Files
sat-rs/satrs-example/src/acs/mgm.rs
T
Robin Mueller 86d8528d21 feat: add FDIR fault counter and wire it into the MGM device handler
Add satrs::fdir::FaultCounter, an FSFW-style error threshold counter:
counts faults, decrements over time when faults stop, and reports
when a threshold is exceeded. Two variants for now, mirroring the
hk.rs helper pattern:
- FaultCounterStd, backed by std::time::Instant
- FaultCounterEmbassy, backed by embassy_time::Instant (embassy-time
  feature), with an optional defmt::Format impl gated on the defmt
  feature

Add satrs::health::HealthTableMapSync::default() for easy construction
of a shared, global health table.

Wire both into the example app's MGM device handler as the first real
FDIR use case:
- the minisim MGM model gains SpiFaultMode (None/AllZeros/AllOnes) and
  a SetSpiFault request, so a stuck SPI bus can be injected for testing,
  independent of switch state
- MgmHandlerLis3Mdl::poll_sensor checks the SPI transfer result: a
  comm timeout or an all-1s stuck-bus reply (the same pattern the sim
  already uses for "device off") counts as a fault. Above threshold,
  the component is marked Faulty in a HealthTableMapSync shared from
  main.rs. This logic lives in the device handler, not the SPI comm
  layer, since deciding what a failed transfer means for FDIR is a
  handler concern.
- an all-0s reply is deliberately not treated as a fault, since it
  collides with a legitimate zero-field reading
2026-09-16 13:56:47 +02:00

1007 lines
37 KiB
Rust

use satrs::fdir::FaultCounterStd;
use satrs::health::{HealthState, HealthTableMapSync, HealthTableProvider};
use satrs::spacepackets::CcsdsPacketIdAndPsc;
use satrs_example::{HkHelperSingleSet, ModeHelper, TimestampHelper, TmtcQueues};
use satrs_minisim::acs::MgmRequestLis3Mdl;
use satrs_minisim::acs::lis3mdl::{
FIELD_LSB_PER_GAUSS_4_SENS, GAUSS_TO_MICROTESLA_FACTOR, MgmLis3MdlReply, MgmLis3RawValues,
};
use satrs_minisim::{SerializableSimMsgPayload, SimReply, SimRequest};
use std::sync::mpsc;
use std::sync::{Arc, Mutex};
use std::time::Duration;
use types::acs::mgm::SensorData;
use types::acs::mgm::request::ModeRequest;
use types::acs::mgm::response::ModeResponse;
use types::pcdu::SwitchId;
use types::{ComponentId, DeviceMode, HkRequestType, acs::mgm};
use crate::ccsds::pack_ccsds_tm_packet_for_now;
use crate::eps::PowerSwitchHelper;
pub const NR_OF_DATA_AND_CFG_REGISTERS: usize = 14;
// Register adresses to access various bytes from the raw reply.
pub const X_LOWBYTE_IDX: usize = 9;
pub const Y_LOWBYTE_IDX: usize = 11;
pub const Z_LOWBYTE_IDX: usize = 13;
// FDIR configuration for a stuck SPI bus (data pinned to all-1s). Chosen so a handful of
// transient errors are tolerated but a persistently faulty bus is caught quickly.
//
// SPI itself cannot time out: the master clocks bytes in lockstep, so a transfer always
// completes. An unresponsive or dead device does not withhold a reply, it just leaves the bus
// floating, which is read back as this same all-1s pattern.
