Merge pull request 'updated flashloader test applications' (#74) from update-flashloader-testapps into main

Reviewed-on: #74

README.md

@@ -34,6 +34,9 @@ It also contains the following helper crates:
   [`RTIC`](https://rtic.rs/2/book/en/) and [`embassy`](https://github.com/embassy-rs/embassy)
   native Rust RTOSes.
 
+The majority of the HAL implementation and the Embassy-rs support are contained in the external
+[`vorago-shared-periphs`](https://egit.irs.uni-stuttgart.de/rust/vorago-shared-periphs) crate.
+
 ## Using the `.cargo/config.toml` file
 
 Use the following command to have a starting `config.toml` file

board-tests/src/main.rs

@@ -35,6 +35,7 @@ enum TestCase {
     Pulse,
     // Tie PA0, PA1 and PA3 to an oscilloscope
     DelayGpio,
+    // PA0 can be checked with an oscillsope to verify timing correctness.
     DelayMs,
 }
 
@@ -121,7 +122,6 @@ fn main() -> ! {
             assert_eq!(mmio_porta.read_perid(), 0x004007e1);
         }
         TestCase::Pulse => {
-            // TODO: Fix
             let mut output_pulsed = Output::new(pinsa.pa0, PinState::Low);
             output_pulsed.configure_pulse_mode(true, PinState::Low);
             defmt::info!("Pulsing high 10 times..");
@@ -162,17 +162,16 @@ fn main() -> ! {
             }
             let ahb_freq: Hertz = 50.MHz();
             let mut syst_delay = cortex_m::delay::Delay::new(cp.SYST, ahb_freq.raw());
-            // Test usecond delay using both TIM peripheral and SYST. Use the release image if you
-            // want to verify the timings!
-            loop {
-                pa0.toggle();
-                delay_timer.delay_us(50);
-                pa0.toggle();
-                delay_timer.delay_us(50);
+            // Release image should be used to verify timings for pin PA0
+            for _ in 0..5 {
                 pa0.toggle();
                 syst_delay.delay_us(50);
                 pa0.toggle();
                 syst_delay.delay_us(50);
+                pa0.toggle();
+                delay_timer.delay_us(50);
+                pa0.toggle();
+                delay_timer.delay_us(50);
             }
         }
     }

bootloader/README.md

@@ -12,8 +12,8 @@ The bootloader uses the following memory map:
 | 0x0 | Bootloader start | code up to 0x2FFE bytes |
 | 0x2FFE | Bootloader CRC | half-word |
 | 0x3000 | App image A start | code up to 0xE7F4 (~59K) bytes |
-| 0x117F8 | App image A CRC check length | word |
-| 0x117FC | App image A CRC check value | word |
+| 0x117F4 | App image A CRC check length | word |
+| 0x117F8 | App image A CRC check value | word |
 | 0x117FC | App image B start | code up to 0xE7F4 (~59K) bytes |
 | 0x1FFF0 | App image B CRC check length | word |
 | 0x1FFF4 | App image B CRC check value | word |

examples/embassy/Cargo.toml

@@ -30,7 +30,7 @@ embassy-executor = { version = "0.7", features = [
 ]}
 
 va108xx-hal = { version = "0.11", path = "../../va108xx-hal", features = ["defmt"] }
-va108xx-embassy = { version = "0.2" }
+va108xx-embassy = { version = "0.2", path = "../../va108xx-embassy" }
 
 [features]
 default = ["ticks-hz-1_000", "va108xx-embassy/irq-oc30-oc31"]

examples/embassy/src/bin/async-gpio.rs

@@ -59,16 +59,10 @@ static CHANNEL_PB22_TO_PB23: Channel<ThreadModeRawMutex, GpioCmd, 3> = Channel::
 async fn main(spawner: Spawner) {
     defmt::println!("-- VA108xx Async GPIO Demo --");
 
