Move to released packages, done

Reviewed-on: #67

.cargo/def-config.toml

@@ -4,10 +4,9 @@
 # runner = "arm-none-eabi-gdb -q -x openocd.gdb"
 # runner = "gdb-multiarch -q -x openocd.gdb"
 # runner = "gdb -q -x openocd.gdb"
-runner = "gdb-multiarch -q -x jlink.gdb"
+# runner = "gdb-multiarch -q -x jlink.gdb"
 
-# Probe-rs is currently problematic: https://github.com/probe-rs/probe-rs/issues/2567
-# runner = "probe-rs run --chip VA108xx --chip-description-path ./scripts/VA108xx_Series.yaml"
+runner = "probe-rs run --chip VA108xx_RAM --protocol jtag"
 # runner = ["probe-rs", "run", "--chip", "$CHIP", "--log-format", "{L} {s}"]
 
 rustflags = [

.github/workflows/ci.yml

@@ -12,6 +12,8 @@ jobs:
           targets: "thumbv6m-none-eabi"
       - run: cargo check --target thumbv6m-none-eabi
       - run: cargo check --target thumbv6m-none-eabi --examples
+      - run: cargo check -p va108xx --target thumbv6m-none-eabi --all-features
+      - run: cargo check -p va108xx-hal --target thumbv6m-none-eabi --features "defmt"
 
   test:
     name: Run Tests
@@ -39,8 +41,8 @@ jobs:
     steps:
       - uses: actions/checkout@v4
       - uses: dtolnay/rust-toolchain@nightly
-      - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc -p va108xx
-      - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc -p va108xx-hal
+      - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc -p va108xx --all-features
+      - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc -p va108xx-hal --all-features
       - run: RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options" cargo +nightly doc -p vorago-reb1
 
   clippy:

README.md

@@ -60,14 +60,56 @@ You can then adapt the files in `.vscode` to your needs.
 You can use CLI or VS Code for flashing, running and debugging. In any case, take
 care of installing the pre-requisites first.
 
-### Pre-Requisites
+### Using CLI with probe-rs
+
+Install [probe-rs](https://probe.rs/docs/getting-started/installation/) first.
+
+You can use `probe-rs` to run the software and display RTT log output. However, debugging does not
+work yet.
+
+After installation, you can run the following command
+
+```sh
+probe-rs run --chip VA108xx_RAM --protocol jtag target/thumbv6m-none-eabi/debug/examples/blinky
+```
+
+to flash and run the blinky program on the RAM. There is also a `VA108xx` chip target
+available for persistent flashing.
+
+Runner configuration avilable in the `.cargo/def-config.toml` file to use `probe-rs` for
+convenience.
+
+### Using VS Code
+
+Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
+the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
+Please make sure that [`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
+are installed as well.
+
+Some sample configuration files for VS code were provided and can be used by running
+`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
+to automatically rebuild and flash your application.
+
+If you would like to use a custom GDB application, you can specify the gdb binary in the following
+configuration variables in your `settings.json`:
+
+- `"cortex-debug.gdbPath"`
+- `"cortex-debug.gdbPath.linux"`
+- `"cortex-debug.gdbPath.windows"`
+- `"cortex-debug.gdbPath.osx"`
+
+The provided VS Code configurations also provide an integrated RTT logger, which you can access
+via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
+work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.
+
+### Using CLI with GDB and Segger J-Link Tools
+
+Install the following two tools first:
 
 1. [SEGGER J-Link tools](https://www.segger.com/downloads/jlink/) installed
 2. [gdb-multiarch](https://packages.debian.org/sid/gdb-multiarch) or similar
    cross-architecture debugger installed. All commands here assume `gdb-multiarch`.
 
-### Using CLI
-
 You can build the blinky example application with the following command
 
 ```sh
@@ -101,25 +143,8 @@ runner = "gdb-multiarch -q -x jlink/jlink.gdb"
 After that, you can simply use `cargo run --example blinky` to flash the blinky
 example.
 
-### Using VS Code
+### Using the RTT Viewer
 
-Assuming a working debug connection to your VA108xx board, you can debug using VS Code with
-the [`Cortex-Debug` plugin](https://marketplace.visualstudio.com/items?itemName=marus25.cortex-debug).
-Please make sure that [`objdump-multiarch` and `nm-multiarch`](https://forums.raspberrypi.com/viewtopic.php?t=333146)
-are installed as well.
-
-Some sample configuration files for VS code were provided and can be used by running
-`cp -rT vscode .vscode` like specified above. After that, you can use `Run and Debug`
-to automatically rebuild and flash your application.
-
-If you would like to use a custom GDB application, you can specify the gdb binary in the following
-configuration variables in your `settings.json`:
-
-- `"cortex-debug.gdbPath"`
-- `"cortex-debug.gdbPath.linux"`
-- `"cortex-debug.gdbPath.windows"`
-- `"cortex-debug.gdbPath.osx"`
-
-The provided VS Code configurations also provide an integrated RTT logger, which you can access
-via the terminal at `RTT Ch:0 console`. In order for the RTT block address detection to
-work properly, `objdump-multiarch` and `nm-multiarch` need to be installed.
+The Segger RTT viewer can be used to display log messages received from the target. The base
+address for the RTT block placement is 0x10000000. It is recommended to use a search range of
+0x1000 around that base address when using the RTT viewer.

board-tests/Cargo.toml

@@ -14,6 +14,6 @@ embedded-hal-nb = "1"
 embedded-io = "0.6"
 
 [dependencies.va108xx-hal]
-path = "../va108xx-hal"
+version = "0.10.0"
 features = ["rt"]
 

board-tests/src/main.rs

@@ -6,10 +6,7 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use embedded_hal::{
-    delay::DelayNs,
-    digital::{InputPin, OutputPin, StatefulOutputPin},
-};
+use embedded_hal::delay::DelayNs;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
 use va108xx_hal::{
@@ -67,35 +64,35 @@ fn main() -> ! {
         TestCase::TestBasic => {
             // Tie PORTA[0] to PORTA[1] for these tests!
             let mut out = pinsa.pa0.into_readable_push_pull_output();
-            let mut input = pinsa.pa1.into_floating_input();
-            out.set_high().unwrap();
-            assert!(input.is_high().unwrap());
-            out.set_low().unwrap();
-            assert!(input.is_low().unwrap());
+            let input = pinsa.pa1.into_floating_input();
+            out.set_high();
+            assert!(input.is_high());
+            out.set_low();
+            assert!(input.is_low());
         }
         TestCase::TestPullup => {
             // Tie PORTA[0] to PORTA[1] for these tests!
-            let mut input = pinsa.pa1.into_pull_up_input();
-            assert!(input.is_high().unwrap());
+            let input = pinsa.pa1.into_pull_up_input();
+            assert!(input.is_high());
             let mut out = pinsa.pa0.into_readable_push_pull_output();
-            out.set_low().unwrap();
-            assert!(input.is_low().unwrap());
-            out.set_high().unwrap();
-            assert!(input.is_high().unwrap());
+            out.set_low();
+            assert!(input.is_low());
+            out.set_high();
+            assert!(input.is_high());
             out.into_floating_input();
-            assert!(input.is_high().unwrap());
+            assert!(input.is_high());
         }
         TestCase::TestPulldown => {
             // Tie PORTA[0] to PORTA[1] for these tests!
-            let mut input = pinsa.pa1.into_pull_down_input();
-            assert!(input.is_low().unwrap());
+            let input = pinsa.pa1.into_pull_down_input();
+            assert!(input.is_low());
             let mut out = pinsa.pa0.into_push_pull_output();
-            out.set_low().unwrap();
-            assert!(input.is_low().unwrap());
-            out.set_high().unwrap();
-            assert!(input.is_high().unwrap());
+            out.set_low();
+            assert!(input.is_low());
+            out.set_high();
+            assert!(input.is_high());
             out.into_floating_input();
-            assert!(input.is_low().unwrap());
+            assert!(input.is_low());
         }
         TestCase::TestMask => {
             // Tie PORTA[0] to PORTA[1] for these tests!
@@ -110,11 +107,11 @@ fn main() -> ! {
         TestCase::PortB => {
             // Tie PORTB[22] to PORTB[23] for these tests!
             let mut out = pinsb.pb22.into_readable_push_pull_output();
-            let mut input = pinsb.pb23.into_floating_input();
-            out.set_high().unwrap();
-            assert!(input.is_high().unwrap());
-            out.set_low().unwrap();
-            assert!(input.is_low().unwrap());
+            let input = pinsb.pb23.into_floating_input();
+            out.set_high();
+            assert!(input.is_high());
+            out.set_low();
+            assert!(input.is_low());
         }
         TestCase::Perid => {
             assert_eq!(PinsA::get_perid(), 0x004007e1);
@@ -122,34 +119,31 @@ fn main() -> ! {
         }
         TestCase::Pulse => {
             let mut output_pulsed = pinsa.pa0.into_push_pull_output();
-            output_pulsed.pulse_mode(true, PinState::Low);
+            output_pulsed.configure_pulse_mode(true, PinState::Low);
             rprintln!("Pulsing high 10 times..");
-            output_pulsed.set_low().unwrap();
+            output_pulsed.set_low();
             for _ in 0..10 {
-                output_pulsed.set_high().unwrap();
+                output_pulsed.set_high();
                 cortex_m::asm::delay(25_000_000);
             }
-            output_pulsed.pulse_mode(true, PinState::High);
+            output_pulsed.configure_pulse_mode(true, PinState::High);
             rprintln!("Pulsing low 10 times..");
             for _ in 0..10 {
-                output_pulsed.set_low().unwrap();
+                output_pulsed.set_low();
                 cortex_m::asm::delay(25_000_000);
             }
         }
         TestCase::DelayGpio => {
-            let mut out_0 = pinsa
-                .pa0
-                .into_readable_push_pull_output()
-                .delay(true, false);
-            let mut out_1 = pinsa
-                .pa1
-                .into_readable_push_pull_output()
-                .delay(false, true);
-            let mut out_2 = pinsa.pa3.into_readable_push_pull_output().delay(true, true);
+            let mut out_0 = pinsa.pa0.into_readable_push_pull_output();
+            out_0.configure_delay(true, false);
+            let mut out_1 = pinsa.pa1.into_readable_push_pull_output();
+            out_1.configure_delay(false, true);
+            let mut out_2 = pinsa.pa3.into_readable_push_pull_output();
+            out_2.configure_delay(true, true);
             for _ in 0..20 {
-                out_0.toggle().unwrap();
-                out_1.toggle().unwrap();
-                out_2.toggle().unwrap();
+                out_0.toggle();
+                out_1.toggle();
+                out_2.toggle();
                 cortex_m::asm::delay(25_000_000);
             }
         }
@@ -162,18 +156,18 @@ fn main() -> ! {
                 dp.tim0,
             );
             for _ in 0..5 {
-                led1.toggle().ok();
+                led1.toggle();
                 ms_timer.delay_ms(500);
-                led1.toggle().ok();
+                led1.toggle();
                 ms_timer.delay_ms(500);
             }
 
             let mut delay_timer = CountdownTimer::new(&mut dp.sysconfig, 50.MHz(), dp.tim1);
             let mut pa0 = pinsa.pa0.into_readable_push_pull_output();
             for _ in 0..5 {
-                led1.toggle().ok();
+                led1.toggle();
                 delay_timer.delay_ms(500);
-                led1.toggle().ok();
+                led1.toggle();
                 delay_timer.delay_ms(500);
             }
             let ahb_freq: Hertz = 50.MHz();
@@ -181,13 +175,13 @@ fn main() -> ! {
             // Test usecond delay using both TIM peripheral and SYST. Use the release image if you
             // want to verify the timings!
             loop {
-                pa0.toggle().ok();
+                pa0.toggle();
                 delay_timer.delay_us(50);
-                pa0.toggle().ok();
+                pa0.toggle();
                 delay_timer.delay_us(50);
-                pa0.toggle_with_toggle_reg();
+                pa0.toggle();
                 syst_delay.delay_us(50);
-                pa0.toggle_with_toggle_reg();
+                pa0.toggle();
                 syst_delay.delay_us(50);
             }
         }
@@ -195,7 +189,7 @@ fn main() -> ! {
 
     rprintln!("Test success");
     loop {
-        led1.toggle().ok();
+        led1.toggle();
         cortex_m::asm::delay(25_000_000);
     }
 }

bootloader/Cargo.toml

@@ -15,12 +15,10 @@ num_enum = { version = "0.7", default-features = false }
 static_assertions = "1"
 
 [dependencies.va108xx-hal]
-version = "0.9"
-# path = "../va108xx-hal"
+version = "0.10"
 
 [dependencies.vorago-reb1]
-version = "0.7"
-# path = "../vorago-reb1"
+version = "0.8"
 
 [features]
 default = []

defmt-testapp/Cargo.toml

@@ -27,10 +27,8 @@ version = "1"
 features = ["cortex-m-systick"]
 
 [dependencies.va108xx-hal]
-version = "0.6"
-path = "../va108xx-hal"
+version = "0.10"
 features = ["rt", "defmt"]
 
 [dependencies.va108xx]
-version = "0.3"
-path = "../va108xx"
+version = "0.5"

examples/embassy/Cargo.toml

@@ -27,8 +27,8 @@ embassy-executor = { version = "0.7", features = [
   "executor-interrupt"
 ]}
 
-va108xx-hal = "0.9"
-va108xx-embassy = "0.1"
+va108xx-hal = { version = "0.10" }
+va108xx-embassy = { version = "0.2" }
 
 [features]
 default = ["ticks-hz-1_000", "va108xx-embassy/irq-oc30-oc31"]

examples/embassy/src/bin/async-gpio.rs

@@ -9,12 +9,12 @@ use embassy_executor::Spawner;
 use embassy_sync::channel::{Receiver, Sender};
 use embassy_sync::{blocking_mutex::raw::ThreadModeRawMutex, channel::Channel};
 use embassy_time::{Duration, Instant, Timer};
-use embedded_hal::digital::{InputPin, OutputPin, StatefulOutputPin};
 use embedded_hal_async::digital::Wait;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_embassy::embassy;
-use va108xx_hal::gpio::{on_interrupt_for_asynch_gpio, InputDynPinAsync, InputPinAsync, PinsB};
+use va108xx_hal::gpio::{
+    on_interrupt_for_async_gpio_for_port, InputDynPinAsync, InputPinAsync, PinsB, Port,
+};
 use va108xx_hal::{
     gpio::{DynPin, PinsA},
     pac::{self, interrupt},
@@ -64,15 +64,13 @@ async fn main(spawner: Spawner) {
     let mut dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    unsafe {
-        embassy::init(
-            &mut dp.sysconfig,
-            &dp.irqsel,
-            SYSCLK_FREQ,
-            dp.tim23,
-            dp.tim22,
-        )
-    };
+    va108xx_embassy::init(
+        &mut dp.sysconfig,
+        &dp.irqsel,
+        SYSCLK_FREQ,
+        dp.tim23,
+        dp.tim22,
+    );
 
     let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
     let portb = PinsB::new(&mut dp.sysconfig, dp.portb);
@@ -114,7 +112,7 @@ async fn main(spawner: Spawner) {
 
     rprintln!("Example done, toggling LED0");
     loop {
-        led0.toggle().unwrap();
+        led0.toggle();
         Timer::after(Duration::from_millis(500)).await;
     }
 }
@@ -244,15 +242,16 @@ async fn output_task(
 }
 
 // PB22 to PB23 can be handled by both OC10 and OC11 depending on configuration.
-
 #[interrupt]
 #[allow(non_snake_case)]
 fn OC10() {
-    on_interrupt_for_asynch_gpio();
+    on_interrupt_for_async_gpio_for_port(Port::A);
+    on_interrupt_for_async_gpio_for_port(Port::B);
 }
 
+// This interrupt only handles PORT B interrupts.
 #[interrupt]
 #[allow(non_snake_case)]
 fn OC11() {
-    on_interrupt_for_asynch_gpio();
+    on_interrupt_for_async_gpio_for_port(Port::B);
 }

examples/embassy/src/bin/async-uart-rx.rs

@@ -18,21 +18,19 @@ use core::cell::RefCell;
 use critical_section::Mutex;
 use embassy_executor::Spawner;
 use embassy_time::Instant;
-use embedded_hal::digital::StatefulOutputPin;
 use embedded_io::Write;
 use embedded_io_async::Read;
 use heapless::spsc::{Consumer, Producer, Queue};
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_embassy::embassy;
 use va108xx_hal::{
     gpio::PinsA,
     pac::{self, interrupt},
     prelude::*,
     uart::{
-        self, on_interrupt_uart_b_overwriting,
-        rx_asynch::{on_interrupt_uart_a, RxAsync},
-        RxAsyncSharedConsumer, Tx,
+        self, on_interrupt_rx_overwriting,
+        rx_asynch::{on_interrupt_rx, RxAsync},
+        Bank, RxAsyncOverwriting, Tx,
     },
     InterruptConfig,
 };
@@ -57,15 +55,13 @@ async fn main(spawner: Spawner) {
     let mut dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    unsafe {
-        embassy::init(
-            &mut dp.sysconfig,
-            &dp.irqsel,
-            SYSCLK_FREQ,
-            dp.tim23,
-            dp.tim22,
-        );
-    }
+    va108xx_embassy::init(
+        &mut dp.sysconfig,
+        &dp.irqsel,
+        SYSCLK_FREQ,
+        dp.tim23,
+        dp.tim22,
+    );
 
     let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
     let mut led0 = porta.pa10.into_readable_push_pull_output();
@@ -106,16 +102,16 @@ async fn main(spawner: Spawner) {
         *CONSUMER_UART_B.borrow(cs).borrow_mut() = Some(cons_uart_b);
     });
     let mut async_rx_uart_a = RxAsync::new(rx_uart_a, cons_uart_a);
-    let async_rx_uart_b = RxAsyncSharedConsumer::new(rx_uart_b, &CONSUMER_UART_B);
+    let async_rx_uart_b = RxAsyncOverwriting::new(rx_uart_b, &CONSUMER_UART_B);
     spawner
         .spawn(uart_b_task(async_rx_uart_b, tx_uart_b))
         .unwrap();
     let mut buf = [0u8; 256];
     loop {
         rprintln!("Current time UART A: {}", Instant::now().as_secs());
-        led0.toggle().ok();
-        led1.toggle().ok();
-        led2.toggle().ok();
+        led0.toggle();
+        led1.toggle();
+        led2.toggle();
         let read_bytes = async_rx_uart_a.read(&mut buf).await.unwrap();
         let read_str = core::str::from_utf8(&buf[..read_bytes]).unwrap();
         rprintln!(
@@ -128,7 +124,7 @@ async fn main(spawner: Spawner) {
 }
 
 #[embassy_executor::task]
-async fn uart_b_task(mut async_rx: RxAsyncSharedConsumer<pac::Uartb, 256>, mut tx: Tx<pac::Uartb>) {
+async fn uart_b_task(mut async_rx: RxAsyncOverwriting<pac::Uartb, 256>, mut tx: Tx<pac::Uartb>) {
     let mut buf = [0u8; 256];
     loop {
         rprintln!("Current time UART B: {}", Instant::now().as_secs());
@@ -149,7 +145,7 @@ async fn uart_b_task(mut async_rx: RxAsyncSharedConsumer<pac::Uartb, 256>, mut t
 fn OC2() {
     let mut prod =
         critical_section::with(|cs| PRODUCER_UART_A.borrow(cs).borrow_mut().take().unwrap());
-    let errors = on_interrupt_uart_a(&mut prod);
+    let errors = on_interrupt_rx(Bank::A, &mut prod);
     critical_section::with(|cs| *PRODUCER_UART_A.borrow(cs).borrow_mut() = Some(prod));
     // In a production app, we could use a channel to send the errors to the main task.
     if let Err(errors) = errors {
@@ -162,7 +158,7 @@ fn OC2() {
 fn OC3() {
     let mut prod =
         critical_section::with(|cs| PRODUCER_UART_B.borrow(cs).borrow_mut().take().unwrap());
-    let errors = on_interrupt_uart_b_overwriting(&mut prod, &CONSUMER_UART_B);
+    let errors = on_interrupt_rx_overwriting(Bank::B, &mut prod, &CONSUMER_UART_B);
     critical_section::with(|cs| *PRODUCER_UART_B.borrow(cs).borrow_mut() = Some(prod));
     // In a production app, we could use a channel to send the errors to the main task.
     if let Err(errors) = errors {

examples/embassy/src/bin/async-uart-tx.rs

@@ -12,16 +12,14 @@
 #![no_main]
 use embassy_executor::Spawner;
 use embassy_time::{Duration, Instant, Ticker};
-use embedded_hal::digital::StatefulOutputPin;
 use embedded_io_async::Write;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_embassy::embassy;
 use va108xx_hal::{
     gpio::PinsA,
     pac::{self, interrupt},
     prelude::*,
-    uart::{self, on_interrupt_uart_a_tx, TxAsync},
+    uart::{self, on_interrupt_tx, Bank, TxAsync},
     InterruptConfig,
 };
 
@@ -43,15 +41,13 @@ async fn main(_spawner: Spawner) {
     let mut dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    unsafe {
-        embassy::init(
-            &mut dp.sysconfig,
-            &dp.irqsel,
-            SYSCLK_FREQ,
-            dp.tim23,
-            dp.tim22,
-        );
-    }
+    va108xx_embassy::init(
+        &mut dp.sysconfig,
+        &dp.irqsel,
+        SYSCLK_FREQ,
+        dp.tim23,
+        dp.tim22,
+    );
 
     let porta = PinsA::new(&mut dp.sysconfig, dp.porta);
     let mut led0 = porta.pa10.into_readable_push_pull_output();
@@ -75,9 +71,9 @@ async fn main(_spawner: Spawner) {
     let mut idx = 0;
     loop {
         rprintln!("Current time: {}", Instant::now().as_secs());
-        led0.toggle().ok();
-        led1.toggle().ok();
-        led2.toggle().ok();
+        led0.toggle();
+        led1.toggle();
+        led2.toggle();
         let _written = async_tx
             .write(STR_LIST[idx].as_bytes())
             .await
@@ -93,5 +89,5 @@ async fn main(_spawner: Spawner) {
 #[interrupt]
 #[allow(non_snake_case)]
 fn OC2() {
-    on_interrupt_uart_a_tx();
+    on_interrupt_tx(Bank::A);
 }

examples/embassy/src/main.rs

@@ -2,10 +2,8 @@
 #![no_main]
 use embassy_executor::Spawner;
 use embassy_time::{Duration, Instant, Ticker};
-use embedded_hal::digital::StatefulOutputPin;
 use panic_rtt_target as _;
 use rtt_target::{rprintln, rtt_init_print};
-use va108xx_embassy::embassy;
 
 cfg_if::cfg_if! {
     if #[cfg(feature = "custom-irqs")] {
@@ -28,27 +26,25 @@ async fn main(_spawner: Spawner) {
     let mut dp = pac::Peripherals::take().unwrap();
 
     // Safety: Only called once here.