pub const SPI_FAULT_THRESHOLD: u32 = 2;
pub const SPI_FAULT_DECREMENT_AFTER: Duration = Duration::from_secs(30);
#[derive(Debug, PartialEq, Eq, Clone, Copy)]
pub enum MgmId {
_0,
_1,
}
impl MgmId {
pub const fn str(&self) -> &str {
match self {
MgmId::_0 => "MGM 0",
MgmId::_1 => "MGM 1",
}
}
#[inline]
pub const fn component_id(&self) -> ComponentId {
match self {
MgmId::_0 => ComponentId::AcsMgm0,
MgmId::_1 => ComponentId::AcsMgm1,
}
}
}
#[derive(Default, Debug, PartialEq, Eq)]
pub enum TransitionState {
#[default]
Idle,
PowerSwitching,
Done,
}
#[derive(Default)]
pub struct SpiDummyInterface {
pub dummy_values: MgmLis3RawValues,
}
impl SpiDummyInterface {
fn transfer(&mut self, _tx: &[u8], rx: &mut [u8]) {
rx[X_LOWBYTE_IDX..X_LOWBYTE_IDX + 2].copy_from_slice(&self.dummy_values.x.to_le_bytes());
rx[Y_LOWBYTE_IDX..Y_LOWBYTE_IDX + 2].copy_from_slice(&self.dummy_values.y.to_be_bytes());
rx[Z_LOWBYTE_IDX..Z_LOWBYTE_IDX + 2].copy_from_slice(&self.dummy_values.z.to_be_bytes());
}
}
#[derive(Default)]
pub struct TestSpiInterface {
pub call_count: u32,
pub next_mgm_data: MgmLis3RawValues,
}
impl TestSpiInterface {
fn transfer(&mut self, _tx: &[u8], rx: &mut [u8]) {
rx[X_LOWBYTE_IDX..X_LOWBYTE_IDX + 2].copy_from_slice(&self.next_mgm_data.x.to_le_bytes());
rx[Y_LOWBYTE_IDX..Y_LOWBYTE_IDX + 2].copy_from_slice(&self.next_mgm_data.y.to_le_bytes());
rx[Z_LOWBYTE_IDX..Z_LOWBYTE_IDX + 2].copy_from_slice(&self.next_mgm_data.z.to_le_bytes());
self.call_count += 1;
}
}
pub struct SpiSimInterface {
pub sim_request_tx: mpsc::Sender<SimRequest>,
pub sim_reply_rx: mpsc::Receiver<SimReply>,
}
impl SpiSimInterface {
// Right now, we only support requesting sensor data and not configuration of the sensor.
fn transfer(&mut self, _tx: &[u8], rx: &mut [u8]) {
let mgm_sensor_request = MgmRequestLis3Mdl::RequestSensorData;
if let Err(e) = self
.sim_request_tx
.send(SimRequest::new_with_epoch_time(mgm_sensor_request))
{
log::error!("failed to send MGM LIS3 request: {e}");
}
match self.sim_reply_rx.recv_timeout(Duration::from_millis(50)) {
Ok(sim_reply) => {
let sim_reply_lis3 = MgmLis3MdlReply::from_sim_message(&sim_reply)
.expect("failed to parse LIS3 reply");
rx[X_LOWBYTE_IDX..X_LOWBYTE_IDX + 2]
.copy_from_slice(&sim_reply_lis3.raw.x.to_le_bytes());
rx[Y_LOWBYTE_IDX..Y_LOWBYTE_IDX + 2]
.copy_from_slice(&sim_reply_lis3.raw.y.to_le_bytes());
rx[Z_LOWBYTE_IDX..Z_LOWBYTE_IDX + 2]
.copy_from_slice(&sim_reply_lis3.raw.z.to_le_bytes());
}
Err(e) => {
log::warn!("MGM LIS3 SIM reply timeout: {e}");
}
}
}
}
pub enum SpiCommunication {
Dummy(SpiDummyInterface),
Sim(SpiSimInterface),
#[allow(dead_code)]
Test(TestSpiInterface),
}
impl SpiCommunication {
fn transfer(&mut self, tx: &[u8], rx: &mut [u8]) {
match self {
SpiCommunication::Dummy(dummy) => dummy.transfer(tx, rx),
SpiCommunication::Sim(sim_if) => sim_if.transfer(tx, rx),
SpiCommunication::Test(test_if) => test_if.transfer(tx, rx),
}
}
}
#[derive(Default)]
pub struct BufWrapper {
tx_buf: [u8; 32],
rx_buf: [u8; 32],
}
/// Helper component for communication with a parent component, which is usually as assembly.
pub struct ModeLeafHelper {
pub request_rx: mpsc::Receiver<ModeRequest>,
pub report_tx: mpsc::SyncSender<ModeResponse>,
}
/// Example MGM device handler strongly based on the LIS3MDL MEMS device.
