fsfw/fsfw_example_public
Archived
13
1
Fork 1
Code Issues 1 Pull Requests Projects Releases 1 Wiki Activity

Init commit

Browse Source
This commit is contained in:
Steffen Gaisser
2021-04-27 17:22:34 +02:00
commit 4f6fe6959f
1140 changed files with 1174277 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

338
bsp_stm32_rtems/boardconfig/stm32h7xx_nucleo.h Normal file
View File

@ -0,0 +1,338 @@
/**
******************************************************************************
* @file stm32h7xx_nucleo.h
* @author MCD Application Team
* @brief This file contains definitions for:
* - LEDs and push-button available on STM32H7xx-Nucleo Kit
* from STMicroelectronics
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32H7XX_NUCLEO_H
#define STM32H7XX_NUCLEO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_nucleo_conf.h"
#include "stm32h7xx_nucleo_errno.h"
#if (USE_BSP_COM_FEATURE > 0)
#if (USE_COM_LOG > 0)
#ifndef __GNUC__
#include <stdio.h>
#endif
#endif
#endif
/** @addtogroup BSP
* @{
*/
/** @defgroup STM32H7XX_NUCLEO STM32H7XX_NUCLEO
* @{
*/
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL LOW LEVEL
* @{
*/
/**
* @brief Define for STM32H7XX_NUCLEO board
*/
#if !defined (USE_STM32H7XX_NUCLEO)
#define USE_STM32H7XX_NUCLEO
#endif
#if !defined (USE_NUCLEO_144)
#error "Board Pin number not defined!! Add USE_NUCLEO_144 define within stm32h7xx_nucleo_conf.h file"
#endif
#if !defined (USE_NUCLEO_H745ZI_Q) && !defined (USE_NUCLEO_H743ZI) && !defined (USE_NUCLEO_H743ZI2) &&\
!defined (USE_NUCLEO_H7A3ZI_Q) && !defined (USE_NUCLEO_H723ZG)
#error "Board Part number not defined!! Add one of the following define within stm32h7xx_nucleo_conf.h file:\
USE_NUCLEO_H745ZI_Q, USE_NUCLEO_H743ZI, USE_NUCLEO_H743ZI2, USE_NUCLEO_H7A3ZI_Q, USE_NUCLEO_H723ZG"
#endif
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
* @{
*/
#if defined (USE_NUCLEO_H745ZI_Q) || defined (USE_NUCLEO_H743ZI2) || defined (USE_NUCLEO_H7A3ZI_Q) || defined (USE_NUCLEO_H723ZG)
typedef enum
{
LED1 = 0,
LED_GREEN = LED1,
LED2 = 1,
LED_YELLOW = LED2,
LED3 = 2,
LED_RED = LED3,
LEDn
}Led_TypeDef;
#else /* USE_NUCLEO_H743ZI */
typedef enum
{
LED1 = 0,
LED_GREEN = LED1,
LED2 = 1,
LED_BLUE = LED2,
LED3 = 2,
LED_RED = LED3,
LEDn
}Led_TypeDef;
#endif
typedef enum
{
BUTTON_USER = 0U,
BUTTONn
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
#if (USE_BSP_COM_FEATURE > 0)
typedef enum
{
COM1 = 0U,
COMn
}COM_TypeDef;
typedef enum
{
COM_STOPBITS_1 = UART_STOPBITS_1,
COM_STOPBITS_2 = UART_STOPBITS_2,
}COM_StopBitsTypeDef;
typedef enum
{
COM_PARITY_NONE = UART_PARITY_NONE,
COM_PARITY_EVEN = UART_PARITY_EVEN,
COM_PARITY_ODD = UART_PARITY_ODD,
}COM_ParityTypeDef;
typedef enum
{
COM_HWCONTROL_NONE = UART_HWCONTROL_NONE,
COM_HWCONTROL_RTS = UART_HWCONTROL_RTS,
COM_HWCONTROL_CTS = UART_HWCONTROL_CTS,
COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS,
}COM_HwFlowCtlTypeDef;
typedef enum
{
COM_WORDLENGTH_7B = UART_WORDLENGTH_7B,
COM_WORDLENGTH_8B = UART_WORDLENGTH_8B,
COM_WORDLENGTH_9B = UART_WORDLENGTH_9B,
}COM_WordLengthTypeDef;
typedef struct
{
uint32_t BaudRate;
COM_WordLengthTypeDef WordLength;
COM_StopBitsTypeDef StopBits;
COM_ParityTypeDef Parity;
COM_HwFlowCtlTypeDef HwFlowCtl;
}COM_InitTypeDef;
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
typedef struct
{
void (* pMspInitCb)(UART_HandleTypeDef *);
void (* pMspDeInitCb)(UART_HandleTypeDef *);
}BSP_COM_Cb_t;
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1) */
#define MX_UART_InitTypeDef COM_InitTypeDef
#endif
/**
* @}
*/
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
* @{
*/
/**
* @brief STM32H7XX NUCLEO BSP Driver version number V1.1.0
*/
#define STM32H7XX_NUCLEO_BSP_VERSION_MAIN (0x01U) /*!< [31:24] main version */
#define STM32H7XX_NUCLEO_BSP_VERSION_SUB1 (0x01U) /*!< [23:16] sub1 version */
#define STM32H7XX_NUCLEO_BSP_VERSION_SUB2 (0x00U) /*!< [15:8] sub2 version */
