)
+#define I2S_AUDIOFREQ_8K                 (8000UL)
+#define I2S_AUDIOFREQ_DEFAULT            (2UL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Clock_Polarity I2S FullDuplex Mode
+  * @{
+  */
+#define I2S_CPOL_LOW                     (0x00000000UL)
+#define I2S_CPOL_HIGH                    (SPI_I2SCFGR_CKPOL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MSB_LSB_Transmission I2S MSB LSB Transmission
+  * @{
+  */
+#define I2S_FIRSTBIT_MSB                 (0x00000000UL)
+#define I2S_FIRSTBIT_LSB                 SPI_CFG2_LSBFRST
+/**
+  * @}
+  */
+
+/** @defgroup I2S_WSInversion I2S Word Select Inversion
+  * @{
+  */
+#define I2S_WS_INVERSION_DISABLE         (0x00000000UL)
+#define I2S_WS_INVERSION_ENABLE          SPI_I2SCFGR_WSINV
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Data_24Bit_Alignment Data Padding 24Bit
+  * @{
+  */
+#define I2S_DATA_24BIT_ALIGNMENT_RIGHT   (0x00000000UL)
+#define I2S_DATA_24BIT_ALIGNMENT_LEFT    SPI_I2SCFGR_DATFMT
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Master_Keep_IO_State Keep IO State
+  * @{
+  */
+#define I2S_MASTER_KEEP_IO_STATE_DISABLE (0x00000000U)
+#define I2S_MASTER_KEEP_IO_STATE_ENABLE  SPI_CFG2_AFCNTR
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+  * @{
+  */
+#define I2S_IT_RXP                       SPI_IER_RXPIE
+#define I2S_IT_TXP                       SPI_IER_TXPIE
+#define I2S_IT_DXP                       SPI_IER_DXPIE
+#define I2S_IT_UDR                       SPI_IER_UDRIE
+#define I2S_IT_OVR                       SPI_IER_OVRIE
+#define I2S_IT_FRE                       SPI_IER_TIFREIE
+#define I2S_IT_ERR                       (SPI_IER_UDRIE | SPI_IER_OVRIE | SPI_IER_TIFREIE)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+  * @{
+  */
+#define I2S_FLAG_RXP                     SPI_SR_RXP       /* I2S status flag : Rx-Packet available flag                 */
+#define I2S_FLAG_TXP                     SPI_SR_TXP       /* I2S status flag : Tx-Packet space available flag           */
+#define I2S_FLAG_DXP                     SPI_SR_DXP       /* I2S status flag : Dx-Packet space available flag           */
+#define I2S_FLAG_UDR                     SPI_SR_UDR       /* I2S Error flag  : Underrun flag                            */
+#define I2S_FLAG_OVR                     SPI_SR_OVR       /* I2S Error flag  : Overrun flag                             */
+#define I2S_FLAG_FRE                     SPI_SR_TIFRE     /* I2S Error flag  : TI mode frame format error flag          */
+
+#define I2S_FLAG_MASK                    (SPI_SR_RXP | SPI_SR_TXP | SPI_SR_DXP |SPI_SR_UDR | SPI_SR_OVR | SPI_SR_TIFRE)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+  * @{
+  */
+
+/** @brief  Reset I2S handle state
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__)                do{                                                  \
+                                                                    (__HANDLE__)->State = HAL_I2S_STATE_RESET;       \
+                                                                    (__HANDLE__)->MspInitCallback = NULL;            \
+                                                                    (__HANDLE__)->MspDeInitCallback = NULL;          \
+                                                                  } while(0)
+#else
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+#endif
+
+/** @brief  Enable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE(__HANDLE__)    (SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
+
+/** @brief  Disable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE))
+
+/** @brief  Enable the specified I2S interrupts.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  *        This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_RXP : Rx-Packet available interrupt
+  *            @arg I2S_IT_TXP : Tx-Packet space available interrupt
+  *            @arg I2S_IT_UDR : Underrun interrupt
+  *            @arg I2S_IT_OVR : Overrun interrupt
+  *            @arg I2S_IT_FRE : TI mode frame format error interrupt
+  *            @arg I2S_IT_ERR : Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief  Disable the specified I2S interrupts.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__ specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_RXP : Rx-Packet available interrupt
+  *            @arg I2S_IT_TXP : Tx-Packet space available interrupt
+  *            @arg I2S_IT_UDR : Underrun interrupt
+  *            @arg I2S_IT_OVR : Overrun interrupt
+  *            @arg I2S_IT_FRE : TI mode frame format error interrupt
+  *            @arg I2S_IT_ERR : Error interrupt enable
+  * @retval None
+  */
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief  Check if the specified I2S interrupt source is enabled or disabled.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__ specifies the I2S interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2S_IT_RXP : Rx-Packet available interrupt
+  *            @arg I2S_IT_TXP : Tx-Packet space available interrupt
+  *            @arg I2S_IT_DXP : Tx-Packet space available interrupt
+  *            @arg I2S_IT_UDR : Underrun interrupt
+  *            @arg I2S_IT_OVR : Overrun interrupt
+  *            @arg I2S_IT_FRE : TI mode frame format error interrupt
+  *            @arg I2S_IT_ERR : Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified I2S flag is set or not.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2 or 3 to select the I2S peripheral.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXP : Rx-Packet available flag
+  *            @arg I2S_FLAG_TXP : Tx-Packet space available flag
+  *            @arg I2S_FLAG_UDR : Underrun flag
+  *            @arg I2S_FLAG_OVR : Overrun flag
+  *            @arg I2S_FLAG_FRE : TI mode frame format error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the I2S OVR pending flag.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_OVRC)
+
+/** @brief Clear the I2S UDR pending flag.
+  * @param  __HANDLE__ specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_UDRC)
+
+/** @brief  Clear the I2S FRE pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_TIFREFLAG(__HANDLE__) SET_BIT((__HANDLE__)->Instance->IFCR , SPI_IFCR_TIFREC)
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_I2S_REGISTER_CALLBACKS == 1UL)
+HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, pI2S_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_I2S_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData,
+                                            uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData,
+                                               uint16_t Size);
+
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData,
+                                               uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2SEx_TxRxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2SEx_TxRxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+  * @{
+  */
+
+/** @brief  Check whether the specified SPI flag is set or not.
+  * @param  __SR__  copy of I2S SR register.
+  * @param  __FLAG__ specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXP : Rx-Packet available flag
+  *            @arg I2S_FLAG_TXP : Tx-Packet space available flag
+  *            @arg I2S_FLAG_UDR : Underrun flag
+  *            @arg I2S_FLAG_OVR : Overrun flag
+  *            @arg I2S_FLAG_FRE : TI mode frame format error flag
+  * @retval SET or RESET.
+  */
+#define I2S_CHECK_FLAG(__SR__, __FLAG__)         ((((__SR__) & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET)
+
+/** @brief  Check whether the specified SPI Interrupt is set or not.
+  * @param  __IER__  copy of I2S IER register.
+  * @param  __INTERRUPT__ specifies the SPI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg I2S_IT_RXP : Rx-Packet available interrupt
+  *            @arg I2S_IT_TXP : Tx-Packet space available interrupt
+  *            @arg I2S_IT_UDR : Underrun interrupt
+  *            @arg I2S_IT_OVR : Overrun interrupt
+  *            @arg I2S_IT_FRE : TI mode frame format error interrupt
+  *            @arg I2S_IT_ERR : Error interrupt enable
+  * @retval SET or RESET.
+  */
+#define I2S_CHECK_IT_SOURCE(__IER__, __INTERRUPT__)      ((((__IER__) & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks if I2S Mode parameter is in allowed range.
+  * @param  __MODE__ specifies the I2S Mode.
+  *         This parameter can be a value of @ref I2S_Mode
+  * @retval None
+  */
+#define IS_I2S_MODE(__MODE__)                       (((__MODE__) == I2S_MODE_SLAVE_TX)                   || \
+                                                     ((__MODE__) == I2S_MODE_SLAVE_RX)                   || \
+                                                     ((__MODE__) == I2S_MODE_MASTER_TX)                  || \
+                                                     ((__MODE__) == I2S_MODE_MASTER_RX)                  || \
+                                                     ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX)           || \
+                                                     ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
+
+#define IS_I2S_MASTER(__MODE__)                     (((__MODE__) == I2S_MODE_MASTER_TX)                  || \
+                                                     ((__MODE__) == I2S_MODE_MASTER_RX)                  || \
+                                                     ((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX))
+
+#define IS_I2S_SLAVE(__MODE__)                      (((__MODE__) == I2S_MODE_SLAVE_TX)                  || \
+                                                     ((__MODE__) == I2S_MODE_SLAVE_RX)                  || \
+                                                     ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX))
+                                                     
+#define IS_I2S_FULLDUPLEX(__MODE__)                 (((__MODE__) == I2S_MODE_MASTER_FULLDUPLEX)         || \
+                                                     ((__MODE__) == I2S_MODE_SLAVE_FULLDUPLEX))                                                  
+
+#define IS_I2S_STANDARD(__STANDARD__)               (((__STANDARD__) == I2S_STANDARD_PHILIPS)            || \
+                                                     ((__STANDARD__) == I2S_STANDARD_MSB)                || \
+                                                     ((__STANDARD__) == I2S_STANDARD_LSB)                || \
+                                                     ((__STANDARD__) == I2S_STANDARD_PCM_SHORT)          || \
+                                                     ((__STANDARD__) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(__FORMAT__)              (((__FORMAT__) == I2S_DATAFORMAT_16B)                || \
+                                                     ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED)       || \
+                                                     ((__FORMAT__) == I2S_DATAFORMAT_24B)                || \
+                                                     ((__FORMAT__) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(__OUTPUT__)              (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE)             || \
+                                                     ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(__FREQ__)                ((((__FREQ__) >= I2S_AUDIOFREQ_8K)                    && \
+                                                     ((__FREQ__) <= I2S_AUDIOFREQ_192K))                 || \
+                                                     ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_CPOL(__CPOL__)                       (((__CPOL__) == I2S_CPOL_LOW)                        || \
+                                                     ((__CPOL__) == I2S_CPOL_HIGH))
+
+#define IS_I2S_FIRST_BIT(__BIT__)                   (((__BIT__) == I2S_FIRSTBIT_MSB)                     || \
+                                                     ((__BIT__) == I2S_FIRSTBIT_LSB))
+
+#define IS_I2S_WS_INVERSION(__WSINV__)              (((__WSINV__) == I2S_WS_INVERSION_DISABLE)           || \
+                                                     ((__WSINV__) == I2S_WS_INVERSION_ENABLE))
+
+#define IS_I2S_DATA_24BIT_ALIGNMENT(__ALIGNMENT__)  (((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_RIGHT) || \
+                                                     ((__ALIGNMENT__) == I2S_DATA_24BIT_ALIGNMENT_LEFT))
+
+#define IS_I2S_MASTER_KEEP_IO_STATE(__AFCNTR__)     (((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_DISABLE)  || \
+                                                     ((__AFCNTR__) == I2S_MASTER_KEEP_IO_STATE_ENABLE))
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2s_ex.h

@@ -0,0 +1,28 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_i2s_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+  
+/**
+  ******************************************************************************
+                      ===== I2S FULL DUPLEX FEATURE =====
+       I2S Full Duplex APIs are available in stm32h7xx_hal_i2s.c/.h
+  ******************************************************************************
+  */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_irda.h

@@ -0,0 +1,884 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_irda.h
+  * @author  MCD Application Team
+  * @brief   Header file of IRDA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_IRDA_H
+#define STM32H7xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IRDA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+  * @{
+  */
+
+/**
+  * @brief IRDA Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the IRDA communication baud rate.
+                                           The baud rate register is computed using the following formula:
+                                              Baud Rate Register = ((usart_ker_ckpres) / ((hirda->Init.BaudRate)))
+                                           where usart_ker_ckpres is the IRDA input clock divided by a prescaler */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref IRDAEx_Word_Length */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref IRDA_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref IRDA_Transfer_Mode */
+
+  uint8_t  Prescaler;                 /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+                                           to achieve low-power frequency.
+                                           @note Prescaler value 0 is forbidden */
+
+  uint16_t PowerMode;                 /*!< Specifies the IRDA power mode.
+                                           This parameter can be a value of @ref IRDA_Low_Power */
+
+  uint32_t ClockPrescaler;            /*!< Specifies the prescaler value used to divide the IRDA clock source.
+                                           This parameter can be a value of @ref IRDA_ClockPrescaler. */
+
+} IRDA_InitTypeDef;
+
+/**
+  * @brief HAL IRDA State definition
+  * @note  HAL IRDA State value is a combination of 2 different substates: gState and RxState (see @ref IRDA_State_Definition).
+  *        - gState contains IRDA state information related to global Handle management
+  *          and also information related to Tx operations.
+  *          gState value coding follow below described bitmap :
+  *          b7-b6  Error information
+  *             00 : No Error
+  *             01 : (Not Used)
+  *             10 : Timeout
+  *             11 : Error
+  *          b5     Peripheral initialization status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral not initialized. HAL IRDA Init function already called)
+  *          b4-b3  (not used)
+  *             xx : Should be set to 00
+  *          b2     Intrinsic process state
+  *             0  : Ready
+  *             1  : Busy (Peripheral busy with some configuration or internal operations)
+  *          b1     (not used)
+  *             x  : Should be set to 0
+  *          b0     Tx state
+  *             0  : Ready (no Tx operation ongoing)
+  *             1  : Busy (Tx operation ongoing)
+  *        - RxState contains information related to Rx operations.
+  *          RxState value coding follow below described bitmap :
+  *          b7-b6  (not used)
+  *             xx : Should be set to 00
+  *          b5     Peripheral initialization status
+  *             0  : Reset (Peripheral not initialized)
+  *             1  : Init done (Peripheral not initialized)
+  *          b4-b2  (not used)
+  *            xxx : Should be set to 000
+  *          b1     Rx state
+  *             0  : Ready (no Rx operation ongoing)
+  *             1  : Busy (Rx operation ongoing)
+  *          b0     (not used)
+  *             x  : Should be set to 0.
+  */
+typedef uint32_t HAL_IRDA_StateTypeDef;
+
+/**
+  * @brief IRDA clock sources definition
+  */
+typedef enum
+{
+  IRDA_CLOCKSOURCE_D2PCLK1    = 0x11U,    /*!< Domain2 PCLK1 clock source */
+  IRDA_CLOCKSOURCE_D2PCLK2    = 0x12U,    /*!< Domain2 PCLK2 clock source */
+  IRDA_CLOCKSOURCE_PLL2Q      = 0x14U,    /*!< PLL2Q clock source         */
+  IRDA_CLOCKSOURCE_PLL3Q      = 0x18U,    /*!< PCLK2 clock source         */
+  IRDA_CLOCKSOURCE_HSI        = 0x02U,    /*!< HSI clock source           */
+  IRDA_CLOCKSOURCE_CSI        = 0x08U,    /*!< CSI clock source           */
+  IRDA_CLOCKSOURCE_LSE        = 0x10U,    /*!< LSE clock source           */
+  IRDA_CLOCKSOURCE_UNDEFINED  = 0x20U     /*!< Undefined clock source     */
+} IRDA_ClockSourceTypeDef;
+
+/**
+  * @brief  IRDA handle Structure definition
+  */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+typedef struct __IRDA_HandleTypeDef
+#else
+typedef struct
+#endif  /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+{
+  USART_TypeDef            *Instance;        /*!< USART registers base address       */
+
+  IRDA_InitTypeDef         Init;             /*!< IRDA communication parameters      */
+
+  uint8_t                  *pTxBuffPtr;      /*!< Pointer to IRDA Tx transfer Buffer */
+
+  uint16_t                 TxXferSize;       /*!< IRDA Tx Transfer size              */
+
+  __IO uint16_t            TxXferCount;      /*!< IRDA Tx Transfer Counter           */
+
+  uint8_t                  *pRxBuffPtr;      /*!< Pointer to IRDA Rx transfer Buffer */
+
+  uint16_t                 RxXferSize;       /*!< IRDA Rx Transfer size              */
+
+  __IO uint16_t            RxXferCount;      /*!< IRDA Rx Transfer Counter           */
+
+  uint16_t                 Mask;             /*!< USART RX RDR register mask         */
+
+  DMA_HandleTypeDef        *hdmatx;          /*!< IRDA Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef        *hdmarx;          /*!< IRDA Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef          Lock;             /*!< Locking object                     */
+
+  __IO HAL_IRDA_StateTypeDef    gState;      /*!< IRDA state information related to global Handle management
+                                                  and also related to Tx operations.
+                                                  This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+  __IO HAL_IRDA_StateTypeDef    RxState;     /*!< IRDA state information related to Rx operations.
+                                                  This parameter can be a value of @ref HAL_IRDA_StateTypeDef */
+
+  __IO uint32_t            ErrorCode;        /*!< IRDA Error code                    */
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+  void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda);        /*!< IRDA Tx Half Complete Callback        */
+
+  void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda);            /*!< IRDA Tx Complete Callback             */
+
+  void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda);        /*!< IRDA Rx Half Complete Callback        */
+
+  void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda);            /*!< IRDA Rx Complete Callback             */
+
+  void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda);             /*!< IRDA Error Callback                   */
+
+  void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda);         /*!< IRDA Abort Complete Callback          */
+
+  void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */
+
+  void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda);  /*!< IRDA Abort Receive Complete Callback  */
+
+
+  void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda);           /*!< IRDA Msp Init callback                */
+
+  void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda);         /*!< IRDA Msp DeInit callback              */
+#endif  /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+} IRDA_HandleTypeDef;
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL IRDA Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_IRDA_TX_HALFCOMPLETE_CB_ID         = 0x00U,    /*!< IRDA Tx Half Complete Callback ID        */
+  HAL_IRDA_TX_COMPLETE_CB_ID             = 0x01U,    /*!< IRDA Tx Complete Callback ID             */
+  HAL_IRDA_RX_HALFCOMPLETE_CB_ID         = 0x02U,    /*!< IRDA Rx Half Complete Callback ID        */
+  HAL_IRDA_RX_COMPLETE_CB_ID             = 0x03U,    /*!< IRDA Rx Complete Callback ID             */
+  HAL_IRDA_ERROR_CB_ID                   = 0x04U,    /*!< IRDA Error Callback ID                   */
+  HAL_IRDA_ABORT_COMPLETE_CB_ID          = 0x05U,    /*!< IRDA Abort Complete Callback ID          */
+  HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U,    /*!< IRDA Abort Transmit Complete Callback ID */
+  HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID  = 0x07U,    /*!< IRDA Abort Receive Complete Callback ID  */
+
+  HAL_IRDA_MSPINIT_CB_ID                 = 0x08U,    /*!< IRDA MspInit callback ID                 */
+  HAL_IRDA_MSPDEINIT_CB_ID               = 0x09U     /*!< IRDA MspDeInit callback ID               */
+
+} HAL_IRDA_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL IRDA Callback pointer definition
+  */
+typedef  void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda);  /*!< pointer to an IRDA callback function */
+
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
+  * @{
+  */
+
+/** @defgroup IRDA_State_Definition IRDA State Code Definition
+  * @{
+  */
+#define HAL_IRDA_STATE_RESET                0x00000000U   /*!< Peripheral is not initialized
+                                                               Value is allowed for gState and RxState */
+#define HAL_IRDA_STATE_READY                0x00000020U   /*!< Peripheral Initialized and ready for use
+                                                               Value is allowed for gState and RxState */
+#define HAL_IRDA_STATE_BUSY                 0x00000024U   /*!< An internal process is ongoing
+                                                               Value is allowed for gState only */
+#define HAL_IRDA_STATE_BUSY_TX              0x00000021U   /*!< Data Transmission process is ongoing
+                                                               Value is allowed for gState only */
+#define HAL_IRDA_STATE_BUSY_RX              0x00000022U   /*!< Data Reception process is ongoing
+                                                               Value is allowed for RxState only */
+#define HAL_IRDA_STATE_BUSY_TX_RX           0x00000023U   /*!< Data Transmission and Reception process is ongoing
+                                                               Not to be used for neither gState nor RxState.
+                                                               Value is result of combination (Or) between gState and RxState values */
+#define HAL_IRDA_STATE_TIMEOUT              0x000000A0U   /*!< Timeout state
+                                                               Value is allowed for gState only */
+#define HAL_IRDA_STATE_ERROR                0x000000E0U   /*!< Error
+                                                               Value is allowed for gState only */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Error_Definition IRDA Error Code Definition
+  * @{
+  */
+#define HAL_IRDA_ERROR_NONE                 ((uint32_t)0x00000000U)          /*!< No error                */
+#define HAL_IRDA_ERROR_PE                   ((uint32_t)0x00000001U)          /*!< Parity error            */
+#define HAL_IRDA_ERROR_NE                   ((uint32_t)0x00000002U)          /*!< Noise error             */
+#define HAL_IRDA_ERROR_FE                   ((uint32_t)0x00000004U)          /*!< frame error             */
+#define HAL_IRDA_ERROR_ORE                  ((uint32_t)0x00000008U)          /*!< Overrun error           */
+#define HAL_IRDA_ERROR_DMA                  ((uint32_t)0x00000010U)          /*!< DMA transfer error      */
+#define HAL_IRDA_ERROR_BUSY                 ((uint32_t)0x00000020U)          /*!< Busy Error              */
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+#define HAL_IRDA_ERROR_INVALID_CALLBACK     ((uint32_t)0x00000040U)          /*!< Invalid Callback error  */
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Parity IRDA Parity
+  * @{
+  */
+#define IRDA_PARITY_NONE                    0x00000000U                      /*!< No parity   */
+#define IRDA_PARITY_EVEN                    USART_CR1_PCE                    /*!< Even parity */
+#define IRDA_PARITY_ODD                     (USART_CR1_PCE | USART_CR1_PS)   /*!< Odd parity  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+  * @{
+  */
+#define IRDA_MODE_RX                        USART_CR1_RE                   /*!< RX mode        */
+#define IRDA_MODE_TX                        USART_CR1_TE                   /*!< TX mode        */
+#define IRDA_MODE_TX_RX                     (USART_CR1_TE |USART_CR1_RE)   /*!< RX and TX mode */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+  * @{
+  */
+#define IRDA_POWERMODE_NORMAL               0x00000000U       /*!< IRDA normal power mode */
+#define IRDA_POWERMODE_LOWPOWER             USART_CR3_IRLP    /*!< IRDA low power mode    */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_ClockPrescaler IRDA Clock Prescaler
+  * @{
+  */
+#define IRDA_PRESCALER_DIV1    0x00000000U  /*!< fclk_pres = fclk     */
+#define IRDA_PRESCALER_DIV2    0x00000001U  /*!< fclk_pres = fclk/2   */
+#define IRDA_PRESCALER_DIV4    0x00000002U  /*!< fclk_pres = fclk/4   */
+#define IRDA_PRESCALER_DIV6    0x00000003U  /*!< fclk_pres = fclk/6   */
+#define IRDA_PRESCALER_DIV8    0x00000004U  /*!< fclk_pres = fclk/8   */
+#define IRDA_PRESCALER_DIV10   0x00000005U  /*!< fclk_pres = fclk/10  */
+#define IRDA_PRESCALER_DIV12   0x00000006U  /*!< fclk_pres = fclk/12  */
+#define IRDA_PRESCALER_DIV16   0x00000007U  /*!< fclk_pres = fclk/16  */
+#define IRDA_PRESCALER_DIV32   0x00000008U  /*!< fclk_pres = fclk/32  */
+#define IRDA_PRESCALER_DIV64   0x00000009U  /*!< fclk_pres = fclk/64  */
+#define IRDA_PRESCALER_DIV128  0x0000000AU  /*!< fclk_pres = fclk/128 */
+#define IRDA_PRESCALER_DIV256  0x0000000BU  /*!< fclk_pres = fclk/256 */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_State IRDA State
+  * @{
+  */
+#define IRDA_STATE_DISABLE                  0x00000000U     /*!< IRDA disabled  */
+#define IRDA_STATE_ENABLE                   USART_CR1_UE    /*!< IRDA enabled   */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Mode IRDA Mode
+  * @{
+  */
+#define IRDA_MODE_DISABLE                   0x00000000U      /*!< Associated UART disabled in IRDA mode */
+#define IRDA_MODE_ENABLE                    USART_CR3_IREN   /*!< Associated UART enabled in IRDA mode  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLE         0x00000000U       /*!< One-bit sampling disabled */
+#define IRDA_ONE_BIT_SAMPLE_ENABLE          USART_CR3_ONEBIT  /*!< One-bit sampling enabled  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+  * @{
+  */
+#define IRDA_DMA_TX_DISABLE                 0x00000000U       /*!< IRDA DMA TX disabled */
+#define IRDA_DMA_TX_ENABLE                  USART_CR3_DMAT    /*!< IRDA DMA TX enabled  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+  * @{
+  */
+#define IRDA_DMA_RX_DISABLE                 0x00000000U       /*!< IRDA DMA RX disabled */
+#define IRDA_DMA_RX_ENABLE                  USART_CR3_DMAR    /*!< IRDA DMA RX enabled  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+  * @{
+  */
+#define IRDA_AUTOBAUD_REQUEST            USART_RQR_ABRRQ        /*!< Auto-Baud Rate Request      */
+#define IRDA_RXDATA_FLUSH_REQUEST        USART_RQR_RXFRQ        /*!< Receive Data flush Request  */
+#define IRDA_TXDATA_FLUSH_REQUEST        USART_RQR_TXFRQ        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Flags IRDA Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define IRDA_FLAG_REACK                     USART_ISR_REACK         /*!< IRDA receive enable acknowledge flag      */
+#define IRDA_FLAG_TEACK                     USART_ISR_TEACK         /*!< IRDA transmit enable acknowledge flag     */
+#define IRDA_FLAG_BUSY                      USART_ISR_BUSY          /*!< IRDA busy flag                            */
+#define IRDA_FLAG_ABRF                      USART_ISR_ABRF          /*!< IRDA auto Baud rate flag                  */
+#define IRDA_FLAG_ABRE                      USART_ISR_ABRE          /*!< IRDA auto Baud rate error                 */
+#define IRDA_FLAG_TXE                       USART_ISR_TXE_TXFNF     /*!< IRDA transmit data register empty         */
+#define IRDA_FLAG_TC                        USART_ISR_TC            /*!< IRDA transmission complete                */
+#define IRDA_FLAG_RXNE                      USART_ISR_RXNE_RXFNE    /*!< IRDA read data register not empty         */
+#define IRDA_FLAG_ORE                       USART_ISR_ORE           /*!< IRDA overrun error                        */
+#define IRDA_FLAG_NE                        USART_ISR_NE            /*!< IRDA noise error                          */
+#define IRDA_FLAG_FE                        USART_ISR_FE            /*!< IRDA frame error                          */
+#define IRDA_FLAG_PE                        USART_ISR_PE            /*!< IRDA parity error                         */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+#define IRDA_IT_PE                          0x0028U     /*!< IRDA Parity error interruption                 */
+#define IRDA_IT_TXE                         0x0727U     /*!< IRDA Transmit data register empty interruption */
+#define IRDA_IT_TC                          0x0626U     /*!< IRDA Transmission complete interruption        */
+#define IRDA_IT_RXNE                        0x0525U     /*!< IRDA Read data register not empty interruption */
+#define IRDA_IT_IDLE                        0x0424U     /*!< IRDA Idle interruption                         */
+
+/*       Elements values convention: 000000000XXYYYYYb
+             - YYYYY  : Interrupt source position in the XX register (5bits)
+             - XX  : Interrupt source register (2bits)
+                   - 01: CR1 register
+                   - 10: CR2 register
+                   - 11: CR3 register */
+#define IRDA_IT_ERR                         0x0060U       /*!< IRDA Error interruption        */
+
+/*       Elements values convention: 0000ZZZZ00000000b
+             - ZZZZ  : Flag position in the ISR register(4bits) */
+#define IRDA_IT_ORE                         0x0300U      /*!< IRDA Overrun error interruption */
+#define IRDA_IT_NE                          0x0200U      /*!< IRDA Noise error interruption   */
+#define IRDA_IT_FE                          0x0100U      /*!< IRDA Frame error interruption   */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+  * @{
+  */
+#define IRDA_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag          */
+#define IRDA_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag         */
+#define IRDA_CLEAR_NEF                       USART_ICR_NECF            /*!< Noise Error detected Clear Flag  */
+#define IRDA_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag         */
+#define IRDA_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< IDLE line detected Clear Flag    */
+#define IRDA_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask
+  * @{
+  */
+#define IRDA_IT_MASK  0x001FU  /*!< IRDA Interruptions flags mask  */
+#define IRDA_CR_MASK  0x00E0U  /*!< IRDA control register mask     */
+#define IRDA_CR_POS   5U       /*!< IRDA control register position */
+#define IRDA_ISR_MASK 0x1F00U  /*!< IRDA ISR register mask         */
+#define IRDA_ISR_POS  8U       /*!< IRDA ISR register position     */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+  * @{
+  */
+
+/** @brief  Reset IRDA handle state.
+  * @param  __HANDLE__ IRDA handle.
+  * @retval None
+  */
+#if USE_HAL_IRDA_REGISTER_CALLBACKS == 1
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_IRDA_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET;     \
+                                                       (__HANDLE__)->MspInitCallback = NULL;             \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;           \
+                                                     } while(0U)
+#else
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->gState = HAL_IRDA_STATE_RESET;      \
+                                                       (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET;     \
+                                                     } while(0U)
+#endif /*USE_HAL_IRDA_REGISTER_CALLBACKS  */
+
+/** @brief  Flush the IRDA DR register.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__)                            \
+  do{                                                                    \
+    SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \
+    SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \
+  } while(0U)
+
+/** @brief  Clear the specified IRDA pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg @ref IRDA_CLEAR_PEF
+  *            @arg @ref IRDA_CLEAR_FEF
+  *            @arg @ref IRDA_CLEAR_NEF
+  *            @arg @ref IRDA_CLEAR_OREF
+  *            @arg @ref IRDA_CLEAR_TCF
+  *            @arg @ref IRDA_CLEAR_IDLEF
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/** @brief  Clear the IRDA PE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)    __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF)
+
+
+/** @brief  Clear the IRDA FE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__)    __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF)
+
+/** @brief  Clear the IRDA NE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__)    __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF)
+
+/** @brief  Clear the IRDA ORE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__)    __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF)
+
+/** @brief  Clear the IRDA IDLE pending flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__)   __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF)
+
+/** @brief  Check whether the specified IRDA flag is set or not.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag
+  *            @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag
+  *            @arg @ref IRDA_FLAG_BUSY  Busy flag
+  *            @arg @ref IRDA_FLAG_ABRF  Auto Baud rate detection flag
+  *            @arg @ref IRDA_FLAG_ABRE  Auto Baud rate detection error flag
+  *            @arg @ref IRDA_FLAG_TXE   Transmit data register empty flag
+  *            @arg @ref IRDA_FLAG_TC    Transmission Complete flag
+  *            @arg @ref IRDA_FLAG_RXNE  Receive data register not empty flag
+  *            @arg @ref IRDA_FLAG_ORE   OverRun Error flag
+  *            @arg @ref IRDA_FLAG_NE    Noise Error flag
+  *            @arg @ref IRDA_FLAG_FE    Framing Error flag
+  *            @arg @ref IRDA_FLAG_PE    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief  Enable the specified IRDA interrupt.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_IT_TXE  Transmit Data Register empty interrupt
+  *            @arg @ref IRDA_IT_TC   Transmission complete interrupt
+  *            @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+  *            @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+  *            @arg @ref IRDA_IT_PE   Parity Error interrupt
+  *            @arg @ref IRDA_IT_ERR  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((__HANDLE__)->Instance->CR3 |= ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief  Disable the specified IRDA interrupt.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_IT_TXE  Transmit Data Register empty interrupt
+  *            @arg @ref IRDA_IT_TC   Transmission complete interrupt
+  *            @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+  *            @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+  *            @arg @ref IRDA_IT_PE   Parity Error interrupt
+  *            @arg @ref IRDA_IT_ERR  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief  Check whether the specified IRDA interrupt has occurred or not.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+  *            @arg @ref IRDA_IT_TC  Transmission complete interrupt
+  *            @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+  *            @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+  *            @arg @ref IRDA_IT_ORE OverRun Error interrupt
+  *            @arg @ref IRDA_IT_NE Noise Error interrupt
+  *            @arg @ref IRDA_IT_FE Framing Error interrupt
+  *            @arg @ref IRDA_IT_PE Parity Error interrupt
+  * @retval The new state of __IT__ (SET or RESET).
+  */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR\
+                                                        & (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>> IRDA_ISR_POS))) != 0U) ? SET : RESET)
+
+/** @brief  Check whether the specified IRDA interrupt source is enabled or not.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __INTERRUPT__ specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt
+  *            @arg @ref IRDA_IT_TC  Transmission complete interrupt
+  *            @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt
+  *            @arg @ref IRDA_IT_IDLE Idle line detection interrupt
+  *            @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt
+  *            @arg @ref IRDA_IT_PE Parity Error interrupt
+  * @retval The new state of __IT__ (SET or RESET).
+  */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x01U)? (__HANDLE__)->Instance->CR1 : \
+                                                                (((((__INTERRUPT__) & IRDA_CR_MASK) >> IRDA_CR_POS) == 0x02U)? (__HANDLE__)->Instance->CR2 : \
+                                                                 (__HANDLE__)->Instance->CR3)) & ((uint32_t)0x01U << (((uint16_t)(__INTERRUPT__)) & IRDA_IT_MASK))) != 0U) ? SET : RESET)
+
+/** @brief  Clear the specified IRDA ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag
+  *            @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag
+  *            @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag
+  *            @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag
+  *            @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief  Set a specific IRDA request flag.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __REQ__ specifies the request flag to set
+  *          This parameter can be one of the following values:
+  *            @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request
+  *            @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request
+  *            @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request
+  * @retval None
+  */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief  Enable the IRDA one bit sample method.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Disable the IRDA one bit sample method.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3\
+                                                       &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable UART/USART associated to IRDA Handle.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART/USART associated to IRDA Handle.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Macros
+  * @{
+  */
+
+/** @brief  Ensure that IRDA Baud rate is less or equal to maximum value.
+  * @param  __BAUDRATE__ specifies the IRDA Baudrate set by the user.
+  * @retval True or False
+  */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U)
+
+/** @brief  Ensure that IRDA prescaler value is strictly larger than 0.
+  * @param  __PRESCALER__ specifies the IRDA prescaler value set by the user.
+  * @retval True or False
+  */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U)
+
+/** @brief Ensure that IRDA frame parity is valid.
+  * @param __PARITY__ IRDA frame parity.
+  * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
+  */
+#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \
+                                    ((__PARITY__) == IRDA_PARITY_EVEN) || \
+                                    ((__PARITY__) == IRDA_PARITY_ODD))
+
+/** @brief Ensure that IRDA communication mode is valid.
+  * @param __MODE__ IRDA communication mode.
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */
+#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__)\
+                                        & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U))
+
+/** @brief Ensure that IRDA power mode is valid.
+  * @param __MODE__ IRDA power mode.
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */
+#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \
+                                     ((__MODE__) == IRDA_POWERMODE_NORMAL))
+
+/** @brief Ensure that IRDA clock Prescaler is valid.
+  * @param __CLOCKPRESCALER__ IRDA clock Prescaler value.
+  * @retval SET (__CLOCKPRESCALER__ is valid) or RESET (__CLOCKPRESCALER__ is invalid)
+  */
+#define IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) (((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV1) || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV2)   || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV4)   || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV6)   || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV8)   || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV10)  || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV12)  || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV16)  || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV32)  || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV64)  || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV128) || \
+                                                    ((__CLOCKPRESCALER__) == IRDA_PRESCALER_DIV256))
+
+/** @brief Ensure that IRDA state is valid.
+  * @param __STATE__ IRDA state mode.
+  * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid)
+  */
+#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \
+                                  ((__STATE__) == IRDA_STATE_ENABLE))
+
+/** @brief Ensure that IRDA associated UART/USART mode is valid.
+  * @param __MODE__ IRDA associated UART/USART mode.
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */
+#define IS_IRDA_MODE(__MODE__)  (((__MODE__) == IRDA_MODE_DISABLE) || \
+                                 ((__MODE__) == IRDA_MODE_ENABLE))
+
+/** @brief Ensure that IRDA sampling rate is valid.
+  * @param __ONEBIT__ IRDA sampling rate.
+  * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
+  */
+#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__)      (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \
+                                                 ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE))
+
+/** @brief Ensure that IRDA DMA TX mode is valid.
+  * @param __DMATX__ IRDA DMA TX mode.
+  * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid)
+  */
+#define IS_IRDA_DMA_TX(__DMATX__)     (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \
+                                       ((__DMATX__) == IRDA_DMA_TX_ENABLE))
+
+/** @brief Ensure that IRDA DMA RX mode is valid.
+  * @param __DMARX__ IRDA DMA RX mode.
+  * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid)
+  */
+#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \
+                                   ((__DMARX__) == IRDA_DMA_RX_ENABLE))
+
+/** @brief Ensure that IRDA request is valid.
+  * @param __PARAM__ IRDA request.
+  * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+  */
+#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \
+                                              ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \
+                                              ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+  * @}
+  */
+
+/* Include IRDA HAL Extended module */
+#include "stm32h7xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+  * @{
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+#if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID,
+                                            pIRDA_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+/* Transfer Abort functions */
+HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda);
+
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda);
+
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  ************************************************/
+
+/** @addtogroup IRDA_Exported_Functions_Group4 Peripheral State and Error functions
+  * @{
+  */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t              HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_irda_ex.h