-    unsafe {
-        cfg_if::cfg_if! {
-            if #[cfg(not(feature = "custom-irqs"))] {
-                embassy::init(
-                    &mut dp.sysconfig,
-                    &dp.irqsel,
-                    SYSCLK_FREQ,
-                    dp.tim23,
-                    dp.tim22,
-                );
-            } else {
-                embassy::init_with_custom_irqs(
-                    &mut dp.sysconfig,
-                    &dp.irqsel,
-                    SYSCLK_FREQ,
-                    dp.tim23,
-                    dp.tim22,
-                    pac::Interrupt::OC23,
-                    pac::Interrupt::OC24,
-                );
-            }
+    cfg_if::cfg_if! {
+        if #[cfg(not(feature = "custom-irqs"))] {
+            va108xx_embassy::init(
+                &mut dp.sysconfig,
+                &dp.irqsel,
+                SYSCLK_FREQ,
+                dp.tim23,
+                dp.tim22,
+            );
+        } else {
+            va108xx_embassy::init_with_custom_irqs(
+                &mut dp.sysconfig,
+                &dp.irqsel,
+                SYSCLK_FREQ,
+                dp.tim23,
+                dp.tim22,
+                pac::Interrupt::OC23,
+                pac::Interrupt::OC24,
+            );
         }
     }
 
@@ -60,8 +56,8 @@ async fn main(_spawner: Spawner) {
     loop {
         ticker.next().await;
         rprintln!("Current time: {}", Instant::now().as_secs());
-        led0.toggle().ok();
-        led1.toggle().ok();
-        led2.toggle().ok();
+        led0.toggle();
+        led1.toggle();
+        led2.toggle();
     }
 }

examples/rtic/Cargo.toml

@@ -22,5 +22,5 @@ rtic-sync = { version = "1.3", features = ["defmt-03"] }
 once_cell = {version = "1", default-features = false, features = ["critical-section"]}
 ringbuf = { version = "0.4.7", default-features = false, features = ["portable-atomic"] }
 
-va108xx-hal = "0.9"
-vorago-reb1 = "0.7"
+va108xx-hal = { version = "0.10" }
+vorago-reb1 = { version = "0.8" }

examples/rtic/src/bin/blinky-button-rtic.rs

@@ -69,18 +69,16 @@ mod app {
 
         // Configure an edge interrupt on the button and route it to interrupt vector 15
         let mut button = Button::new(pinsa.pa11.into_floating_input());
-        button.configure_edge_interrupt(
-            edge_irq,
-            InterruptConfig::new(pac::interrupt::OC15, true, true),
-            Some(&mut dp.sysconfig),
-            Some(&mut dp.irqsel),
-        );
 
         if mode == PressMode::Toggle {
             // This filter debounces the switch for edge based interrupts
             button.configure_filter_type(FilterType::FilterFourClockCycles, FilterClkSel::Clk1);
             set_clk_div_register(&mut dp.sysconfig, FilterClkSel::Clk1, 50_000);
         }
+        button.configure_and_enable_edge_interrupt(
+            edge_irq,
+            InterruptConfig::new(pac::interrupt::OC15, true, true),
+        );
         let mut leds = Leds::new(
             pinsa.pa10.into_push_pull_output(),
             pinsa.pa7.into_push_pull_output(),

examples/rtic/src/main.rs

@@ -5,7 +5,6 @@
 #[rtic::app(device = pac, dispatchers = [OC31, OC30, OC29])]
 mod app {
     use cortex_m::asm;
-    use embedded_hal::digital::StatefulOutputPin;
     use panic_rtt_target as _;
     use rtic_example::SYSCLK_FREQ;
     use rtic_monotonics::systick::prelude::*;
@@ -58,9 +57,9 @@ mod app {
     async fn blinky(cx: blinky::Context) {
         loop {
             rprintln!("toggling LEDs");
-            cx.local.led0.toggle().ok();
-            cx.local.led1.toggle().ok();
-            cx.local.led2.toggle().ok();
+            cx.local.led0.toggle();
+            cx.local.led1.toggle();
+            cx.local.led2.toggle();
             Mono::delay(1000.millis()).await;
         }
     }

examples/simple/Cargo.toml

@@ -16,8 +16,8 @@ embedded-io = "0.6"
 cortex-m-semihosting = "0.5.0"
 
 [dependencies.va108xx-hal]
-version = "0.9"
+version = "0.10"
 features = ["rt", "defmt"]
 
 [dependencies.vorago-reb1]
-version = "0.7"
+version = "0.8"

examples/simple/examples/blinky.rs

@@ -7,10 +7,7 @@
 #![no_std]
 
 use cortex_m_rt::entry;
-use embedded_hal::{
-    delay::DelayNs,
-    digital::{OutputPin, StatefulOutputPin},
-};
+use embedded_hal::delay::DelayNs;
 use panic_halt as _;
 use va108xx_hal::{
     gpio::PinsA,
@@ -38,21 +35,21 @@ fn main() -> ! {
     let mut led2 = porta.pa7.into_readable_push_pull_output();
     let mut led3 = porta.pa6.into_readable_push_pull_output();
     for _ in 0..10 {
-        led1.set_low().ok();
-        led2.set_low().ok();
-        led3.set_low().ok();
+        led1.set_low();
+        led2.set_low();
+        led3.set_low();
         delay_ms.delay_ms(200);
-        led1.set_high().ok();
-        led2.set_high().ok();
-        led3.set_high().ok();
+        led1.set_high();
+        led2.set_high();
+        led3.set_high();
         delay_tim1.delay_ms(200);
     }
     loop {
-        led1.toggle().ok();
+        led1.toggle();
         delay_ms.delay_ms(200);
-        led2.toggle().ok();
+        led2.toggle();
         delay_tim1.delay_ms(200);
-        led3.toggle().ok();
+        led3.toggle();
         delay_ms.delay_ms(200);
     }
 }

flashloader/Cargo.toml

@@ -29,9 +29,7 @@ rtic-monotonics = { version = "2", features = ["cortex-m-systick"] }
 rtic-sync = {version = "1", features = ["defmt-03"]}
 
 [dependencies.va108xx-hal]
-version = "0.9"
-# path = "../va108xx-hal"
+version = "0.10"
 
 [dependencies.vorago-reb1]
-version = "0.7"
-# path = "../vorago-reb1"
+version = "0.8"

flashloader/slot-a-blinky/Cargo.toml

@@ -11,7 +11,7 @@ panic-rtt-target = { version = "0.1.3" }
 rtt-target = { version = "0.5" }
 cortex-m = { version = "0.7", features = ["critical-section-single-core"] }
 embedded-hal = "1"
-va108xx-hal = { path = "../../va108xx-hal" }
+va108xx-hal = { version = "0.10.0" }
 
 [profile.dev]
 codegen-units = 1

flashloader/slot-b-blinky/Cargo.toml

@@ -11,7 +11,7 @@ panic-rtt-target = { version = "0.1.3" }
 rtt-target = { version = "0.5" }
 cortex-m = { version = "0.7", features = ["critical-section-single-core"] }
 embedded-hal = "1"
-va108xx-hal = { path = "../../va108xx-hal" }
+va108xx-hal = { version = "0.10.0" }
 
 [profile.dev]
 codegen-units = 1

va108xx-embassy/CHANGELOG.md

@@ -8,6 +8,12 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.2.0] 2025-02-17
+
+- Bumped va108xx-hal to v0.10.0
+- Remove `embassy` module, expose public functions in library root directly
+
+
 ## [v0.1.2] and [v0.1.1] 2025-02-13
 
 Docs patch

va108xx-embassy/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va108xx-embassy"
-version = "0.1.2"
+version = "0.2.0"
 edition = "2021"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 description = "Embassy-rs support for the Vorago VA108xx family of microcontrollers"
@@ -20,7 +20,7 @@ embassy-time-queue-utils = "0.1"
 
 once_cell = { version = "1", default-features = false, features = ["critical-section"] }
 
-va108xx-hal = "0.9"
+va108xx-hal = { version = "0.10" }
 
 [target.'cfg(all(target_arch = "arm", target_os = "none"))'.dependencies]
 portable-atomic = { version = "1", features = ["unsafe-assume-single-core"] }

va108xx-embassy/docs.sh

@@ -1,3 +1,3 @@
-#!/bin/sh
+#!/bin/bash
 export RUSTDOCFLAGS="--cfg docsrs --generate-link-to-definition -Z unstable-options"
 cargo +nightly doc --open

va108xx-embassy/src/lib.rs

@@ -1,17 +1,17 @@
 //! # Embassy-rs support for the Vorago VA108xx MCU family
 //!
-//! This repository contains the [embassy-rs](https://github.com/embassy-rs/embassy) support for the
-//! VA108xx family. Currently, it contains the time driver to allow using embassy-rs. It uses the TIM
-//! peripherals provided by the VA108xx family for this purpose.
+//! This repository contains the [embassy-rs](https://github.com/embassy-rs/embassy) support for
+//! the VA108xx family. Currently, it contains the time driver to allow using embassy-rs. It uses
+//! the TIM peripherals provided by the VA108xx family for this purpose.
 //!
 //! ## Usage
 //!
-//! This library only exposes the [embassy::init] method which sets up the time driver. This
-//! function must be called once at the start of the application.
+//! This library exposes the [init] or the [init_with_custom_irqs] functions which set up the time
+//! driver. This function must be called once at the start of the application.
 //!
 //! This implementation requires two TIM peripherals provided by the VA108xx device.
 //! The user can freely specify the two used TIM peripheral by passing the concrete TIM instances
-//! into the [embassy::init_with_custom_irqs] and [embassy::init] method.
+//! into the [init_with_custom_irqs] and [init] method.
 //!
 //! The application also requires two interrupt handlers to handle the timekeeper and alarm
 //! interrupts. By default, this library will define the interrupt handler inside the library
@@ -24,7 +24,7 @@
 //! You can disable the default features and then specify one of the features above to use the
 //! documented combination of IRQs. It is also possible to specify custom IRQs by importing and
 //! using the [embassy_time_driver_irqs] macro to declare the IRQ handlers in the
-//! application code. If this is done, [embassy::init_with_custom_irqs] must be used
+//! application code. If this is done, [init_with_custom_irqs] must be used
 //! method to pass the IRQ numbers to the library.
 //!
 //! ## Examples
@@ -33,8 +33,7 @@
 #![no_std]
 #![cfg_attr(docsrs, feature(doc_auto_cfg))]
 use core::cell::{Cell, RefCell};
-use critical_section::CriticalSection;
-use embassy_sync::blocking_mutex::CriticalSectionMutex as Mutex;
+use critical_section::{CriticalSection, Mutex};
 use portable_atomic::{AtomicU32, Ordering};
 
 use embassy_time_driver::{time_driver_impl, Driver, TICK_HZ};
@@ -46,7 +45,7 @@ use va108xx_hal::{
     clock::enable_peripheral_clock,
     enable_nvic_interrupt, pac,
     prelude::*,
-    timer::{enable_tim_clk, get_tim_raw, TimRegInterface},
+    timer::{enable_tim_clk, get_tim_raw, TimRegInterface, ValidTim},
     PeripheralSelect,
 };
 
@@ -77,7 +76,7 @@ macro_rules! embassy_time_driver_irqs {
         #[allow(non_snake_case)]
         fn $timekeeper_irq() {
             // Safety: We call it once here.
-            unsafe { $crate::embassy::time_driver().on_interrupt_timekeeping() }
+            unsafe { $crate::time_driver().on_interrupt_timekeeping() }
         }
 
         const ALARM_IRQ: pac::Interrupt = pac::Interrupt::$alarm_irq;
@@ -86,7 +85,7 @@ macro_rules! embassy_time_driver_irqs {
         #[allow(non_snake_case)]
         fn $alarm_irq() {
             // Safety: We call it once here.
-            unsafe { $crate::embassy::time_driver().on_interrupt_alarm() }
+            unsafe { $crate::time_driver().on_interrupt_alarm() }
         }
     };
 }
@@ -100,65 +99,58 @@ embassy_time_driver_irqs!(timekeeper_irq = OC30, alarm_irq = OC29);
 #[cfg(feature = "irq-oc28-oc29")]
 embassy_time_driver_irqs!(timekeeper_irq = OC29, alarm_irq = OC28);
 
-pub mod embassy {
-    use super::*;
-    use va108xx_hal::{pac, timer::TimRegInterface};
+/// Expose the time driver so the user can specify the IRQ handlers themselves.
+pub fn time_driver() -> &'static TimerDriver {
+    &TIME_DRIVER
+}
 
-    /// Expose the time driver so the user can specify the IRQ handlers themselves.
-    pub fn time_driver() -> &'static TimerDriver {
-        &TIME_DRIVER
-    }
+/// Initialization method for embassy.
+///
+/// This should be used if the interrupt handler is provided by the library, which is the
+/// default case.
+#[cfg(feature = "irqs-in-lib")]
+pub fn init<TimekeeperTim: TimRegInterface + ValidTim, AlarmTim: TimRegInterface + ValidTim>(
+    syscfg: &mut pac::Sysconfig,
+    irqsel: &pac::Irqsel,
+    sysclk: impl Into<Hertz>,
+    timekeeper_tim: TimekeeperTim,
+    alarm_tim: AlarmTim,
+) {
+    TIME_DRIVER.init(
+        syscfg,
+        irqsel,
+        sysclk,
+        timekeeper_tim,
+        alarm_tim,
+        TIMEKEEPER_IRQ,
+        ALARM_IRQ,
+    )
+}
 
-    /// Initialization method for embassy
-    ///
-    /// # Safety
-    ///
-    /// This has to be called once at initialization time to initiate the time driver for
-    /// embassy.
-    #[cfg(feature = "irqs-in-lib")]
-    pub unsafe fn init(
-        syscfg: &mut pac::Sysconfig,
-        irqsel: &pac::Irqsel,
-        sysclk: impl Into<Hertz>,
-        timekeeper_tim: impl TimRegInterface,
-        alarm_tim: impl TimRegInterface,
-    ) {
-        TIME_DRIVER.init(
-            syscfg,
-            irqsel,
-            sysclk,
-            timekeeper_tim,
-            alarm_tim,
-            TIMEKEEPER_IRQ,
-            ALARM_IRQ,
-        )
-    }
-
-    /// Initialization method for embassy
-    ///
-    /// # Safety
-    ///
-    /// This has to be called once at initialization time to initiate the time driver for
-    /// embassy.
-    pub unsafe fn init_with_custom_irqs(
-        syscfg: &mut pac::Sysconfig,
-        irqsel: &pac::Irqsel,
-        sysclk: impl Into<Hertz>,
-        timekeeper_tim: impl TimRegInterface,
-        alarm_tim: impl TimRegInterface,
-        timekeeper_irq: pac::Interrupt,
-        alarm_irq: pac::Interrupt,
-    ) {
-        TIME_DRIVER.init(
-            syscfg,
-            irqsel,
-            sysclk,
-            timekeeper_tim,
-            alarm_tim,
-            timekeeper_irq,
-            alarm_irq,
-        )
-    }
+/// Initialization method for embassy when using custom IRQ handlers.
+///
+/// Requires an explicit [pac::Interrupt] argument for the timekeeper and alarm IRQs.
+pub fn init_with_custom_irqs<
+    TimekeeperTim: TimRegInterface + ValidTim,
+    AlarmTim: TimRegInterface + ValidTim,
+>(
+    syscfg: &mut pac::Sysconfig,
+    irqsel: &pac::Irqsel,
+    sysclk: impl Into<Hertz>,
+    timekeeper_tim: TimekeeperTim,
+    alarm_tim: AlarmTim,
+    timekeeper_irq: pac::Interrupt,
+    alarm_irq: pac::Interrupt,
+) {
+    TIME_DRIVER.init(
+        syscfg,
+        irqsel,
+        sysclk,
+        timekeeper_tim,
+        alarm_tim,
+        timekeeper_irq,
+        alarm_irq,
+    )
 }
 
 struct AlarmState {
@@ -188,21 +180,21 @@ pub struct TimerDriver {
 
 impl TimerDriver {
     #[allow(clippy::too_many_arguments)]
-    fn init(
+    fn init<TimekeeperTim: TimRegInterface + ValidTim, AlarmTim: TimRegInterface + ValidTim>(
         &self,
         syscfg: &mut pac::Sysconfig,
         irqsel: &pac::Irqsel,
         sysclk: impl Into<Hertz>,
-        timekeeper_tim: impl TimRegInterface,
-        alarm_tim: impl TimRegInterface,
+        timekeeper_tim: TimekeeperTim,
+        alarm_tim: AlarmTim,
         timekeeper_irq: pac::Interrupt,
         alarm_irq: pac::Interrupt,
     ) {
-        if ALARM_TIM.get().is_some() {
+        if ALARM_TIM.get().is_some() || TIMEKEEPER_TIM.get().is_some() {
             return;
         }
-        ALARM_TIM.set(alarm_tim.tim_id()).ok();
-        TIMEKEEPER_TIM.set(timekeeper_tim.tim_id()).ok();
+        ALARM_TIM.set(AlarmTim::TIM_ID).ok();
+        TIMEKEEPER_TIM.set(TimekeeperTim::TIM_ID).ok();
         enable_peripheral_clock(syscfg, PeripheralSelect::Irqsel);
         enable_tim_clk(syscfg, timekeeper_tim.tim_id());
         let timekeeper_reg_block = timekeeper_tim.reg_block();

va108xx-hal/CHANGELOG.md

@@ -8,7 +8,27 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
-## [v0.9.0]
+## [v0.10.0] 2025-02-17
+
+## Added
+
+- A lot of missing `defmt::Format` implementations.
+
+## Changed
+
+- Larger refactoring of GPIO library. The edge and level interrupt configurator functions do not
+  enable interrupts anymore. Instead, there are explicit `enbable_interrupt` and
+  `disable_interrupt` methods
+- Renamed GPIO `DynGroup` to `Port`
+- Rename generic GPIO interrupt handler into `on_interrupt_for_asynch_gpio`
+  into `on_interrupt_for_async_gpio_for_port` which expects a Port argument
+
+## Fixed
+
+- Bug in async GPIO interrupt handler where all enabled interrupts, even the ones which might
+  be unrelated to the pin, were disabled.
+
+## [v0.9.0] 2025-02-13
 
 ## Fixed
 

va108xx-hal/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va108xx-hal"
-version = "0.9.0"
+version = "0.10.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "HAL for the Vorago VA108xx family of microcontrollers"
@@ -28,8 +28,8 @@ heapless = "0.8"
 static_cell = "2"
 thiserror = { version = "2", default-features = false }
 void = { version = "1", default-features = false }
-once_cell = {version = "1", default-features = false }
-va108xx = { version = "0.4", default-features = false, features = ["critical-section"] }
+once_cell = { version = "1", default-features = false }
+va108xx = { version = "0.5", default-features = false, features = ["critical-section", "defmt"] }
 embassy-sync = "0.6"
 
 defmt = { version = "0.3", optional = true }
@@ -42,7 +42,7 @@ portable-atomic = "1"
 [features]
 default = ["rt"]
 rt = ["va108xx/rt"]
-defmt = ["dep:defmt", "fugit/defmt"]
+defmt = ["dep:defmt", "fugit/defmt", "embedded-hal/defmt-03"]
 
 [package.metadata.docs.rs]
 all-features = true

va108xx-hal/src/gpio/asynch.rs

@@ -3,9 +3,9 @@
 //! This module provides the [InputPinAsync] and [InputDynPinAsync] which both implement
 //! the [embedded_hal_async::digital::Wait] trait. These types allow for asynchronous waiting
 //! on GPIO pins. Please note that this module does not specify/declare the interrupt handlers
-//! which must be provided for async support to work. However, it provides one generic
-//! [handler][on_interrupt_for_asynch_gpio] which should be called in ALL user interrupt handlers
-//! which handle GPIO interrupts.
+//! which must be provided for async support to work. However, it provides the
+//! [on_interrupt_for_async_gpio_for_port] generic interrupt handler. This should be called in all
+//! IRQ functions which handle any GPIO interrupts with the corresponding [Port] argument.
 //!
 //! # Example
 //!