pub struct MgmHandlerLis3Mdl {
id: MgmId,
switch_helper: PowerSwitchHelper,
tmtc_queues: TmtcQueues,
pub spi_com: SpiCommunication,
shared_mgm_set: Arc<Mutex<SensorData>>,
buffers: BufWrapper,
stamp_helper: TimestampHelper,
hk_helper: HkHelperSingleSet,
mode_helpers: ModeHelper<DeviceMode, TransitionState>,
mode_leaf_helper: ModeLeafHelper,
spi_fault_counter: FaultCounterStd,
health_table: HealthTableMapSync,
}
impl MgmHandlerLis3Mdl {
#[allow(clippy::too_many_arguments)]
pub fn new(
id: MgmId,
tmtc_queues: TmtcQueues,
switch_helper: PowerSwitchHelper,
spi_com: SpiCommunication,
shared_mgm_set: Arc<Mutex<SensorData>>,
mode_leaf_helper: ModeLeafHelper,
mode_timeout: Duration,
health_table: HealthTableMapSync,
) -> Self {
Self {
id,
tmtc_queues,
switch_helper,
spi_com,
shared_mgm_set,
mode_helpers: ModeHelper::new(DeviceMode::Off, mode_timeout),
buffers: BufWrapper::default(),
stamp_helper: TimestampHelper::default(),
hk_helper: HkHelperSingleSet::new(false, Duration::from_millis(200)),
mode_leaf_helper,
spi_fault_counter: FaultCounterStd::new(SPI_FAULT_THRESHOLD, SPI_FAULT_DECREMENT_AFTER),
health_table,
}
}
#[inline]
pub fn mode(&self) -> DeviceMode {
self.mode_helpers.current
}
#[inline]
pub fn switch_id(&self) -> SwitchId {
match self.id {
MgmId::_0 => SwitchId::Mgm0,
MgmId::_1 => SwitchId::Mgm1,
}
}
pub fn periodic_operation(&mut self) {
// Update current time.
self.stamp_helper.update_from_now();
// Handle requests.
self.handle_telecommands();
// Handle assembly related messages.
self.handle_mode_leaf_handling();
// Handle mode transitions first.
self.handle_mode_transition();
// Poll sensor before checking and generating HK.
if self.mode() == DeviceMode::Normal {
log::trace!("polling LIS3MDL sensor {}", self.id.str());
self.poll_sensor();
}
// Finally check whether any HK generation is necessary.
if self.hk_helper.needs_generation() {
self.generate_hk(None);
}
}
pub fn handle_telecommands(&mut self) {
loop {
match self.tmtc_queues.tc_rx.try_recv() {
Ok(packet) => {
let tc_id = CcsdsPacketIdAndPsc::new_from_ccsds_packet(&packet.sp_header);
match postcard::from_bytes::<mgm::request::Request>(&packet.payload) {
Ok(request) => {
log::info!(
"received request {:?} with TC ID {:#010x}",
request,
tc_id.raw()
);
match request {
mgm::request::Request::Ping => {
self.send_telemetry(Some(tc_id), mgm::response::Response::Ok)
}
mgm::request::Request::Hk(hk_request) => {
self.handle_hk_request(Some(tc_id), &hk_request)
}
mgm::request::Request::Mode(device_mode) => match device_mode {
ModeRequest::SetMode(device_mode) => {
self.mode_helpers.tc_commander = Some(tc_id);
self.start_transition(device_mode, false);
}
ModeRequest::ReadMode => self.send_telemetry(
Some(tc_id),
mgm::response::Response::Mode(ModeResponse::Mode(
self.mode(),
)),
),
},
mgm::request::Request::Health(health_request) => {
match health_request {
mgm::request::HealthRequest::SetHealth(health_state) => {
log::info!(
"{}: setting health to {:?} via ground command",
self.id.str(),
health_state
);
self.health_table.set_health(
self.id.component_id().into(),
health_state,
);
self.send_telemetry(
Some(tc_id),
mgm::response::Response::Ok,
);
}
}
}
}
}
Err(e) => {
log::warn!("failed to deserialize request: {}", e);
}
}
}
Err(e) => match e {
std::sync::mpsc::TryRecvError::Empty => break,
std::sync::mpsc::TryRecvError::Disconnected => {
log::warn!("packet sender disconnected")
}
},
}
}
}
pub fn handle_mode_leaf_handling(&mut self) {
loop {
match self.mode_leaf_helper.request_rx.try_recv() {
Ok(request) => match request {
ModeRequest::SetMode(device_mode) => self.start_transition(device_mode, false),
ModeRequest::ReadMode => self.report_mode_to_parent(),
},
Err(e) => match e {
std::sync::mpsc::TryRecvError::Empty => break,
std::sync::mpsc::TryRecvError::Disconnected => {
log::warn!("packet sender disconnected")
}
},
}
}
}
pub fn send_telemetry(