@@ -0,0 +1,650 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_irda_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of IRDA HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_IRDA_EX_H
+#define STM32H7xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IRDAEx IRDAEx
+  * @brief IRDA Extended HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants
+  * @{
+  */
+
+/** @defgroup IRDAEx_Word_Length IRDAEx Word Length
+  * @{
+  */
+#define IRDA_WORDLENGTH_7B                  USART_CR1_M1   /*!< 7-bit long frame */
+#define IRDA_WORDLENGTH_8B                  0x00000000U    /*!< 8-bit long frame */
+#define IRDA_WORDLENGTH_9B                  USART_CR1_M0   /*!< 9-bit long frame */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros
+  * @{
+  */
+
+/** @brief  Report the IRDA clock source.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @param  __CLOCKSOURCE__ output variable.
+  * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+  */
+#if defined(UART9) && defined(USART10)
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
+  do {                                                        \
+    if((__HANDLE__)->Instance == USART1)                      \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART1_SOURCE())                   \
+      {                                                       \
+        case RCC_USART1CLKSOURCE_D2PCLK2:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART2)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART2_SOURCE())                   \
+      {                                                       \
+        case RCC_USART2CLKSOURCE_D2PCLK1:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART3)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART3_SOURCE())                   \
+      {                                                       \
+        case RCC_USART3CLKSOURCE_D2PCLK1:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART4)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART4_SOURCE())                    \
+      {                                                       \
+        case RCC_UART4CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if ((__HANDLE__)->Instance == UART5)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART5_SOURCE())                    \
+      {                                                       \
+        case RCC_UART5CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART6)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART6_SOURCE())                   \
+      {                                                       \
+        case RCC_USART6CLKSOURCE_D2PCLK2:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART7)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART7_SOURCE())                    \
+      {                                                       \
+        case RCC_UART7CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART8)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART8_SOURCE())                    \
+      {                                                       \
+        case RCC_UART8CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART9)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART9_SOURCE())                    \
+      {                                                       \
+        case RCC_UART9CLKSOURCE_D2PCLK2:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_UART9CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART9CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART9CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART9CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART9CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART10)                \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART10_SOURCE())                  \
+      {                                                       \
+        case RCC_USART10CLKSOURCE_D2PCLK2:                    \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_USART10CLKSOURCE_PLL2:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART10CLKSOURCE_PLL3:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART10CLKSOURCE_HSI:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART10CLKSOURCE_CSI:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART10CLKSOURCE_LSE:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else                                                      \
+    {                                                         \
+      (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;         \
+    }                                                         \
+  } while(0U)
+#else
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
+  do {                                                        \
+    if((__HANDLE__)->Instance == USART1)                      \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART1_SOURCE())                   \
+      {                                                       \
+        case RCC_USART1CLKSOURCE_D2PCLK2:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART2)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART2_SOURCE())                   \
+      {                                                       \
+        case RCC_USART2CLKSOURCE_D2PCLK1:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART3)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART3_SOURCE())                   \
+      {                                                       \
+        case RCC_USART3CLKSOURCE_D2PCLK1:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART4)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART4_SOURCE())                    \
+      {                                                       \
+        case RCC_UART4CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if ((__HANDLE__)->Instance == UART5)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART5_SOURCE())                    \
+      {                                                       \
+        case RCC_UART5CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART6)                 \
+    {                                                         \
+      switch(__HAL_RCC_GET_USART6_SOURCE())                   \
+      {                                                       \
+        case RCC_USART6CLKSOURCE_D2PCLK2:                     \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK2;       \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_PLL2:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_PLL3:                        \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_CSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART7)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART7_SOURCE())                    \
+      {                                                       \
+        case RCC_UART7CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART8)                  \
+    {                                                         \
+      switch(__HAL_RCC_GET_UART8_SOURCE())                    \
+      {                                                       \
+        case RCC_UART8CLKSOURCE_D2PCLK1:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_D2PCLK1;       \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_PLL2:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL2Q;         \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_PLL3:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PLL3Q;         \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_CSI:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_CSI;           \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;     \
+          break;                                              \
+      }                                                       \
+    }                                                         \
+    else                                                      \
+    {                                                         \
+      (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED;         \
+    }                                                         \
+  } while(0U)
+#endif /* UART9 && USART10 */
+
+/** @brief  Compute the mask to apply to retrieve the received data
+  *         according to the word length and to the parity bits activation.
+  * @param  __HANDLE__ specifies the IRDA Handle.
+  * @retval None, the mask to apply to the associated UART RDR register is stored in (__HANDLE__)->Mask field.
+  */
+#define IRDA_MASK_COMPUTATION(__HANDLE__)                             \
+  do {                                                                \
+    if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B)          \
+    {                                                                 \
+      if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)              \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x01FFU ;                                \
+      }                                                               \
+      else                                                            \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x00FFU ;                                \
+      }                                                               \
+    }                                                                 \
+    else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B)     \
+    {                                                                 \
+      if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)              \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x00FFU ;                                \
+      }                                                               \
+      else                                                            \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x007FU ;                                \
+      }                                                               \
+    }                                                                 \
+    else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B)     \
+    {                                                                 \
+      if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)              \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x007FU ;                                \
+      }                                                               \
+      else                                                            \
+      {                                                               \
+        (__HANDLE__)->Mask = 0x003FU ;                                \
+      }                                                               \
+    }                                                                 \
+    else                                                              \
+    {                                                                 \
+      (__HANDLE__)->Mask = 0x0000U;                                   \
+    }                                                                 \
+  } while(0U)
+
+/** @brief Ensure that IRDA frame length is valid.
+  * @param __LENGTH__ IRDA frame length.
+  * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+  */
+#define IS_IRDA_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == IRDA_WORDLENGTH_7B) || \
+                                         ((__LENGTH__) == IRDA_WORDLENGTH_8B) || \
+                                         ((__LENGTH__) == IRDA_WORDLENGTH_9B))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_iwdg.h

@@ -0,0 +1,242 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_iwdg.h
+  * @author  MCD Application Team
+  * @brief   Header file of IWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_IWDG_H
+#define STM32H7xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IWDG IWDG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+  * @{
+  */
+
+/**
+  * @brief  IWDG Init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Select the prescaler of the IWDG.
+                            This parameter can be a value of @ref IWDG_Prescaler */
+
+  uint32_t Reload;     /*!< Specifies the IWDG down-counter reload value.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+  uint32_t Window;     /*!< Specifies the window value to be compared to the down-counter.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+  * @brief  IWDG Handle Structure definition
+  */
+typedef struct
+{
+  IWDG_TypeDef                 *Instance;  /*!< Register base address    */
+
+  IWDG_InitTypeDef             Init;       /*!< IWDG required parameters */
+} IWDG_HandleTypeDef;
+
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+  * @{
+  */
+#define IWDG_PRESCALER_4                0x00000000u                                     /*!< IWDG prescaler set to 4   */
+#define IWDG_PRESCALER_8                IWDG_PR_PR_0                                    /*!< IWDG prescaler set to 8   */
+#define IWDG_PRESCALER_16               IWDG_PR_PR_1                                    /*!< IWDG prescaler set to 16  */
+#define IWDG_PRESCALER_32               (IWDG_PR_PR_1 | IWDG_PR_PR_0)                   /*!< IWDG prescaler set to 32  */
+#define IWDG_PRESCALER_64               IWDG_PR_PR_2                                    /*!< IWDG prescaler set to 64  */
+#define IWDG_PRESCALER_128              (IWDG_PR_PR_2 | IWDG_PR_PR_0)                   /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256              (IWDG_PR_PR_2 | IWDG_PR_PR_1)                   /*!< IWDG prescaler set to 256 */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Window_option IWDG Window option
+  * @{
+  */
+#define IWDG_WINDOW_DISABLE             IWDG_WINR_WIN
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the IWDG peripheral.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_START(__HANDLE__)                WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+  * @brief  Reload IWDG counter with value defined in the reload register
+  *         (write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers disabled).
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__)       WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Functions  IWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and Start functions
+  * @{
+  */
+/* Initialization/Start functions  ********************************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IWDG_Private_Constants IWDG Private Constants
+  * @{
+  */
+
+/**
+  * @brief  IWDG Key Register BitMask
+  */
+#define IWDG_KEY_RELOAD                 0x0000AAAAu  /*!< IWDG Reload Counter Enable   */
+#define IWDG_KEY_ENABLE                 0x0000CCCCu  /*!< IWDG Peripheral Enable       */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE    0x00005555u  /*!< IWDG KR Write Access Enable  */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE   0x00000000u  /*!< IWDG KR Write Access Disable */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__)  WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+  * @brief  Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+  * @param  __HANDLE__  IWDG handle
+  * @retval None
+  */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+  * @brief  Check IWDG prescaler value.
+  * @param  __PRESCALER__  IWDG prescaler value
+  * @retval None
+  */
+#define IS_IWDG_PRESCALER(__PRESCALER__)      (((__PRESCALER__) == IWDG_PRESCALER_4)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_8)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+  * @brief  Check IWDG reload value.
+  * @param  __RELOAD__  IWDG reload value
+  * @retval None
+  */
+#define IS_IWDG_RELOAD(__RELOAD__)            ((__RELOAD__) <= IWDG_RLR_RL)
+
+/**
+  * @brief  Check IWDG window value.
+  * @param  __WINDOW__  IWDG window value
+  * @retval None
+  */
+#define IS_IWDG_WINDOW(__WINDOW__)            ((__WINDOW__) <= IWDG_WINR_WIN)
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_jpeg.h

@@ -0,0 +1,655 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_jpeg.h
+  * @author  MCD Application Team
+  * @brief   Header file of JPEG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_JPEG_H
+#define STM32H7xx_HAL_JPEG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (JPEG)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup JPEG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup JPEG_Exported_Types JPEG Exported Types
+  * @{
+  */
+
+/** @defgroup JPEG_Configuration_Structure_definition JPEG Configuration for encoding Structure definition
+  * @brief  JPEG encoding configuration Structure definition
+  * @{
+  */
+typedef struct
+{
+  uint32_t ColorSpace;               /*!< Image Color space : gray-scale, YCBCR, RGB or CMYK
+                                           This parameter can be a value of @ref JPEG_ColorSpace */
+
+  uint32_t ChromaSubsampling;        /*!< Chroma Subsampling in case of YCBCR or CMYK color space, 0-> 4:4:4 , 1-> 4:2:2, 2 -> 4:1:1, 3 -> 4:2:0
+                                           This parameter can be a value of @ref JPEG_ChromaSubsampling */
+
+  uint32_t ImageHeight;              /*!< Image height : number of lines */
+
+  uint32_t ImageWidth;               /*!< Image width : number of pixels per line */
+
+  uint32_t ImageQuality;             /*!< Quality of the JPEG encoding : from 1 to 100 */
+
+} JPEG_ConfTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_JPEG_state_structure_definition HAL JPEG state structure definition
+  * @brief  HAL JPEG State structure definition
+  * @{
+  */
+typedef enum
+{
+  HAL_JPEG_STATE_RESET              = 0x00U,  /*!< JPEG not yet initialized or disabled  */
+  HAL_JPEG_STATE_READY              = 0x01U,  /*!< JPEG initialized and ready for use    */
+  HAL_JPEG_STATE_BUSY               = 0x02U,  /*!< JPEG internal processing is ongoing   */
+  HAL_JPEG_STATE_BUSY_ENCODING      = 0x03U,  /*!< JPEG encoding processing is ongoing   */
+  HAL_JPEG_STATE_BUSY_DECODING      = 0x04U,  /*!< JPEG decoding processing is ongoing   */
+  HAL_JPEG_STATE_TIMEOUT            = 0x05U,  /*!< JPEG timeout state                    */
+  HAL_JPEG_STATE_ERROR              = 0x06U   /*!< JPEG error state                      */
+} HAL_JPEG_STATETypeDef;
+
+/**
+  * @}
+  */
+
+
+/** @defgroup JPEG_handle_Structure_definition JPEG handle Structure definition
+  * @brief  JPEG handle Structure definition
+  * @{
+  */
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+typedef struct __JPEG_HandleTypeDef
+#else
+typedef struct
+#endif /* (USE_HAL_JPEG_REGISTER_CALLBACKS) */
+{
+  JPEG_TypeDef             *Instance;        /*!< JPEG peripheral register base address */
+
+  JPEG_ConfTypeDef         Conf;             /*!< Current JPEG encoding/decoding parameters */
+
+  uint8_t                  *pJpegInBuffPtr;  /*!< Pointer to JPEG processing (encoding, decoding,...) input buffer */
+
+  uint8_t                  *pJpegOutBuffPtr; /*!< Pointer to JPEG processing (encoding, decoding,...) output buffer */
+
+  __IO uint32_t            JpegInCount;      /*!< Internal Counter of input data */
+
+  __IO uint32_t            JpegOutCount;     /*!< Internal Counter of output data */
+
+  uint32_t                 InDataLength;     /*!< Input Buffer Length in Bytes */
+
+  uint32_t                 OutDataLength;    /*!< Output Buffer Length in Bytes */
+
+  MDMA_HandleTypeDef        *hdmain;          /*!< JPEG In MDMA handle parameters */
+
+  MDMA_HandleTypeDef        *hdmaout;         /*!< JPEG Out MDMA handle parameters */
+
+  uint8_t                  CustomQuanTable;  /*!< If set to 1 specify that user customized quantization tables are used */
+
+  uint8_t                  *QuantTable0;     /*!< Basic Quantization Table for component 0 */
+
+  uint8_t                  *QuantTable1;     /*!< Basic Quantization Table for component 1 */
+
+  uint8_t                  *QuantTable2;     /*!< Basic Quantization Table for component 2 */
+
+  uint8_t                  *QuantTable3;     /*!< Basic Quantization Table for component 3 */
+
+  HAL_LockTypeDef          Lock;             /*!< JPEG locking object */
+
+  __IO  HAL_JPEG_STATETypeDef State;         /*!< JPEG peripheral state */
+
+  __IO  uint32_t           ErrorCode;        /*!< JPEG Error code */
+
+  __IO uint32_t Context;                     /*!< JPEG Internal context */
+
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+  void (*InfoReadyCallback)(struct __JPEG_HandleTypeDef *hjpeg,
+                            JPEG_ConfTypeDef *pInfo);  /*!< JPEG Info ready callback      */
+  void (*EncodeCpltCallback)(struct __JPEG_HandleTypeDef
+                             *hjpeg);                          /*!< JPEG Encode complete callback */
+  void (*DecodeCpltCallback)(struct __JPEG_HandleTypeDef
+                             *hjpeg);                          /*!< JPEG Decode complete callback */
+  void (*ErrorCallback)(struct __JPEG_HandleTypeDef
+                        *hjpeg);                               /*!< JPEG Error callback           */
+  void (*GetDataCallback)(struct __JPEG_HandleTypeDef *hjpeg,
+                          uint32_t NbDecodedData);     /*!< JPEG Get Data callback        */
+  void (*DataReadyCallback)(struct __JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut,
+                            uint32_t OutDataLength);   /*!< JPEG Data ready callback */
+
+  void (* MspInitCallback)(struct __JPEG_HandleTypeDef *hjpeg);                            /*!< JPEG Msp Init callback  */
+  void (* MspDeInitCallback)(struct __JPEG_HandleTypeDef
+                             *hjpeg);                          /*!< JPEG Msp DeInit callback  */
+
+
+#endif /* (USE_HAL_JPEG_REGISTER_CALLBACKS) */
+
+
+} JPEG_HandleTypeDef;
+/**
+  * @}
+  */
+
+
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+/** @defgroup HAL_JPEG_Callback_ID_enumeration_definition HAL JPEG Callback ID enumeration definition
+  * @brief  HAL JPEG Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_JPEG_ENCODE_CPLT_CB_ID    = 0x01U,    /*!< JPEG Encode Complete callback ID */
+  HAL_JPEG_DECODE_CPLT_CB_ID    = 0x02U,    /*!< JPEG Decode Complete callback ID */
+  HAL_JPEG_ERROR_CB_ID          = 0x03U,    /*!< JPEG Error callback ID           */
+
+  HAL_JPEG_MSPINIT_CB_ID        = 0x04U,    /*!< JPEG MspInit callback ID         */
+  HAL_JPEG_MSPDEINIT_CB_ID      = 0x05U     /*!< JPEG MspDeInit callback ID       */
+
+} HAL_JPEG_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_JPEG_Callback_pointer_definition HAL JPEG Callback pointer definition
+  * @brief  HAL JPEG Callback pointer definition
+  * @{
+  */
+typedef  void (*pJPEG_CallbackTypeDef)(JPEG_HandleTypeDef *hjpeg);    /*!< pointer to a common JPEG callback function */
+typedef  void (*pJPEG_InfoReadyCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg,
+                                                JPEG_ConfTypeDef *pInfo);  /*!< pointer to an Info ready JPEG callback function */
+typedef  void (*pJPEG_GetDataCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg,
+                                              uint32_t NbDecodedData);     /*!< pointer to a Get data JPEG callback function */
+typedef  void (*pJPEG_DataReadyCallbackTypeDef)(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut,
+                                                uint32_t OutDataLength);  /*!< pointer to a Data ready JPEG callback function */
+/**
+  * @}
+  */
+
+#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup JPEG_Exported_Constants JPEG Exported Constants
+  * @{
+  */
+
+/** @defgroup JPEG_Error_Code_definition JPEG Error Code definition
+  * @brief  JPEG Error Code definition
+  * @{
+  */
+
+#define  HAL_JPEG_ERROR_NONE        ((uint32_t)0x00000000U)    /*!< No error             */
+#define  HAL_JPEG_ERROR_HUFF_TABLE  ((uint32_t)0x00000001U)    /*!< HUffman Table programming error */
+#define  HAL_JPEG_ERROR_QUANT_TABLE ((uint32_t)0x00000002U)    /*!< Quantization Table programming error */
+#define  HAL_JPEG_ERROR_DMA         ((uint32_t)0x00000004U)    /*!< DMA transfer error   */
+#define  HAL_JPEG_ERROR_TIMEOUT     ((uint32_t)0x00000008U)    /*!< Timeout error        */
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+#define  HAL_JPEG_ERROR_INVALID_CALLBACK ((uint32_t)0x00000010U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup JPEG_Quantization_Table_Size JPEG Quantization Table Size
+  * @brief  JPEG Quantization Table Size
+  * @{
+  */
+#define JPEG_QUANT_TABLE_SIZE  ((uint32_t)64U) /*!< JPEG Quantization Table Size in bytes  */
+/**
+  * @}
+  */
+
+
+/** @defgroup JPEG_ColorSpace JPEG ColorSpace
+  * @brief  JPEG Color Space
+  * @{
+  */
+#define JPEG_GRAYSCALE_COLORSPACE     ((uint32_t)0x00000000U)
+#define JPEG_YCBCR_COLORSPACE         JPEG_CONFR1_COLORSPACE_0
+#define JPEG_CMYK_COLORSPACE          JPEG_CONFR1_COLORSPACE
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup JPEG_ChromaSubsampling JPEG Chrominance Sampling
+  * @brief  JPEG Chrominance Sampling
+  * @{
+  */
+#define JPEG_444_SUBSAMPLING     ((uint32_t)0x00000000U)   /*!< Chroma Subsampling 4:4:4 */
+#define JPEG_420_SUBSAMPLING     ((uint32_t)0x00000001U)   /*!< Chroma Subsampling 4:2:0 */
+#define JPEG_422_SUBSAMPLING     ((uint32_t)0x00000002U)   /*!< Chroma Subsampling 4:2:2 */
+
+/**
+  * @}
+  */
+
+/** @defgroup JPEG_ImageQuality JPEG Image Quality
+  * @brief  JPEG Min and Max Image Quality
+  * @{
+  */
+#define JPEG_IMAGE_QUALITY_MIN     ((uint32_t)1U)     /*!< Minimum JPEG quality */
+#define JPEG_IMAGE_QUALITY_MAX     ((uint32_t)100U)   /*!< Maximum JPEG quality */
+
+/**
+  * @}
+  */
+
+/** @defgroup JPEG_Interrupt_configuration_definition JPEG Interrupt configuration definition
+  * @brief JPEG Interrupt definition
+  * @{
+  */
+#define JPEG_IT_IFT     ((uint32_t)JPEG_CR_IFTIE)   /*!< Input FIFO Threshold Interrupt */
+#define JPEG_IT_IFNF    ((uint32_t)JPEG_CR_IFNFIE)  /*!< Input FIFO Not Full Interrupt */
+#define JPEG_IT_OFT     ((uint32_t)JPEG_CR_OFTIE)   /*!< Output FIFO Threshold Interrupt */
+#define JPEG_IT_OFNE    ((uint32_t)JPEG_CR_OFTIE)   /*!< Output FIFO Not Empty Interrupt */
+#define JPEG_IT_EOC     ((uint32_t)JPEG_CR_EOCIE)   /*!< End of Conversion Interrupt */
+#define JPEG_IT_HPD     ((uint32_t)JPEG_CR_HPDIE)   /*!< Header Parsing Done Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup JPEG_Flag_definition JPEG Flag definition
+  * @brief JPEG Flags definition
+  * @{
+  */
+#define JPEG_FLAG_IFTF     ((uint32_t)JPEG_SR_IFTF)   /*!< Input FIFO is not full and is bellow its threshold flag */
+#define JPEG_FLAG_IFNFF    ((uint32_t)JPEG_SR_IFNFF)  /*!< Input FIFO Not Full Flag, a data can be written */
+#define JPEG_FLAG_OFTF     ((uint32_t)JPEG_SR_OFTF)   /*!< Output FIFO is not empty and has reach its threshold */
+#define JPEG_FLAG_OFNEF    ((uint32_t)JPEG_SR_OFNEF)  /*!< Output FIFO is not empty, a data is available  */
+#define JPEG_FLAG_EOCF     ((uint32_t)JPEG_SR_EOCF)   /*!< JPEG Codec core has finished the encoding or the decoding process and than last data has been sent to the output FIFO  */
+#define JPEG_FLAG_HPDF     ((uint32_t)JPEG_SR_HPDF)   /*!< JPEG Codec has finished the parsing of the headers and the internal registers have been updated  */
+#define JPEG_FLAG_COF      ((uint32_t)JPEG_SR_COF)    /*!< JPEG Codec operation on going  flag*/
+
+#define JPEG_FLAG_ALL      ((uint32_t)0x000000FEU)     /*!< JPEG Codec All previous flag*/
+/**
+  * @}
+  */
+
+/** @defgroup JPEG_PROCESS_PAUSE_RESUME_definition JPEG Process Pause Resume definition
+  * @brief JPEG process pause, resume definition
+  * @{
+  */
+#define JPEG_PAUSE_RESUME_INPUT          ((uint32_t)0x00000001U)     /*!< Pause/Resume Input FIFO Xfer*/
+#define JPEG_PAUSE_RESUME_OUTPUT         ((uint32_t)0x00000002U)     /*!< Pause/Resume Output FIFO Xfer*/
+#define JPEG_PAUSE_RESUME_INPUT_OUTPUT   ((uint32_t)0x00000003U)     /*!< Pause/Resume Input and Output FIFO Xfer*/
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup JPEG_Exported_Macros JPEG Exported Macros
+  * @{
+  */
+
+/** @brief Reset JPEG handle state
+  * @param  __HANDLE__ specifies the JPEG handle.
+  * @retval None
+  */
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+#define __HAL_JPEG_RESET_HANDLE_STATE(__HANDLE__) do{\
+                                                      (__HANDLE__)->State = HAL_JPEG_STATE_RESET;\
+                                                      (__HANDLE__)->MspInitCallback = NULL;\
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;\
+                                                      }while(0)
+#else
+#define __HAL_JPEG_RESET_HANDLE_STATE(__HANDLE__) ( (__HANDLE__)->State = HAL_JPEG_STATE_RESET)
+#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */
+
+
+/**
+  * @brief  Enable the JPEG peripheral.
+  * @param  __HANDLE__ specifies the JPEG handle.
+  * @retval None
+  */
+#define __HAL_JPEG_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  JPEG_CR_JCEN)
+
+/**
+  * @brief Disable the JPEG peripheral.
+  * @param  __HANDLE__ specifies the JPEG handle.
+  * @retval None
+  */
+#define __HAL_JPEG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &=  ~JPEG_CR_JCEN)
+
+
+/**
+  * @brief  Check the specified JPEG status flag.
+  * @param  __HANDLE__ specifies the JPEG handle.
+  * @param  __FLAG__  specifies the flag to check
+  *         This parameter can be one of the following values:
+  *         @arg JPEG_FLAG_IFTF  : The input FIFO is not full and is bellow its threshold flag
+  *         @arg JPEG_FLAG_IFNFF : The input FIFO Not Full Flag, a data can be written
+  *         @arg JPEG_FLAG_OFTF  : The output FIFO is not empty and has reach its threshold
+  *         @arg JPEG_FLAG_OFNEF : The output FIFO is not empty, a data is available
+  *         @arg JPEG_FLAG_EOCF  : JPEG Codec core has finished the encoding or the decoding process
+  *                                and than last data has been sent to the output FIFO
+  *         @arg JPEG_FLAG_HPDF  : JPEG Codec has finished the parsing of the headers
+  *                                and the internal registers have been updated
+  *         @arg JPEG_FLAG_COF   : JPEG Codec operation on going  flag
+  *
+  * @retval __HAL_JPEG_GET_FLAG : returns The new state of __FLAG__ (TRUE or FALSE)
+  */
+
+#define __HAL_JPEG_GET_FLAG(__HANDLE__,__FLAG__)  (((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the specified JPEG status flag.
+  * @param  __HANDLE__ specifies the JPEG handle.
+  * @param  __FLAG__  specifies the flag to clear
+  *         This parameter can be one of the following values:
+  *         @arg JPEG_FLAG_EOCF  : JPEG Codec core has finished the encoding or the decoding process
+  *                                and than last data has been sent to the output FIFO
+  *         @arg JPEG_FLAG_HPDF  : JPEG Codec has finished the parsing of the headers
+  * @retval None
+  */
+
+#define __HAL_JPEG_CLEAR_FLAG(__HANDLE__,__FLAG__)  (((__HANDLE__)->Instance->CFR |= ((__FLAG__) & (JPEG_FLAG_EOCF | JPEG_FLAG_HPDF))))
+
+
+/**
+  * @brief  Enable Interrupt.
+  * @param   __HANDLE__ specifies the JPEG handle.
+  * @param  __INTERRUPT__  specifies the interrupt to enable
+  *         This parameter can be one of the following values:
+  *         @arg JPEG_IT_IFT   : Input FIFO Threshold Interrupt
+  *         @arg JPEG_IT_IFNF  : Input FIFO Not Full Interrupt
+  *         @arg JPEG_IT_OFT   : Output FIFO Threshold Interrupt
+  *         @arg JPEG_IT_OFNE  : Output FIFO Not empty Interrupt
+  *         @arg JPEG_IT_EOC   : End of Conversion Interrupt
+  *         @arg JPEG_IT_HPD   : Header Parsing Done Interrupt
+  *
+  * @retval No retrun
+  */
+#define __HAL_JPEG_ENABLE_IT(__HANDLE__,__INTERRUPT__)  ((__HANDLE__)->Instance->CR |= (__INTERRUPT__) )
+
+/**
+  * @brief  Disable Interrupt.
+  * @param   __HANDLE__ specifies the JPEG handle.
+  * @param  __INTERRUPT__ specifies the interrupt to disable
+  *         This parameter can be one of the following values:
+  *         @arg JPEG_IT_IFT   : Input FIFO Threshold Interrupt
+  *         @arg JPEG_IT_IFNF  : Input FIFO Not Full Interrupt
+  *         @arg JPEG_IT_OFT   : Output FIFO Threshold Interrupt
+  *         @arg JPEG_IT_OFNE  : Output FIFO Not empty Interrupt
+  *         @arg JPEG_IT_EOC   : End of Conversion Interrupt
+  *         @arg JPEG_IT_HPD   : Header Parsing Done Interrupt
+  *
+  * @note    To disable an IT we must use MODIFY_REG macro to avoid writing "1" to the FIFO flush bits
+  *          located in the same IT enable register (CR register).
+  * @retval  No retrun
+  */
+#define __HAL_JPEG_DISABLE_IT(__HANDLE__,__INTERRUPT__) MODIFY_REG((__HANDLE__)->Instance->CR, (__INTERRUPT__), 0UL)
+
+
+/**
+  * @brief  Get Interrupt state.
+  * @param   __HANDLE__ specifies the JPEG handle.
+  * @param  __INTERRUPT__  specifies the interrupt to check
+  *         This parameter can be one of the following values:
+  *         @arg JPEG_IT_IFT   : Input FIFO Threshold Interrupt
+  *         @arg JPEG_IT_IFNF  : Input FIFO Not Full Interrupt
+  *         @arg JPEG_IT_OFT   : Output FIFO Threshold Interrupt
+  *         @arg JPEG_IT_OFNE  : Output FIFO Not empty Interrupt
+  *         @arg JPEG_IT_EOC   : End of Conversion Interrupt
+  *         @arg JPEG_IT_HPD   : Header Parsing Done Interrupt
+  *
+  * @retval returns The new state of __INTERRUPT__ (Enabled or disabled)
+  */
+#define __HAL_JPEG_GET_IT_SOURCE(__HANDLE__,__INTERRUPT__)     ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup JPEG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_JPEG_Init(JPEG_HandleTypeDef *hjpeg);
+HAL_StatusTypeDef HAL_JPEG_DeInit(JPEG_HandleTypeDef *hjpeg);
+void HAL_JPEG_MspInit(JPEG_HandleTypeDef *hjpeg);
+void HAL_JPEG_MspDeInit(JPEG_HandleTypeDef *hjpeg);
+
+#if (USE_HAL_JPEG_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_JPEG_RegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID,
+                                            pJPEG_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_JPEG_UnRegisterCallback(JPEG_HandleTypeDef *hjpeg, HAL_JPEG_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_JPEG_RegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg,
+                                                     pJPEG_InfoReadyCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_JPEG_UnRegisterInfoReadyCallback(JPEG_HandleTypeDef *hjpeg);
+
+HAL_StatusTypeDef HAL_JPEG_RegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg, pJPEG_GetDataCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_JPEG_UnRegisterGetDataCallback(JPEG_HandleTypeDef *hjpeg);
+
+HAL_StatusTypeDef HAL_JPEG_RegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg,
+                                                     pJPEG_DataReadyCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_JPEG_UnRegisterDataReadyCallback(JPEG_HandleTypeDef *hjpeg);
+
+#endif /* USE_HAL_JPEG_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group2
+  * @{
+  */
+/* Encoding/Decoding Configuration functions  ********************************/
+HAL_StatusTypeDef HAL_JPEG_ConfigEncoding(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pConf);
+HAL_StatusTypeDef HAL_JPEG_GetInfo(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo);
+HAL_StatusTypeDef HAL_JPEG_EnableHeaderParsing(JPEG_HandleTypeDef *hjpeg);
+HAL_StatusTypeDef HAL_JPEG_DisableHeaderParsing(JPEG_HandleTypeDef *hjpeg);
+HAL_StatusTypeDef HAL_JPEG_SetUserQuantTables(JPEG_HandleTypeDef *hjpeg, uint8_t *QTable0, uint8_t *QTable1,
+                                              uint8_t *QTable2, uint8_t *QTable3);
+
+/**
+  * @}
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group3
+  * @{
+  */
+/* JPEG processing functions  **************************************/
+HAL_StatusTypeDef  HAL_JPEG_Encode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength,
+                                   uint8_t *pDataOut, uint32_t OutDataLength, uint32_t Timeout);
+HAL_StatusTypeDef  HAL_JPEG_Decode(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength,
+                                   uint8_t *pDataOutMCU, uint32_t OutDataLength, uint32_t Timeout);
+HAL_StatusTypeDef  HAL_JPEG_Encode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength,
+                                      uint8_t *pDataOut, uint32_t OutDataLength);
+HAL_StatusTypeDef  HAL_JPEG_Decode_IT(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength,
+                                      uint8_t *pDataOutMCU, uint32_t OutDataLength);
+HAL_StatusTypeDef  HAL_JPEG_Encode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataInMCU, uint32_t InDataLength,
+                                       uint8_t *pDataOut, uint32_t OutDataLength);
+HAL_StatusTypeDef  HAL_JPEG_Decode_DMA(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataIn, uint32_t InDataLength,
+                                       uint8_t *pDataOutMCU, uint32_t OutDataLength);
+HAL_StatusTypeDef  HAL_JPEG_Pause(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection);
+HAL_StatusTypeDef  HAL_JPEG_Resume(JPEG_HandleTypeDef *hjpeg, uint32_t XferSelection);
+void HAL_JPEG_ConfigInputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewInputBuffer, uint32_t InDataLength);
+void HAL_JPEG_ConfigOutputBuffer(JPEG_HandleTypeDef *hjpeg, uint8_t *pNewOutputBuffer, uint32_t OutDataLength);
+HAL_StatusTypeDef HAL_JPEG_Abort(JPEG_HandleTypeDef *hjpeg);
+
+/**
+  * @}
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group4
+  * @{
+  */
+/* JPEG Decode/Encode callback functions  ********************************************************/
+void HAL_JPEG_InfoReadyCallback(JPEG_HandleTypeDef *hjpeg, JPEG_ConfTypeDef *pInfo);
+void HAL_JPEG_EncodeCpltCallback(JPEG_HandleTypeDef *hjpeg);
+void HAL_JPEG_DecodeCpltCallback(JPEG_HandleTypeDef *hjpeg);
+void HAL_JPEG_ErrorCallback(JPEG_HandleTypeDef *hjpeg);
+void HAL_JPEG_GetDataCallback(JPEG_HandleTypeDef *hjpeg, uint32_t NbDecodedData);
+void HAL_JPEG_DataReadyCallback(JPEG_HandleTypeDef *hjpeg, uint8_t *pDataOut, uint32_t OutDataLength);
+
+/**
+  * @}
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group5
+  * @{
+  */
+/* JPEG IRQ handler management  ******************************************************/
+void HAL_JPEG_IRQHandler(JPEG_HandleTypeDef *hjpeg);
+
+/**
+  * @}
+  */
+
+/** @addtogroup JPEG_Exported_Functions_Group6
+  * @{
+  */
+/* Peripheral State and Error functions  ************************************************/
+HAL_JPEG_STATETypeDef  HAL_JPEG_GetState(JPEG_HandleTypeDef *hjpeg);
+uint32_t               HAL_JPEG_GetError(JPEG_HandleTypeDef *hjpeg);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup JPEG_Private_Types JPEG Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup JPEG_Private_Defines JPEG Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup JPEG_Private_Variables JPEG Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup JPEG_Private_Constants JPEG Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup JPEG_Private_Macros JPEG Private Macros
+  * @{
+  */
+
+#define IS_JPEG_CHROMASUBSAMPLING(SUBSAMPLING) (((SUBSAMPLING) == JPEG_444_SUBSAMPLING) || \
+                                                ((SUBSAMPLING) == JPEG_420_SUBSAMPLING) || \
+                                                ((SUBSAMPLING) == JPEG_422_SUBSAMPLING))
+
+#define IS_JPEG_IMAGE_QUALITY(NUMBER) (((NUMBER) >= JPEG_IMAGE_QUALITY_MIN) && ((NUMBER) <= JPEG_IMAGE_QUALITY_MAX))
+
+#define IS_JPEG_COLORSPACE(COLORSPACE) (((COLORSPACE) == JPEG_GRAYSCALE_COLORSPACE) || \
+                                        ((COLORSPACE) == JPEG_YCBCR_COLORSPACE)     || \
+                                        ((COLORSPACE) == JPEG_CMYK_COLORSPACE))
+
+#define IS_JPEG_PAUSE_RESUME_STATE(VALUE) (((VALUE) == JPEG_PAUSE_RESUME_INPUT) || \
+                                           ((VALUE) == JPEG_PAUSE_RESUME_OUTPUT)|| \
+                                           ((VALUE) == JPEG_PAUSE_RESUME_INPUT_OUTPUT))
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup JPEG_Private_Functions_Prototypes JPEG Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup JPEG_Private_Functions JPEG Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* JPEG */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_JPEG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_lptim.h