@@ -13,68 +13,73 @@
 use core::future::Future;
 
 use embassy_sync::waitqueue::AtomicWaker;
-use embedded_hal::digital::InputPin;
 use embedded_hal_async::digital::Wait;
 use portable_atomic::AtomicBool;
-use va108xx::{self as pac, Irqsel, Sysconfig};
+use va108xx::{self as pac};
 
 use crate::InterruptConfig;
 
 use super::{
-    pin, DynGroup, DynPin, DynPinId, InputConfig, InterruptEdge, InvalidPinTypeError, Pin, PinId,
-    NUM_GPIO_PINS, NUM_PINS_PORT_A,
+    pin, DynPin, DynPinId, InputConfig, InterruptEdge, InvalidPinTypeError, Pin, PinId, Port,
+    NUM_PINS_PORT_A, NUM_PINS_PORT_B,
 };
 
-static WAKERS: [AtomicWaker; NUM_GPIO_PINS] = [const { AtomicWaker::new() }; NUM_GPIO_PINS];
-static EDGE_DETECTION: [AtomicBool; NUM_GPIO_PINS] =
-    [const { AtomicBool::new(false) }; NUM_GPIO_PINS];
+static WAKERS_FOR_PORT_A: [AtomicWaker; NUM_PINS_PORT_A] =
+    [const { AtomicWaker::new() }; NUM_PINS_PORT_A];
+static WAKERS_FOR_PORT_B: [AtomicWaker; NUM_PINS_PORT_B] =
+    [const { AtomicWaker::new() }; NUM_PINS_PORT_B];
+static EDGE_DETECTION_PORT_A: [AtomicBool; NUM_PINS_PORT_A] =
+    [const { AtomicBool::new(false) }; NUM_PINS_PORT_A];
+static EDGE_DETECTION_PORT_B: [AtomicBool; NUM_PINS_PORT_B] =
+    [const { AtomicBool::new(false) }; NUM_PINS_PORT_B];
 
-#[inline]
-fn pin_id_to_offset(dyn_pin_id: DynPinId) -> usize {
-    match dyn_pin_id.group {
-        DynGroup::A => dyn_pin_id.num as usize,
-        DynGroup::B => NUM_PINS_PORT_A + dyn_pin_id.num as usize,
-    }
-}
-
-/// Generic interrupt handler for GPIO interrupts to support the async functionalities.
+/// Generic interrupt handler for GPIO interrupts on a specific port to support async functionalities
 ///
-/// This handler will wake the correspoding wakers for the pins which triggered an interrupt
-/// as well as updating the static edge detection structures. This allows the pin future to
-/// complete async operations. The user should call this function in ALL interrupt handlers
-/// which handle any GPIO interrupts.
-#[inline]
-pub fn on_interrupt_for_asynch_gpio() {
+/// This function should be called in all interrupt handlers which handle any GPIO interrupts
+/// matching the [Port] argument.
+/// The handler will wake the corresponding wakers for the pins that triggered an interrupts
+/// as well as update the static edge detection structures. This allows the pin future tocomplete
+/// complete async operations.
+pub fn on_interrupt_for_async_gpio_for_port(port: Port) {
     let periphs = unsafe { pac::Peripherals::steal() };
 
-    handle_interrupt_for_gpio_and_port(
-        periphs.porta.irq_enb().read().bits(),
-        periphs.porta.edge_status().read().bits(),
-        0,
-    );
-    handle_interrupt_for_gpio_and_port(
-        periphs.portb.irq_enb().read().bits(),
-        periphs.portb.edge_status().read().bits(),
-        NUM_PINS_PORT_A,
-    );
+    let (irq_enb, edge_status, wakers, edge_detection) = match port {
+        Port::A => (
+            periphs.porta.irq_enb().read().bits(),
+            periphs.porta.edge_status().read().bits(),
+            WAKERS_FOR_PORT_A.as_ref(),
+            EDGE_DETECTION_PORT_A.as_ref(),
+        ),
+        Port::B => (
+            periphs.portb.irq_enb().read().bits(),
+            periphs.portb.edge_status().read().bits(),
+            WAKERS_FOR_PORT_B.as_ref(),
+            EDGE_DETECTION_PORT_B.as_ref(),
+        ),
+    };
+
+    on_interrupt_for_port(irq_enb, edge_status, wakers, edge_detection);
 }
 
-// Uses the enabled interrupt register and the persistent edge status to capture all GPIO events.
 #[inline]
-fn handle_interrupt_for_gpio_and_port(mut irq_enb: u32, edge_status: u32, pin_base_offset: usize) {
+fn on_interrupt_for_port(
+    mut irq_enb: u32,
+    edge_status: u32,
+    wakers: &'static [AtomicWaker],
+    edge_detection: &'static [AtomicBool],
+) {
     while irq_enb != 0 {
         let bit_pos = irq_enb.trailing_zeros() as usize;
         let bit_mask = 1 << bit_pos;
 
-        WAKERS[pin_base_offset + bit_pos].wake();
+        wakers[bit_pos].wake();
 
         if edge_status & bit_mask != 0 {
-            EDGE_DETECTION[pin_base_offset + bit_pos]
-                .store(true, core::sync::atomic::Ordering::Relaxed);
-        }
+            edge_detection[bit_pos].store(true, core::sync::atomic::Ordering::Relaxed);
 
-        // Clear the processed bit
-        irq_enb &= !bit_mask;
+            // Clear the processed bit
+            irq_enb &= !bit_mask;
+        }
     }
 }
 
@@ -85,93 +90,66 @@ fn handle_interrupt_for_gpio_and_port(mut irq_enb: u32, edge_status: u32, pin_ba
 /// struture is granted  to allow writing custom async structures.
 pub struct InputPinFuture {
     pin_id: DynPinId,
+    waker_group: &'static [AtomicWaker],
+    edge_detection_group: &'static [AtomicBool],
 }
 
 impl InputPinFuture {
-    /// # Safety
-    ///
-    /// This calls [Self::new_with_dyn_pin] but uses [pac::Peripherals::steal] to get the system configuration
-    /// and IRQ selection peripherals. Users must ensure that the registers and configuration
-    /// related to this input pin are not being used elsewhere concurrently.
-    pub unsafe fn new_unchecked_with_dyn_pin(
-        pin: &mut DynPin,
-        irq: pac::Interrupt,
-        edge: InterruptEdge,
-    ) -> Result<Self, InvalidPinTypeError> {
-        let mut periphs = pac::Peripherals::steal();
-        Self::new_with_dyn_pin(pin, irq, edge, &mut periphs.sysconfig, &mut periphs.irqsel)
+    #[inline]
+    pub fn pin_group_to_waker_and_edge_detection_group(
+        group: Port,
+    ) -> (&'static [AtomicWaker], &'static [AtomicBool]) {
+        match group {
+            Port::A => (WAKERS_FOR_PORT_A.as_ref(), EDGE_DETECTION_PORT_A.as_ref()),
+            Port::B => (WAKERS_FOR_PORT_B.as_ref(), EDGE_DETECTION_PORT_B.as_ref()),
+        }
     }
 
     pub fn new_with_dyn_pin(
         pin: &mut DynPin,
         irq: pac::Interrupt,
         edge: InterruptEdge,
-        sys_cfg: &mut Sysconfig,
-        irq_sel: &mut Irqsel,
     ) -> Result<Self, InvalidPinTypeError> {
         if !pin.is_input_pin() {
             return Err(InvalidPinTypeError(pin.mode()));
         }
 
-        EDGE_DETECTION[pin_id_to_offset(pin.id())]
+        let (waker_group, edge_detection_group) =
+            Self::pin_group_to_waker_and_edge_detection_group(pin.id().port());
+        edge_detection_group[pin.id().num() as usize]
             .store(false, core::sync::atomic::Ordering::Relaxed);
-        pin.interrupt_edge(
-            edge,
-            InterruptConfig::new(irq, true, true),
-            Some(sys_cfg),
-            Some(irq_sel),
-        )
-        .unwrap();
-        Ok(Self { pin_id: pin.id() })
-    }
-
-    /// # Safety
-    ///
-    /// This calls [Self::new_with_pin] but uses [pac::Peripherals::steal] to get the system configuration
-    /// and IRQ selection peripherals. Users must ensure that the registers and configuration
-    /// related to this input pin are not being used elsewhere concurrently.
-    pub unsafe fn new_unchecked_with_pin<I: PinId, C: InputConfig>(
-        pin: &mut Pin<I, pin::Input<C>>,
-        irq: pac::Interrupt,
-        edge: InterruptEdge,
-    ) -> Self {
-        let mut periphs = pac::Peripherals::steal();
-        Self::new_with_pin(pin, irq, edge, &mut periphs.sysconfig, &mut periphs.irqsel)
+        pin.configure_edge_interrupt(edge).unwrap();
+        pin.enable_interrupt(InterruptConfig::new(irq, true, true));
+        Ok(Self {
+            pin_id: pin.id(),
+            waker_group,
+            edge_detection_group,
+        })
     }
 
     pub fn new_with_pin<I: PinId, C: InputConfig>(
         pin: &mut Pin<I, pin::Input<C>>,
         irq: pac::Interrupt,
         edge: InterruptEdge,
-        sys_cfg: &mut Sysconfig,
-        irq_sel: &mut Irqsel,
     ) -> Self {
-        EDGE_DETECTION[pin_id_to_offset(pin.id())]
+        let (waker_group, edge_detection_group) =
+            Self::pin_group_to_waker_and_edge_detection_group(pin.id().port());
+        edge_detection_group[pin.id().num() as usize]
             .store(false, core::sync::atomic::Ordering::Relaxed);
-        pin.configure_edge_interrupt(
-            edge,
-            InterruptConfig::new(irq, true, true),
-            Some(sys_cfg),
-            Some(irq_sel),
-        );
-        Self { pin_id: pin.id() }
+        pin.configure_edge_interrupt(edge);
+        pin.enable_interrupt(InterruptConfig::new(irq, true, true));
+        Self {
+            pin_id: pin.id(),
+            edge_detection_group,
+            waker_group,
+        }
     }
 }
 
 impl Drop for InputPinFuture {
     fn drop(&mut self) {
-        let periphs = unsafe { pac::Peripherals::steal() };
-        if self.pin_id.group == DynGroup::A {
-            periphs
-                .porta
-                .irq_enb()
-                .modify(|r, w| unsafe { w.bits(r.bits() & !(1 << self.pin_id.num)) });
-        } else {
-            periphs
-                .porta
-                .irq_enb()
-                .modify(|r, w| unsafe { w.bits(r.bits() & !(1 << self.pin_id.num)) });
-        }
+        // The API ensures that we actually own the pin, so stealing it here is okay.
+        unsafe { DynPin::steal(self.pin_id) }.disable_interrupt(false);
     }
 }
 
@@ -181,9 +159,9 @@ impl Future for InputPinFuture {
         self: core::pin::Pin<&mut Self>,
         cx: &mut core::task::Context<'_>,
     ) -> core::task::Poll<Self::Output> {
-        let idx = pin_id_to_offset(self.pin_id);
-        WAKERS[idx].register(cx.waker());
-        if EDGE_DETECTION[idx].swap(false, core::sync::atomic::Ordering::Relaxed) {
+        let idx = self.pin_id.num() as usize;
+        self.waker_group[idx].register(cx.waker());
+        if self.edge_detection_group[idx].swap(false, core::sync::atomic::Ordering::Relaxed) {
             return core::task::Poll::Ready(());
         }
         core::task::Poll::Pending
@@ -200,8 +178,8 @@ impl InputDynPinAsync {
     /// passed as well and is used to route and enable the interrupt.
     ///
     /// Please note that the interrupt handler itself must be provided by the user and the
-    /// generic [on_interrupt_for_asynch_gpio] function must be called inside that function for
-    /// the asynchronous functionality to work.
+    /// generic [on_interrupt_for_async_gpio_for_port] function must be called inside that function
+    /// for the asynchronous functionality to work.
     pub fn new(pin: DynPin, irq: pac::Interrupt) -> Result<Self, InvalidPinTypeError> {
         if !pin.is_input_pin() {
             return Err(InvalidPinTypeError(pin.mode()));
@@ -213,15 +191,10 @@ impl InputDynPinAsync {
     ///
     /// This returns immediately if the pin is already high.
     pub async fn wait_for_high(&mut self) {
-        let fut = unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_dyn_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::LowToHigh,
-            )
-            .unwrap()
-        };
+        // Unwrap okay, checked pin in constructor.
+        let fut =
+            InputPinFuture::new_with_dyn_pin(&mut self.pin, self.irq, InterruptEdge::LowToHigh)
+                .unwrap();
         if self.pin.is_high().unwrap() {
             return;
         }
@@ -232,15 +205,10 @@ impl InputDynPinAsync {
     ///
     /// This returns immediately if the pin is already high.
     pub async fn wait_for_low(&mut self) {
-        let fut = unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_dyn_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::HighToLow,
-            )
-            .unwrap()
-        };
+        // Unwrap okay, checked pin in constructor.
+        let fut =
+            InputPinFuture::new_with_dyn_pin(&mut self.pin, self.irq, InterruptEdge::HighToLow)
+                .unwrap();
         if self.pin.is_low().unwrap() {
             return;
         }
@@ -249,44 +217,26 @@ impl InputDynPinAsync {
 
     /// Asynchronously wait until the pin sees a falling edge.
     pub async fn wait_for_falling_edge(&mut self) {
-        unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_dyn_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::HighToLow,
-            )
+        // Unwrap okay, checked pin in constructor.
+        InputPinFuture::new_with_dyn_pin(&mut self.pin, self.irq, InterruptEdge::HighToLow)
             .unwrap()
-        }
-        .await;
+            .await;
     }
 
     /// Asynchronously wait until the pin sees a rising edge.
     pub async fn wait_for_rising_edge(&mut self) {
-        unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_dyn_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::LowToHigh,
-            )
+        // Unwrap okay, checked pin in constructor.
+        InputPinFuture::new_with_dyn_pin(&mut self.pin, self.irq, InterruptEdge::LowToHigh)
             .unwrap()
-        }
-        .await;
+            .await;
     }
 
     /// Asynchronously wait until the pin sees any edge (either rising or falling).
     pub async fn wait_for_any_edge(&mut self) {
-        unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_dyn_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::BothEdges,
-            )
+        // Unwrap okay, checked pin in constructor.
+        InputPinFuture::new_with_dyn_pin(&mut self.pin, self.irq, InterruptEdge::BothEdges)
             .unwrap()
-        }
-        .await;
+            .await;
     }
 
     pub fn release(self) -> DynPin {
@@ -335,8 +285,8 @@ impl<I: PinId, C: InputConfig> InputPinAsync<I, C> {
     /// passed as well and is used to route and enable the interrupt.
     ///
     /// Please note that the interrupt handler itself must be provided by the user and the
-    /// generic [on_interrupt_for_asynch_gpio] function must be called inside that function for
-    /// the asynchronous functionality to work.
+    /// generic [on_interrupt_for_async_gpio_for_port] function must be called inside that function
+    /// for the asynchronous functionality to work.
     pub fn new(pin: Pin<I, pin::Input<C>>, irq: pac::Interrupt) -> Self {
         Self { pin, irq }
     }
@@ -345,14 +295,8 @@ impl<I: PinId, C: InputConfig> InputPinAsync<I, C> {
     ///
     /// This returns immediately if the pin is already high.
     pub async fn wait_for_high(&mut self) {
-        let fut = unsafe {
-            InputPinFuture::new_unchecked_with_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::LowToHigh,
-            )
-        };
-        if self.pin.is_high().unwrap() {
+        let fut = InputPinFuture::new_with_pin(&mut self.pin, self.irq, InterruptEdge::LowToHigh);
+        if self.pin.is_high() {
             return;
         }
         fut.await;
@@ -362,14 +306,8 @@ impl<I: PinId, C: InputConfig> InputPinAsync<I, C> {
     ///
     /// This returns immediately if the pin is already high.
     pub async fn wait_for_low(&mut self) {
-        let fut = unsafe {
-            InputPinFuture::new_unchecked_with_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::HighToLow,
-            )
-        };
-        if self.pin.is_low().unwrap() {
+        let fut = InputPinFuture::new_with_pin(&mut self.pin, self.irq, InterruptEdge::HighToLow);
+        if self.pin.is_low() {
             return;
         }
         fut.await;
@@ -377,40 +315,19 @@ impl<I: PinId, C: InputConfig> InputPinAsync<I, C> {
 
     /// Asynchronously wait until the pin sees falling edge.
     pub async fn wait_for_falling_edge(&mut self) {
-        unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::HighToLow,
-            )
-        }
-        .await;
+        // Unwrap okay, checked pin in constructor.
+        InputPinFuture::new_with_pin(&mut self.pin, self.irq, InterruptEdge::HighToLow).await;
     }
 
     /// Asynchronously wait until the pin sees rising edge.
     pub async fn wait_for_rising_edge(&mut self) {
-        unsafe {
-            // Unwrap okay, checked pin in constructor.
-            InputPinFuture::new_unchecked_with_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::LowToHigh,
-            )
-        }
-        .await;
+        // Unwrap okay, checked pin in constructor.
+        InputPinFuture::new_with_pin(&mut self.pin, self.irq, InterruptEdge::LowToHigh).await;
     }
 
     /// Asynchronously wait until the pin sees any edge (either rising or falling).
     pub async fn wait_for_any_edge(&mut self) {
-        unsafe {
-            InputPinFuture::new_unchecked_with_pin(
-                &mut self.pin,
-                self.irq,
-                InterruptEdge::BothEdges,
-            )
-        }
-        .await;
+        InputPinFuture::new_with_pin(&mut self.pin, self.irq, InterruptEdge::BothEdges).await;
     }
 
     pub fn release(self) -> Pin<I, pin::Input<C>> {

va108xx-hal/src/gpio/dynpin.rs

@@ -57,11 +57,10 @@
 //! [InvalidPinTypeError].
 
 use super::{
-    pin::{FilterType, InterruptEdge, InterruptLevel, Pin, PinId, PinMode, PinState},
-    reg::RegisterInterface,
-    InputDynPinAsync,
+    pin::{FilterType, Pin, PinId, PinMode},
+    InputDynPinAsync, InterruptEdge, InterruptLevel, IsMaskedError, PinState, Port,
 };
-use crate::{clock::FilterClkSel, enable_nvic_interrupt, pac, FunSel, InterruptConfig};
+use crate::{clock::FilterClkSel, enable_nvic_interrupt, pac, FunSel};
 
 //==================================================================================================
 //  DynPinMode configurations
@@ -156,55 +155,92 @@ pub const DYN_ALT_FUNC_3: DynPinMode = DynPinMode::Alternate(DynAlternate::Sel3)
 //  DynGroup & DynPinId
 //==================================================================================================
 
-/// Value-level `enum` for pin groups
-#[derive(Debug, PartialEq, Eq, Clone, Copy)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub enum DynGroup {
-    A,
-    B,
-}
+pub type DynGroup = Port;
 
-/// Value-level `struct` representing pin IDs
 #[derive(Debug, PartialEq, Eq, Clone, Copy)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct DynPinId {
-    pub group: DynGroup,
-    pub num: u8,
+    port: Port,
+    num: u8,
 }
 
-//==================================================================================================
-//  DynRegisters
-//==================================================================================================
+impl DynPinId {
+    pub const fn new(port: Port, num: u8) -> Self {
+        DynPinId { port, num }
+    }
 
-/// Provide a safe register interface for [`DynPin`]s
-///
-/// This `struct` takes ownership of a [`DynPinId`] and provides an API to
-/// access the corresponding regsiters.
-#[derive(Debug)]
-pub(crate) struct DynRegisters(DynPinId);
-
-// [`DynRegisters`] takes ownership of the [`DynPinId`], and [`DynPin`]
-// guarantees that each pin is a singleton, so this implementation is safe.
-unsafe impl RegisterInterface for DynRegisters {
-    #[inline]
-    fn id(&self) -> DynPinId {
-        self.0
+    pub const fn port(&self) -> Port {
+        self.port
+    }
+    pub const fn num(&self) -> u8 {
+        self.num
     }
 }
 
-impl DynRegisters {
-    /// Create a new instance of [`DynRegisters`]
-    ///
-    /// # Safety
-    ///
-    /// Users must never create two simultaneous instances of this `struct` with
-    /// the same [`DynPinId`]
+//==================================================================================================
+//  ModeFields
+//==================================================================================================
+
+/// Collect all fields needed to set the [`PinMode`](super::PinMode)
+#[derive(Default)]
+struct ModeFields {
+    dir: bool,
+    opendrn: bool,
+    pull_en: bool,
+    /// true for pullup, false for pulldown
+    pull_dir: bool,
+    funsel: u8,
+    enb_input: bool,
+}
+
+impl From<DynPinMode> for ModeFields {
     #[inline]
-    unsafe fn new(id: DynPinId) -> Self {
-        DynRegisters(id)
+    fn from(mode: DynPinMode) -> Self {
+        let mut fields = Self::default();
+        match mode {
+            DynPinMode::Input(config) => {
+                fields.dir = false;
+                fields.funsel = FunSel::Sel0 as u8;
+                match config {
+                    DynInput::Floating => (),
+                    DynInput::PullUp => {
+                        fields.pull_en = true;
+                        fields.pull_dir = true;
+                    }
+                    DynInput::PullDown => {
+                        fields.pull_en = true;
+                    }
+                }
+            }
+            DynPinMode::Output(config) => {
+                fields.dir = true;
+                fields.funsel = FunSel::Sel0 as u8;
+                match config {
+                    DynOutput::PushPull => (),
+                    DynOutput::OpenDrain => {
+                        fields.opendrn = true;
+                    }
+                    DynOutput::ReadableOpenDrain => {
+                        fields.enb_input = true;
+                        fields.opendrn = true;
+                    }
+                    DynOutput::ReadablePushPull => {
+                        fields.enb_input = true;
+                    }
+                }
+            }
+            DynPinMode::Alternate(config) => {
+                fields.funsel = config as u8;
+            }
+        }
+        fields
     }
 }
 
+/// Type definition to avoid confusion: These register blocks are identical
+type PortRegisterBlock = pac::porta::RegisterBlock;
+pub type PortReg = pac::ioconfig::Porta;
+
 //==================================================================================================
 //  DynPin
 //==================================================================================================
@@ -215,46 +251,59 @@ impl DynRegisters {
 /// by the same type, and pins are tracked and distinguished at run-time.