&self,
tc_id: Option<CcsdsPacketIdAndPsc>,
response: mgm::response::Response,
) {
match pack_ccsds_tm_packet_for_now(self.id.component_id(), tc_id, &response) {
Ok(packet) => {
if let Err(e) = self.tmtc_queues.tm_tx.send(packet) {
log::warn!("failed to send TM packet: {}", e);
}
}
Err(e) => {
log::warn!("failed to pack TM packet: {}", e);
}
}
}
pub fn handle_hk_request(
&mut self,
tc_id: Option<CcsdsPacketIdAndPsc>,
hk_request: &types::acs::mgm::request::HkRequest,
) {
match hk_request.req_type {
HkRequestType::OneShot => {
self.generate_hk(tc_id);
}
HkRequestType::EnablePeriodic(duration) => {
self.hk_helper.enabled = true;
self.hk_helper.frequency = duration;
}
HkRequestType::DisablePeriodic => {
self.hk_helper.enabled = false;
}
HkRequestType::ModifyInterval(duration) => {
self.hk_helper.frequency = duration;
}
_ => log::warn!("unhandled HK request"),
}
}
pub fn generate_hk(&self, opt_tc_id: Option<CcsdsPacketIdAndPsc>) {
let mgm_snapshot = *self.shared_mgm_set.lock().unwrap();
self.send_telemetry(
opt_tc_id,
mgm::response::Response::Hk(mgm::response::HkResponse::MgmData(mgm_snapshot)),
)
}
pub fn poll_sensor(&mut self) {
// Communicate with the device. This is actually how to read the data from the LIS3 device
// SPI interface.
self.spi_com.transfer(
&self.buffers.tx_buf[0..NR_OF_DATA_AND_CFG_REGISTERS + 1],
&mut self.buffers.rx_buf[0..NR_OF_DATA_AND_CFG_REGISTERS + 1],
);
let x_raw = i16::from_le_bytes(
self.buffers.rx_buf[X_LOWBYTE_IDX..X_LOWBYTE_IDX + 2]
.try_into()
.unwrap(),
);
let y_raw = i16::from_le_bytes(
self.buffers.rx_buf[Y_LOWBYTE_IDX..Y_LOWBYTE_IDX + 2]
.try_into()
.unwrap(),
);
let z_raw = i16::from_le_bytes(
self.buffers.rx_buf[Z_LOWBYTE_IDX..Z_LOWBYTE_IDX + 2]
.try_into()
.unwrap(),
);
// A stuck-high SPI bus (undriven MISO) reads back as all-1s on every register,
// regardless of what was actually requested. This is the pattern this codebase already
// uses for "no real device behind the bus" (see the switched-off MGM sim reply). An
// all-0s reading is not used here, since it collides with a legitimate zero-field
// reading and would cause false positives.
if x_raw == -1 && y_raw == -1 && z_raw == -1 {
self.register_spi_fault();
return;
}
self.spi_fault_counter.try_decrement();
// Simple scaling to retrieve the float value, assuming the best sensor resolution.
let mut mgm_guard = self.shared_mgm_set.lock().unwrap();
mgm_guard.x = x_raw as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
mgm_guard.y = y_raw as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
mgm_guard.z = z_raw as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
mgm_guard.valid = true;
drop(mgm_guard);
}
/// Registers one stuck-bus SPI fault with the FDIR fault counter, invalidating the current
/// sensor set. If the failure threshold is exceeded, the component is marked faulty in the
/// global health table.
fn register_spi_fault(&mut self) {
log::warn!("{}: stuck-bus SPI fault", self.id.str());
self.shared_mgm_set.lock().unwrap().valid = false;
if !self.spi_fault_counter.increment_and_check() {
return;
}
// Ground may have taken manual control, or already given up on this component.
// Autonomous FDIR should not override that decision.
let component_id = self.id.component_id().into();
match self.health_table.health(component_id) {
Some(HealthState::ExternalControl) | Some(HealthState::PermanentFaulty) => {
log::info!(
"{}: SPI fault threshold exceeded, but health is externally controlled, \
not overriding",
self.id.str()
);
}
_ => {
log::error!(
"{}: SPI fault threshold exceeded, marking component faulty",
self.id.str()
);
self.health_table
.set_health(component_id, HealthState::Faulty);
// TODO: Event? Health-table changes are currently invisible to the ground
// except through this log line. Likely applies to other health/mode
// transitions across the example app too, not just this one.