@@ -0,0 +1,810 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_lptim.h
+  * @author  MCD Application Team
+  * @brief   Header file of LPTIM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_LPTIM_H
+#define STM32H7xx_HAL_LPTIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+#if defined (LPTIM1) || defined (LPTIM2) || defined (LPTIM3) || defined (LPTIM4) || defined (LPTIM5)
+
+/** @addtogroup LPTIM
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Types LPTIM Exported Types
+  * @{
+  */
+
+/**
+  * @brief  LPTIM Clock configuration definition
+  */
+typedef struct
+{
+  uint32_t Source;         /*!< Selects the clock source.
+                           This parameter can be a value of @ref LPTIM_Clock_Source   */
+
+  uint32_t Prescaler;      /*!< Specifies the counter clock Prescaler.
+                           This parameter can be a value of @ref LPTIM_Clock_Prescaler */
+
+} LPTIM_ClockConfigTypeDef;
+
+/**
+  * @brief  LPTIM Clock configuration definition
+  */
+typedef struct
+{
+  uint32_t Polarity;      /*!< Selects the polarity of the active edge for the counter unit
+                           if the ULPTIM input is selected.
+                           Note: This parameter is used only when Ultra low power clock source is used.
+                           Note: If the polarity is configured on 'both edges', an auxiliary clock
+                           (one of the Low power oscillator) must be active.
+                           This parameter can be a value of @ref LPTIM_Clock_Polarity */
+
+  uint32_t SampleTime;     /*!< Selects the clock sampling time to configure the clock glitch filter.
+                           Note: This parameter is used only when Ultra low power clock source is used.
+                           This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
+
+} LPTIM_ULPClockConfigTypeDef;
+
+/**
+  * @brief  LPTIM Trigger configuration definition
+  */
+typedef struct
+{
+  uint32_t Source;        /*!< Selects the Trigger source.
+                          This parameter can be a value of @ref LPTIM_Trigger_Source */
+
+  uint32_t ActiveEdge;    /*!< Selects the Trigger active edge.
+                          Note: This parameter is used only when an external trigger is used.
+                          This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
+
+  uint32_t SampleTime;    /*!< Selects the trigger sampling time to configure the clock glitch filter.
+                          Note: This parameter is used only when an external trigger is used.
+                          This parameter can be a value of @ref LPTIM_Trigger_Sample_Time  */
+} LPTIM_TriggerConfigTypeDef;
+
+/**
+  * @brief  LPTIM Initialization Structure definition
+  */
+typedef struct
+{
+  LPTIM_ClockConfigTypeDef     Clock;               /*!< Specifies the clock parameters */
+
+  LPTIM_ULPClockConfigTypeDef  UltraLowPowerClock;  /*!< Specifies the Ultra Low Power clock parameters */
+
+  LPTIM_TriggerConfigTypeDef   Trigger;             /*!< Specifies the Trigger parameters */
+
+  uint32_t                     OutputPolarity;      /*!< Specifies the Output polarity.
+                                                    This parameter can be a value of @ref LPTIM_Output_Polarity */
+
+  uint32_t                     UpdateMode;          /*!< Specifies whether the update of the autoreload and the compare
+                                                    values is done immediately or after the end of current period.
+                                                    This parameter can be a value of @ref LPTIM_Updating_Mode */
+
+  uint32_t                     CounterSource;       /*!< Specifies whether the counter is incremented each internal event
+                                                    or each external event.
+                                                    This parameter can be a value of @ref LPTIM_Counter_Source */
+
+  uint32_t                     Input1Source;        /*!< Specifies source selected for input1 (GPIO or comparator output).
+                                                    This parameter can be a value of @ref LPTIM_Input1_Source */
+
+  uint32_t                     Input2Source;        /*!< Specifies source selected for input2 (GPIO or comparator output).
+                                                    Note: This parameter is used only for encoder feature so is used only
+                                                    for LPTIM1 instance.
+                                                    This parameter can be a value of @ref LPTIM_Input2_Source */
+} LPTIM_InitTypeDef;
+
+/**
+  * @brief  HAL LPTIM State structure definition
+  */
+typedef enum
+{
+  HAL_LPTIM_STATE_RESET            = 0x00U,    /*!< Peripheral not yet initialized or disabled  */
+  HAL_LPTIM_STATE_READY            = 0x01U,    /*!< Peripheral Initialized and ready for use    */
+  HAL_LPTIM_STATE_BUSY             = 0x02U,    /*!< An internal process is ongoing              */
+  HAL_LPTIM_STATE_TIMEOUT          = 0x03U,    /*!< Timeout state                               */
+  HAL_LPTIM_STATE_ERROR            = 0x04U     /*!< Internal Process is ongoing                 */
+} HAL_LPTIM_StateTypeDef;
+
+/**
+  * @brief  LPTIM handle Structure definition
+  */
+#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
+typedef struct __LPTIM_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
+{
+  LPTIM_TypeDef                 *Instance;         /*!< Register base address     */
+
+  LPTIM_InitTypeDef              Init;             /*!< LPTIM required parameters */
+
+  HAL_StatusTypeDef              Status;           /*!< LPTIM peripheral status   */
+
+  HAL_LockTypeDef                Lock;             /*!< LPTIM locking object      */
+
+  __IO  HAL_LPTIM_StateTypeDef   State;            /*!< LPTIM peripheral state    */
+
+#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
+  void (* MspInitCallback)(struct __LPTIM_HandleTypeDef *hlptim);            /*!< LPTIM Base Msp Init Callback                 */
+  void (* MspDeInitCallback)(struct __LPTIM_HandleTypeDef *hlptim);          /*!< LPTIM Base Msp DeInit Callback               */
+  void (* CompareMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim);       /*!< Compare match Callback                       */
+  void (* AutoReloadMatchCallback)(struct __LPTIM_HandleTypeDef *hlptim);    /*!< Auto-reload match Callback                   */
+  void (* TriggerCallback)(struct __LPTIM_HandleTypeDef *hlptim);            /*!< External trigger event detection Callback    */
+  void (* CompareWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim);       /*!< Compare register write complete Callback     */
+  void (* AutoReloadWriteCallback)(struct __LPTIM_HandleTypeDef *hlptim);    /*!< Auto-reload register write complete Callback */
+  void (* DirectionUpCallback)(struct __LPTIM_HandleTypeDef *hlptim);        /*!< Up-counting direction change Callback        */
+  void (* DirectionDownCallback)(struct __LPTIM_HandleTypeDef *hlptim);      /*!< Down-counting direction change Callback      */
+#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
+} LPTIM_HandleTypeDef;
+
+#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL LPTIM Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_LPTIM_MSPINIT_CB_ID          = 0x00U,    /*!< LPTIM Base Msp Init Callback ID                  */
+  HAL_LPTIM_MSPDEINIT_CB_ID        = 0x01U,    /*!< LPTIM Base Msp DeInit Callback ID                */
+  HAL_LPTIM_COMPARE_MATCH_CB_ID    = 0x02U,    /*!< Compare match Callback ID                        */
+  HAL_LPTIM_AUTORELOAD_MATCH_CB_ID = 0x03U,    /*!< Auto-reload match Callback ID                    */
+  HAL_LPTIM_TRIGGER_CB_ID          = 0x04U,    /*!< External trigger event detection Callback ID     */
+  HAL_LPTIM_COMPARE_WRITE_CB_ID    = 0x05U,    /*!< Compare register write complete Callback ID      */
+  HAL_LPTIM_AUTORELOAD_WRITE_CB_ID = 0x06U,    /*!< Auto-reload register write complete Callback ID  */
+  HAL_LPTIM_DIRECTION_UP_CB_ID     = 0x07U,    /*!< Up-counting direction change Callback ID         */
+  HAL_LPTIM_DIRECTION_DOWN_CB_ID   = 0x08U,    /*!< Down-counting direction change Callback ID       */
+} HAL_LPTIM_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL TIM Callback pointer definition
+  */
+typedef  void (*pLPTIM_CallbackTypeDef)(LPTIM_HandleTypeDef *hlptim);  /*!< pointer to the LPTIM callback function */
+
+#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants
+  * @{
+  */
+
+/** @defgroup LPTIM_Clock_Source LPTIM Clock Source
+  * @{
+  */
+#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC        0x00000000U
+#define LPTIM_CLOCKSOURCE_ULPTIM                LPTIM_CFGR_CKSEL
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler
+  * @{
+  */
+#define LPTIM_PRESCALER_DIV1                    0x00000000U
+#define LPTIM_PRESCALER_DIV2                    LPTIM_CFGR_PRESC_0
+#define LPTIM_PRESCALER_DIV4                    LPTIM_CFGR_PRESC_1
+#define LPTIM_PRESCALER_DIV8                    (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1)
+#define LPTIM_PRESCALER_DIV16                   LPTIM_CFGR_PRESC_2
+#define LPTIM_PRESCALER_DIV32                   (LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2)
+#define LPTIM_PRESCALER_DIV64                   (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2)
+#define LPTIM_PRESCALER_DIV128                  LPTIM_CFGR_PRESC
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity
+  * @{
+  */
+
+#define LPTIM_OUTPUTPOLARITY_HIGH               0x00000000U
+#define LPTIM_OUTPUTPOLARITY_LOW                LPTIM_CFGR_WAVPOL
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time
+  * @{
+  */
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION  0x00000000U
+#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS      LPTIM_CFGR_CKFLT_0
+#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS      LPTIM_CFGR_CKFLT_1
+#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS      LPTIM_CFGR_CKFLT
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity
+  * @{
+  */
+#define LPTIM_CLOCKPOLARITY_RISING              0x00000000U
+#define LPTIM_CLOCKPOLARITY_FALLING             LPTIM_CFGR_CKPOL_0
+#define LPTIM_CLOCKPOLARITY_RISING_FALLING      LPTIM_CFGR_CKPOL_1
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source
+  * @{
+  */
+#define LPTIM_TRIGSOURCE_SOFTWARE               0x0000FFFFU
+#define LPTIM_TRIGSOURCE_0                      0x00000000U
+#define LPTIM_TRIGSOURCE_1                      LPTIM_CFGR_TRIGSEL_0
+#define LPTIM_TRIGSOURCE_2                      LPTIM_CFGR_TRIGSEL_1
+#define LPTIM_TRIGSOURCE_3                      (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)
+#define LPTIM_TRIGSOURCE_4                      LPTIM_CFGR_TRIGSEL_2
+#define LPTIM_TRIGSOURCE_5                      (LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)
+#define LPTIM_TRIGSOURCE_6                      (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_2)
+#define LPTIM_TRIGSOURCE_7                      LPTIM_CFGR_TRIGSEL
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity
+  * @{
+  */
+#define LPTIM_ACTIVEEDGE_RISING                LPTIM_CFGR_TRIGEN_0
+#define LPTIM_ACTIVEEDGE_FALLING               LPTIM_CFGR_TRIGEN_1
+#define LPTIM_ACTIVEEDGE_RISING_FALLING        LPTIM_CFGR_TRIGEN
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time
+  * @{
+  */
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION  0x00000000U
+#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS      LPTIM_CFGR_TRGFLT_0
+#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS      LPTIM_CFGR_TRGFLT_1
+#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS      LPTIM_CFGR_TRGFLT
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode
+  * @{
+  */
+
+#define LPTIM_UPDATE_IMMEDIATE                  0x00000000U
+#define LPTIM_UPDATE_ENDOFPERIOD                LPTIM_CFGR_PRELOAD
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Counter_Source LPTIM Counter Source
+  * @{
+  */
+
+#define LPTIM_COUNTERSOURCE_INTERNAL            0x00000000U
+#define LPTIM_COUNTERSOURCE_EXTERNAL            LPTIM_CFGR_COUNTMODE
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Input1_Source LPTIM Input1 Source
+  * @{
+  */
+
+#define LPTIM_INPUT1SOURCE_GPIO          0x00000000U                                   /*!< For LPTIM1 and LPTIM2 */
+#define LPTIM_INPUT1SOURCE_COMP1         LPTIM_CFGR2_IN1SEL_0                          /*!< For LPTIM1 and LPTIM2 */
+#define LPTIM_INPUT1SOURCE_COMP2         LPTIM_CFGR2_IN1SEL_1                          /*!< For LPTIM2 */
+#define LPTIM_INPUT1SOURCE_COMP1_COMP2   (LPTIM_CFGR2_IN1SEL_1 | LPTIM_CFGR2_IN1SEL_0) /*!< For LPTIM2 */
+#define LPTIM_INPUT1SOURCE_NOT_CONNECTED 0x00000000U                                   /*!< For LPTIM3 */
+#define LPTIM_INPUT1SOURCE_SAI4_FSA      LPTIM_CFGR2_IN1SEL_0                          /*!< For LPTIM3 */
+#define LPTIM_INPUT1SOURCE_SAI4_FSB      LPTIM_CFGR2_IN1SEL_1                          /*!< For LPTIM3 */
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Input2_Source LPTIM Input2 Source
+  * @{
+  */
+
+#define LPTIM_INPUT2SOURCE_GPIO         0x00000000U                    /*!< For LPTIM1 */
+#define LPTIM_INPUT2SOURCE_COMP2        LPTIM_CFGR2_IN2SEL_0           /*!< For LPTIM1 */
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Flag_Definition LPTIM Flags Definition
+  * @{
+  */
+
+#define LPTIM_FLAG_DOWN                          LPTIM_ISR_DOWN
+#define LPTIM_FLAG_UP                            LPTIM_ISR_UP
+#define LPTIM_FLAG_ARROK                         LPTIM_ISR_ARROK
+#define LPTIM_FLAG_CMPOK                         LPTIM_ISR_CMPOK
+#define LPTIM_FLAG_EXTTRIG                       LPTIM_ISR_EXTTRIG
+#define LPTIM_FLAG_ARRM                          LPTIM_ISR_ARRM
+#define LPTIM_FLAG_CMPM                          LPTIM_ISR_CMPM
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition
+  * @{
+  */
+#define LPTIM_IT_DOWN                            LPTIM_IER_DOWNIE
+#define LPTIM_IT_UP                              LPTIM_IER_UPIE
+#define LPTIM_IT_ARROK                           LPTIM_IER_ARROKIE
+#define LPTIM_IT_CMPOK                           LPTIM_IER_CMPOKIE
+#define LPTIM_IT_EXTTRIG                         LPTIM_IER_EXTTRIGIE
+#define LPTIM_IT_ARRM                            LPTIM_IER_ARRMIE
+#define LPTIM_IT_CMPM                            LPTIM_IER_CMPMIE
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
+  * @{
+  */
+
+/** @brief Reset LPTIM handle state.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) do {                                                        \
+                                                      (__HANDLE__)->State             = HAL_LPTIM_STATE_RESET; \
+                                                      (__HANDLE__)->MspInitCallback   = NULL;                  \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;                  \
+                                                     } while(0)
+#else
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
+#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the LPTIM peripheral.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
+
+/**
+  * @brief  Disable the LPTIM peripheral.
+  * @param  __HANDLE__ LPTIM handle
+  * @note   The following sequence is required to solve LPTIM disable HW limitation.
+  *         Please check Errata Sheet ES0335 for more details under "MCU may remain
+  *         stuck in LPTIM interrupt when entering Stop mode" section.
+  * @note   Please call @ref HAL_LPTIM_GetState() after a call to __HAL_LPTIM_DISABLE to
+  *         check for TIMEOUT.
+  * @retval None
+  */
+#define __HAL_LPTIM_DISABLE(__HANDLE__)   LPTIM_Disable(__HANDLE__)
+
+/**
+  * @brief  Start the LPTIM peripheral in Continuous mode.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  LPTIM_CR_CNTSTRT)
+/**
+  * @brief  Start the LPTIM peripheral in single mode.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_START_SINGLE(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  LPTIM_CR_SNGSTRT)
+
+/**
+  * @brief  Reset the LPTIM Counter register in synchronous mode.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_RESET_COUNTER(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  LPTIM_CR_COUNTRST)
+
+/**
+  * @brief  Reset after read of the LPTIM Counter register in asynchronous mode.
+  * @param  __HANDLE__ LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_RESET_COUNTER_AFTERREAD(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  LPTIM_CR_RSTARE)
+
+/**
+  * @brief  Write the passed parameter in the Autoreload register.
+  * @param  __HANDLE__ LPTIM handle
+  * @param  __VALUE__ Autoreload value
+  * @retval None
+  * @note   The ARR register can only be modified when the LPTIM instance is enabled.
+  */
+#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__)  ((__HANDLE__)->Instance->ARR =  (__VALUE__))
+
+/**
+  * @brief  Write the passed parameter in the Compare register.
+  * @param  __HANDLE__ LPTIM handle
+  * @param  __VALUE__ Compare value
+  * @retval None
+  * @note   The CMP register can only be modified when the LPTIM instance is enabled.
+  */
+#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__)     ((__HANDLE__)->Instance->CMP =  (__VALUE__))
+
+/**
+  * @brief  Check whether the specified LPTIM flag is set or not.
+  * @param  __HANDLE__ LPTIM handle
+  * @param  __FLAG__ LPTIM flag to check
+  *            This parameter can be a value of:
+  *            @arg LPTIM_FLAG_DOWN    : Counter direction change up Flag.
+  *            @arg LPTIM_FLAG_UP      : Counter direction change down to up Flag.
+  *            @arg LPTIM_FLAG_ARROK   : Autoreload register update OK Flag.
+  *            @arg LPTIM_FLAG_CMPOK   : Compare register update OK Flag.
+  *            @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+  *            @arg LPTIM_FLAG_ARRM    : Autoreload match Flag.
+  *            @arg LPTIM_FLAG_CMPM    : Compare match Flag.
+  * @retval The state of the specified flag (SET or RESET).
+  */
+#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear the specified LPTIM flag.
+  * @param  __HANDLE__ LPTIM handle.
+  * @param  __FLAG__ LPTIM flag to clear.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_FLAG_DOWN    : Counter direction change up Flag.
+  *            @arg LPTIM_FLAG_UP      : Counter direction change down to up Flag.
+  *            @arg LPTIM_FLAG_ARROK   : Autoreload register update OK Flag.
+  *            @arg LPTIM_FLAG_CMPOK   : Compare register update OK Flag.
+  *            @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+  *            @arg LPTIM_FLAG_ARRM    : Autoreload match Flag.
+  *            @arg LPTIM_FLAG_CMPM    : Compare match Flag.
+  * @retval None.
+  */
+#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->ICR  = (__FLAG__))
+
+/**
+  * @brief  Enable the specified LPTIM interrupt.
+  * @param  __HANDLE__ LPTIM handle.
+  * @param  __INTERRUPT__ LPTIM interrupt to set.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval None.
+  * @note   The LPTIM interrupts can only be enabled when the LPTIM instance is disabled.
+  */
+#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->IER  |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified LPTIM interrupt.
+  * @param  __HANDLE__ LPTIM handle.
+  * @param  __INTERRUPT__ LPTIM interrupt to set.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval None.
+  * @note   The LPTIM interrupts can only be disabled when the LPTIM instance is disabled.
+  */
+#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->IER  &= (~(__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified LPTIM interrupt source is enabled or not.
+  * @param  __HANDLE__ LPTIM handle.
+  * @param  __INTERRUPT__ LPTIM interrupt to check.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval Interrupt status.
+  */
+
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+  * @{
+  */
+
+/** @addtogroup LPTIM_Exported_Functions_Group1
+ *  @brief    Initialization and Configuration functions.
+ * @{
+ */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* MSP functions  *************************************************************/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
+/**
+  * @}
+  */
+
+/** @addtogroup LPTIM_Exported_Functions_Group2
+ *  @brief   Start-Stop operation functions.
+ * @{
+ */
+/* Start/Stop operation functions  *********************************************/
+/* ################################# PWM Mode ################################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# One Pulse Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Set once Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################### Encoder Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# Time out  Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Counter Mode ###############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+/**
+  * @}
+  */
+
+/** @addtogroup LPTIM_Exported_Functions_Group3
+ *  @brief  Read operation functions.
+ * @{
+ */
+/* Reading operation functions ************************************************/
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
+/**
+  * @}
+  */
+
+/** @addtogroup LPTIM_Exported_Functions_Group4
+ *  @brief  LPTIM IRQ handler and callback functions.
+ * @{
+ */
+/* LPTIM IRQ functions  *******************************************************/
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
+
+/* CallBack functions  ********************************************************/
+void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_LPTIM_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_LPTIM_RegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID, pLPTIM_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_LPTIM_UnRegisterCallback(LPTIM_HandleTypeDef *lphtim, HAL_LPTIM_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_LPTIM_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup LPTIM_Group5
+ *  @brief   Peripheral State functions.
+ * @{
+ */
+/* Peripheral State functions  ************************************************/
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Variables LPTIM Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Constants LPTIM Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Macros LPTIM Private Macros
+  * @{
+  */
+
+#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__)       (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
+                                                 ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
+
+
+#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) ==  LPTIM_PRESCALER_DIV1  ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV2  ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV4  ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV8  ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV16 ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV32 ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV64 ) || \
+                                                 ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV128))
+
+#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV1)
+
+#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__)  (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
+                                                 ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
+
+#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
+                                                    ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS)     || \
+                                                    ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS)     || \
+                                                    ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
+
+#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__)   (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING)  || \
+                                                 ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
+                                                 ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
+
+#define IS_LPTIM_TRG_SOURCE(__TRIG__)           (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_5) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_6) || \
+                                                 ((__TRIG__) == LPTIM_TRIGSOURCE_7))
+
+#define IS_LPTIM_EXT_TRG_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING         ) || \
+                                                 ((__POLARITY__) == LPTIM_ACTIVEEDGE_FALLING        ) || \
+                                                 ((__POLARITY__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
+
+#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \
+                                                   ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS    ) || \
+                                                   ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS    ) || \
+                                                   ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS    ))
+
+#define IS_LPTIM_UPDATE_MODE(__MODE__)          (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
+                                                 ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
+
+#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__)     (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
+                                                 ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
+
+#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__)     ((__AUTORELOAD__) <= 0x0000FFFFUL)
+
+#define IS_LPTIM_COMPARE(__COMPARE__)           ((__COMPARE__) <= 0x0000FFFFUL)
+
+#define IS_LPTIM_PERIOD(__PERIOD__)             ((__PERIOD__) <= 0x0000FFFFUL)
+
+#define IS_LPTIM_PULSE(__PULSE__)               ((__PULSE__) <= 0x0000FFFFUL)
+
+#define IS_LPTIM_INPUT1_SOURCE(__INSTANCE__, __SOURCE__)     \
+    ((((__INSTANCE__) == LPTIM1) &&                          \
+     (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) ||           \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1)))           \
+     ||                                                      \
+     (((__INSTANCE__) == LPTIM2) &&                          \
+     (((__SOURCE__) == LPTIM_INPUT1SOURCE_GPIO) ||           \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1) ||          \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP2) ||          \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_COMP1_COMP2)))     \
+     ||                                                      \
+     (((__INSTANCE__) == LPTIM3) &&                          \
+     (((__SOURCE__) == LPTIM_INPUT1SOURCE_NOT_CONNECTED) ||  \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_SAI4_FSA) ||       \
+      ((__SOURCE__) == LPTIM_INPUT1SOURCE_SAI4_FSB))))
+
+#define IS_LPTIM_INPUT2_SOURCE(__INSTANCE__, __SOURCE__)  \
+     ((((__INSTANCE__) == LPTIM1) ||                      \
+       ((__INSTANCE__) == LPTIM2)) &&                     \
+     (((__SOURCE__) == LPTIM_INPUT2SOURCE_GPIO) ||        \
+      ((__SOURCE__) == LPTIM_INPUT2SOURCE_COMP2)))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Functions LPTIM Private Functions
+  * @{
+  */
+void LPTIM_Disable(LPTIM_HandleTypeDef *hlptim);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* LPTIM1 || LPTIM2 ||  LPTIM3 || LPTIM4 || LPTIM5 */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc.h

@@ -0,0 +1,688 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_ltdc.h
+  * @author  MCD Application Team
+  * @brief   Header file of LTDC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_LTDC_H
+#define STM32H7xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (LTDC)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup LTDC LTDC
+  * @brief LTDC HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+  * @{
+  */
+#define MAX_LAYER  2U
+
+/**
+  * @brief  LTDC color structure definition
+  */
+typedef struct
+{
+  uint8_t Blue;                    /*!< Configures the blue value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Green;                   /*!< Configures the green value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Red;                     /*!< Configures the red value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Reserved;                /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+  * @brief  LTDC Init structure definition
+  */
+typedef struct
+{
+  uint32_t            HSPolarity;                /*!< configures the horizontal synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+  uint32_t            VSPolarity;                /*!< configures the vertical synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+  uint32_t            DEPolarity;                /*!< configures the data enable polarity.
+                                                      This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+  uint32_t            PCPolarity;                /*!< configures the pixel clock polarity.
+                                                      This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+  uint32_t            HorizontalSync;            /*!< configures the number of Horizontal synchronization width.
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t            VerticalSync;              /*!< configures the number of Vertical synchronization height.
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedHBP;            /*!< configures the accumulated horizontal back porch width.
+                                                      This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedVBP;            /*!< configures the accumulated vertical back porch height.
+                                                      This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedActiveW;        /*!< configures the accumulated active width.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedActiveH;        /*!< configures the accumulated active height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+  uint32_t            TotalWidth;                /*!< configures the total width.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+  uint32_t            TotalHeigh;                /*!< configures the total height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;                 /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/**
+  * @brief  LTDC Layer structure definition
+  */
+typedef struct
+{
+  uint32_t WindowX0;                   /*!< Configures the Window Horizontal Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowX1;                   /*!< Configures the Window Horizontal Stop Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowY0;                   /*!< Configures the Window vertical Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  uint32_t WindowY1;                   /*!< Configures the Window vertical Stop Position.
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FF. */
+
+  uint32_t PixelFormat;                /*!< Specifies the pixel format.
+                                            This parameter can be one of value of @ref LTDC_Pixelformat */
+
+  uint32_t Alpha;                      /*!< Specifies the constant alpha used for blending.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Alpha0;                     /*!< Configures the default alpha value.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t BlendingFactor1;            /*!< Select the blending factor 1.
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+  uint32_t BlendingFactor2;            /*!< Select the blending factor 2.
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+  uint32_t FBStartAdress;              /*!< Configures the color frame buffer address */
+
+  uint32_t ImageWidth;                 /*!< Configures the color frame buffer line length.
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+  uint32_t ImageHeight;                /*!< Specifies the number of line in frame buffer.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;       /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+  * @brief  HAL LTDC State structures definition
+  */
+typedef enum
+{
+  HAL_LTDC_STATE_RESET             = 0x00U,    /*!< LTDC not yet initialized or disabled */
+  HAL_LTDC_STATE_READY             = 0x01U,    /*!< LTDC initialized and ready for use   */
+  HAL_LTDC_STATE_BUSY              = 0x02U,    /*!< LTDC internal process is ongoing     */
+  HAL_LTDC_STATE_TIMEOUT           = 0x03U,    /*!< LTDC Timeout state                   */
+  HAL_LTDC_STATE_ERROR             = 0x04U     /*!< LTDC state error                     */
+} HAL_LTDC_StateTypeDef;
+
+/**
+  * @brief  LTDC handle Structure definition
+  */
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+typedef struct __LTDC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
+{
+  LTDC_TypeDef                *Instance;                /*!< LTDC Register base address                */
+
+  LTDC_InitTypeDef            Init;                     /*!< LTDC parameters                           */
+
+  LTDC_LayerCfgTypeDef        LayerCfg[MAX_LAYER];      /*!< LTDC Layers parameters                    */
+
+  HAL_LockTypeDef             Lock;                     /*!< LTDC Lock                                 */
+
+  __IO HAL_LTDC_StateTypeDef  State;                    /*!< LTDC state                                */
+
+  __IO uint32_t               ErrorCode;                /*!< LTDC Error code                           */
+
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+  void (* LineEventCallback)(struct __LTDC_HandleTypeDef *hltdc);     /*!< LTDC Line Event Callback    */
+  void (* ReloadEventCallback)(struct __LTDC_HandleTypeDef *hltdc);   /*!< LTDC Reload Event Callback  */
+  void (* ErrorCallback)(struct __LTDC_HandleTypeDef *hltdc);         /*!< LTDC Error Callback         */
+
+  void (* MspInitCallback)(struct __LTDC_HandleTypeDef *hltdc);       /*!< LTDC Msp Init callback      */
+  void (* MspDeInitCallback)(struct __LTDC_HandleTypeDef *hltdc);     /*!< LTDC Msp DeInit callback    */
+
+#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
+
+
+} LTDC_HandleTypeDef;
+
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL LTDC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_LTDC_MSPINIT_CB_ID            = 0x00U,    /*!< LTDC MspInit callback ID       */
+  HAL_LTDC_MSPDEINIT_CB_ID          = 0x01U,    /*!< LTDC MspDeInit callback ID     */
+
+  HAL_LTDC_LINE_EVENT_CB_ID         = 0x02U,    /*!< LTDC Line Event Callback ID    */
+  HAL_LTDC_RELOAD_EVENT_CB_ID       = 0x03U,    /*!< LTDC Reload Callback ID        */
+  HAL_LTDC_ERROR_CB_ID              = 0x04U     /*!< LTDC Error Callback ID         */
+
+} HAL_LTDC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL LTDC Callback pointer definition
+  */
+typedef  void (*pLTDC_CallbackTypeDef)(LTDC_HandleTypeDef *hltdc);  /*!< pointer to an LTDC callback function */
+
+#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+  * @{
+  */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+  * @{
+  */
+#define HAL_LTDC_ERROR_NONE               0x00000000U   /*!< LTDC No error             */
+#define HAL_LTDC_ERROR_TE                 0x00000001U   /*!< LTDC Transfer error       */
+#define HAL_LTDC_ERROR_FU                 0x00000002U   /*!< LTDC FIFO Underrun        */
+#define HAL_LTDC_ERROR_TIMEOUT            0x00000020U   /*!< LTDC Timeout error        */
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+#define  HAL_LTDC_ERROR_INVALID_CALLBACK  0x00000040U   /*!< LTDC Invalid Callback error  */
+#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Layer LTDC Layer
+  * @{
+  */
+#define LTDC_LAYER_1                      0x00000000U   /*!< LTDC Layer 1 */
+#define LTDC_LAYER_2                      0x00000001U   /*!< LTDC Layer 2 */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+  * @{
+  */
+#define LTDC_HSPOLARITY_AL                0x00000000U   /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH                LTDC_GCR_HSPOL            /*!< Horizontal Synchronization is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+  * @{
+  */
+#define LTDC_VSPOLARITY_AL                0x00000000U   /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH                LTDC_GCR_VSPOL            /*!< Vertical Synchronization is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+  * @{
+  */
+#define LTDC_DEPOLARITY_AL                0x00000000U   /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH                LTDC_GCR_DEPOL            /*!< Data Enable, is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+  * @{
+  */
+#define LTDC_PCPOLARITY_IPC               0x00000000U   /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC              LTDC_GCR_PCPOL            /*!< inverted input pixel clock. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+  * @{
+  */
+#define LTDC_HORIZONTALSYNC               (LTDC_SSCR_HSW >> 16U)    /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC                 LTDC_SSCR_VSH             /*!< Vertical synchronization height. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+  * @{
+  */
+#define LTDC_COLOR                        0x000000FFU   /*!< Color mask */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR1_CA          0x00000400U   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA       0x00000600U   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR2_CA          0x00000005U   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA       0x00000007U   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+  * @{
+  */
+#define LTDC_PIXEL_FORMAT_ARGB8888        0x00000000U   /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888          0x00000001U   /*!< RGB888 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_RGB565          0x00000002U   /*!< RGB565 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_ARGB1555        0x00000003U   /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444        0x00000004U   /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8              0x00000005U   /*!< L8 LTDC pixel format       */
+#define LTDC_PIXEL_FORMAT_AL44            0x00000006U   /*!< AL44 LTDC pixel format     */
+#define LTDC_PIXEL_FORMAT_AL88            0x00000007U   /*!< AL88 LTDC pixel format     */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+  * @{
+  */
+#define LTDC_ALPHA                        LTDC_LxCACR_CONSTA        /*!< LTDC Constant Alpha mask */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+  * @{
+  */
+#define LTDC_STOPPOSITION                 (LTDC_LxWHPCR_WHSPPOS >> 16U) /*!< LTDC Layer stop position  */
+#define LTDC_STARTPOSITION                LTDC_LxWHPCR_WHSTPOS          /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER           LTDC_LxCFBLR_CFBLL            /*!< LTDC Layer Line length    */
+#define LTDC_LINE_NUMBER                  LTDC_LxCFBLNR_CFBLNBR         /*!< LTDC Layer Line number    */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+  * @{
+  */
+#define LTDC_IT_LI                        LTDC_IER_LIE              /*!< LTDC Line Interrupt            */
+#define LTDC_IT_FU                        LTDC_IER_FUIE             /*!< LTDC FIFO Underrun Interrupt   */
+#define LTDC_IT_TE                        LTDC_IER_TERRIE           /*!< LTDC Transfer Error Interrupt  */
+#define LTDC_IT_RR                        LTDC_IER_RRIE             /*!< LTDC Register Reload Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Flags LTDC Flags
+  * @{
+  */
+#define LTDC_FLAG_LI                      LTDC_ISR_LIF              /*!< LTDC Line Interrupt Flag            */
+#define LTDC_FLAG_FU                      LTDC_ISR_FUIF             /*!< LTDC FIFO Underrun interrupt Flag   */
+#define LTDC_FLAG_TE                      LTDC_ISR_TERRIF           /*!< LTDC Transfer Error interrupt Flag  */
+#define LTDC_FLAG_RR                      LTDC_ISR_RRIF             /*!< LTDC Register Reload interrupt Flag */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Reload_Type LTDC Reload Type
+  * @{
+  */
+#define LTDC_RELOAD_IMMEDIATE             LTDC_SRCR_IMR             /*!< Immediate Reload */
+#define LTDC_RELOAD_VERTICAL_BLANKING     LTDC_SRCR_VBR             /*!< Vertical Blanking Reload */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+  * @{
+  */
+
+/** @brief Reset LTDC handle state.
+  * @param  __HANDLE__  LTDC handle
+  * @retval None
+  */
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) do{                                                  \
+                                                      (__HANDLE__)->State = HAL_LTDC_STATE_RESET;     \
+                                                      (__HANDLE__)->MspInitCallback = NULL;           \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;         \
+                                                    } while(0)
+#else
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+#endif /*USE_HAL_LTDC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable the LTDC.
+  * @param  __HANDLE__  LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+  * @brief  Disable the LTDC.
+  * @param  __HANDLE__  LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+  * @brief  Enable the LTDC Layer.
+  * @param  __HANDLE__  LTDC handle
+  * @param  __LAYER__   Specify the layer to be enabled.
+  *                     This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__)  ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Disable the LTDC Layer.
+  * @param  __HANDLE__  LTDC handle
+  * @param  __LAYER__   Specify the layer to be disabled.
+  *                     This parameter can be LTDC_LAYER_1 (0) or LTDC_LAYER_2 (1).
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Reload immediately all LTDC Layers.
+  * @param  __HANDLE__  LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(__HANDLE__)  ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/**
+  * @brief  Reload during vertical blanking period all LTDC Layers.
+  * @param  __HANDLE__  LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_VERTICAL_BLANKING_RELOAD_CONFIG(__HANDLE__)  ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_VBR)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the LTDC pending flags.
+  * @param  __HANDLE__  LTDC handle
+  * @param  __FLAG__    Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the LTDC pending flags.
+  * @param  __HANDLE__  LTDC handle
+  * @param  __FLAG__    Specify the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified LTDC interrupts.
+  * @param  __HANDLE__  LTDC handle
+  * @param __INTERRUPT__ Specify the LTDC interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified LTDC interrupts.
+  * @param  __HANDLE__  LTDC handle
+  * @param __INTERRUPT__ Specify the LTDC interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified LTDC interrupt has occurred or not.
+  * @param  __HANDLE__  LTDC handle
+  * @param __INTERRUPT__ Specify the LTDC interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval The state of INTERRUPT (SET or RESET).
+  */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+/**
+  * @}
+  */
+
+/* Include LTDC HAL Extension module */
+#include "stm32h7xx_hal_ltdc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+  * @{
+  */
+/** @addtogroup LTDC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_ReloadEventCallback(LTDC_HandleTypeDef *hltdc);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_LTDC_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_LTDC_RegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID, pLTDC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_LTDC_UnRegisterCallback(LTDC_HandleTypeDef *hltdc, HAL_LTDC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_LTDC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void  HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_Reload(LTDC_HandleTypeDef *hltdc, uint32_t ReloadType);
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer_NoReload(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPitch_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LinePitchInPixels, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT_NoReload(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t              HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+  * @{
+  */
+#define LTDC_LAYER(__HANDLE__, __LAYER__)              ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84U + (0x80U*(__LAYER__)))))
+#define IS_LTDC_LAYER(__LAYER__)                       ((__LAYER__) < MAX_LAYER)
+#define IS_LTDC_HSPOL(__HSPOL__)                       (((__HSPOL__) == LTDC_HSPOLARITY_AL) || ((__HSPOL__) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(__VSPOL__)                       (((__VSPOL__) == LTDC_VSPOLARITY_AL) || ((__VSPOL__) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(__DEPOL__)                       (((__DEPOL__) == LTDC_DEPOLARITY_AL) || ((__DEPOL__) ==  LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(__PCPOL__)                       (((__PCPOL__) == LTDC_PCPOLARITY_IPC) || ((__PCPOL__) ==  LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(__HSYNC__)                       ((__HSYNC__)  <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(__VSYNC__)                       ((__VSYNC__)  <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(__AHBP__)                         ((__AHBP__)   <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(__AVBP__)                         ((__AVBP__)   <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(__AAW__)                           ((__AAW__)    <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(__AAH__)                           ((__AAH__)    <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(__TOTALW__)                     ((__TOTALW__) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(__TOTALH__)                     ((__TOTALH__) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(__BBLUE__)                   ((__BBLUE__)  <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(__BGREEN__)                 ((__BGREEN__) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(__BRED__)                     ((__BRED__)   <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_CA) || \
+                                                        ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(__BLENDING_FACTOR1__) (((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_CA) || \
+                                                        ((__BLENDING_FACTOR1__) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(__PIXEL_FORMAT__)         (((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB8888) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB888)   || \
+                                                        ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_RGB565)   || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+                                                        ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_ARGB4444) || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_L8)       || \
+                                                        ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL44)     || ((__PIXEL_FORMAT__) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(__ALPHA__)                       ((__ALPHA__) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(__HCONFIGST__)               ((__HCONFIGST__) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(__HCONFIGSP__)               ((__HCONFIGSP__) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(__VCONFIGST__)               ((__VCONFIGST__) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(__VCONFIGSP__)               ((__VCONFIGSP__) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(__CFBP__)                         ((__CFBP__) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(__CFBLL__)                       ((__CFBLL__) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(__CFBLNBR__)                   ((__CFBLNBR__) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(__LIPOS__)                       ((__LIPOS__) <= 0x7FFU)
+#define IS_LTDC_RELOAD(__RELOADTYPE__)                 (((__RELOADTYPE__) == LTDC_RELOAD_IMMEDIATE) || ((__RELOADTYPE__) == LTDC_RELOAD_VERTICAL_BLANKING))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* LTDC */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_ltdc_ex.h