#define STM32H7XX_NUCLEO_BSP_VERSION_RC (0x00U) /*!< [7:0] release candidate */
#define STM32H7XX_NUCLEO_BSP_VERSION ((STM32H7XX_NUCLEO_BSP_VERSION_MAIN << 24)\
|(STM32H7XX_NUCLEO_BSP_VERSION_SUB1 << 16)\
|(STM32H7XX_NUCLEO_BSP_VERSION_SUB2 << 8 )\
|(STM32H7XX_NUCLEO_BSP_VERSION_RC))
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_LED LOW LEVEL LED
* @{
*/
#define LEDn 3U
#define LED1_PIN GPIO_PIN_0
#define LED1_GPIO_PORT GPIOB
#define LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#if defined (USE_NUCLEO_H745ZI_Q) || defined (USE_NUCLEO_H743ZI2) || defined (USE_NUCLEO_H7A3ZI_Q) || defined (USE_NUCLEO_H723ZG)
#define LED2_PIN GPIO_PIN_1
#define LED2_GPIO_PORT GPIOE
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE()
#else /* USE_NUCLEO_H743ZI */
#define LED2_PIN GPIO_PIN_7
#define LED2_GPIO_PORT GPIOB
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#endif
#define LED3_PIN GPIO_PIN_14
#define LED3_GPIO_PORT GPIOB
#define LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
/**
* @}
*/
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_BUTTON LOW LEVEL BUTTON
* @{
*/
/* Button state */
#define BUTTON_RELEASED 0U
#define BUTTON_PRESSED 1U
#define BUTTONn 1U
/**
* @brief Key push-button
*/
#define BUTTON_USER_PIN GPIO_PIN_13
#define BUTTON_USER_GPIO_PORT GPIOC
#define BUTTON_USER_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define BUTTON_USER_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define BUTTON_USER_EXTI_IRQn EXTI15_10_IRQn
#define BUTTON_USER_EXTI_LINE EXTI_LINE_13
/**
* @}
*/
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_COM LOW LEVEL COM
* @{
*/
/**
* @brief Definition for COM port1, connected to USART3
*/
#if (USE_BSP_COM_FEATURE > 0)
#define COMn 1U
#define COM1_UART USART3
#define COM1_CLK_ENABLE() __HAL_RCC_USART3_CLK_ENABLE()
#define COM1_CLK_DISABLE() __HAL_RCC_USART3_CLK_DISABLE()
#define COM1_TX_PIN GPIO_PIN_8
#define COM1_TX_GPIO_PORT GPIOD
#define COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define COM1_TX_AF GPIO_AF7_USART3
#define COM1_RX_PIN GPIO_PIN_9
#define COM1_RX_GPIO_PORT GPIOD
#define COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE()
#define COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE()
#define COM1_RX_AF GPIO_AF7_USART3
#define COM_POLL_TIMEOUT 1000
#endif
/**
* @}
*/
/**
* @}
*/
/** @addtogroup STM32H7XX_NUCLEO_LOW_LEVEL_Exported_Variables
* @{
*/
extern EXTI_HandleTypeDef hpb_exti[];
#if (USE_BSP_COM_FEATURE > 0)
extern UART_HandleTypeDef hcom_uart[];
extern USART_TypeDef* COM_USART[];
#endif
/**
* @}
*/
/** @defgroup STM32H7XX_NUCLEO_LOW_LEVEL_Exported_FunctionsPrototypes LOW LEVEL Exported Functions Prototypes
* @{
*/
int32_t BSP_GetVersion(void);
int32_t BSP_LED_Init(Led_TypeDef Led);
int32_t BSP_LED_DeInit(Led_TypeDef Led);
int32_t BSP_LED_On(Led_TypeDef Led);
int32_t BSP_LED_Off(Led_TypeDef Led);
int32_t BSP_LED_Toggle(Led_TypeDef Led);
int32_t BSP_LED_GetState (Led_TypeDef Led);
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
int32_t BSP_PB_DeInit(Button_TypeDef Button);
int32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_PB_IRQHandler(Button_TypeDef Button);
void BSP_PB_Callback(Button_TypeDef Button);
#if (USE_BSP_COM_FEATURE > 0)
int32_t BSP_COM_Init(COM_TypeDef COM, COM_InitTypeDef *COM_Init);
int32_t BSP_COM_DeInit(COM_TypeDef COM);
#if (USE_COM_LOG > 0)
int32_t BSP_COM_SelectLogPort (COM_TypeDef COM);
#endif
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1)
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM);
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
HAL_StatusTypeDef MX_USART3_Init(UART_HandleTypeDef *huart, MX_UART_InitTypeDef *COM_Init);
#endif /* USE_BSP_COM_FEATURE */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* STM32H7XX_NUCLEO_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/