// Do not restart an already pending Off transition: poll_sensor still calls
// this every cycle the fault persists, and current stays Normal until the
// transition completes, so re-triggering here would keep resetting the
// transition state machine before it can ever finish.
if self.mode_helpers.target != Some(DeviceMode::Off) {
log::warn!("{}: commanding device off due to fault", self.id.str());
self.start_transition(DeviceMode::Off, true);
}
}
}
}
fn start_transition(&mut self, target_mode: DeviceMode, _forced: bool) {
log::info!("{}: transitioning to mode {:?}", self.id.str(), target_mode);
if target_mode == DeviceMode::Off {
self.shared_mgm_set.lock().unwrap().valid = false;
}
self.mode_helpers.start(target_mode);
}
pub fn handle_mode_transition(&mut self) {
if self.mode_helpers.target.is_none() {
return;
}
let target_mode = self.mode_helpers.target.unwrap();
let switch_target_on = target_mode != DeviceMode::Off;
if self.mode_helpers.transition_state == TransitionState::Idle {
let result = if switch_target_on {
self.switch_helper.send_switch_on_cmd(self.switch_id())
} else {
self.switch_helper.send_switch_off_cmd(self.switch_id())
};
if result.is_err() {
// Could not send switch command.. still continue with transition.
log::error!(
"failed to send switch {} command",
if switch_target_on { "on" } else { "off" }
);
}
self.mode_helpers.transition_state = TransitionState::PowerSwitching;
}
if self.mode_helpers.transition_state == TransitionState::PowerSwitching {
if self.switch_helper.is_switch_on(self.switch_id()) == switch_target_on {
log::info!("switch is {}", if switch_target_on { "on" } else { "off" });
self.mode_helpers.transition_state = TransitionState::Done;
} else if self.mode_helpers.timed_out() {
self.handle_mode_transition_failure();
}
}
if self.mode_helpers.transition_state == TransitionState::Done {
self.handle_mode_reached();
}
}
// Should be called to complete a mode transition which failed.
fn handle_mode_transition_failure(&mut self) {
let tc_commander = self.mode_helpers.finish(false);
if tc_commander.is_some() {
self.send_telemetry(
tc_commander,
mgm::response::Response::Mode(ModeResponse::SetModeTimeout),
);
}
self.mode_leaf_helper
.report_tx
.send(ModeResponse::SetModeTimeout)
.unwrap();
}
// Should be called to complete a mode transition successfully.
fn handle_mode_reached(&mut self) {
let tc_commander = self.mode_helpers.finish(true);
self.announce_mode();
if let Some(requestor) = tc_commander {
self.send_mode_tm(requestor);
}
// Inform our parent about mode changes.
self.report_mode_to_parent();
}
fn announce_mode(&self) {
log::info!(
"{} announcing mode: {:?}",
self.id.str(),
self.mode_helpers.current
);
// TODO: Event?
}
fn report_mode_to_parent(&self) {
self.mode_leaf_helper
.report_tx
.send(ModeResponse::Mode(self.mode_helpers.current))
.unwrap();
}
fn send_mode_tm(&self, requestor: CcsdsPacketIdAndPsc) {
self.send_telemetry(Some(requestor), mgm::response::Response::Ok);
}
}
#[cfg(test)]
mod tests {
use std::sync::{
Arc,
mpsc::{self, TryRecvError},
};
use arbitrary_int::u11;
use satrs::spacepackets::SpacePacketHeader;
use satrs_minisim::acs::lis3mdl::MgmLis3RawValues;
use types::{
Apid, ComponentId, TcHeader,
acs::mgm::request::HkRequest,
ccsds::{CcsdsTcPacketOwned, CcsdsTmPacketOwned},
pcdu::{SwitchRequest, SwitchState, SwitchStateBinary},
};
use crate::eps::pcdu::{SharedSwitchSet, SwitchMap, SwitchSet};
use super::*;
#[derive(Debug, Copy, Clone)]
pub enum MgmSelect {
_0,
_1,
}
impl MgmSelect {
pub fn id(&self) -> ComponentId {
match self {
MgmSelect::_0 => ComponentId::AcsMgm0,
MgmSelect::_1 => ComponentId::AcsMgm1,
}
}
}
pub fn create_request_tc(
select: MgmSelect,
request: types::acs::mgm::request::Request,
) -> types::ccsds::CcsdsTcPacketOwned {
types::ccsds::CcsdsTcPacketOwned::new_with_request(
SpacePacketHeader::new_from_apid(u11::new(Apid::Acs as u16)),