@@ -0,0 +1,86 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_ltdc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of LTDC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_LTDC_EX_H
+#define STM32H7xx_HAL_LTDC_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (LTDC) && defined (DSI)
+
+#include "stm32h7xx_hal_dsi.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup LTDCEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup LTDCEx_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_LTDCEx_StructInitFromVideoConfig(LTDC_HandleTypeDef *hltdc, DSI_VidCfgTypeDef *VidCfg);
+HAL_StatusTypeDef HAL_LTDCEx_StructInitFromAdaptedCommandConfig(LTDC_HandleTypeDef *hltdc, DSI_CmdCfgTypeDef *CmdCfg);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* LTDC && DSI */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_LTDC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdios.h

@@ -0,0 +1,610 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_mdios.h
+  * @author  MCD Application Team
+  * @brief   Header file of MDIOS HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_MDIOS_H
+#define STM32H7xx_HAL_MDIOS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (MDIOS)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MDIOS
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup MDIOS_Exported_Types MDIOS Exported Types
+  * @{
+  */
+
+/** @defgroup MDIOS_Exported_Types_Group1 MDIOS State structures definition
+  * @{
+  */
+
+typedef enum
+{
+  HAL_MDIOS_STATE_RESET             = 0x00U,    /*!< Peripheral not yet Initialized or disabled         */
+  HAL_MDIOS_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use           */
+  HAL_MDIOS_STATE_BUSY              = 0x02U,    /*!< an internal process is ongoing                     */
+  HAL_MDIOS_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                       */
+}HAL_MDIOS_StateTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Exported_Types_Group2 MDIOS Init Structure definition
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t PortAddress;           /*!< Specifies the MDIOS port address.
+                                       This parameter can be a value from 0 to 31 */
+  uint32_t PreambleCheck;         /*!< Specifies whether the preamble check is enabled or disabled.
+                                       This parameter can be a value of @ref MDIOS_Preamble_Check */
+}MDIOS_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Exported_Types_Group4 MDIOS handle Structure definition
+  * @{
+  */
+
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+typedef struct __MDIOS_HandleTypeDef
+#else
+typedef struct
+#endif
+{
+  MDIOS_TypeDef                *Instance;     /*!< Register base address       */
+
+  MDIOS_InitTypeDef            Init;          /*!< MDIOS Init Structure        */
+
+  __IO HAL_MDIOS_StateTypeDef  State;         /*!< MDIOS communication state
+                                                   This parameter can be a value of of @ref HAL_MDIOS_StateTypeDef */
+
+  __IO uint32_t                ErrorCode;     /*!< Holds the global Error code of the MDIOS HAL status machine
+                                                   This parameter can be a value of of @ref MDIOS_Error_Code */
+
+  HAL_LockTypeDef              Lock;          /*!< MDIOS Lock                  */
+
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+
+  void    (* WriteCpltCallback)  ( struct __MDIOS_HandleTypeDef * hmdios);   /*!< MDIOS Write Complete Callback */
+  void    (* ReadCpltCallback)   ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Read  Complete Callback     */
+  void    (* ErrorCallback)      ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Error Callback   */
+  void    (* WakeUpCallback)     ( struct __MDIOS_HandleTypeDef * hmdios);  /*!< MDIOS Wake UP Callback   */
+
+  void    (* MspInitCallback)    ( struct __MDIOS_HandleTypeDef * hmdios);    /*!< MDIOS Msp Init callback              */
+  void    (* MspDeInitCallback)  ( struct __MDIOS_HandleTypeDef * hmdios);    /*!< MDIOS Msp DeInit callback            */
+
+#endif  /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
+}MDIOS_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL MDIOS Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_MDIOS_MSPINIT_CB_ID            = 0x00U,    /*!< MDIOS MspInit callback ID           */
+  HAL_MDIOS_MSPDEINIT_CB_ID          = 0x01U,    /*!< MDIOS MspDeInit callback ID         */
+
+  HAL_MDIOS_WRITE_COMPLETE_CB_ID     = 0x02U,    /*!< MDIOS Write Complete Callback ID       */
+  HAL_MDIOS_READ_COMPLETE_CB_ID      = 0x03U,    /*!< MDIOS Read Complete Callback ID       */
+  HAL_MDIOS_ERROR_CB_ID              = 0x04U,    /*!< MDIOS Error Callback ID         */
+  HAL_MDIOS_WAKEUP_CB_ID             = 0x05U     /*!< MDIOS Wake UP Callback ID           */
+}HAL_MDIOS_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL MDIOS Callback pointer definition
+  */
+typedef  void (*pMDIOS_CallbackTypeDef)(MDIOS_HandleTypeDef * hmdios); /*!< pointer to an MDIOS callback function */
+
+#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup MDIOS_Exported_Constants MDIOS Exported Constants
+  * @{
+  */
+
+/** @defgroup MDIOS_Preamble_Check  MDIOS Preamble Check
+  * @{
+  */
+#define MDIOS_PREAMBLE_CHECK_ENABLE      ((uint32_t)0x00000000U)
+#define MDIOS_PREAMBLE_CHECK_DISABLE     MDIOS_CR_DPC
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Input_Output_Registers_Definitions MDIOS Input Output Registers Definitions
+  * @{
+  */
+#define MDIOS_REG0                      ((uint32_t)0x00000000U)
+#define MDIOS_REG1                      ((uint32_t)0x00000001U)
+#define MDIOS_REG2                      ((uint32_t)0x00000002U)
+#define MDIOS_REG3                      ((uint32_t)0x00000003U)
+#define MDIOS_REG4                      ((uint32_t)0x00000004U)
+#define MDIOS_REG5                      ((uint32_t)0x00000005U)
+#define MDIOS_REG6                      ((uint32_t)0x00000006U)
+#define MDIOS_REG7                      ((uint32_t)0x00000007U)
+#define MDIOS_REG8                      ((uint32_t)0x00000008U)
+#define MDIOS_REG9                      ((uint32_t)0x00000009U)
+#define MDIOS_REG10                     ((uint32_t)0x0000000AU)
+#define MDIOS_REG11                     ((uint32_t)0x0000000BU)
+#define MDIOS_REG12                     ((uint32_t)0x0000000CU)
+#define MDIOS_REG13                     ((uint32_t)0x0000000DU)
+#define MDIOS_REG14                     ((uint32_t)0x0000000EU)
+#define MDIOS_REG15                     ((uint32_t)0x0000000FU)
+#define MDIOS_REG16                     ((uint32_t)0x00000010U)
+#define MDIOS_REG17                     ((uint32_t)0x00000011U)
+#define MDIOS_REG18                     ((uint32_t)0x00000012U)
+#define MDIOS_REG19                     ((uint32_t)0x00000013U)
+#define MDIOS_REG20                     ((uint32_t)0x00000014U)
+#define MDIOS_REG21                     ((uint32_t)0x00000015U)
+#define MDIOS_REG22                     ((uint32_t)0x00000016U)
+#define MDIOS_REG23                     ((uint32_t)0x00000017U)
+#define MDIOS_REG24                     ((uint32_t)0x00000018U)
+#define MDIOS_REG25                     ((uint32_t)0x00000019U)
+#define MDIOS_REG26                     ((uint32_t)0x0000001AU)
+#define MDIOS_REG27                     ((uint32_t)0x0000001BU)
+#define MDIOS_REG28                     ((uint32_t)0x0000001CU)
+#define MDIOS_REG29                     ((uint32_t)0x0000001DU)
+#define MDIOS_REG30                     ((uint32_t)0x0000001EU)
+#define MDIOS_REG31                     ((uint32_t)0x0000001FU)
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Registers_Flags  MDIOS Registers Flags
+  * @{
+  */
+#define MDIOS_REG0_FLAG			((uint32_t)0x00000001U)
+#define	MDIOS_REG1_FLAG			((uint32_t)0x00000002U)
+#define	MDIOS_REG2_FLAG			((uint32_t)0x00000004U)
+#define	MDIOS_REG3_FLAG			((uint32_t)0x00000008U)
+#define	MDIOS_REG4_FLAG			((uint32_t)0x00000010U)
+#define	MDIOS_REG5_FLAG			((uint32_t)0x00000020U)
+#define	MDIOS_REG6_FLAG			((uint32_t)0x00000040U)
+#define	MDIOS_REG7_FLAG			((uint32_t)0x00000080U)
+#define	MDIOS_REG8_FLAG			((uint32_t)0x00000100U)
+#define	MDIOS_REG9_FLAG			((uint32_t)0x00000200U)
+#define	MDIOS_REG10_FLAG		((uint32_t)0x00000400U)
+#define	MDIOS_REG11_FLAG		((uint32_t)0x00000800U)
+#define	MDIOS_REG12_FLAG		((uint32_t)0x00001000U)
+#define	MDIOS_REG13_FLAG		((uint32_t)0x00002000U)
+#define	MDIOS_REG14_FLAG		((uint32_t)0x00004000U)
+#define	MDIOS_REG15_FLAG		((uint32_t)0x00008000U)
+#define	MDIOS_REG16_FLAG		((uint32_t)0x00010000U)
+#define	MDIOS_REG17_FLAG		((uint32_t)0x00020000U)
+#define	MDIOS_REG18_FLAG		((uint32_t)0x00040000U)
+#define	MDIOS_REG19_FLAG		((uint32_t)0x00080000U)
+#define	MDIOS_REG20_FLAG		((uint32_t)0x00100000U)
+#define	MDIOS_REG21_FLAG		((uint32_t)0x00200000U)
+#define	MDIOS_REG22_FLAG		((uint32_t)0x00400000U)
+#define	MDIOS_REG23_FLAG		((uint32_t)0x00800000U)
+#define	MDIOS_REG24_FLAG		((uint32_t)0x01000000U)
+#define	MDIOS_REG25_FLAG		((uint32_t)0x02000000U)
+#define	MDIOS_REG26_FLAG		((uint32_t)0x04000000U)
+#define	MDIOS_REG27_FLAG		((uint32_t)0x08000000U)
+#define	MDIOS_REG28_FLAG		((uint32_t)0x10000000U)
+#define	MDIOS_REG29_FLAG		((uint32_t)0x20000000U)
+#define	MDIOS_REG30_FLAG		((uint32_t)0x40000000U)
+#define	MDIOS_REG31_FLAG		((uint32_t)0x80000000U)
+#define	MDIOS_ALLREG_FLAG		((uint32_t)0xFFFFFFFFU)
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Interrupt_sources Interrupt Sources
+  * @{
+  */
+#define MDIOS_IT_WRITE                   MDIOS_CR_WRIE
+#define MDIOS_IT_READ                    MDIOS_CR_RDIE
+#define MDIOS_IT_ERROR                   MDIOS_CR_EIE
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Interrupt_Flags  MDIOS Interrupt Flags
+  * @{
+  */
+#define	MDIOS_TURNAROUND_ERROR_FLAG       MDIOS_SR_TERF
+#define	MDIOS_START_ERROR_FLAG            MDIOS_SR_SERF
+#define	MDIOS_PREAMBLE_ERROR_FLAG         MDIOS_SR_PERF
+/**
+  * @}
+  */
+
+/** @defgroup MDIOS_Error_Code MDIOS Error Code
+  * @{
+  */
+#define HAL_MDIOS_ERROR_NONE         ((uint32_t)0x00000000U)   /*!< No error            */
+#define HAL_MDIOS_ERROR_PARAM        ((uint32_t)0x00000001U)   /*!< Busy error          */
+#define HAL_MDIOS_ERROR_BUSY         ((uint32_t)0x00000002U)   /*!< Parameter error     */
+#define HAL_MDIOS_ERROR_TIMEOUT      ((uint32_t)0x00000004U)   /*!< Timeout error       */
+#define HAL_MDIOS_ERROR_DATA         ((uint32_t)0x00000010U)   /*!< Data transfer error       */
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+#define HAL_MDIOS_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+ /** @defgroup MDIOS_Wakeup_Line  MDIOS Wakeup Line
+  * @{
+  */
+#define MDIOS_WAKEUP_EXTI_LINE  ((uint32_t)0x00000400)  /* !<  42 - 32 = 10 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup MDIOS_Exported_Macros MDIOS Exported Macros
+  * @{
+  */
+
+/** @brief Reset MDIOS handle state
+  * @param  __HANDLE__: MDIOS handle.
+  * @retval None
+  */
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__)  do{                                                   \
+                                                       (__HANDLE__)->State = HAL_MDIOS_STATE_RESET;      \
+                                                       (__HANDLE__)->MspInitCallback = NULL;             \
+                                                       (__HANDLE__)->MspDeInitCallback = NULL;           \
+                                                     } while(0)
+#else
+#define __HAL_MDIOS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_MDIOS_STATE_RESET)
+#endif /*USE_HAL_MDIOS_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable/Disable the MDIOS peripheral.
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @retval None
+  */
+#define __HAL_MDIOS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= MDIOS_CR_EN)
+#define __HAL_MDIOS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~MDIOS_CR_EN)
+
+
+/**
+  * @brief  Enable the MDIOS device interrupt.
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg MDIOS_IT_WRITE: Register write interrupt
+  *            @arg MDIOS_IT_READ: Register read interrupt
+  *            @arg MDIOS_IT_ERROR: Error interrupt
+  * @retval None
+  */
+#define __HAL_MDIOS_ENABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the MDIOS device interrupt.
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources to be disabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg MDIOS_IT_WRITE: Register write interrupt
+  *            @arg MDIOS_IT_READ: Register read interrupt
+  *            @arg MDIOS_IT_ERROR: Error interrupt
+  * @retval None
+  */
+#define __HAL_MDIOS_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/** @brief Set MDIOS slave get write register flag
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __FLAG__: specifies the write register flag
+  * @retval The state of write flag
+  */
+#define __HAL_MDIOS_GET_WRITE_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->WRFR &  (__FLAG__))
+
+/** @brief MDIOS slave get read register flag
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __FLAG__: specifies the read register flag
+  * @retval The state of read flag
+  */
+#define __HAL_MDIOS_GET_READ_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->RDFR &  (__FLAG__))
+
+/** @brief MDIOS slave get interrupt
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __FLAG__ : specifies the Error flag.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt
+  *            @arg MDIOS_START_ERROR_FLAG: Register read interrupt
+  *            @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt
+  * @retval The state of the error flag
+  */
+#define __HAL_MDIOS_GET_ERROR_FLAG(__HANDLE__, __FLAG__)       ((__HANDLE__)->Instance->SR &  (__FLAG__))
+
+/** @brief  MDIOS slave clear interrupt
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __FLAG__ : specifies the Error flag.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg MDIOS_TURNARROUND_ERROR_FLAG: Register write interrupt
+  *            @arg MDIOS_START_ERROR_FLAG: Register read interrupt
+  *            @arg MDIOS_PREAMBLE_ERROR_FLAG: Error interrupt
+  * @retval none
+  */
+#define __HAL_MDIOS_CLEAR_ERROR_FLAG(__HANDLE__, __FLAG__)       ((__HANDLE__)->Instance->CLRFR) |= (__FLAG__)
+
+/**
+  * @brief  Checks whether the specified MDIOS interrupt is set or not.
+  * @param  __HANDLE__: specifies the MDIOS handle.
+  * @param  __INTERRUPT__ : specifies the MDIOS interrupt sources
+  *            This parameter can be one or a combination of the following values:
+  *            @arg MDIOS_IT_WRITE: Register write interrupt
+  *            @arg MDIOS_IT_READ: Register read interrupt
+  *            @arg MDIOS_IT_ERROR: Error interrupt
+  * @retval The state of the interrupt source
+  */
+#define __HAL_MDIOS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/**
+  * @brief Enable the MDIOS WAKEUP Exti Line.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be enabled.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_IT(__EXTI_LINE__)   (EXTI->IMR2 |= (__EXTI_LINE__))
+
+#if defined(DUAL_CORE)
+/**
+  * @brief Enable the MDIOS WAKEUP Exti Line by Domain2.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be enabled.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTID2_ENABLE_IT(__EXTI_LINE__)   (EXTI->C2IMR2 |= (__EXTI_LINE__))
+
+#endif
+/**
+  * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval EXTI MDIOS WAKEUP Line Status.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_GET_FLAG(__EXTI_LINE__)  (EXTI->PR2 & (__EXTI_LINE__))
+
+#if defined(DUAL_CORE)
+/**
+  * @brief checks whether the specified MDIOS WAKEUP Exti interrupt flag is set or not.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval EXTI MDIOS WAKEUP Line Status.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTID2_GET_FLAG(__EXTI_LINE__)  (EXTI->C2PR2 & (__EXTI_LINE__))
+#endif
+/**
+  * @brief Clear the MDIOS WAKEUP Exti flag.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR2 = (__EXTI_LINE__))
+
+#if defined(DUAL_CORE)
+/**
+  * @brief Clear the MDIOS WAKEUP Exti flag.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP Exti sources to be cleared.
+  * This parameter can be:
+  *   @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None.
+  */
+#define __HAL_MDIOS_WAKEUP_EXTID2_CLEAR_FLAG(__EXTI_LINE__) (EXTI->C2PR2 = (__EXTI_LINE__))
+
+#endif
+/**
+  * @brief  enable rising edge interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_EDGE(__EXTI_LINE__) (EXTI->FTSR2 &= ~(__EXTI_LINE__)); \
+                                                                   (EXTI->RTSR2 |= (__EXTI_LINE__))
+
+/**
+  * @brief  enable falling edge interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 &= ~(__EXTI_LINE__));\
+                                                                 (EXTI->FTSR2 |= (__EXTI_LINE__))
+
+/**
+  * @brief  enable falling edge interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE(__EXTI_LINE__) (EXTI->RTSR2 |= (__EXTI_LINE__));\
+                                                                          (EXTI->FTSR2 |= (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the MDIOS WAKEUP EXTI sources to be disabled.
+  * This parameter can be:
+  *  @arg MDIOS_WAKEUP_EXTI_LINE
+  * @retval None
+  */
+#define __HAL_MDIOS_WAKEUP_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER2 |= (__EXTI_LINE__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MDIOS_Exported_Functions MDIOS Exported Functions
+  * @{
+  */
+
+/** @addtogroup MDIOS_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDIOS_Init(MDIOS_HandleTypeDef *hmdios);
+HAL_StatusTypeDef HAL_MDIOS_DeInit(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_MspInit(MDIOS_HandleTypeDef *hmdios);
+void  HAL_MDIOS_MspDeInit(MDIOS_HandleTypeDef *hmdios);
+
+/* Callbacks Register/UnRegister functions  ***********************************/
+#if (USE_HAL_MDIOS_REGISTER_CALLBACKS == 1)
+HAL_StatusTypeDef HAL_MDIOS_RegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID, pMDIOS_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_MDIOS_UnRegisterCallback(MDIOS_HandleTypeDef *hmdios, HAL_MDIOS_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_MDIOS_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @addtogroup MDIOS_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDIOS_WriteReg(MDIOS_HandleTypeDef *hmdios,  uint32_t RegNum, uint16_t Data);
+HAL_StatusTypeDef HAL_MDIOS_ReadReg(MDIOS_HandleTypeDef *hmdios,  uint32_t RegNum, uint16_t *pData);
+
+uint32_t HAL_MDIOS_GetWrittenRegAddress(MDIOS_HandleTypeDef *hmdios);
+uint32_t HAL_MDIOS_GetReadRegAddress(MDIOS_HandleTypeDef *hmdios);
+HAL_StatusTypeDef HAL_MDIOS_ClearWriteRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum);
+HAL_StatusTypeDef HAL_MDIOS_ClearReadRegAddress(MDIOS_HandleTypeDef *hmdios, uint32_t RegNum);
+
+HAL_StatusTypeDef HAL_MDIOS_EnableEvents(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_IRQHandler(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_WriteCpltCallback(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_ReadCpltCallback(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_ErrorCallback(MDIOS_HandleTypeDef *hmdios);
+void HAL_MDIOS_WakeUpCallback(MDIOS_HandleTypeDef *hmdios);
+/**
+  * @}
+  */
+
+/** @addtogroup MDIOS_Exported_Functions_Group3
+  * @{
+  */
+uint32_t HAL_MDIOS_GetError(MDIOS_HandleTypeDef *hmdios);
+HAL_MDIOS_StateTypeDef HAL_MDIOS_GetState(MDIOS_HandleTypeDef *hmdios);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MDIOS_Private_Types MDIOS Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MDIOS_Private_Variables MDIOS Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MDIOS_Private_Constants MDIOS Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MDIOS_Private_Macros MDIOS Private Macros
+  * @{
+  */
+
+#define IS_MDIOS_PORTADDRESS(__ADDR__) ((__ADDR__) < 32U)
+
+#define IS_MDIOS_REGISTER(__REGISTER__) ((__REGISTER__) < 32U)
+
+#define IS_MDIOS_PREAMBLECHECK(__PREAMBLECHECK__) (((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_ENABLE) || \
+                                                   ((__PREAMBLECHECK__) == MDIOS_PREAMBLE_CHECK_DISABLE))
+
+ /**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MDIOS_Private_Functions MDIOS Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* MDIOS */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_MDIOS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h