 #[derive(Debug)]
 pub struct DynPin {
-    pub(crate) regs: DynRegisters,
+    id: DynPinId,
     mode: DynPinMode,
 }
 
 impl DynPin {
-    /// Create a new [`DynPin`]
+    /// Create a new [DynPin]
     ///
     /// # Safety
     ///
-    /// Each [`DynPin`] must be a singleton. For a given [`DynPinId`], there
+    /// Each [DynPin] must be a singleton. For a given [DynPinId], there
     /// must be at most one corresponding [`DynPin`] in existence at any given
     /// time.  Violating this requirement is `unsafe`.
     #[inline]
-    pub(crate) unsafe fn new(id: DynPinId, mode: DynPinMode) -> Self {
+    pub(crate) const unsafe fn new(id: DynPinId, mode: DynPinMode) -> Self {
+        DynPin { id, mode }
+    }
+
+    /// Steals a new [DynPin].
+    ///
+    /// This function will simply set the internal mode to [DYN_FLOATING_INPUT] pin without
+    /// modifying any registers related to the behaviour of the pin. The user should call
+    /// [Self::into_mode] to ensure the correct mode of the pin.
+    ///
+    /// # Safety
+    ///
+    /// Circumvents the HAL's safety guarantees. The caller must ensure that the pin is not
+    /// used cocurrently somewhere else. The caller might also want to call [Self::into_mode]
+    /// to ensure the correct desired state of the pin. It is recommended to create the pin using
+    /// [Pin::downgrade] instead.
+    pub const unsafe fn steal(id: DynPinId) -> Self {
         DynPin {
-            regs: DynRegisters::new(id),
-            mode,
+            id,
+            mode: DYN_FLOATING_INPUT,
         }
     }
 
     /// Return a copy of the pin ID
     #[inline]
-    pub fn id(&self) -> DynPinId {
-        self.regs.0
+    pub const fn id(&self) -> DynPinId {
+        self.id
     }
 
     /// Return a copy of the pin mode
     #[inline]
-    pub fn mode(&self) -> DynPinMode {
+    pub const fn mode(&self) -> DynPinMode {
         self.mode
     }
 
     /// Convert the pin to the requested [`DynPinMode`]
     #[inline]
     pub fn into_mode(&mut self, mode: DynPinMode) {
-        // Only modify registers if we are actually changing pin mode
-        if mode != self.mode {
-            self.regs.change_mode(mode);
-            self.mode = mode;
-        }
+        self.change_mode(mode);
+        self.mode = mode;
     }
 
     #[inline]
@@ -262,6 +311,11 @@ impl DynPin {
         matches!(self.mode, DynPinMode::Input(_))
     }
 
+    #[inline]
+    pub fn is_output_pin(&self) -> bool {
+        matches!(self.mode, DynPinMode::Output(_))
+    }
+
     #[inline]
     pub fn into_funsel_1(&mut self) {
         self.into_mode(DYN_ALT_FUNC_1);
@@ -319,205 +373,60 @@ impl DynPin {
         self.into_mode(DYN_RD_OPEN_DRAIN_OUTPUT);
     }
 
-    #[inline]
-    pub fn datamask(&self) -> bool {
-        self.regs.datamask()
+    #[inline(always)]
+    pub fn is_low(&self) -> Result<bool, InvalidPinTypeError> {
+        self.read_internal().map(|v| !v)
     }
 
-    #[inline]
-    pub fn clear_datamask(&mut self) {
-        self.regs.clear_datamask();
+    #[inline(always)]
+    pub fn is_high(&self) -> Result<bool, InvalidPinTypeError> {
+        self.read_internal()
     }
 
-    #[inline]
-    pub fn set_datamask(&mut self) {
-        self.regs.set_datamask();
+    #[inline(always)]
+    pub fn set_low(&mut self) -> Result<(), InvalidPinTypeError> {
+        self.write_internal(false)
     }
 
-    #[inline]
-    pub fn is_high_masked(&self) -> Result<bool, crate::gpio::IsMaskedError> {
-        self.regs.read_pin_masked()
+    #[inline(always)]
+    pub fn set_high(&mut self) -> Result<(), InvalidPinTypeError> {
+        self.write_internal(true)
     }
 
-    #[inline]
-    pub fn is_low_masked(&self) -> Result<bool, crate::gpio::IsMaskedError> {
-        self.regs.read_pin_masked().map(|v| !v)
-    }
-
-    #[inline]
-    pub fn set_high_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
-        self.regs.write_pin_masked(true)
-    }
-
-    #[inline]
-    pub fn set_low_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
-        self.regs.write_pin_masked(false)
-    }
-
-    pub(crate) fn irq_enb(
-        &mut self,
-        irq_cfg: crate::InterruptConfig,
-        syscfg: Option<&mut va108xx::Sysconfig>,
-        irqsel: Option<&mut va108xx::Irqsel>,
-    ) {
-        if let Some(syscfg) = syscfg {
-            crate::clock::enable_peripheral_clock(syscfg, crate::clock::PeripheralClocks::Irqsel);
+    /// Toggle the logic level of an output pin
+    #[inline(always)]
+    pub fn toggle(&mut self) -> Result<(), InvalidPinTypeError> {
+        if !self.is_output_pin() {
+            return Err(InvalidPinTypeError(self.mode));
         }
-        self.regs.enable_irq();
-        if let Some(irqsel) = irqsel {
-            if irq_cfg.route {
-                match self.regs.id().group {
-                    // Set the correct interrupt number in the IRQSEL register
-                    DynGroup::A => {
-                        irqsel
-                            .porta0(self.regs.id().num as usize)
-                            .write(|w| unsafe { w.bits(irq_cfg.id as u32) });
-                    }
-                    DynGroup::B => {
-                        irqsel
-                            .portb0(self.regs.id().num as usize)
-                            .write(|w| unsafe { w.bits(irq_cfg.id as u32) });
-                    }
-                }
-            }
+        // Safety: TOGOUT is a "mask" register, and we only write the bit for
+        // this pin ID
+        unsafe { self.port_reg().togout().write(|w| w.bits(self.mask_32())) };
+        Ok(())
+    }
+
+    pub fn enable_interrupt(&mut self, irq_cfg: crate::InterruptConfig) {
+        if irq_cfg.route {
+            self.configure_irqsel(irq_cfg.id);
         }
         if irq_cfg.enable_in_nvic {
             unsafe { enable_nvic_interrupt(irq_cfg.id) };
         }
+
+        // We only manipulate our own bit.
+        self.port_reg()
+            .irq_enb()
+            .modify(|r, w| unsafe { w.bits(r.bits() | self.mask_32()) });
     }
 
-    /// See p.53 of the programmers guide for more information.
-    /// Possible delays in clock cycles:
-    ///  - Delay 1: 1
-    ///  - Delay 2: 2
-    ///  - Delay 1 + Delay 2: 3
-    #[inline]
-    pub fn delay(self, delay_1: bool, delay_2: bool) -> Result<Self, InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Output(_) => {
-                self.regs.delay(delay_1, delay_2);
-                Ok(self)
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
+    pub fn disable_interrupt(&mut self, reset_irqsel: bool) {
+        if reset_irqsel {
+            self.reset_irqsel();
         }
-    }
-
-    /// See p.52 of the programmers guide for more information.
-    /// When configured for pulse mode, a given pin will set the non-default state for exactly
-    /// one clock cycle before returning to the configured default state
-    #[inline]
-    pub fn pulse_mode(
-        &mut self,
-        enable: bool,
-        default_state: PinState,
-    ) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Output(_) => {
-                self.regs.pulse_mode(enable, default_state);
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    /// See p.37 and p.38 of the programmers guide for more information.
-    #[inline]
-    pub fn filter_type(
-        &mut self,
-        filter: FilterType,
-        clksel: FilterClkSel,
-    ) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Input(_) => {
-                self.regs.filter_type(filter, clksel);
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    #[inline]
-    pub fn interrupt_edge(
-        &mut self,
-        edge_type: InterruptEdge,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut pac::Sysconfig>,
-        irqsel: Option<&mut pac::Irqsel>,
-    ) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Input(_) | DynPinMode::Output(_) => {
-                self.regs.interrupt_edge(edge_type);
-                self.irq_enb(irq_cfg, syscfg, irqsel);
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    #[inline]
-    pub fn interrupt_level(
-        &mut self,
-        level_type: InterruptLevel,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut pac::Sysconfig>,
-        irqsel: Option<&mut pac::Irqsel>,
-    ) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Input(_) | DynPinMode::Output(_) => {
-                self.regs.interrupt_level(level_type);
-                self.irq_enb(irq_cfg, syscfg, irqsel);
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    #[inline]
-    pub fn toggle_with_toggle_reg(&mut self) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Output(_) => {
-                self.regs.toggle();
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    #[inline]
-    fn _read(&self) -> Result<bool, InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Input(_) | DYN_RD_OPEN_DRAIN_OUTPUT | DYN_RD_PUSH_PULL_OUTPUT => {
-                Ok(self.regs.read_pin())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-    #[inline]
-    fn _write(&mut self, bit: bool) -> Result<(), InvalidPinTypeError> {
-        match self.mode {
-            DynPinMode::Output(_) => {
-                self.regs.write_pin(bit);
-                Ok(())
-            }
-            _ => Err(InvalidPinTypeError(self.mode)),
-        }
-    }
-
-    #[inline]
-    fn _is_low(&self) -> Result<bool, InvalidPinTypeError> {
-        self._read().map(|v| !v)
-    }
-    #[inline]
-    fn _is_high(&self) -> Result<bool, InvalidPinTypeError> {
-        self._read()
-    }
-    #[inline]
-    fn _set_low(&mut self) -> Result<(), InvalidPinTypeError> {
-        self._write(false)
-    }
-    #[inline]
-    fn _set_high(&mut self) -> Result<(), InvalidPinTypeError> {
-        self._write(true)
+        // We only manipulate our own bit.
+        self.port_reg()
+            .irq_enb()
+            .modify(|r, w| unsafe { w.bits(r.bits() & !self.mask_32()) });
     }
 
     /// Try to recreate a type-level [`Pin`] from a value-level [`DynPin`]
@@ -527,7 +436,7 @@ impl DynPin {
     /// or refuse to perform it.
     #[inline]
     pub fn upgrade<I: PinId, M: PinMode>(self) -> Result<Pin<I, M>, InvalidPinTypeError> {
-        if self.regs.0 == I::DYN && self.mode == M::DYN {
+        if self.id == I::DYN && self.mode == M::DYN {
             // The `DynPin` is consumed, so it is safe to replace it with the
             // corresponding `Pin`
             return Ok(unsafe { Pin::new() });
@@ -543,6 +452,424 @@ impl DynPin {
     ) -> Result<InputDynPinAsync, InvalidPinTypeError> {
         InputDynPinAsync::new(self, irq)
     }
+
+    /// Configure the IRQSEL peripheral for this particular pin with the given interrupt ID.
+    pub fn configure_irqsel(&mut self, id: pac::Interrupt) {
+        let mut syscfg = unsafe { pac::Sysconfig::steal() };
+        let irqsel = unsafe { pac::Irqsel::steal() };
+        crate::clock::enable_peripheral_clock(&mut syscfg, crate::clock::PeripheralClocks::Irqsel);
+        match self.id().port() {
+            // Set the correct interrupt number in the IRQSEL register
+            super::Port::A => {
+                irqsel
+                    .porta0(self.id().num() as usize)
+                    .write(|w| unsafe { w.bits(id as u32) });
+            }
+            super::Port::B => {
+                irqsel
+                    .portb0(self.id().num as usize)
+                    .write(|w| unsafe { w.bits(id as u32) });
+            }
+        }
+    }
+
+    /// Reset the IRQSEL peripheral value for this particular pin.
+    pub fn reset_irqsel(&mut self) {
+        let mut syscfg = unsafe { pac::Sysconfig::steal() };
+        let irqsel = unsafe { pac::Irqsel::steal() };
+        crate::clock::enable_peripheral_clock(&mut syscfg, crate::clock::PeripheralClocks::Irqsel);
+        match self.id().port() {
+            // Set the correct interrupt number in the IRQSEL register
+            super::Port::A => {
+                irqsel
+                    .porta0(self.id().num() as usize)
+                    .write(|w| unsafe { w.bits(u32::MAX) });
+            }
+            super::Port::B => {
+                irqsel
+                    .portb0(self.id().num as usize)
+                    .write(|w| unsafe { w.bits(u32::MAX) });
+            }
+        }
+    }
+
+    // Get DATAMASK bit for this particular pin
+    #[inline(always)]
+    pub fn datamask(&self) -> bool {
+        (self.port_reg().datamask().read().bits() >> self.id().num) == 1
+    }
+
+    /// Clear DATAMASK bit for this particular pin. This prevents access
+    /// of the corresponding bit for output and input operations
+    #[inline(always)]
+    pub fn clear_datamask(&self) {
+        self.port_reg()
+            .datamask()
+            .modify(|r, w| unsafe { w.bits(r.bits() & !self.mask_32()) });
+    }
+
+    /// Set DATAMASK bit for this particular pin. 1 is the default
+    /// state of the bit and allows access of the corresponding bit
+    #[inline(always)]
+    pub fn set_datamask(&self) {
+        self.port_reg()
+            .datamask()
+            .modify(|r, w| unsafe { w.bits(r.bits() | self.mask_32()) });
+    }
+
+    #[inline]
+    pub fn is_high_masked(&self) -> Result<bool, crate::gpio::IsMaskedError> {
+        self.read_pin_masked()
+    }
+
+    #[inline]
+    pub fn is_low_masked(&self) -> Result<bool, crate::gpio::IsMaskedError> {
+        self.read_pin_masked().map(|v| !v)
+    }
+
+    #[inline]
+    pub fn set_high_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
+        self.write_pin_masked(true)
+    }
+
+    #[inline]
+    pub fn set_low_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
+        self.write_pin_masked(false)
+    }
+
+    /// Possible delays in clock cycles:
+    ///  - Delay 1: 1
+    ///  - Delay 2: 2
+    ///  - Delay 1 + Delay 2: 3
+    #[inline]
+    pub fn configure_delay(
+        &mut self,
+        delay_1: bool,
+        delay_2: bool,
+    ) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Output(_) => {
+                self.configure_delay_internal(delay_1, delay_2);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    /// When configured for pulse mode, a given pin will set the non-default state for exactly
+    /// one clock cycle before returning to the configured default state
+    #[inline]
+    pub fn configure_pulse_mode(
+        &mut self,
+        enable: bool,
+        default_state: PinState,
+    ) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Output(_) => {
+                self.configure_pulse_mode_internal(enable, default_state);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    /// See p.37 and p.38 of the programmers guide for more information.
+    #[inline]
+    pub fn configure_filter_type(
+        &mut self,
+        filter: FilterType,
+        clksel: FilterClkSel,
+    ) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Input(_) => {
+                self.configure_filter_type_internal(filter, clksel);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    pub fn configure_edge_interrupt(
+        &mut self,
+        edge_type: InterruptEdge,
+    ) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Input(_) | DynPinMode::Output(_) => {
+                self.configure_edge_interrupt_internal(edge_type);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    pub fn configure_level_interrupt(
+        &mut self,
+        level_type: InterruptLevel,
+    ) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Input(_) | DynPinMode::Output(_) => {
+                self.configure_level_interrupt_internal(level_type);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    /// Change the pin mode
+    #[inline]
+    pub(crate) fn change_mode(&mut self, mode: DynPinMode) {
+        let ModeFields {
+            dir,
+            funsel,
+            opendrn,
+            pull_dir,
+            pull_en,
+            enb_input,
+        } = mode.into();
+        let (portreg, iocfg) = (self.port_reg(), self.iocfg_port());
+        iocfg.write(|w| {
+            w.opendrn().bit(opendrn);
+            w.pen().bit(pull_en);
+            w.plevel().bit(pull_dir);
+            w.iewo().bit(enb_input);
+            unsafe { w.funsel().bits(funsel) }
+        });
+        let mask = self.mask_32();
+        unsafe {
+            if dir {
+                portreg.dir().modify(|r, w| w.bits(r.bits() | mask));
+                // Clear output
+                portreg.clrout().write(|w| w.bits(mask));
+            } else {
+                portreg.dir().modify(|r, w| w.bits(r.bits() & !mask));
+            }
+        }
+    }
+
+    #[inline]
+    const fn port_reg(&self) -> &PortRegisterBlock {
+        match self.id().port() {
+            Port::A => unsafe { &(*pac::Porta::ptr()) },
+            Port::B => unsafe { &(*pac::Portb::ptr()) },
+        }
+    }
+
+    #[inline]
+    const fn iocfg_port(&self) -> &PortReg {
+        let ioconfig = unsafe { va108xx::Ioconfig::ptr().as_ref().unwrap() };
+        match self.id().port() {
+            Port::A => ioconfig.porta(self.id().num() as usize),
+            Port::B => ioconfig.portb0(self.id().num() as usize),
+        }
+    }
+
+    #[inline(always)]
+    fn read_internal(&self) -> Result<bool, InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Input(_) | DYN_RD_OPEN_DRAIN_OUTPUT | DYN_RD_PUSH_PULL_OUTPUT => {
+                Ok(self.read_pin())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    #[inline(always)]
+    fn write_internal(&mut self, bit: bool) -> Result<(), InvalidPinTypeError> {
+        match self.mode {
+            DynPinMode::Output(_) => {
+                self.write_pin(bit);
+                Ok(())
+            }
+            _ => Err(InvalidPinTypeError(self.mode)),
+        }
+    }
+
+    #[inline]
+    /// Read the logic level of an output pin
+    pub(crate) fn read_pin(&self) -> bool {
+        let portreg = self.port_reg();
+        ((portreg.datainraw().read().bits() >> self.id().num) & 0x01) == 1
+    }
+
+    /// Read a pin but use the masked version but check whether the datamask for the pin is
+    /// cleared as well
+    #[inline(always)]
+    fn read_pin_masked(&self) -> Result<bool, IsMaskedError> {
+        if !self.datamask() {
+            Err(IsMaskedError)
+        } else {
+            Ok(((self.port_reg().datain().read().bits() >> self.id().num) & 0x01) == 1)
+        }
+    }
+
+    /// Write the logic level of an output pin
+    #[inline(always)]
+    pub(crate) fn write_pin(&mut self, bit: bool) {
+        // Safety: SETOUT is a "mask" register, and we only write the bit for
+        // this pin ID
+        unsafe {
+            if bit {
+                self.port_reg().setout().write(|w| w.bits(self.mask_32()));
+            } else {
+                self.port_reg().clrout().write(|w| w.bits(self.mask_32()));
+            }
+        }
+    }
+
+    /// Write the logic level of an output pin but check whether the datamask for the pin is
+    /// cleared as well
+    #[inline]
+    fn write_pin_masked(&mut self, bit: bool) -> Result<(), IsMaskedError> {
+        if !self.datamask() {
+            Err(IsMaskedError)
+        } else {
+            // Safety: SETOUT is a "mask" register, and we only write the bit for
+            // this pin ID
+            unsafe {
+                if bit {
+                    self.port_reg().setout().write(|w| w.bits(self.mask_32()));
+                } else {
+                    self.port_reg().clrout().write(|w| w.bits(self.mask_32()));
+                }
+                Ok(())
+            }
+        }
+    }
+
+    /// Toggle the logic level of an output pin
+    #[inline(always)]
+    pub fn toggle_with_togout_reg(&mut self) {
+        // Safety: TOGOUT is a "mask" register, and we only write the bit for
+        // this pin ID
+        unsafe { self.port_reg().togout().write(|w| w.bits(self.mask_32())) };
+    }
+
+    /// Only useful for interrupt pins. Configure whether to use edges or level as interrupt soure
+    /// When using edge mode, it is possible to generate interrupts on both edges as well
+    #[inline]
+    fn configure_edge_interrupt_internal(&mut self, edge_type: InterruptEdge) {
+        unsafe {
+            self.port_reg()
+                .irq_sen()
+                .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            match edge_type {
+                InterruptEdge::HighToLow => {
+                    self.port_reg()
+                        .irq_evt()
+                        .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+                }
+                InterruptEdge::LowToHigh => {
+                    self.port_reg()
+                        .irq_evt()
+                        .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+                }
+                InterruptEdge::BothEdges => {
+                    self.port_reg()
+                        .irq_edge()
+                        .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+                }
+            }
+        }
+    }
+
+    /// Configure which edge or level type triggers an interrupt
+    #[inline]
+    fn configure_level_interrupt_internal(&mut self, level: InterruptLevel) {
+        unsafe {
+            self.port_reg()
+                .irq_sen()
+                .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            if level == InterruptLevel::Low {
+                self.port_reg()
+                    .irq_evt()
+                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            } else {
+                self.port_reg()
+                    .irq_evt()
+                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            }
+        }
+    }
+
+    /// Only useful for input pins
+    #[inline]
+    fn configure_filter_type_internal(&mut self, filter: FilterType, clksel: FilterClkSel) {
+        self.iocfg_port().modify(|_, w| {
+            // Safety: Only write to register for this Pin ID
+            unsafe {
+                w.flttype().bits(filter as u8);
+                w.fltclk().bits(clksel as u8)
+            }
+        });
+    }
+
+    #[inline]
+    fn configure_pulse_mode_internal(&mut self, enable: bool, default_state: PinState) {
+        let portreg = self.port_reg();
+        unsafe {
+            if enable {
+                portreg
+                    .pulse()
+                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            } else {
+                portreg
+                    .pulse()
+                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            }
+            if default_state == PinState::Low {
+                portreg
+                    .pulsebase()
+                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            } else {
+                portreg
+                    .pulsebase()
+                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            }
+        }
+    }
+
+    /// Only useful for output pins
+    #[inline]
+    fn configure_delay_internal(&mut self, delay_1: bool, delay_2: bool) {
+        let portreg = self.port_reg();
+        unsafe {
+            if delay_1 {
+                portreg
+                    .delay1()
+                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            } else {
+                portreg
+                    .delay1()
+                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            }
+            if delay_2 {
+                portreg
+                    .delay2()
+                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
+            } else {
+                portreg
+                    .delay2()
+                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
+            }
+        }
+    }
+
+    // Only serves disambiguation purposes for the Embedded HAL impl
+    #[inline(always)]
+    fn is_low_mut(&mut self) -> Result<bool, InvalidPinTypeError> {
+        self.is_low()
+    }
+
+    // Only serves disambiguation purposes for the Embedded HAL impl
+    #[inline(always)]
+    fn is_high_mut(&mut self) -> Result<bool, InvalidPinTypeError> {
+        self.is_high()
+    }
+
+    #[inline(always)]
+    const fn mask_32(&self) -> u32 {
+        1 << self.id().num()
+    }
 }
 
 //==================================================================================================
@@ -583,33 +910,38 @@ impl embedded_hal::digital::ErrorType for DynPin {
 impl embedded_hal::digital::OutputPin for DynPin {
     #[inline]
     fn set_high(&mut self) -> Result<(), Self::Error> {
-        self._set_high()
+        self.set_high()
     }
     #[inline]
     fn set_low(&mut self) -> Result<(), Self::Error> {
-        self._set_low()
+        self.set_low()
     }
 }
 
 impl embedded_hal::digital::InputPin for DynPin {
     #[inline]
     fn is_high(&mut self) -> Result<bool, Self::Error> {
-        self._is_high()
+        self.is_high_mut()
     }
     #[inline]
     fn is_low(&mut self) -> Result<bool, Self::Error> {
-        self._is_low()
+        self.is_low_mut()
     }
 }
 
 impl embedded_hal::digital::StatefulOutputPin for DynPin {
     #[inline]
     fn is_set_high(&mut self) -> Result<bool, Self::Error> {
-        self._is_high()
+        self.is_high_mut()
     }
 
     #[inline]
     fn is_set_low(&mut self) -> Result<bool, Self::Error> {
-        self._is_low()
+        self.is_low_mut()
+    }
+
+    #[inline]
+    fn toggle(&mut self) -> Result<(), Self::Error> {
+        self.toggle()
     }
 }

va108xx-hal/src/gpio/mod.rs

@@ -22,14 +22,47 @@
 //!