TcHeader::new(select.id(), types::MessageType::Ping),
request,
)
}
#[allow(dead_code)]
pub struct MgmTestbench {
pub assembly_mode_request_tx: mpsc::SyncSender<ModeRequest>,
pub mode_report_rx: mpsc::Receiver<ModeResponse>,
pub shared_switch_set: SharedSwitchSet,
pub tc_tx: mpsc::SyncSender<CcsdsTcPacketOwned>,
pub tm_rx: mpsc::Receiver<CcsdsTmPacketOwned>,
pub switch_rx: mpsc::Receiver<SwitchRequest>,
pub health_table: HealthTableMapSync,
pub handler: MgmHandlerLis3Mdl,
}
impl MgmTestbench {
pub fn new() -> Self {
let (assembly_mode_request_tx, assembly_mode_request_rx) = mpsc::sync_channel(5);
let (mode_report_tx, mode_report_rx) = mpsc::sync_channel(5);
let mode_leaf_helper = ModeLeafHelper {
request_rx: assembly_mode_request_rx,
report_tx: mode_report_tx,
};
let (tc_tx, tc_rx) = mpsc::sync_channel(10);
let (tm_tx, tm_rx) = mpsc::sync_channel(10);
let (switcher_tx, switch_rx) = mpsc::sync_channel(10);
let shared_mgm_set = Arc::default();
let mut switch_map = SwitchMap::new();
switch_map.insert(SwitchId::Mgm0, SwitchState::Off);
let switch_map = SwitchSet::new(switch_map);
let shared_switch_set = SharedSwitchSet::new(Mutex::new(switch_map));
let health_table = HealthTableMapSync::default();
let handler = MgmHandlerLis3Mdl::new(
MgmId::_0,
TmtcQueues { tc_rx, tm_tx },
PowerSwitchHelper::new(switcher_tx, shared_switch_set.clone()),
SpiCommunication::Test(TestSpiInterface::default()),
shared_mgm_set,
mode_leaf_helper,
Duration::from_millis(100),
health_table.clone(),
);
Self {
assembly_mode_request_tx,
mode_report_rx,
shared_switch_set,
switch_rx,
health_table,
handler,
tm_rx,
tc_tx,
}
}
/// Switches the MGM to `Normal` mode, completing the power-switch handshake.
pub fn switch_to_normal(&mut self) {
self.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Mode(ModeRequest::SetMode(DeviceMode::Normal)),
))
.unwrap();
self.handler.periodic_operation();
self.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::On);
self.handler.periodic_operation();
assert_eq!(self.handler.mode(), DeviceMode::Normal);
}
pub fn test_spi_interface(&mut self) -> &mut TestSpiInterface {
match &mut self.handler.spi_com {
SpiCommunication::Dummy(_) | SpiCommunication::Sim(_) => {
panic!("unexpected SPI interface")
}
SpiCommunication::Test(test_spi_interface) => test_spi_interface,
}
}
}
#[test]
fn test_basic_handler() {
let mut testbench = MgmTestbench::new();
assert_eq!(testbench.test_spi_interface().call_count, 0);
assert_eq!(testbench.handler.mode(), DeviceMode::Off);
testbench.handler.periodic_operation();
// Handler is OFF, no changes expected.
assert_eq!(testbench.test_spi_interface().call_count, 0);
assert_eq!(testbench.handler.mode(), DeviceMode::Off);
}
#[test]
fn test_normal_handler() {
let mut testbench = MgmTestbench::new();
testbench
.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Mode(ModeRequest::SetMode(DeviceMode::Normal)),
))
.unwrap();
testbench.handler.periodic_operation();
assert_eq!(testbench.handler.mode(), DeviceMode::Off);
// Verify power switch handling.
let switch_req = testbench.switch_rx.try_recv().expect("no switch request");
assert_eq!(switch_req.switch_id, SwitchId::Mgm0);
assert_eq!(switch_req.target_state, SwitchStateBinary::On);
// This simulates one cycle for the power switch to update.
testbench
.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::On);
// Now the power switch is updated and the mode request should be completed.
testbench.handler.periodic_operation();
assert_eq!(testbench.handler.mode(), DeviceMode::Normal);
let tm_packet = testbench.tm_rx.try_recv().expect("no mode reply generated");
assert_eq!(tm_packet.tm_header.sender_id, ComponentId::AcsMgm0);
let response =
postcard::from_bytes::<types::acs::mgm::response::Response>(&tm_packet.payload)
.expect("failed to deserialize mode reply");
matches!(response, types::acs::mgm::response::Response::Ok);
// The device should have been polled once.