@@ -0,0 +1,870 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_mdma.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_MDMA_H
+#define STM32H7xx_HAL_MDMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MDMA
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Types MDMA Exported Types
+  * @brief    MDMA Exported Types
+  * @{
+  */
+
+/**
+  * @brief  MDMA Configuration Structure definition
+  */
+typedef struct
+{
+
+  uint32_t Request;                 /*!< Specifies the MDMA request.
+                                        This parameter can be a value of @ref MDMA_Request_selection*/
+
+  uint32_t TransferTriggerMode;     /*!< Specifies the Trigger Transfer mode : each request triggers a :
+                                         a buffer transfer, a block transfer, a repeated block transfer or a linked list transfer
+                                         This parameter can be a value of @ref MDMA_Transfer_TriggerMode  */
+
+  uint32_t Priority;                 /*!< Specifies the software priority for the MDMAy channelx.
+                                         This parameter can be a value of @ref MDMA_Priority_level */
+
+  uint32_t Endianness;                /*!< Specifies if the MDMA transactions preserve the Little endianness.
+                                         This parameter can be a value of @ref MDMA_Endianness */
+
+  uint32_t SourceInc;                /*!< Specifies if the Source increment mode .
+                                         This parameter can be a value of @ref MDMA_Source_increment_mode */
+
+  uint32_t DestinationInc;           /*!< Specifies if the Destination increment mode .
+                                         This parameter can be a value of @ref MDMA_Destination_increment_mode */
+
+  uint32_t SourceDataSize;           /*!< Specifies the source data size.
+                                         This parameter can be a value of @ref MDMA_Source_data_size */
+
+  uint32_t DestDataSize;             /*!< Specifies the destination data size.
+                                          This parameter can be a value of @ref MDMA_Destination_data_size */
+
+
+  uint32_t DataAlignment;            /*!< Specifies the source to destination Memory data packing/padding mode.
+                                            This parameter can be a value of @ref MDMA_data_Alignment */
+
+  uint32_t BufferTransferLength;      /*!< Specifies the buffer Transfer Length (number of bytes),
+                                          this is the number of bytes to be transferred in a single transfer (1 byte to 128 bytes)*/
+
+  uint32_t SourceBurst;              /*!< Specifies the Burst transfer configuration for the source memory transfers.
+                                         It specifies the amount of data to be transferred in a single non interruptable
+                                         transaction.
+                                         This parameter can be a value of @ref MDMA_Source_burst
+                                         @note : the burst may be FIXED/INCR based on SourceInc value ,
+                                         the BURST must be programmed as to ensure that the burst size will be lower than than
+                                         BufferTransferLength */
+
+  uint32_t DestBurst;                 /*!< Specifies the Burst transfer configuration for the destination memory transfers.
+                                           It specifies the amount of data to be transferred in a single non interruptable
+                                           transaction.
+                                           This parameter can be a value of @ref MDMA_Destination_burst
+                                           @note : the burst may be FIXED/INCR based on DestinationInc value ,
+                                           the BURST must be programmed as to ensure that the burst size will be lower than than
+                                           BufferTransferLength */
+
+  int32_t SourceBlockAddressOffset;   /*!< this field specifies the Next block source address offset
+                                           signed value : if > 0 then  increment the next block source Address by offset from where the last block ends
+                                                          if < 0 then  decrement the next block source Address by offset from where the last block ends
+                                                          if == 0, the next block source address starts from where the last block ends
+                                       */
+
+
+  int32_t DestBlockAddressOffset;      /*!< this field specifies the Next block destination address offset
+                                           signed value : if > 0 then  increment the next block destination Address by offset from where the last block ends
+                                                          if < 0 then  decrement the next block destination Address by offset from where the last block ends
+                                                          if == 0, the next block destination address starts from where the last block ends
+                                       */
+
+}MDMA_InitTypeDef;
+
+/**
+  * @brief  HAL MDMA linked list node structure definition
+  * @note   The Linked list node allows to define a new MDMA configuration
+  *         (CTCR ,CBNDTR ,CSAR ,CDAR ,CBRUR, CLAR, CTBR, CMAR and CMDR registers).
+  *         When CLAR register is configured to a non NULL value , each time a transfer ends,
+  *         a new configuration (linked list node) is automatically loaded from the address given in CLAR register.
+  */
+typedef struct
+{
+  __IO uint32_t CTCR;     /*!< New CTCR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CBNDTR;   /*!< New CBNDTR register configuration for the given MDMA linked list node */
+  __IO uint32_t CSAR;     /*!< New CSAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CDAR;     /*!< New CDAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CBRUR;    /*!< New CBRUR register configuration for the given MDMA linked list node  */
+  __IO uint32_t CLAR;     /*!< New CLAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CTBR;     /*!< New CTBR register configuration for the given MDMA linked list node   */
+  __IO uint32_t Reserved; /*!< Reserved register                                                     */
+  __IO uint32_t CMAR;     /*!< New CMAR register configuration for the given MDMA linked list node   */
+  __IO uint32_t CMDR;     /*!< New CMDR register configuration for the given MDMA linked list node   */
+
+}MDMA_LinkNodeTypeDef;
+
+/**
+  * @brief  HAL MDMA linked list node configuration structure definition
+  * @note   used with HAL_MDMA_LinkedList_CreateNode function
+  */
+typedef struct
+{
+  MDMA_InitTypeDef Init;            /*!< configuration of the specified MDMA Linked List Node    */
+  uint32_t         SrcAddress;      /*!< The source memory address for the Linked list Node      */
+  uint32_t         DstAddress;      /*!< The destination memory address for the Linked list Node */
+  uint32_t         BlockDataLength; /*!< The data length of a block in bytes                     */
+  uint32_t         BlockCount;      /*!< The number of blocks to be transferred                  */
+
+  uint32_t PostRequestMaskAddress;  /*!< specifies the address to be updated (written) with PostRequestMaskData after a request is served.
+                                         PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served  */
+
+  uint32_t PostRequestMaskData;     /*!< specifies the value to be written to PostRequestMaskAddress after a request is served.
+                                         PostRequestMaskAddress and PostRequestMaskData could be used to automatically clear a peripheral flag when the request is served  */
+
+
+}MDMA_LinkNodeConfTypeDef;
+
+
+/**
+  * @brief  HAL MDMA State structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_STATE_RESET               = 0x00U,  /*!< MDMA not yet initialized or disabled */
+  HAL_MDMA_STATE_READY               = 0x01U,  /*!< MDMA initialized and ready for use   */
+  HAL_MDMA_STATE_BUSY                = 0x02U,  /*!< MDMA process is ongoing              */
+  HAL_MDMA_STATE_ERROR               = 0x03U,  /*!< MDMA error state                     */
+  HAL_MDMA_STATE_ABORT               = 0x04U,  /*!< MDMA Abort state                     */
+
+}HAL_MDMA_StateTypeDef;
+
+/**
+  * @brief  HAL MDMA Level Complete structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_FULL_TRANSFER         = 0x00U,   /*!< Full transfer         */
+  HAL_MDMA_BUFFER_TRANSFER       = 0x01U,   /*!< Buffer Transfer       */
+  HAL_MDMA_BLOCK_TRANSFER        = 0x02U,   /*!< Block Transfer        */
+  HAL_MDMA_REPEAT_BLOCK_TRANSFER = 0x03U    /*!< repeat block Transfer */
+
+}HAL_MDMA_LevelCompleteTypeDef;
+
+/**
+  * @brief  HAL MDMA Callbacks IDs structure definition
+  */
+typedef enum
+{
+  HAL_MDMA_XFER_CPLT_CB_ID          = 0x00U,    /*!< Full transfer           */
+  HAL_MDMA_XFER_BUFFERCPLT_CB_ID    = 0x01U,    /*!< Buffer Transfer         */
+  HAL_MDMA_XFER_BLOCKCPLT_CB_ID     = 0x02U,    /*!< Block Transfer          */
+  HAL_MDMA_XFER_REPBLOCKCPLT_CB_ID  = 0x03U,    /*!< Repeated Block Transfer */
+  HAL_MDMA_XFER_ERROR_CB_ID         = 0x04U,    /*!< Error                   */
+  HAL_MDMA_XFER_ABORT_CB_ID         = 0x05U,    /*!< Abort                   */
+  HAL_MDMA_XFER_ALL_CB_ID           = 0x06U     /*!< All                     */
+
+}HAL_MDMA_CallbackIDTypeDef;
+
+
+/**
+  * @brief  MDMA handle Structure definition
+  */
+typedef struct __MDMA_HandleTypeDef
+{
+  MDMA_Channel_TypeDef *Instance;                                                              /*!< Register base address                  */
+
+  MDMA_InitTypeDef      Init;                                                                  /*!< MDMA communication parameters          */
+
+  HAL_LockTypeDef       Lock;                                                                  /*!< MDMA locking object                    */
+
+  __IO HAL_MDMA_StateTypeDef  State;                                                           /*!< MDMA transfer state                    */
+
+  void                  *Parent;                                                               /*!< Parent object state                    */
+
+  void                  (* XferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);            /*!< MDMA transfer complete callback        */
+
+  void                  (* XferBufferCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);      /*!< MDMA buffer transfer complete callback */
+
+  void                  (* XferBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma);       /*!< MDMA block transfer complete callback  */
+
+  void                  (* XferRepeatBlockCpltCallback)( struct __MDMA_HandleTypeDef * hmdma); /*!< MDMA block transfer repeat callback    */
+
+  void                  (* XferErrorCallback)( struct __MDMA_HandleTypeDef * hmdma);           /*!< MDMA transfer error callback           */
+
+  void                  (* XferAbortCallback)( struct __MDMA_HandleTypeDef * hmdma);           /*!< MDMA transfer Abort callback           */
+
+
+  MDMA_LinkNodeTypeDef *FirstLinkedListNodeAddress;                                             /*!< specifies the first node address of the transfer list
+                                                                                                     (after the initial node defined by the Init struct)
+                                                                                                     this parameter is used internally by the MDMA driver
+                                                                                                     to construct the linked list node
+                                                                                                */
+
+  MDMA_LinkNodeTypeDef *LastLinkedListNodeAddress;                                             /*!< specifies the last node address of the transfer list
+                                                                                                    this parameter is used internally by the MDMA driver
+                                                                                                    to construct the linked list node
+                                                                                                */
+  uint32_t LinkedListNodeCounter;                                                               /*!< Number of nodes in the MDMA linked list */
+
+  __IO uint32_t          ErrorCode;                                                            /*!< MDMA Error code                        */
+
+} MDMA_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Constants MDMA Exported Constants
+  * @brief    MDMA Exported constants
+  * @{
+  */
+
+/** @defgroup MDMA_Error_Codes MDMA Error Codes
+  * @brief    MDMA Error Codes
+  * @{
+  */
+#define HAL_MDMA_ERROR_NONE        ((uint32_t)0x00000000U)   /*!< No error                               */
+#define HAL_MDMA_ERROR_READ_XFER   ((uint32_t)0x00000001U)   /*!< Read Transfer error                    */
+#define HAL_MDMA_ERROR_WRITE_XFER  ((uint32_t)0x00000002U)   /*!< Write Transfer error                   */
+#define HAL_MDMA_ERROR_MASK_DATA   ((uint32_t)0x00000004U)   /*!< Error Mask Data error                  */
+#define HAL_MDMA_ERROR_LINKED_LIST ((uint32_t)0x00000008U)   /*!< Linked list Data error                 */
+#define HAL_MDMA_ERROR_ALIGNMENT   ((uint32_t)0x00000010U)   /*!< Address/Size alignment  error          */
+#define HAL_MDMA_ERROR_BLOCK_SIZE  ((uint32_t)0x00000020U)   /*!< Block Size error                       */
+#define HAL_MDMA_ERROR_TIMEOUT     ((uint32_t)0x00000040U)   /*!< Timeout error                          */
+#define HAL_MDMA_ERROR_NO_XFER     ((uint32_t)0x00000080U)   /*!< Abort or SW trigger requested with no Xfer ongoing   */
+#define HAL_MDMA_ERROR_BUSY        ((uint32_t)0x00000100U)   /*!< DeInit or SW trigger requested with Xfer ongoing   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Request_selection MDMA Request selection
+  * @brief    MDMA_Request_selection
+  * @{
+  */
+
+#define MDMA_REQUEST_DMA1_Stream0_TC      ((uint32_t)0x00000000U)  /*!< MDMA HW request is DMA1 Stream 0 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream1_TC      ((uint32_t)0x00000001U)  /*!< MDMA HW request is DMA1 Stream 1 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream2_TC      ((uint32_t)0x00000002U)  /*!< MDMA HW request is DMA1 Stream 2 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream3_TC      ((uint32_t)0x00000003U)  /*!< MDMA HW request is DMA1 Stream 3 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream4_TC      ((uint32_t)0x00000004U)  /*!< MDMA HW request is DMA1 Stream 4 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream5_TC      ((uint32_t)0x00000005U)  /*!< MDMA HW request is DMA1 Stream 5 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream6_TC      ((uint32_t)0x00000006U)  /*!< MDMA HW request is DMA1 Stream 6 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA1_Stream7_TC      ((uint32_t)0x00000007U)  /*!< MDMA HW request is DMA1 Stream 7 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream0_TC      ((uint32_t)0x00000008U)  /*!< MDMA HW request is DMA2 Stream 0 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream1_TC      ((uint32_t)0x00000009U)  /*!< MDMA HW request is DMA2 Stream 1 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream2_TC      ((uint32_t)0x0000000AU)  /*!< MDMA HW request is DMA2 Stream 2 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream3_TC      ((uint32_t)0x0000000BU)  /*!< MDMA HW request is DMA2 Stream 3 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream4_TC      ((uint32_t)0x0000000CU)  /*!< MDMA HW request is DMA2 Stream 4 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream5_TC      ((uint32_t)0x0000000DU)  /*!< MDMA HW request is DMA2 Stream 5 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream6_TC      ((uint32_t)0x0000000EU)  /*!< MDMA HW request is DMA2 Stream 6 Transfer Complete Flag   */
+#define MDMA_REQUEST_DMA2_Stream7_TC      ((uint32_t)0x0000000FU)  /*!< MDMA HW request is DMA2 Stream 7 Transfer Complete Flag   */
+#if defined (LTDC)
+#define MDMA_REQUEST_LTDC_LINE_IT         ((uint32_t)0x00000010U)  /*!< MDMA HW request is LTDC Line interrupt Flag               */
+#endif /* LTDC */
+#if defined (JPEG)
+#define MDMA_REQUEST_JPEG_INFIFO_TH       ((uint32_t)0x00000011U)  /*!< MDMA HW request is JPEG Input FIFO threshold Flag         */
+#define MDMA_REQUEST_JPEG_INFIFO_NF       ((uint32_t)0x00000012U)  /*!< MDMA HW request is JPEG Input FIFO not full Flag          */
+#define MDMA_REQUEST_JPEG_OUTFIFO_TH      ((uint32_t)0x00000013U)  /*!< MDMA HW request is JPEG Output FIFO threshold Flag        */
+#define MDMA_REQUEST_JPEG_OUTFIFO_NE      ((uint32_t)0x00000014U)  /*!< MDMA HW request is JPEG Output FIFO not empty Flag        */
+#define MDMA_REQUEST_JPEG_END_CONVERSION  ((uint32_t)0x00000015U)  /*!< MDMA HW request is JPEG End of conversion Flag            */
+#endif /* JPEG */
+#if defined (OCTOSPI1)
+#define MDMA_REQUEST_OCTOSPI1_FIFO_TH     ((uint32_t)0x00000016U)  /*!< MDMA HW request is OCTOSPI1 FIFO threshold Flag           */
+#define MDMA_REQUEST_OCTOSPI1_TC          ((uint32_t)0x00000017U)  /*!< MDMA HW request is OCTOSPI1 Transfer complete Flag        */
+#endif /* OCTOSPI1 */
+#if defined (QUADSPI)
+#define MDMA_REQUEST_QUADSPI_FIFO_TH      ((uint32_t)0x00000016U)  /*!< MDMA HW request is QSPI FIFO threshold Flag               */
+#define MDMA_REQUEST_QUADSPI_TC           ((uint32_t)0x00000017U)  /*!< MDMA HW request is QSPI Transfer complete Flag            */
+#endif /* QUADSPI */
+#define MDMA_REQUEST_DMA2D_CLUT_TC        ((uint32_t)0x00000018U)  /*!< MDMA HW request is DMA2D CLUT Transfer Complete Flag      */
+#define MDMA_REQUEST_DMA2D_TC             ((uint32_t)0x00000019U)  /*!< MDMA HW request is DMA2D Transfer Complete Flag           */
+#define MDMA_REQUEST_DMA2D_TW             ((uint32_t)0x0000001AU)  /*!< MDMA HW request is DMA2D Transfer Watermark Flag          */
+
+#if defined (DSI)
+#define MDMA_REQUEST_DSI_TEARING_EFFECT   ((uint32_t)0x0000001BU)  /*!< MDMA HW request is DSI Tearing Effect Flag                */
+#define MDMA_REQUEST_DSI_END_REFRESH      ((uint32_t)0x0000001CU)  /*!< MDMA HW request is DSI End of refresh  Flag               */
+#endif /* DSI */
+
+#define MDMA_REQUEST_SDMMC1_END_DATA      ((uint32_t)0x0000001DU)  /*!< MDMA HW request is SDMMC1 End of Data Flag                */
+
+#define MDMA_REQUEST_SDMMC1_DMA_ENDBUFFER ((uint32_t)0x0000001EU)  /*!< MDMA HW request is SDMMC1 Internal DMA buffer End Flag    */
+#define MDMA_REQUEST_SDMMC1_COMMAND_END   ((uint32_t)0x0000001FU)  /*!< MDMA HW request is SDMMC1 Command End Flag                */
+
+#if defined (OCTOSPI2)
+#define MDMA_REQUEST_OCTOSPI2_FIFO_TH     ((uint32_t)0x00000020U)  /*!< MDMA HW request is OCTOSPI2 FIFO threshold Flag           */
+#define MDMA_REQUEST_OCTOSPI2_TC          ((uint32_t)0x00000021U)  /*!< MDMA HW request is OCTOSPI2 Transfer complete Flag        */
+#endif /* OCTOSPI2 */
+
+#define MDMA_REQUEST_SW                   ((uint32_t)0x40000000U) /*!< MDMA SW request                                            */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Transfer_TriggerMode MDMA Transfer Trigger  Mode
+  * @brief    MDMA Transfer Trigger Mode
+  * @{
+  */
+#define MDMA_BUFFER_TRANSFER          ((uint32_t)0x00000000U)        /*!< Each MDMA request (SW or HW) triggers a buffer transfer                                */
+#define MDMA_BLOCK_TRANSFER           ((uint32_t)MDMA_CTCR_TRGM_0)   /*!< Each MDMA request (SW or HW) triggers a block transfer                                 */
+#define MDMA_REPEAT_BLOCK_TRANSFER    ((uint32_t)MDMA_CTCR_TRGM_1)   /*!< Each MDMA request (SW or HW) triggers a repeated block transfer                        */
+#define MDMA_FULL_TRANSFER            ((uint32_t)MDMA_CTCR_TRGM)     /*!< Each MDMA request (SW or HW) triggers a Full transfer or a linked list transfer if any */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Priority_level MDMA Priority level
+  * @brief    MDMA Priority level
+  * @{
+  */
+#define MDMA_PRIORITY_LOW             ((uint32_t)0x00000000U)     /*!< Priority level: Low      */
+#define MDMA_PRIORITY_MEDIUM          ((uint32_t)MDMA_CCR_PL_0)  /*!< Priority level: Medium    */
+#define MDMA_PRIORITY_HIGH            ((uint32_t)MDMA_CCR_PL_1)  /*!< Priority level: High      */
+#define MDMA_PRIORITY_VERY_HIGH       ((uint32_t)MDMA_CCR_PL)    /*!< Priority level: Very High */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup MDMA_Endianness MDMA Endianness
+  * @brief    MDMA Endianness
+  * @{
+  */
+#define MDMA_LITTLE_ENDIANNESS_PRESERVE          ((uint32_t)0x00000000U)   /*!< little endianness preserve                                               */
+#define MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE     ((uint32_t)MDMA_CCR_BEX)  /*!< BYTEs endianness exchange when destination data size is > Byte           */
+#define MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE ((uint32_t)MDMA_CCR_HEX)  /*!< HALF WORDs endianness exchange when destination data size is > HALF WORD */
+#define MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE     ((uint32_t)MDMA_CCR_WEX)  /*!< WORDs endianness exchange  when destination data size is > DOUBLE WORD   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_increment_mode MDMA Source increment mode
+  * @brief    MDMA Source increment mode
+  * @{
+  */
+#define MDMA_SRC_INC_DISABLE      ((uint32_t)0x00000000U)                                     /*!< Source address pointer is fixed                                   */
+#define MDMA_SRC_INC_BYTE         ((uint32_t)MDMA_CTCR_SINC_1)                                /*!< Source address pointer is incremented by a BYTE (8 bits)          */
+#define MDMA_SRC_INC_HALFWORD     ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits)    */
+#define MDMA_SRC_INC_WORD         ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits)         */
+#define MDMA_SRC_INC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_SINC_1 | (uint32_t)MDMA_CTCR_SINCOS)   /*!< Source address pointer is incremented by a double Word (64 bits)) */
+#define MDMA_SRC_DEC_BYTE         ((uint32_t)MDMA_CTCR_SINC)                                  /*!< Source address pointer is decremented by a BYTE (8 bits)          */
+#define MDMA_SRC_DEC_HALFWORD     ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_0)   /*!< Source address pointer is decremented by a half Word (16 bits)    */
+#define MDMA_SRC_DEC_WORD         ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS_1)   /*!< Source address pointer is decremented by a Word (32 bits)         */
+#define MDMA_SRC_DEC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_SINC | (uint32_t)MDMA_CTCR_SINCOS)     /*!< Source address pointer is decremented by a double Word (64 bits)) */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_increment_mode MDMA Destination increment mode
+  * @brief    MDMA Destination increment mode
+  * @{
+  */
+#define MDMA_DEST_INC_DISABLE      ((uint32_t)0x00000000U)                                     /*!< Source address pointer is fixed                                   */
+#define MDMA_DEST_INC_BYTE         ((uint32_t)MDMA_CTCR_DINC_1)                                /*!< Source address pointer is incremented by a BYTE (8 bits)          */
+#define MDMA_DEST_INC_HALFWORD     ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_0) /*!< Source address pointer is incremented by a half Word (16 bits)    */
+#define MDMA_DEST_INC_WORD         ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS_1) /*!< Source address pointer is incremented by a Word (32 bits)         */
+#define MDMA_DEST_INC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_DINC_1 | (uint32_t)MDMA_CTCR_DINCOS)   /*!< Source address pointer is incremented by a double Word (64 bits)) */
+#define MDMA_DEST_DEC_BYTE         ((uint32_t)MDMA_CTCR_DINC)                                  /*!< Source address pointer is decremented by a BYTE (8 bits)          */
+#define MDMA_DEST_DEC_HALFWORD     ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_0)   /*!< Source address pointer is decremented by a half Word (16 bits)    */
+#define MDMA_DEST_DEC_WORD         ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS_1)   /*!< Source address pointer is decremented by a Word (32 bits)         */
+#define MDMA_DEST_DEC_DOUBLEWORD   ((uint32_t)MDMA_CTCR_DINC | (uint32_t)MDMA_CTCR_DINCOS)     /*!< Source address pointer is decremented by a double Word (64 bits)) */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_data_size MDMA Source data size
+  * @brief    MDMA Source data size
+  * @{
+  */
+#define MDMA_SRC_DATASIZE_BYTE        ((uint32_t)0x00000000U)         /*!< Source data size is Byte        */
+#define MDMA_SRC_DATASIZE_HALFWORD    ((uint32_t)MDMA_CTCR_SSIZE_0)   /*!< Source data size is half word   */
+#define MDMA_SRC_DATASIZE_WORD        ((uint32_t)MDMA_CTCR_SSIZE_1)   /*!< Source data size is word        */
+#define MDMA_SRC_DATASIZE_DOUBLEWORD  ((uint32_t)MDMA_CTCR_SSIZE)     /*!< Source data size is double word */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_data_size MDMA Destination data size
+  * @brief    MDMA Destination data size
+  * @{
+  */
+#define MDMA_DEST_DATASIZE_BYTE        ((uint32_t)0x00000000U)         /*!< Destination data size is Byte        */
+#define MDMA_DEST_DATASIZE_HALFWORD    ((uint32_t)MDMA_CTCR_DSIZE_0)   /*!< Destination data size is half word   */
+#define MDMA_DEST_DATASIZE_WORD        ((uint32_t)MDMA_CTCR_DSIZE_1)   /*!< Destination data size is word        */
+#define MDMA_DEST_DATASIZE_DOUBLEWORD  ((uint32_t)MDMA_CTCR_DSIZE)     /*!< Destination data size is double word */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_data_Alignment MDMA data alignment
+  * @brief    MDMA data alignment
+  * @{
+  */
+#define MDMA_DATAALIGN_PACKENABLE        ((uint32_t)MDMA_CTCR_PKE)     /*!< The source data is packed/un-packed into the destination data size
+                                                                            All data are right aligned, in Little Endien mode.                                              */
+#define MDMA_DATAALIGN_RIGHT            ((uint32_t)0x00000000U)        /*!< Right Aligned, padded w/ 0s (default)                                                           */
+#define MDMA_DATAALIGN_RIGHT_SIGNED     ((uint32_t)MDMA_CTCR_PAM_0)    /*!< Right Aligned, Sign extended ,
+                                                                            Note : this mode is allowed only if the Source data size is smaller than Destination data size  */
+#define MDMA_DATAALIGN_LEFT             ((uint32_t)MDMA_CTCR_PAM_1)    /*!< Left Aligned (padded with 0s)                                                                   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Source_burst MDMA Source burst
+  * @brief    MDMA Source burst
+  * @{
+  */
+#define MDMA_SOURCE_BURST_SINGLE        ((uint32_t)0x00000000U)                                       /*!< single transfer */
+#define MDMA_SOURCE_BURST_2BEATS        ((uint32_t)MDMA_CTCR_SBURST_0)                                /*!< Burst 2 beats   */
+#define MDMA_SOURCE_BURST_4BEATS        ((uint32_t)MDMA_CTCR_SBURST_1)                                /*!< Burst 4 beats   */
+#define MDMA_SOURCE_BURST_8BEATS        ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_1) /*!< Burst 8 beats   */
+#define MDMA_SOURCE_BURST_16BEATS       ((uint32_t)MDMA_CTCR_SBURST_2)                                /*!< Burst 16 beats  */
+#define MDMA_SOURCE_BURST_32BEATS       ((uint32_t)MDMA_CTCR_SBURST_0 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 32 beats  */
+#define MDMA_SOURCE_BURST_64BEATS       ((uint32_t)MDMA_CTCR_SBURST_1 | (uint32_t)MDMA_CTCR_SBURST_2) /*!< Burst 64 beats  */
+#define MDMA_SOURCE_BURST_128BEATS      ((uint32_t)MDMA_CTCR_SBURST)                                  /*!< Burst 128 beats */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_Destination_burst MDMA Destination burst
+  * @brief    MDMA Destination burst
+  * @{
+  */
+#define MDMA_DEST_BURST_SINGLE        ((uint32_t)0x00000000U)                                        /*!< single transfer */
+#define MDMA_DEST_BURST_2BEATS        ((uint32_t)MDMA_CTCR_DBURST_0)                                 /*!< Burst 2 beats   */
+#define MDMA_DEST_BURST_4BEATS        ((uint32_t)MDMA_CTCR_DBURST_1)                                 /*!< Burst 4 beats   */
+#define MDMA_DEST_BURST_8BEATS        ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_1)  /*!< Burst 8 beats   */
+#define MDMA_DEST_BURST_16BEATS       ((uint32_t)MDMA_CTCR_DBURST_2)                                 /*!< Burst 16 beats  */
+#define MDMA_DEST_BURST_32BEATS       ((uint32_t)MDMA_CTCR_DBURST_0 | (uint32_t)MDMA_CTCR_DBURST_2)  /*!< Burst 32 beats  */
+#define MDMA_DEST_BURST_64BEATS       ((uint32_t)MDMA_CTCR_DBURST_1 | (uint32_t)MDMA_CTCR_DBURST_2)  /*!< Burst 64 beats  */
+#define MDMA_DEST_BURST_128BEATS      ((uint32_t)MDMA_CTCR_DBURST)                                   /*!< Burst 128 beats */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_interrupt_enable_definitions MDMA interrupt enable definitions
+  * @brief    MDMA interrupt enable definitions
+  * @{
+  */
+#define MDMA_IT_TE   ((uint32_t)MDMA_CCR_TEIE)   /*!< Transfer Error interrupt            */
+#define MDMA_IT_CTC  ((uint32_t)MDMA_CCR_CTCIE)  /*!< Channel Transfer Complete interrupt */
+#define MDMA_IT_BRT  ((uint32_t)MDMA_CCR_BRTIE)  /*!< Block Repeat Transfer interrupt     */
+#define MDMA_IT_BT   ((uint32_t)MDMA_CCR_BTIE)   /*!< Block Transfer interrupt            */
+#define MDMA_IT_BFTC ((uint32_t)MDMA_CCR_TCIE)   /*!< Buffer Transfer Complete interrupt  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MDMA_flag_definitions MDMA flag definitions
+  * @brief    MDMA flag definitions
+  * @{
+  */
+#define MDMA_FLAG_TE    ((uint32_t)MDMA_CISR_TEIF)  /*!< Transfer Error flag                 */
+#define MDMA_FLAG_CTC   ((uint32_t)MDMA_CISR_CTCIF) /*!< Channel Transfer Complete flag      */
+#define MDMA_FLAG_BRT   ((uint32_t)MDMA_CISR_BRTIF) /*!< Block Repeat Transfer complete flag */
+#define MDMA_FLAG_BT    ((uint32_t)MDMA_CISR_BTIF)  /*!< Block Transfer complete flag        */
+#define MDMA_FLAG_BFTC  ((uint32_t)MDMA_CISR_TCIF)  /*!< BuFfer Transfer complete flag       */
+#define MDMA_FLAG_CRQA  ((uint32_t)MDMA_CISR_CRQA)  /*!< Channel ReQest Active flag          */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup MDMA_Exported_Macros MDMA Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the specified MDMA Channel.
+  * @param  __HANDLE__: MDMA handle
+  * @retval None
+  */
+#define __HAL_MDMA_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CCR |=  MDMA_CCR_EN)
+
+/**
+  * @brief  Disable the specified MDMA Channel.
+  * @param  __HANDLE__: MDMA handle
+  * @retval None
+  */
+#define __HAL_MDMA_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CCR &=  ~MDMA_CCR_EN)
+
+/**
+  * @brief  Get the MDMA Channel pending flags.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_FLAG_TE   : Transfer Error flag.
+  *            @arg MDMA_FLAG_CTC  : Channel Transfer Complete flag.
+  *            @arg MDMA_FLAG_BRT  : Block Repeat Transfer flag.
+  *            @arg MDMA_FLAG_BT   : Block Transfer complete flag.
+  *            @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
+  *            @arg MDMA_FLAG_CRQA : Channel ReQest Active flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_MDMA_GET_FLAG(__HANDLE__, __FLAG__)  ((__HANDLE__)->Instance->CISR & (__FLAG__))
+
+/**
+  * @brief  Clear the MDMA Stream pending flags.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_FLAG_TE   : Transfer Error flag.
+  *            @arg MDMA_FLAG_CTC  : Channel Transfer Complete flag.
+  *            @arg MDMA_FLAG_BRT  : Block Repeat Transfer flag.
+  *            @arg MDMA_FLAG_BT   : Block Transfer complete flag.
+  *            @arg MDMA_FLAG_BFTC : BuFfer Transfer Complete flag.
+  * @retval None
+  */
+#define __HAL_MDMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CIFCR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified MDMA Channel interrupts.
+  * @param  __HANDLE__: MDMA handle
+  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval None
+  */
+#define __HAL_MDMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified MDMA Channel interrupts.
+  * @param  __HANDLE__: MDMA handle
+  * @param __INTERRUPT__: specifies the MDMA interrupt sources to be enabled or disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval None
+  */
+#define __HAL_MDMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified MDMA Channel interrupt is enabled or not.
+  * @param  __HANDLE__: MDMA handle
+  * @param  __INTERRUPT__: specifies the MDMA interrupt source to check.
+  *            @arg MDMA_IT_TE   :  Transfer Error interrupt mask
+  *            @arg MDMA_IT_CTC  :  Channel Transfer Complete interrupt mask
+  *            @arg MDMA_IT_BRT  :  Block Repeat Transfer interrupt mask
+  *            @arg MDMA_IT_BT   :  Block Transfer interrupt mask
+  *            @arg MDMA_IT_BFTC :  BuFfer Transfer Complete interrupt mask
+  * @retval The state of MDMA_IT (SET or RESET).
+  */
+#define __HAL_MDMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__HANDLE__)->Instance->CCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Writes the number of data in bytes to be transferred on the MDMA Channelx.
+  * @param  __HANDLE__ : MDMA handle
+  * @param  __COUNTER__: Number of data in bytes to be transferred.
+  * @retval None
+  */
+#define __HAL_MDMA_SET_COUNTER(__HANDLE__, __COUNTER__)  ((__HANDLE__)->Instance->CBNDTR |= ((__COUNTER__) & MDMA_CBNDTR_BNDT))
+
+/**
+  * @brief  Returns the number of remaining data in bytes in the current MDMA Channelx transfer.
+  * @param  __HANDLE__ : MDMA handle
+  * @retval The number of remaining data in bytes in the current MDMA Channelx transfer.
+  */
+#define __HAL_MDMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CBNDTR & MDMA_CBNDTR_BNDT)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MDMA_Exported_Functions  MDMA Exported Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions *****************************/
+/** @defgroup MDMA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief   Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDMA_Init(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_DeInit (MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_ConfigPostRequestMask(MDMA_HandleTypeDef *hmdma, uint32_t MaskAddress, uint32_t MaskData);
+
+HAL_StatusTypeDef HAL_MDMA_RegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID, void (* pCallback)(MDMA_HandleTypeDef *_hmdma));
+HAL_StatusTypeDef HAL_MDMA_UnRegisterCallback(MDMA_HandleTypeDef *hmdma, HAL_MDMA_CallbackIDTypeDef CallbackID);
+
+/**
+  * @}
+  */
+
+/* Linked list operation functions ********************************************/
+/** @defgroup MDMA_Exported_Functions_Group2 Linked List operation functions
+  * @brief   Linked list operation functions
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_MDMA_LinkedList_CreateNode(MDMA_LinkNodeTypeDef *pNode, MDMA_LinkNodeConfTypeDef *pNodeConfig);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_AddNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNewNode, MDMA_LinkNodeTypeDef *pPrevNode);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_RemoveNode(MDMA_HandleTypeDef *hmdma, MDMA_LinkNodeTypeDef *pNode);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_EnableCircularMode(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_LinkedList_DisableCircularMode(MDMA_HandleTypeDef *hmdma);
+
+
+/**
+  * @}
+  */
+
+/* IO operation functions *****************************************************/
+/** @defgroup MDMA_Exported_Functions_Group3 I/O operation functions
+  * @brief   I/O operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MDMA_Start (MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
+HAL_StatusTypeDef HAL_MDMA_Start_IT(MDMA_HandleTypeDef *hmdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t BlockDataLength, uint32_t BlockCount);
+HAL_StatusTypeDef HAL_MDMA_Abort(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_Abort_IT(MDMA_HandleTypeDef *hmdma);
+HAL_StatusTypeDef HAL_MDMA_PollForTransfer(MDMA_HandleTypeDef *hmdma, HAL_MDMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MDMA_GenerateSWRequest(MDMA_HandleTypeDef *hmdma);
+void HAL_MDMA_IRQHandler(MDMA_HandleTypeDef *hmdma);
+
+/**
+  * @}
+  */
+
+/* Peripheral State and Error functions ***************************************/
+/** @defgroup MDMA_Exported_Functions_Group4 Peripheral State functions
+  * @brief    Peripheral State functions
+  * @{
+  */
+HAL_MDMA_StateTypeDef HAL_MDMA_GetState(MDMA_HandleTypeDef *hmdma);
+uint32_t              HAL_MDMA_GetError(MDMA_HandleTypeDef *hmdma);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MDMA_Private_Types MDMA Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup MDMA_Private_Defines MDMA Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Variables MDMA Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Constants MDMA Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MDMA_Private_Macros MDMA Private Macros
+  * @{
+  */
+
+#define IS_MDMA_LEVEL_COMPLETE(__LEVEL__) (((__LEVEL__) == HAL_MDMA_FULL_TRANSFER )  || \
+                                           ((__LEVEL__) == HAL_MDMA_BUFFER_TRANSFER )|| \
+                                           ((__LEVEL__) == HAL_MDMA_BLOCK_TRANSFER ) || \
+                                           ((__LEVEL__) == HAL_MDMA_REPEAT_BLOCK_TRANSFER ))
+
+
+#define IS_MDMA_PRIORITY(__PRIORITY__) (((__PRIORITY__) == MDMA_PRIORITY_LOW )   || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_MEDIUM) || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_HIGH)   || \
+                                        ((__PRIORITY__) == MDMA_PRIORITY_VERY_HIGH))
+
+#define IS_MDMA_ENDIANNESS_MODE(__ENDIANNESS__) (((__ENDIANNESS__) == MDMA_LITTLE_ENDIANNESS_PRESERVE )         || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_BYTE_ENDIANNESS_EXCHANGE)     || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_HALFWORD_ENDIANNESS_EXCHANGE) || \
+                                                 ((__ENDIANNESS__) == MDMA_LITTLE_WORD_ENDIANNESS_EXCHANGE))
+
+
+#if defined (OCTOSPI2)
+#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_OCTOSPI2_TC))
+#else
+#define IS_MDMA_REQUEST(__REQUEST__) (((__REQUEST__) == MDMA_REQUEST_SW ) || ((__REQUEST__) <= MDMA_REQUEST_SDMMC1_COMMAND_END))
+#endif /* OCTOSPI2 */
+
+#define IS_MDMA_SOURCE_INC(__INC__) (((__INC__) == MDMA_SRC_INC_DISABLE )   || \
+                                     ((__INC__) == MDMA_SRC_INC_BYTE )      || \
+                                     ((__INC__) == MDMA_SRC_INC_HALFWORD )  || \
+                                     ((__INC__) == MDMA_SRC_INC_WORD )      || \
+                                     ((__INC__) == MDMA_SRC_INC_DOUBLEWORD) || \
+                                     ((__INC__) == MDMA_SRC_DEC_BYTE)       || \
+                                     ((__INC__) == MDMA_SRC_DEC_HALFWORD)   || \
+                                     ((__INC__) == MDMA_SRC_DEC_WORD)       || \
+                                     ((__INC__) == MDMA_SRC_DEC_DOUBLEWORD))
+
+#define IS_MDMA_DESTINATION_INC(__INC__) (((__INC__) == MDMA_DEST_INC_DISABLE )   || \
+                                          ((__INC__) == MDMA_DEST_INC_BYTE )      || \
+                                          ((__INC__) == MDMA_DEST_INC_HALFWORD )  || \
+                                          ((__INC__) == MDMA_DEST_INC_WORD )      || \
+                                          ((__INC__) == MDMA_DEST_INC_DOUBLEWORD) || \
+                                          ((__INC__) == MDMA_DEST_DEC_BYTE)       || \
+                                          ((__INC__) == MDMA_DEST_DEC_HALFWORD)   || \
+                                          ((__INC__) == MDMA_DEST_DEC_WORD)       || \
+                                          ((__INC__) == MDMA_DEST_DEC_DOUBLEWORD))
+
+#define IS_MDMA_SOURCE_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_SRC_DATASIZE_BYTE )     || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_HALFWORD ) || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_WORD )     || \
+                                           ((__SIZE__) == MDMA_SRC_DATASIZE_DOUBLEWORD))
+
+#define IS_MDMA_DESTINATION_DATASIZE(__SIZE__) (((__SIZE__) == MDMA_DEST_DATASIZE_BYTE )     || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_HALFWORD ) || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_WORD )     || \
+                                                ((__SIZE__) == MDMA_DEST_DATASIZE_DOUBLEWORD))
+
+#define IS_MDMA_DATA_ALIGNMENT(__ALIGNMENT__) (((__ALIGNMENT__) == MDMA_DATAALIGN_PACKENABLE )    || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT )         || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_RIGHT_SIGNED )  || \
+                                               ((__ALIGNMENT__) == MDMA_DATAALIGN_LEFT))
+
+
+#define IS_MDMA_SOURCE_BURST(__BURST__) (((__BURST__) == MDMA_SOURCE_BURST_SINGLE ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_2BEATS ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_4BEATS ) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_8BEATS)  || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_16BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_32BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_64BEATS) || \
+                                         ((__BURST__) == MDMA_SOURCE_BURST_128BEATS))
+
+
+#define IS_MDMA_DESTINATION_BURST(__BURST__) (((__BURST__) == MDMA_DEST_BURST_SINGLE ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_2BEATS ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_4BEATS ) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_8BEATS)  || \
+                                              ((__BURST__) == MDMA_DEST_BURST_16BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_32BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_64BEATS) || \
+                                              ((__BURST__) == MDMA_DEST_BURST_128BEATS))
+
+ #define IS_MDMA_TRANSFER_TRIGGER_MODE(__MODE__) (((__MODE__) == MDMA_BUFFER_TRANSFER )      || \
+                                                  ((__MODE__) == MDMA_BLOCK_TRANSFER )        || \
+                                                  ((__MODE__) == MDMA_REPEAT_BLOCK_TRANSFER ) || \
+                                                  ((__MODE__) == MDMA_FULL_TRANSFER))
+
+#define IS_MDMA_BUFFER_TRANSFER_LENGTH(__LENGTH__) (((__LENGTH__) >= 0x00000001U) && ((__LENGTH__) < 0x000000FFU))
+
+#define IS_MDMA_BLOCK_COUNT(__COUNT__) (((__COUNT__) > 0U ) && ((__COUNT__) <= 4096U))
+
+#define IS_MDMA_TRANSFER_LENGTH(SIZE) (((SIZE) > 0U) && ((SIZE) <= 65536U))
+
+#define IS_MDMA_BLOCK_ADDR_OFFSET(__BLOCK_ADD_OFFSET__) (((__BLOCK_ADD_OFFSET__) > (-65536)) && ((__BLOCK_ADD_OFFSET__) < 65536))
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup MDMA_Private_Functions_Prototypes MDMA Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MDMA_Private_Functions MDMA Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_MDMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc.h