 //! - [Blinky example](https://egit.irs.uni-stuttgart.de/rust/va108xx-rs/src/branch/main/examples/simple/examples/blinky.rs)
 
+//==================================================================================================
+//  Errors, Definitions and Constants
+//==================================================================================================
+
+pub const NUM_PINS_PORT_A: usize = 32;
+pub const NUM_PINS_PORT_B: usize = 24;
+pub const NUM_GPIO_PINS: usize = NUM_PINS_PORT_A + NUM_PINS_PORT_B;
+
 #[derive(Debug, PartialEq, Eq, thiserror::Error)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[error("The pin is masked")]
 pub struct IsMaskedError;
 
-pub const NUM_PINS_PORT_A: usize = 32;
-pub const NUM_PINS_PORT_B: usize = 24;
-pub const NUM_GPIO_PINS: usize = NUM_PINS_PORT_A + NUM_PINS_PORT_B;
+#[derive(Debug, PartialEq, Eq, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum Port {
+    A,
+    B,
+}
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum InterruptEdge {
+    HighToLow,
+    LowToHigh,
+    BothEdges,
+}
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum InterruptLevel {
+    Low = 0,
+    High = 1,
+}
+
+#[derive(Debug, PartialEq, Eq)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
+pub enum PinState {
+    Low = 0,
+    High = 1,
+}
 
 pub mod dynpin;
 pub use dynpin::*;
@@ -39,5 +72,3 @@ pub use pin::*;
 
 pub mod asynch;
 pub use asynch::*;
-
-mod reg;

va108xx-hal/src/gpio/pin.rs

@@ -68,45 +68,19 @@
 //! # Embedded HAL traits
 //!
 //! This module implements all of the embedded HAL GPIO traits for each [`Pin`]
-//! in the corresponding [`PinMode`]s, namely: [`InputPin`], [`OutputPin`],
-//! and [`StatefulOutputPin`].
-use super::dynpin::{DynAlternate, DynGroup, DynInput, DynOutput, DynPinId, DynPinMode};
-use super::reg::RegisterInterface;
-use super::{DynPin, InputPinAsync};
+//! in the corresponding [`PinMode`]s, namely: [embedded_hal::digital::InputPin],
+//! [embedded_hal::digital::OutputPin] and [embedded_hal::digital::StatefulOutputPin].
+use super::dynpin::{DynAlternate, DynInput, DynOutput, DynPinId, DynPinMode};
+use super::{DynPin, InputPinAsync, InterruptEdge, InterruptLevel, PinState, Port};
 use crate::{
-    pac::{Irqsel, Porta, Portb, Sysconfig},
+    pac::{Porta, Portb},
     typelevel::Sealed,
-    InterruptConfig,
 };
 use core::convert::Infallible;
 use core::marker::PhantomData;
 use core::mem::transmute;
-use embedded_hal::digital::{InputPin, OutputPin, StatefulOutputPin};
 use paste::paste;
 
-//==================================================================================================
-//  Errors and Definitions
-//==================================================================================================
-
-#[derive(Debug, PartialEq, Eq)]
-pub enum InterruptEdge {
-    HighToLow,
-    LowToHigh,
-    BothEdges,
-}
-
-#[derive(Debug, PartialEq, Eq)]
-pub enum InterruptLevel {
-    Low = 0,
-    High = 1,
-}
-
-#[derive(Debug, PartialEq, Eq)]
-pub enum PinState {
-    Low = 0,
-    High = 1,
-}
-
 //==================================================================================================
 // Input configuration
 //==================================================================================================
@@ -317,10 +291,7 @@ macro_rules! pin_id {
             pub enum $Id {}
             impl Sealed for $Id {}
             impl PinId for $Id {
-                const DYN: DynPinId = DynPinId {
-                    group: DynGroup::$Group,
-                    num: $NUM,
-                };
+                const DYN: DynPinId = DynPinId::new(Port::$Group, $NUM);
             }
         }
     };
@@ -346,14 +317,15 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
     /// at most one corresponding [Pin] in existence at any given time.
     /// Violating this requirement is `unsafe`.
     #[inline]
-    pub(crate) unsafe fn new() -> Pin<I, M> {
+    pub(crate) const unsafe fn new() -> Pin<I, M> {
         Pin {
             inner: DynPin::new(I::DYN, M::DYN),
             phantom: PhantomData,
         }
     }
 
-    pub fn id(&self) -> DynPinId {
+    #[inline]
+    pub const fn id(&self) -> DynPinId {
         self.inner.id()
     }
 
@@ -363,7 +335,7 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
         // Only modify registers if we are actually changing pin mode
         // This check should compile away
         if N::DYN != M::DYN {
-            self.inner.regs.change_mode(N::DYN);
+            self.inner.change_mode(N::DYN);
         }
         // Safe because we drop the existing Pin
         unsafe { Pin::new() }
@@ -423,6 +395,16 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
         self.into_mode()
     }
 
+    #[inline]
+    pub fn is_low(&self) -> bool {
+        !self.inner.read_pin()
+    }
+
+    #[inline]
+    pub fn is_high(&self) -> bool {
+        self.inner.read_pin()
+    }
+
     #[inline]
     pub fn datamask(&self) -> bool {
         self.inner.datamask()
@@ -448,53 +430,41 @@ impl<I: PinId, M: PinMode> Pin<I, M> {
         self.inner.is_low_masked()
     }
 
-    #[inline]
-    pub fn set_high_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
-        self.inner.set_high_masked()
-    }
-
-    #[inline]
-    pub fn set_low_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
-        self.inner.set_low_masked()
-    }
-
     #[inline]
     pub fn downgrade(self) -> DynPin {
         self.inner
     }
 
-    fn irq_enb(
-        &mut self,
-        irq_cfg: crate::InterruptConfig,
-        syscfg: Option<&mut va108xx::Sysconfig>,
-        irqsel: Option<&mut va108xx::Irqsel>,
-    ) {
-        self.inner.irq_enb(irq_cfg, syscfg, irqsel);
+    // Those only serve for the embedded HAL implementations which have different mutability.
+
+    #[inline]
+    fn is_low_mut(&mut self) -> bool {
+        self.is_low()
     }
 
     #[inline]
-    pub(crate) fn _set_high(&mut self) {
-        self.inner.regs.write_pin(true)
+    fn is_high_mut(&mut self) -> bool {
+        self.is_high()
     }
 
     #[inline]
-    pub(crate) fn _set_low(&mut self) {
-        self.inner.regs.write_pin(false)
+    pub fn enable_interrupt(&mut self, irq_cfg: crate::InterruptConfig) {
+        self.inner.enable_interrupt(irq_cfg);
     }
 
     #[inline]
-    pub(crate) fn _toggle_with_toggle_reg(&mut self) {
-        self.inner.regs.toggle();
+    pub fn disable_interrupt(&mut self, reset_irqsel: bool) {
+        self.inner.disable_interrupt(reset_irqsel);
     }
 
-    #[inline]
-    pub(crate) fn _is_low(&self) -> bool {
-        !self.inner.regs.read_pin()
+    /// Configure the pin for an edge interrupt but does not enable the interrupt.
+    pub fn configure_edge_interrupt(&mut self, edge_type: InterruptEdge) {
+        self.inner.configure_edge_interrupt(edge_type).unwrap();
     }
 
-    #[inline]
-    pub(crate) fn _is_high(&self) -> bool {
-        self.inner.regs.read_pin()
+    /// Configure the pin for a level interrupt but does not enable the interrupt.
+    pub fn configure_level_interrupt(&mut self, level_type: InterruptLevel) {
+        self.inner.configure_level_interrupt(level_type).unwrap();
     }
 }
 
@@ -591,74 +561,52 @@ impl<I: PinId, C: InputConfig> Pin<I, Input<C>> {
     pub fn into_async_input(self, irq: crate::pac::Interrupt) -> InputPinAsync<I, C> {
         InputPinAsync::new(self, irq)
     }
-
-    pub fn configure_edge_interrupt(
-        &mut self,
-        edge_type: InterruptEdge,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut Sysconfig>,
-        irqsel: Option<&mut Irqsel>,
-    ) {
-        self.inner.regs.interrupt_edge(edge_type);
-        self.irq_enb(irq_cfg, syscfg, irqsel);
-    }
-
-    pub fn configure_level_interrupt(
-        &mut self,
-        level_type: InterruptLevel,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut Sysconfig>,
-        irqsel: Option<&mut Irqsel>,
-    ) {
-        self.inner.regs.interrupt_level(level_type);
-        self.irq_enb(irq_cfg, syscfg, irqsel);
-    }
 }
 
 impl<I: PinId, C: OutputConfig> Pin<I, Output<C>> {
+    #[inline]
+    pub fn set_high(&mut self) {
+        self.inner.write_pin(true)
+    }
+
+    #[inline]
+    pub fn set_low(&mut self) {
+        self.inner.write_pin(false)
+    }
+
+    #[inline]
+    pub fn toggle(&mut self) {
+        self.inner.toggle().unwrap()
+    }
+
+    #[inline]
+    pub fn set_high_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
+        self.inner.set_high_masked()
+    }
+
+    #[inline]
+    pub fn set_low_masked(&mut self) -> Result<(), crate::gpio::IsMaskedError> {
+        self.inner.set_low_masked()
+    }
+
     /// See p.53 of the programmers guide for more information.
     /// Possible delays in clock cycles:
     ///  - Delay 1: 1
     ///  - Delay 2: 2
     ///  - Delay 1 + Delay 2: 3
     #[inline]
-    pub fn delay(self, delay_1: bool, delay_2: bool) -> Self {
-        self.inner.regs.delay(delay_1, delay_2);
-        self
-    }
-
-    #[inline]
-    pub fn toggle_with_toggle_reg(&mut self) {
-        self._toggle_with_toggle_reg()
+    pub fn configure_delay(&mut self, delay_1: bool, delay_2: bool) {
+        self.inner.configure_delay(delay_1, delay_2).unwrap();
     }
 
     /// See p.52 of the programmers guide for more information.
+    ///
     /// When configured for pulse mode, a given pin will set the non-default state for exactly
     /// one clock cycle before returning to the configured default state
-    pub fn pulse_mode(&mut self, enable: bool, default_state: PinState) {
-        self.inner.regs.pulse_mode(enable, default_state);
-    }
-
-    pub fn interrupt_edge(
-        &mut self,
-        edge_type: InterruptEdge,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut Sysconfig>,
-        irqsel: Option<&mut Irqsel>,
-    ) {
-        self.inner.regs.interrupt_edge(edge_type);
-        self.irq_enb(irq_cfg, syscfg, irqsel);
-    }
-
-    pub fn interrupt_level(
-        &mut self,
-        level_type: InterruptLevel,
-        irq_cfg: InterruptConfig,
-        syscfg: Option<&mut Sysconfig>,
-        irqsel: Option<&mut Irqsel>,
-    ) {
-        self.inner.regs.interrupt_level(level_type);
-        self.irq_enb(irq_cfg, syscfg, irqsel);
+    pub fn configure_pulse_mode(&mut self, enable: bool, default_state: PinState) {
+        self.inner
+            .configure_pulse_mode(enable, default_state)
+            .unwrap();
     }
 }
 
@@ -666,7 +614,7 @@ impl<I: PinId, C: InputConfig> Pin<I, Input<C>> {
     /// See p.37 and p.38 of the programmers guide for more information.
     #[inline]
     pub fn configure_filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
-        self.inner.regs.filter_type(filter, clksel);
+        self.inner.configure_filter_type(filter, clksel).unwrap();
     }
 }
 
@@ -682,63 +630,53 @@ where
     type Error = Infallible;
 }
 
-impl<I: PinId, C: OutputConfig> OutputPin for Pin<I, Output<C>> {
+impl<I: PinId, C: OutputConfig> embedded_hal::digital::OutputPin for Pin<I, Output<C>> {
     #[inline]
     fn set_high(&mut self) -> Result<(), Self::Error> {
-        self._set_high();
+        self.set_high();
         Ok(())
     }
 
     #[inline]
     fn set_low(&mut self) -> Result<(), Self::Error> {
-        self._set_low();
+        self.set_low();
         Ok(())
     }
 }
 
-impl<I, C> InputPin for Pin<I, Input<C>>
+impl<I, C> embedded_hal::digital::InputPin for Pin<I, Input<C>>
 where
     I: PinId,
     C: InputConfig,
 {
     #[inline]
     fn is_high(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_high())
+        Ok(self.is_high_mut())
     }
     #[inline]
     fn is_low(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_low())
+        Ok(self.is_low_mut())
     }
 }
 
-impl<I, C> StatefulOutputPin for Pin<I, Output<C>>
+impl<I, C> embedded_hal::digital::StatefulOutputPin for Pin<I, Output<C>>
 where
     I: PinId,
     C: OutputConfig + ReadableOutput,
 {
     #[inline]
     fn is_set_high(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_high())
+        Ok(self.is_high())
     }
     #[inline]
     fn is_set_low(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_low())
-    }
-}
-
-impl<I, C> InputPin for Pin<I, Output<C>>
-where
-    I: PinId,
-    C: OutputConfig + ReadableOutput,
-{
-    #[inline]
-    fn is_high(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_high())
+        Ok(self.is_low())
     }
 
     #[inline]
-    fn is_low(&mut self) -> Result<bool, Self::Error> {
-        Ok(self._is_low())
+    fn toggle(&mut self) -> Result<(), Self::Error> {
+        self.toggle();
+        Ok(())
     }
 }
 

va108xx-hal/src/gpio/reg.rs

@@ -1,375 +0,0 @@
-use super::dynpin::{self, DynGroup, DynPinId, DynPinMode};
-use super::pin::{FilterType, InterruptEdge, InterruptLevel, PinState};
-use super::IsMaskedError;
-use crate::clock::FilterClkSel;
-use va108xx::{ioconfig, porta};
-
-/// Type definition to avoid confusion: These register blocks are identical
-type PortRegisterBlock = porta::RegisterBlock;
-
-//==================================================================================================
-//  ModeFields
-//==================================================================================================
-
-/// Collect all fields needed to set the [`PinMode`](super::PinMode)
-#[derive(Default)]
-struct ModeFields {
-    dir: bool,
-    opendrn: bool,
-    pull_en: bool,
-    /// true for pullup, false for pulldown
-    pull_dir: bool,
-    funsel: u8,
-    enb_input: bool,
-}
-
-impl From<DynPinMode> for ModeFields {
-    #[inline]
-    fn from(mode: DynPinMode) -> Self {
-        let mut fields = Self::default();
-        use DynPinMode::*;
-        match mode {
-            Input(config) => {
-                use dynpin::DynInput::*;
-                fields.dir = false;
-                match config {
-                    Floating => (),
-                    PullUp => {
-                        fields.pull_en = true;
-                        fields.pull_dir = true;
-                    }
-                    PullDown => {
-                        fields.pull_en = true;
-                    }
-                }
-            }
-            Output(config) => {
-                use dynpin::DynOutput::*;
-                fields.dir = true;
-                match config {
-                    PushPull => (),
-                    OpenDrain => {
-                        fields.opendrn = true;
-                    }
-                    ReadableOpenDrain => {
-                        fields.enb_input = true;
-                        fields.opendrn = true;
-                    }
-                    ReadablePushPull => {
-                        fields.enb_input = true;
-                    }
-                }
-            }
-            Alternate(config) => {
-                fields.funsel = config as u8;
-            }
-        }
-        fields
-    }
-}
-
-//==================================================================================================
-// Register Interface
-//==================================================================================================
-
-pub type PortReg = ioconfig::Porta;
-
-/// Provide a safe register interface for pin objects
-///
-/// [`PORTA`] and [`PORTB`], like every PAC `struct`, is [`Send`] but not [`Sync`], because it
-/// points to a `RegisterBlock` of `VolatileCell`s. Unfortunately, such an
-/// interface is quite restrictive. Instead, it would be ideal if we could split
-/// the [`PORT`] into independent pins that are both [`Send`] and [`Sync`].
-///
-/// [`PORT`] is a single, zero-sized marker `struct` that provides access to
-/// every [`PORT`] register. Instead, we would like to create zero-sized marker
-/// `struct`s for every pin, where each pin is only allowed to control its own
-/// registers. Furthermore, each pin `struct` should be a singleton, so that
-/// exclusive access to the `struct` also guarantees exclusive access to the
-/// corresponding registers. Finally, the pin `struct`s should not have any
-/// interior mutability. Together, these requirements would allow the pin
-/// `struct`s to be both [`Send`] and [`Sync`].
-///
-/// This trait creates a safe API for accomplishing these goals. Implementers
-/// supply a pin ID through the [`id`] function. The remaining functions provide
-/// a safe API for accessing the registers associated with that pin ID. Any
-/// modification of the registers requires `&mut self`, which destroys interior
-/// mutability.
-///
-/// # Safety
-///
-/// Users should only implement the [`id`] function. No default function
-/// implementations should be overridden. The implementing type must also have
-/// "control" over the corresponding pin ID, i.e. it must guarantee that a each
-/// pin ID is a singleton.
-///
-/// [`id`]: Self::id
-pub(super) unsafe trait RegisterInterface {
-    /// Provide a [`DynPinId`] identifying the set of registers controlled by
-    /// this type.