-    let mut dp = pac::Peripherals::take().unwrap();
+    let dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    va108xx_embassy::init(
-        &mut dp.sysconfig,
-        &dp.irqsel,
-        SYSCLK_FREQ,
-        dp.tim23,
-        dp.tim22,
-    );
+    va108xx_embassy::init(dp.tim23, dp.tim22, SYSCLK_FREQ);
 
     let porta = PinsA::new(dp.porta);
     let portb = PinsB::new(dp.portb);

examples/embassy/src/bin/async-uart-rx.rs

@@ -52,16 +52,10 @@ static CONSUMER_UART_B: Mutex<RefCell<Option<Consumer<u8, 256>>>> = Mutex::new(R
 async fn main(spawner: Spawner) {
     defmt::println!("-- VA108xx Async UART RX Demo --");
 
-    let mut dp = pac::Peripherals::take().unwrap();
+    let dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    va108xx_embassy::init(
-        &mut dp.sysconfig,
-        &dp.irqsel,
-        SYSCLK_FREQ,
-        dp.tim23,
-        dp.tim22,
-    );
+    va108xx_embassy::init(dp.tim23, dp.tim22, SYSCLK_FREQ);
 
     let porta = PinsA::new(dp.porta);
     let mut led0 = Output::new(porta.pa10, PinState::Low);

examples/embassy/src/bin/async-uart-tx.rs

@@ -39,16 +39,10 @@ const STR_LIST: &[&str] = &[
 async fn main(_spawner: Spawner) {
     defmt::println!("-- VA108xx Async UART TX Demo --");
 
-    let mut dp = pac::Peripherals::take().unwrap();
+    let dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    va108xx_embassy::init(
-        &mut dp.sysconfig,
-        &dp.irqsel,
-        SYSCLK_FREQ,
-        dp.tim23,
-        dp.tim22,
-    );
+    va108xx_embassy::init(dp.tim23, dp.tim22, SYSCLK_FREQ);
 
     let porta = PinsA::new(dp.porta);
 

examples/embassy/src/main.rs

@@ -26,23 +26,21 @@ const SYSCLK_FREQ: Hertz = Hertz::from_raw(50_000_000);
 async fn main(_spawner: Spawner) {
     defmt::println!("-- VA108xx Embassy Demo --");
 
-    let mut dp = pac::Peripherals::take().unwrap();
+    let dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
     cfg_if::cfg_if! {
         if #[cfg(not(feature = "custom-irqs"))] {
             va108xx_embassy::init(
-                &mut dp.sysconfig,
-                &dp.irqsel,
-                SYSCLK_FREQ,
                 dp.tim23,
                 dp.tim22,
+                SYSCLK_FREQ,
             );
         } else {
             va108xx_embassy::init_with_custom_irqs(
-                SYSCLK_FREQ,
                 dp.tim23,
                 dp.tim22,
+                SYSCLK_FREQ,
                 pac::Interrupt::OC23,
                 pac::Interrupt::OC24,
             );

flashloader/slot-a-blinky/Cargo.toml

@@ -10,7 +10,7 @@ cortex-m-rt = "0.7"
 panic-rtt-target = { version = "0.1.3" }
 rtt-target = { version = "0.5" }
 embedded-hal = "1"
-va108xx-hal = { version = "0.10.0" }
+va108xx-hal = { version = "0.11" }
 
 [profile.dev]
 codegen-units = 1

flashloader/slot-a-blinky/src/main.rs

@@ -3,7 +3,7 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use embedded_hal::{delay::DelayNs, digital::StatefulOutputPin};
+use embedded_hal::delay::DelayNs;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
 use va108xx_hal::{gpio::PinsA, pac, prelude::*, timer::CountdownTimer};
@@ -15,11 +15,11 @@ fn main() -> ! {
 
     let mut dp = pac::Peripherals::take().unwrap();
     let mut timer = CountdownTimer::new(&mut dp.sysconfig, 50.MHz(), dp.tim0);
-    let porta = PinsA::new(&mut dp.sysconfig, Some(dp.ioconfig), dp.porta);
+    let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
     let mut led1 = porta.pa10.into_readable_push_pull_output();
 
     loop {
-        led1.toggle().ok();
+        led1.toggle();
         timer.delay_ms(500);
     }
 }

flashloader/slot-b-blinky/Cargo.toml

@@ -10,7 +10,7 @@ cortex-m-rt = "0.7"
 panic-rtt-target = { version = "0.1.3" }
 rtt-target = { version = "0.5" }
 embedded-hal = "1"
-va108xx-hal = { version = "0.10.0" }
+va108xx-hal = { version = "0.11" }
 