@@ -0,0 +1,804 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_mmc.h
+  * @author  MCD Application Team
+  * @brief   Header file of MMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_MMC_H
+#define STM32H7xx_HAL_MMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_sdmmc.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MMC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup MMC_Exported_Types MMC Exported Types
+  * @{
+  */
+
+/** @defgroup MMC_Exported_Types_Group1 MMC State enumeration structure
+  * @{
+  */
+typedef enum
+{
+  HAL_MMC_STATE_RESET                  = ((uint32_t)0x00000000U),  /*!< MMC not yet initialized or disabled  */
+  HAL_MMC_STATE_READY                  = ((uint32_t)0x00000001U),  /*!< MMC initialized and ready for use    */
+  HAL_MMC_STATE_TIMEOUT                = ((uint32_t)0x00000002U),  /*!< MMC Timeout state                    */
+  HAL_MMC_STATE_BUSY                   = ((uint32_t)0x00000003U),  /*!< MMC process ongoing                  */
+  HAL_MMC_STATE_PROGRAMMING            = ((uint32_t)0x00000004U),  /*!< MMC Programming State                */
+  HAL_MMC_STATE_RECEIVING              = ((uint32_t)0x00000005U),  /*!< MMC Receinving State                 */
+  HAL_MMC_STATE_TRANSFER               = ((uint32_t)0x00000006U),  /*!< MMC Transfert State                  */
+  HAL_MMC_STATE_ERROR                  = ((uint32_t)0x0000000FU)   /*!< MMC is in error state                */
+}HAL_MMC_StateTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group2 MMC Card State enumeration structure
+  * @{
+  */
+typedef uint32_t HAL_MMC_CardStateTypeDef;
+
+#define HAL_MMC_CARD_READY          0x00000001U  /*!< Card state is ready                     */
+#define HAL_MMC_CARD_IDENTIFICATION 0x00000002U  /*!< Card is in identification state         */
+#define HAL_MMC_CARD_STANDBY        0x00000003U  /*!< Card is in standby state                */
+#define HAL_MMC_CARD_TRANSFER       0x00000004U  /*!< Card is in transfer state               */
+#define HAL_MMC_CARD_SENDING        0x00000005U  /*!< Card is sending an operation            */
+#define HAL_MMC_CARD_RECEIVING      0x00000006U  /*!< Card is receiving operation information */
+#define HAL_MMC_CARD_PROGRAMMING    0x00000007U  /*!< Card is in programming state            */
+#define HAL_MMC_CARD_DISCONNECTED   0x00000008U  /*!< Card is disconnected                    */
+#define HAL_MMC_CARD_ERROR          0x000000FFU  /*!< Card response Error                     */
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group3 MMC Handle Structure definition
+  * @{
+  */
+#define MMC_InitTypeDef      SDMMC_InitTypeDef
+#define MMC_TypeDef          SDMMC_TypeDef
+
+/**
+  * @brief  MMC Card Information Structure definition
+  */
+typedef struct
+{
+  uint32_t CardType;                     /*!< Specifies the card Type                         */
+
+  uint32_t Class;                        /*!< Specifies the class of the card class           */
+
+  uint32_t RelCardAdd;                   /*!< Specifies the Relative Card Address             */
+
+  uint32_t BlockNbr;                     /*!< Specifies the Card Capacity in blocks           */
+
+  uint32_t BlockSize;                    /*!< Specifies one block size in bytes               */
+
+  uint32_t LogBlockNbr;                  /*!< Specifies the Card logical Capacity in blocks   */
+
+  uint32_t LogBlockSize;                 /*!< Specifies logical block size in bytes           */
+
+}HAL_MMC_CardInfoTypeDef;
+
+/**
+  * @brief  MMC handle Structure definition
+  */
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+typedef struct __MMC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_MMC_REGISTER_CALLBACKS */
+{
+  MMC_TypeDef                  *Instance;        /*!< MMC registers base address           */
+
+  MMC_InitTypeDef              Init;             /*!< MMC required parameters              */
+
+  HAL_LockTypeDef              Lock;             /*!< MMC locking object                   */
+
+  uint8_t                      *pTxBuffPtr;      /*!< Pointer to MMC Tx transfer Buffer    */
+
+  uint32_t                     TxXferSize;       /*!< MMC Tx Transfer size                 */
+
+  uint8_t                      *pRxBuffPtr;      /*!< Pointer to MMC Rx transfer Buffer    */
+
+  uint32_t                     RxXferSize;       /*!< MMC Rx Transfer size                 */
+
+  __IO uint32_t                Context;          /*!< MMC transfer context                 */
+
+  __IO HAL_MMC_StateTypeDef    State;            /*!< MMC card State                       */
+
+  __IO uint32_t                ErrorCode;        /*!< MMC Card Error codes                 */
+
+  HAL_MMC_CardInfoTypeDef      MmcCard;          /*!< MMC Card information                 */
+
+  uint32_t                     CSD[4U];          /*!< MMC card specific data table         */
+
+  uint32_t                     CID[4U];          /*!< MMC card identification number table */
+
+  uint32_t                     Ext_CSD[128];
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+  void (* TxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
+  void (* RxCpltCallback)                 (struct __MMC_HandleTypeDef *hmmc);
+  void (* ErrorCallback)                  (struct __MMC_HandleTypeDef *hmmc);
+  void (* AbortCpltCallback)              (struct __MMC_HandleTypeDef *hmmc);
+  void (* Read_DMADblBuf0CpltCallback)    (struct __MMC_HandleTypeDef *hmmc);
+  void (* Read_DMADblBuf1CpltCallback)    (struct __MMC_HandleTypeDef *hmmc);
+  void (* Write_DMADblBuf0CpltCallback)   (struct __MMC_HandleTypeDef *hmmc);
+  void (* Write_DMADblBuf1CpltCallback)   (struct __MMC_HandleTypeDef *hmmc);
+
+  void (* MspInitCallback)                (struct __MMC_HandleTypeDef *hmmc);
+  void (* MspDeInitCallback)              (struct __MMC_HandleTypeDef *hmmc);
+#endif
+}MMC_HandleTypeDef;
+
+
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group4 Card Specific Data: CSD Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */
+  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */
+  __IO uint8_t  Reserved1;            /*!< Reserved                              */
+  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */
+  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */
+  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */
+  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */
+  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */
+  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */
+  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */
+  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */
+  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */
+  __IO uint8_t  Reserved2;            /*!< Reserved                              */
+  __IO uint32_t DeviceSize;           /*!< Device Size                           */
+  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */
+  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */
+  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */
+  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */
+  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */
+  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */
+  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */
+  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */
+  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */
+  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */
+  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */
+  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */
+  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */
+  __IO uint8_t  Reserved3;            /*!< Reserved                              */
+  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */
+  __IO uint8_t  FileFormatGroup;      /*!< File format group                     */
+  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */
+  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */
+  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */
+  __IO uint8_t  FileFormat;           /*!< File format                           */
+  __IO uint8_t  ECC;                  /*!< ECC code                              */
+  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */
+  __IO uint8_t  Reserved4;            /*!< Always 1                              */
+
+}HAL_MMC_CardCSDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group5 Card Identification Data: CID Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */
+  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */
+  __IO uint32_t ProdName1;       /*!< Product Name part1    */
+  __IO uint8_t  ProdName2;       /*!< Product Name part2    */
+  __IO uint8_t  ProdRev;         /*!< Product Revision      */
+  __IO uint32_t ProdSN;          /*!< Product Serial Number */
+  __IO uint8_t  Reserved1;       /*!< Reserved1             */
+  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */
+  __IO uint8_t  CID_CRC;         /*!< CID CRC               */
+  __IO uint8_t  Reserved2;       /*!< Always 1              */
+
+}HAL_MMC_CardCIDTypeDef;
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/** @defgroup MMC_Exported_Types_Group6 MMC Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_MMC_TX_CPLT_CB_ID                 = 0x00U,  /*!< MMC Tx Complete Callback ID                     */
+  HAL_MMC_RX_CPLT_CB_ID                 = 0x01U,  /*!< MMC Rx Complete Callback ID                     */
+  HAL_MMC_ERROR_CB_ID                   = 0x02U,  /*!< MMC Error Callback ID                           */
+  HAL_MMC_ABORT_CB_ID                   = 0x03U,  /*!< MMC Abort Callback ID                           */
+  HAL_MMC_READ_DMA_DBL_BUF0_CPLT_CB_ID  = 0x04U,  /*!< MMC Rx DMA Double Buffer 0 Complete Callback ID */
+  HAL_MMC_READ_DMA_DBL_BUF1_CPLT_CB_ID  = 0x05U,  /*!< MMC Rx DMA Double Buffer 1 Complete Callback ID */
+  HAL_MMC_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U,  /*!< MMC Tx DMA Double Buffer 0 Complete Callback ID */
+  HAL_MMC_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U,  /*!< MMC Tx DMA Double Buffer 1 Complete Callback ID */
+
+  HAL_MMC_MSP_INIT_CB_ID                = 0x10U,  /*!< MMC MspInit Callback ID                         */
+  HAL_MMC_MSP_DEINIT_CB_ID              = 0x11U   /*!< MMC MspDeInit Callback ID                       */
+}HAL_MMC_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Types_Group7 MMC Callback pointer definition
+  * @{
+  */
+typedef void (*pMMC_CallbackTypeDef)           (MMC_HandleTypeDef *hmmc);
+/**
+  * @}
+  */
+#endif
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Constants Exported Constants
+  * @{
+  */
+
+#define MMC_BLOCKSIZE   ((uint32_t)512U) /*!< Block size is 512 bytes */
+
+/** @defgroup MMC_Exported_Constansts_Group1 MMC Error status enumeration Structure definition
+  * @{
+  */
+#define HAL_MMC_ERROR_NONE                     SDMMC_ERROR_NONE                    /*!< No error                                                      */
+#define HAL_MMC_ERROR_CMD_CRC_FAIL             SDMMC_ERROR_CMD_CRC_FAIL            /*!< Command response received (but CRC check failed)              */
+#define HAL_MMC_ERROR_DATA_CRC_FAIL            SDMMC_ERROR_DATA_CRC_FAIL           /*!< Data block sent/received (CRC check failed)                   */
+#define HAL_MMC_ERROR_CMD_RSP_TIMEOUT          SDMMC_ERROR_CMD_RSP_TIMEOUT         /*!< Command response timeout                                      */
+#define HAL_MMC_ERROR_DATA_TIMEOUT             SDMMC_ERROR_DATA_TIMEOUT            /*!< Data timeout                                                  */
+#define HAL_MMC_ERROR_TX_UNDERRUN              SDMMC_ERROR_TX_UNDERRUN             /*!< Transmit FIFO underrun                                        */
+#define HAL_MMC_ERROR_RX_OVERRUN               SDMMC_ERROR_RX_OVERRUN              /*!< Receive FIFO overrun                                          */
+#define HAL_MMC_ERROR_ADDR_MISALIGNED          SDMMC_ERROR_ADDR_MISALIGNED         /*!< Misaligned address                                            */
+#define HAL_MMC_ERROR_BLOCK_LEN_ERR            SDMMC_ERROR_BLOCK_LEN_ERR           /*!< Transferred block length is not allowed for the card or the
+                                                                                        number of transferred bytes does not match the block length   */
+#define HAL_MMC_ERROR_ERASE_SEQ_ERR            SDMMC_ERROR_ERASE_SEQ_ERR           /*!< An error in the sequence of erase command occurs              */
+#define HAL_MMC_ERROR_BAD_ERASE_PARAM          SDMMC_ERROR_BAD_ERASE_PARAM         /*!< An invalid selection for erase groups                         */
+#define HAL_MMC_ERROR_WRITE_PROT_VIOLATION     SDMMC_ERROR_WRITE_PROT_VIOLATION    /*!< Attempt to program a write protect block                      */
+#define HAL_MMC_ERROR_LOCK_UNLOCK_FAILED       SDMMC_ERROR_LOCK_UNLOCK_FAILED      /*!< Sequence or password error has been detected in unlock
+                                                                                        command or if there was an attempt to access a locked card    */
+#define HAL_MMC_ERROR_COM_CRC_FAILED           SDMMC_ERROR_COM_CRC_FAILED          /*!< CRC check of the previous command failed                      */
+#define HAL_MMC_ERROR_ILLEGAL_CMD              SDMMC_ERROR_ILLEGAL_CMD             /*!< Command is not legal for the card state                       */
+#define HAL_MMC_ERROR_CARD_ECC_FAILED          SDMMC_ERROR_CARD_ECC_FAILED         /*!< Card internal ECC was applied but failed to correct the data  */
+#define HAL_MMC_ERROR_CC_ERR                   SDMMC_ERROR_CC_ERR                  /*!< Internal card controller error                                */
+#define HAL_MMC_ERROR_GENERAL_UNKNOWN_ERR      SDMMC_ERROR_GENERAL_UNKNOWN_ERR     /*!< General or unknown error                                      */
+#define HAL_MMC_ERROR_STREAM_READ_UNDERRUN     SDMMC_ERROR_STREAM_READ_UNDERRUN    /*!< The card could not sustain data reading in stream rmode       */
+#define HAL_MMC_ERROR_STREAM_WRITE_OVERRUN     SDMMC_ERROR_STREAM_WRITE_OVERRUN    /*!< The card could not sustain data programming in stream mode    */
+#define HAL_MMC_ERROR_CID_CSD_OVERWRITE        SDMMC_ERROR_CID_CSD_OVERWRITE       /*!< CID/CSD overwrite error                                       */
+#define HAL_MMC_ERROR_WP_ERASE_SKIP            SDMMC_ERROR_WP_ERASE_SKIP           /*!< Only partial address space was erased                         */
+#define HAL_MMC_ERROR_CARD_ECC_DISABLED        SDMMC_ERROR_CARD_ECC_DISABLED       /*!< Command has been executed without using internal ECC          */
+#define HAL_MMC_ERROR_ERASE_RESET              SDMMC_ERROR_ERASE_RESET             /*!< Erase sequence was cleared before executing because an out
+                                                                                        of erase sequence command was received                        */
+#define HAL_MMC_ERROR_AKE_SEQ_ERR              SDMMC_ERROR_AKE_SEQ_ERR             /*!< Error in sequence of authentication                           */
+#define HAL_MMC_ERROR_INVALID_VOLTRANGE        SDMMC_ERROR_INVALID_VOLTRANGE       /*!< Error in case of invalid voltage range                        */
+#define HAL_MMC_ERROR_ADDR_OUT_OF_RANGE        SDMMC_ERROR_ADDR_OUT_OF_RANGE       /*!< Error when addressed block is out of range                    */
+#define HAL_MMC_ERROR_REQUEST_NOT_APPLICABLE   SDMMC_ERROR_REQUEST_NOT_APPLICABLE  /*!< Error when command request is not applicable                  */
+#define HAL_MMC_ERROR_PARAM                    SDMMC_ERROR_INVALID_PARAMETER       /*!< the used parameter is not valid                               */
+#define HAL_MMC_ERROR_UNSUPPORTED_FEATURE      SDMMC_ERROR_UNSUPPORTED_FEATURE     /*!< Error when feature is not insupported                         */
+#define HAL_MMC_ERROR_BUSY                     SDMMC_ERROR_BUSY                    /*!< Error when transfer process is busy                           */
+#define HAL_MMC_ERROR_DMA                      SDMMC_ERROR_DMA                     /*!< Error while DMA transfer                                      */
+#define HAL_MMC_ERROR_TIMEOUT                  SDMMC_ERROR_TIMEOUT                 /*!< Timeout error                                                 */
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define HAL_MMC_ERROR_INVALID_CALLBACK         SDMMC_ERROR_INVALID_PARAMETER       /*!< Invalid callback error                                        */
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group2 MMC context enumeration
+  * @{
+  */
+#define   MMC_CONTEXT_NONE                 ((uint32_t)0x00000000U)  /*!< None                             */
+#define   MMC_CONTEXT_READ_SINGLE_BLOCK    ((uint32_t)0x00000001U)  /*!< Read single block operation      */
+#define   MMC_CONTEXT_READ_MULTIPLE_BLOCK  ((uint32_t)0x00000002U)  /*!< Read multiple blocks operation   */
+#define   MMC_CONTEXT_WRITE_SINGLE_BLOCK   ((uint32_t)0x00000010U)  /*!< Write single block operation     */
+#define   MMC_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U)  /*!< Write multiple blocks operation  */
+#define   MMC_CONTEXT_IT                   ((uint32_t)0x00000008U)  /*!< Process in Interrupt mode        */
+#define   MMC_CONTEXT_DMA                  ((uint32_t)0x00000080U)  /*!< Process in DMA mode              */
+
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group3 MMC Voltage mode
+  * @{
+  */
+/**
+  * @brief
+  */
+#define MMC_HIGH_VOLTAGE_RANGE         0x80FF8000U  /*!< VALUE OF ARGUMENT            */
+#define MMC_DUAL_VOLTAGE_RANGE         0x80FF8080U  /*!< VALUE OF ARGUMENT            */
+#define eMMC_HIGH_VOLTAGE_RANGE        0xC0FF8000U  /*!< for eMMC > 2Gb sector mode   */
+#define eMMC_DUAL_VOLTAGE_RANGE        0xC0FF8080U  /*!< for eMMC > 2Gb sector mode   */
+#define MMC_INVALID_VOLTAGE_RANGE      0x0001FF01U
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group4 MMC Memory Cards
+  * @{
+  */
+#define  MMC_LOW_CAPACITY_CARD     ((uint32_t)0x00000000U)   /*!< MMC Card Capacity <=2Gbytes   */
+#define  MMC_HIGH_CAPACITY_CARD    ((uint32_t)0x00000001U)   /*!< MMC Card Capacity >2Gbytes and <2Tbytes   */
+
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group5 MMC Erase Type
+  * @{
+  */
+#define HAL_MMC_ERASE             0x00000000U  /*!< Erase the erase groups identified by CMD35 & 36                                   */
+#define HAL_MMC_TRIM              0x00000001U  /*!< Erase the write blocks identified by CMD35 & 36                                   */
+#define HAL_MMC_DISCARD           0x00000003U  /*!< Discard the write blocks identified by CMD35 & 36                                 */
+#define HAL_MMC_SECURE_ERASE      0x80000000U  /*!< Perform a secure purge according SRT on the erase groups identified by CMD35 & 36 */
+#define HAL_MMC_SECURE_TRIM_STEP1 0x80000001U  /*!< Mark the write blocks identified by CMD35 & 36 for secure erase                   */
+#define HAL_MMC_SECURE_TRIM_STEP2 0x80008000U  /*!< Perform a secure purge according SRT on the write blocks previously identified    */
+
+#define IS_MMC_ERASE_TYPE(TYPE) (((TYPE) == HAL_MMC_ERASE)             || \
+                                 ((TYPE) == HAL_MMC_TRIM)              || \
+                                 ((TYPE) == HAL_MMC_DISCARD)           || \
+                                 ((TYPE) == HAL_MMC_SECURE_ERASE)      || \
+                                 ((TYPE) == HAL_MMC_SECURE_TRIM_STEP1) || \
+                                 ((TYPE) == HAL_MMC_SECURE_TRIM_STEP2))
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Constansts_Group6 MMC Secure Removal Type
+  * @{
+  */
+#define HAL_MMC_SRT_ERASE                   0x00000001U  /*!< Information removed by an erase                                                                */
+#define HAL_MMC_SRT_WRITE_CHAR_ERASE        0x00000002U  /*!< Information removed by an overwriting with a character followed by an erase                    */
+#define HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM 0x00000004U  /*!< Information removed by an overwriting with a character, its complement then a random character */
+#define HAL_MMC_SRT_VENDOR_DEFINED          0x00000008U  /*!< Information removed using a vendor defined                                                     */
+
+
+#define IS_MMC_SRT_TYPE(TYPE) (((TYPE) == HAL_MMC_SRT_ERASE)                   || \
+                               ((TYPE) == HAL_MMC_SRT_WRITE_CHAR_ERASE)        || \
+                               ((TYPE) == HAL_MMC_SRT_WRITE_CHAR_COMPL_RANDOM) || \
+                               ((TYPE) == HAL_MMC_SRT_VENDOR_DEFINED))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup MMC_Exported_macros MMC Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+/** @brief Reset MMC handle state.
+  * @param  __HANDLE__ MMC Handle.
+  * @retval None
+  */
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           do {                                              \
+                                                               (__HANDLE__)->State = HAL_MMC_STATE_RESET; \
+                                                               (__HANDLE__)->MspInitCallback = NULL;       \
+                                                               (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                             } while(0)
+#else
+#define __HAL_MMC_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_MMC_STATE_RESET)
+#endif
+
+/**
+  * @brief  Enable the MMC device interrupt.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL:   Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL:   Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT:   Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT:   Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR:   Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:    Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:    Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:    Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:    Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DHOLD:      Data transfer Hold interrupt
+  *            @arg SDMMC_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_DABORT:     Data transfer aborted by CMD12 interrupt
+  *            @arg SDMMC_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:    Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:    Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected interrupt
+  *            @arg SDMMC_IT_SDIOIT:     SD I/O interrupt received interrupt
+  *            @arg SDMMC_IT_ACKFAIL:    Boot Acknowledgment received interrupt
+  *            @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+  *            @arg SDMMC_IT_VSWEND:     Voltage switch critical timing section completion interrupt
+  *            @arg SDMMC_IT_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure interrupt
+  *            @arg SDMMC_IT_IDMABTC:    IDMA buffer transfer complete interrupt
+  * @retval None
+  */
+#define __HAL_MMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the MMC device interrupt.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL:   Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL:   Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT:   Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT:   Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR:   Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:    Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:    Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:    Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:    Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DHOLD:      Data transfer Hold interrupt
+  *            @arg SDMMC_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_DABORT:     Data transfer aborted by CMD12 interrupt
+  *            @arg SDMMC_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:    Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:    Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected interrupt
+  *            @arg SDMMC_IT_SDIOIT:     SD I/O interrupt received interrupt
+  *            @arg SDMMC_IT_ACKFAIL:    Boot Acknowledgment received interrupt
+  *            @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+  *            @arg SDMMC_IT_VSWEND:     Voltage switch critical timing section completion interrupt
+  *            @arg SDMMC_IT_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure interrupt
+  *            @arg SDMMC_IT_IDMABTC:    IDMA buffer transfer complete interrupt
+  * @retval None
+  */
+#define __HAL_MMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified MMC flag is set or not.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __FLAG__ specifies the flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL:   Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL:   Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT:   Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT:   Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR:   Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:    Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:    Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:    Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:    Data end (data counter, DATACOUNT, is zero)
+  *            @arg SDMMC_FLAG_DHOLD:      Data transfer Hold
+  *            @arg SDMMC_FLAG_DBCKEND:    Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_DABORT:     Data transfer aborted by CMD12
+  *            @arg SDMMC_FLAG_DPSMACT:    Data path state machine active
+  *            @arg SDMMC_FLAG_CPSMACT:    Command path state machine active
+  *            @arg SDMMC_FLAG_TXFIFOHE:   Transmit FIFO Half Empty
+  *            @arg SDMMC_FLAG_RXFIFOHF:   Receive FIFO Half Full
+  *            @arg SDMMC_FLAG_TXFIFOF:    Transmit FIFO full
+  *            @arg SDMMC_FLAG_RXFIFOF:    Receive FIFO full
+  *            @arg SDMMC_FLAG_TXFIFOE:    Transmit FIFO empty
+  *            @arg SDMMC_FLAG_RXFIFOE:    Receive FIFO empty
+  *            @arg SDMMC_FLAG_BUSYD0:     Inverted value of SDMMC_D0 line (Busy)
+  *            @arg SDMMC_FLAG_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected
+  *            @arg SDMMC_FLAG_SDIOIT:     SD I/O interrupt received
+  *            @arg SDMMC_FLAG_ACKFAIL:    Boot Acknowledgment received
+  *            @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+  *            @arg SDMMC_FLAG_VSWEND:     Voltage switch critical timing section completion
+  *            @arg SDMMC_FLAG_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure
+  *            @arg SDMMC_FLAG_IDMATE:     IDMA transfer error
+  *            @arg SDMMC_FLAG_IDMABTC:    IDMA buffer transfer complete
+  * @retval The new state of MMC FLAG (SET or RESET).
+  */
+#define __HAL_MMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Clear the MMC's pending flags.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL:   Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL:   Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT:   Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT:   Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR:   Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:    Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:    Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:    Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:    Data end (data counter, DATACOUNT, is zero)
+  *            @arg SDMMC_FLAG_DHOLD:      Data transfer Hold
+  *            @arg SDMMC_FLAG_DBCKEND:    Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_DABORT:     Data transfer aborted by CMD12
+  *            @arg SDMMC_FLAG_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected
+  *            @arg SDMMC_FLAG_SDIOIT:     SD I/O interrupt received
+  *            @arg SDMMC_FLAG_ACKFAIL:    Boot Acknowledgment received
+  *            @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+  *            @arg SDMMC_FLAG_VSWEND:     Voltage switch critical timing section completion
+  *            @arg SDMMC_FLAG_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure
+  *            @arg SDMMC_FLAG_IDMATE:     IDMA transfer error
+  *            @arg SDMMC_FLAG_IDMABTC:    IDMA buffer transfer complete
+  * @retval None
+  */
+#define __HAL_MMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Check whether the specified MMC interrupt has occurred or not.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __INTERRUPT__ specifies the SDMMC interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL:   Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL:   Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT:   Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT:   Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR:   Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:    Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:    Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:    Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:    Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DHOLD:      Data transfer Hold interrupt
+  *            @arg SDMMC_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_DABORT:     Data transfer aborted by CMD12 interrupt
+  *            @arg SDMMC_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:    Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:    Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected interrupt
+  *            @arg SDMMC_IT_SDIOIT:     SD I/O interrupt received interrupt
+  *            @arg SDMMC_IT_ACKFAIL:    Boot Acknowledgment received interrupt
+  *            @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+  *            @arg SDMMC_IT_VSWEND:     Voltage switch critical timing section completion interrupt
+  *            @arg SDMMC_IT_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure interrupt
+  *            @arg SDMMC_IT_IDMABTC:    IDMA buffer transfer complete interrupt
+  * @retval The new state of MMC IT (SET or RESET).
+  */
+#define __HAL_MMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Clear the MMC's interrupt pending bits.
+  * @param  __HANDLE__ MMC Handle.
+  * @param  __INTERRUPT__ specifies the interrupt pending bit to clear.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL:   Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL:   Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT:   Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT:   Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR:   Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:    Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:    Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:    Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:    Data end (data counter, DATACOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DHOLD:      Data transfer Hold interrupt
+  *            @arg SDMMC_IT_DBCKEND:    Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_DABORT:     Data transfer aborted by CMD12 interrupt
+  *            @arg SDMMC_IT_TXFIFOHE:   Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF:   Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:    Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:    Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_BUSYD0END:  End of SDMMC_D0 Busy following a CMD response detected interrupt
+  *            @arg SDMMC_IT_SDIOIT:     SD I/O interrupt received interrupt
+  *            @arg SDMMC_IT_ACKFAIL:    Boot Acknowledgment received interrupt
+  *            @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+  *            @arg SDMMC_IT_VSWEND:     Voltage switch critical timing section completion interrupt
+  *            @arg SDMMC_IT_CKSTOP:     SDMMC_CK stopped in Voltage switch procedure interrupt
+  *            @arg SDMMC_IT_IDMABTC:    IDMA buffer transfer complete interrupt
+  * @retval None
+  */
+#define __HAL_MMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Include MMC HAL Extension module */
+#include "stm32h7xx_hal_mmc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MMC_Exported_Functions MMC Exported Functions
+  * @{
+  */
+
+/** @defgroup MMC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_Init(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_InitCard(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_DeInit (MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspInit(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_MspDeInit(MMC_HandleTypeDef *hmmc);
+
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_MMC_Erase(MMC_HandleTypeDef *hmmc, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
+/* Non-Blocking mode: IT */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_IT(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_MMC_ReadBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMC_WriteBlocks_DMA(MMC_HandleTypeDef *hmmc, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+
+void HAL_MMC_IRQHandler(MMC_HandleTypeDef *hmmc);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_MMC_TxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_RxCpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_ErrorCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMC_AbortCallback(MMC_HandleTypeDef *hmmc);
+
+#if defined (USE_HAL_MMC_REGISTER_CALLBACKS) && (USE_HAL_MMC_REGISTER_CALLBACKS == 1U)
+/* MMC callback registering/unregistering */
+HAL_StatusTypeDef HAL_MMC_RegisterCallback  (MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId, pMMC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_MMC_UnRegisterCallback(MMC_HandleTypeDef *hmmc, HAL_MMC_CallbackIDTypeDef CallbackId);
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_ConfigWideBusOperation(MMC_HandleTypeDef *hmmc, uint32_t WideMode);
+HAL_StatusTypeDef HAL_MMC_ConfigSpeedBusOperation(MMC_HandleTypeDef *hmmc, uint32_t SpeedMode);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group4 MMC card related functions
+  * @{
+  */
+HAL_MMC_CardStateTypeDef HAL_MMC_GetCardState(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_GetCardCID(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCIDTypeDef *pCID);
+HAL_StatusTypeDef HAL_MMC_GetCardCSD(MMC_HandleTypeDef *hmmc, HAL_MMC_CardCSDTypeDef *pCSD);
+HAL_StatusTypeDef HAL_MMC_GetCardInfo(MMC_HandleTypeDef *hmmc, HAL_MMC_CardInfoTypeDef *pCardInfo);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group5 Peripheral State and Errors functions
+  * @{
+  */
+HAL_MMC_StateTypeDef HAL_MMC_GetState(MMC_HandleTypeDef *hmmc);
+uint32_t HAL_MMC_GetError(MMC_HandleTypeDef *hmmc);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group6 Peripheral Abort management
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_Abort(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_Abort_IT(MMC_HandleTypeDef *hmmc);
+/**
+  * @}
+  */
+
+/** @defgroup MMC_Exported_Functions_Group7 Peripheral Erase management
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMC_EraseSequence(MMC_HandleTypeDef *hmmc, uint32_t EraseType, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
+HAL_StatusTypeDef HAL_MMC_Sanitize(MMC_HandleTypeDef *hmmc);
+HAL_StatusTypeDef HAL_MMC_ConfigSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t SRTMode);
+HAL_StatusTypeDef HAL_MMC_GetSupportedSecRemovalType(MMC_HandleTypeDef *hmmc, uint32_t *SupportedSRT);
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup MMC_Private_Types MMC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup MMC_Private_Defines MMC Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Variables MMC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Constants MMC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup MMC_Private_Macros MMC Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup MMC_Private_Functions_Prototypes MMC Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup MMC_Private_Functions MMC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_MMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc_ex.h

@@ -0,0 +1,113 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_mmc_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of SD HAL extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_MMC_EX_H
+#define STM32H7xx_HAL_MMC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup MMCEx
+  * @brief SD HAL extended module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup MMCEx_Exported_Types MMCEx Exported Types
+  * @{
+  */
+
+/** @defgroup MMCEx_Exported_Types_Group1 MMC Internal DMA Buffer structure
+  * @{
+  */
+typedef enum
+{
+  MMC_DMA_BUFFER0      = 0x00U,    /*!< selects MMC internal DMA Buffer 0     */
+  MMC_DMA_BUFFER1      = 0x01U,    /*!< selects MMC internal DMA Buffer 1     */
+
+}HAL_MMCEx_DMABuffer_MemoryTypeDef;
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup MMCEx_Exported_Functions MMCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup MMCEx_Exported_Functions_Group1 MultiBuffer functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_MMCEx_ConfigDMAMultiBuffer(MMC_HandleTypeDef *hmmc, uint32_t * pDataBuffer0, uint32_t * pDataBuffer1, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_MMCEx_ReadBlocksDMAMultiBuffer(MMC_HandleTypeDef *hmmc, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMCEx_WriteBlocksDMAMultiBuffer(MMC_HandleTypeDef *hmmc, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_MMCEx_ChangeDMABuffer(MMC_HandleTypeDef *hmmc, HAL_MMCEx_DMABuffer_MemoryTypeDef Buffer, uint32_t *pDataBuffer);
+
+void HAL_MMCEx_Read_DMADoubleBuf0CpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMCEx_Read_DMADoubleBuf1CpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMCEx_Write_DMADoubleBuf0CpltCallback(MMC_HandleTypeDef *hmmc);
+void HAL_MMCEx_Write_DMADoubleBuf1CpltCallback(MMC_HandleTypeDef *hmmc);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_MMCEx_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nand.h

@@ -0,0 +1,367 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_nand.h
+  * @author  MCD Application Team
+  * @brief   Header file of NAND HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_NAND_H
+#define STM32H7xx_HAL_NAND_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_fmc.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NAND
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL NAND State structures definition
+  */
+typedef enum
+{
+  HAL_NAND_STATE_RESET     = 0x00U,  /*!< NAND not yet initialized or disabled */
+  HAL_NAND_STATE_READY     = 0x01U,  /*!< NAND initialized and ready for use   */
+  HAL_NAND_STATE_BUSY      = 0x02U,  /*!< NAND internal process is ongoing     */
+  HAL_NAND_STATE_ERROR     = 0x03U   /*!< NAND error state                     */
+} HAL_NAND_StateTypeDef;
+
+/**
+  * @brief  NAND Memory electronic signature Structure definition
+  */
+typedef struct
+{
+  /*<! NAND memory electronic signature maker and device IDs */
+
+  uint8_t Maker_Id;
+
+  uint8_t Device_Id;
+
+  uint8_t Third_Id;
+
+  uint8_t Fourth_Id;
+} NAND_IDTypeDef;
+
+/**
+  * @brief  NAND Memory address Structure definition
+  */
+typedef struct
+{
+  uint16_t Page;   /*!< NAND memory Page address  */
+
+  uint16_t Plane;   /*!< NAND memory Zone address  */
+
+  uint16_t Block;  /*!< NAND memory Block address */
+
+} NAND_AddressTypeDef;
+
+/**
+  * @brief  NAND Memory info Structure definition
+  */
+typedef struct
+{
+  uint32_t        PageSize;              /*!< NAND memory page (without spare area) size measured in bytes
+                                              for 8 bits adressing or words for 16 bits addressing             */
+
+  uint32_t        SpareAreaSize;         /*!< NAND memory spare area size measured in bytes
+                                              for 8 bits adressing or words for 16 bits addressing             */
+
+  uint32_t        BlockSize;             /*!< NAND memory block size measured in number of pages               */
+
+  uint32_t        BlockNbr;              /*!< NAND memory number of total blocks                               */
+
+  uint32_t        PlaneNbr;              /*!< NAND memory number of planes                                     */
+
+  uint32_t        PlaneSize;             /*!< NAND memory zone size measured in number of blocks               */
+
+  FunctionalState ExtraCommandEnable;    /*!< NAND extra command needed for Page reading mode. This
+                                              parameter is mandatory for some NAND parts after the read
+                                              command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence.
+                                              Example: Toshiba THTH58BYG3S0HBAI6.
+                                              This parameter could be ENABLE or DISABLE
+                                              Please check the Read Mode sequnece in the NAND device datasheet */
+} NAND_DeviceConfigTypeDef;
+
+/**
+  * @brief  NAND handle Structure definition
+  */
+#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
+typedef struct __NAND_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_NAND_REGISTER_CALLBACKS  */
+{
+  FMC_NAND_TypeDef               *Instance;  /*!< Register base address                                 */
+
+  FMC_NAND_InitTypeDef           Init;       /*!< NAND device control configuration parameters          */
+
+  HAL_LockTypeDef                Lock;       /*!< NAND locking object                                   */
+
+  __IO HAL_NAND_StateTypeDef     State;      /*!< NAND device access state                              */
+
+  NAND_DeviceConfigTypeDef       Config;     /*!< NAND phusical characteristic information structure    */
+
+#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
+  void  (* MspInitCallback)        ( struct __NAND_HandleTypeDef * hnand);    /*!< NAND Msp Init callback              */
+  void  (* MspDeInitCallback)      ( struct __NAND_HandleTypeDef * hnand);    /*!< NAND Msp DeInit callback            */
+  void  (* ItCallback)             ( struct __NAND_HandleTypeDef * hnand);    /*!< NAND IT callback                    */
+#endif
+} NAND_HandleTypeDef;
+
+#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL NAND Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_NAND_MSP_INIT_CB_ID       = 0x00U,  /*!< NAND MspInit Callback ID          */
+  HAL_NAND_MSP_DEINIT_CB_ID     = 0x01U,  /*!< NAND MspDeInit Callback ID        */
+  HAL_NAND_IT_CB_ID             = 0x02U   /*!< NAND IT Callback ID               */
+}HAL_NAND_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL NAND Callback pointer definition
+  */
+typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand);
+#endif
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+  * @param  __HANDLE__ specifies the NAND handle.
+  * @retval None
+  */
+#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__)         do {                                             \
+                                                               (__HANDLE__)->State = HAL_NAND_STATE_RESET; \
+                                                               (__HANDLE__)->MspInitCallback = NULL;       \
+                                                               (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                             } while(0)
+#else
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+#endif
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+  * @{
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef  HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+
+HAL_StatusTypeDef  HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig);
+
+HAL_StatusTypeDef  HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+
+void               HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+  * @{
+  */
+
+/* IO operation functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+
+HAL_StatusTypeDef  HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+
+HAL_StatusTypeDef  HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer, uint32_t NumSpareAreaTowrite);
+
+HAL_StatusTypeDef  HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+uint32_t           HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
+/* NAND callback registering/unregistering */
+HAL_StatusTypeDef  HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId, pNAND_CallbackTypeDef pCallback);
+HAL_StatusTypeDef  HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId);
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+
+/* NAND Control functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+  * @{
+  */
+#define NAND_DEVICE                0x80000000UL
+#define NAND_WRITE_TIMEOUT         0x01000000UL
+
+#define CMD_AREA                   (1UL<<16U)  /* A16 = CLE high */
+#define ADDR_AREA                  (1UL<<17U)  /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A            0x00U
+#define NAND_CMD_AREA_B            0x01U
+#define NAND_CMD_AREA_C            0x50U
+#define NAND_CMD_AREA_TRUE1        0x30U
+
+#define NAND_CMD_WRITE0            0x80U
+#define NAND_CMD_WRITE_TRUE1       0x10U
+#define NAND_CMD_ERASE0            0x60U
+#define NAND_CMD_ERASE1            0xD0U
+#define NAND_CMD_READID            0x90U
+#define NAND_CMD_STATUS            0x70U
+#define NAND_CMD_LOCK_STATUS       0x7AU
+#define NAND_CMD_RESET             0xFFU
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS         0x00000100UL
+#define NAND_INVALID_ADDRESS       0x00000200UL
+#define NAND_TIMEOUT_ERROR         0x00000400UL
+#define NAND_BUSY                  0x00000000UL
+#define NAND_ERROR                 0x00000001UL
+#define NAND_READY                 0x00000040UL
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+  * @{
+  */
+
+/**
+  * @brief  NAND memory address computation.
+  * @param  __ADDRESS__ NAND memory address.
+  * @param  __HANDLE__  NAND handle.
+  * @retval NAND Raw address value
+  */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+                         (((__ADDRESS__)->Block + (((__ADDRESS__)->Plane) * ((__HANDLE__)->Config.PlaneSize)))* ((__HANDLE__)->Config.BlockSize)))
+
+/**
+  * @brief  NAND memory Column address computation.
+  * @param  __HANDLE__ NAND handle.
+  * @retval NAND Raw address value
+  */
+#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize)
+
+/**
+  * @brief  NAND memory address cycling.
+  * @param  __ADDRESS__ NAND memory address.
+  * @retval NAND address cycling value.
+  */
+#define ADDR_1ST_CYCLE(__ADDRESS__)       (uint8_t)(__ADDRESS__)              /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 8)       /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 16)      /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 24)      /* 4th addressing cycle */
+
+/**
+  * @brief  NAND memory Columns cycling.
+  * @param  __ADDRESS__ NAND memory address.
+  * @retval NAND Column address cycling value.
+  */
+#define COLUMN_1ST_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) & 0xFFU)    /* 1st Column addressing cycle */
+#define COLUMN_2ND_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 8)       /* 2nd Column addressing cycle */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_nor.h