assert_eq!(testbench.test_spi_interface().call_count, 1);
let mgm_set = *testbench.handler.shared_mgm_set.lock().unwrap();
assert!(mgm_set.x < 0.001);
assert!(mgm_set.y < 0.001);
assert!(mgm_set.z < 0.001);
assert!(mgm_set.valid);
matches!(testbench.tm_rx.try_recv(), Err(TryRecvError::Empty));
}
#[test]
fn test_normal_handler_mgm_set_conversion() {
let mut testbench = MgmTestbench::new();
let raw_values = MgmLis3RawValues {
x: 1000,
y: -1000,
z: 1000,
};
testbench.test_spi_interface().next_mgm_data = raw_values;
testbench
.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Mode(ModeRequest::SetMode(DeviceMode::Normal)),
))
.unwrap();
testbench.handler.periodic_operation();
// This simulates one cycle for the power switch to update.
testbench
.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::On);
// Now the power switch is updated and the mode request should be completed.
testbench.handler.periodic_operation();
let mgm_set = *testbench.handler.shared_mgm_set.lock().unwrap();
let expected_x =
raw_values.x as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
let expected_y =
raw_values.y as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
let expected_z =
raw_values.z as f32 * GAUSS_TO_MICROTESLA_FACTOR as f32 * FIELD_LSB_PER_GAUSS_4_SENS;
let x_diff = (mgm_set.x - expected_x).abs();
let y_diff = (mgm_set.y - expected_y).abs();
let z_diff = (mgm_set.z - expected_z).abs();
assert!(x_diff < 0.001, "x diff too large: {}", x_diff);
assert!(y_diff < 0.001, "y diff too large: {}", y_diff);
assert!(z_diff < 0.001, "z diff too large: {}", z_diff);
assert!(mgm_set.valid);
}
#[test]
fn test_hk_one_shot_device_off() {
let mut testbench = MgmTestbench::new();
// Device handler is initially off, first set will be invalid.
testbench
.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Hk(HkRequest {
id: mgm::request::HkId::Sensor,
req_type: HkRequestType::OneShot,
}),
))
.unwrap();
testbench.handler.periodic_operation();
// This simulates one cycle for the power switch to update.
testbench
.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::On);
// Now the power switch is updated and the mode request should be completed.
testbench.handler.periodic_operation();
let tm_packet = testbench.tm_rx.try_recv().expect("no mode reply generated");
assert_eq!(tm_packet.tm_header.sender_id, ComponentId::AcsMgm0);
let response =
postcard::from_bytes::<types::acs::mgm::response::Response>(&tm_packet.payload)
.expect("failed to deserialize mode reply");
if let types::acs::mgm::response::Response::Hk(mgm::response::HkResponse::MgmData(data)) =
response
{
assert_eq!(data.valid, false);
assert!(data.x < 0.001);
assert!(data.y < 0.001);
assert!(data.z < 0.001);
} else {
panic!("expected hk response");
}
matches!(testbench.tm_rx.try_recv(), Err(TryRecvError::Empty));
}
#[test]
fn test_hk_device_normal() {
let mut testbench = MgmTestbench::new();
testbench
.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Mode(ModeRequest::SetMode(DeviceMode::Normal)),
))
.unwrap();
// This simulates one cycle for the power switch to update.
testbench
.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::On);
testbench.handler.periodic_operation();
assert_eq!(testbench.handler.mode(), DeviceMode::Normal);
testbench
.tc_tx
.send(create_request_tc(
MgmSelect::_0,
mgm::request::Request::Hk(HkRequest {
id: mgm::request::HkId::Sensor,
req_type: HkRequestType::OneShot,
}),
))
.unwrap();
testbench.handler.periodic_operation();
let mode_tm = testbench.tm_rx.try_recv().expect("no mode reply generated");
assert_eq!(mode_tm.tm_header.sender_id, ComponentId::AcsMgm0);
let response =
postcard::from_bytes::<types::acs::mgm::response::Response>(&mode_tm.payload)
.expect("failed to deserialize mode reply");
matches!(response, types::acs::mgm::response::Response::Ok);
let hk_tm = testbench.tm_rx.try_recv().expect("no hk reply generated");
assert_eq!(hk_tm.tm_header.sender_id, ComponentId::AcsMgm0);
let response = postcard::from_bytes::<types::acs::mgm::response::Response>(&hk_tm.payload)
.expect("failed to deserialize mode reply");
if let types::acs::mgm::response::Response::Hk(mgm::response::HkResponse::MgmData(data)) =
response
{
// Set is now valid.