-    fn id(&self) -> DynPinId;
-
-    const PORTA: *const PortRegisterBlock = va108xx::Porta::ptr();
-    const PORTB: *const PortRegisterBlock = va108xx::Portb::ptr();
-
-    /// Change the pin mode
-    #[inline]
-    fn change_mode(&mut self, mode: DynPinMode) {
-        let ModeFields {
-            dir,
-            funsel,
-            opendrn,
-            pull_dir,
-            pull_en,
-            enb_input,
-        } = mode.into();
-        let (portreg, iocfg) = (self.port_reg(), self.iocfg_port());
-        iocfg.write(|w| {
-            w.opendrn().bit(opendrn);
-            w.pen().bit(pull_en);
-            w.plevel().bit(pull_dir);
-            w.iewo().bit(enb_input);
-            unsafe { w.funsel().bits(funsel) }
-        });
-        let mask = self.mask_32();
-        unsafe {
-            if dir {
-                portreg.dir().modify(|r, w| w.bits(r.bits() | mask));
-                // Clear output
-                portreg.clrout().write(|w| w.bits(mask));
-            } else {
-                portreg.dir().modify(|r, w| w.bits(r.bits() & !mask));
-            }
-        }
-    }
-
-    #[inline]
-    fn port_reg(&self) -> &PortRegisterBlock {
-        match self.id().group {
-            DynGroup::A => unsafe { &(*Self::PORTA) },
-            DynGroup::B => unsafe { &(*Self::PORTB) },
-        }
-    }
-    fn iocfg_port(&self) -> &PortReg {
-        let ioconfig = unsafe { va108xx::Ioconfig::ptr().as_ref().unwrap() };
-        match self.id().group {
-            DynGroup::A => ioconfig.porta(self.id().num as usize),
-            DynGroup::B => ioconfig.portb0(self.id().num as usize),
-        }
-    }
-
-    #[inline]
-    fn mask_32(&self) -> u32 {
-        1 << self.id().num
-    }
-
-    #[inline]
-    fn enable_irq(&self) {
-        self.port_reg()
-            .irq_enb()
-            .modify(|r, w| unsafe { w.bits(r.bits() | self.mask_32()) });
-    }
-
-    #[inline]
-    /// Read the logic level of an output pin
-    fn read_pin(&self) -> bool {
-        let portreg = self.port_reg();
-        ((portreg.datainraw().read().bits() >> self.id().num) & 0x01) == 1
-    }
-
-    // Get DATAMASK bit for this particular pin
-    #[inline(always)]
-    fn datamask(&self) -> bool {
-        let portreg = self.port_reg();
-        (portreg.datamask().read().bits() >> self.id().num) == 1
-    }
-
-    /// Read a pin but use the masked version but check whether the datamask for the pin is
-    /// cleared as well
-    #[inline(always)]
-    fn read_pin_masked(&self) -> Result<bool, IsMaskedError> {
-        if !self.datamask() {
-            Err(IsMaskedError)
-        } else {
-            Ok(((self.port_reg().datain().read().bits() >> self.id().num) & 0x01) == 1)
-        }
-    }
-
-    /// Write the logic level of an output pin
-    #[inline(always)]
-    fn write_pin(&mut self, bit: bool) {
-        // Safety: SETOUT is a "mask" register, and we only write the bit for
-        // this pin ID
-        unsafe {
-            if bit {
-                self.port_reg().setout().write(|w| w.bits(self.mask_32()));
-            } else {
-                self.port_reg().clrout().write(|w| w.bits(self.mask_32()));
-            }
-        }
-    }
-
-    /// Write the logic level of an output pin but check whether the datamask for the pin is
-    /// cleared as well
-    #[inline]
-    fn write_pin_masked(&mut self, bit: bool) -> Result<(), IsMaskedError> {
-        if !self.datamask() {
-            Err(IsMaskedError)
-        } else {
-            // Safety: SETOUT is a "mask" register, and we only write the bit for
-            // this pin ID
-            unsafe {
-                if bit {
-                    self.port_reg().setout().write(|w| w.bits(self.mask_32()));
-                } else {
-                    self.port_reg().clrout().write(|w| w.bits(self.mask_32()));
-                }
-                Ok(())
-            }
-        }
-    }
-
-    /// Toggle the logic level of an output pin
-    #[inline(always)]
-    fn toggle(&mut self) {
-        // Safety: TOGOUT is a "mask" register, and we only write the bit for
-        // this pin ID
-        unsafe { self.port_reg().togout().write(|w| w.bits(self.mask_32())) };
-    }
-
-    /// Only useful for interrupt pins. Configure whether to use edges or level as interrupt soure
-    /// When using edge mode, it is possible to generate interrupts on both edges as well
-    #[inline]
-    fn interrupt_edge(&mut self, edge_type: InterruptEdge) {
-        unsafe {
-            self.port_reg()
-                .irq_sen()
-                .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            match edge_type {
-                InterruptEdge::HighToLow => {
-                    self.port_reg()
-                        .irq_evt()
-                        .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-                }
-                InterruptEdge::LowToHigh => {
-                    self.port_reg()
-                        .irq_evt()
-                        .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-                }
-                InterruptEdge::BothEdges => {
-                    self.port_reg()
-                        .irq_edge()
-                        .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-                }
-            }
-        }
-    }
-
-    /// Configure which edge or level type triggers an interrupt
-    #[inline]
-    fn interrupt_level(&mut self, level: InterruptLevel) {
-        unsafe {
-            self.port_reg()
-                .irq_sen()
-                .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            if level == InterruptLevel::Low {
-                self.port_reg()
-                    .irq_evt()
-                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            } else {
-                self.port_reg()
-                    .irq_evt()
-                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            }
-        }
-    }
-
-    /// Only useful for input pins
-    #[inline]
-    fn filter_type(&mut self, filter: FilterType, clksel: FilterClkSel) {
-        self.iocfg_port().modify(|_, w| {
-            // Safety: Only write to register for this Pin ID
-            unsafe {
-                w.flttype().bits(filter as u8);
-                w.fltclk().bits(clksel as u8)
-            }
-        });
-    }
-
-    /// Set DATAMASK bit for this particular pin. 1 is the default
-    /// state of the bit and allows access of the corresponding bit
-    #[inline(always)]
-    fn set_datamask(&self) {
-        let portreg = self.port_reg();
-        unsafe {
-            portreg
-                .datamask()
-                .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-        }
-    }
-
-    /// Clear DATAMASK bit for this particular pin. This prevents access
-    /// of the corresponding bit for output and input operations
-    #[inline(always)]
-    fn clear_datamask(&self) {
-        let portreg = self.port_reg();
-        unsafe {
-            portreg
-                .datamask()
-                .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-        }
-    }
-
-    /// Only useful for output pins
-    /// See p.52 of the programmers guide for more information.
-    /// When configured for pulse mode, a given pin will set the non-default state for exactly
-    /// one clock cycle before returning to the configured default state
-    fn pulse_mode(&mut self, enable: bool, default_state: PinState) {
-        let portreg = self.port_reg();
-        unsafe {
-            if enable {
-                portreg
-                    .pulse()
-                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            } else {
-                portreg
-                    .pulse()
-                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            }
-            if default_state == PinState::Low {
-                portreg
-                    .pulsebase()
-                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            } else {
-                portreg
-                    .pulsebase()
-                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            }
-        }
-    }
-
-    /// Only useful for output pins
-    fn delay(&self, delay_1: bool, delay_2: bool) {
-        let portreg = self.port_reg();
-        unsafe {
-            if delay_1 {
-                portreg
-                    .delay1()
-                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            } else {
-                portreg
-                    .delay1()
-                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            }
-            if delay_2 {
-                portreg
-                    .delay2()
-                    .modify(|r, w| w.bits(r.bits() | self.mask_32()));
-            } else {
-                portreg
-                    .delay2()
-                    .modify(|r, w| w.bits(r.bits() & !self.mask_32()));
-            }
-        }
-    }
-}

va108xx-hal/src/i2c.rs

@@ -36,8 +36,6 @@ pub struct InvalidTimingParamsError;
 #[derive(Debug, PartialEq, Eq, thiserror::Error)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum Error {
-    //#[error("Invalid timing parameters")]
-    //InvalidTimingParams,
     #[error("arbitration lost")]
     ArbitrationLost,
     #[error("nack address")]
@@ -82,6 +80,7 @@ impl embedded_hal::i2c::Error for Error {
 }
 
 #[derive(Debug, PartialEq, Copy, Clone)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 enum I2cCmd {
     Start = 0b00,
     Stop = 0b10,
@@ -252,6 +251,8 @@ impl Default for MasterConfig {
 
 impl Sealed for MasterConfig {}
 
+#[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct SlaveConfig {
     pub tx_fe_mode: FifoEmptyMode,
     pub rx_fe_mode: FifoEmptyMode,
@@ -455,13 +456,6 @@ impl<I2c: Instance> I2cBase<I2c> {
     }
 }
 
-// Unique mode to use the loopback functionality
-// pub struct I2cLoopback<I2C> {
-//     i2c_base: I2cBase<I2C>,
-//     master_cfg: MasterConfig,
-//     slave_cfg: SlaveConfig,
-// }
-
 //==================================================================================================
 // I2C Master
 //==================================================================================================
@@ -673,275 +667,6 @@ impl<I2c: Instance, Addr> I2cMaster<I2c, Addr> {
     }
 }
 
-/*
-macro_rules! i2c_master {
-    ($($I2CX:path: ($i2cx:ident, $clk_enb:path),)+) => {
-        $(
-            impl<ADDR> I2cMaster<$I2CX, ADDR> {
-                pub fn $i2cx(
-                    i2c: $I2CX,
-                    cfg: MasterConfig,
-                    sys_clk: impl Into<Hertz> + Copy,
-                    speed_mode: I2cSpeed,
-                    sys_cfg: Option<&mut pac::Sysconfig>,
-                ) -> Self {
-                    I2cMaster {
-                        i2c_base: I2cBase::$i2cx(
-                            i2c,
-                            sys_clk,
-                            speed_mode,
-                            Some(&cfg),
-                            None,
-                            sys_cfg
-                        ),
-                        _addr: PhantomData,
-                    }
-                    .enable_master()
-                }
-
-                #[inline]
-                pub fn cancel_transfer(&self) {
-                    self.i2c_base
-                        .i2c
-                        .cmd()
-                        .write(|w| unsafe { w.bits(I2cCmd::Cancel as u32) });
-                }
-
-                #[inline]
-                pub fn clear_tx_fifo(&self) {
-                    self.i2c_base.i2c.fifo_clr().write(|w| w.txfifo().set_bit());
-                }
-
-                #[inline]
-                pub fn clear_rx_fifo(&self) {
-                    self.i2c_base.i2c.fifo_clr().write(|w| w.rxfifo().set_bit());
-                }
-
-                #[inline]
-                pub fn enable_master(self) -> Self {
-                    self.i2c_base.i2c.ctrl().modify(|_, w| w.enable().set_bit());
-                    self
-                }
-
-                #[inline]
-                pub fn disable_master(self) -> Self {
-                    self.i2c_base.i2c.ctrl().modify(|_, w| w.enable().clear_bit());
-                    self
-                }
-
-                #[inline(always)]
-                fn load_fifo(&self, word: u8) {
-                    self.i2c_base
-                        .i2c
-                        .data()
-                        .write(|w| unsafe { w.bits(word as u32) });
-                }
-
-                #[inline(always)]
-                fn read_fifo(&self) -> u8 {
-                    self.i2c_base.i2c.data().read().bits() as u8
-                }
-
-                fn error_handler_write(&mut self, init_cmd: &I2cCmd) {
-                    self.clear_tx_fifo();
-                    if *init_cmd == I2cCmd::Start {
-                        self.i2c_base.stop_cmd()
-                    }
-                }
-
-                fn write_base(
-                    &mut self,
-                    addr: I2cAddress,
-                    init_cmd: I2cCmd,
-                    bytes: impl IntoIterator<Item = u8>,
-                ) -> Result<(), Error> {
-                    let mut iter = bytes.into_iter();
-                    // Load address
-                    let (addr, addr_mode_bit) = I2cBase::<$I2CX>::unwrap_addr(addr);
-                    self.i2c_base.i2c.address().write(|w| unsafe {
-                        w.bits(I2cDirection::Send as u32 | (addr << 1) as u32 | addr_mode_bit)
-                    });
-
-                    self.i2c_base
-                        .i2c
-                        .cmd()
-                        .write(|w| unsafe { w.bits(init_cmd as u32) });
-                    let mut load_if_next_available = || {
-                        if let Some(next_byte) = iter.next() {
-                            self.load_fifo(next_byte);
-                        }
-                    };
-                    loop {
-                        let status_reader = self.i2c_base.i2c.status().read();
-                        if status_reader.arblost().bit_is_set() {
-                            self.error_handler_write(&init_cmd);
-                            return Err(Error::ArbitrationLost);
-                        } else if status_reader.nackaddr().bit_is_set() {
-                            self.error_handler_write(&init_cmd);
-                            return Err(Error::NackAddr);
-                        } else if status_reader.nackdata().bit_is_set() {
-                            self.error_handler_write(&init_cmd);
-                            return Err(Error::NackData);
-                        } else if status_reader.idle().bit_is_set() {
-                            return Ok(());
-                        } else {
-                            while !status_reader.txnfull().bit_is_set() {
-                                load_if_next_available();
-                            }
-                        }
-                    }
-                }
-
-                fn write_from_buffer(
-                    &mut self,
-                    init_cmd: I2cCmd,
-                    addr: I2cAddress,
-                    output: &[u8],
-                ) -> Result<(), Error> {
-                    let len = output.len();
-                    // It should theoretically possible to transfer larger data sizes by tracking
-                    // the number of sent words and setting it to 0x7fe as soon as only that many
-                    // bytes are remaining. However, large transfer like this are not common. This
-                    // feature will therefore not be supported for now.
-                    if len > 0x7fe {
-                        return Err(Error::DataTooLarge);
-                    }
-                    // Load number of words
-                    self.i2c_base
-                        .i2c
-                        .words()
-                        .write(|w| unsafe { w.bits(len as u32) });
-                    let mut bytes = output.iter();
-                    // FIFO has a depth of 16. We load slightly above the trigger level
-                    // but not all of it because the transaction might fail immediately
-                    const FILL_DEPTH: usize = 12;
-
-                    // load the FIFO
-                    for _ in 0..core::cmp::min(FILL_DEPTH, len) {
-                        self.load_fifo(*bytes.next().unwrap());
-                    }
-
-                    self.write_base(addr, init_cmd, output.iter().cloned())
-                }
-
-                fn read_internal(&mut self, addr: I2cAddress, buffer: &mut [u8]) -> Result<(), Error> {
-                    let len = buffer.len();
-                    // It should theoretically possible to transfer larger data sizes by tracking
-                    // the number of sent words and setting it to 0x7fe as soon as only that many
-                    // bytes are remaining. However, large transfer like this are not common. This
-                    // feature will therefore not be supported for now.
-                    if len > 0x7fe {
-                        return Err(Error::DataTooLarge);
-                    }
-                    // Clear the receive FIFO
-                    self.clear_rx_fifo();
-
-                    // Load number of words
-                    self.i2c_base
-                        .i2c
-                        .words()
-                        .write(|w| unsafe { w.bits(len as u32) });
-                    let (addr, addr_mode_bit) = match addr {
-                        I2cAddress::Regular(addr) => (addr as u16, 0 << 15),
-                        I2cAddress::TenBit(addr) => (addr, 1 << 15),
-                    };
-                    // Load address
-                    self.i2c_base.i2c.address().write(|w| unsafe {
-                        w.bits(I2cDirection::Read as u32 | (addr << 1) as u32 | addr_mode_bit)
-                    });
-
-                    let mut buf_iter = buffer.iter_mut();
-                    let mut read_bytes = 0;
-                    // Start receive transfer
-                    self.i2c_base
-                        .i2c
-                        .cmd()
-                        .write(|w| unsafe { w.bits(I2cCmd::StartWithStop as u32) });
-                    let mut read_if_next_available = || {
-                        if let Some(next_byte) = buf_iter.next() {
-                            *next_byte = self.read_fifo();
-                        }
-                    };
-                    loop {
-                        let status_reader = self.i2c_base.i2c.status().read();
-                        if status_reader.arblost().bit_is_set() {
-                            self.clear_rx_fifo();
-                            return Err(Error::ArbitrationLost);
-                        } else if status_reader.nackaddr().bit_is_set() {
-                            self.clear_rx_fifo();
-                            return Err(Error::NackAddr);
-                        } else if status_reader.idle().bit_is_set() {
-                            if read_bytes != len {
-                                return Err(Error::InsufficientDataReceived);
-                            }
-                            return Ok(());
-                        } else if status_reader.rxnempty().bit_is_set() {
-                            read_if_next_available();
-                            read_bytes += 1;
-                        }
-                    }
-                }
-            }
-
-            //======================================================================================
-            // Embedded HAL I2C implementations
-            //======================================================================================
-
-            impl embedded_hal::i2c::ErrorType for I2cMaster<$I2CX, SevenBitAddress> {
-                type Error = Error;
-            }
-            impl embedded_hal::i2c::I2c for I2cMaster<$I2CX, SevenBitAddress> {
-                fn transaction(
-                    &mut self,
-                    address: SevenBitAddress,
-                    operations: &mut [Operation<'_>],
-                ) -> Result<(), Self::Error> {
-                    for operation in operations {
-                        match operation {
-                            Operation::Read(buf) => self.read_internal(I2cAddress::Regular(address), buf)?,
-                            Operation::Write(buf) => self.write_from_buffer(
-                                I2cCmd::StartWithStop,
-                                I2cAddress::Regular(address),
-                                buf,
-                            )?,
-                        }
-                    }
-                    Ok(())
-                }
-            }
-
-            impl embedded_hal::i2c::ErrorType for I2cMaster<$I2CX, TenBitAddress> {
-                type Error = Error;
-            }
-            impl embedded_hal::i2c::I2c<TenBitAddress> for I2cMaster<$I2CX, TenBitAddress> {
-                fn transaction(
-                    &mut self,
-                    address: TenBitAddress,
-                    operations: &mut [Operation<'_>],
-                ) -> Result<(), Self::Error> {
-                    for operation in operations {
-                        match operation {
-                            Operation::Read(buf) => self.read_internal(I2cAddress::TenBit(address), buf)?,
-                            Operation::Write(buf) => self.write_from_buffer(
-                                I2cCmd::StartWithStop,
-                                I2cAddress::TenBit(address),
-                                buf,
-                            )?,
-                        }
-                    }
-                    Ok(())
-                }
-            }
-        )+
-    }
-}
-
-i2c_master!(
-    pac::I2ca: (i2ca, PeripheralClocks::I2c0),
-    pac::I2cb: (i2cb, PeripheralClocks::I2c1),
-);
-*/
-
 //======================================================================================
 // Embedded HAL I2C implementations
 //======================================================================================

va108xx-hal/src/lib.rs

@@ -1,6 +1,7 @@
 #![no_std]
 #![cfg_attr(docsrs, feature(doc_auto_cfg))]
 
+use gpio::Port;
 pub use va108xx;
 pub use va108xx as pac;
 
@@ -19,6 +20,7 @@ pub mod uart;
 #[derive(Debug, Eq, Copy, Clone, PartialEq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum FunSel {
+    Sel0 = 0b00,
     Sel1 = 0b01,
     Sel2 = 0b10,
     Sel3 = 0b11,
@@ -26,13 +28,6 @@ pub enum FunSel {
 
 #[derive(Debug, Copy, Clone, PartialEq, Eq)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub enum PortSel {
-    PortA,
-    PortB,
-}
-
-#[derive(Copy, Clone, PartialEq, Eq)]
-#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum PeripheralSelect {
     PortA = 0,
     PortB = 1,
@@ -54,6 +49,7 @@ pub enum PeripheralSelect {
 /// Cortex-M0 NVIC. Both are generally necessary for IRQs to work, but the user might want to
 /// perform those steps themselves.
 #[derive(Debug, PartialEq, Eq, Clone, Copy)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct InterruptConfig {
     /// Interrupt target vector. Should always be set, might be required for disabling IRQs
     pub id: pac::Interrupt,
@@ -76,37 +72,33 @@ impl InterruptConfig {
 
 pub type IrqCfg = InterruptConfig;
 
-#[derive(Debug, PartialEq, Eq)]
+#[derive(Debug, PartialEq, Eq, thiserror::Error)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
-pub struct InvalidPin(pub(crate) ());
+#[error("invalid pin with number {0}")]
+pub struct InvalidPinError(u8);
 
-/// Can be used to manually manipulate the function select of port pins
+/// Can be used to manually manipulate the function select of port pins.
+///
+/// The function selection table can be found on p.36 of the programmers guide. Please note
+/// that most of the structures and APIs in this library will automatically correctly configure
+/// the pin or statically expect the correct pin type.
 pub fn port_function_select(
     ioconfig: &mut pac::Ioconfig,
-    port: PortSel,
+    port: Port,
     pin: u8,
     funsel: FunSel,
-) -> Result<(), InvalidPin> {
-    match port {
-        PortSel::PortA => {
-            if pin > 31 {
-                return Err(InvalidPin(()));
-            }
-            ioconfig
-                .porta(pin as usize)
-                .modify(|_, w| unsafe { w.funsel().bits(funsel as u8) });
-            Ok(())
-        }
-        PortSel::PortB => {
-            if pin > 23 {
-                return Err(InvalidPin(()));
-            }
-            ioconfig
-                .portb0(pin as usize)
-                .modify(|_, w| unsafe { w.funsel().bits(funsel as u8) });
-            Ok(())
-        }
+) -> Result<(), InvalidPinError> {
+    if (port == Port::A && pin >= 32) || (port == Port::B && pin >= 24) {
+        return Err(InvalidPinError(pin));
     }
+
+    let reg_block = match port {
+        Port::A => ioconfig.porta(pin as usize),
+        Port::B => ioconfig.portb0(pin as usize),
+    };
+
+    reg_block.modify(|_, w| unsafe { w.funsel().bits(funsel as u8) });
+    Ok(())
 }
 
 /// Enable a specific interrupt using the NVIC peripheral.

va108xx-hal/src/spi.rs

@@ -33,6 +33,7 @@ use embedded_hal::spi::{Mode, MODE_0};
 const FILL_DEPTH: usize = 12;
 
 pub const BMSTART_BMSTOP_MASK: u32 = 1 << 31;
+pub const BMSKIPDATA_MASK: u32 = 1 << 30;
 
 pub const DEFAULT_CLK_DIV: u16 = 2;
 
@@ -288,6 +289,7 @@ pub trait TransferConfigProvider {
 /// This struct contains all configuration parameter which are transfer specific
 /// and might change for transfers to different SPI slaves
 #[derive(Copy, Clone, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct TransferConfigWithHwcs<HwCs> {
     pub hw_cs: Option<HwCs>,
     pub cfg: TransferConfig,
@@ -296,6 +298,7 @@ pub struct TransferConfigWithHwcs<HwCs> {
 /// Type erased variant of the transfer configuration. This is required to avoid generics in
 /// the SPI constructor.