@@ -0,0 +1,321 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_nor.h
+  * @author  MCD Application Team
+  * @brief   Header file of NOR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                       opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_NOR_H
+#define STM32H7xx_HAL_NOR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_fmc.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NOR
+  * @{
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL SRAM State structures definition
+  */
+typedef enum
+{
+  HAL_NOR_STATE_RESET             = 0x00U,  /*!< NOR not yet initialized or disabled  */
+  HAL_NOR_STATE_READY             = 0x01U,  /*!< NOR initialized and ready for use    */
+  HAL_NOR_STATE_BUSY              = 0x02U,  /*!< NOR internal processing is ongoing   */
+  HAL_NOR_STATE_ERROR             = 0x03U,  /*!< NOR error state                      */
+  HAL_NOR_STATE_PROTECTED         = 0x04U   /*!< NOR NORSRAM device write protected   */
+} HAL_NOR_StateTypeDef;
+
+/**
+  * @brief  FMC NOR Status typedef
+  */
+typedef enum
+{
+  HAL_NOR_STATUS_SUCCESS  = 0U,
+  HAL_NOR_STATUS_ONGOING,
+  HAL_NOR_STATUS_ERROR,
+  HAL_NOR_STATUS_TIMEOUT
+} HAL_NOR_StatusTypeDef;
+
+/**
+  * @brief  FMC NOR ID typedef
+  */
+typedef struct
+{
+  uint16_t Manufacturer_Code;  /*!< Defines the device's manufacturer code used to identify the memory       */
+
+  uint16_t Device_Code1;
+
+  uint16_t Device_Code2;
+
+  uint16_t Device_Code3;       /*!< Defines the device's codes used to identify the memory.
+                                    These codes can be accessed by performing read operations with specific
+                                    control signals and addresses set.They can also be accessed by issuing
+                                    an Auto Select command                                                   */
+} NOR_IDTypeDef;
+
+/**
+  * @brief  FMC NOR CFI typedef
+  */
+typedef struct
+{
+  /*!< Defines the information stored in the memory's Common flash interface
+       which contains a description of various electrical and timing parameters,
+       density information and functions supported by the memory                   */
+
+  uint16_t CFI_1;
+
+  uint16_t CFI_2;
+
+  uint16_t CFI_3;
+
+  uint16_t CFI_4;
+} NOR_CFITypeDef;
+
+/**
+  * @brief  NOR handle Structure definition
+  */
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+typedef struct __NOR_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_NOR_REGISTER_CALLBACKS  */
+
+{
+  FMC_NORSRAM_TypeDef           *Instance;    /*!< Register base address                        */
+
+  FMC_NORSRAM_EXTENDED_TypeDef  *Extended;    /*!< Extended mode register base address          */
+
+  FMC_NORSRAM_InitTypeDef       Init;         /*!< NOR device control configuration parameters  */
+
+  HAL_LockTypeDef               Lock;         /*!< NOR locking object                           */
+
+  __IO HAL_NOR_StateTypeDef     State;        /*!< NOR device access state                      */
+
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+  void  (* MspInitCallback)        ( struct __NOR_HandleTypeDef * hnor);    /*!< NOR Msp Init callback              */
+  void  (* MspDeInitCallback)      ( struct __NOR_HandleTypeDef * hnor);    /*!< NOR Msp DeInit callback            */
+#endif
+} NOR_HandleTypeDef;
+
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL NOR Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_NOR_MSP_INIT_CB_ID       = 0x00U,  /*!< NOR MspInit Callback ID          */
+  HAL_NOR_MSP_DEINIT_CB_ID     = 0x01U   /*!< NOR MspDeInit Callback ID        */
+}HAL_NOR_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL NOR Callback pointer definition
+  */
+typedef void (*pNOR_CallbackTypeDef)(NOR_HandleTypeDef *hnor);
+#endif
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+  * @{
+  */
+/** @brief Reset NOR handle state
+  * @param  __HANDLE__ specifies the NOR handle.
+  * @retval None
+  */
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__)          do {                                             \
+                                                               (__HANDLE__)->State = HAL_NOR_STATE_RESET;  \
+                                                               (__HANDLE__)->MspInitCallback = NULL;       \
+                                                               (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                             } while(0)
+#else
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+#endif
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions NOR Exported Functions
+  * @{
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions
+  * @{
+  */
+
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+
+#if (USE_HAL_NOR_REGISTER_CALLBACKS == 1)
+/* NOR callback registering/unregistering */
+HAL_StatusTypeDef HAL_NOR_RegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId, pNOR_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_NOR_UnRegisterCallback(NOR_HandleTypeDef *hnor, HAL_NOR_CallbackIDTypeDef CallbackId);
+#endif
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions
+  * @{
+  */
+
+/* NOR Control functions  *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions
+  * @{
+  */
+
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef  HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+  * @{
+  */
+/* NOR device IDs addresses */
+#define MC_ADDRESS               ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR        ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR        ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR        ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS             ((uint16_t)0x61)
+#define CFI2_ADDRESS             ((uint16_t)0x62)
+#define CFI3_ADDRESS             ((uint16_t)0x63)
+#define CFI4_ADDRESS             ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT               ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B            ((uint8_t)0x0)
+#define NOR_MEMORY_16B           ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1       ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2       ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3       ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4       ((uint32_t)0x6C000000)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+  * @{
+  */
+/**
+  * @brief  NOR memory address shifting.
+  * @param  __NOR_ADDRESS NOR base address
+  * @param  __NOR_MEMORY_WIDTH_ NOR memory width
+  * @param  __ADDRESS__ NOR memory address
+  * @retval NOR shifted address value
+  */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__)         \
+              ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)?            \
+              ((uint32_t)((__NOR_ADDRESS) + (2U * (__ADDRESS__)))):              \
+              ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__)))))
+
+/**
+  * @brief  NOR memory write data to specified address.
+  * @param  __ADDRESS__ NOR memory address
+  * @param  __DATA__ Data to write
+  * @retval None
+  */
+#define NOR_WRITE(__ADDRESS__, __DATA__)   do{                                                             \
+                                               (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \
+                                               __DSB();                                                    \
+                                             } while(0)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_opamp.h

@@ -0,0 +1,458 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_opamp.h
+  * @author  MCD Application Team
+  * @brief   Header file of OPAMP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_OPAMP_H
+#define STM32H7xx_HAL_OPAMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+                  
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup OPAMP
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  OPAMP Init structure definition  
+  */
+  
+typedef struct
+{
+
+  uint32_t PowerMode;                   /*!< Specifies the power mode Normal or High Speed.
+                                             This parameter must be a value of @ref OPAMP_PowerMode */
+
+  uint32_t Mode;                        /*!< Specifies the OPAMP mode
+                                             This parameter must be a value of @ref OPAMP_Mode 
+                                             mode is either Standalone, - Follower or PGA */
+
+  uint32_t InvertingInput;              /*!< Specifies the inverting input in Standalone & PGA modes
+                                             - In Standalone mode i.e when mode is OPAMP_STANDALONE_MODE
+                                                 This parameter must be a value of @ref OPAMP_InvertingInput 
+                                             - In Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
+                                           & In PGA mode i.e when mode is OPAMP_PGA_MODE 
+                                                 This parameter is Not Applicable */
+
+  uint32_t NonInvertingInput;           /*!< Specifies the non inverting input of the opamp:
+                                             This parameter must be a value of @ref OPAMP_NonInvertingInput */
+
+  uint32_t PgaGain;                     /*!< Specifies the gain in PGA mode 
+                                             i.e. when mode is OPAMP_PGA_MODE. 
+                                             This parameter must be a value of @ref OPAMP_PgaGain */
+
+  uint32_t PgaConnect;                  /*!< Specifies the inverting pin in PGA mode 
+                                             i.e. when mode is OPAMP_PGA_MODE 
+                                             This parameter must be a value of @ref OPAMP_PgaConnect 
+                                             Either: not connected, connected to VINM0, connected to VINM1
+                                             (VINM0 or VINM1 are typically used for external filtering) */
+
+  uint32_t UserTrimming;                /*!< Specifies the trimming mode 
+                                             This parameter must be a value of @ref OPAMP_UserTrimming 
+                                             UserTrimming is either factory or user trimming.*/
+
+  uint32_t TrimmingValueP;              /*!< Specifies the offset trimming value (PMOS) in Normal Mode
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31.
+                                             16 is typical default value */
+
+  uint32_t TrimmingValueN;              /*!< Specifies the offset trimming value (NMOS) in Normal Mode
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31.
+                                             16 is typical default value */
+
+  uint32_t TrimmingValuePHighSpeed;      /*!< Specifies the offset trimming value (PMOS) in High Speed Mode
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER.
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31.
+                                             16 is typical default value */
+
+  uint32_t TrimmingValueNHighSpeed;      /*!< Specifies the offset trimming value (NMOS) in High Speed Mode
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 0 and Max_Data = 31.
+                                             16 is typical default value */
+
+}OPAMP_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+
+typedef enum
+{
+  HAL_OPAMP_STATE_RESET               = 0x00000000U, /*!< OPAMP is not yet Initialized          */
+
+  HAL_OPAMP_STATE_READY               = 0x00000001U, /*!< OPAMP is initialized and ready for use */
+  HAL_OPAMP_STATE_CALIBBUSY           = 0x00000002U, /*!< OPAMP is enabled in auto calibration mode */
+
+  HAL_OPAMP_STATE_BUSY                = 0x00000004U, /*!< OPAMP is enabled and running in normal mode */
+  HAL_OPAMP_STATE_BUSYLOCKED          = 0x00000005U  /*!< OPAMP is locked
+                                                         only system reset allows reconfiguring the opamp. */
+
+}HAL_OPAMP_StateTypeDef;
+
+/** 
+  * @brief OPAMP Handle Structure definition
+  */ 
+#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
+typedef struct __OPAMP_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
+{
+  OPAMP_TypeDef                 *Instance;                    /*!< OPAMP instance's registers base address */
+  OPAMP_InitTypeDef              Init;                         /*!< OPAMP required parameters */
+  HAL_StatusTypeDef              Status;                       /*!< OPAMP peripheral status   */
+  HAL_LockTypeDef                Lock;                         /*!< Locking object          */
+  __IO HAL_OPAMP_StateTypeDef    State;                        /*!< OPAMP communication state */
+
+#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
+void (* MspInitCallback)                (struct __OPAMP_HandleTypeDef *hopamp);
+void (* MspDeInitCallback)              (struct __OPAMP_HandleTypeDef *hopamp); 
+#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ 
+} OPAMP_HandleTypeDef;
+
+/** 
+  * @brief HAl_OPAMP_TrimmingValueTypeDef definition 
+  */ 
+
+typedef  uint32_t HAL_OPAMP_TrimmingValueTypeDef;
+
+/**
+  * @}
+  */
+
+#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL OPAMP Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_OPAMP_MSPINIT_CB_ID                     = 0x01U,  /*!< OPAMP MspInit Callback ID           */
+  HAL_OPAMP_MSPDEINIT_CB_ID                   = 0x02U,  /*!< OPAMP MspDeInit Callback ID         */
+  HAL_OPAMP_ALL_CB_ID                         = 0x03U   /*!< OPAMP All ID                        */
+}HAL_OPAMP_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL OPAMP Callback pointer definition
+  */
+typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp);
+#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
+    
+    
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
+  * @{
+  */
+
+/** @defgroup OPAMP_Mode OPAMP Mode
+  * @{
+  */
+#define OPAMP_STANDALONE_MODE             0x00000000U                                  /*!< standalone mode */
+#define OPAMP_PGA_MODE                    OPAMP_CSR_VMSEL_1                            /*!< PGA mode */
+#define OPAMP_FOLLOWER_MODE               (OPAMP_CSR_VMSEL_1 | OPAMP_CSR_VMSEL_0)      /*!< follower mode */
+    
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_IO0         0x00000000U                /*!< OPAMP non-inverting input connected to dedicated IO pin */
+#define OPAMP_NONINVERTINGINPUT_DAC_CH      OPAMP_CSR_VPSEL_0          /*!< OPAMP non-inverting input connected internally to DAC channel */
+#if defined(DAC2)
+#define OPAMP_NONINVERTINGINPUT_DAC2_CH     OPAMP_CSR_VPSEL_1         /*!< Only OPAMP2 non-inverting input connected internally to DAC2 channel */
+#endif /* DAC2 */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
+  * @{
+  */
+
+#define OPAMP_INVERTINGINPUT_IO0               0x00000000U                            /*!< OPAMP inverting input connected to dedicated IO pin */
+#define OPAMP_INVERTINGINPUT_IO1               OPAMP_CSR_VMSEL_0                      /*!< OPAMP inverting input connected to dedicated IO pin */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PgaConnect OPAMP Pga Connect
+  * @{
+  */
+
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_NO                0x00000000U                                /*!< In PGA mode, the inverting input is not connected */
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0               OPAMP_CSR_PGGAIN_2                         /*!< In PGA mode, the inverting input is connected to VINM0 */
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_BIAS          OPAMP_CSR_PGGAIN_3                         /*!< In PGA mode, the inverting input is connected to VINM0 or bias */
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_IO1_BIAS      (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3)  /*!< In PGA mode, the inverting input is connected to VINM0 or bias , VINM1 connected for filtering */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
+  * @{
+  */
+
+#define OPAMP_PGA_GAIN_2_OR_MINUS_1               0x00000000U                                 /*!< PGA gain could be 2 or -1   */
+#define OPAMP_PGA_GAIN_4_OR_MINUS_3               OPAMP_CSR_PGGAIN_0                          /*!< PGA gain could be 4 or -3   */
+#define OPAMP_PGA_GAIN_8_OR_MINUS_7               OPAMP_CSR_PGGAIN_1                          /*!< PGA gain could be 8 or -7   */
+#define OPAMP_PGA_GAIN_16_OR_MINUS_15             (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1)   /*!< PGA gain could be 16 or -15 */
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PowerMode OPAMP PowerMode
+  * @{
+  */
+#define OPAMP_POWERMODE_NORMAL         0x00000000U
+#define OPAMP_POWERMODE_HIGHSPEED      OPAMP_CSR_OPAHSM
+
+/**
+  * @}
+  */
+
+
+/** @defgroup OPAMP_VREF OPAMP VREF
+  * @{
+  */
+
+#define OPAMP_VREF_3VDDA                     0x00000000U                 /*!< OPAMP Vref = 3.3% VDDA */
+#define OPAMP_VREF_10VDDA                    OPAMP_CSR_CALSEL_0          /*!< OPAMP Vref = 10% VDDA  */
+#define OPAMP_VREF_50VDDA                    OPAMP_CSR_CALSEL_1          /*!< OPAMP Vref = 50% VDDA  */
+#define OPAMP_VREF_90VDDA                    OPAMP_CSR_CALSEL            /*!< OPAMP Vref = 90% VDDA  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
+  * @{
+  */
+#define OPAMP_TRIMMING_FACTORY         0x00000000U                             /*!< Factory trimming */
+#define OPAMP_TRIMMING_USER            OPAMP_CSR_USERTRIM                      /*!< User trimming */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
+  * @{
+  */
+#define OPAMP_FACTORYTRIMMING_DUMMY    0xFFFFFFFFU                          /*!< Dummy value if trimming value could not be retrieved */
+
+#define OPAMP_FACTORYTRIMMING_N        0x00000000U                          /*!< Offset trimming N */
+#define OPAMP_FACTORYTRIMMING_P        0x00000001U                          /*!< Offset trimming P */
+
+/**
+  * @}
+  */
+
+ /**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup OPAMP_Private_Constants OPAMP Private Constants
+  * @brief   OPAMP Private constants and defines
+  * @{
+  */
+
+/* NONINVERTING bit position in OTR & HSOTR */
+#define OPAMP_INPUT_NONINVERTING           (8U)  /*!< Non inverting input */  
+
+/* Offset trimming time: during calibration, minimum time needed between two  */
+/* steps to have 1 mV accuracy.                                               */
+/* Refer to datasheet, electrical characteristics: parameter tOFFTRIM Typ=2ms.*/
+/* Unit: ms.                                                                  */
+#define OPAMP_TRIMMING_DELAY               (2U)
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
+  * @{
+  */
+
+/** @brief Reset OPAMP handle state.
+  * @param  __HANDLE__: OPAMP handle.
+  * @retval None
+  */
+#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
+
+/**
+  * @}
+  */ 
+
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup OPAMP_Private_Macros OPAMP Private Macros
+  * @{
+  */
+
+#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
+                                               ((INPUT) == OPAMP_PGA_MODE) || \
+                                               ((INPUT) == OPAMP_FOLLOWER_MODE))
+
+#define IS_OPAMP_INVERTING_INPUT_STANDALONE(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
+                                                    ((INPUT) == OPAMP_INVERTINGINPUT_IO1))
+
+#if defined(DAC2)
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC2_CH))
+#else 
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_DAC_CH))
+#endif /* DAC2 */
+
+#define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_NO)  || \
+                                      ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0) || \
+                                      ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_BIAS) || \
+                                      ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0_IO1_BIAS))
+
+#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2_OR_MINUS_1) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_4_OR_MINUS_3) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_8_OR_MINUS_7) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_16_OR_MINUS_15))
+
+
+#define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA)  || \
+                             ((VREF) == OPAMP_VREF_10VDDA) || \
+                             ((VREF) == OPAMP_VREF_50VDDA) || \
+                             ((VREF) == OPAMP_VREF_90VDDA))
+
+#define IS_OPAMP_POWERMODE(TRIMMING) (((TRIMMING) == OPAMP_POWERMODE_NORMAL) || \
+                                      ((TRIMMING) == OPAMP_POWERMODE_HIGHSPEED) )
+
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+                                     ((TRIMMING) == OPAMP_TRIMMING_USER))
+
+
+#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU)
+
+#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
+                                             ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
+
+/**
+  * @}
+  */ 
+
+/* Include OPAMP HAL Extended module */
+#include "stm32h7xx_hal_opamp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMP_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group2
+  * @{
+  */
+
+/* I/O operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); 
+
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group3
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+#if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1)
+/* OPAMP callback registering/unregistering */
+HAL_StatusTypeDef HAL_OPAMP_RegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackId, pOPAMP_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_OPAMP_UnRegisterCallback (OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackId);
+#endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */
+HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
+HAL_OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
+
+/**
+  * @}
+  */
+
+/** @addtogroup OPAMP_Exported_Functions_Group4
+  * @{
+  */
+
+/* Peripheral State functions  **************************************************/
+HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_OPAMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_opamp_ex.h

@@ -0,0 +1,83 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_opamp_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of OPAMP HAL Extended module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_OPAMP_EX_H
+#define STM32H7xx_HAL_OPAMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup OPAMPEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMPEx_Exported_Functions OPAMPEx Exported Functions
+  * @{
+  */
+
+/* Extended IO operation functions  *****************************************************/
+/** @addtogroup OPAMPEx_Exported_Functions_Group1 
+  * @{
+  */
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2); 
+
+/**
+  * @}
+  */
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup OPAMPEx_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_OPAMPEx_Unlock(OPAMP_HandleTypeDef *hopamp); 
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_OPAMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_otfdec.h

@@ -0,0 +1,477 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_otfdec.h
+  * @author  MCD Application Team
+  * @brief   Header file of OTFDEC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_OTFDEC_H
+#define STM32H7xx_HAL_OTFDEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+#if defined(OTFDEC1)
+
+/** @addtogroup OTFDEC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup OTFDEC_Exported_Types OTFDEC Exported Types
+  * @{
+  */
+
+/** @defgroup OTFDEC_Exported_Types_Group1 OTFDEC region configuration definitions
+  * @{
+  */
+
+/**
+  * @brief OTFDEC region configuration structure definition
+  */
+typedef struct
+{
+  uint32_t          Nonce[2];        /*!< OTFDEC region nonce */
+
+  uint32_t          StartAddress;    /*!< OTFDEC region start address */
+
+  uint32_t          EndAddress;      /*!< OTFDEC region end address */
+
+  uint16_t          Version;         /*!< OTFDEC region firmware version */
+
+}OTFDEC_RegionConfigTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Exported_Types_Group2 OTFDEC Peripheral handle definitions
+  * @{
+  */
+
+/**
+  * @brief OTFDEC states structure definition
+  */
+typedef enum
+{
+  HAL_OTFDEC_STATE_RESET             = 0x00U,  /*!< OTFDEC not yet initialized or disabled */
+  HAL_OTFDEC_STATE_READY             = 0x01U,  /*!< OTFDEC initialized and ready for use   */
+  HAL_OTFDEC_STATE_BUSY              = 0x02U,  /*!< OTFDEC internal processing is ongoing  */
+}HAL_OTFDEC_StateTypeDef;
+
+/**
+  * @brief OTFDEC handle structure definition
+  */
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+typedef struct __OTFDEC_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+{
+  OTFDEC_TypeDef             *Instance;  /*!< OTFDEC registers base address */
+
+  HAL_OTFDEC_StateTypeDef    State;      /*!< OTFDEC state */
+
+  HAL_LockTypeDef            Lock;       /*!< OTFDEC locking object */
+
+  __IO uint32_t              ErrorCode;  /*!< OTFDEC error code */
+
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+  void (* ErrorCallback)(struct __OTFDEC_HandleTypeDef *hotfdec);     /*!< OTFDEC error callback */
+
+  void (* MspInitCallback)(struct __OTFDEC_HandleTypeDef *hotfdec);   /*!< OTFDEC Msp Init callback */
+
+  void (* MspDeInitCallback)(struct __OTFDEC_HandleTypeDef *hotfdec); /*!< OTFDEC Msp DeInit callback */
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+
+}OTFDEC_HandleTypeDef;
+
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+/**
+  * @brief  HAL OTFDEC Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_OTFDEC_ERROR_CB_ID       = 0x00U,  /*!< OTFDEC error callback ID      */
+  HAL_OTFDEC_MSPINIT_CB_ID     = 0x01U,  /*!< OTFDEC Msp DeInit callback ID */
+  HAL_OTFDEC_MSPDEINIT_CB_ID   = 0x02U   /*!< OTFDEC Msp DeInit callback ID */
+} HAL_OTFDEC_CallbackIDTypeDef;
+
+/**
+  * @brief  HAL OTFDEC Callback pointer definition
+  */
+typedef  void (*pOTFDEC_CallbackTypeDef)(OTFDEC_HandleTypeDef *hotfdec); /*!< pointer to a OTFDEC callback function */
+
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup OTFDEC_Exported_Constants OTFDEC Exported Constants
+  * @{
+  */
+
+/** @defgroup OTFDEC_Interrupts    OTFDEC Interrupts
+  * @{
+  */
+#define OTFDEC_SEC_ERROR_INT     (OTFDEC_IER_SEIE                                  )  /*!< OTFDEC security error interrupt                  */
+#define OTFDEC_EXE_ERROR_INT     (               OTFDEC_IER_XONEIE                 )  /*!< OTFDEC execution error interrupt                 */
+#define OTFDEC_KEY_ERROR_INT     (                                  OTFDEC_IER_KEIE)  /*!< OTFDEC key error interrupt                       */
+#define OTFDEC_SEC_EXE_ERROR_INT (OTFDEC_IER_SEIE|OTFDEC_IER_XONEIE                )  /*!< OTFDEC security and execution errors interrupts  */
+#define OTFDEC_SEC_KEY_ERROR_INT (OTFDEC_IER_SEIE|                  OTFDEC_IER_KEIE)  /*!< OTFDEC security and key errors interrupts        */
+#define OTFDEC_EXE_KEY_ERROR_INT (                OTFDEC_IER_XONEIE|OTFDEC_IER_KEIE)  /*!< OTFDEC execution and key errors interrupts       */
+#define OTFDEC_ALL_INT           (OTFDEC_IER_SEIE|OTFDEC_IER_XONEIE|OTFDEC_IER_KEIE)  /*!< OTFDEC all interrupts                            */
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Region_Enable   OTFDEC Region Enable
+  * @{
+  */
+#define OTFDEC_REG_CONFIGR_REG_DISABLE   0x00000000U                /*!< OTFDEC region encryption or on-the-fly decryption disable */
+#define OTFDEC_REG_CONFIGR_REG_ENABLE    OTFDEC_REG_CONFIGR_REG_EN  /*!< OTFDEC region encryption or on-the-fly decryption enable  */
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Region_Configuration_Lock    OTFDEC Region Configuration Lock
+  * @{
+  */
+#define OTFDEC_REG_CONFIGR_LOCK_DISABLE   0x00000000U                     /*!< OTFDEC region configuration lock disable */
+#define OTFDEC_REG_CONFIGR_LOCK_ENABLE    OTFDEC_REG_CONFIGR_CONFIGLOCK   /*!< OTFDEC region configuration lock enable  */
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Region_Operating_Mode    OTFDEC Region Operating Mode
+  * @{
+  */
+#define OTFDEC_REG_MODE_INSTRUCTION_ACCESSES_ONLY              0x00000000U                /*!< Only instruction accesses are decrypted                                   */
+#define OTFDEC_REG_MODE_DATA_ACCESSES_ONLY                     OTFDEC_REG_CONFIGR_MODE_0  /*!< Only data accesses are decrypted                                          */
+#define OTFDEC_REG_MODE_INSTRUCTION_OR_DATA_ACCESSES           OTFDEC_REG_CONFIGR_MODE_1  /*!< All read accesses are decrypted                                           */
+#define OTFDEC_REG_MODE_INSTRUCTION_ACCESSES_ONLY_WITH_CIPHER  OTFDEC_REG_CONFIGR_MODE    /*!< Only instruction accesses are decrypted with proprietary cipher activated */
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Error_Definition   OTFDEC Error Definition
+  * @{
+  */
+#define  HAL_OTFDEC_ERROR_NONE             ((uint32_t)0x00000000U)    /*!< No error                         */
+#define  HAL_OTFDEC_SECURITY_ERROR         ((uint32_t)0x00000001U)    /*!< Security error                   */
+#define  HAL_OTFDEC_EXECUTE_ERROR          ((uint32_t)0x00000002U)    /*!< Execute-only Execute-Never error */
+#define  HAL_OTFDEC_KEY_ERROR              ((uint32_t)0x00000004U)    /*!< Key error                        */
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+#define HAL_OTFDEC_ERROR_INVALID_CALLBACK  ((uint32_t)0x00000008U)   /*!< Invalid Callback error            */
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/** @defgroup OTFDEC_Regions_Index   OTFDEC Regions Index
+  * @{
+  */
+#define  OTFDEC_REGION1            ((uint32_t)0x00000000U)    /*!< OTFDEC region 1 */
+#define  OTFDEC_REGION2            ((uint32_t)0x00000001U)    /*!< OTFDEC region 2 */
+#define  OTFDEC_REGION3            ((uint32_t)0x00000002U)    /*!< OTFDEC region 3 */
+#define  OTFDEC_REGION4            ((uint32_t)0x00000003U)    /*!< OTFDEC region 4 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup OTFDEC_Exported_Macros OTFDEC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset OTFDEC handle state.
+  * @param  __HANDLE__ pointer to an OTFDEC_HandleTypeDef structure that contains
+  *         the configuration information for OTFDEC module
+  * @retval None
+  */
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+#define __HAL_OTFDEC_RESET_HANDLE_STATE(__HANDLE__)                            \
+  do{                                                                          \
+    (__HANDLE__)->State = HAL_OTFDEC_STATE_RESET;                              \
+    (__HANDLE__)->MspInitCallback = NULL;                                      \
+    (__HANDLE__)->MspDeInitCallback = NULL;                                    \
+  } while(0)
+#else
+#define __HAL_OTFDEC_RESET_HANDLE_STATE(__HANDLE__)                            \
+  ((__HANDLE__)->State = HAL_OTFDEC_STATE_RESET)
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+
+/**
+  * @brief  Enable OTFDEC peripheral interrupts combination
+  * @param  __HANDLE__ pointer to an OTFDEC_HandleTypeDef structure that contains
+  *         the configuration information for OTFDEC module
+  * @param  __INTERRUPT__ mask on enabled interrupts
+  *          This parameter can be one of the following values:
+  *            @arg @ref OTFDEC_SEC_ERROR_INT        OTFDEC security error interrupt
+  *            @arg @ref OTFDEC_EXE_ERROR_INT        OTFDEC execution error interrupt
+  *            @arg @ref OTFDEC_KEY_ERROR_INT        OTFDEC key error interrupt
+  *            @arg @ref OTFDEC_SEC_EXE_ERROR_INT    OTFDEC security and execution errors interrupts
+  *            @arg @ref OTFDEC_SEC_KEY_ERROR_INT    OTFDEC security and key errors interrupts
+  *            @arg @ref OTFDEC_EXE_KEY_ERROR_INT    OTFDEC execution and key errors interrupts
+  *            @arg @ref OTFDEC_ALL_INT              OTFDEC all interrupts
+  * @retval None
+  */
+#define __HAL_OTFDEC_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT(((__HANDLE__)->Instance->IER), (__INTERRUPT__))
+
+/**
+  * @brief  Disable OTFDEC peripheral interrupts combination
+  * @param  __HANDLE__ pointer to an OTFDEC_HandleTypeDef structure that contains
+  *         the configuration information for OTFDEC module
+  * @param  __INTERRUPT__ mask on disabled interrupts
+  *          This parameter can be one of the following values:
+  *            @arg @ref OTFDEC_SEC_ERROR_INT        OTFDEC security error interrupt
+  *            @arg @ref OTFDEC_EXE_ERROR_INT        OTFDEC execution error interrupt
+  *            @arg @ref OTFDEC_KEY_ERROR_INT        OTFDEC key error interrupt
+  *            @arg @ref OTFDEC_SEC_EXE_ERROR_INT    OTFDEC security and execution errors interrupts
+  *            @arg @ref OTFDEC_SEC_KEY_ERROR_INT    OTFDEC security and key errors interrupts
+  *            @arg @ref OTFDEC_EXE_KEY_ERROR_INT    OTFDEC execution and key errors interrupts
+  *            @arg @ref OTFDEC_ALL_INT              OTFDEC all interrupts
+  * @retval None
+  */
+#define __HAL_OTFDEC_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT(((__HANDLE__)->Instance->IER), (__INTERRUPT__))
+
+  /** @brief  Check whether the specified combination of OTFDEC interrupt flags is set or not.
+  * @param  __HANDLE__ pointer to an OTFDEC_HandleTypeDef structure that contains
+  *         the configuration information for OTFDEC module
+  * @param  __FLAG__ mask on combination of interrupts flags
+  *          This parameter can be one of the following values:
+  *            @arg @ref OTFDEC_SEC_ERROR_INT        OTFDEC security error interrupt flag
+  *            @arg @ref OTFDEC_EXE_ERROR_INT        OTFDEC execution error interrupt flag
+  *            @arg @ref OTFDEC_KEY_ERROR_INT        OTFDEC key error interrupt flag
+  *            @arg @ref OTFDEC_SEC_EXE_ERROR_INT    OTFDEC security and execution errors interrupts flags
+  *            @arg @ref OTFDEC_SEC_KEY_ERROR_INT    OTFDEC security and key errors interrupts flags
+  *            @arg @ref OTFDEC_EXE_KEY_ERROR_INT    OTFDEC execution and key errors interrupts flag
+  *            @arg @ref OTFDEC_ALL_INT              OTFDEC all interrupts flags
+ * @retval The state of __FLAG__ (TRUE or FALSE).
+  */
+  #define __HAL_OTFDEC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the specified combination of OTFDEC interrupt flags.
+  * @param  __HANDLE__ pointer to an OTFDEC_HandleTypeDef structure that contains
+  *         the configuration information for OTFDEC module
+  * @param  __FLAG__ mask on combination of interrupts flags
+  *          This parameter can be one of the following values:
+  *            @arg @ref OTFDEC_SEC_ERROR_INT        OTFDEC security error interrupt flag
+  *            @arg @ref OTFDEC_EXE_ERROR_INT        OTFDEC execution error interrupt flag
+  *            @arg @ref OTFDEC_KEY_ERROR_INT        OTFDEC key error interrupt flag
+  *            @arg @ref OTFDEC_SEC_EXE_ERROR_INT    OTFDEC security and execution errors interrupts flags
+  *            @arg @ref OTFDEC_SEC_KEY_ERROR_INT    OTFDEC security and key errors interrupts flags
+  *            @arg @ref OTFDEC_EXE_KEY_ERROR_INT    OTFDEC execution and key errors interrupts flag
+  *            @arg @ref OTFDEC_ALL_INT              OTFDEC all interrupts flags
+  * @retval None
+  */
+#define __HAL_OTFDEC_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT((__HANDLE__)->Instance->ICR, (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup OTFDEC_Exported_Functions OTFDEC Exported Functions
+  * @{
+  */
+
+/** @addtogroup OTFDEC_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_OTFDEC_Init(OTFDEC_HandleTypeDef *hotfdec);
+HAL_StatusTypeDef HAL_OTFDEC_DeInit(OTFDEC_HandleTypeDef *hotfdec);
+void HAL_OTFDEC_MspInit(OTFDEC_HandleTypeDef *hotfdec);
+void HAL_OTFDEC_MspDeInit(OTFDEC_HandleTypeDef *hotfdec);
+
+#if (USE_HAL_OTFDEC_REGISTER_CALLBACKS == 1)
+/* Callbacks Register/UnRegister functions  ***********************************/
+HAL_StatusTypeDef HAL_OTFDEC_RegisterCallback(OTFDEC_HandleTypeDef *hotfdec, HAL_OTFDEC_CallbackIDTypeDef CallbackID,
+                                           pOTFDEC_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_OTFDEC_UnRegisterCallback(OTFDEC_HandleTypeDef *hotfdec, HAL_OTFDEC_CallbackIDTypeDef CallbackID);
+#endif /* USE_HAL_OTFDEC_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+
+/** @addtogroup OTFDEC_Exported_Functions_Group2 OTFDEC IRQ handler management
+  * @{
+  */
+void HAL_OTFDEC_IRQHandler(OTFDEC_HandleTypeDef *hotfdec);
+void HAL_OTFDEC_ErrorCallback(OTFDEC_HandleTypeDef *hotfdec);
+/**
+  * @}
+  */
+
+/** @addtogroup OTFDEC_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_OTFDEC_RegionKeyLock(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex);
+HAL_StatusTypeDef HAL_OTFDEC_RegionSetKey(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex, uint32_t *pKey);
+HAL_StatusTypeDef HAL_OTFDEC_RegionSetMode(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex, uint32_t mode);
+HAL_StatusTypeDef HAL_OTFDEC_RegionConfig(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex, OTFDEC_RegionConfigTypeDef *Config, uint32_t lock);
+uint32_t HAL_OTFDEC_KeyCRCComputation(uint32_t *pKey);
+HAL_StatusTypeDef HAL_OTFDEC_RegionEnable(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex);
+HAL_StatusTypeDef HAL_OTFDEC_RegionDisable(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex);
+/**
+  * @}
+  */
+
+/** @addtogroup @addtogroup OTFDEC_Exported_Functions_Group4 Peripheral State and Status functions
+  * @{
+  */
+HAL_OTFDEC_StateTypeDef HAL_OTFDEC_GetState(OTFDEC_HandleTypeDef *hotfdec);
+uint32_t HAL_OTFDEC_RegionGetKeyCRC(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex);
+HAL_StatusTypeDef HAL_OTFDEC_RegionGetConfig(OTFDEC_HandleTypeDef *hotfdec, uint32_t RegionIndex, OTFDEC_RegionConfigTypeDef *Config);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup OTFDEC_Private_Types OTFDEC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup OTFDEC_Private_Variables OTFDEC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup OTFDEC_Private_Constants OTFDEC Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup OTFDEC_Private_Macros OTFDEC Private Macros
+  * @{
+  */
+
+/**
+  * @brief Verify the OTFDEC peripheral interrupts parameter.
+  * @param __INT__ OTFDEC peripheral set of interrupts parameter
+  * @retval SET (__INT__ is valid) or RESET (__INT__ is invalid)
+  */
+#define IS_OTFDEC_INTERRUPTS(__INT__) (((__INT__) == OTFDEC_SEC_ERROR_INT)     || \
+                                       ((__INT__) == OTFDEC_EXE_ERROR_INT)     || \
+                                       ((__INT__) == OTFDEC_KEY_ERROR_INT)     || \
+                                       ((__INT__) == OTFDEC_SEC_EXE_ERROR_INT) || \
+                                       ((__INT__) == OTFDEC_SEC_KEY_ERROR_INT) || \
+                                       ((__INT__) == OTFDEC_EXE_KEY_ERROR_INT) || \
+                                       ((__INT__) == OTFDEC_ALL_INT)  )
+
+/**
+  * @brief Verify the OTFDEC region configuration lock parameter.
+  * @param __LOCK__ OTFDEC region lock parameter.
+  * @retval SET (__LOCK__ is valid) or RESET (__LOCK__ is invalid)
+  */
+#define IS_OTFDEC_REGION_CONFIG_LOCK(__LOCK__) (((__LOCK__) == OTFDEC_REG_CONFIGR_LOCK_DISABLE) || \
+                                                ((__LOCK__) == OTFDEC_REG_CONFIGR_LOCK_ENABLE)  )
+
+/**
+  * @brief Verify the OTFDEC region operating mode.
+  * @param __MODE__ OTFDEC region operating mode parameter.
+  * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+  */
+#define IS_OTFDEC_REGION_OPERATING_MODE(__MODE__) (((__MODE__) == OTFDEC_REG_MODE_INSTRUCTION_ACCESSES_ONLY)    || \
+                                                   ((__MODE__) == OTFDEC_REG_MODE_DATA_ACCESSES_ONLY)           || \
+                                                   ((__MODE__) == OTFDEC_REG_MODE_INSTRUCTION_OR_DATA_ACCESSES) || \
+                                                   ((__MODE__) == OTFDEC_REG_MODE_INSTRUCTION_ACCESSES_ONLY_WITH_CIPHER))
+
+/**
+  * @brief Verify the OTFDEC region index.
+  * @param __INDEX__ OTFDEC region index
+  * @retval SET (__INDEX__ is valid) or RESET (__INDEX__ is invalid)
+  */
+#define IS_OTFDEC_REGIONINDEX(__INDEX__) (((__INDEX__) == OTFDEC_REGION1)     || \
+                                          ((__INDEX__) == OTFDEC_REGION2)     || \
+                                          ((__INDEX__) == OTFDEC_REGION3)     || \
+                                          ((__INDEX__) == OTFDEC_REGION4)  )
+
+/**
+  * @brief Verify the OTFDEC configuration attributes.
+  * @param __ATTRIBUTE__ OTFDEC region index
+  * @retval SET (__ATTRIBUTE__ is valid) or RESET (__ATTRIBUTE__ is invalid)
+  */
+#define IS_OTFDEC_ATTRIBUTE(__ATTRIBUTE__) (((__ATTRIBUTE__) == OTFDEC_ATTRIBUTE_PRIV)   || \
+                                            ((__ATTRIBUTE__) == OTFDEC_ATTRIBUTE_NPRIV)  )
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup OTFDEC_Private_Functions OTFDEC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* OTFDEC1 */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_OTFDEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd.h