assert_eq!(data.valid, true);
assert!(data.x < 0.001);
assert!(data.y < 0.001);
assert!(data.z < 0.001);
} else {
panic!("expected hk response");
}
matches!(testbench.tm_rx.try_recv(), Err(TryRecvError::Empty));
}
#[test]
fn test_spi_fault_below_threshold_stays_healthy() {
let mut testbench = MgmTestbench::new();
testbench.switch_to_normal();
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues {
x: -1,
y: -1,
z: -1,
};
// One stuck-bus reading should not be enough to trip SPI_FAULT_THRESHOLD.
testbench.handler.periodic_operation();
assert_eq!(
testbench.health_table.health(ComponentId::AcsMgm0.into()),
None,
"component should not be marked faulty yet"
);
assert!(!testbench.handler.shared_mgm_set.lock().unwrap().valid);
}
#[test]
fn test_spi_fault_above_threshold_marks_component_faulty() {
let mut testbench = MgmTestbench::new();
testbench.switch_to_normal();
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues {
x: -1,
y: -1,
z: -1,
};
// SPI_FAULT_THRESHOLD is exceeded on the (threshold + 1)-th stuck-bus reading.
for _ in 0..SPI_FAULT_THRESHOLD + 1 {
testbench.handler.periodic_operation();
}
assert_eq!(
testbench.health_table.health(ComponentId::AcsMgm0.into()),
Some(HealthState::Faulty)
);
assert!(!testbench.handler.shared_mgm_set.lock().unwrap().valid);
}
#[test]
fn test_spi_fault_above_threshold_commands_device_off() {
let mut testbench = MgmTestbench::new();
testbench.switch_to_normal();
// Drain the switch-on request left over from switch_to_normal().
testbench
.switch_rx
.try_recv()
.expect("no switch-on request sent");
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues {
x: -1,
y: -1,
z: -1,
};
for _ in 0..SPI_FAULT_THRESHOLD + 1 {
testbench.handler.periodic_operation();
}
assert_eq!(
testbench.health_table.health(ComponentId::AcsMgm0.into()),
Some(HealthState::Faulty)
);
// The Off transition was only started on the last iteration above, so it has not sent
// its switch-off request yet: drive one more cycle to let it do so.
testbench.handler.periodic_operation();
let switch_req = testbench
.switch_rx
.try_recv()
.expect("no switch-off request sent after fault");
assert_eq!(switch_req.switch_id, SwitchId::Mgm0);
assert_eq!(switch_req.target_state, SwitchStateBinary::Off);
// Simulate the PCDU acting on the switch-off request.
testbench
.shared_switch_set
.lock()
.unwrap()
.set_switch_state(SwitchId::Mgm0, SwitchState::Off);
testbench.handler.periodic_operation();
assert_eq!(testbench.handler.mode(), DeviceMode::Off);
}
#[test]
fn test_spi_fault_does_not_override_external_control() {
let mut testbench = MgmTestbench::new();
testbench.switch_to_normal();
testbench
.health_table
.set_health(ComponentId::AcsMgm0.into(), HealthState::ExternalControl);
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues {
x: -1,
y: -1,
z: -1,
};
for _ in 0..SPI_FAULT_THRESHOLD + 1 {
testbench.handler.periodic_operation();
}
// Ground took manual control; autonomous FDIR must not override that decision.
assert_eq!(
testbench.health_table.health(ComponentId::AcsMgm0.into()),
Some(HealthState::ExternalControl)
);
}
#[test]
fn test_recovering_from_spi_fault_clears_invalid_data_flag() {
let mut testbench = MgmTestbench::new();
testbench.switch_to_normal();
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues {
x: -1,
y: -1,
z: -1,
};
testbench.handler.periodic_operation();
assert!(!testbench.handler.shared_mgm_set.lock().unwrap().valid);
// Bus recovers before the threshold is exceeded.
testbench.test_spi_interface().next_mgm_data = MgmLis3RawValues::default();
testbench.handler.periodic_operation();
assert_eq!(
testbench.health_table.health(ComponentId::AcsMgm0.into()),
None
);
assert!(testbench.handler.shared_mgm_set.lock().unwrap().valid);
}
}