 [profile.dev]
 codegen-units = 1

flashloader/slot-b-blinky/src/main.rs

@@ -3,7 +3,7 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use embedded_hal::{delay::DelayNs, digital::StatefulOutputPin};
+use embedded_hal::delay::DelayNs;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
 use va108xx_hal::{gpio::PinsA, pac, prelude::*, timer::CountdownTimer};
@@ -15,11 +15,11 @@ fn main() -> ! {
 
     let mut dp = pac::Peripherals::take().unwrap();
     let mut timer = CountdownTimer::new(&mut dp.sysconfig, 50.MHz(), dp.tim0);
-    let porta = PinsA::new(&mut dp.sysconfig, Some(dp.ioconfig), dp.porta);
+    let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
     let mut led2 = porta.pa7.into_readable_push_pull_output();
 
     loop {
-        led2.toggle().ok();
+        led2.toggle();
         timer.delay_ms(1000);
     }
 }

va108xx-embassy/Cargo.toml

@@ -11,7 +11,7 @@ keywords = ["no-std", "hal", "cortex-m", "vorago", "va108xx"]
 categories = ["aerospace", "embedded", "no-std", "hardware-support"]
 
 [dependencies]
-vorago-shared-periphs = { path = "../../vorago-shared-periphs", features = ["vor1x"] }
+vorago-shared-periphs = { git = "https://egit.irs.uni-stuttgart.de/rust/vorago-shared-periphs.git", features = ["vor1x"] }
 va108xx-hal = { path = "../va108xx-hal" }
 
 [features]

va108xx-embassy/src/lib.rs

@@ -88,9 +88,9 @@ embassy_time_driver_irqs!(timekeeper_irq = OC29, alarm_irq = OC28);
 /// default case.
 #[cfg(feature = "irqs-in-lib")]
 pub fn init<TimekeeperTim: TimMarker, AlarmTim: TimMarker>(
-    sysclk: Hertz,
     timekeeper_tim: TimekeeperTim,
     alarm_tim: AlarmTim,
+    sysclk: Hertz,
 ) {
     time_driver().__init(sysclk, timekeeper_tim, alarm_tim, TIMEKEEPER_IRQ, ALARM_IRQ)
 }
@@ -99,9 +99,9 @@ pub fn init<TimekeeperTim: TimMarker, AlarmTim: TimMarker>(
 ///
 /// Requires an explicit [pac::Interrupt] argument for the timekeeper and alarm IRQs.
 pub fn init_with_custom_irqs<TimekeeperTim: TimMarker, AlarmTim: TimMarker>(
-    sysclk: Hertz,
     timekeeper_tim: TimekeeperTim,
     alarm_tim: AlarmTim,
+    sysclk: Hertz,
     timekeeper_irq: pac::Interrupt,
     alarm_irq: pac::Interrupt,
 ) {

va108xx-hal/Cargo.toml

@@ -12,7 +12,7 @@ categories = ["aerospace", "embedded", "no-std", "hardware-support"]
 
 [dependencies]
 cortex-m = { version = "0.7", features = ["critical-section-single-core"]}
-vorago-shared-periphs = { path = "../../vorago-shared-periphs", features = ["vor1x"] }
+vorago-shared-periphs = { git = "https://egit.irs.uni-stuttgart.de/rust/vorago-shared-periphs.git", features = ["vor1x"] }
 fugit = "0.3"
 thiserror = { version = "2", default-features = false }
 va108xx = { version = "0.5", default-features = false, features = ["critical-section", "defmt"] }

va108xx-hal/src/spi/mod.rs

@@ -1,8 +1,8 @@
 //! API for the SPI peripheral.
 //!
 //! The main abstraction provided by this module is the [Spi] an structure.
-//! It provides the [embedded_hal::spi] traits, but also offer a low level interface
-//! via the [SpiLowLevel] trait.
+//! It provides the [SpiBus trait](https://docs.rs/embedded-hal/latest/embedded_hal/spi/trait.SpiBus.html),
+//! but also offer a low level interface via the [SpiLowLevel] trait.
 //!
 //! ## Examples
 //!