@@ -0,0 +1,428 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_PCD_H
+#define STM32H7xx_HAL_PCD_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_usb.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+
+/**
+  * @brief  PCD State structure definition
+  */
+typedef enum
+{
+  HAL_PCD_STATE_RESET   = 0x00,
+  HAL_PCD_STATE_READY   = 0x01,
+  HAL_PCD_STATE_ERROR   = 0x02,
+  HAL_PCD_STATE_BUSY    = 0x03,
+  HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum
+{
+  LPM_L0 = 0x00, /* on */
+  LPM_L1 = 0x01, /* LPM L1 sleep */
+  LPM_L2 = 0x02, /* suspend */
+  LPM_L3 = 0x03, /* off */
+} PCD_LPM_StateTypeDef;
+
+typedef enum
+{
+  PCD_LPM_L0_ACTIVE = 0x00, /* on */
+  PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+} PCD_LPM_MsgTypeDef;
+
+typedef enum
+{
+  PCD_BCD_ERROR                     = 0xFF,
+  PCD_BCD_CONTACT_DETECTION         = 0xFE,
+  PCD_BCD_STD_DOWNSTREAM_PORT       = 0xFD,
+  PCD_BCD_CHARGING_DOWNSTREAM_PORT  = 0xFC,
+  PCD_BCD_DEDICATED_CHARGING_PORT   = 0xFB,
+  PCD_BCD_DISCOVERY_COMPLETED       = 0x00,
+
+} PCD_BCD_MsgTypeDef;
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef;
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/**
+  * @brief  PCD Handle Structure definition
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+typedef struct __PCD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+{
+  PCD_TypeDef             *Instance;   /*!< Register base address             */
+  PCD_InitTypeDef         Init;        /*!< PCD required parameters           */
+  __IO uint8_t            USB_Address; /*!< USB Address                       */
+  PCD_EPTypeDef           IN_ep[16];   /*!< IN endpoint parameters            */
+  PCD_EPTypeDef           OUT_ep[16];  /*!< OUT endpoint parameters           */
+  HAL_LockTypeDef         Lock;        /*!< PCD peripheral status             */
+  __IO PCD_StateTypeDef   State;       /*!< PCD communication state           */
+  __IO  uint32_t          ErrorCode;   /*!< PCD Error code                    */
+  uint32_t                Setup[12];   /*!< Setup packet buffer               */
+  PCD_LPM_StateTypeDef    LPM_State;   /*!< LPM State                         */
+  uint32_t                BESL;
+
+
+  uint32_t lpm_active;                 /*!< Enable or disable the Link Power Management .
+                                       This parameter can be set to ENABLE or DISABLE        */
+
+  uint32_t battery_charging_active;    /*!< Enable or disable Battery charging.
+                                       This parameter can be set to ENABLE or DISABLE        */
+  void                    *pData;      /*!< Pointer to upper stack Handler */
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+  void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd);                              /*!< USB OTG PCD SOF callback                */
+  void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd);                       /*!< USB OTG PCD Setup Stage callback        */
+  void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd);                            /*!< USB OTG PCD Reset callback              */
+  void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Suspend callback            */
+  void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd);                           /*!< USB OTG PCD Resume callback             */
+  void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Connect callback            */
+  void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd);                       /*!< USB OTG PCD Disconnect callback         */
+
+  void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);      /*!< USB OTG PCD Data OUT Stage callback     */
+  void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);       /*!< USB OTG PCD Data IN Stage callback      */
+  void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);  /*!< USB OTG PCD ISO OUT Incomplete callback */
+  void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);   /*!< USB OTG PCD ISO IN Incomplete callback  */
+  void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);      /*!< USB OTG PCD BCD callback                */
+  void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);      /*!< USB OTG PCD LPM callback                */
+
+  void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd);                          /*!< USB OTG PCD Msp Init callback           */
+  void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd);                        /*!< USB OTG PCD Msp DeInit callback         */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Include PCD HAL Extended module */
+#include "stm32h7xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               USBD_HS_SPEED
+#define PCD_SPEED_HIGH_IN_FULL       USBD_HSINFS_SPEED
+#define PCD_SPEED_FULL               USBD_FS_SPEED
+/**
+  * @}
+  */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1U
+#define PCD_PHY_EMBEDDED             2U
+#define PCD_PHY_UTMI                 3U
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Error_Code_definition PCD Error Code definition
+  * @brief  PCD Error Code definition
+  * @{
+  */
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+#define  HAL_PCD_ERROR_INVALID_CALLBACK                        (0x00000010U)    /*!< Invalid Callback error  */
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#define __HAL_PCD_ENABLE(__HANDLE__)                       (void)USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                      (void)USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) &=  (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                          ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE)) & 0x10U)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI_D1->IMR2 |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI_D1->IMR2 &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI_D1->IMR2 |= (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI_D1->IMR2 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
+/** @defgroup HAL_PCD_Callback_ID_enumeration_definition HAL USB OTG PCD Callback ID enumeration definition
+  * @brief  HAL USB OTG PCD Callback ID enumeration definition
+  * @{
+  */
+typedef enum
+{
+  HAL_PCD_SOF_CB_ID          = 0x01,      /*!< USB PCD SOF callback ID          */
+  HAL_PCD_SETUPSTAGE_CB_ID   = 0x02,      /*!< USB PCD Setup Stage callback ID  */
+  HAL_PCD_RESET_CB_ID        = 0x03,      /*!< USB PCD Reset callback ID        */
+  HAL_PCD_SUSPEND_CB_ID      = 0x04,      /*!< USB PCD Suspend callback ID      */
+  HAL_PCD_RESUME_CB_ID       = 0x05,      /*!< USB PCD Resume callback ID       */
+  HAL_PCD_CONNECT_CB_ID      = 0x06,      /*!< USB PCD Connect callback ID      */
+  HAL_PCD_DISCONNECT_CB_ID   = 0x07,      /*!< USB PCD Disconnect callback ID   */
+
+  HAL_PCD_MSPINIT_CB_ID      = 0x08,      /*!< USB PCD MspInit callback ID      */
+  HAL_PCD_MSPDEINIT_CB_ID    = 0x09       /*!< USB PCD MspDeInit callback ID    */
+
+} HAL_PCD_CallbackIDTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCD_Callback_pointer_definition HAL USB OTG PCD Callback pointer definition
+  * @brief  HAL USB OTG PCD Callback pointer definition
+  * @{
+  */
+
+typedef void (*pPCD_CallbackTypeDef)(PCD_HandleTypeDef *hpcd);                                   /*!< pointer to a common USB OTG PCD callback function  */
+typedef void (*pPCD_DataOutStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);        /*!< pointer to USB OTG PCD Data OUT Stage callback     */
+typedef void (*pPCD_DataInStageCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);         /*!< pointer to USB OTG PCD Data IN Stage callback      */
+typedef void (*pPCD_IsoOutIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);        /*!< pointer to USB OTG PCD ISO OUT Incomplete callback */
+typedef void (*pPCD_IsoInIncpltCallbackTypeDef)(PCD_HandleTypeDef *hpcd, uint8_t epnum);         /*!< pointer to USB OTG PCD ISO IN Incomplete callback  */
+typedef void (*pPCD_LpmCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);        /*!< pointer to USB OTG PCD LPM callback                */
+typedef void (*pPCD_BcdCallbackTypeDef)(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);        /*!< pointer to USB OTG PCD BCD callback                */
+
+/**
+  * @}
+  */
+
+HAL_StatusTypeDef HAL_PCD_RegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID, pPCD_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterCallback(PCD_HandleTypeDef *hpcd, HAL_PCD_CallbackIDTypeDef CallbackID);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataOutStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataOutStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterDataInStageCallback(PCD_HandleTypeDef *hpcd, pPCD_DataInStageCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterDataInStageCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoOutIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoOutIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd, pPCD_IsoInIncpltCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterIsoInIncpltCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterBcdCallback(PCD_HandleTypeDef *hpcd, pPCD_BcdCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterBcdCallback(PCD_HandleTypeDef *hpcd);
+
+HAL_StatusTypeDef HAL_PCD_RegisterLpmCallback(PCD_HandleTypeDef *hpcd, pPCD_LpmCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PCD_UnRegisterLpmCallback(PCD_HandleTypeDef *hpcd);
+#endif /* USE_HAL_PCD_REGISTER_CALLBACKS */
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint32_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+  * @{
+  */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+  * @{
+  */
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#define USB_OTG_FS_WAKEUP_EXTI_LINE                                   (0x1U << 12)  /*!< USB FS EXTI Line WakeUp Interrupt */
+#define USB_OTG_HS_WAKEUP_EXTI_LINE                                   (0x1U << 11)  /*!< USB HS EXTI Line WakeUp Interrupt */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+#ifndef USB_OTG_DOEPINT_OTEPSPR
+#define USB_OTG_DOEPINT_OTEPSPR                (0x1UL << 5)      /*!< Status Phase Received interrupt */
+#endif
+
+#ifndef USB_OTG_DOEPMSK_OTEPSPRM
+#define USB_OTG_DOEPMSK_OTEPSPRM               (0x1UL << 5)      /*!< Setup Packet Received interrupt mask */
+#endif
+
+#ifndef USB_OTG_DOEPINT_NAK
+#define USB_OTG_DOEPINT_NAK                    (0x1UL << 13)      /*!< NAK interrupt */
+#endif
+
+#ifndef USB_OTG_DOEPMSK_NAKM
+#define USB_OTG_DOEPMSK_NAKM                   (0x1UL << 13)      /*!< OUT Packet NAK interrupt mask */
+#endif
+
+#ifndef USB_OTG_DOEPINT_STPKTRX
+#define USB_OTG_DOEPINT_STPKTRX                (0x1UL << 15)      /*!< Setup Packet Received interrupt */
+#endif
+
+#ifndef USB_OTG_DOEPMSK_NYETM
+#define USB_OTG_DOEPMSK_NYETM                  (0x1UL << 14)      /*!< Setup Packet Received interrupt mask */
+#endif
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pcd_ex.h

@@ -0,0 +1,91 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_pcd_ex.h
+  * @author  MCD Application Team
+  * @brief   Header file of PCD HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_PCD_EX_H
+#define STM32H7xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCDEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+  * @{
+  */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @{
+  */
+
+#if defined (USB_OTG_FS) || defined (USB_OTG_HS)
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+
+
+HAL_StatusTypeDef HAL_PCDEx_ActivateBCD(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateBCD(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_BCD_VBUSDetect(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+void HAL_PCDEx_BCD_Callback(PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* defined (USB_OTG_FS) || defined (USB_OTG_HS) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp_stm32_freertos/STM32CubeH7/Drivers/BSP/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pssi.h

@@ -0,0 +1,506 @@
+/**
+  ******************************************************************************
+  * @file    stm32h7xx_hal_pssi.h
+  * @author  MCD Application Team
+  * @brief   Header file of PSSI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_PSSI_H
+#define STM32H7xx_HAL_PSSI_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_hal_def.h"
+
+/** @addtogroup STM32H7xx_HAL_Driver
+  * @{
+  */
+#if defined(PSSI)
+/** @addtogroup PSSI PSSI
+  * @brief PSSI HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PSSI_Exported_Types PSSI Exported Types
+  * @{
+  */
+
+
+/**
+  * @brief PSSI Init structure definition
+  */
+typedef struct
+{
+  uint32_t  DataWidth;          /* !< Configures the parallel bus width 8 lines or 16 lines */
+  uint32_t  BusWidth;           /* !< Configures the parallel bus width 8 lines or 16 lines */
+  uint32_t  ControlSignal;      /* !< Configures Data enable and Data ready */
+  uint32_t  ClockPolarity;      /* !< Configures the PSSI Input Clock polarity */
+  uint32_t  DataEnablePolarity; /* !< Configures the PSSI Data Enable polarity */
+  uint32_t  ReadyPolarity;      /* !< Configures the PSSI Ready polarity */
+
+} PSSI_InitTypeDef;
+
+
+/**
+  * @brief  HAL PSSI State structures definition
+  */
+typedef enum
+{
+  HAL_PSSI_STATE_RESET   = 0x00U, /* !< PSSI not yet initialized or disabled     */
+  HAL_PSSI_STATE_READY   = 0x01U, /* !< Peripheral initialized and ready for use */
+  HAL_PSSI_STATE_BUSY    = 0x02U, /* !< An internal process is ongoing           */
+  HAL_PSSI_STATE_BUSY_TX = 0x03U, /* !< Transmit process is ongoing              */
+  HAL_PSSI_STATE_BUSY_RX = 0x04U, /* !< Receive process is ongoing               */
+  HAL_PSSI_STATE_TIMEOUT = 0x05U, /* !< Timeout state                            */
+  HAL_PSSI_STATE_ERROR   = 0x06U, /* !< PSSI state error                         */
+  HAL_PSSI_STATE_ABORT   = 0x07U, /* !< PSSI process is aborted                  */
+
+} HAL_PSSI_StateTypeDef;
+
+/**
+  * @brief  PSSI handle Structure definition
+  */
+typedef struct __PSSI_HandleTypeDef
+{
+  PSSI_TypeDef         *Instance;    /*!< PSSI register base address.    */
+  PSSI_InitTypeDef      Init;        /*!< PSSI Initialization Structure. */
+  uint32_t             *pBuffPtr;    /*!< PSSI Data buffer.              */
+  uint32_t              XferCount;   /*!< PSSI transfer count            */
+  uint32_t              XferSize;    /*!< PSSI  transfer size            */
+  DMA_HandleTypeDef    *hdmatx;      /*!< PSSI Tx DMA Handle parameters  */
+  DMA_HandleTypeDef    *hdmarx;      /*!< PSSI Rx DMA Handle parameters  */
+
+  void (* TxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback. */
+  void (* RxCpltCallback)(struct __PSSI_HandleTypeDef *hpssi);    /*!< PSSI transfer complete callback. */
+  void (* ErrorCallback)(struct __PSSI_HandleTypeDef *hpssi);     /*!< PSSI transfer complete callback. */
+  void (* AbortCpltCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI transfer error callback.    */
+
+  void (* MspInitCallback)(struct __PSSI_HandleTypeDef *hpssi);   /*!< PSSI Msp Init callback.          */
+  void (* MspDeInitCallback)(struct __PSSI_HandleTypeDef *hpssi); /*!< PSSI Msp DeInit callback.        */
+
+  HAL_LockTypeDef             Lock;                               /*!< PSSI lock.                       */
+  __IO HAL_PSSI_StateTypeDef State;                               /*!< PSSI transfer state.             */
+  __IO uint32_t               ErrorCode;                          /*!< PSSI error code.                 */
+
+} PSSI_HandleTypeDef;
+
+
+/**
+  * @brief  HAL PSSI Callback pointer definition
+  */
+typedef  void (*pPSSI_CallbackTypeDef)(PSSI_HandleTypeDef *hpssi);  /*!< Pointer to a PSSI common callback function */
+
+/**
+  * @}
+  */
+/**
+  * @brief  HAL PSSI Callback ID enumeration definition
+  */
+typedef enum
+{
+  HAL_PSSI_TX_COMPLETE_CB_ID = 0x00U, /*!< PSSI Tx Transfer completed callback ID  */
+  HAL_PSSI_RX_COMPLETE_CB_ID = 0x01U, /*!< PSSI Rx Transfer completed callback ID  */
+  HAL_PSSI_ERROR_CB_ID       = 0x03U, /*!< PSSI Error callback ID                  */
+  HAL_PSSI_ABORT_CB_ID       = 0x04U, /*!< PSSI Abort callback ID                  */
+
+  HAL_PSSI_MSPINIT_CB_ID     = 0x05U, /*!< PSSI Msp Init callback ID               */
+  HAL_PSSI_MSPDEINIT_CB_ID   = 0x06U  /*!< PSSI Msp DeInit callback ID             */
+
+} HAL_PSSI_CallbackIDTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PSSI_Exported_Constants PSSI Exported Constants
+  * @{
+  */
+
+/** @defgroup PSSI_Error_Code PSSI Error Code
+  * @{
+  */
+#define HAL_PSSI_ERROR_NONE             0x00000000U /*!< No error                */
+#define HAL_PSSI_ERROR_NOT_SUPPORTED    0x00000001U /*!< Not supported operation */
+#define HAL_PSSI_ERROR_UNDER_RUN        0x00000002U /*!< FIFO Under-run error    */
+#define HAL_PSSI_ERROR_OVER_RUN         0x00000004U /*!< FIFO Over-run  error    */
+#define HAL_PSSI_ERROR_DMA              0x00000008U /*!< Dma     error           */
+#define HAL_PSSI_ERROR_TIMEOUT          0x00000010U /*!< Timeout error           */
+#define HAL_PSSI_ERROR_INVALID_CALLBACK 0x00000020U /*!< Invalid callback error  */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup PSSI_DATA_WIDTH PSSI Data Width
+  * @{
+  */
+
+#define HAL_PSSI_8BITS                  0x00000000U   /*!<  8 Bits  */
+#define HAL_PSSI_16BITS                 0x00000001U   /*!< 16 Bits  */
+#define HAL_PSSI_32BITS                 0x00000002U   /*!< 32 Bits  */
+/**
+  * @}
+  */
+
+/** @defgroup PSSI_BUS_WIDTH PSSI Bus Width
+  * @{
+  */
+
+#define HAL_PSSI_8LINES                 0x00000000U   /*!< 8 data lines  */
+#define HAL_PSSI_16LINES                PSSI_CR_EDM   /*!< 16 data lines */
+/**
+  * @}
+  */
+/** @defgroup PSSI_MODE PSSI mode
+  * @{
+  */
+#define HAL_PSSI_UNIDIRECTIONAL         0x00000000U /*!< Uni-directional mode */
+#define HAL_PSSI_BIDIRECTIONAL          0x00000001U /*!< Bi-directional mode  */
+/**
+  * @}
+  */
+
+/** @defgroup PSSI_ControlSignal Configuration
+  * @{
+  */
+#define HAL_PSSI_DE_RDY_DISABLE           (0x0U << PSSI_CR_DERDYCFG_Pos) /*!< Neither DE nor RDY are enabled */
+#define HAL_PSSI_RDY_ENABLE               (0x1U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled */
+#define HAL_PSSI_DE_ENABLE                (0x2U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled */
+#define HAL_PSSI_DE_RDY_ALT_ENABLE        (0x3U << PSSI_CR_DERDYCFG_Pos) /*!< Both RDY and DE alternate functions enabled */
+#define HAL_PSSI_MAP_RDY_BIDIR_ENABLE     (0x4U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on RDY pin */
+#define HAL_PSSI_RDY_MAP_ENABLE           (0x5U << PSSI_CR_DERDYCFG_Pos) /*!< Only RDY enabled, mapped to DE pin */
+#define HAL_PSSI_DE_MAP_ENABLE            (0x6U << PSSI_CR_DERDYCFG_Pos) /*!< Only DE enabled, mapped to RDY pin */
+#define HAL_PSSI_MAP_DE_BIDIR_ENABLE      (0x7U << PSSI_CR_DERDYCFG_Pos) /*!< Bi-directional on DE pin */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup PSSI_Data_Enable_Polarity Data Enable Polarity
+  * @{
+  */
+#define HAL_PSSI_DEPOL_ACTIVE_LOW         0x0U            /*!< Active Low */
+#define HAL_PSSI_DEPOL_ACTIVE_HIGH        PSSI_CR_DEPOL   /*!< Active High */
+/**
+  * @}
+  */
+/** @defgroup PSSI_Reday_Polarity Reday Polarity
+  * @{
+  */
+#define HAL_PSSI_RDYPOL_ACTIVE_LOW        0x0U            /*!< Active Low */
+#define HAL_PSSI_RDYPOL_ACTIVE_HIGH       PSSI_CR_RDYPOL  /*!< Active High */
+/**
+  * @}
+  */
+
+/** @defgroup PSSI_Clock_Polarity Clock Polarity
+  * @{
+  */
+#define HAL_PSSI_FALLING_EDGE             0x0U            /*!< Fallling Edge */
+#define HAL_PSSI_RISING_EDGE              0x1U            /*!< Rising Edge */
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup PSSI_DEFINITION PSSI definitions
+  * @{
+  */
+
+#define PSSI_MAX_NBYTE_SIZE         0x10000U         /* 64 KB */
+#define PSSI_TIMEOUT_TRANSMIT       0x0000FFFFU      /*!< Timeout Value   */
+
+#define PSSI_CR_OUTEN_INPUT         0x00000000U      /*!< Input Mode      */
+#define PSSI_CR_OUTEN_OUTPUT        PSSI_CR_OUTEN    /*!< Output Mode     */
+
+#define PSSI_CR_DMA_ENABLE          PSSI_CR_DMAEN    /*!< DMA Mode Enable */
+#define PSSI_CR_DMA_DISABLE         (~PSSI_CR_DMAEN) /*!< DMA Mode Disble */
+
+#define PSSI_CR_16BITS              PSSI_CR_EDM      /*!< 16 Lines Mode   */
+#define PSSI_CR_8BITS               (~PSSI_CR_EDM)   /*!< 8 Lines Mode    */
+
+#define PSSI_FLAG_RTT1B             PSSI_SR_RTT1B    /*!< 1 Byte Fifo Flag*/
+#define PSSI_FLAG_RTT4B             PSSI_SR_RTT4B    /*!< 4 Bytes Fifo Flag*/
+
+
+
+/**
+  * @}
+  */
+
+/** @defgroup PSSI_Interrupts PSSI Interrupts
+  * @{
+  */
+
+#define PSSI_FLAG_OVR_RIS            PSSI_RIS_OVR_RIS     /*!< Overrun, Underrun errors flag */
+#define PSSI_FLAG_MASK               PSSI_RIS_OVR_RIS_Msk /*!< Overrun, Underrun errors Mask */
+#define PSSI_FLAG_OVR_MIS            PSSI_MIS_OVR_MIS     /*!< Overrun, Underrun masked errors flag */
+/**
+  * @}
+  */
+
+
+
+/**
+  * @}
+  */
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup PSSI_Exported_Macros PSSI Exported Macros
+  * @{
+  */
+
+/** @brief Reset PSSI handle state
+  * @param  __HANDLE__ specifies the PSSI handle.
+  * @retval None
+  */
+
+#define HAL_PSSI_RESET_HANDLE_STATE(__HANDLE__) do{                                            \
+                                                      (__HANDLE__)->State = HAL_PSSI_STATE_RESET;\
+                                                      (__HANDLE__)->MspInitCallback = NULL;       \
+                                                      (__HANDLE__)->MspDeInitCallback = NULL;     \
+                                                     }while(0)
+
+
+/**
+  * @brief  Enable the PSSI.
+  * @param  __HANDLE__ PSSI handle
+  * @retval None.
+  */
+#define HAL_PSSI_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR |= PSSI_CR_ENABLE)
+/**
+  * @brief  Disable the PSSI.
+  * @param  __HANDLE__ PSSI handle
+  * @retval None.
+  */
+#define HAL_PSSI_DISABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR &= (~PSSI_CR_ENABLE))
+
+/* PSSI pripheral STATUS */
+/**
+  * @brief  Get the PSSI pending flags.
+  * @param  __HANDLE__ PSSI handle
+  * @param  __FLAG__ flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg PSSI_FLAG_RTT1B:  FIFO is ready to transfer one byte
+  *            @arg PSSI_FLAG_RTT4B: FIFO is ready to transfer four bytes
+  * @retval The state of FLAG.
+  */
+
+#define HAL_PSSI_GET_STATUS(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR & (__FLAG__))
+
+
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the PSSI pending flags.
+  * @param  __HANDLE__ PSSI handle
+  * @param  __FLAG__ flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag
+  * @retval The state of FLAG.
+  */
+#define HAL_PSSI_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->RIS & (__FLAG__))
+
+/**
+  * @brief  Clear the PSSI pending flags.
+  * @param  __HANDLE__ PSSI handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg PSSI_FLAG_OVR_RIS: Data Buffer overrun/underrun error flag
+  * @retval None
+  */
+#define HAL_PSSI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified PSSI interrupts.
+  * @param  __HANDLE__ PSSI handle
+  * @param __INTERRUPT__ specifies the PSSI interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg PSSI_FLAG_OVR_RIS: Configuration error mask
+  * @retval None
+  */
+#define HAL_PSSI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified PSSI interrupts.
+  * @param  __HANDLE__ PSSI handle
+  * @param __INTERRUPT__ specifies the PSSI interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg PSSI_IT_OVR_IE: Configuration error mask
+  * @retval None
+  */
+#define HAL_PSSI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified PSSI interrupt source is enabled or not.
+  * @param  __HANDLE__ PSSI handle
+  * @param  __INTERRUPT__ specifies the PSSI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg PSSI_IT_OVR_IE: Data Buffer overrun/underrun error interrupt mask
+  * @retval The state of INTERRUPT source.
+  */
+#define HAL_PSSI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/**
+  * @brief  Check whether the PSSI Control signal is valid.
+  * @param  __CONTROL__ Control signals configuration
+  * @retval Valid or not.
+  */
+
+#define IS_PSSI_CONTROL_SIGNAL(__CONTROL__) (((__CONTROL__) == HAL_PSSI_DE_RDY_DISABLE        ) || \
+                                             ((__CONTROL__) == HAL_PSSI_RDY_ENABLE            ) || \
+                                             ((__CONTROL__) == HAL_PSSI_DE_ENABLE             ) || \
+                                             ((__CONTROL__) == HAL_PSSI_DE_RDY_ALT_ENABLE     ) || \
+                                             ((__CONTROL__) == HAL_PSSI_MAP_RDY_BIDIR_ENABLE  ) || \
+                                             ((__CONTROL__) == HAL_PSSI_RDY_MAP_ENABLE        ) || \
+                                             ((__CONTROL__) == HAL_PSSI_DE_MAP_ENABLE         ) || \
+                                             ((__CONTROL__) == HAL_PSSI_MAP_DE_BIDIR_ENABLE   ))
+/**
+  * @brief  Check whether the PSSI Bus Width is valid.
+  * @param  __BUSWIDTH__ PSSI Bush width
+  * @retval Valid or not.
+  */
+
+#define IS_PSSI_BUSWIDTH(__BUSWIDTH__) (((__BUSWIDTH__) == HAL_PSSI_8LINES    ) || \
+                                        ((__BUSWIDTH__) == HAL_PSSI_16LINES   ))
+
+/**
+  * @brief  Check whether the PSSI Clock Polarity is valid.
+  * @param  __CLOCKPOL__ PSSI Clock Polarity
+  * @retval Valid or not.
+  */
+
+#define IS_PSSI_CLOCK_POLARITY(__CLOCKPOL__) (((__CLOCKPOL__) == HAL_PSSI_FALLING_EDGE   ) || \
+                                              ((__CLOCKPOL__) == HAL_PSSI_RISING_EDGE    ))
+/**
+  * @brief  Check whether the PSSI Data Enable Polarity is valid.
+  * @param  __DEPOL__ PSSI DE Polarity
+  * @retval Valid or not.
+  */
+
+#define IS_PSSI_DE_POLARITY(__DEPOL__) (((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_LOW    ) || \
+                                        ((__DEPOL__) == HAL_PSSI_DEPOL_ACTIVE_HIGH   ))
+/**
+  * @brief  Check whether the PSSI Ready Polarity is valid.
+  * @param  __RDYPOL__ PSSI RDY Polarity
+  * @retval Valid or not.
+  */
+
+#define IS_PSSI_RDY_POLARITY(__RDYPOL__) (((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_LOW   ) || \
+                                         ((__RDYPOL__) == HAL_PSSI_RDYPOL_ACTIVE_HIGH   ))
+/**
+  * @}
+  */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PSSI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup PSSI_Exported_Functions_Group1
+  * @{
+  */
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_PSSI_Init(PSSI_HandleTypeDef *hpssi);
+HAL_StatusTypeDef HAL_PSSI_DeInit(PSSI_HandleTypeDef *hpssi);
+void              HAL_PSSI_MspInit(PSSI_HandleTypeDef *hpssi);
+void              HAL_PSSI_MspDeInit(PSSI_HandleTypeDef *hpssi);
+/* Callbacks Register/UnRegister functions  ***********************************/
+
+HAL_StatusTypeDef HAL_PSSI_RegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID, pPSSI_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_PSSI_UnRegisterCallback(PSSI_HandleTypeDef *hpssi, HAL_PSSI_CallbackIDTypeDef CallbackID);
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup PSSI_Exported_Functions_Group2
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_PSSI_Transmit(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_PSSI_Receive(PSSI_HandleTypeDef *hpssi, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_PSSI_Transmit_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_PSSI_Receive_DMA(PSSI_HandleTypeDef *hpssi, uint32_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_PSSI_Abort_DMA(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_IRQHandler(PSSI_HandleTypeDef *hpssi);
+
+/**
+  * @}
+  */
+
+/** @addtogroup PSSI_Exported_Functions_Group3
+  * @{
+  */
+
+void HAL_PSSI_TxCpltCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_RxCpltCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_ErrorCallback(PSSI_HandleTypeDef *hpssi);
+void HAL_PSSI_AbortCpltCallback(PSSI_HandleTypeDef *hpssi);
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup PSSI_Exported_Functions_Group4
+  * @{
+  */
+
+/* Peripheral State functions ***************************************************/
+HAL_PSSI_StateTypeDef HAL_PSSI_GetState(PSSI_HandleTypeDef *hpssi);
+uint32_t               HAL_PSSI_GetError(PSSI_HandleTypeDef *hpssi);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+
+
+/* Private macros ------------------------------------------------------------*/
+
+
+/**
+  * @}
+  */
+#endif /* PSSI */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* STM32H7xx_HAL_PSSI_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/