 #[derive(Copy, Clone, Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct TransferConfig {
     pub clk_cfg: Option<SpiClkConfig>,
     pub mode: Option<Mode>,
@@ -383,6 +386,8 @@ impl<HwCs: HwCsProvider> TransferConfigProvider for TransferConfigWithHwcs<HwCs>
 }
 
 /// Configuration options for the whole SPI bus. See Programmer Guide p.92 for more details
+#[derive(Debug)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub struct SpiConfig {
     clk: SpiClkConfig,
     // SPI mode configuration
@@ -532,6 +537,7 @@ pub struct Spi<SpiInstance, Pins, Word = u8> {
     pins: Pins,
 }
 
+#[inline(always)]
 pub fn mode_to_cpo_cph_bit(mode: embedded_hal::spi::Mode) -> (bool, bool) {
     match mode {
         embedded_hal::spi::MODE_0 => (false, false),
@@ -575,6 +581,7 @@ impl SpiClkConfig {
 }
 
 #[derive(Debug, thiserror::Error)]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum SpiClkConfigError {
     #[error("division by zero")]
     DivIsZero,

va108xx-hal/src/uart/mod.rs

@@ -22,7 +22,7 @@ use crate::{
 };
 use embedded_hal_nb::serial::Read;
 
-#[derive(Debug)]
+#[derive(Debug, Clone, Copy)]
 #[cfg_attr(feature = "defmt", derive(defmt::Format))]
 pub enum Bank {
     A = 0,
@@ -381,6 +381,7 @@ pub struct BufferTooShortError {
 pub trait Instance: Deref<Target = uart_base::RegisterBlock> {
     const IDX: u8;
     const PERIPH_SEL: PeripheralSelect;
+    const PTR: *const uart_base::RegisterBlock;
 
     /// Retrieve the peripheral structure.
     ///
@@ -388,7 +389,11 @@ pub trait Instance: Deref<Target = uart_base::RegisterBlock> {
     ///
     /// This circumvents the safety guarantees of the HAL.
     unsafe fn steal() -> Self;
-    fn ptr() -> *const uart_base::RegisterBlock;
+
+    #[inline(always)]
+    fn ptr() -> *const uart_base::RegisterBlock {
+        Self::PTR
+    }
 
     /// Retrieve the type erased peripheral register block.
     ///
@@ -405,14 +410,11 @@ impl Instance for pac::Uarta {
     const IDX: u8 = 0;
 
     const PERIPH_SEL: PeripheralSelect = PeripheralSelect::Uart0;
+    const PTR: *const uart_base::RegisterBlock = Self::PTR;
 
     #[inline(always)]
     unsafe fn steal() -> Self {
-        pac::Peripherals::steal().uarta
-    }
-    #[inline(always)]
-    fn ptr() -> *const uart_base::RegisterBlock {
-        Self::ptr() as *const _
+        Self::steal()
     }
 }
 
@@ -420,14 +422,25 @@ impl Instance for pac::Uartb {
     const IDX: u8 = 1;
 
     const PERIPH_SEL: PeripheralSelect = PeripheralSelect::Uart1;
+    const PTR: *const uart_base::RegisterBlock = Self::PTR;
 
     #[inline(always)]
     unsafe fn steal() -> Self {
-        pac::Peripherals::steal().uartb
+        Self::steal()
     }
-    #[inline(always)]
-    fn ptr() -> *const uart_base::RegisterBlock {
-        Self::ptr() as *const _
+}
+
+impl Bank {
+    /// Retrieve the peripheral register block.
+    ///
+    /// # Safety
+    ///
+    /// Circumvents the HAL safety guarantees.
+    pub unsafe fn reg_block(&self) -> &'static uart_base::RegisterBlock {
+        match self {
+            Bank::A => unsafe { pac::Uarta::reg_block() },
+            Bank::B => unsafe { pac::Uartb::reg_block() },
+        }
     }
 }
 
@@ -794,14 +807,12 @@ pub fn disable_rx_interrupts(uart: &uart_base::RegisterBlock) {
 /// Serial receiver.
 ///
 /// Can be created by using the [Uart::split] or [UartBase::split] API.
-pub struct Rx<Uart> {
-    uart: Uart,
-}
+pub struct Rx<Uart>(Uart);
 
 impl<Uart: Instance> Rx<Uart> {
     #[inline(always)]
-    fn new(uart: Uart) -> Self {
-        Self { uart }
+    const fn new(uart: Uart) -> Self {
+        Self(uart)
     }
 
     /// Direct access to the peripheral structure.
@@ -810,13 +821,13 @@ impl<Uart: Instance> Rx<Uart> {
     ///
     /// You must ensure that only registers related to the operation of the RX side are used.
     #[inline(always)]
-    pub unsafe fn uart(&self) -> &Uart {
-        &self.uart
+    pub const unsafe fn uart(&self) -> &Uart {
+        &self.0
     }
 
     #[inline]
     pub fn clear_fifo(&self) {
-        self.uart.fifo_clr().write(|w| w.rxfifo().set_bit());
+        self.0.fifo_clr().write(|w| w.rxfifo().set_bit());
     }
 
     #[inline]
@@ -846,7 +857,7 @@ impl<Uart: Instance> Rx<Uart> {
     /// value if you use the manual parity mode. See chapter 4.6.2 for more information.
     #[inline(always)]
     pub fn read_fifo(&self) -> nb::Result<u32, Infallible> {
-        if self.uart.rxstatus().read().rdavl().bit_is_clear() {
+        if self.0.rxstatus().read().rdavl().bit_is_clear() {
             return Err(nb::Error::WouldBlock);
         }
         Ok(self.read_fifo_unchecked())
@@ -862,7 +873,7 @@ impl<Uart: Instance> Rx<Uart> {
     /// value if you use the manual parity mode. See chapter 4.6.2 for more information.
     #[inline(always)]
     pub fn read_fifo_unchecked(&self) -> u32 {
-        self.uart.data().read().bits()
+        self.0.data().read().bits()
     }
 
     pub fn into_rx_with_irq(self) -> RxWithInterrupt<Uart> {
@@ -871,7 +882,7 @@ impl<Uart: Instance> Rx<Uart> {
 
     #[inline(always)]
     pub fn release(self) -> Uart {
-        self.uart
+        self.0
     }
 }
 
@@ -959,9 +970,7 @@ pub fn disable_tx_interrupts(uart: &uart_base::RegisterBlock) {
 /// Serial transmitter
 ///
 /// Can be created by using the [Uart::split] or [UartBase::split] API.
-pub struct Tx<Uart> {
-    uart: Uart,
-}
+pub struct Tx<Uart>(Uart);
 
 impl<Uart: Instance> Tx<Uart> {
     /// Retrieve a TX pin without expecting an explicit UART structure
@@ -971,14 +980,12 @@ impl<Uart: Instance> Tx<Uart> {
     /// Circumvents the HAL safety guarantees.
     #[inline(always)]
     pub unsafe fn steal() -> Self {
-        Self {
-            uart: Uart::steal(),
-        }
+        Self(Uart::steal())
     }
 
     #[inline(always)]
     fn new(uart: Uart) -> Self {
-        Self { uart }
+        Self(uart)
     }
 
     /// Direct access to the peripheral structure.
@@ -987,25 +994,23 @@ impl<Uart: Instance> Tx<Uart> {
     ///
     /// You must ensure that only registers related to the operation of the TX side are used.
     #[inline(always)]
-    pub unsafe fn uart(&self) -> &Uart {
-        &self.uart
+    pub const unsafe fn uart(&self) -> &Uart {
+        &self.0
     }
 
     #[inline]
     pub fn clear_fifo(&self) {
-        self.uart.fifo_clr().write(|w| w.txfifo().set_bit());
+        self.0.fifo_clr().write(|w| w.txfifo().set_bit());
     }
 
     #[inline]
     pub fn enable(&mut self) {
-        // Safety: We own the UART structure
-        enable_tx(unsafe { Uart::reg_block() });
+        self.0.enable().modify(|_, w| w.txenable().set_bit());
     }
 
     #[inline]
     pub fn disable(&mut self) {
-        // Safety: We own the UART structure
-        disable_tx(unsafe { Uart::reg_block() });
+        self.0.enable().modify(|_, w| w.txenable().clear_bit());
     }
 
     /// Enables the IRQ_TX, IRQ_TX_STATUS and IRQ_TX_EMPTY interrupts.
@@ -1037,7 +1042,7 @@ impl<Uart: Instance> Tx<Uart> {
     /// value if you use the manual parity mode. See chapter 11.4.1 for more information.
     #[inline(always)]
     pub fn write_fifo(&self, data: u32) -> nb::Result<(), Infallible> {
-        if self.uart.txstatus().read().wrrdy().bit_is_clear() {
+        if self.0.txstatus().read().wrrdy().bit_is_clear() {
             return Err(nb::Error::WouldBlock);
         }
         self.write_fifo_unchecked(data);
@@ -1052,7 +1057,7 @@ impl<Uart: Instance> Tx<Uart> {
     /// API.
     #[inline(always)]
     pub fn write_fifo_unchecked(&self, data: u32) {
-        self.uart.data().write(|w| unsafe { w.bits(data) });
+        self.0.data().write(|w| unsafe { w.bits(data) });
     }
 
     pub fn into_async(self) -> TxAsync<Uart> {
@@ -1135,7 +1140,7 @@ impl<Uart: Instance> RxWithInterrupt<Uart> {
 
     #[inline(always)]
     pub fn uart(&self) -> &Uart {
-        &self.0.uart
+        &self.0 .0
     }
 
     /// This function is used together with the [Self::on_interrupt_max_size_or_timeout_based]

va108xx-hal/src/uart/rx_asynch.rs

@@ -1,18 +1,16 @@
-//! # Async UART reception functionality for the VA108xx family.
+//! # Async UART reception functionality for the VA416xx family.
 //!
-//! This module provides the [RxAsync] and [RxAsyncSharedConsumer] struct which both implement the
+//! This module provides the [RxAsync] and [RxAsyncOverwriting] struct which both implement the
 //! [embedded_io_async::Read] trait.
 //! This trait allows for asynchronous reception of data streams. Please note that this module does
 //! not specify/declare the interrupt handlers which must be provided for async support to work.
-//! However, it provides four interrupt handlers:
+//! However, it provides two interrupt handlers:
 //!
-//! - [on_interrupt_uart_a]
-//! - [on_interrupt_uart_b]
-//! - [on_interrupt_uart_a_overwriting]
-//! - [on_interrupt_uart_b_overwriting]
+//! - [on_interrupt_rx]
+//! - [on_interrupt_rx_overwriting]
 //!
 //! The first two are used for the [RxAsync] struct, while the latter two are used with the
-//! [RxAsyncSharedConsumer] struct. The later two will overwrite old values in the used ring buffer.
+//! [RxAsyncOverwriting] struct. The later two will overwrite old values in the used ring buffer.
 //!
 //! Error handling is performed in the user interrupt handler by checking the [AsyncUartErrors]
 //! structure returned by the interrupt handlers.
@@ -25,11 +23,10 @@ use core::{cell::RefCell, convert::Infallible, future::Future, sync::atomic::Ord
 use critical_section::Mutex;
 use embassy_sync::waitqueue::AtomicWaker;
 use embedded_io::ErrorType;
-use heapless::spsc::Consumer;
 use portable_atomic::AtomicBool;
-use va108xx as pac;
+use va108xx::uarta as uart_base;
 
-use super::{Instance, Rx, RxError, UartErrors};
+use super::{Bank, Instance, Rx, RxError, UartErrors};
 
 static UART_RX_WAKERS: [AtomicWaker; 2] = [const { AtomicWaker::new() }; 2];
 static RX_READ_ACTIVE: [AtomicBool; 2] = [const { AtomicBool::new(false) }; 2];
@@ -72,7 +69,7 @@ pub struct AsyncUartErrors {
     pub uart_errors: UartErrors,
 }
 
-fn on_interrupt_handle_rx_errors<Uart: Instance>(uart: &Uart) -> Option<UartErrors> {
+fn on_interrupt_handle_rx_errors(uart: &'static uart_base::RegisterBlock) -> Option<UartErrors> {
     let rx_status = uart.rxstatus().read();
     if rx_status.rxovr().bit_is_set()
         || rx_status.rxfrm().bit_is_set()
@@ -94,81 +91,65 @@ fn on_interrupt_handle_rx_errors<Uart: Instance>(uart: &Uart) -> Option<UartErro
     None
 }
 
-fn on_interrupt_rx_common_post_processing<Uart: Instance>(
-    uart: &Uart,
+fn on_interrupt_rx_common_post_processing(
+    bank: Bank,
     rx_enabled: bool,
     read_some_data: bool,
     irq_end: u32,
 ) -> Option<UartErrors> {
+    let idx = bank as usize;
     if read_some_data {
-        RX_HAS_DATA[Uart::IDX as usize].store(true, Ordering::Relaxed);
-        if RX_READ_ACTIVE[Uart::IDX as usize].load(Ordering::Relaxed) {
-            UART_RX_WAKERS[Uart::IDX as usize].wake();
+        RX_HAS_DATA[idx].store(true, Ordering::Relaxed);
+        if RX_READ_ACTIVE[idx].load(Ordering::Relaxed) {
+            UART_RX_WAKERS[idx].wake();
         }
     }
 
     let mut errors = None;
+    let uart_regs = unsafe { bank.reg_block() };
     // Check for RX errors
     if rx_enabled {
-        errors = on_interrupt_handle_rx_errors(uart);
+        errors = on_interrupt_handle_rx_errors(uart_regs);
     }
 
     // Clear the interrupt status bits
-    uart.irq_clr().write(|w| unsafe { w.bits(irq_end) });
+    uart_regs.irq_clr().write(|w| unsafe { w.bits(irq_end) });
     errors
 }
 
-/// Interrupt handler for UART A.
+/// Interrupt handler with overwriting behaviour when the ring buffer is full.
 ///
 /// Should be called in the user interrupt handler to enable
 /// asynchronous reception. This variant will overwrite old data in the ring buffer in case
 /// the ring buffer is full.
-pub fn on_interrupt_uart_a_overwriting<const N: usize>(
+pub fn on_interrupt_rx_overwriting<const N: usize>(
+    bank: Bank,
     prod: &mut heapless::spsc::Producer<u8, N>,
     shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
 ) -> Result<(), AsyncUartErrors> {
-    on_interrupt_rx_async_heapless_queue_overwriting(
-        unsafe { pac::Uarta::steal() },
-        prod,
-        shared_consumer,
-    )
+    on_interrupt_rx_async_heapless_queue_overwriting(bank, prod, shared_consumer)
 }
 
-/// Interrupt handler for UART B.
-///
-/// Should be called in the user interrupt handler to enable
-/// asynchronous reception. This variant will overwrite old data in the ring buffer in case
-/// the ring buffer is full.
-pub fn on_interrupt_uart_b_overwriting<const N: usize>(
+pub fn on_interrupt_rx_async_heapless_queue_overwriting<const N: usize>(
+    bank: Bank,
     prod: &mut heapless::spsc::Producer<u8, N>,
     shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
 ) -> Result<(), AsyncUartErrors> {
-    on_interrupt_rx_async_heapless_queue_overwriting(
-        unsafe { pac::Uartb::steal() },
-        prod,
-        shared_consumer,
-    )
-}
-
-pub fn on_interrupt_rx_async_heapless_queue_overwriting<Uart: Instance, const N: usize>(
-    uart: Uart,
-    prod: &mut heapless::spsc::Producer<u8, N>,
-    shared_consumer: &Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
-) -> Result<(), AsyncUartErrors> {
-    let irq_end = uart.irq_end().read();
-    let enb_status = uart.enable().read();
+    let uart_regs = unsafe { bank.reg_block() };
+    let irq_end = uart_regs.irq_end().read();
+    let enb_status = uart_regs.enable().read();
     let rx_enabled = enb_status.rxenable().bit_is_set();
     let mut read_some_data = false;
     let mut queue_overflow = false;
 
     // Half-Full interrupt. We have a guaranteed amount of data we can read.
     if irq_end.irq_rx().bit_is_set() {
-        let available_bytes = uart.rxfifoirqtrg().read().bits() as usize;
+        let available_bytes = uart_regs.rxfifoirqtrg().read().bits() as usize;
 
         // If this interrupt bit is set, the trigger level is available at the very least.
         // Read everything as fast as possible
         for _ in 0..available_bytes {
-            let byte = uart.data().read().bits();
+            let byte = uart_regs.data().read().bits();
             if !prod.ready() {
                 queue_overflow = true;
                 critical_section::with(|cs| {
@@ -183,9 +164,9 @@ pub fn on_interrupt_rx_async_heapless_queue_overwriting<Uart: Instance, const N:
 
     // Timeout, empty the FIFO completely.
     if irq_end.irq_rx_to().bit_is_set() {
-        while uart.rxstatus().read().rdavl().bit_is_set() {
+        while uart_regs.rxstatus().read().rdavl().bit_is_set() {
             // While there is data in the FIFO, write it into the reception buffer
-            let byte = uart.data().read().bits();
+            let byte = uart_regs.data().read().bits();
             if !prod.ready() {
                 queue_overflow = true;
                 critical_section::with(|cs| {
@@ -199,7 +180,7 @@ pub fn on_interrupt_rx_async_heapless_queue_overwriting<Uart: Instance, const N:
     }
 
     let uart_errors =
-        on_interrupt_rx_common_post_processing(&uart, rx_enabled, read_some_data, irq_end.bits());
+        on_interrupt_rx_common_post_processing(bank, rx_enabled, read_some_data, irq_end.bits());
     if uart_errors.is_some() || queue_overflow {
         return Err(AsyncUartErrors {
             queue_overflow,
@@ -209,29 +190,21 @@ pub fn on_interrupt_rx_async_heapless_queue_overwriting<Uart: Instance, const N:
     Ok(())
 }
 
-/// Interrupt handler for UART A.
+/// Interrupt handler for asynchronous RX operations.
 ///
 /// Should be called in the user interrupt handler to enable asynchronous reception.
-pub fn on_interrupt_uart_a<const N: usize>(
+pub fn on_interrupt_rx<const N: usize>(
+    bank: Bank,
     prod: &mut heapless::spsc::Producer<'_, u8, N>,
 ) -> Result<(), AsyncUartErrors> {
-    on_interrupt_rx_async_heapless_queue(unsafe { pac::Uarta::steal() }, prod)
+    on_interrupt_rx_async_heapless_queue(bank, prod)
 }
 
-/// Interrupt handler for UART B.
-///
-/// Should be called in the user interrupt handler to enable asynchronous reception.
-pub fn on_interrupt_uart_b<const N: usize>(
+pub fn on_interrupt_rx_async_heapless_queue<const N: usize>(
+    bank: Bank,
     prod: &mut heapless::spsc::Producer<'_, u8, N>,
 ) -> Result<(), AsyncUartErrors> {
-    on_interrupt_rx_async_heapless_queue(unsafe { pac::Uartb::steal() }, prod)
-}
-
-pub fn on_interrupt_rx_async_heapless_queue<Uart: Instance, const N: usize>(
-    uart: Uart,
-    prod: &mut heapless::spsc::Producer<'_, u8, N>,
-) -> Result<(), AsyncUartErrors> {
-    //let uart = unsafe { Uart::steal() };
+    let uart = unsafe { bank.reg_block() };
     let irq_end = uart.irq_end().read();
     let enb_status = uart.enable().read();
     let rx_enabled = enb_status.rxenable().bit_is_set();
@@ -268,7 +241,7 @@ pub fn on_interrupt_rx_async_heapless_queue<Uart: Instance, const N: usize>(
     }
 
     let uart_errors =
-        on_interrupt_rx_common_post_processing(&uart, rx_enabled, read_some_data, irq_end.bits());
+        on_interrupt_rx_common_post_processing(bank, rx_enabled, read_some_data, irq_end.bits());
     if uart_errors.is_some() || queue_overflow {
         return Err(AsyncUartErrors {
             queue_overflow,
@@ -286,24 +259,32 @@ impl Drop for ActiveReadGuard {
     }
 }
 
-/// Core data structure to allow asynchronous UART reception.
-///
-/// If the ring buffer becomes full, data will be lost.
-pub struct RxAsync<Uart: Instance, const N: usize> {
+struct RxAsyncInner<Uart: Instance, const N: usize> {
     rx: Rx<Uart>,
     pub queue: heapless::spsc::Consumer<'static, u8, N>,
 }
 
+/// Core data structure to allow asynchronous UART reception.
+///
+/// If the ring buffer becomes full, data will be lost.
+pub struct RxAsync<Uart: Instance, const N: usize>(Option<RxAsyncInner<Uart, N>>);
+
 impl<Uart: Instance, const N: usize> ErrorType for RxAsync<Uart, N> {
     /// Error reporting is done using the result of the interrupt functions.
     type Error = Infallible;
 }
 
+fn stop_async_rx<Uart: Instance>(rx: &mut Rx<Uart>) {
+    rx.disable_interrupts();
+    rx.disable();
+    rx.clear_fifo();
+}
+
 impl<Uart: Instance, const N: usize> RxAsync<Uart, N> {
     /// Create a new asynchronous receiver.
     ///
     /// The passed [heapless::spsc::Consumer] will be used to asynchronously receive data which
-    /// is filled by the interrupt handler.
+    /// is filled by the interrupt handler [on_interrupt_rx].
     pub fn new(mut rx: Rx<Uart>, queue: heapless::spsc::Consumer<'static, u8, N>) -> Self {
         rx.disable_interrupts();
         rx.disable();
@@ -313,7 +294,23 @@ impl<Uart: Instance, const N: usize> RxAsync<Uart, N> {
             rx.enable_interrupts();
             rx.enable();
         });
-        Self { rx, queue }
+        Self(Some(RxAsyncInner { rx, queue }))
+    }
+
+    pub fn stop(&mut self) {
+        stop_async_rx(&mut self.0.as_mut().unwrap().rx);
+    }
+
+    pub fn release(mut self) -> (Rx<Uart>, heapless::spsc::Consumer<'static, u8, N>) {
+        self.stop();
+        let inner = self.0.take().unwrap();
+        (inner.rx, inner.queue)
+    }
+}
+
+impl<Uart: Instance, const N: usize> Drop for RxAsync<Uart, N> {
+    fn drop(&mut self) {
+        self.stop();
     }
 }
 
@@ -321,7 +318,7 @@ impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsync<Uart, N
     async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
         // Need to wait for the IRQ to read data and set this flag. If the queue is not
         // empty, we can read data immediately.
-        if self.queue.len() == 0 {
+        if self.0.as_ref().unwrap().queue.len() == 0 {
             RX_HAS_DATA[Uart::IDX as usize].store(false, Ordering::Relaxed);
         }
         let _guard = ActiveReadGuard(Uart::IDX as usize);
@@ -333,33 +330,38 @@ impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsync<Uart, N
             }
             data_to_read
         };
-        let fut = RxFuture::new(&mut self.rx);
+        let mut_ref = self.0.as_mut().unwrap();
+        let fut = RxFuture::new(&mut mut_ref.rx);
         // Data is available, so read that data immediately.
-        let read_data = handle_data_in_queue(&mut self.queue);
+        let read_data = handle_data_in_queue(&mut mut_ref.queue);
         if read_data > 0 {
             return Ok(read_data);
         }
         // Await data.
         let _ = fut.await;
-        Ok(handle_data_in_queue(&mut self.queue))
+        Ok(handle_data_in_queue(&mut mut_ref.queue))
     }
 }
 
+struct RxAsyncOverwritingInner<Uart: Instance, const N: usize> {
+    rx: Rx<Uart>,
+    pub shared_consumer: &'static Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+}
+
 /// Core data structure to allow asynchronous UART reception.
 ///
 /// If the ring buffer becomes full, the oldest data will be overwritten when using the
-/// [on_interrupt_uart_a_overwriting] and [on_interrupt_uart_b_overwriting] interrupt handlers.
-pub struct RxAsyncSharedConsumer<Uart: Instance, const N: usize> {
-    rx: Rx<Uart>,
-    queue: &'static Mutex<RefCell<Option<Consumer<'static, u8, N>>>>,
-}
+/// [on_interrupt_rx_overwriting] interrupt handlers.
+pub struct RxAsyncOverwriting<Uart: Instance, const N: usize>(
+    Option<RxAsyncOverwritingInner<Uart, N>>,
+);
 
-impl<Uart: Instance, const N: usize> ErrorType for RxAsyncSharedConsumer<Uart, N> {
+impl<Uart: Instance, const N: usize> ErrorType for RxAsyncOverwriting<Uart, N> {
     /// Error reporting is done using the result of the interrupt functions.
     type Error = Infallible;
 }
 
-impl<Uart: Instance, const N: usize> RxAsyncSharedConsumer<Uart, N> {
+impl<Uart: Instance, const N: usize> RxAsyncOverwriting<Uart, N> {
     /// Create a new asynchronous receiver.
     ///
     /// The passed shared [heapless::spsc::Consumer] will be used to asynchronously receive data
@@ -367,7 +369,7 @@ impl<Uart: Instance, const N: usize> RxAsyncSharedConsumer<Uart, N> {
     /// interrupt handler to overwrite old data.
     pub fn new(
         mut rx: Rx<Uart>,
-        queue: &'static Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
+        shared_consumer: &'static Mutex<RefCell<Option<heapless::spsc::Consumer<'static, u8, N>>>>,
     ) -> Self {
         rx.disable_interrupts();
         rx.disable();
@@ -377,25 +379,44 @@ impl<Uart: Instance, const N: usize> RxAsyncSharedConsumer<Uart, N> {
             rx.enable_interrupts();
             rx.enable();
         });
-        Self { rx, queue }
+        Self(Some(RxAsyncOverwritingInner {
+            rx,
+            shared_consumer,
+        }))
+    }
+
+    pub fn stop(&mut self) {
+        stop_async_rx(&mut self.0.as_mut().unwrap().rx);
+    }
+
+    pub fn release(mut self) -> Rx<Uart> {
+        self.stop();
+        let inner = self.0.take().unwrap();
+        inner.rx
     }
 }
 
-impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsyncSharedConsumer<Uart, N> {
+impl<Uart: Instance, const N: usize> Drop for RxAsyncOverwriting<Uart, N> {
+    fn drop(&mut self) {
+        self.stop();
+    }
+}
+
+impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsyncOverwriting<Uart, N> {
     async fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::Error> {
         // Need to wait for the IRQ to read data and set this flag. If the queue is not
         // empty, we can read data immediately.
 
         critical_section::with(|cs| {
-            let queue = self.queue.borrow(cs);
+            let queue = self.0.as_ref().unwrap().shared_consumer.borrow(cs);
             if queue.borrow().as_ref().unwrap().len() == 0 {
                 RX_HAS_DATA[Uart::IDX as usize].store(false, Ordering::Relaxed);
             }
         });
         let _guard = ActiveReadGuard(Uart::IDX as usize);
-        let mut handle_data_in_queue = || {
+        let mut handle_data_in_queue = |inner: &mut RxAsyncOverwritingInner<Uart, N>| {
             critical_section::with(|cs| {
-                let mut consumer_ref = self.queue.borrow(cs).borrow_mut();
+                let mut consumer_ref = inner.shared_consumer.borrow(cs).borrow_mut();
                 let consumer = consumer_ref.as_mut().unwrap();
                 let data_to_read = consumer.len().min(buf.len());
                 for byte in buf.iter_mut().take(data_to_read) {
@@ -405,15 +426,15 @@ impl<Uart: Instance, const N: usize> embedded_io_async::Read for RxAsyncSharedCo
                 data_to_read
             })
         };
-        let fut = RxFuture::new(&mut self.rx);
+        let fut = RxFuture::new(&mut self.0.as_mut().unwrap().rx);
         // Data is available, so read that data immediately.
-        let read_data = handle_data_in_queue();
+        let read_data = handle_data_in_queue(self.0.as_mut().unwrap());
         if read_data > 0 {
             return Ok(read_data);
         }
         // Await data.
         let _ = fut.await;
-        let read_data = handle_data_in_queue();
+        let read_data = handle_data_in_queue(self.0.as_mut().unwrap());
         Ok(read_data)
     }
 }

va108xx-hal/src/uart/tx_asynch.rs

@@ -3,13 +3,10 @@
 //! This module provides the [TxAsync] struct which implements the [embedded_io_async::Write] trait.
 //! This trait allows for asynchronous sending of data streams. Please note that this module does
 //! not specify/declare the interrupt handlers which must be provided for async support to work.
-//! However, it provides two interrupt handlers:
+//! However, it the [on_interrupt_tx] interrupt handler.
 //!
-//! - [on_interrupt_uart_a_tx]
-//! - [on_interrupt_uart_b_tx]
-//!
-//! Those should be called in ALL user interrupt handlers which handle UART TX interrupts,
-//! depending on which UARTs are used.
+//! This handler should be called in ALL user interrupt handlers which handle UART TX interrupts
+//! for a given UART bank.
 //!
 //! # Example
 //!
@@ -30,21 +27,14 @@ static TX_CONTEXTS: [Mutex<RefCell<TxContext>>; 2] =
 // critical section.
 static TX_DONE: [AtomicBool; 2] = [const { AtomicBool::new(false) }; 2];
 
-/// This is a generic interrupt handler to handle asynchronous UART TX operations. The user
-/// has to call this once in the interrupt handler responsible for UART A TX interrupts for
-/// asynchronous operations to work.
-pub fn on_interrupt_uart_a_tx() {
-    on_interrupt_uart_tx(unsafe { pac::Uarta::steal() });
-}
-
-/// This is a generic interrupt handler to handle asynchronous UART TX operations. The user
-/// has to call this once in the interrupt handler responsible for UART B TX interrupts for
-/// asynchronous operations to work.
-pub fn on_interrupt_uart_b_tx() {
-    on_interrupt_uart_tx(unsafe { pac::Uartb::steal() });
-}
-
-fn on_interrupt_uart_tx<Uart: Instance>(uart: Uart) {
+/// This is a generic interrupt handler to handle asynchronous UART TX operations for a given
+/// UART bank.
+///
+/// The user has to call this once in the interrupt handler responsible for the TX interrupts on
+/// the given UART bank.
+pub fn on_interrupt_tx(bank: Bank) {
+    let uart = unsafe { bank.reg_block() };
+    let idx = bank as usize;
     let irq_enb = uart.irq_enb().read();
     // IRQ is not related to TX.
     if irq_enb.irq_tx().bit_is_clear() || irq_enb.irq_tx_empty().bit_is_clear() {
@@ -54,7 +44,7 @@ fn on_interrupt_uart_tx<Uart: Instance>(uart: Uart) {
     let tx_status = uart.txstatus().read();
     let unexpected_overrun = tx_status.wrlost().bit_is_set();
     let mut context = critical_section::with(|cs| {
-        let context_ref = TX_CONTEXTS[Uart::IDX as usize].borrow(cs);
+        let context_ref = TX_CONTEXTS[idx].borrow(cs);
         *context_ref.borrow()
     });
     context.tx_overrun = unexpected_overrun;
@@ -67,12 +57,12 @@ fn on_interrupt_uart_tx<Uart: Instance>(uart: Uart) {
         uart.enable().modify(|_, w| w.txenable().clear_bit());
         // Write back updated context structure.
         critical_section::with(|cs| {
-            let context_ref = TX_CONTEXTS[Uart::IDX as usize].borrow(cs);
+            let context_ref = TX_CONTEXTS[idx].borrow(cs);
             *context_ref.borrow_mut() = context;
         });
         // Transfer is done.
-        TX_DONE[Uart::IDX as usize].store(true, core::sync::atomic::Ordering::Relaxed);
-        UART_TX_WAKERS[Uart::IDX as usize].wake();
+        TX_DONE[idx].store(true, core::sync::atomic::Ordering::Relaxed);
+        UART_TX_WAKERS[idx].wake();
         return;
     }
     // Safety: We documented that the user provided slice must outlive the future, so we convert
@@ -92,7 +82,7 @@ fn on_interrupt_uart_tx<Uart: Instance>(uart: Uart) {
 
     // Write back updated context structure.
     critical_section::with(|cs| {
-        let context_ref = TX_CONTEXTS[Uart::IDX as usize].borrow(cs);
+        let context_ref = TX_CONTEXTS[idx].borrow(cs);
         *context_ref.borrow_mut() = context;
     });
 }

va108xx/CHANGELOG.md

@@ -8,6 +8,10 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 
 ## [unreleased]
 
+## [v0.5.0] 2025-02-17
+
+- Re-generated PAC with `svd2rust` v0.35.0 and added optional `defmt` and `Debug` implementations
+
 ## [v0.4.0] 2025-02-12
 
 - Re-generated PAC with `svd2rust` v0.35.0

va108xx/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "va108xx"
-version = "0.4.0"
+version = "0.5.0"
 authors = ["Robin Mueller <muellerr@irs.uni-stuttgart.de>"]
 edition = "2021"
 description = "PAC for the Vorago VA108xx family of microcontrollers"
@@ -13,6 +13,7 @@ categories = ["embedded", "no-std", "hardware-support"]
 [dependencies]
 cortex-m = "0.7"
 vcell = "0.1.3"
+defmt = { version = "0.3", optional = true }
 critical-section = { version = "1", optional = true }
 
 [dependencies.cortex-m-rt]
@@ -21,6 +22,8 @@ version = ">=0.6.15,<0.8"
 
 [features]
 rt = ["cortex-m-rt/device"]
+# Adds Debug implementation
+debug = []
 
 [package.metadata.docs.rs]
 all-features = true

va108xx/README.md

@@ -26,6 +26,12 @@ The `rt` feature is optional and recommended. It brings in support for `cortex-m
 For full details on the autgenerated API, please see the
 [svd2rust documentation](https://docs.rs/svd2rust/latest/svd2rust/#peripheral-api).
 
+## Optional Features
+
+- [`defmt`](https://defmt.ferrous-systems.com/): Add support for `defmt` by adding the
+  [`defmt::Format`](https://defmt.ferrous-systems.com/format) derive on many types.
+- `debug`: Add `Debug` derives for various structures
+
 ## Regenerating the PAC
 
 If you want to re-generate the PAC, for example if the register file `va416xx.svd` changes

va108xx/gen-helper.sh

@@ -30,7 +30,7 @@ fi
 
 svdtools patch svd/va108xx-patch.yml
 # See https://github.com/rust-embedded/svd2rust/issues/830 for required re-export.
-${svd2rust_bin} --reexport-interrupt -i svd/va108xx.svd.patched
+${svd2rust_bin} --reexport-interrupt --impl-defmt defmt --impl-debug-feature debug -i svd/va108xx.svd.patched
 
 result=$?
 if [ $result -ne 0 ]; then

va108xx/src/i2ca/address.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<AddressSpec>;
 #[doc = "Register `ADDRESS` writer"]
 pub type W = crate::W<AddressSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/clktolimit.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<ClktolimitSpec>;
 #[doc = "Register `CLKTOLIMIT` writer"]
 pub type W = crate::W<ClktolimitSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/cmd.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<CmdSpec>;
 #[doc = "Register `CMD` writer"]
 pub type W = crate::W<CmdSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/data.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<DataSpec>;
 #[doc = "Register `DATA` writer"]
 pub type W = crate::W<DataSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/rxcount.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `RXCOUNT` reader"]
 pub type R = crate::R<RxcountSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/rxfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<RxfifoirqtrgSpec>;
 #[doc = "Register `RXFIFOIRQTRG` writer"]
 pub type W = crate::W<RxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_address.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0AddressSpec>;
 #[doc = "Register `S0_ADDRESS` writer"]
 pub type W = crate::W<S0AddressSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_addressb.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0AddressbSpec>;
 #[doc = "Register `S0_ADDRESSB` writer"]
 pub type W = crate::W<S0AddressbSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_addressmask.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0AddressmaskSpec>;
 #[doc = "Register `S0_ADDRESSMASK` writer"]
 pub type W = crate::W<S0AddressmaskSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_addressmaskb.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0AddressmaskbSpec>;
 #[doc = "Register `S0_ADDRESSMASKB` writer"]
 pub type W = crate::W<S0AddressmaskbSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_data.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0DataSpec>;
 #[doc = "Register `S0_DATA` writer"]
 pub type W = crate::W<S0DataSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_lastaddress.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `S0_LASTADDRESS` reader"]
 pub type R = crate::R<S0LastaddressSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_maxwords.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0MaxwordsSpec>;
 #[doc = "Register `S0_MAXWORDS` writer"]
 pub type W = crate::W<S0MaxwordsSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_rxcount.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `S0_RXCOUNT` reader"]
 pub type R = crate::R<S0RxcountSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_rxfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0RxfifoirqtrgSpec>;
 #[doc = "Register `S0_RXFIFOIRQTRG` writer"]
 pub type W = crate::W<S0RxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_state.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `S0_STATE` reader"]
 pub type R = crate::R<S0StateSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_txcount.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `S0_TXCOUNT` reader"]
 pub type R = crate::R<S0TxcountSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/s0_txfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<S0TxfifoirqtrgSpec>;
 #[doc = "Register `S0_TXFIFOIRQTRG` writer"]
 pub type W = crate::W<S0TxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/state.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `STATE` reader"]
 pub type R = crate::R<StateSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/tmconfig.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<TmconfigSpec>;
 #[doc = "Register `TMCONFIG` writer"]
 pub type W = crate::W<TmconfigSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/txcount.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `TXCOUNT` reader"]
 pub type R = crate::R<TxcountSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/txfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<TxfifoirqtrgSpec>;
 #[doc = "Register `TXFIFOIRQTRG` writer"]
 pub type W = crate::W<TxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/i2ca/words.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<WordsSpec>;
 #[doc = "Register `WORDS` writer"]
 pub type W = crate::W<WordsSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/ioconfig/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/ioconfig/porta.rs

@@ -3,6 +3,7 @@ pub type R = crate::R<PortaSpec>;
 #[doc = "Register `PORTA[%s]` writer"]
 pub type W = crate::W<PortaSpec>;
 #[doc = "Input Filter Selectoin\n\nValue on reset: 0"]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[derive(Clone, Copy, Debug, PartialEq, Eq)]
 #[repr(u8)]
 pub enum Flttype {

va108xx/src/irqsel/int_ram_sbe.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IntRamSbeSpec>;
 #[doc = "Register `INT_RAM_SBE` writer"]
 pub type W = crate::W<IntRamSbeSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/irqsel/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/lib.rs

@@ -97,6 +97,7 @@ pub static __INTERRUPTS: [Vector; 32] = [
     Vector { _handler: OC31 },
 ];
 #[doc = r"Enumeration of all the interrupts."]
+#[cfg_attr(feature = "defmt", derive(defmt::Format))]
 #[derive(Copy, Clone, Debug, PartialEq, Eq)]
 #[repr(u16)]
 pub enum Interrupt {

va108xx/src/porta/datain.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `DATAIN` reader"]
 pub type R = crate::R<DatainSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/datainbyte.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `DATAINBYTE[%s]` reader"]
 pub type R = crate::R<DatainbyteSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/datamask.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<DatamaskSpec>;
 #[doc = "Register `DATAMASK` writer"]
 pub type W = crate::W<DatamaskSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/datamaskbyte.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<DatamaskbyteSpec>;
 #[doc = "Register `DATAMASKBYTE[%s]` writer"]
 pub type W = crate::W<DatamaskbyteSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/dataout.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `DATAOUT` writer"]
 pub type W = crate::W<DataoutSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for crate::generic::Reg<DataoutSpec> {
     fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
         write!(f, "(not readable)")

va108xx/src/porta/dataoutbyte.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `DATAOUTBYTE[%s]` writer"]
 pub type W = crate::W<DataoutbyteSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for crate::generic::Reg<DataoutbyteSpec> {
     fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
         write!(f, "(not readable)")

va108xx/src/porta/edge_status.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<EdgeStatusSpec>;
 #[doc = "Register `EDGE_STATUS` writer"]
 pub type W = crate::W<EdgeStatusSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_edge.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IrqEdgeSpec>;
 #[doc = "Register `IRQ_EDGE` writer"]
 pub type W = crate::W<IrqEdgeSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_enb.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IrqEnbSpec>;
 #[doc = "Register `IRQ_ENB` writer"]
 pub type W = crate::W<IrqEnbSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_end.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `IRQ_END` reader"]
 pub type R = crate::R<IrqEndSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_evt.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IrqEvtSpec>;
 #[doc = "Register `IRQ_EVT` writer"]
 pub type W = crate::W<IrqEvtSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_raw.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `IRQ_RAW` reader"]
 pub type R = crate::R<IrqRawSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/irq_sen.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IrqSenSpec>;
 #[doc = "Register `IRQ_SEN` writer"]
 pub type W = crate::W<IrqSenSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/porta/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/clkprescale.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<ClkprescaleSpec>;
 #[doc = "Register `CLKPRESCALE` writer"]
 pub type W = crate::W<ClkprescaleSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/data.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<DataSpec>;
 #[doc = "Register `DATA` writer"]
 pub type W = crate::W<DataSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/rxfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<RxfifoirqtrgSpec>;
 #[doc = "Register `RXFIFOIRQTRG` writer"]
 pub type W = crate::W<RxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/state.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `STATE` reader"]
 pub type R = crate::R<StateSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/spia/txfifoirqtrg.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<TxfifoirqtrgSpec>;
 #[doc = "Register `TXFIFOIRQTRG` writer"]
 pub type W = crate::W<TxfifoirqtrgSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/ef_config.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `EF_CONFIG` reader"]
 pub type R = crate::R<EfConfigSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/ef_id.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `EF_ID` reader"]
 pub type R = crate::R<EfIdSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/ioconfig_clkdiv.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<IoconfigClkdivSpec>;
 #[doc = "Register `IOCONFIG_CLKDIV%s` writer"]
 pub type W = crate::W<IoconfigClkdivSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/ioconfig_clkdiv0.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `IOCONFIG_CLKDIV0` reader"]
 pub type R = crate::R<IoconfigClkdiv0Spec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/perid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PERID` reader"]
 pub type R = crate::R<PeridSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/procid.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `PROCID` reader"]
 pub type R = crate::R<ProcidSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/ram_sbe.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<RamSbeSpec>;
 #[doc = "Register `RAM_SBE` writer"]
 pub type W = crate::W<RamSbeSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/refresh_config.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<RefreshConfigSpec>;
 #[doc = "Register `REFRESH_CONFIG` writer"]
 pub type W = crate::W<RefreshConfigSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/rom_retries.rs

@@ -1,5 +1,6 @@
 #[doc = "Register `ROM_RETRIES` reader"]
 pub type R = crate::R<RomRetriesSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())

va108xx/src/sysconfig/tim_clk_enable.rs

@@ -2,6 +2,7 @@
 pub type R = crate::R<TimClkEnableSpec>;
 #[doc = "Register `TIM_CLK_ENABLE` writer"]
 pub type W = crate::W<TimClkEnableSpec>;
+#[cfg(feature = "debug")]
 impl core::fmt::Debug for R {
     fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
         write!(f, "{}", self.bits())